A floating horizontal-axis tidal current turbine(HATT)is an underwater power generation device where cavitation inevitably occurs on blade surfaces,severely affecting a turbine’s lifespan.Under wave action,these floa...A floating horizontal-axis tidal current turbine(HATT)is an underwater power generation device where cavitation inevitably occurs on blade surfaces,severely affecting a turbine’s lifespan.Under wave action,these floating turbines exhibit six degrees of freedom motion,potentially intensifying the cavitation on the blade surfaces.This study selects three types of oscillatory motions from the six degrees of freedom:roll,yaw,and pitch.Computational fluid dynamics(CFD)methods are used for numerical calculations,and transient simulations of multiphase flow are conducted on the basis of the Reynolds-Averaged Navier-Stokes(RANS)model.Research has revealed strong correlations between flow velocity,the blade tip speed ratio,and cavitation.During oscillatory motion,the motion period and amplitude also significantly impact cavitation.In roll motion,the cavitation rate can increase by up to 59%with decreasing period,whereas in pitch and yaw motions,the increases are 7.57 times and 36%larger,respectively.With an increase in amplitude during roll motion,the cavitation rate can increase by up to 1.08 times,whereas in pitch and yaw motions,the increases are 3.49 times and 45%,respectively.The cavitation rate on the blade surfaces is the highest in pitch motion,followed by roll and yaw motions.展开更多
Determination of the aerodynamic configuration of wake is the key to analysis and evaluation of the rotor aerodynamic characteristics of a horizontal-axis wind turbine. According to the aerodynamic configuration, the ...Determination of the aerodynamic configuration of wake is the key to analysis and evaluation of the rotor aerodynamic characteristics of a horizontal-axis wind turbine. According to the aerodynamic configuration, the real magnitude and direction of the onflow velocity at the rotor blade can be determined, and subsequently, the aerodynamic force on the rotor can be determined. The commonly employed wake aerodynamic models are of the cylindrical form instead of the actual expanding one. This is because the influence of the radial component of the induced velocity on the wake configuration is neglected. Therefore, this model should be called a "linear model". Using this model means that the induced velocities at the rotor blades and aerodynamic loads on them would be inexact. An approximately accurate approach is proposed in this paper to determine the so-called "nonlinear" wake aerodynamic configuration by means of the potential theory, where the influence of all three coordinate components of the induced velocity on wake aerodynamic configuration is taken into account to obtain a kind of expanding wake that approximately looks like an actual one. First, the rotor aerodynamic model composed of axial (central), bound, and trailing vortexes is established with the help of the finite aspect wing theory. Then, the Biot-Savart formula for the potential flow theory is used to derive a set of integral equations to evaluate the three components of the induced velocity at any point within the wake. The numerical solution to the integral equations is found, and the loci of all elementary trailing vortex filaments behind the rotor are determined thereafter. Finally, to formulate an actual wind turbine rotor, using the nonlinear wake model, the induced velocity everywhere in the wake, especially that at the rotor blade, is obtained in the case of various tip speed ratios and compared with the wake boundary in a neutral atmospheric boundary layer. Hereby, some useful and referential conclusions are offered for the aerodynamic computation and design of the rotor of the horizontal-axis wind turbine.展开更多
An experimental investigation on the properties of the near wake behind the rotor of a Horizontal-Axis Wind Turbine （HAWT） was carried out at model scale. Measurements were made with a stationary slanted hot-wire an...An experimental investigation on the properties of the near wake behind the rotor of a Horizontal-Axis Wind Turbine （HAWT） was carried out at model scale. Measurements were made with a stationary slanted hot-wire anemometer using the technique of phase-locked averaging. The primary aim is to study the formation and development of the three-dimensional wake. Five axial locations were chosen within four chord lengths of the blades over a range of tip speed ratios. The results show that during the downstream developmerit of the wake, the wake centre traces a helical curve with its rotation direction opposite to that of the rotor. The distribution of mean velocity behind the HAWT rotor reveals an expansion and a decay of the three-dimensional wake. The shapes of the mean velocity distribution are similar along the blades span at the same downstream axial location. It is shown that the turbulence levels in the wake are higher than those in the non-wake region. The circumferential component and the radial component of the turbulence intensity are higher than the axial component. Our study offers some food of thought for better understanding of the physical features of the flow field as well as the performance of HAWT.展开更多
The floating horizontal-axis tidal turbine(FHATT)stands out as the most commercially viable tidal energy device.This paper reviews recent literature on FHATT and summarizes experimental and computational fluid dynamic...The floating horizontal-axis tidal turbine(FHATT)stands out as the most commercially viable tidal energy device.This paper reviews recent literature on FHATT and summarizes experimental and computational fluid dynamics(CFD)methods employed in FHATT research.Based on this foundation,the coupling effects of wave and platform motion(pitch/roll)on FHATT hydrodynamic performance were investigated through flume experiments and CFD simulations.The variations of the power coefficient(C_(P))and thrust coefficient(C_(T))are analyzed under different platform motion periods,amplitudes,wave periods,and wave heights.The results demonstrate that under the coupling of waves and pitch motion,C_(P),C_(T)exhibit dual-frequency oscillations based on the pitch period,with oscillation amplitudes increasing with both pitch frequency(wave frequency)and pitch amplitude(wave height).Within the working conditions of this study,the maximum mean output power under the coupling of pitch motion and waves increases by 26.1%.The maximum fluctuation amplitude of C_(P)reaches 349.8%.When waves and roll motion are coupled,wave parameters dominate,while the influence of roll motion can be ignored.Moreover,the hydrodynamic fluctuations induced by waves and platform motion can couple with each other.This coupling effect not only amplifies the fluctuation amplitude of hydrodynamic coefficients but also has the potential to offset each other.These findings provide insights into the structural design and system control of FHATT,serving as valuable references for FHATT development.展开更多
Flow field around a two-bladed horizontal-axis wind turbine(HAWT)is simulated at various tip speed ratios to investigate its wake characteristics by analyzing the tip and root vortex trajectories in the nearwake,as we...Flow field around a two-bladed horizontal-axis wind turbine(HAWT)is simulated at various tip speed ratios to investigate its wake characteristics by analyzing the tip and root vortex trajectories in the nearwake,as well as the vertical profiles of the axial velocity.Results show that the pitch of the tip vortex varies inversely with the tip speed ratio.Radial expansion of the tip vortices becomes more obvious as the tip speed ratio increases.Tip vortices shed not exactly from the blade tip but from the blade span of 96.5%—99%radius of the rotor.The axial velocity profiles are transformed into V-shape from W-shape at the distance downstream of eight rotor diameters due to the momentum recovery.展开更多
The high-speed supercritical flow in steeply sloped channels contains a significant amount of hydro-kinetic energy. A novel, horizontal axis, spillway turbine as presented in this paper attempts to convert that energy...The high-speed supercritical flow in steeply sloped channels contains a significant amount of hydro-kinetic energy. A novel, horizontal axis, spillway turbine as presented in this paper attempts to convert that energy into electricity. We report on the turbine’s design and experimental testing. Its intended use is in low-head, low-flow, manmade, concrete-lined channels such as chutes, spillways and other similar steeply sloped open-channels. The design lends itself from an impulse turbine runner but without a pipe or a nozzle. The spillway turbine consists of 2 main components: 1) the runner and 2) an accelerator channel that directs the water towards the runner’s blades. The runner, once fitted with Pelton-inspired “cup inserts” shows performance improvements both in terms of efficiency and specific speeds. The specific speed and the speed factors calculated confirm that this novel spillway turbine runner can be categorized as an impulse turbine. The maximum efficiency obtained during laboratory testing is 43.4% and hence competes well with standard hydrokinetic turbines.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.52171261).
文摘A floating horizontal-axis tidal current turbine(HATT)is an underwater power generation device where cavitation inevitably occurs on blade surfaces,severely affecting a turbine’s lifespan.Under wave action,these floating turbines exhibit six degrees of freedom motion,potentially intensifying the cavitation on the blade surfaces.This study selects three types of oscillatory motions from the six degrees of freedom:roll,yaw,and pitch.Computational fluid dynamics(CFD)methods are used for numerical calculations,and transient simulations of multiphase flow are conducted on the basis of the Reynolds-Averaged Navier-Stokes(RANS)model.Research has revealed strong correlations between flow velocity,the blade tip speed ratio,and cavitation.During oscillatory motion,the motion period and amplitude also significantly impact cavitation.In roll motion,the cavitation rate can increase by up to 59%with decreasing period,whereas in pitch and yaw motions,the increases are 7.57 times and 36%larger,respectively.With an increase in amplitude during roll motion,the cavitation rate can increase by up to 1.08 times,whereas in pitch and yaw motions,the increases are 3.49 times and 45%,respectively.The cavitation rate on the blade surfaces is the highest in pitch motion,followed by roll and yaw motions.
基金Project supported by the National Basic Research Program of China(No.2014CB046201)the National Natural Science Foundation of China(Nos.51766009,51566011,and 51479114)
文摘Determination of the aerodynamic configuration of wake is the key to analysis and evaluation of the rotor aerodynamic characteristics of a horizontal-axis wind turbine. According to the aerodynamic configuration, the real magnitude and direction of the onflow velocity at the rotor blade can be determined, and subsequently, the aerodynamic force on the rotor can be determined. The commonly employed wake aerodynamic models are of the cylindrical form instead of the actual expanding one. This is because the influence of the radial component of the induced velocity on the wake configuration is neglected. Therefore, this model should be called a "linear model". Using this model means that the induced velocities at the rotor blades and aerodynamic loads on them would be inexact. An approximately accurate approach is proposed in this paper to determine the so-called "nonlinear" wake aerodynamic configuration by means of the potential theory, where the influence of all three coordinate components of the induced velocity on wake aerodynamic configuration is taken into account to obtain a kind of expanding wake that approximately looks like an actual one. First, the rotor aerodynamic model composed of axial (central), bound, and trailing vortexes is established with the help of the finite aspect wing theory. Then, the Biot-Savart formula for the potential flow theory is used to derive a set of integral equations to evaluate the three components of the induced velocity at any point within the wake. The numerical solution to the integral equations is found, and the loci of all elementary trailing vortex filaments behind the rotor are determined thereafter. Finally, to formulate an actual wind turbine rotor, using the nonlinear wake model, the induced velocity everywhere in the wake, especially that at the rotor blade, is obtained in the case of various tip speed ratios and compared with the wake boundary in a neutral atmospheric boundary layer. Hereby, some useful and referential conclusions are offered for the aerodynamic computation and design of the rotor of the horizontal-axis wind turbine.
基金Project supported by the National Natural Science Foundation of China(Grant No.50706025)the Shanghai Municipal Education Commission of China(Grant No.07ZZ144).
文摘An experimental investigation on the properties of the near wake behind the rotor of a Horizontal-Axis Wind Turbine （HAWT） was carried out at model scale. Measurements were made with a stationary slanted hot-wire anemometer using the technique of phase-locked averaging. The primary aim is to study the formation and development of the three-dimensional wake. Five axial locations were chosen within four chord lengths of the blades over a range of tip speed ratios. The results show that during the downstream developmerit of the wake, the wake centre traces a helical curve with its rotation direction opposite to that of the rotor. The distribution of mean velocity behind the HAWT rotor reveals an expansion and a decay of the three-dimensional wake. The shapes of the mean velocity distribution are similar along the blades span at the same downstream axial location. It is shown that the turbulence levels in the wake are higher than those in the non-wake region. The circumferential component and the radial component of the turbulence intensity are higher than the axial component. Our study offers some food of thought for better understanding of the physical features of the flow field as well as the performance of HAWT.
基金supported by the National Natural Science Foundation of China(Grant No.U1706227)supported by the R&D Program of Beijing Municipal Education Commission(Grant No.KZ20231001720)the Open Fund Project of Key Laboratory of Ocean Observation Technology,MNR(Grant No.2022klootA03).
文摘The floating horizontal-axis tidal turbine(FHATT)stands out as the most commercially viable tidal energy device.This paper reviews recent literature on FHATT and summarizes experimental and computational fluid dynamics(CFD)methods employed in FHATT research.Based on this foundation,the coupling effects of wave and platform motion(pitch/roll)on FHATT hydrodynamic performance were investigated through flume experiments and CFD simulations.The variations of the power coefficient(C_(P))and thrust coefficient(C_(T))are analyzed under different platform motion periods,amplitudes,wave periods,and wave heights.The results demonstrate that under the coupling of waves and pitch motion,C_(P),C_(T)exhibit dual-frequency oscillations based on the pitch period,with oscillation amplitudes increasing with both pitch frequency(wave frequency)and pitch amplitude(wave height).Within the working conditions of this study,the maximum mean output power under the coupling of pitch motion and waves increases by 26.1%.The maximum fluctuation amplitude of C_(P)reaches 349.8%.When waves and roll motion are coupled,wave parameters dominate,while the influence of roll motion can be ignored.Moreover,the hydrodynamic fluctuations induced by waves and platform motion can couple with each other.This coupling effect not only amplifies the fluctuation amplitude of hydrodynamic coefficients but also has the potential to offset each other.These findings provide insights into the structural design and system control of FHATT,serving as valuable references for FHATT development.
基金supported partly by the National Basic Research Program of China(″973″Program)(No.2014CB046201)the National Natural Science Foundation of China(No.51166009)+5 种基金the National High Technology Research and Development Program of China(No2012AA052900)the Natural Science Foundation of Gansu ProvinceChina(No.1308RJZA283145RJZA059)the Gansu Province University Scientific Research ProjectChina(No.2013A-026)
文摘Flow field around a two-bladed horizontal-axis wind turbine(HAWT)is simulated at various tip speed ratios to investigate its wake characteristics by analyzing the tip and root vortex trajectories in the nearwake,as well as the vertical profiles of the axial velocity.Results show that the pitch of the tip vortex varies inversely with the tip speed ratio.Radial expansion of the tip vortices becomes more obvious as the tip speed ratio increases.Tip vortices shed not exactly from the blade tip but from the blade span of 96.5%—99%radius of the rotor.The axial velocity profiles are transformed into V-shape from W-shape at the distance downstream of eight rotor diameters due to the momentum recovery.
文摘The high-speed supercritical flow in steeply sloped channels contains a significant amount of hydro-kinetic energy. A novel, horizontal axis, spillway turbine as presented in this paper attempts to convert that energy into electricity. We report on the turbine’s design and experimental testing. Its intended use is in low-head, low-flow, manmade, concrete-lined channels such as chutes, spillways and other similar steeply sloped open-channels. The design lends itself from an impulse turbine runner but without a pipe or a nozzle. The spillway turbine consists of 2 main components: 1) the runner and 2) an accelerator channel that directs the water towards the runner’s blades. The runner, once fitted with Pelton-inspired “cup inserts” shows performance improvements both in terms of efficiency and specific speeds. The specific speed and the speed factors calculated confirm that this novel spillway turbine runner can be categorized as an impulse turbine. The maximum efficiency obtained during laboratory testing is 43.4% and hence competes well with standard hydrokinetic turbines.
