Presented in this paper is the development of the driver for the data acquisition card with a peripheral component interconnection （PCI） local bus on the ion cyclotron range of frequency heating （1CRH） system. The...Presented in this paper is the development of the driver for the data acquisition card with a peripheral component interconnection （PCI） local bus on the ion cyclotron range of frequency heating （1CRH） system. The driver is mainly aimed at the embedded VxWorks system （real-time operating system） which is widely used in various fields of real-time systems. An efficient way is employed to develop this driver, which will advance the real-time control of the ICRH system on the experimental advanced superconductor tokamak （EAST）. The driver is designed using the TORNADO integrated development environment （IDE）, and implemented in C plus language. The details include the hardware configuration, analogue/digital （A/D） and digital/analogue （D/A） conversion, input and output （I/O） operation of the driver to support over five cards. The data acquisition card can be manipulated in a low-level program and meet the requirements of A/D conversion and D/A outputs.展开更多
Ion cyclotron wave resonance heating(ICRH) is one of the most important auxiliary methods to heat plasma in the Experimental Advanced Superconducting Tokamak(EAST). Several megawatts of power is transmitted through se...Ion cyclotron wave resonance heating(ICRH) is one of the most important auxiliary methods to heat plasma in the Experimental Advanced Superconducting Tokamak(EAST). Several megawatts of power is transmitted through separate coaxial lines and coupled with the plasma through arrays of loop antennas. The parameters of the ICRH system, including the injected power and phasing between antenna straps, are critical to the coupling efficiency of the power as well as the resulting impact on the heating efficiency. In this paper, we present a system for feedback control of the phase between the current straps and the ICRH power on EAST. The feedback control system was tested using both a matched dummy load and a plasma load, and it successfully maintained stable operation in the 2016 EAST campaign. Good control of the injected power and wave phases was achieved during edgelocalized mode operation.展开更多
One of the primary concerns associated with ion cyclotron resonance heating(ICRH)is the enhanced impurity sputtering resulting from radio frequency(RF)sheath formation near plasma-facing components(PFCs),such as limit...One of the primary concerns associated with ion cyclotron resonance heating(ICRH)is the enhanced impurity sputtering resulting from radio frequency(RF)sheath formation near plasma-facing components(PFCs),such as limiters.Developing a sputtering model integrated with RF sheath simulations allows for a more comprehensive understanding of the kinetic behavior of incident ions and their interactions with the limiter surface.We accordingly develop an impurity sputtering model“PMSAD”,which computes the sputtering yield(amount of impurity)on the limiter surface based on incident ion characteristics and predicts the spatial distribution of impurities.The model provides a robust method for understanding and analyzing the impurity sputtering process from limiter surfaces,which is crucial for preventing ICRH surface erosion and reducing edge and core plasma contamination.展开更多
Ion cyclotron wave resonance heating system(ICRH)which is one of the most important auxiliary system in EAST provides conditions for heating the plasma.In order to make the whole transmission network of ICRH form the ...Ion cyclotron wave resonance heating system(ICRH)which is one of the most important auxiliary system in EAST provides conditions for heating the plasma.In order to make the whole transmission network of ICRH form the required state,the coaxial switching system was developed,which mainly consists of 11 same coaxial switches.Each coaxial switch has a controller with an RS485 communication interface and is able to switch between two states.All controllers are integrated to an RS485 hub which connects to the computer.A master computer software is developed to control the coaxial switching system so as to achieve the state needs of ICRH.Moreover,several rounds of experiments show that the coaxial switching system operates reliably.The coaxial switching system has already been applied to normal use currently.展开更多
In microwave circuit and aerial system, impedance matching is very important. Liquid stub tuner is a new type of impedance matching device. In the HT-7 Tokamak Ion Cyclotron Resonance Heating ( ICRH ) system, we have ...In microwave circuit and aerial system, impedance matching is very important. Liquid stub tuner is a new type of impedance matching device. In the HT-7 Tokamak Ion Cyclotron Resonance Heating ( ICRH ) system, we have already adopted liquid stub tuner to replace the conventional stub tuner. It is urgent to develop a control system of the liquid stub tuner. This paper mainly introduces the design and realization of the liquid stub tuner control system , and briefly introduces its three controlling functions: local control, remote control and computer control.展开更多
Power deposition profiles generated by Ion Cyclotron Resonance Heating （ICRH） in non-circular tokamaks are studied using a ray-tracing technique. The simulation results for the Experimental Advanced Superconductor T...Power deposition profiles generated by Ion Cyclotron Resonance Heating （ICRH） in non-circular tokamaks are studied using a ray-tracing technique. The simulation results for the Experimental Advanced Superconductor Tokamak （EAST） D-shaped plasma are presented. It is indicated that the spatial distributions of plasma parameters （plasma density, species temperature, minority ion concentration, etc.） have an significant influence on the power deposition profiles. The findings may be highly useful to the planned plasma heating and experiments in EAST.展开更多
1.5MW Ion Cyclotron Wave Heating system was developed, the transmitter and the antenna both have their ground loops, which will severely perturb the system’s normal operation. To avoid perturbation, a DC break was de...1.5MW Ion Cyclotron Wave Heating system was developed, the transmitter and the antenna both have their ground loops, which will severely perturb the system’s normal operation. To avoid perturbation, a DC break was designed. The S parameter and the VSWR (voltage standing wave ratio) of incident port were calculated; the thermal effect caused by conductor loss and dielectric loss was analyzed.展开更多
The equilibrium reconstruction is important to study the tokamak plasma physical processes.To analyze the contribution of fast ions to the equilibrium,the kinetic equilibria at two time-slices in a typical H-mode disc...The equilibrium reconstruction is important to study the tokamak plasma physical processes.To analyze the contribution of fast ions to the equilibrium,the kinetic equilibria at two time-slices in a typical H-mode discharge with different auxiliary heatings are reconstructed by using magnetic diagnostics,kinetic diagnostics and TRANSP code.It is found that the fast-ion pressure might be up to one-third of the plasma pressure and the contribution is mainly in the core plasma due to the neutral beam injection power is primarily deposited in the core region.The fast-ion current contributes mainly in the core region while contributes little to the pedestal current.A steep pressure gradient in the pedestal is observed which gives rise to a strong edge current.It is proved that the fast ion effects cannot be ignored and should be considered in the future study of EAST.展开更多
The ion cyclotron resonance of frequency heating（ICRH） plays an important role in plasma heating.Two ICRH antennas were designed and applied on the EAST tokamak.In order to meet the requirement imposed by high-power...The ion cyclotron resonance of frequency heating（ICRH） plays an important role in plasma heating.Two ICRH antennas were designed and applied on the EAST tokamak.In order to meet the requirement imposed by high-power and long-pulse operation of EAST in the future,an active cooling system is mandatory to be designed to remove the heat load deposited on the components.Thermal analyses for high heat-load components have been carried out,which presented clear temperature distribution on each component and provided the reference data to do the optimization.Meanwhile,heat pipes were designed to satisfy the high requirement imposed by a Faraday shield and lateral limiter.展开更多
文摘Presented in this paper is the development of the driver for the data acquisition card with a peripheral component interconnection （PCI） local bus on the ion cyclotron range of frequency heating （1CRH） system. The driver is mainly aimed at the embedded VxWorks system （real-time operating system） which is widely used in various fields of real-time systems. An efficient way is employed to develop this driver, which will advance the real-time control of the ICRH system on the experimental advanced superconductor tokamak （EAST）. The driver is designed using the TORNADO integrated development environment （IDE）, and implemented in C plus language. The details include the hardware configuration, analogue/digital （A/D） and digital/analogue （D/A） conversion, input and output （I/O） operation of the driver to support over five cards. The data acquisition card can be manipulated in a low-level program and meet the requirements of A/D conversion and D/A outputs.
基金supported in part by the National Magnetic Confinement Fusion Science Program(No.2015GB101001)the National Natural Science Foundation of China(Nos.11375236 and11375235)
文摘Ion cyclotron wave resonance heating(ICRH) is one of the most important auxiliary methods to heat plasma in the Experimental Advanced Superconducting Tokamak(EAST). Several megawatts of power is transmitted through separate coaxial lines and coupled with the plasma through arrays of loop antennas. The parameters of the ICRH system, including the injected power and phasing between antenna straps, are critical to the coupling efficiency of the power as well as the resulting impact on the heating efficiency. In this paper, we present a system for feedback control of the phase between the current straps and the ICRH power on EAST. The feedback control system was tested using both a matched dummy load and a plasma load, and it successfully maintained stable operation in the 2016 EAST campaign. Good control of the injected power and wave phases was achieved during edgelocalized mode operation.
基金financially supported by the National MCF Energy R&D Program(Grant No.2022YFE03190100)the National Natural Science Foundation of China(Grant Nos.12422513,12105035,U21A20438)the Xiaomi Young Talents Program。
文摘One of the primary concerns associated with ion cyclotron resonance heating(ICRH)is the enhanced impurity sputtering resulting from radio frequency(RF)sheath formation near plasma-facing components(PFCs),such as limiters.Developing a sputtering model integrated with RF sheath simulations allows for a more comprehensive understanding of the kinetic behavior of incident ions and their interactions with the limiter surface.We accordingly develop an impurity sputtering model“PMSAD”,which computes the sputtering yield(amount of impurity)on the limiter surface based on incident ion characteristics and predicts the spatial distribution of impurities.The model provides a robust method for understanding and analyzing the impurity sputtering process from limiter surfaces,which is crucial for preventing ICRH surface erosion and reducing edge and core plasma contamination.
基金supported by National Natural Science Foundation of China(Nos.11575237,11775258)National Key Research and Development Program(Nos.2016YFA0400600 and 2016YFA0400601)China Fusion Engineering Experimental Reactor General Integration and Engineering Design(No.2017YFE0300503).
文摘Ion cyclotron wave resonance heating system(ICRH)which is one of the most important auxiliary system in EAST provides conditions for heating the plasma.In order to make the whole transmission network of ICRH form the required state,the coaxial switching system was developed,which mainly consists of 11 same coaxial switches.Each coaxial switch has a controller with an RS485 communication interface and is able to switch between two states.All controllers are integrated to an RS485 hub which connects to the computer.A master computer software is developed to control the coaxial switching system so as to achieve the state needs of ICRH.Moreover,several rounds of experiments show that the coaxial switching system operates reliably.The coaxial switching system has already been applied to normal use currently.
文摘In microwave circuit and aerial system, impedance matching is very important. Liquid stub tuner is a new type of impedance matching device. In the HT-7 Tokamak Ion Cyclotron Resonance Heating ( ICRH ) system, we have already adopted liquid stub tuner to replace the conventional stub tuner. It is urgent to develop a control system of the liquid stub tuner. This paper mainly introduces the design and realization of the liquid stub tuner control system , and briefly introduces its three controlling functions: local control, remote control and computer control.
文摘Power deposition profiles generated by Ion Cyclotron Resonance Heating （ICRH） in non-circular tokamaks are studied using a ray-tracing technique. The simulation results for the Experimental Advanced Superconductor Tokamak （EAST） D-shaped plasma are presented. It is indicated that the spatial distributions of plasma parameters （plasma density, species temperature, minority ion concentration, etc.） have an significant influence on the power deposition profiles. The findings may be highly useful to the planned plasma heating and experiments in EAST.
基金The project supported by the National Science Foundation of China (No. 10274089) National High Technology Program of China
文摘1.5MW Ion Cyclotron Wave Heating system was developed, the transmitter and the antenna both have their ground loops, which will severely perturb the system’s normal operation. To avoid perturbation, a DC break was designed. The S parameter and the VSWR (voltage standing wave ratio) of incident port were calculated; the thermal effect caused by conductor loss and dielectric loss was analyzed.
基金supported by National Key R&D Program of China under Grant No.2017YFE0300400National Natural Science Foundation of China under Grant Nos.11475220,11405218,11575248+1 种基金the National Magnetic Confinement Fusion Science Program of China under Contracts No.2014GB106001sponsored in part by Youth Innovation Promotion Association Chinese Academy of Sciences (Grant No.2016384)
文摘The equilibrium reconstruction is important to study the tokamak plasma physical processes.To analyze the contribution of fast ions to the equilibrium,the kinetic equilibria at two time-slices in a typical H-mode discharge with different auxiliary heatings are reconstructed by using magnetic diagnostics,kinetic diagnostics and TRANSP code.It is found that the fast-ion pressure might be up to one-third of the plasma pressure and the contribution is mainly in the core plasma due to the neutral beam injection power is primarily deposited in the core region.The fast-ion current contributes mainly in the core region while contributes little to the pedestal current.A steep pressure gradient in the pedestal is observed which gives rise to a strong edge current.It is proved that the fast ion effects cannot be ignored and should be considered in the future study of EAST.
基金supported by National Natural Science Foundation of China(Grant No.11375233)
文摘The ion cyclotron resonance of frequency heating（ICRH） plays an important role in plasma heating.Two ICRH antennas were designed and applied on the EAST tokamak.In order to meet the requirement imposed by high-power and long-pulse operation of EAST in the future,an active cooling system is mandatory to be designed to remove the heat load deposited on the components.Thermal analyses for high heat-load components have been carried out,which presented clear temperature distribution on each component and provided the reference data to do the optimization.Meanwhile,heat pipes were designed to satisfy the high requirement imposed by a Faraday shield and lateral limiter.
