Hydroxyapatite nanoparticles(HAP NPs)were synthesized by a one‐step hydrothermal method.The surface of HAP NPs was grafted-SH and-COOH chelating groups via in situ surface‐modification with iminodiacetic acid(IDA)an...Hydroxyapatite nanoparticles(HAP NPs)were synthesized by a one‐step hydrothermal method.The surface of HAP NPs was grafted-SH and-COOH chelating groups via in situ surface‐modification with iminodiacetic acid(IDA)and 3‐mercaptopropyl trimethoxysilane(MPS)to afford dual surface‐capped nano‐amendment HAPIDA/MPS.The structure of HAP‐IDA/MPS was characterized,and its adsorption performance for Hg^(2+),Cu^(2+),Zn^(2+),Ni^(2+),Co^(2+),and Cd^(2+)was evaluated.The total adsorption capacity of 0.10 g HAP‐IDA/MPS nano‐amendment for Hg^(2+),Cu^(2+),Zn^(2+),Ni^(2+),Co^(2+),and Cd^(2+)with an initial mass concentration of 20 mg·L^(-1) reached 13.7 mg·g^(-1),about 4.3 times as much as that of HAP.Notably,HAP‐IDA/MPS nano‐amendment displayed the highest immobilization rate for Hg^(2+),possibly because of its chemical reaction with-SH to form sulfide,possessing the lowest solubility product constant among a variety of metal sulfides.展开更多
Hydroxyapatite (HA) is widely explored as a biocompatible filler to enhance the mechanical and functional properties of glass ionomer cements (GICs). HA of particle sizes 15 µm and 30 µm were added as a fill...Hydroxyapatite (HA) is widely explored as a biocompatible filler to enhance the mechanical and functional properties of glass ionomer cements (GICs). HA of particle sizes 15 µm and 30 µm were added as a filler into a matrix, composed of calcium aluminosilicate GICs and Poly-acrylic acid (PAA) in varying ratios. The tested ratios were Glass:PAA = 2:1 and Glass:HA:PAA = 2:0.5:1 to improve the mechanical strength of a conventional GIC. Mechanical properties, including compressive, flexural, and diametral tensile strength were studied at different setting times. The compressive strength (CS) was improved with hydroxyapatite addition and prolonged setting time while diametral tensile strength (DTS) did not follow any specific trend. The flexural strength (FS) of the composite cement was increased with increasing setting time regardless of the particle size of hydroxyapatite. The FTIR spectra of hydroxyapatite of particle sizes 15 μm and 30 μm are similar but for HA-GIC composites, the FTIR spectra, the peak around 1460 cm−1 are due to C-H and the peak at 1553 cm−1 is due to calcium carboxylate with calcium in a bridging mode which would be an excellent material that chemically bonds to the tooth structure, making it effective for both restorative procedures and cavity fillings. Scanning electron microscopy (SEM) microstructural study revealed that the glass particles were wrenched out, which was a cohesive fracture. The X-ray diffraction (XRD) pattern showed that the hydroxyapatite has a crystalline single-phase, hexagonal structure. The sharp peaks between the 2-theta range of 30 - 40 degrees are the same as in enamel powder. The spectra indicate the pure set cement as amorphous since there is no prominent peak, but with the addition of hydroxyapatite filler, the peak in the 2-theta range of 20 - 35 degrees is ascribed to crystalline apatite structure. The results indicate that incorporating hydroxyapatite into GIC significantly enhances its mechanical properties and structural integrity, suggesting its potential as an improved material for dental and restorative applications.展开更多
Biodegradable magnesium(Mg)alloys have received increased attention as temporary medical implants due to their mechanical properties and density,similar to natural bone.However,the fast corrosion of Mg alloys in a phy...Biodegradable magnesium(Mg)alloys have received increased attention as temporary medical implants due to their mechanical properties and density,similar to natural bone.However,the fast corrosion of Mg alloys in a physiological condition limits their wide applications.Hence,hydroxyapatite(HAp)coatings on Mg alloys have attracted much attention to address this corrosion issue and enhance the surface functionalities.In this paper,we present a review of HAp coating strategies on Mg alloys,including the sol-gel method,hydrothermal treatment,biomimetic coating,electrochemical deposition,electrophoretic deposition,and plasma electrolytic oxidation technique,and their recent progress to enhance the surface characteristics of Mg alloys.This review focused on aspects of coating morphology,hybrid formulations,and how they influence corrosion behavior as well as in vitro and in vivo performance.Moreover,we have discussed the future prospects of HAp-coating strategies,emphasizing on multifunctional,hybrid,and smart coatings for next-generation implant materials.展开更多
The field of bone tissue engineering has experienced an increase in prevalence due to the inherent challenge of the natural regeneration of significant bone deformities.This investigation focused on the preparation of...The field of bone tissue engineering has experienced an increase in prevalence due to the inherent challenge of the natural regeneration of significant bone deformities.This investigation focused on the preparation of Three-Dimensional(3D)-printed Polycaprolactone(PCL)scaffolds with varying proportions of Nanohydroxyapatite(NHA)and Nanoclay(NC),and their physiochemical and biological properties were assessed.The mechanical properties of PCL are satisfactory;however,its hydrophobic nature and long-term degradation hinder its use in scaffold fabrication.NHA and NC have been employed to improve the hydrophilic characteristics,mechanical strength,adhesive properties,biocompatibility,biodegradability,and osteoconductive behavior of PCL.The morphology results demonstrated 3D-printed structures with interconnected rectangular macropores and proper nanoparticle distribution.The sample containing 70 wt%NC showed the highest porosity(65.98±2.54%),leading to an increased degradation rate.The compressive strength ranged from 10.65±1.90 to 84.93±9.93 MPa,which is directly proportional to the compressive strength of cancellous bone(2–12 MPa).The wettability,water uptake,and biodegradability of PCL scaffolds considerably improved as the amount of NC increased.The results of the cellular assays exhibited increased proliferation,viability,and adhesion of MG-63 cells due to the addition of NHA and NC to the scaffolds.Finally,according to the in vitro results,it can be concluded that 3D-printed samples with higher amounts of NC can be regarded as a suitable scaffold for expediting the regeneration process of bone defects.展开更多
The mesoporous hydroxyapatite （HA） was synthesized by hydrothermal method utilizing cationic surfactant cetyltrimethylammonium bromide （CTAB） as template. The crystalline phase, morphology and porous structure wer...The mesoporous hydroxyapatite （HA） was synthesized by hydrothermal method utilizing cationic surfactant cetyltrimethylammonium bromide （CTAB） as template. The crystalline phase, morphology and porous structure were characterized respectively by different detecting techniques. The results reveal that the particles are highly crystalline hydroxyapatite phase. The surfactant has little influence on the morphology of the crystals, but affects the porous structure obviously. The sample without CTAB has a low surface area not exceeding 33 m^2/g, and no distinct pores can be observed by TEM. While the samples obtained with the surfactant get better parameters. Numerous open-ended pores centered at 2-7 nm spread unequally on the surface of the hydroxyapatite nanorods. The N2 adsorption-desorption experiments show type IV isotherms with distinct hysteresis loops, illustrating the presence of mesoporous structure. When the mole ratio of CTAB to HA is 1：2, the sample has the largest surface area of 97.1 m^2/g and pore volume of 0.466 cm^3/g.展开更多
In order to further improve the transfection efficiency of hydroxyapatite nanoparticle （HAp）, arginine functionalized hydroxyapatite （HAp/Arg） was synthesized by hydrothermal synthesis. The morphology, crystallite...In order to further improve the transfection efficiency of hydroxyapatite nanoparticle （HAp）, arginine functionalized hydroxyapatite （HAp/Arg） was synthesized by hydrothermal synthesis. The morphology, crystallite size and zeta potential of the HAp/Arg were characterized by transmission electron microscopy （TEM）, atomic force microscopy （AFM） and zeta potential analyzer. The loading and protecting properties of HAp/Arg to DNA were tested by electrophoresis. Its cytotoxicity was also measured in Hela cells and HAEC cells by MTT and LDH, and its transfection efficiency was examined by fluorescence microscope and flow cytometry. The results reveal that HAp/Arg is short rod-like and nano single crystal, the mean diameter is 50-90 nm and zeta potential is 35.8 mV at pH 7.4. HAp/Arg to DNA can be condensed by electrostatic effect and protect DNA against degradation in DNase I, and shows high transfection efficiency without cytotoxicity. These results suggest that HAp/Arg can be a promising alternative as a novel gene delivery system.展开更多
The mixture of CaHPO 4·2H 2O and CaCO 3 was ground in an aqueous system under appropriate conditions to investigate the mechanochemical reaction for the synthesis of crystalline hydroxyapatite (HA) powder. Hyd...The mixture of CaHPO 4·2H 2O and CaCO 3 was ground in an aqueous system under appropriate conditions to investigate the mechanochemical reaction for the synthesis of crystalline hydroxyapatite (HA) powder. Hydroxyapatite of high crystallinity powder including trace Ca 10 (PO 4) 6CO 3(OH) and Ca 9HPO 4(PO 4) 6OH can be synthesized by mechanical activation without further thermal treatment at a high temperature. The synthesis reaction during the grinding process was almost completed within 1h. The as-ground powder exhibits a particle distribution of 20-100nm in size with a spherical or rodlike morphology. The composition and degree of crystallinity of the mechanochemical synthesized hydroxyapatite powders were coincident with the cement-type hydroxyapatite.展开更多
The arginine-modified and europium-doped hydroxyapatite nanoparticles（HAP-Eu） were synthesized by hydrothermal synthesis.The prepared nanoparticles were characterized by transmission electron microscopy（TEM）,X-ray...The arginine-modified and europium-doped hydroxyapatite nanoparticles（HAP-Eu） were synthesized by hydrothermal synthesis.The prepared nanoparticles were characterized by transmission electron microscopy（TEM）,X-ray diffractometry（XRD）,Fourier transform infrared（FTIR） and zeta potential analyzer.The cell viability of HAP-Eu was tested by image flow cytometry.The results indicated that HAP-Eu is short column shapes and its size is approximately 100 nm,its zeta potential is about 30.10 mV at pH of 7.5,and shows no cytotoxicity in human epithelial cells and endothelial cells.展开更多
Objective:To investigate possible effects of nanophase powder of hydroxyapatite on proliferation of periodontal ligament cells. Methods: With sol-gel method, the nanophase hydroxyapatite powders were fabricated. These...Objective:To investigate possible effects of nanophase powder of hydroxyapatite on proliferation of periodontal ligament cells. Methods: With sol-gel method, the nanophase hydroxyapatite powders were fabricated. These powders were proved nanopaticles by transmission electron microscope. The effects on proliferation of periodontal ligament cell(PDLC) were observed in vitro with MTT [3-(4,5dimethylthiazo;-2-yl)-2,5-diphenytetralium bromide] method. Results: On the 2nd,3rd,4th day after treated with nanoparticles of hydroxyapatite, the proliferate activity of the PDLC increases significantly, compared with those with dense hydroxyaoatite and control but no significant difference could be found between the dense hydroxyapatite and the control. Conclusion: Nanophase hydroxyapatite can promote the regeneration of periodontal tissue.展开更多
The purpose of this study was to analyze the effect of strontium-substituted hydroxyapatite (Sr-HA) on bone osseointegration of the implants using fluorescence microscopy. We allocated 20 implants to two groups: Sr-HA...The purpose of this study was to analyze the effect of strontium-substituted hydroxyapatite (Sr-HA) on bone osseointegration of the implants using fluorescence microscopy. We allocated 20 implants to two groups: Sr-HA group and HA group. Electrochemically deposited HA and Sr-HA coatings were applied onto the implants separately. All the implants were inserted into femur bone of rabbits. Oxytetracycline hydrochloride, alizarin-complexon, and calcein green were respectively administered 7, 28, and 46 d after the implantation. After eight weeks, femurs were retrieved and prepared for the fluorescence microscopy observation. We analyzed the bone mineral apposition rates (MARs), bone area ratios (BARs), and bone to implant contact (BIC) of the two groups. Fluorescence microscopic observation showed that all groups exhibited extensive early peri-implant bone formation. The MAR of the Sr-HA group was greater than that for pure HA from 7 to 28 d after implantation, but no significant difference was found at later stage. And the BIC showed difference at 7 and 28 d compared with pure HA. We concluded that Sr-HA coating can improve the bone osseointegration of the implant in the early stage compared with the HA coating.展开更多
Fluorine-doped hydroxyapatite(FHA) and calcium deficient hydroxyapatite(CDHA) were coated on the surface biodegradable magnesium alloy using electrochemical deposition(ED) technique. Coating characterization was inves...Fluorine-doped hydroxyapatite(FHA) and calcium deficient hydroxyapatite(CDHA) were coated on the surface biodegradable magnesium alloy using electrochemical deposition(ED) technique. Coating characterization was investigated X-ray diffraction(XRD), Fourier-transformed infrared spectroscopy(FTIR), transmission electron microscopy(TEM), scanni electron microscopy(SEM) and energy dispersive X-ray spectroscopy(EDS). The result shows that nano-FHA coated samp presents nano needle-like structure, which is oriented perpendicular to the surface of the substrate with denser and more unifo layers compared to the nano-CDHA coated sample. The nano-FHA coating shows smaller crystallite size(65 nm) compared to t nano-CDHA coating(95 nm); however, CDHA presents thicker layer(19 μm in thickness) compared to the nano-FHA(15 μm thickness). The corrosion behaviour determined by polarization, immersion and hydrogen evolution tests indicates that the nano-FH and nano-CDHA coatings significantly decrease corrosion rate and induce passivation. The nano-FHA and nano-CDHA coatings c accelerate the formation of bone-like apatite layer and significantly decrease the dissolution rate as compared to the uncoated M alloy. The nano-FHA coating provides effective protection to Mg alloy and presents the highest corrosion resistance. Therefore, t nano-FHA coating on Mg alloy is suggested as a great candidate for orthopaedic applications.展开更多
In this paper, the behaviors of aqueous zinc sorption by hydroxyapatite in the co-existence of Pb^2＋, Cd^2＋ and Cu^2＋ are investigated, the effects of Pb^2＋, Cd^2＋ and Cu^2＋ on the sorption of Zn^2＋ are discuss...In this paper, the behaviors of aqueous zinc sorption by hydroxyapatite in the co-existence of Pb^2＋, Cd^2＋ and Cu^2＋ are investigated, the effects of Pb^2＋, Cd^2＋ and Cu^2＋ on the sorption of Zn^2＋ are discussed, and the hydroxyapatite sorption capabilities for Pb^2＋, Cd^2＋, Cu^2＋ and Zn^2＋ are compared. The experimental results show that the Zn^2＋ removal efficiency decreases gradually with the increase of the Cd^2＋ concentration of the solution, and there is no sorption preference between Cd^2＋ and Zn^2＋. On the other hand, the Zn^2＋ removal efficiency rapidly decreases rapidly with the increase of the Cu^2＋ concentration of the solution, and there is a clear sorption preference between Cu^2＋ and Zn^2＋. It is noticed that the Zn^2＋ removal efficiency is hardly changed with the variance of Pb^2＋ concentration because the removal mechanisms for these two ions are totally different. It is concluded that the adsorption affinities of the heavy metals for the hydroxyapatite follows this sequence： pb^2＋〉 Cu^2＋〉 Cd^2＋〉 Zn^2＋.展开更多
Objective: To prepare hydroxyapatite cement (or calcium phosphate cement, CPC) and analyze its capability. Methods: Tetracalcium phosphate (TTCP) was prepared by the method of high heat. TTCP reacted with in simulated...Objective: To prepare hydroxyapatite cement (or calcium phosphate cement, CPC) and analyze its capability. Methods: Tetracalcium phosphate (TTCP) was prepared by the method of high heat. TTCP reacted with in simulated body situation and produced CPC, Its capability was analyzed by scanning electron microscopy (SEM) , X-ray diffraction(XRD). Its density, absorbing water coefficient, macroporosity and campressive strength were measured also. Results: The main element of CPC is hydroxyapatite (HA) , its microstructure comprised of needlelike or petal crystals. The diameter of micropore was 4-10 nm, density was 1.922 g/cm3, macroporosity was 29. 777% , absorbing coefficient was 15. 503%, compressive strength was 42. 70 Mpa. Conclusion: This CPC has three-dimensional spatial structure, its strength meets the need of cancellous bone grafting.展开更多
Plasma-sprayed hydroxyapatite (HA) coatings have been widely utilized in load-bearing titanium alloy implants. In this study, Mg, Sr co-substituted HA ((Mg,Sr)-HA) nano-scale powders have been synthesized, which are f...Plasma-sprayed hydroxyapatite (HA) coatings have been widely utilized in load-bearing titanium alloy implants. In this study, Mg, Sr co-substituted HA ((Mg,Sr)-HA) nano-scale powders have been synthesized, which are further used to prepare (Mg,Sr)-HA coatings on Ti-6A1-4V alloys in order to improve the biological functions. The average size of (Mg,Sr)-HA nano particles is ~75nm. The average bonding strength for (Mg,Sr)-HA coating and samples after heat treatment at 500℃ or 600℃ for 3h are 26.17±2.11 MPa, 36.07±4.48 MPa and 37.07 ±2.95 MPa, respectively. There is a significantly increase of bonding strength likely due to low residual stress after heated treatment.MC3T3-E1 cells show a high proliferation rate when cultured with (Mg,Sr)-HA coating extract compared to the normal culture medium, which also exhibit large extension and depositi on of extracellular matrices when adhered on the coating surfaces. Thus, these (Mg,Sr)-HA coatings show high bonding strength and improved biological functions, which offer promising future applications in the fields of orthopedics and dentistry.展开更多
Magnesium is a candidate metal for biodegradable implant applications for its biodegradation tendency and excellent biocompatibility.Unfortunately,the high degradation rate of magnesium and also its localized degradat...Magnesium is a candidate metal for biodegradable implant applications for its biodegradation tendency and excellent biocompatibility.Unfortunately,the high degradation rate of magnesium and also its localized degradation in physiological conditions are the main issues for its successful implant applications.The degradation rate of magnesium has been reduced to some degree via alloying,but the localized degradation susceptibility is a great concern.For many years,hydroxyapatite(HAp),a biocompatible ceramic material,has been extensively used for bio-implant applications.Recently,a substantial amount of research has been carried out on coating HAp on magnesium-based materials for improved degradation resistance in particular and also to enhance the biocompatibility.This review article focuses on the different methods of HAp coating on magnesium-based materials and also the recent cutting-edge advancements made in the coating process for improved degradation resistance and biocompatibility.The mechanical stability of the HAp coated magnesium-based materials is also discussed.展开更多
A new biomimetic bone tissue engineering scaffold material, nano-HAI PLGA-（ PEG-Asp ）n composite, was synthesized by a biologically inspired self-assembling approach. A novel biodegradable PLGA- （ PEG-Asp ）n cop...A new biomimetic bone tissue engineering scaffold material, nano-HAI PLGA-（ PEG-Asp ）n composite, was synthesized by a biologically inspired self-assembling approach. A novel biodegradable PLGA- （ PEG-Asp ）n copolymer with pendant amine functional groups and enhanced hydrophilicity woo synthesized by bulk ring-opening copolymerization by DL-lactide（ DLLA） and glycolide（ GA ） with Aspartic acid （ Asp ）-Polyethylene glycol（PEG） alt-prepolymer. A Three-dimensional, porous scaffold of the PLGA-（ PEG- Asp）n copolymer was fabricated by a solvent casting , particulate leaching process. The scaffold woo then incubated in modified simulated body fluid （naSBF）. Growth of HA nanocrystals on the inner pore surfaces of the porous scaffold is confirmed by calcium ion binding analyses, SEM , mass increooe meoourements and quantification of phosphate content within scaffolds. SEM analysis demonstrated the nucleation and growth of a continuous bonelike, low crystalline carbonated HA nanocrystals on the inner pore surfaces of the PLGA- （ PEG-Asp ）n scaffolds. The amount of calcium binding, total mass and the mass of phosphate on experimental PLGA- （ PEG-Asp ） n scaffolds at different incubation times in mSBF was significantly greater than that of control PLGA scaffolds. This nano-HA/ PLGA-（ PEG- Asp ）n composite stunts some features of natural bone both in main composition and hierarchical microstrueture. The Asp- PEG alt-prepolymer modified PleA copolymer provide a controllable high surface density and distribution of anionic functional groups which would enhance nucleation and growth of bonelike mineral following exposure to mSBF. This biomimetic treatment provides a simple method for surface functionalization and sabsequent mineral nucleation and self-oosembling on bodegradable polymer scaffolds for tissue engineering.展开更多
The biodegradation and mechanical properties of self-designed hydroxyapatite/poly-DL-lactide (HA/PDLLA) composites were investigated in vitro and in vivo. In vitro, the specimens of HA/PDLLA and unfilled PDLLA with s...The biodegradation and mechanical properties of self-designed hydroxyapatite/poly-DL-lactide (HA/PDLLA) composites were investigated in vitro and in vivo. In vitro, the specimens of HA/PDLLA and unfilled PDLLA with similar molecular weights were immersed in phosphate-buffered saline. Ageing of the various devices were monitored by measuring molecular weight, water absorption, weight loss, PH, mechanical strengths and microstructural changes. The follow-up times were 2, 4, 6, 8, 10 and 12 weeks. In vivo, a transverse transcondylar osteotomy of the distal femur was fixed with a HA/PDLLA rod (diameter, 4.5 mm; length, 30 to approximately 40 mm). The follow-up times were 3, 6 and 12 weeks. Roentgenographic, histologic, and biomechanical studies were carried out. The results show that the HA/PDLLA composites have higher mechanical strength and slower degradation than that of the unfilled PDLLA and that of all osteotomies unite within six weeks without delay. Consequently, the HA/PDLLA composites possess sufficient mechanical strength for the fixation of cancellous osteotomies. (Author abstract) 5 Refs.展开更多
In this study, the biocompatible protective coating was formed using plasma electrolytic oxidation(PEO) on bioresorbable Mg-0.8Ca alloy. The composition of the formed coating was studied using XRD, SEM-EDX analysis, a...In this study, the biocompatible protective coating was formed using plasma electrolytic oxidation(PEO) on bioresorbable Mg-0.8Ca alloy. The composition of the formed coating was studied using XRD, SEM-EDX analysis, and micro-Raman spectroscopy. The uniform distribution of hydroxyapatite over the thickness of protective PEO-layer was established. Using traditional(EIS, PDP, OCP) and local scanning electrochemical methods(SVET, SIET with H^(+)-selective microelectrode), the level of protective properties of PEO-layer in a biological environment(mammalian cell culture medium, MEM) was determined. It was established that modification of Mg-0.8Ca alloy surface by PEO contributes to a significant increase in the corrosion resistance of the surface layer, making it possible to control the process of material‘s biodegradation. The maximum local electrochemical activity was recorded after 72 h of testing, while for the uncoated sample,intense corrosion degradation was recorded in the first 12 min of exposure to the cell culture medium. Formation of the PEO-coating results in a twofold decrease in the corrosion current density(2.8·10^(-6)A cm^(-2)) and an increase in the impedance modulus measured at a low frequency(1.7·10^(4)Ω cm^(2)) in comparison with the uncoated material(9.5·10^(-6)A cm^(-2);8.1·10^(3)Ω cm^(2)). The mechanism of material bioresorption was established and a model for biodegradation process of Mg-0.8Ca alloy with hydroxyapatite-containing PEO-coating in MEM was proposed. Analysis of these results and comparing with others obtained by various scientific groups indicate the prospects for application of biocompatible PEO-coating on Mg-Ca alloy in implant surgery.展开更多
Objective:The purpose of this study was to investigate the effects of a zinc-substituted nano-hydroxyapatite(Zn-HA) coating,applied by an electrochemical process,on implant osseointegraton in a rabbit model.Methods:A ...Objective:The purpose of this study was to investigate the effects of a zinc-substituted nano-hydroxyapatite(Zn-HA) coating,applied by an electrochemical process,on implant osseointegraton in a rabbit model.Methods:A Zn-HA coating or an HA coating was deposited using an electrochemical process.Surface morphology was examined using field-emission scanning electron microscopy.The crystal structure and chemical composition of the coatings were examined using an X-ray diffractometer(XRD) and Fourier transform infrared spectroscopy(FTIR).A total of 78 implants were inserted into femurs and tibias of rabbits.After two,four,and eight weeks,femurs and tibias were retrieved and prepared for histomorphometric evaluation and removal torque(RTQ) tests.Results:Rod-like HA crystals appeared on both implant surfaces.The dimensions of the Zn-HA crystals seemed to be smaller than those of HA.XRD patterns showed that the peaks of both coatings matched well with standard HA patterns.FTIR spectra showed that both coatings consisted of HA crystals.The Zn-HA coating significantly improved the bone area within all threads after four and eight weeks(P<0.05),the bone to implant contact(BIC) at four weeks(P<0.05),and RTQ values after four and eight weeks(P<0.05).Conclusions:The study showed that an electrochemically deposited Zn-HA coating has potential for improving bone integration with an implant surface.展开更多
文摘Hydroxyapatite nanoparticles(HAP NPs)were synthesized by a one‐step hydrothermal method.The surface of HAP NPs was grafted-SH and-COOH chelating groups via in situ surface‐modification with iminodiacetic acid(IDA)and 3‐mercaptopropyl trimethoxysilane(MPS)to afford dual surface‐capped nano‐amendment HAPIDA/MPS.The structure of HAP‐IDA/MPS was characterized,and its adsorption performance for Hg^(2+),Cu^(2+),Zn^(2+),Ni^(2+),Co^(2+),and Cd^(2+)was evaluated.The total adsorption capacity of 0.10 g HAP‐IDA/MPS nano‐amendment for Hg^(2+),Cu^(2+),Zn^(2+),Ni^(2+),Co^(2+),and Cd^(2+)with an initial mass concentration of 20 mg·L^(-1) reached 13.7 mg·g^(-1),about 4.3 times as much as that of HAP.Notably,HAP‐IDA/MPS nano‐amendment displayed the highest immobilization rate for Hg^(2+),possibly because of its chemical reaction with-SH to form sulfide,possessing the lowest solubility product constant among a variety of metal sulfides.
文摘Hydroxyapatite (HA) is widely explored as a biocompatible filler to enhance the mechanical and functional properties of glass ionomer cements (GICs). HA of particle sizes 15 µm and 30 µm were added as a filler into a matrix, composed of calcium aluminosilicate GICs and Poly-acrylic acid (PAA) in varying ratios. The tested ratios were Glass:PAA = 2:1 and Glass:HA:PAA = 2:0.5:1 to improve the mechanical strength of a conventional GIC. Mechanical properties, including compressive, flexural, and diametral tensile strength were studied at different setting times. The compressive strength (CS) was improved with hydroxyapatite addition and prolonged setting time while diametral tensile strength (DTS) did not follow any specific trend. The flexural strength (FS) of the composite cement was increased with increasing setting time regardless of the particle size of hydroxyapatite. The FTIR spectra of hydroxyapatite of particle sizes 15 μm and 30 μm are similar but for HA-GIC composites, the FTIR spectra, the peak around 1460 cm−1 are due to C-H and the peak at 1553 cm−1 is due to calcium carboxylate with calcium in a bridging mode which would be an excellent material that chemically bonds to the tooth structure, making it effective for both restorative procedures and cavity fillings. Scanning electron microscopy (SEM) microstructural study revealed that the glass particles were wrenched out, which was a cohesive fracture. The X-ray diffraction (XRD) pattern showed that the hydroxyapatite has a crystalline single-phase, hexagonal structure. The sharp peaks between the 2-theta range of 30 - 40 degrees are the same as in enamel powder. The spectra indicate the pure set cement as amorphous since there is no prominent peak, but with the addition of hydroxyapatite filler, the peak in the 2-theta range of 20 - 35 degrees is ascribed to crystalline apatite structure. The results indicate that incorporating hydroxyapatite into GIC significantly enhances its mechanical properties and structural integrity, suggesting its potential as an improved material for dental and restorative applications.
基金the Deanship of Research and Graduate Studies at King Khalid University for funding this work through Small Group Research Project under grant number RGP1/34/46 (RGP1/34/46)
文摘Biodegradable magnesium(Mg)alloys have received increased attention as temporary medical implants due to their mechanical properties and density,similar to natural bone.However,the fast corrosion of Mg alloys in a physiological condition limits their wide applications.Hence,hydroxyapatite(HAp)coatings on Mg alloys have attracted much attention to address this corrosion issue and enhance the surface functionalities.In this paper,we present a review of HAp coating strategies on Mg alloys,including the sol-gel method,hydrothermal treatment,biomimetic coating,electrochemical deposition,electrophoretic deposition,and plasma electrolytic oxidation technique,and their recent progress to enhance the surface characteristics of Mg alloys.This review focused on aspects of coating morphology,hybrid formulations,and how they influence corrosion behavior as well as in vitro and in vivo performance.Moreover,we have discussed the future prospects of HAp-coating strategies,emphasizing on multifunctional,hybrid,and smart coatings for next-generation implant materials.
文摘The field of bone tissue engineering has experienced an increase in prevalence due to the inherent challenge of the natural regeneration of significant bone deformities.This investigation focused on the preparation of Three-Dimensional(3D)-printed Polycaprolactone(PCL)scaffolds with varying proportions of Nanohydroxyapatite(NHA)and Nanoclay(NC),and their physiochemical and biological properties were assessed.The mechanical properties of PCL are satisfactory;however,its hydrophobic nature and long-term degradation hinder its use in scaffold fabrication.NHA and NC have been employed to improve the hydrophilic characteristics,mechanical strength,adhesive properties,biocompatibility,biodegradability,and osteoconductive behavior of PCL.The morphology results demonstrated 3D-printed structures with interconnected rectangular macropores and proper nanoparticle distribution.The sample containing 70 wt%NC showed the highest porosity(65.98±2.54%),leading to an increased degradation rate.The compressive strength ranged from 10.65±1.90 to 84.93±9.93 MPa,which is directly proportional to the compressive strength of cancellous bone(2–12 MPa).The wettability,water uptake,and biodegradability of PCL scaffolds considerably improved as the amount of NC increased.The results of the cellular assays exhibited increased proliferation,viability,and adhesion of MG-63 cells due to the addition of NHA and NC to the scaffolds.Finally,according to the in vitro results,it can be concluded that 3D-printed samples with higher amounts of NC can be regarded as a suitable scaffold for expediting the regeneration process of bone defects.
基金Projects(51102285,81170912)supported by the National Natural Science Foundation of ChinaProject supported by the Open Foundation of State Key Laboratory of Powder Metallurgy,China
文摘The mesoporous hydroxyapatite （HA） was synthesized by hydrothermal method utilizing cationic surfactant cetyltrimethylammonium bromide （CTAB） as template. The crystalline phase, morphology and porous structure were characterized respectively by different detecting techniques. The results reveal that the particles are highly crystalline hydroxyapatite phase. The surfactant has little influence on the morphology of the crystals, but affects the porous structure obviously. The sample without CTAB has a low surface area not exceeding 33 m^2/g, and no distinct pores can be observed by TEM. While the samples obtained with the surfactant get better parameters. Numerous open-ended pores centered at 2-7 nm spread unequally on the surface of the hydroxyapatite nanorods. The N2 adsorption-desorption experiments show type IV isotherms with distinct hysteresis loops, illustrating the presence of mesoporous structure. When the mole ratio of CTAB to HA is 1：2, the sample has the largest surface area of 97.1 m^2/g and pore volume of 0.466 cm^3/g.
基金Project(2013SK2024)supported by the Key Projects in Social Development Pillar Program of Hunan Province,ChinaProject(20130162120094)supported by Specialized Research Fund for the Doctoral Program of Higher Education(SRFDP),Ministry of Education,ChinaProjects(81071869,51305464)supported by the National Natural Science Foundation of China
文摘In order to further improve the transfection efficiency of hydroxyapatite nanoparticle （HAp）, arginine functionalized hydroxyapatite （HAp/Arg） was synthesized by hydrothermal synthesis. The morphology, crystallite size and zeta potential of the HAp/Arg were characterized by transmission electron microscopy （TEM）, atomic force microscopy （AFM） and zeta potential analyzer. The loading and protecting properties of HAp/Arg to DNA were tested by electrophoresis. Its cytotoxicity was also measured in Hela cells and HAEC cells by MTT and LDH, and its transfection efficiency was examined by fluorescence microscope and flow cytometry. The results reveal that HAp/Arg is short rod-like and nano single crystal, the mean diameter is 50-90 nm and zeta potential is 35.8 mV at pH 7.4. HAp/Arg to DNA can be condensed by electrostatic effect and protect DNA against degradation in DNase I, and shows high transfection efficiency without cytotoxicity. These results suggest that HAp/Arg can be a promising alternative as a novel gene delivery system.
文摘The mixture of CaHPO 4·2H 2O and CaCO 3 was ground in an aqueous system under appropriate conditions to investigate the mechanochemical reaction for the synthesis of crystalline hydroxyapatite (HA) powder. Hydroxyapatite of high crystallinity powder including trace Ca 10 (PO 4) 6CO 3(OH) and Ca 9HPO 4(PO 4) 6OH can be synthesized by mechanical activation without further thermal treatment at a high temperature. The synthesis reaction during the grinding process was almost completed within 1h. The as-ground powder exhibits a particle distribution of 20-100nm in size with a spherical or rodlike morphology. The composition and degree of crystallinity of the mechanochemical synthesized hydroxyapatite powders were coincident with the cement-type hydroxyapatite.
基金Project (81071869) supported by the National Natural Science Foundation of China Project (2009637526) supported by China Scholarship Council (CSC Program)Project (2010QZZD006) supported by the Key Program of Central South University Advancing Front Foundation
文摘The arginine-modified and europium-doped hydroxyapatite nanoparticles（HAP-Eu） were synthesized by hydrothermal synthesis.The prepared nanoparticles were characterized by transmission electron microscopy（TEM）,X-ray diffractometry（XRD）,Fourier transform infrared（FTIR） and zeta potential analyzer.The cell viability of HAP-Eu was tested by image flow cytometry.The results indicated that HAP-Eu is short column shapes and its size is approximately 100 nm,its zeta potential is about 30.10 mV at pH of 7.5,and shows no cytotoxicity in human epithelial cells and endothelial cells.
文摘Objective:To investigate possible effects of nanophase powder of hydroxyapatite on proliferation of periodontal ligament cells. Methods: With sol-gel method, the nanophase hydroxyapatite powders were fabricated. These powders were proved nanopaticles by transmission electron microscope. The effects on proliferation of periodontal ligament cell(PDLC) were observed in vitro with MTT [3-(4,5dimethylthiazo;-2-yl)-2,5-diphenytetralium bromide] method. Results: On the 2nd,3rd,4th day after treated with nanoparticles of hydroxyapatite, the proliferate activity of the PDLC increases significantly, compared with those with dense hydroxyaoatite and control but no significant difference could be found between the dense hydroxyapatite and the control. Conclusion: Nanophase hydroxyapatite can promote the regeneration of periodontal tissue.
基金Project supported by the Excellent Youth Science Foundation of Zhejiang Provincial Natural Science Foundation of China(No.R2110374)the Provincial Department Co-building Foundation of Health Bureau of Zhejiang Province,China(No.WKJ2011-2-009)
文摘The purpose of this study was to analyze the effect of strontium-substituted hydroxyapatite (Sr-HA) on bone osseointegration of the implants using fluorescence microscopy. We allocated 20 implants to two groups: Sr-HA group and HA group. Electrochemically deposited HA and Sr-HA coatings were applied onto the implants separately. All the implants were inserted into femur bone of rabbits. Oxytetracycline hydrochloride, alizarin-complexon, and calcein green were respectively administered 7, 28, and 46 d after the implantation. After eight weeks, femurs were retrieved and prepared for the fluorescence microscopy observation. We analyzed the bone mineral apposition rates (MARs), bone area ratios (BARs), and bone to implant contact (BIC) of the two groups. Fluorescence microscopic observation showed that all groups exhibited extensive early peri-implant bone formation. The MAR of the Sr-HA group was greater than that for pure HA from 7 to 28 d after implantation, but no significant difference was found at later stage. And the BIC showed difference at 7 and 28 d compared with pure HA. We concluded that Sr-HA coating can improve the bone osseointegration of the implant in the early stage compared with the HA coating.
文摘Fluorine-doped hydroxyapatite(FHA) and calcium deficient hydroxyapatite(CDHA) were coated on the surface biodegradable magnesium alloy using electrochemical deposition(ED) technique. Coating characterization was investigated X-ray diffraction(XRD), Fourier-transformed infrared spectroscopy(FTIR), transmission electron microscopy(TEM), scanni electron microscopy(SEM) and energy dispersive X-ray spectroscopy(EDS). The result shows that nano-FHA coated samp presents nano needle-like structure, which is oriented perpendicular to the surface of the substrate with denser and more unifo layers compared to the nano-CDHA coated sample. The nano-FHA coating shows smaller crystallite size(65 nm) compared to t nano-CDHA coating(95 nm); however, CDHA presents thicker layer(19 μm in thickness) compared to the nano-FHA(15 μm thickness). The corrosion behaviour determined by polarization, immersion and hydrogen evolution tests indicates that the nano-FH and nano-CDHA coatings significantly decrease corrosion rate and induce passivation. The nano-FHA and nano-CDHA coatings c accelerate the formation of bone-like apatite layer and significantly decrease the dissolution rate as compared to the uncoated M alloy. The nano-FHA coating provides effective protection to Mg alloy and presents the highest corrosion resistance. Therefore, t nano-FHA coating on Mg alloy is suggested as a great candidate for orthopaedic applications.
文摘In this paper, the behaviors of aqueous zinc sorption by hydroxyapatite in the co-existence of Pb^2＋, Cd^2＋ and Cu^2＋ are investigated, the effects of Pb^2＋, Cd^2＋ and Cu^2＋ on the sorption of Zn^2＋ are discussed, and the hydroxyapatite sorption capabilities for Pb^2＋, Cd^2＋, Cu^2＋ and Zn^2＋ are compared. The experimental results show that the Zn^2＋ removal efficiency decreases gradually with the increase of the Cd^2＋ concentration of the solution, and there is no sorption preference between Cd^2＋ and Zn^2＋. On the other hand, the Zn^2＋ removal efficiency rapidly decreases rapidly with the increase of the Cu^2＋ concentration of the solution, and there is a clear sorption preference between Cu^2＋ and Zn^2＋. It is noticed that the Zn^2＋ removal efficiency is hardly changed with the variance of Pb^2＋ concentration because the removal mechanisms for these two ions are totally different. It is concluded that the adsorption affinities of the heavy metals for the hydroxyapatite follows this sequence： pb^2＋〉 Cu^2＋〉 Cd^2＋〉 Zn^2＋.
基金Supported by Grant from the shaanxi Provincial Science and Technology Foundation(2000K_(14)-G_(16))
文摘Objective: To prepare hydroxyapatite cement (or calcium phosphate cement, CPC) and analyze its capability. Methods: Tetracalcium phosphate (TTCP) was prepared by the method of high heat. TTCP reacted with in simulated body situation and produced CPC, Its capability was analyzed by scanning electron microscopy (SEM) , X-ray diffraction(XRD). Its density, absorbing water coefficient, macroporosity and campressive strength were measured also. Results: The main element of CPC is hydroxyapatite (HA) , its microstructure comprised of needlelike or petal crystals. The diameter of micropore was 4-10 nm, density was 1.922 g/cm3, macroporosity was 29. 777% , absorbing coefficient was 15. 503%, compressive strength was 42. 70 Mpa. Conclusion: This CPC has three-dimensional spatial structure, its strength meets the need of cancellous bone grafting.
基金supported by the National Key Research and Development Program of China from Ministry of Science and Technology (No. 2016YFC1100502)the College Students’ Innovative Program of Liaoning Province (No. 201310163023)+2 种基金Key Research Program of Frontier Sciences (No. QYZDY-SSW-JSC027)the Hundred-Talent Program from Chinese Academy of Sciences (CAS)the Innovation Research Program from Institute of Metal Research, CAS (No. 2015-ZD01)
文摘Plasma-sprayed hydroxyapatite (HA) coatings have been widely utilized in load-bearing titanium alloy implants. In this study, Mg, Sr co-substituted HA ((Mg,Sr)-HA) nano-scale powders have been synthesized, which are further used to prepare (Mg,Sr)-HA coatings on Ti-6A1-4V alloys in order to improve the biological functions. The average size of (Mg,Sr)-HA nano particles is ~75nm. The average bonding strength for (Mg,Sr)-HA coating and samples after heat treatment at 500℃ or 600℃ for 3h are 26.17±2.11 MPa, 36.07±4.48 MPa and 37.07 ±2.95 MPa, respectively. There is a significantly increase of bonding strength likely due to low residual stress after heated treatment.MC3T3-E1 cells show a high proliferation rate when cultured with (Mg,Sr)-HA coating extract compared to the normal culture medium, which also exhibit large extension and depositi on of extracellular matrices when adhered on the coating surfaces. Thus, these (Mg,Sr)-HA coatings show high bonding strength and improved biological functions, which offer promising future applications in the fields of orthopedics and dentistry.
基金National Natural Science Foundation of China(Grant No.52071191)Open Foundation of Hubei Key Laboratory of Advanced Technology for Automotive Components(No.XDQCKF2021006)。
文摘Magnesium is a candidate metal for biodegradable implant applications for its biodegradation tendency and excellent biocompatibility.Unfortunately,the high degradation rate of magnesium and also its localized degradation in physiological conditions are the main issues for its successful implant applications.The degradation rate of magnesium has been reduced to some degree via alloying,but the localized degradation susceptibility is a great concern.For many years,hydroxyapatite(HAp),a biocompatible ceramic material,has been extensively used for bio-implant applications.Recently,a substantial amount of research has been carried out on coating HAp on magnesium-based materials for improved degradation resistance in particular and also to enhance the biocompatibility.This review article focuses on the different methods of HAp coating on magnesium-based materials and also the recent cutting-edge advancements made in the coating process for improved degradation resistance and biocompatibility.The mechanical stability of the HAp coated magnesium-based materials is also discussed.
文摘A new biomimetic bone tissue engineering scaffold material, nano-HAI PLGA-（ PEG-Asp ）n composite, was synthesized by a biologically inspired self-assembling approach. A novel biodegradable PLGA- （ PEG-Asp ）n copolymer with pendant amine functional groups and enhanced hydrophilicity woo synthesized by bulk ring-opening copolymerization by DL-lactide（ DLLA） and glycolide（ GA ） with Aspartic acid （ Asp ）-Polyethylene glycol（PEG） alt-prepolymer. A Three-dimensional, porous scaffold of the PLGA-（ PEG- Asp）n copolymer was fabricated by a solvent casting , particulate leaching process. The scaffold woo then incubated in modified simulated body fluid （naSBF）. Growth of HA nanocrystals on the inner pore surfaces of the porous scaffold is confirmed by calcium ion binding analyses, SEM , mass increooe meoourements and quantification of phosphate content within scaffolds. SEM analysis demonstrated the nucleation and growth of a continuous bonelike, low crystalline carbonated HA nanocrystals on the inner pore surfaces of the PLGA- （ PEG-Asp ）n scaffolds. The amount of calcium binding, total mass and the mass of phosphate on experimental PLGA- （ PEG-Asp ） n scaffolds at different incubation times in mSBF was significantly greater than that of control PLGA scaffolds. This nano-HA/ PLGA-（ PEG- Asp ）n composite stunts some features of natural bone both in main composition and hierarchical microstrueture. The Asp- PEG alt-prepolymer modified PleA copolymer provide a controllable high surface density and distribution of anionic functional groups which would enhance nucleation and growth of bonelike mineral following exposure to mSBF. This biomimetic treatment provides a simple method for surface functionalization and sabsequent mineral nucleation and self-oosembling on bodegradable polymer scaffolds for tissue engineering.
文摘The biodegradation and mechanical properties of self-designed hydroxyapatite/poly-DL-lactide (HA/PDLLA) composites were investigated in vitro and in vivo. In vitro, the specimens of HA/PDLLA and unfilled PDLLA with similar molecular weights were immersed in phosphate-buffered saline. Ageing of the various devices were monitored by measuring molecular weight, water absorption, weight loss, PH, mechanical strengths and microstructural changes. The follow-up times were 2, 4, 6, 8, 10 and 12 weeks. In vivo, a transverse transcondylar osteotomy of the distal femur was fixed with a HA/PDLLA rod (diameter, 4.5 mm; length, 30 to approximately 40 mm). The follow-up times were 3, 6 and 12 weeks. Roentgenographic, histologic, and biomechanical studies were carried out. The results show that the HA/PDLLA composites have higher mechanical strength and slower degradation than that of the unfilled PDLLA and that of all osteotomies unite within six weeks without delay. Consequently, the HA/PDLLA composites possess sufficient mechanical strength for the fixation of cancellous osteotomies. (Author abstract) 5 Refs.
基金Local electrochemical tests,biocompatible coating formation and modeling the mechanism of the material degradation were supported by the Grant of Russian Science Foundation,Russia (project no.21-73-10148,https://rscf.ru/en/project/ 21-73-10148/)The study of material‘s structure,composition,and kinetics of the corrosion processes using traditional electrochemical methods was supported by the Grant of Russian Science Foundation,Russia (project no.20-13-00130,https://rscf.ru/en/project/20-13-00130/)XRD data were acquired under the government assignments from the Ministry of Science and Higher Education of the Russian Federation,Russia (project no.FWFN(0205)-2022-0003)。
文摘In this study, the biocompatible protective coating was formed using plasma electrolytic oxidation(PEO) on bioresorbable Mg-0.8Ca alloy. The composition of the formed coating was studied using XRD, SEM-EDX analysis, and micro-Raman spectroscopy. The uniform distribution of hydroxyapatite over the thickness of protective PEO-layer was established. Using traditional(EIS, PDP, OCP) and local scanning electrochemical methods(SVET, SIET with H^(+)-selective microelectrode), the level of protective properties of PEO-layer in a biological environment(mammalian cell culture medium, MEM) was determined. It was established that modification of Mg-0.8Ca alloy surface by PEO contributes to a significant increase in the corrosion resistance of the surface layer, making it possible to control the process of material‘s biodegradation. The maximum local electrochemical activity was recorded after 72 h of testing, while for the uncoated sample,intense corrosion degradation was recorded in the first 12 min of exposure to the cell culture medium. Formation of the PEO-coating results in a twofold decrease in the corrosion current density(2.8·10^(-6)A cm^(-2)) and an increase in the impedance modulus measured at a low frequency(1.7·10^(4)Ω cm^(2)) in comparison with the uncoated material(9.5·10^(-6)A cm^(-2);8.1·10^(3)Ω cm^(2)). The mechanism of material bioresorption was established and a model for biodegradation process of Mg-0.8Ca alloy with hydroxyapatite-containing PEO-coating in MEM was proposed. Analysis of these results and comparing with others obtained by various scientific groups indicate the prospects for application of biocompatible PEO-coating on Mg-Ca alloy in implant surgery.
基金Project supported by the National Natural Science Foundation of China (No. 81000462)the Zhejiang Provincial Natural Science Foundation (No. R2110374),China
文摘Objective:The purpose of this study was to investigate the effects of a zinc-substituted nano-hydroxyapatite(Zn-HA) coating,applied by an electrochemical process,on implant osseointegraton in a rabbit model.Methods:A Zn-HA coating or an HA coating was deposited using an electrochemical process.Surface morphology was examined using field-emission scanning electron microscopy.The crystal structure and chemical composition of the coatings were examined using an X-ray diffractometer(XRD) and Fourier transform infrared spectroscopy(FTIR).A total of 78 implants were inserted into femurs and tibias of rabbits.After two,four,and eight weeks,femurs and tibias were retrieved and prepared for histomorphometric evaluation and removal torque(RTQ) tests.Results:Rod-like HA crystals appeared on both implant surfaces.The dimensions of the Zn-HA crystals seemed to be smaller than those of HA.XRD patterns showed that the peaks of both coatings matched well with standard HA patterns.FTIR spectra showed that both coatings consisted of HA crystals.The Zn-HA coating significantly improved the bone area within all threads after four and eight weeks(P<0.05),the bone to implant contact(BIC) at four weeks(P<0.05),and RTQ values after four and eight weeks(P<0.05).Conclusions:The study showed that an electrochemically deposited Zn-HA coating has potential for improving bone integration with an implant surface.
