Large-aperture optical components are of paramount importance in domains such as integrated circuits,photolithography,aerospace,and inertial confinement fusion.However,measuring their surface profiles relies predomina...Large-aperture optical components are of paramount importance in domains such as integrated circuits,photolithography,aerospace,and inertial confinement fusion.However,measuring their surface profiles relies predominantly on the phase-shifting approach,which involves collecting multiple interferograms and imposes stringent demands on environmental stability.These issues significantly hinder its ability to achieve real-time and dynamic high-precision measurements.Therefore,this study proposes a high-precision large-aperture single-frame interferometric surface profile measurement(LA-SFISPM)method based on deep learning and explores its capability to realize dynamic measurements with high accuracy.The interferogram is matched to the phase by training the data measured using the small aperture.The consistency of the surface features of the small and large apertures is enhanced via contrast learning and feature-distribution alignment.Hence,high-precision phase reconstruction of large-aperture optical components can be achieved without using a phase shifter.The experimental results show that for the tested mirror withΦ=820 mm,the surface profile obtained from LA-SFISPM is subtracted point-by-point from the ground truth,resulting in a maximum single-point error of 4.56 nm.Meanwhile,the peak-to-valley(PV)value is 0.0758λ,and the simple repeatability of root mean square(SR-RMS)value is 0.00025λ,which aligns well with the measured results obtained by ZYGO.In particular,a significant reduction in the measurement time(reduced by a factor of 48)is achieved compared with that of the traditional phase-shifting method.Our proposed method provides an efficient,rapid,and accurate method for obtaining the surface profiles of optical components with different diameters without employing a phase-shifting approach,which is highly desired in large-aperture interferometric measurement systems.展开更多
We proposed a fiber optic high temperature sensor based on the Mach-Zehnder interference(MZI)structure,which is composed of two lengths of multi-mode fibers(MMFs),a length of few-mode fiber(FMF)and two sections of sin...We proposed a fiber optic high temperature sensor based on the Mach-Zehnder interference(MZI)structure,which is composed of two lengths of multi-mode fibers(MMFs),a length of few-mode fiber(FMF)and two sections of single-mode fibers(SMFs).Firstly,the two sections of MMFs were spliced with two sections of SMFs.Then,the MMFs were fused to two ends of FMF to form a symmetrically structured fiber-optic MZI structure.In this structure,the MMF served as the optical mode field coupling element,and the cladding and core of the FMF are the interference arm and the reference arm of the MZI structure,respectively.We investigated the sensor's response characteristics of the temperature and strain.The experimental results indicate that the sensor is sensitive to temperature variation,and the temperature response sensitivity is up to 61.4 pm/℃ in the range of 40-250℃,while the sensor has weak strain sensitivity,its strain sensitivity is only-0.72 pm/μe in the strain range of 0-1400μe.Moreover,the sensor has good stability and repeatability.In brief,the proposed fiber optic high temperature sensor has good properties,such as high sensitivity,compact structure,good stability and repeatability,which can be used for monitoring the temperature of submerged oil electric pump units under oil wells.展开更多
Sea topography information holds significant importance in oceanic research and the climate change detection.Radar imaging altimetry has emerged as the leading approach for global ocean observation,employing synthetic...Sea topography information holds significant importance in oceanic research and the climate change detection.Radar imaging altimetry has emerged as the leading approach for global ocean observation,employing synthetic aperture radar(SAR)interferometry to enhance the spatial resolution of Sea topography.Nevertheless,current payload capacity and satellite hardware limitations prevent the extension of the interferometric baseline by enlarging the physical antenna size.This constraint hinders achieving centimeter-level accuracy in interferometric altimetry.To address this challenge,we conducted a numerical simulation to assess the viability of a large baseline interferometric imaging altimeter(LB-IIA).By controlling the baseline within the range of 600-1000 m through spiral orbit design in two satellites and mitigating baseline de-correlation with the carrier frequency shift(CFS)technique,we aimed to overcome the above limitations.Our findings demonstrate the efficacy of the CFS technique in compensating for baseline decoherence,elevating coherence from less than 0.1 to over 0.85.Concurrently.The height difference accuracy between neighboring sea surfaces reaches 1 cm within a 1 km resolution.This study is anticipated to serve as a foundational reference for future interferometric imaging altimeter development,catering to the demand for high-precision sea topography data in accurate global bathymetry inversion.展开更多
Quantum interferometric power(IP), a discordlike measure, plays an important role in quantum metrology. We study the dynamics of IP for two-qubit X-shape states under different noisy environments. Our study shows that...Quantum interferometric power(IP), a discordlike measure, plays an important role in quantum metrology. We study the dynamics of IP for two-qubit X-shape states under different noisy environments. Our study shows that IP exhibits sudden change, and one side quantum channel is enough for the occurrence of a sudden change of IP. In particular, we show that the initial state having no sudden change of quantum discord exhibits a sudden change of IP under the dynamics of amplitude noise, but the converse is not true. Besides, we also investigate the dynamics of IP under two different kinds of composite noises. Our results also confirm that sudden change of IP occurs under such composite noises.展开更多
Quantum correlations that surpass entanglement are of great importance in the realms of quantum information processing and quantum computation.Essentially,for quantum systems prepared in pure states,it is difficult to...Quantum correlations that surpass entanglement are of great importance in the realms of quantum information processing and quantum computation.Essentially,for quantum systems prepared in pure states,it is difficult to differentiate between quantum entanglement and quantum correlation.Nonetheless,this indistinguishability is no longer holds for mixed states.To contribute to a better understanding of this differentiation,we have explored a simple model for both generating and measuring these quantum correlations.Our study concerns two macroscopic mechanical resonators placed in separate Fabry–Pérot cavities,coupled through the photon hopping process.this system offers a comprehensively way to investigate and quantify quantum correlations beyond entanglement between these mechanical modes.The key ingredient in analyzing quantum correlation in this system is the global covariance matrix.It forms the basis for computing two essential metrics:the logarithmic negativity(E_(N)^(m))and the Gaussian interferometric power(P_(G)^(m)).These metrics provide the tools to measure the degree of quantum entanglement and quantum correlations,respectively.Our study reveals that the Gaussian interferometric power(P_(G)^(m))proves to be a more suitable metric for characterizing quantum correlations among the mechanical modes in an optomechanical quantum system,particularly in scenarios featuring resilient photon hopping.展开更多
In source detection in the Tianlai project,locating the interferometric fringe in visibility data accurately will influence downstream tasks drastically,such as physical parameter estimation and weak source exploratio...In source detection in the Tianlai project,locating the interferometric fringe in visibility data accurately will influence downstream tasks drastically,such as physical parameter estimation and weak source exploration.Considering that traditional locating methods are time-consuming and supervised methods require a great quantity of expensive labeled data,in this paper,we first investigate characteristics of interferometric fringes in the simulation and real scenario separately,and integrate an almost parameter-free unsupervised clustering method and seeding filling or eraser algorithm to propose a hierarchical plug and play method to improve location accuracy.Then,we apply our method to locate single and multiple sources’interferometric fringes in simulation data.Next,we apply our method to real data taken from the Tianlai radio telescope array.Finally,we compare with unsupervised methods that are state of the art.These results show that our method has robustness in different scenarios and can improve location measurement accuracy effectively.展开更多
The coherence is a measure for the accuracy of the interferometric phase, and the synthetic aperture radar （SAR） inter- ferometric coherence is affected by several sources of the decor- relation noise. For the circu...The coherence is a measure for the accuracy of the interferometric phase, and the synthetic aperture radar （SAR） inter- ferometric coherence is affected by several sources of the decor- relation noise. For the circular SAR （CSAR） imaging geometry, the system response function is in the form of the Bessel function which brings a high sidelobe, and the high sidelobe of CSAR will be an important factor influencing the interferometric coherence. The effect of the high sidelobe on the coherence is analyzed and deduced. Based on the interferometric characteristics of the slight difference in the viewing angles and the potential pixel off- set in the interferometric SAR （InSAR） images, a relation between the radar impulse response and the coherence loss function is derived. From the relational model, the coherence loss function due to the high sidelobe of CSAR is then deduced, and compared with that of the conventional SAR. It is shown that the high sidelobe of CSAR focusing signal will severely affect the baseline decorre- lation and coregistration decorrelation. Simulation results confirm the theoretical analysis and quantitatively show the baseline and coregistration decorrelation degradation due to the high sidelobes of CSAR.展开更多
Knowledge of the locations of seismic sources is critical for microseismic monitoring. Time-window-based elastic wave interferometric imaging and weighted- elastic-wave （WEW） interferometric imaging are proposed and...Knowledge of the locations of seismic sources is critical for microseismic monitoring. Time-window-based elastic wave interferometric imaging and weighted- elastic-wave （WEW） interferometric imaging are proposed and used to locate modeled microseismic sources. The proposed method improves the precision and eliminates artifacts in location profiles. Numerical experiments based on a horizontally layered isotropic medium have shown that the method offers the following advantages： It can deal with Iow-SNR microseismic data with velocity perturbations as well as relatively sparse receivers and still maintain relatively high precision despite the errors in the velocity model. Furthermore, it is more efficient than conventional traveltime inversion methods because interferometric imaging does not require traveltime picking. Numerical results using a 2D fault model have also suggested that the weighted-elastic-wave interferometric imaging can locate multiple sources with higher location precision than the time-reverse imaging method.展开更多
The stability of submarine geological structures has a crucial influence on the construction of offshore engineering projects and the exploitation of seabed resources. Marine geologists should possess a detailed under...The stability of submarine geological structures has a crucial influence on the construction of offshore engineering projects and the exploitation of seabed resources. Marine geologists should possess a detailed understanding of common submarine geological hazards. Current marine seismic exploration methods are based on the most effective detection technologies. Therefore, current research focuses on improving the resolution and precision of shallow stratum structure detection methods. In this article, the feasibility of shallow seismic structure imaging is assessed by building a complex model, and differences between the seismic interferometry imaging method and the traditional imaging method are discussed. The imaging effect of the model is better for shallow layers than for deep layers because coherent noise produced by this method can result in an unsatisfactory imaging effect for deep layers. The seismic interference method has certain advantages for geological structural imaging of shallow submarine strata, which indicates continuous horizontal events, a high resolution, a clear fault, and an obvious structure boundary. The effects of the actual data applied to the Shenhu area can fully illustrate the advantages of the method. Thus, this method has the potential to provide new insights for shallow submarine strata imaging in the area.展开更多
Stimulated Brillouin scattering-induced phase noise is harmful to interferometric fiber sensing systems. The localized fluctuating model is used to study the intensity noise caused by the stimulated Brillouin scatteri...Stimulated Brillouin scattering-induced phase noise is harmful to interferometric fiber sensing systems. The localized fluctuating model is used to study the intensity noise caused by the stimulated Brillouin scattering in a single-mode fiber. The phase noise structure is analyzed for an interferometric fiber sensing system, and an unbalanced Michelson interferometer with an optical path difference of 1 m, as well as the phase-generated carrier technique, is used to measure the phase noise. It is found that the phase noise is small when the input power is below the stimulated Brillouin scattering threshold, increases dramatically at first and then gradually becomes flat when the input power is above the threshold, which is similar to the variation in relative intensity noise. It can be inferred that the increase in phase noise is mainly due to the broadening of the laser linewidth caused by stimulated Brillouin scattering, which is verified through linewidth measurements in the absence and presence of the stimulated Brillouin scattering.展开更多
For the modified demodulation arithmetic of 3×3 coupler, the processing software built on the basis of Labview is able to demodulate asymmetric 3×3 coupler signal and do further spectrum analysis. It shows t...For the modified demodulation arithmetic of 3×3 coupler, the processing software built on the basis of Labview is able to demodulate asymmetric 3×3 coupler signal and do further spectrum analysis. It shows that the measured frequency ranges from 10 Hz to 1 000 Hz and phase range is covered by -10 rad^10 rad. The phase sensitivity is 0.5 V/rad. This system is proved to show high resolution and wide dynamic range.展开更多
Interferometric phase filtering is one of the key steps in interferometricsynthetic aperture radar (InSAR/SAR). However, the ideal filtering results are difficult toobtain due to dense fringe and low coherence regions...Interferometric phase filtering is one of the key steps in interferometricsynthetic aperture radar (InSAR/SAR). However, the ideal filtering results are difficult toobtain due to dense fringe and low coherence regions. Moreover, the InSAR/SAR datarange is relatively large, so the efficiency of interferential phase filtering is one of themajor problems. In this letter, we proposed an interferometric phase filtering methodbased on an amended matrix pencil and linear window mean filter. The combination ofthe matrix pencil and the linear mean filter are introduced to the interferometric phasefiltering for the first time. First, the interferometric signal is analyzed, and theinterferometric phase filtering is transformed into a local frequency estimation problem.Then, the local frequency is estimated using an amended matrix pencil at a window. Thelocal frequency can represent terrain changes, thus suggesting that the frequency can beaccurately estimated even in dense fringe regions. Finally, the local frequency is filteredby using a linear window mean filter, and the filtered phase is recovered. The proposedmethod is calculated by some matrices. Therefore, the computational complexity isreduced, and the efficiency of the interferometric phase filtering is improved.Experiments are conducted with simulated and real InSAR data. The proposed methodexhibits a better filtering effect and an ideal efficiency as compared with the traditionalfiltering method.展开更多
A type of combined optical fiber interferometric acoustic emission sensor is proposed. The sensor can be independent on the laser source and make light interference by matching the lengths of two arms,so it can be use...A type of combined optical fiber interferometric acoustic emission sensor is proposed. The sensor can be independent on the laser source and make light interference by matching the lengths of two arms,so it can be used to monitor the health of large structure. Theoretical analyses indicate that the system can be equivalent to the Michelson interferometer with two optical fiber loop reflectors,and its sensitivity has been remarkably increased because of the decrease of the losses of light energy. PZT is powered by DC regulator to control the operating point of the system,so the system can accurately detect feeble vibration which is generated by ultrasonic waves propagating on the surface of solid. The amplitude and the frequency of feeble vibration signal are obtained by detecting the output light intensity of interferometer and using Fourier transform technique. The results indicate that the system can be used to detect the acoustic emission signals by the frequency characteristics.展开更多
In this paper, an algorithm of generating INSAR unwrapped phase image from SAR single-look complex images is presented. Besides the general processing technique, this article focuses on the methods of flat-earth phase...In this paper, an algorithm of generating INSAR unwrapped phase image from SAR single-look complex images is presented. Besides the general processing technique, this article focuses on the methods of flat-earth phase removal, phase noise reduction and phase unwrapping. The availability is tested by the results of processing ERS-1/2 SAR images.展开更多
Affected by the natural environmental and human activity factors,significant seasonal differences appear on the regional scattering characteristic and ground deformation of saline soil.Interferometric decorrelation du...Affected by the natural environmental and human activity factors,significant seasonal differences appear on the regional scattering characteristic and ground deformation of saline soil.Interferometric decorrelation due to season replacement limits the conventional multi-temporal interferometric synthetic aperture radar(MT-InSAR)technique and its application in such areas.To extend the monitoring capability in the salt desert area,we select a vast basin of saline soil around Howz-e-Soltan Salt Lake of Iran as the study area and present an improved MTInSAR for experimental research.Based on 131 C-band Sentinel-1 A images collected between October 2014 to July 2020,1896 refined interferograms in total are selected from all interferogram candidates.Interferometric coherence analysis shows that the coherence in the saline soil area has an apparent seasonal variation,and the soil moisture affected by the precipitation may be the main factor that leads to the seasonal variation.Subsequently,the deformation characteristics of saline soil under different environmental conditions and human activity factors are compared and analyzed in detail.Related deformation mechanisms of different saline soil types are initially revealed by combining interferometric coherence,meteorological data,and engineering geological characteristics of saline soil.Related results would provide reference for the large-scale infrastructure construction engineering in similar saline soil areas.展开更多
We present a comprehensive set of physical and geometrical parameters for each of the components of the close visual binary system HIP 11253(HD 14874).We present an analysis for the binary and multiple stellar systems...We present a comprehensive set of physical and geometrical parameters for each of the components of the close visual binary system HIP 11253(HD 14874).We present an analysis for the binary and multiple stellar systems with the aim to obtain a match between the overall observational spectral energy distribution of the system and the spectral synthesis created from model atmospheres using Al-Wardat's method for analyzing binary and multiple stellar systems.The epoch positions are used to determine the orbital parameters and the total mass.The parameters of both components are derived as:T_(eff)^(a)=6025,T_(eff)^(b)=4710,logg_(a)=4.55,logg_(b)=4.60,R_(a)=1.125 R_(⊙),R_(b)=0.88R_(⊙),L_(a)=1.849 L_(⊙),L_(b)=0.342 L_(⊙).Our analysis shows that the spectral types of the components are F9 and K3.By combining the orbital solution with the parallax measurements of Gaia DR2 and EDR3,we estimate the individual masses using the H-R diagram as M_(a)=1.09 M_(⊙)and M_(b)=0.59 M_(⊙)for using Gaia DR2 parallax and M_(a)=1.10 M_(⊙)and M_(b)=0.61 M_(⊙)for using Gaia EDR3 parallax.Finally,the location of both system's components on the stellar evolutionary tracks is presented.展开更多
Tests of preoperative visual function and prediction of postoperative E chart visual acuity(ECVA) using laser interferometric visual acuity(LIVA) and electroretinogram(ERG) were performed in 16 cases(19 eyes) of catar...Tests of preoperative visual function and prediction of postoperative E chart visual acuity(ECVA) using laser interferometric visual acuity(LIVA) and electroretinogram(ERG) were performed in 16 cases(19 eyes) of cataract. The results showed that the coincident rate between preoperative LIVA and postoperative ECVA was 63.2%, and there was a parallel correlation between preoperative amplitude of photopic ERG b-wave and postoperative ECVA in 79.0% of the eyes. Comparing these two methods, the test of LIVA ...展开更多
Conventional phase-shifting interferometry-based （PSI-based） cryptosystem needs at least two-step phase-shifting. In this work, we propose a phase-shifting-free interferometric cryptosystem, which needs only one int...Conventional phase-shifting interferometry-based （PSI-based） cryptosystem needs at least two-step phase-shifting. In this work, we propose a phase-shifting-free interferometric cryptosystem, which needs only one interferogram recording. Since the phase-shifting step is not required in the proposed cryptosystem, not only the low encryption speed which is a bottleneck problem of the conventional PSI-based one is solved, but also the setup of the cryptosystem is simplified. A series of simulation experimental results demonstrate the validity and robustness of the proposed cryptosystem.展开更多
In our previous studies, we demonstrated the usefulness of TanDEM-X interferometric bistatic mode with single polarization to obtain forest heights for the purposes of large area mapping. A key feature of our approach...In our previous studies, we demonstrated the usefulness of TanDEM-X interferometric bistatic mode with single polarization to obtain forest heights for the purposes of large area mapping. A key feature of our approach has been the use of a simplified Random Volume Over Ground(RVOG) model that locally estimates forest height. The model takes TanDEM-X interferometric coherence amplitude as an input and uses an external Digital Surface Model(DSM) to account for local slope variations due to terrain topography in order to achieve accurate forest height estimation. The selection of DSM for use as a local slope reference is essential, as an inaccurate DSM will result in less accurate terrain-correction and forest height estimation. In this paper, we assessed TanDEM-X height estimates associated with scale variations in different DSMs used in the model over a remote sensing supersite in Petawawa, Canada. The DSMs used for assessments and comparisons included ASTER GDEM, ALOS GDSM, airborne DRAPE DSM, Canadian DSM and TanDEM-X DSM. Airborne Laser Scanning(ALS) data were used as reference for terrain slope and forest height comparisons. The results showed that, with the exception of the ASTER GDEM, all DSMs were sufficiently accurate for the simplified RVOG model to provide a satisfactory estimate of stand-level forest height. When compared to the ALS 95th height percentile, the modeled forest heights had R2 values greater than 80% and Root-Mean-Square Errors(RMSE)less than 2 m. For a close similarity in slope estimation with the ALS reference, coverage across Canada and open data access, the 0.75 arc-second(20 m) resolution Canadian DSM was selected as a preferred choice for the simplified RVOG model to provide TanDEM-X height estimation in Canada.展开更多
To achieve better observation for sea surface,a new generation of wide-swath interferometric altimeter satellites is proposed.Before satellite launch,it is particularly important to study the data processing methods a...To achieve better observation for sea surface,a new generation of wide-swath interferometric altimeter satellites is proposed.Before satellite launch,it is particularly important to study the data processing methods and carry out the detailed error analysis of ocean satellites,because it is directly related to the ultimate ability of satellites to capture ocean information.For this purpose,ocean eddies are considered a specific case of ocean signals,and it can cause significant changes in sea surface elevation.It is suitable for theoretical simulation of the sea surface and systematic simulation of the altimeter.We analyzed the impacts of random error and baseline error on the sea surface and ocean signals and proposed a combined strategy of low-pass filtering,empirical orthogonal function(EOF)decomposition,and linear fitting to remove the errors.Through this strategy,sea surface anomalies caused by errors were considerably improved,and the capability of satellite for capturing ocean information was enhanced.Notably,we found that the baseline error in sea surface height data was likely to cause inaccuracy in eddy boundary detection,as well as false eddy detection.These abnormalities could be prevented for"clean"sea surface height after the errors removal.展开更多
基金funded by the National Natural Science Foundation of China Instrumentation Program(52327806)Youth Fund of the National Nature Foundation of China(62405020)China Postdoctoral Science Foundation(2024M764131).
文摘Large-aperture optical components are of paramount importance in domains such as integrated circuits,photolithography,aerospace,and inertial confinement fusion.However,measuring their surface profiles relies predominantly on the phase-shifting approach,which involves collecting multiple interferograms and imposes stringent demands on environmental stability.These issues significantly hinder its ability to achieve real-time and dynamic high-precision measurements.Therefore,this study proposes a high-precision large-aperture single-frame interferometric surface profile measurement(LA-SFISPM)method based on deep learning and explores its capability to realize dynamic measurements with high accuracy.The interferogram is matched to the phase by training the data measured using the small aperture.The consistency of the surface features of the small and large apertures is enhanced via contrast learning and feature-distribution alignment.Hence,high-precision phase reconstruction of large-aperture optical components can be achieved without using a phase shifter.The experimental results show that for the tested mirror withΦ=820 mm,the surface profile obtained from LA-SFISPM is subtracted point-by-point from the ground truth,resulting in a maximum single-point error of 4.56 nm.Meanwhile,the peak-to-valley(PV)value is 0.0758λ,and the simple repeatability of root mean square(SR-RMS)value is 0.00025λ,which aligns well with the measured results obtained by ZYGO.In particular,a significant reduction in the measurement time(reduced by a factor of 48)is achieved compared with that of the traditional phase-shifting method.Our proposed method provides an efficient,rapid,and accurate method for obtaining the surface profiles of optical components with different diameters without employing a phase-shifting approach,which is highly desired in large-aperture interferometric measurement systems.
基金supported by the Scientific Research Program Funded by Shaanxi Provincial Education Department (No.15JK1573)the Postgraduate Innovation and Practice Ability Development Fund of Xi’an Shiyou University (No.YCS21211084)。
文摘We proposed a fiber optic high temperature sensor based on the Mach-Zehnder interference(MZI)structure,which is composed of two lengths of multi-mode fibers(MMFs),a length of few-mode fiber(FMF)and two sections of single-mode fibers(SMFs).Firstly,the two sections of MMFs were spliced with two sections of SMFs.Then,the MMFs were fused to two ends of FMF to form a symmetrically structured fiber-optic MZI structure.In this structure,the MMF served as the optical mode field coupling element,and the cladding and core of the FMF are the interference arm and the reference arm of the MZI structure,respectively.We investigated the sensor's response characteristics of the temperature and strain.The experimental results indicate that the sensor is sensitive to temperature variation,and the temperature response sensitivity is up to 61.4 pm/℃ in the range of 40-250℃,while the sensor has weak strain sensitivity,its strain sensitivity is only-0.72 pm/μe in the strain range of 0-1400μe.Moreover,the sensor has good stability and repeatability.In brief,the proposed fiber optic high temperature sensor has good properties,such as high sensitivity,compact structure,good stability and repeatability,which can be used for monitoring the temperature of submerged oil electric pump units under oil wells.
文摘Sea topography information holds significant importance in oceanic research and the climate change detection.Radar imaging altimetry has emerged as the leading approach for global ocean observation,employing synthetic aperture radar(SAR)interferometry to enhance the spatial resolution of Sea topography.Nevertheless,current payload capacity and satellite hardware limitations prevent the extension of the interferometric baseline by enlarging the physical antenna size.This constraint hinders achieving centimeter-level accuracy in interferometric altimetry.To address this challenge,we conducted a numerical simulation to assess the viability of a large baseline interferometric imaging altimeter(LB-IIA).By controlling the baseline within the range of 600-1000 m through spiral orbit design in two satellites and mitigating baseline de-correlation with the carrier frequency shift(CFS)technique,we aimed to overcome the above limitations.Our findings demonstrate the efficacy of the CFS technique in compensating for baseline decoherence,elevating coherence from less than 0.1 to over 0.85.Concurrently.The height difference accuracy between neighboring sea surfaces reaches 1 cm within a 1 km resolution.This study is anticipated to serve as a foundational reference for future interferometric imaging altimeter development,catering to the demand for high-precision sea topography data in accurate global bathymetry inversion.
基金Project supported by the National Natural Science Foundations of China (Grant Nos. 11675119,12275136,and 12075001)the Nankai Zhide Foundations。
文摘Quantum interferometric power(IP), a discordlike measure, plays an important role in quantum metrology. We study the dynamics of IP for two-qubit X-shape states under different noisy environments. Our study shows that IP exhibits sudden change, and one side quantum channel is enough for the occurrence of a sudden change of IP. In particular, we show that the initial state having no sudden change of quantum discord exhibits a sudden change of IP under the dynamics of amplitude noise, but the converse is not true. Besides, we also investigate the dynamics of IP under two different kinds of composite noises. Our results also confirm that sudden change of IP occurs under such composite noises.
文摘Quantum correlations that surpass entanglement are of great importance in the realms of quantum information processing and quantum computation.Essentially,for quantum systems prepared in pure states,it is difficult to differentiate between quantum entanglement and quantum correlation.Nonetheless,this indistinguishability is no longer holds for mixed states.To contribute to a better understanding of this differentiation,we have explored a simple model for both generating and measuring these quantum correlations.Our study concerns two macroscopic mechanical resonators placed in separate Fabry–Pérot cavities,coupled through the photon hopping process.this system offers a comprehensively way to investigate and quantify quantum correlations beyond entanglement between these mechanical modes.The key ingredient in analyzing quantum correlation in this system is the global covariance matrix.It forms the basis for computing two essential metrics:the logarithmic negativity(E_(N)^(m))and the Gaussian interferometric power(P_(G)^(m)).These metrics provide the tools to measure the degree of quantum entanglement and quantum correlations,respectively.Our study reveals that the Gaussian interferometric power(P_(G)^(m))proves to be a more suitable metric for characterizing quantum correlations among the mechanical modes in an optomechanical quantum system,particularly in scenarios featuring resilient photon hopping.
基金supported by the National Natural Science Foundation of China(NSFC,grant Nos.42172323 and 12371454)。
文摘In source detection in the Tianlai project,locating the interferometric fringe in visibility data accurately will influence downstream tasks drastically,such as physical parameter estimation and weak source exploration.Considering that traditional locating methods are time-consuming and supervised methods require a great quantity of expensive labeled data,in this paper,we first investigate characteristics of interferometric fringes in the simulation and real scenario separately,and integrate an almost parameter-free unsupervised clustering method and seeding filling or eraser algorithm to propose a hierarchical plug and play method to improve location accuracy.Then,we apply our method to locate single and multiple sources’interferometric fringes in simulation data.Next,we apply our method to real data taken from the Tianlai radio telescope array.Finally,we compare with unsupervised methods that are state of the art.These results show that our method has robustness in different scenarios and can improve location measurement accuracy effectively.
基金supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)
文摘The coherence is a measure for the accuracy of the interferometric phase, and the synthetic aperture radar （SAR） inter- ferometric coherence is affected by several sources of the decor- relation noise. For the circular SAR （CSAR） imaging geometry, the system response function is in the form of the Bessel function which brings a high sidelobe, and the high sidelobe of CSAR will be an important factor influencing the interferometric coherence. The effect of the high sidelobe on the coherence is analyzed and deduced. Based on the interferometric characteristics of the slight difference in the viewing angles and the potential pixel off- set in the interferometric SAR （InSAR） images, a relation between the radar impulse response and the coherence loss function is derived. From the relational model, the coherence loss function due to the high sidelobe of CSAR is then deduced, and compared with that of the conventional SAR. It is shown that the high sidelobe of CSAR focusing signal will severely affect the baseline decorre- lation and coregistration decorrelation. Simulation results confirm the theoretical analysis and quantitatively show the baseline and coregistration decorrelation degradation due to the high sidelobes of CSAR.
基金supported by the R&D of Key Instruments and Technologies for Deep Resources Prospecting(No.ZDYZ2012-1)National Natural Science Foundation of China(No.11374322)
文摘Knowledge of the locations of seismic sources is critical for microseismic monitoring. Time-window-based elastic wave interferometric imaging and weighted- elastic-wave （WEW） interferometric imaging are proposed and used to locate modeled microseismic sources. The proposed method improves the precision and eliminates artifacts in location profiles. Numerical experiments based on a horizontally layered isotropic medium have shown that the method offers the following advantages： It can deal with Iow-SNR microseismic data with velocity perturbations as well as relatively sparse receivers and still maintain relatively high precision despite the errors in the velocity model. Furthermore, it is more efficient than conventional traveltime inversion methods because interferometric imaging does not require traveltime picking. Numerical results using a 2D fault model have also suggested that the weighted-elastic-wave interferometric imaging can locate multiple sources with higher location precision than the time-reverse imaging method.
基金supported by the National Natural Science Foundation of China (Nos. 41230318, 41176077, 4130 4096)the National High-tech R&D Program of China (863) (No. 2013AA092501)+2 种基金the PhD Program Foundation of the Ministry of Education of China (No. 201301 32120014)the Fundamental Research Funds for the Central Universities (Nos. 1313017, 1362013)Major National Science and Technology Programs (No. 2016ZX 05024-001-002)
文摘The stability of submarine geological structures has a crucial influence on the construction of offshore engineering projects and the exploitation of seabed resources. Marine geologists should possess a detailed understanding of common submarine geological hazards. Current marine seismic exploration methods are based on the most effective detection technologies. Therefore, current research focuses on improving the resolution and precision of shallow stratum structure detection methods. In this article, the feasibility of shallow seismic structure imaging is assessed by building a complex model, and differences between the seismic interferometry imaging method and the traditional imaging method are discussed. The imaging effect of the model is better for shallow layers than for deep layers because coherent noise produced by this method can result in an unsatisfactory imaging effect for deep layers. The seismic interference method has certain advantages for geological structural imaging of shallow submarine strata, which indicates continuous horizontal events, a high resolution, a clear fault, and an obvious structure boundary. The effects of the actual data applied to the Shenhu area can fully illustrate the advantages of the method. Thus, this method has the potential to provide new insights for shallow submarine strata imaging in the area.
基金Project supported by the National Natural Science Foundation of China (Grant No. 61177073)the Open Fund of Key Laboratory of Optoelectronic Information and Sensing Technologies of Guangdong Higher Education Institutes, Jinan University, China (Grant No. gdol201101)+1 种基金the Fund of Innovation of Graduate School of NUDT, China (Grant No. B110703)Hunan Provincial Innovation Foundation for Postgraduate,China (Grant No. CX2011B033)
文摘Stimulated Brillouin scattering-induced phase noise is harmful to interferometric fiber sensing systems. The localized fluctuating model is used to study the intensity noise caused by the stimulated Brillouin scattering in a single-mode fiber. The phase noise structure is analyzed for an interferometric fiber sensing system, and an unbalanced Michelson interferometer with an optical path difference of 1 m, as well as the phase-generated carrier technique, is used to measure the phase noise. It is found that the phase noise is small when the input power is below the stimulated Brillouin scattering threshold, increases dramatically at first and then gradually becomes flat when the input power is above the threshold, which is similar to the variation in relative intensity noise. It can be inferred that the increase in phase noise is mainly due to the broadening of the laser linewidth caused by stimulated Brillouin scattering, which is verified through linewidth measurements in the absence and presence of the stimulated Brillouin scattering.
文摘For the modified demodulation arithmetic of 3×3 coupler, the processing software built on the basis of Labview is able to demodulate asymmetric 3×3 coupler signal and do further spectrum analysis. It shows that the measured frequency ranges from 10 Hz to 1 000 Hz and phase range is covered by -10 rad^10 rad. The phase sensitivity is 0.5 V/rad. This system is proved to show high resolution and wide dynamic range.
基金The authors would like to thank the support by the State Key Program of National Natural Science Foundation of China under Grant[Number 41774026]the Satellite Mapping Technology and Application,National Administration of Surveying,Mapping and Geoinformation Key Laboratory under Grant[Number KLSMTA-201708].
文摘Interferometric phase filtering is one of the key steps in interferometricsynthetic aperture radar (InSAR/SAR). However, the ideal filtering results are difficult toobtain due to dense fringe and low coherence regions. Moreover, the InSAR/SAR datarange is relatively large, so the efficiency of interferential phase filtering is one of themajor problems. In this letter, we proposed an interferometric phase filtering methodbased on an amended matrix pencil and linear window mean filter. The combination ofthe matrix pencil and the linear mean filter are introduced to the interferometric phasefiltering for the first time. First, the interferometric signal is analyzed, and theinterferometric phase filtering is transformed into a local frequency estimation problem.Then, the local frequency is estimated using an amended matrix pencil at a window. Thelocal frequency can represent terrain changes, thus suggesting that the frequency can beaccurately estimated even in dense fringe regions. Finally, the local frequency is filteredby using a linear window mean filter, and the filtered phase is recovered. The proposedmethod is calculated by some matrices. Therefore, the computational complexity isreduced, and the efficiency of the interferometric phase filtering is improved.Experiments are conducted with simulated and real InSAR data. The proposed methodexhibits a better filtering effect and an ideal efficiency as compared with the traditionalfiltering method.
基金the Fundamental Research Foundation of Harbin Engineering University, (grant number HEUF 04017)
文摘A type of combined optical fiber interferometric acoustic emission sensor is proposed. The sensor can be independent on the laser source and make light interference by matching the lengths of two arms,so it can be used to monitor the health of large structure. Theoretical analyses indicate that the system can be equivalent to the Michelson interferometer with two optical fiber loop reflectors,and its sensitivity has been remarkably increased because of the decrease of the losses of light energy. PZT is powered by DC regulator to control the operating point of the system,so the system can accurately detect feeble vibration which is generated by ultrasonic waves propagating on the surface of solid. The amplitude and the frequency of feeble vibration signal are obtained by detecting the output light intensity of interferometer and using Fourier transform technique. The results indicate that the system can be used to detect the acoustic emission signals by the frequency characteristics.
文摘In this paper, an algorithm of generating INSAR unwrapped phase image from SAR single-look complex images is presented. Besides the general processing technique, this article focuses on the methods of flat-earth phase removal, phase noise reduction and phase unwrapping. The availability is tested by the results of processing ERS-1/2 SAR images.
基金supported by the National Natural Science Foundation of China(41771402,41804009)the National Key R&D Program of China(2017YFB0502700)Sichuan Science and Technology Program(2018JY0564,2019ZDZX0042,2020JDTD0003)。
文摘Affected by the natural environmental and human activity factors,significant seasonal differences appear on the regional scattering characteristic and ground deformation of saline soil.Interferometric decorrelation due to season replacement limits the conventional multi-temporal interferometric synthetic aperture radar(MT-InSAR)technique and its application in such areas.To extend the monitoring capability in the salt desert area,we select a vast basin of saline soil around Howz-e-Soltan Salt Lake of Iran as the study area and present an improved MTInSAR for experimental research.Based on 131 C-band Sentinel-1 A images collected between October 2014 to July 2020,1896 refined interferograms in total are selected from all interferogram candidates.Interferometric coherence analysis shows that the coherence in the saline soil area has an apparent seasonal variation,and the soil moisture affected by the precipitation may be the main factor that leads to the seasonal variation.Subsequently,the deformation characteristics of saline soil under different environmental conditions and human activity factors are compared and analyzed in detail.Related deformation mechanisms of different saline soil types are initially revealed by combining interferometric coherence,meteorological data,and engineering geological characteristics of saline soil.Related results would provide reference for the large-scale infrastructure construction engineering in similar saline soil areas.
文摘We present a comprehensive set of physical and geometrical parameters for each of the components of the close visual binary system HIP 11253(HD 14874).We present an analysis for the binary and multiple stellar systems with the aim to obtain a match between the overall observational spectral energy distribution of the system and the spectral synthesis created from model atmospheres using Al-Wardat's method for analyzing binary and multiple stellar systems.The epoch positions are used to determine the orbital parameters and the total mass.The parameters of both components are derived as:T_(eff)^(a)=6025,T_(eff)^(b)=4710,logg_(a)=4.55,logg_(b)=4.60,R_(a)=1.125 R_(⊙),R_(b)=0.88R_(⊙),L_(a)=1.849 L_(⊙),L_(b)=0.342 L_(⊙).Our analysis shows that the spectral types of the components are F9 and K3.By combining the orbital solution with the parallax measurements of Gaia DR2 and EDR3,we estimate the individual masses using the H-R diagram as M_(a)=1.09 M_(⊙)and M_(b)=0.59 M_(⊙)for using Gaia DR2 parallax and M_(a)=1.10 M_(⊙)and M_(b)=0.61 M_(⊙)for using Gaia EDR3 parallax.Finally,the location of both system's components on the stellar evolutionary tracks is presented.
文摘Tests of preoperative visual function and prediction of postoperative E chart visual acuity(ECVA) using laser interferometric visual acuity(LIVA) and electroretinogram(ERG) were performed in 16 cases(19 eyes) of cataract. The results showed that the coincident rate between preoperative LIVA and postoperative ECVA was 63.2%, and there was a parallel correlation between preoperative amplitude of photopic ERG b-wave and postoperative ECVA in 79.0% of the eyes. Comparing these two methods, the test of LIVA ...
基金Supported by the National Natural Science Foundation of China under Grant No 61575197the K.C.Wong Education Foundation+1 种基金the Fusion Foundation of Research and Education of Chinese Academy of Sciencesthe Youth Innovation Promotion Association of Chinese Academv of Sciences
文摘Conventional phase-shifting interferometry-based （PSI-based） cryptosystem needs at least two-step phase-shifting. In this work, we propose a phase-shifting-free interferometric cryptosystem, which needs only one interferogram recording. Since the phase-shifting step is not required in the proposed cryptosystem, not only the low encryption speed which is a bottleneck problem of the conventional PSI-based one is solved, but also the setup of the cryptosystem is simplified. A series of simulation experimental results demonstrate the validity and robustness of the proposed cryptosystem.
基金This work was supported by Natural Resources Canada and the Canadian Space Agency under Multisource Biomass GRIP and by the German Aerospace Centre for provision of TanDEM-X data。
文摘In our previous studies, we demonstrated the usefulness of TanDEM-X interferometric bistatic mode with single polarization to obtain forest heights for the purposes of large area mapping. A key feature of our approach has been the use of a simplified Random Volume Over Ground(RVOG) model that locally estimates forest height. The model takes TanDEM-X interferometric coherence amplitude as an input and uses an external Digital Surface Model(DSM) to account for local slope variations due to terrain topography in order to achieve accurate forest height estimation. The selection of DSM for use as a local slope reference is essential, as an inaccurate DSM will result in less accurate terrain-correction and forest height estimation. In this paper, we assessed TanDEM-X height estimates associated with scale variations in different DSMs used in the model over a remote sensing supersite in Petawawa, Canada. The DSMs used for assessments and comparisons included ASTER GDEM, ALOS GDSM, airborne DRAPE DSM, Canadian DSM and TanDEM-X DSM. Airborne Laser Scanning(ALS) data were used as reference for terrain slope and forest height comparisons. The results showed that, with the exception of the ASTER GDEM, all DSMs were sufficiently accurate for the simplified RVOG model to provide a satisfactory estimate of stand-level forest height. When compared to the ALS 95th height percentile, the modeled forest heights had R2 values greater than 80% and Root-Mean-Square Errors(RMSE)less than 2 m. For a close similarity in slope estimation with the ALS reference, coverage across Canada and open data access, the 0.75 arc-second(20 m) resolution Canadian DSM was selected as a preferred choice for the simplified RVOG model to provide TanDEM-X height estimation in Canada.
基金Supported by the National Key R&D Program of China(No.2016YFC1401008)the Key R&D Program of Shandong Province,China(No.2019GHY112055)+6 种基金the National Natural Science Foundation of China(Nos.U2006211,42090044,41606200,41776183,41906157)the Major Scientifi c and Technological Innovation Projects in Shandong Province(No.2019JZZY010102)the Strategic Priority Research Program of the Chinese Academy of Sciences(Nos.XDA19060101,XDB42000000)the Key Project of Center for Ocean Mega-Science,Chinese Academy of Sciences(No.COMS2019R02)the CAS(Chinese Academy of Sciences)100-Talent Program(No.Y9KY04101L)the Marine S&T Fund of Shandong Province for Pilot National Laboratory for Marine Science and Technology(Qingdao)(No.2018SDKJ0102-2)the Fundamental Research Funds for the Central Universities(Hohai University)(No.2018B41814)。
文摘To achieve better observation for sea surface,a new generation of wide-swath interferometric altimeter satellites is proposed.Before satellite launch,it is particularly important to study the data processing methods and carry out the detailed error analysis of ocean satellites,because it is directly related to the ultimate ability of satellites to capture ocean information.For this purpose,ocean eddies are considered a specific case of ocean signals,and it can cause significant changes in sea surface elevation.It is suitable for theoretical simulation of the sea surface and systematic simulation of the altimeter.We analyzed the impacts of random error and baseline error on the sea surface and ocean signals and proposed a combined strategy of low-pass filtering,empirical orthogonal function(EOF)decomposition,and linear fitting to remove the errors.Through this strategy,sea surface anomalies caused by errors were considerably improved,and the capability of satellite for capturing ocean information was enhanced.Notably,we found that the baseline error in sea surface height data was likely to cause inaccuracy in eddy boundary detection,as well as false eddy detection.These abnormalities could be prevented for"clean"sea surface height after the errors removal.
