This paper aims to experimentally and numerically probe fatigue behaviours and lifetimes of 3D4D(three-dimensional four-directional)braided composite I-beam under four-point flexure spectrum loading.New fatigue damage...This paper aims to experimentally and numerically probe fatigue behaviours and lifetimes of 3D4D(three-dimensional four-directional)braided composite I-beam under four-point flexure spectrum loading.New fatigue damage models of fibre yarn,matrix and fibre–matrix interface are proposed,and fatigue failure criteria and PFDA(Progressive Fatigue Damage Algorithm)are thus presented for meso-scale fatigue damage modelling of 3D4D braided composite I-beam.To validate the aforementioned model and algorithm,fatigue tests are conducted on the 3D4D braided composite I-beam under four-point flexure spectrum loading,and fatigue failure mechanisms are analyzed and discussed.Novel global–local FE(Finite Element)model based on the PFDA is generated for modelling progressive fatigue failure process and predicting fatigue life of 3D4D braided composite I-beam under four-point flexure spectrum loading.Good agreement has been achieved between experimental results and predictions,demonstrating the effective usage of new model.It is shown that matrix cracking and interfacial debonding initially initiates on top surface of top flange of I-beam,and then gradually propagates from the side surface of top flange to the intermediate web along the braiding angle,and considerable fiber breakage finally causes final fatigue failure of I-beam.展开更多
Local flexibility of crack plays an important role in crack identification of structures.Analytical methods on local flexibility in a cracked beam with simple geometric crossing sections,such as rectangle,circle,have ...Local flexibility of crack plays an important role in crack identification of structures.Analytical methods on local flexibility in a cracked beam with simple geometric crossing sections,such as rectangle,circle,have been made,but there are some difficulties in calculating local flexibility in a cracked beam with complex crossing section,such as pipe and I-beam.In this paper,an analytical method to calculate the local flexibility and rotational spring stiffness due to crack in I-beam is proposed.The local flexibility with respect to various crack depths can be calculated by dividing a cracked I-beam into a series of thin rectangles.The forward and inverse problems in crack detection of I-beam are studied.The forward problem comprises the construction of crack model exclusively for crack section and the construction of a numerically I-beam model to gain crack detection database.The inverse problem consists of the measurement of modal parameters and the detection of crack parameters.Two experiments including measurement of rotational spring stiffness and prediction of cracks in I-beam are conducted.Experimental results based on the current methods indicate that relative error of crack location is less than 3%,while the error of crack depth identification is less than 6%.Crack identification of I-beam is expected to contribute to the development of automated crack detection techniques for railway lines and building skeletons.展开更多
In order to enhance the bearing capacity of structural components,save materials,and reduce cost,a glued laminated timber(glulam)I-beam that is theoretically suitable for engineering application was proposed.In this s...In order to enhance the bearing capacity of structural components,save materials,and reduce cost,a glued laminated timber(glulam)I-beam that is theoretically suitable for engineering application was proposed.In this study,18 glulam specimens were fabricated using larch dimension lumber and resorcinol-formaldehyde resin.Four-point bending tests were carried out to compare the ultimate bearing capacity,strain,and deflection of various specimens.The results showed that:(1)The typical failure mode at bending is the web shear failure parallel to grain.Before the failure,cracks and sounds appear at the beam web,which represent the sudden brittle failure.(2)The cross-sectional strain of glulam beam changed linearly with the beam height,indicating that the plane section assumption was basically established.(3)Stiffener could improve the initial flexural stiffness of glulam beam,which experiences an increase of 28.21%.Larger the shear span ratio,smaller the initial flexural stiffness.The initial flexural stiffness improves by 10-23.5%with the increase in the thickness of the lower flange.(4)The effects of stiffener and shear-span ratio on shear strength are relatively significant.After the stiffeners are set at the support and the loading point in pairs,the shear strength of the glulam beam increases by 15.05%averagely.With the increase in the shear-span ratio,the shearing strength of the glulam I-beam gradually reduces.The equation of the shearing strength with the shear span ratio is obtained,which is shown by high fitting precision.(5)The shear strength correlation,as proposed by Soltis and Rammer,is suitable not only for rectangular beams,but also for glulam I-beams.展开更多
Based on full scale model of 1-beam and end-plate welding assembly with medium plate, welding temperature field and residual stress were simulated, infrared thermometers were employed to measure the real-time temperat...Based on full scale model of 1-beam and end-plate welding assembly with medium plate, welding temperature field and residual stress were simulated, infrared thermometers were employed to measure the real-time temperature Jbr verification purposes. Results show that the measured thermal cycle curves match well with the simulation result. Simulation results of welding residual stress indicate that the values of longitudinal and transverse stress on the upper surface of the plate are higher than the normal stress; higher tensile stresses exist at the end of the web weld toes and in the central area of the flange weld toes. The dangerous zones are located at the central areas of weld toes of the flange welds and near weld toes of the web welds.展开更多
This paper addresses the studies carried out on an I-beam to reveal the wave propagation characteristics and tackle the multi-mode propagation of Lamb waves. The experimental setup consisted of a new 3D Scanning Laser...This paper addresses the studies carried out on an I-beam to reveal the wave propagation characteristics and tackle the multi-mode propagation of Lamb waves. The experimental setup consisted of a new 3D Scanning Laser Doppler Vibrometer manufactured by Polytec (3D-SLDV) and was used to acquire high resolution time-space Lamb waves that were propagating in the I-beam. A high power and pulsed Nd:YAG laser was used to emit the required Lamb waves. The emission and sensing of the waves were carried out simultaneously. The wave propagation data was recorded by scanning the surface of the I-beam in a sequential manner. The measured data was used to construct the wave patterns that were propagating in the I-beams at different time instants. Furthermore, as the waves in an I-Beam propagate with multiple modes even at low frequency range, filtering was carried out in the frequency-wavenum- ber domain in order to decompose the modes. The results presented thereby confirm that the new 3D-SLDV possesses tremendous capability in revealing the wave propagation characteristics and its interaction with defect. The results could be the first time that the waves propagating in a real I-beam can be visually observed, whilst in the past, it can only be visualized through simulation. The capability of using such totally laser-based 3D inspection system to reveal the characteristics of Lamb wave and its interaction with defects are substantial.展开更多
Many engineering design problems are characterized by presence of several conflicting objectives. This requires efficient search of the feasible design region for optimal solutions which simultaneously satisfy multipl...Many engineering design problems are characterized by presence of several conflicting objectives. This requires efficient search of the feasible design region for optimal solutions which simultaneously satisfy multiple design objectives. Genetic algorithm optimization (GAO) is a powerful search technique with faster convergence rates than traditional evolutionary algorithms. This paper applies two GAO-based approaches to multi-objective engineering design and finds design variables through the feasible space. To demonstrate the utility of the proposed methods, the multi-objective design of an I-beam will be presented.展开更多
A comparative study of two pre-stressed girder bridges, one with AASHTO （American Association of State Highway and Transportation Officials） Type III girders and the other with new FIB （Florida l-beam） girders, is...A comparative study of two pre-stressed girder bridges, one with AASHTO （American Association of State Highway and Transportation Officials） Type III girders and the other with new FIB （Florida l-beam） girders, is presented. FIB girders are expected to provide increased lateral stiffness, higher load carrying capacity, cost-efficiency and better reliability. In this paper, the first bridge that is analyzed is a 3-span bridge designed with six AASHTO Type III girders, and the second bridge has four FIB girders with the same span length, width and girder depth. The bridges are analyzed for Florida state legal loads SU4 and C5. Both bridges are analyzed using a sophisticated finite element method. The deflections, moment envelopes, section capacity and live load rating of the two bridges are obtained and compared. FIB girders have higher vertical stiffness, higher section capacity providing higher load rating than the AASHTO girders.展开更多
The lateral torsional buckling phenomenon often governs design of steel I-beams. Although web opening is often used to accommodate the required mechanical and piping works in buildings, its effect on the buckling inst...The lateral torsional buckling phenomenon often governs design of steel I-beams. Although web opening is often used to accommodate the required mechanical and piping works in buildings, its effect on the buckling instability is not considered in the design codes. In this paper, the effect of web opening on both lateral torsional buckling and local buckling behaviors has been investigated. A simply supported steel I-beam has been studied under uniform bending moment around the major axis. Buckling analysis has been performed using the finite element method. Linear regression analysis has been conducted for output data to formulate an equation for the critical moment including web opening effect. The results have shown a limited reduction in the lateral torsional buckling capacity and a significant reduction in the local buckling capacity.展开更多
In the construction of cast-in-place bridge deck of prefabricated I-beam by pretension folding line method, I-beam is used as the main stress support, well-shaped support is used on the inner side, triangular stable s...In the construction of cast-in-place bridge deck of prefabricated I-beam by pretension folding line method, I-beam is used as the main stress support, well-shaped support is used on the inner side, triangular stable support is used on the outer side, temporary support and installation formwork are erected through walking operation platform, steel bar binding and cast-in-place concrete deck construction are carried out on the upper part of I-beam and formwork, the deck thickness is only 20cm, which meets the vehicle load requirements of city -A grade bridge BZZ-100 and reduces the dead weight of the structure. Compared with the common full framing, the framing used in the construction is convenient in construction, material-saving, simple in process and short in construction time. I-beam construction adopts factory processing and production. Formwork is uniformly made of shaped steel formwork. The prefabricated members have a beautiful appearance. Prestressing is installed and tensioned in advance to ensure the straightness of the prestressing and the accuracy of the position. The overall structure of the I-beam is light in weight, and the total amount of concrete used is small. Under the condition of reducing the dead weight of each span and ensuring the stress stability, the amount of concrete used is reduced, which is beneficial to environmental protection and material conservation. In terms of formwork support system, the support form of this process is easy to build, less material is used and the construction speed is fast. And the binding of the steel bars can be completed in a short time. In the concrete pouring project, the pouring speed is fast and the construction is simple.展开更多
基金supported by the National Natural Science Foundation of China(No.12472340).
文摘This paper aims to experimentally and numerically probe fatigue behaviours and lifetimes of 3D4D(three-dimensional four-directional)braided composite I-beam under four-point flexure spectrum loading.New fatigue damage models of fibre yarn,matrix and fibre–matrix interface are proposed,and fatigue failure criteria and PFDA(Progressive Fatigue Damage Algorithm)are thus presented for meso-scale fatigue damage modelling of 3D4D braided composite I-beam.To validate the aforementioned model and algorithm,fatigue tests are conducted on the 3D4D braided composite I-beam under four-point flexure spectrum loading,and fatigue failure mechanisms are analyzed and discussed.Novel global–local FE(Finite Element)model based on the PFDA is generated for modelling progressive fatigue failure process and predicting fatigue life of 3D4D braided composite I-beam under four-point flexure spectrum loading.Good agreement has been achieved between experimental results and predictions,demonstrating the effective usage of new model.It is shown that matrix cracking and interfacial debonding initially initiates on top surface of top flange of I-beam,and then gradually propagates from the side surface of top flange to the intermediate web along the braiding angle,and considerable fiber breakage finally causes final fatigue failure of I-beam.
基金supported by National Natural Science Foundation of China (Grant No. 50805114)National Basic Research Program of China (973 Program,Grant No. 2011CB706805)
文摘Local flexibility of crack plays an important role in crack identification of structures.Analytical methods on local flexibility in a cracked beam with simple geometric crossing sections,such as rectangle,circle,have been made,but there are some difficulties in calculating local flexibility in a cracked beam with complex crossing section,such as pipe and I-beam.In this paper,an analytical method to calculate the local flexibility and rotational spring stiffness due to crack in I-beam is proposed.The local flexibility with respect to various crack depths can be calculated by dividing a cracked I-beam into a series of thin rectangles.The forward and inverse problems in crack detection of I-beam are studied.The forward problem comprises the construction of crack model exclusively for crack section and the construction of a numerically I-beam model to gain crack detection database.The inverse problem consists of the measurement of modal parameters and the detection of crack parameters.Two experiments including measurement of rotational spring stiffness and prediction of cracks in I-beam are conducted.Experimental results based on the current methods indicate that relative error of crack location is less than 3%,while the error of crack depth identification is less than 6%.Crack identification of I-beam is expected to contribute to the development of automated crack detection techniques for railway lines and building skeletons.
基金supported by the Natural Science Foundation of Jiang-su Province(Grant No.BK20181402)the National Natural Science Foundation of China(Grant No.51878354)+2 种基金a Project Funded by the National First-class Disciplines(PNFD)a Project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)a Project Funded by the Co-Innovation Center of Efficient Processing and Utilization of Forest Resources,Nanjing Forestry University(Nanjing,210037,China).
文摘In order to enhance the bearing capacity of structural components,save materials,and reduce cost,a glued laminated timber(glulam)I-beam that is theoretically suitable for engineering application was proposed.In this study,18 glulam specimens were fabricated using larch dimension lumber and resorcinol-formaldehyde resin.Four-point bending tests were carried out to compare the ultimate bearing capacity,strain,and deflection of various specimens.The results showed that:(1)The typical failure mode at bending is the web shear failure parallel to grain.Before the failure,cracks and sounds appear at the beam web,which represent the sudden brittle failure.(2)The cross-sectional strain of glulam beam changed linearly with the beam height,indicating that the plane section assumption was basically established.(3)Stiffener could improve the initial flexural stiffness of glulam beam,which experiences an increase of 28.21%.Larger the shear span ratio,smaller the initial flexural stiffness.The initial flexural stiffness improves by 10-23.5%with the increase in the thickness of the lower flange.(4)The effects of stiffener and shear-span ratio on shear strength are relatively significant.After the stiffeners are set at the support and the loading point in pairs,the shear strength of the glulam beam increases by 15.05%averagely.With the increase in the shear-span ratio,the shearing strength of the glulam I-beam gradually reduces.The equation of the shearing strength with the shear span ratio is obtained,which is shown by high fitting precision.(5)The shear strength correlation,as proposed by Soltis and Rammer,is suitable not only for rectangular beams,but also for glulam I-beams.
基金This research was supported by the National Natural Science Foundation of China （51171093）.
文摘Based on full scale model of 1-beam and end-plate welding assembly with medium plate, welding temperature field and residual stress were simulated, infrared thermometers were employed to measure the real-time temperature Jbr verification purposes. Results show that the measured thermal cycle curves match well with the simulation result. Simulation results of welding residual stress indicate that the values of longitudinal and transverse stress on the upper surface of the plate are higher than the normal stress; higher tensile stresses exist at the end of the web weld toes and in the central area of the flange weld toes. The dangerous zones are located at the central areas of weld toes of the flange welds and near weld toes of the web welds.
文摘This paper addresses the studies carried out on an I-beam to reveal the wave propagation characteristics and tackle the multi-mode propagation of Lamb waves. The experimental setup consisted of a new 3D Scanning Laser Doppler Vibrometer manufactured by Polytec (3D-SLDV) and was used to acquire high resolution time-space Lamb waves that were propagating in the I-beam. A high power and pulsed Nd:YAG laser was used to emit the required Lamb waves. The emission and sensing of the waves were carried out simultaneously. The wave propagation data was recorded by scanning the surface of the I-beam in a sequential manner. The measured data was used to construct the wave patterns that were propagating in the I-beams at different time instants. Furthermore, as the waves in an I-Beam propagate with multiple modes even at low frequency range, filtering was carried out in the frequency-wavenum- ber domain in order to decompose the modes. The results presented thereby confirm that the new 3D-SLDV possesses tremendous capability in revealing the wave propagation characteristics and its interaction with defect. The results could be the first time that the waves propagating in a real I-beam can be visually observed, whilst in the past, it can only be visualized through simulation. The capability of using such totally laser-based 3D inspection system to reveal the characteristics of Lamb wave and its interaction with defects are substantial.
文摘Many engineering design problems are characterized by presence of several conflicting objectives. This requires efficient search of the feasible design region for optimal solutions which simultaneously satisfy multiple design objectives. Genetic algorithm optimization (GAO) is a powerful search technique with faster convergence rates than traditional evolutionary algorithms. This paper applies two GAO-based approaches to multi-objective engineering design and finds design variables through the feasible space. To demonstrate the utility of the proposed methods, the multi-objective design of an I-beam will be presented.
文摘A comparative study of two pre-stressed girder bridges, one with AASHTO （American Association of State Highway and Transportation Officials） Type III girders and the other with new FIB （Florida l-beam） girders, is presented. FIB girders are expected to provide increased lateral stiffness, higher load carrying capacity, cost-efficiency and better reliability. In this paper, the first bridge that is analyzed is a 3-span bridge designed with six AASHTO Type III girders, and the second bridge has four FIB girders with the same span length, width and girder depth. The bridges are analyzed for Florida state legal loads SU4 and C5. Both bridges are analyzed using a sophisticated finite element method. The deflections, moment envelopes, section capacity and live load rating of the two bridges are obtained and compared. FIB girders have higher vertical stiffness, higher section capacity providing higher load rating than the AASHTO girders.
文摘The lateral torsional buckling phenomenon often governs design of steel I-beams. Although web opening is often used to accommodate the required mechanical and piping works in buildings, its effect on the buckling instability is not considered in the design codes. In this paper, the effect of web opening on both lateral torsional buckling and local buckling behaviors has been investigated. A simply supported steel I-beam has been studied under uniform bending moment around the major axis. Buckling analysis has been performed using the finite element method. Linear regression analysis has been conducted for output data to formulate an equation for the critical moment including web opening effect. The results have shown a limited reduction in the lateral torsional buckling capacity and a significant reduction in the local buckling capacity.
文摘In the construction of cast-in-place bridge deck of prefabricated I-beam by pretension folding line method, I-beam is used as the main stress support, well-shaped support is used on the inner side, triangular stable support is used on the outer side, temporary support and installation formwork are erected through walking operation platform, steel bar binding and cast-in-place concrete deck construction are carried out on the upper part of I-beam and formwork, the deck thickness is only 20cm, which meets the vehicle load requirements of city -A grade bridge BZZ-100 and reduces the dead weight of the structure. Compared with the common full framing, the framing used in the construction is convenient in construction, material-saving, simple in process and short in construction time. I-beam construction adopts factory processing and production. Formwork is uniformly made of shaped steel formwork. The prefabricated members have a beautiful appearance. Prestressing is installed and tensioned in advance to ensure the straightness of the prestressing and the accuracy of the position. The overall structure of the I-beam is light in weight, and the total amount of concrete used is small. Under the condition of reducing the dead weight of each span and ensuring the stress stability, the amount of concrete used is reduced, which is beneficial to environmental protection and material conservation. In terms of formwork support system, the support form of this process is easy to build, less material is used and the construction speed is fast. And the binding of the steel bars can be completed in a short time. In the concrete pouring project, the pouring speed is fast and the construction is simple.
