Two-dimensional double-layer honeycomb(DLHC)materials are known for their diverse physical properties,but superconductivity has been a notably absent characteristic in this structure.We address this gap by investigati...Two-dimensional double-layer honeycomb(DLHC)materials are known for their diverse physical properties,but superconductivity has been a notably absent characteristic in this structure.We address this gap by investigating M_(2)N_(2)(M=Nb,Ta)with DLHC structure using first-principles calculations.Our results show that M_(2)N_(2)are stable and metallic,exhibiting superconducting behavior.Specifically,Nb_(2)N_(2)and Ta_(2)N_(2)display superconducting transition temperatures of 6.8 K and 8.8 K,respectively.Their electron-phonon coupling is predominantly driven by the coupling between metal d-orbitals and low-frequency metal-dominated vibration modes.Interestingly,two compounds also exhibit non-trivial band topology.Thus,M_(2)N_(2)are promising platforms for studying the interplay between topology and superconductivity and fill the gap in superconductivity research for DLHC materials.展开更多
With the rapid development of 5G communication technology and wearable electronic devices,the demand for low-reflection electromagnetic interference(EMI)shielding materials is becoming increasingly urgent.In this work...With the rapid development of 5G communication technology and wearable electronic devices,the demand for low-reflection electromagnetic interference(EMI)shielding materials is becoming increasingly urgent.In this work,reduced graphene oxide-MXene(rGMH)@FeNi/epoxy EMI shielding composites with a regular honeycomb structure were successfully prepared by the combination of surface functionalization modification,sacrificial template,and freeze-drying.The effects of magnetic FeNi alloy particle loading mode and loading amount on the EMI shielding performance of composites were investigated.The results show that rGMH@FeNi/epoxy EMI shielding composites have the highest EMI shielding effectiveness(EMI SE)and the lowest reflection shielding effectiveness when magnetic FeNi alloy particles are loaded only on the graphene skeleton.In this composite,the EMI SE value of the composite is 61 dB when the rGMH@FeNi mass fraction is 5.4 wt%(f-FeNi mass fraction is 0.9 wt%),which is 4.7 times that of the blended rGO/MXene/FeNi/epoxy resin composite(13 dB)with the same mass fraction.At the same time,the rGMH@FeNi/epoxy composite has excellent thermal stability(heat-resistance index of 190.3℃)and mechanical properties(energy storage modulus of 8606.7 MPa).These polymer-based EMI shielding composites with excellent EMI shielding properties and low reflection effectiveness have great potential in the protection of high-power,portable and wearable electronic devices against electromagnetic pollution.展开更多
With the rapid development of fifth-generation mobile com-munication technology and wearable electronic devices,electromagnetic interference and radiation pollution caused by electromagnetic waves have attracted world...With the rapid development of fifth-generation mobile com-munication technology and wearable electronic devices,electromagnetic interference and radiation pollution caused by electromagnetic waves have attracted worldwide attention.Therefore,the design and development of highly efficient EMI shielding materials are of great importance.In this work,the three-dimensional graphene oxide(GO)with regular honeycomb structure(GH)is firstly constructed by sacrificial template and freeze-dry-ing methods.Then,the amino functionalized FeNi alloy particles(f-FeNi)are loaded on the GH skeleton followed by in-situ reduction to prepare rGH@FeNi aerogel.Finally,the rGH@FeNi/epoxy EMI shielding com-posites with regular honeycomb structure is obtained by vacuum-assisted impregnation of epoxy resin.Benefitting from the construction of regular honeycomb structure and electromagnetic synergistic effect,the rGH@FeNi/epoxy composites with a low rGH@FeNi mass fraction of 2.1 wt%(rGH and f-FeNi are 1.2 and 0.9 wt%,respectively)exhibit a high EMI shielding effectiveness(EMI SE)of 46 dB,which is 5.8 times of that(8 dB)for rGO/FeNi/epoxy composites with the same rGO/FeNi mass fraction.At the same time,the rGH@FeNi/epoxy composites also possess excellent thermal stability(heat-resistance index and temperature at the maximum decomposition rate are 179.1 and 389.0°C respectively)and mechanical properties(storage modulus is 8296.2 MPa).展开更多
Wave propagation in two-dimensional hierarchical honeycomb structures with two- order hierarchy is investigated by using the symplectic algorithm. By applying the variational prin- ciple to the dual variables, the wav...Wave propagation in two-dimensional hierarchical honeycomb structures with two- order hierarchy is investigated by using the symplectic algorithm. By applying the variational prin- ciple to the dual variables, the wave propagation problem is transformed into a two-dimensional symplectie eigenvalue problem. The band gaps and spatial filtering phenomena are examined to find the stop bands and directional stop bands. Special attention is directed to the effects of the relative density and the length ratio on the band gaps and phase constant surfaces. This work provides new opportunities for designing hierarchical honeycomb structures in sound insulation applications.展开更多
Thermal infrared camouflage technology has attracted increasing attention with the progress of infrared surveillance technologies.Inspired by honeycombs,a thermal infrared camouflage film with honeycomb sandwich struc...Thermal infrared camouflage technology has attracted increasing attention with the progress of infrared surveillance technologies.Inspired by honeycombs,a thermal infrared camouflage film with honeycomb sandwich structure based on fluid and temperature control is proposed to cloak objects and display false targets in the thermal infrared spectrum.The structure and manufacturing method of the film are introduced,and the fluid and temperature control system is established and tested to explore the thermal infrared characteristics of the film composed of different thermal units.The camouflage performance of the film is intuitively displayed through the temperature frequency histograms of the infrared images photographed by an infrared camera.The temperature control accuracy of the thermal infrared camouflage system and the dynamic camouflage response of the film are evaluated by the temperature distribution map of each pixel in infrared images and the salient degree values.Furthermore,the influential factors on the camouflage responding time are investigated,including the heating and cooling time of the liquid,the flow rate of pumps inside the driving module,and the energy loss along the liquid lines.An application of displaying false target is also introduced and tested.The results show that the camouflage film has a well camouflage effect and a wide adjustment temperature range,showing promise for a broad range of potential applications,such as counter-surveillance,thermal control and heat shielding.展开更多
High-speed impact threats and terrorist actions on the battlefield require the development of more effective protective materials and structures,and various protective structure is designed according their energy-abso...High-speed impact threats and terrorist actions on the battlefield require the development of more effective protective materials and structures,and various protective structure is designed according their energy-absorbing characteristics.In this research,the deformation behavior,microscopic failure modes and energy absorption characteristics of re-entrant hexagonal structure,regular hexagonal structure and regular quadrilateral structure are studied under different strain rates impact.The re-entrant hexagonal structure forms a“X”-shaped deformation zone,the regular quadrilateral and regular hexagonal structure form an“I”-shaped deformation zone.The microscopic appearance of the section is a mixed fracture form.The effects of the topological shape,cell angle,and cell height on the impact behavior of the structure were evaluated.When the cell height is fixed and the cell angle is changed,the energy absorption of the structure increase and then decrease as the relative density increase.The mechanical properties of the structure are optimal when the relative density is about 18.6%and the cell angle is22.5°.When the cell angle is fixed and the cell height is changed,as the relative density increases,the energy absorption of the structure gradually increases.The regular quadrilateral structure and the reentrant hexagonal structure experienced clear strain rate effects under dynamic impact conditions;the regular hexagonal structure did not exhibit obvious strain rate effects.The results presented herein provide a basis for further rational design and selection of shock-resistant protective structures that perform well in high-speed impact environments.展开更多
The novelty of this research lies in the successful fabrication of a 3D-printed honeycomb structure filled with nanofillers for acoustic properties,utilizing an impedance tube setup in accordance with ASTM standard E ...The novelty of this research lies in the successful fabrication of a 3D-printed honeycomb structure filled with nanofillers for acoustic properties,utilizing an impedance tube setup in accordance with ASTM standard E 1050-12.The Creality Ender-3,a 3D printer,was used for printing the honeycomb structures,and polylactic acid(PLA)material was employed for their construction.The organic,inorganic,and polymeric compounds within the composites were identified using fourier transformation infrared(FTIR)spectroscopy.The structure and homogeneity of the samples were examined using a field emission scanning electron microscope(FESEM).To determine the sound absorption coefficient of the 3D printed honeycomb structure,numerous samples were systematically developed using central composite design(CCD)and analysed using response surface methodology(RSM).The RSM mathematical model was established to predict the optimum values of each factor and noise reduction coefficient(NRC).The optimum values for an NRC of 0.377 were found to be 1.116 wt% carbon black,1.025 wt% aluminium powder,and 3.151 mm distance between parallel edges.Overall,the results demonstrate that a 3Dprinted honeycomb structure filled with nanofillers is an excellent material that can be utilized in various fields,including defence and aviation,where lightweight and acoustic properties are of great importance.展开更多
The impedance matching of absorbers is a vital factor affecting their microwave absorption(MA)properties.In this work,we controllably synthesized Material of Institute Lavoisier 88C(MIL-88C)with varying aspect ratios(...The impedance matching of absorbers is a vital factor affecting their microwave absorption(MA)properties.In this work,we controllably synthesized Material of Institute Lavoisier 88C(MIL-88C)with varying aspect ratios(AR)as a precursor by regulating oil bath conditions,followed by one-step thermal decomposition to obtain carbon-coated iron-based composites.Modifying the precursor MIL-88C(Fe)preparation conditions,such as the molar ratio between metal ions and organic ligands(M/O),oil bath temperature,and oil bath time,influenced the phases,graphitization degree,and AR of the derivatives,enabling low filler loading,achieving well-matched impedance,and ensuring outstanding MA properties.The MOF-derivatives 2(MD_(2))/polyvinylidene Difluoride(PVDF),MD_(3)/PVDF,and MD4/PVDF absorbers all exhibited excellent MA properties with optimal filler loadings below 20 wt%and as low as 5 wt%.The MD_(2)/PVDF(5 wt%)achieved a maximum effective absorption bandwidth(EAB)of 5.52 GHz(1.90 mm).The MD_(3)/PVDF(10 wt%)possessed a minimum reflection loss(RL_(min))value of−67.4 at 12.56 GHz(2.13 mm).A symmetric gradient honeycomb structure(SGHS)was constructed utilizing the high-frequency structure simulator(HFSS)to further extend the EAB,achieving an EAB of 14.6 GHz and a RL_(min) of−59.0 dB.This research offers a viable inspiration to creating structures or materials with high-efficiency MA properties.展开更多
Based on the symmetric re-entrant honeycomb(S-RH)structure with negative Poisson’s ratios,a novel asymmetric and rotatable re-entrant honeycomb(AR-RH)structure was proposed.Both the S-RH structure and AR-RH structure...Based on the symmetric re-entrant honeycomb(S-RH)structure with negative Poisson’s ratios,a novel asymmetric and rotatable re-entrant honeycomb(AR-RH)structure was proposed.Both the S-RH structure and AR-RH structure were produced by the 3D printing technology.Through experimental test and finite element simulation,the deformation mechanism and energy absorption characteristics of the AR-RH structure and the S-RH structure with negative Poisson’s ratios at different impact velocities were compared.The experimental test and finite element simulation results show that the novel AR-RH structure with negative Poisson’s ratios has stronger energy absorption capacity than the S-RH structure,and it has been verified that the rotatability of AR-RH can indeed absorb energy.Furthermore,the degree of asymmetry of the AR-RH structure was discussed.展开更多
The high variability of shock in terrorist attacks poses a threat to people's lives and properties,necessitating the development of more effective protective structures.This study focuses on the angle gradient and...The high variability of shock in terrorist attacks poses a threat to people's lives and properties,necessitating the development of more effective protective structures.This study focuses on the angle gradient and proposes four different configurations of concave hexagonal honeycomb structures.The structures'macroscopic deformation behavior,stress-strain relationship,and energy dissipation characteristics are evaluated through quasi-static compression and Hopkinson pressure bar impact experiments.The study reveals that,under varying strain rates,the structures deform starting from the weak layer and exhibit significant interlayer separation.Additionally,interlayer shear slip becomes more pronounced with increasing strain rate.In terms of quasi-static compression,symmetric gradient structures demonstrate superior energy absorption,particularly the symmetric negative gradient structure(SNG-SMS)with a specific energy absorption of 13.77 J/cm~3.For dynamic impact,unidirectional gradient structures exhibit exceptional energy absorption,particularly the unidirectional positive gradient honeycomb structure(UPG-SML)with outstanding mechanical properties.The angle gradient design plays a crucial role in determining the structure's stability and deformation mode during impact.Fewer interlayer separations result in a more pronounced negative Poisson's ratio effect and enhance the structure's energy absorption capacity.These findings provide a foundation for the rational design and selection of seismic protection structures in different strain rate impact environments.展开更多
Dirac states composed of Px,y orbitals have been reported in many two-dimensional （2D） systems with honeycomb lattices recently. Their potential importance has aroused strong interest in a comprehensive understandin...Dirac states composed of Px,y orbitals have been reported in many two-dimensional （2D） systems with honeycomb lattices recently. Their potential importance has aroused strong interest in a comprehensive understanding of such states. Here, we construct a four-band tight-binding model for the Px,y-orbital Dirac states considering both the nearest neighbor hopping interactions and the lattice-buckling effect. We find that Px,y-orbital Dirac states are accompanied with two addi- tional narrow bands that are flat in the limit of vanishing n bonding, which is in agreement with previous studies. Most importantly, we analytically obtain the linear dispersion relationship between energy and momentum vector near the Dirac cone. We find that the Fermi velocity is determined not only by the hopping through n bonding but also by the hopping through ~ bonding of Px,y orbitals, which is in contrast to the case of pz-orbital Dirac states. Consequently, Px,y-orbital Dirac states offer more flexible engineering, with the Fermi velocity being more sensitive to the changes of lattice constants and buckling angles, if strain is exerted. We further validate our tight-binding scheme by direct first-principles calcula- tions of model-materials including hydrogenated monolayer Bi and Sb honeycomb lattices. Our work provides a more in-depth understanding of Px,y-orbital Dirac states in honeycomb lattices, which is useful for the applications of this family of materials in nanoelectronics.展开更多
The investigation of non-Fourier thermal shock fracture behavior in multicrack auxetic honeycomb structures(HSs) is presented. By employing a non-Fourier heat conduction model, the corresponding temperature and therma...The investigation of non-Fourier thermal shock fracture behavior in multicrack auxetic honeycomb structures(HSs) is presented. By employing a non-Fourier heat conduction model, the corresponding temperature and thermal stress fields are established. Subsequently, a thermal stress intensity factor(TSIF) model for the auxetic HSs,accounting for multi-crack interactions, is developed. Finally, using the fracture-based failure criterion, the non-Fourier multi-crack critical temperature of the auxetic HSs is determined. This investigation thoroughly examines the effects of the non-Fourier effect(NFE), auxetic property, crack spacing, and crack location on the thermal shock fracture behavior of the auxetic HSs. Results indicate that a stronger NFE leads to weaker thermal shock resistance in auxetic HSs. Regardless of the presence of the NFE, the auxetic property consistently increases the multi-crack critical temperature of the HSs.Additionally, the interaction of multi-crack inhibits thermal shock crack propagation in HSs.展开更多
The non-destructive testing of brazed joint in honeycomb structure with thin panel （ thickness ： 0. 2 mm） was studied by ultrasonic C-scan method. Samples with different types of artificial defect were designed; th...The non-destructive testing of brazed joint in honeycomb structure with thin panel （ thickness ： 0. 2 mm） was studied by ultrasonic C-scan method. Samples with different types of artificial defect were designed; the characteristic signal and the main parameters of the test were determined by the pre-experiment, and then parameters were optimized by orthogonal design, finally the optimum process was verified by a single panel sample. The multiple reflection echoes were chosen as the characteristic signal. The optimal C-scan results were achieved when the 20 MHz focus probe was used, and the pass band range for received signal were selected as 8 - 17. 5 MHz. The defects such as incomplete penetration and core damage can be detected with ultrasonic C-scan, and the detection accuracy can reach to 1 ram.展开更多
A flexible asymmetric supercapacitor with high energy density was constructed by using a flexible substrate of carbonized silk-fabrics decorated with carbon nanotube, electroplating MnO2 nanosheets and dip-coating act...A flexible asymmetric supercapacitor with high energy density was constructed by using a flexible substrate of carbonized silk-fabrics decorated with carbon nanotube, electroplating MnO2 nanosheets and dip-coating activated carbon powders as the positive and the negative electrodes, respectively. By controlling the electroplating time, the MnO2 nanosheets can be self-assembled to honeycomb structure and showed excellent electrochemical performance in 1 mol/L Na2SO4 electrolyte with SC950-EP30 performing the best. It exhibited a high specific capacitance（1110.85 F/g at a current density of 1 A/g based on the mass of MnO2） and superior rate capability（77.44% capacity retention from 1 A/g to 10 A/g）.Thus, the optimal asymmetric device assembled with this material as positive electrode can deliver a maximum energy density of 43.84 Wh/kg and a maximum power density of 6.62 kW/kg.展开更多
Femtosecond laser welding,a novel technique for material joining,faces challenges such as stringent pre-welding requirements and low joint strength when directly welding ceramics.In this study,we addressed the issues ...Femtosecond laser welding,a novel technique for material joining,faces challenges such as stringent pre-welding requirements and low joint strength when directly welding ceramics.In this study,we addressed the issues associated with the direct welding of yttria-stabilized zirconia(YSZ)and sapphire by first depositing a nanometer-thick Ti layer on the ceramic surface,followed by femtosecond laser welding.Notably,we observed for the first time that femtosecond laser pulses induced the formation of a honeycomb structure at the interface,forming a YSZ/sapphire micro-welding joint characterized by a continuous structure,a honeycomb structure,and Ti-rich phases.This specific joint distribution significantly enhanced the interface transition and improved the joint strength.Under conditions of 8 W laser power,scanning speed of 50 mm/s,and pulse frequency of 200 kHz,the micro-welding joint exhibited optimal interface performance,achieving a maximum shear strength of approximately 79 MPa.Through calculations of the temperature distribution of the interface and the surface energy of the crystal,we conclude that the honeycomb structure arises from the Ti layer,the temperature gradient distribution,and the tendency of sapphire to melt along directions with lower surface energy.The honeycomb structure effectively enriched the transition between the micro-welding interface and the substrate.The new findings of this study offer valuable insights and potential pathways for the reliable and efficient welding of advanced ceramics.展开更多
Using the method of elasticity, an analytical approach is developed to analyze the shear stress in a honeycomb wing structure with a large aspect ratio under the condition of free torsion. The formulas of shear stress...Using the method of elasticity, an analytical approach is developed to analyze the shear stress in a honeycomb wing structure with a large aspect ratio under the condition of free torsion. The formulas of shear stress, warping and angle of twist are derived. These formulas are both useful and convenient from the point of view in the structure design.展开更多
The development of heterogeneous acid catalysts with higher activity than homogeneous acid catalysts is critical and still challenging.In this study,acidic poly(ionic liquid)s with swelling ability(SAPILs)were designe...The development of heterogeneous acid catalysts with higher activity than homogeneous acid catalysts is critical and still challenging.In this study,acidic poly(ionic liquid)s with swelling ability(SAPILs)were designed and synthesized via the free radical copolymerization of ionic liquid monomers,sodium p-styrenesulfonate,and crosslinkers,followed by acidification.The 31P nuclear magnetic resonance chemical shifts of adsorbed trimethylphosphine oxide indicated that the synthesized SAPILs presented moderate and single acid strength.The thermogravimetric analysis results in the temperature range of 300–345°C revealed that the synthesized SAPILs were more stable than the commercial resin Amberlite IR-120(H)(245°C).Cryogenic scanning electron microscopy testing demonstrated that SAPILs presented unique three-dimensional(3D)honeycomb structure in water,which was ascribed to the swelling-induced self-assembly of the molecules.Moreover,we used SAPILs with micron-sized honeycomb structure in water as catalysts for the hydrolysis of cyclohexyl acetate to cyclohexanol,and determined that their catalytic activity was much higher than that of homogeneous acid catalysts.The equilibrium concentrations of all reaction components inside and outside the synthesized SAPILs were quantitatively analyzed using a series of simulated reaction mixtures.Depending on the reaction mixture,the concentration of cyclohexyl acetate inside SAPIL-1 was 7.5–23.3 times higher than that outside of it,which suggested the high enrichment ability of SAPILs for cyclohexyl acetate.The excellent catalytic performance of SAPILs was attributed to their 3D honeycomb structure in water and high enrichment ability for cyclohexyl acetate,which opened up new avenues for designing highly efficient heterogeneous acid catalysts that could eventually replace conventional homogeneous acid catalysts.展开更多
Materials that can efficiently absorb electromagnetic waves(EMWs)are required to deal with electromagnetic pollution.Structure design appears to be an efficient way to improve the EMW-absorption performance of such ma...Materials that can efficiently absorb electromagnetic waves(EMWs)are required to deal with electromagnetic pollution.Structure design appears to be an efficient way to improve the EMW-absorption performance of such materials,particularly when adjustment of the constitution or mixing ratio is limited.In this study,bowl-like and honeycomb titanium dioxide/carbon nanotube(TiO_(2)/CNT)composites with different CNT contents were fabricated using the methods of hierarchical and mixing vacuum-assisted filtration,respectively.Compared to the honeycomb structure,the bowl-like structure simultaneously facilitated greater interfacial polarization and conduction loss in favor of dielectric polarization,and augmented multiple reflections.The high porosity of the honeycomb structure was conducive to optimizing the impedance matching characteristics.The bowl-like TiO_(2)/CNT composite exhibited a minimum reflection loss(RL_(min))of-38.6 dB(1.5 mm)with a wide effective absorption band(EAB;<-10 dB)of4.2 GHz,while the honeycomb TiO_(2)/CNT composite showed an RLminof-34.8 dB(2.1 mm)with an EAB of 4.3 GHz.The required mixing ratio in the matrix was only 15 wt%,outperforming that of the most closely related composites.Thus,both the bowl-like and honeycomb TiO_(2)/CNT composites are ideal candidates for light-weight and highly efficient EMW-absorbing materials.展开更多
The spoke as a key component has a significant impact on the performance of the non-pneumatic tire(NPT).The current research has focused on adjusting spoke structures to improve the single performance of NPT.Few studi...The spoke as a key component has a significant impact on the performance of the non-pneumatic tire(NPT).The current research has focused on adjusting spoke structures to improve the single performance of NPT.Few studies have been conducted to synergistically improve multi-performance by optimizing the spoke structure.Inspired by the concept of functionally gradient structures,this paper introduces a functionally gradient honeycomb NPT and its optimization method.Firstly,this paper completes the parameterization of the honeycomb spoke structure and establishes the numerical models of honeycomb NPTs with seven different gradients.Subsequently,the accuracy of the numerical models is verified using experimental methods.Then,the static and dynamic characteristics of these gradient honeycomb NPTs are thoroughly examined by using the finite element method.The findings highlight that the gradient structure of NPT-3 has superior performance.Building upon this,the study investigates the effects of key parameters,such as honeycomb spoke thickness and length,on load-carrying capacity,honeycomb spoke stress and mass.Finally,a multi-objective optimization method is proposed that uses a response surface model(RSM)and the Nondominated Sorting Genetic Algorithm-II(NSGA-II)to further optimize the functional gradient honeycomb NPTs.The optimized NPT-OP shows a 23.48%reduction in radial stiffness,8.95%reduction in maximum spoke stress and 16.86%reduction in spoke mass compared to the initial NPT-1.The damping characteristics of the NPT-OP have also been improved.The results offer a theoretical foundation and technical methodology for the structural design and optimization of gradient honeycomb NPTs.展开更多
Biodegradable porous nanocomposite scaffolds of poly（lactide-co-glycolide）（PLGA） and L-lactic acid（LAc） oligomer surface-grafted hydroxyapatite nanoparticles（op-HA） with a honeycomb monolith structure were fab...Biodegradable porous nanocomposite scaffolds of poly（lactide-co-glycolide）（PLGA） and L-lactic acid（LAc） oligomer surface-grafted hydroxyapatite nanoparticles（op-HA） with a honeycomb monolith structure were fabricated with the single-phase solution freeze-drying method.The effects of different freezing temperatures on the properties of the scaffolds,such as microstructures,compressive strength,cell penetration and cell proliferation were studied.The highly porous and well interconnected scaffolds with a tunable pore structure were obtained.The effect of different freezing temperature（4℃,-20℃,-80℃and -196℃） was investigated in relation to the scaffold morphology,the porosity varied from 91.2%to 83.0%and the average pore diameter varied from（167.2±62.6）μm to（11.9±4.2）μm while theσ_（10） increased significantly.The cell proliferation were decreased and associated with the above-mentioned properties.Uniform distribution of op-HA particles and homogeneous roughness of pore wall surfaces were found in the 4℃frozen scaffold.The 4℃frozen scaffold exhibited better cell penetration and increased cell proliferation because of its larger pore size,higher porosity and interconnection.The microstructures described here provide a new approach for the design and fabrication of op-HA/PLGA based scaffold materials with potentially broad applicability for replacement of bone defects.展开更多
基金Project supported by the National Natural Science Foundation of China(Grant Nos.12074213 and 11574108)the National Key R&D Program of China(Grant No.2022YFA1403103)+2 种基金the Major Basic Program of Natural Science Foundation of Shandong Province(Grant No.ZR2021ZD01)the Natural Science Foundation of Shandong Province(Grant No.ZR2023MA082)the Project of Introduction and Cultivation for Young Innovative Talents in Colleges and Universities of Shandong Province。
文摘Two-dimensional double-layer honeycomb(DLHC)materials are known for their diverse physical properties,but superconductivity has been a notably absent characteristic in this structure.We address this gap by investigating M_(2)N_(2)(M=Nb,Ta)with DLHC structure using first-principles calculations.Our results show that M_(2)N_(2)are stable and metallic,exhibiting superconducting behavior.Specifically,Nb_(2)N_(2)and Ta_(2)N_(2)display superconducting transition temperatures of 6.8 K and 8.8 K,respectively.Their electron-phonon coupling is predominantly driven by the coupling between metal d-orbitals and low-frequency metal-dominated vibration modes.Interestingly,two compounds also exhibit non-trivial band topology.Thus,M_(2)N_(2)are promising platforms for studying the interplay between topology and superconductivity and fill the gap in superconductivity research for DLHC materials.
基金support and funding from the National Natural Science Foundation of China(Nos.52303104,52203100 and 52403132)Young Talent Fund of Association for Science and Technology in Shaanxi,China(No.20240455)+4 种基金Basic Research Program of Natural Science of Shaanxi Province(No.2024JCYBMS-275)Natural Science Foundation of Chongqing,China(No.2023NSCQ-MSX2682)the Doctoral Research Start-up Funds of Xi’an University of Technology(No.108/451122007)Innovation Foundation for Doctor Dissertation of Northwestern Polytechnical University(No.CX2024094)the Transformation Projects of Scientific and Technological Achievements of Qinchuangyuan Platform(2023JH-QCYCK-0026).
文摘With the rapid development of 5G communication technology and wearable electronic devices,the demand for low-reflection electromagnetic interference(EMI)shielding materials is becoming increasingly urgent.In this work,reduced graphene oxide-MXene(rGMH)@FeNi/epoxy EMI shielding composites with a regular honeycomb structure were successfully prepared by the combination of surface functionalization modification,sacrificial template,and freeze-drying.The effects of magnetic FeNi alloy particle loading mode and loading amount on the EMI shielding performance of composites were investigated.The results show that rGMH@FeNi/epoxy EMI shielding composites have the highest EMI shielding effectiveness(EMI SE)and the lowest reflection shielding effectiveness when magnetic FeNi alloy particles are loaded only on the graphene skeleton.In this composite,the EMI SE value of the composite is 61 dB when the rGMH@FeNi mass fraction is 5.4 wt%(f-FeNi mass fraction is 0.9 wt%),which is 4.7 times that of the blended rGO/MXene/FeNi/epoxy resin composite(13 dB)with the same mass fraction.At the same time,the rGMH@FeNi/epoxy composite has excellent thermal stability(heat-resistance index of 190.3℃)and mechanical properties(energy storage modulus of 8606.7 MPa).These polymer-based EMI shielding composites with excellent EMI shielding properties and low reflection effectiveness have great potential in the protection of high-power,portable and wearable electronic devices against electromagnetic pollution.
基金supports from the National Natural Science Foundation of China(U21A2093 and 51903145)Natural Science Basic Research Plan for Distinguished Young Scholars in Shaanxi Province of China(2019JC-11)and Fundamental Research Funds for the Central Universities(D5000210627)This work is also financially supported by Polymer Electromagnetic Functional Materials Innovation Team of Shaanxi Sanqin Scholars.
文摘With the rapid development of fifth-generation mobile com-munication technology and wearable electronic devices,electromagnetic interference and radiation pollution caused by electromagnetic waves have attracted worldwide attention.Therefore,the design and development of highly efficient EMI shielding materials are of great importance.In this work,the three-dimensional graphene oxide(GO)with regular honeycomb structure(GH)is firstly constructed by sacrificial template and freeze-dry-ing methods.Then,the amino functionalized FeNi alloy particles(f-FeNi)are loaded on the GH skeleton followed by in-situ reduction to prepare rGH@FeNi aerogel.Finally,the rGH@FeNi/epoxy EMI shielding com-posites with regular honeycomb structure is obtained by vacuum-assisted impregnation of epoxy resin.Benefitting from the construction of regular honeycomb structure and electromagnetic synergistic effect,the rGH@FeNi/epoxy composites with a low rGH@FeNi mass fraction of 2.1 wt%(rGH and f-FeNi are 1.2 and 0.9 wt%,respectively)exhibit a high EMI shielding effectiveness(EMI SE)of 46 dB,which is 5.8 times of that(8 dB)for rGO/FeNi/epoxy composites with the same rGO/FeNi mass fraction.At the same time,the rGH@FeNi/epoxy composites also possess excellent thermal stability(heat-resistance index and temperature at the maximum decomposition rate are 179.1 and 389.0°C respectively)and mechanical properties(storage modulus is 8296.2 MPa).
基金Project supported by the National Basic Research Program of China(No.2011CB610300)the National Natural Science Foundation of China(Nos.11172239 and 11372252)+3 种基金the Doctoral Program Foundation of Education Ministry of China(No.20126102110023)the Fundamental Research Funds for the Central Universities(Nos.310201401JCQ01001 and 3102015ZY036)China Postdoctoral Science Foundation(No.2013M540724)Shaanxi postdoctoral research projects
文摘Wave propagation in two-dimensional hierarchical honeycomb structures with two- order hierarchy is investigated by using the symplectic algorithm. By applying the variational prin- ciple to the dual variables, the wave propagation problem is transformed into a two-dimensional symplectie eigenvalue problem. The band gaps and spatial filtering phenomena are examined to find the stop bands and directional stop bands. Special attention is directed to the effects of the relative density and the length ratio on the band gaps and phase constant surfaces. This work provides new opportunities for designing hierarchical honeycomb structures in sound insulation applications.
基金the National Natural Science Foundation of China for the support(No.51175101)on this paper。
文摘Thermal infrared camouflage technology has attracted increasing attention with the progress of infrared surveillance technologies.Inspired by honeycombs,a thermal infrared camouflage film with honeycomb sandwich structure based on fluid and temperature control is proposed to cloak objects and display false targets in the thermal infrared spectrum.The structure and manufacturing method of the film are introduced,and the fluid and temperature control system is established and tested to explore the thermal infrared characteristics of the film composed of different thermal units.The camouflage performance of the film is intuitively displayed through the temperature frequency histograms of the infrared images photographed by an infrared camera.The temperature control accuracy of the thermal infrared camouflage system and the dynamic camouflage response of the film are evaluated by the temperature distribution map of each pixel in infrared images and the salient degree values.Furthermore,the influential factors on the camouflage responding time are investigated,including the heating and cooling time of the liquid,the flow rate of pumps inside the driving module,and the energy loss along the liquid lines.An application of displaying false target is also introduced and tested.The results show that the camouflage film has a well camouflage effect and a wide adjustment temperature range,showing promise for a broad range of potential applications,such as counter-surveillance,thermal control and heat shielding.
基金supported by the National Natural Science Foundation of China(Grant No.51874041)the National Outstanding Youth Science Fund Project of National Natural Science Foundation of China(Grant No.52202012)。
文摘High-speed impact threats and terrorist actions on the battlefield require the development of more effective protective materials and structures,and various protective structure is designed according their energy-absorbing characteristics.In this research,the deformation behavior,microscopic failure modes and energy absorption characteristics of re-entrant hexagonal structure,regular hexagonal structure and regular quadrilateral structure are studied under different strain rates impact.The re-entrant hexagonal structure forms a“X”-shaped deformation zone,the regular quadrilateral and regular hexagonal structure form an“I”-shaped deformation zone.The microscopic appearance of the section is a mixed fracture form.The effects of the topological shape,cell angle,and cell height on the impact behavior of the structure were evaluated.When the cell height is fixed and the cell angle is changed,the energy absorption of the structure increase and then decrease as the relative density increase.The mechanical properties of the structure are optimal when the relative density is about 18.6%and the cell angle is22.5°.When the cell angle is fixed and the cell height is changed,as the relative density increases,the energy absorption of the structure gradually increases.The regular quadrilateral structure and the reentrant hexagonal structure experienced clear strain rate effects under dynamic impact conditions;the regular hexagonal structure did not exhibit obvious strain rate effects.The results presented herein provide a basis for further rational design and selection of shock-resistant protective structures that perform well in high-speed impact environments.
文摘The novelty of this research lies in the successful fabrication of a 3D-printed honeycomb structure filled with nanofillers for acoustic properties,utilizing an impedance tube setup in accordance with ASTM standard E 1050-12.The Creality Ender-3,a 3D printer,was used for printing the honeycomb structures,and polylactic acid(PLA)material was employed for their construction.The organic,inorganic,and polymeric compounds within the composites were identified using fourier transformation infrared(FTIR)spectroscopy.The structure and homogeneity of the samples were examined using a field emission scanning electron microscope(FESEM).To determine the sound absorption coefficient of the 3D printed honeycomb structure,numerous samples were systematically developed using central composite design(CCD)and analysed using response surface methodology(RSM).The RSM mathematical model was established to predict the optimum values of each factor and noise reduction coefficient(NRC).The optimum values for an NRC of 0.377 were found to be 1.116 wt% carbon black,1.025 wt% aluminium powder,and 3.151 mm distance between parallel edges.Overall,the results demonstrate that a 3Dprinted honeycomb structure filled with nanofillers is an excellent material that can be utilized in various fields,including defence and aviation,where lightweight and acoustic properties are of great importance.
基金financially supported by the National Natural Science Foundation of China(51972049,52073010,and 52373259)the Projects of the Science and Technology Department of Jilin Province(20230201132GX)the Projects of the Education Department of Jilin Province(JJKH20220123KJ)。
文摘The impedance matching of absorbers is a vital factor affecting their microwave absorption(MA)properties.In this work,we controllably synthesized Material of Institute Lavoisier 88C(MIL-88C)with varying aspect ratios(AR)as a precursor by regulating oil bath conditions,followed by one-step thermal decomposition to obtain carbon-coated iron-based composites.Modifying the precursor MIL-88C(Fe)preparation conditions,such as the molar ratio between metal ions and organic ligands(M/O),oil bath temperature,and oil bath time,influenced the phases,graphitization degree,and AR of the derivatives,enabling low filler loading,achieving well-matched impedance,and ensuring outstanding MA properties.The MOF-derivatives 2(MD_(2))/polyvinylidene Difluoride(PVDF),MD_(3)/PVDF,and MD4/PVDF absorbers all exhibited excellent MA properties with optimal filler loadings below 20 wt%and as low as 5 wt%.The MD_(2)/PVDF(5 wt%)achieved a maximum effective absorption bandwidth(EAB)of 5.52 GHz(1.90 mm).The MD_(3)/PVDF(10 wt%)possessed a minimum reflection loss(RL_(min))value of−67.4 at 12.56 GHz(2.13 mm).A symmetric gradient honeycomb structure(SGHS)was constructed utilizing the high-frequency structure simulator(HFSS)to further extend the EAB,achieving an EAB of 14.6 GHz and a RL_(min) of−59.0 dB.This research offers a viable inspiration to creating structures or materials with high-efficiency MA properties.
基金This work is supported by the State Key for Strength and Vibration of Mechanical Structures of Xi’an Jiaotong University(No.SV2018-KF-32)the Natural Science Foundation of Guangdong Province of China(2020A1515011064).
文摘Based on the symmetric re-entrant honeycomb(S-RH)structure with negative Poisson’s ratios,a novel asymmetric and rotatable re-entrant honeycomb(AR-RH)structure was proposed.Both the S-RH structure and AR-RH structure were produced by the 3D printing technology.Through experimental test and finite element simulation,the deformation mechanism and energy absorption characteristics of the AR-RH structure and the S-RH structure with negative Poisson’s ratios at different impact velocities were compared.The experimental test and finite element simulation results show that the novel AR-RH structure with negative Poisson’s ratios has stronger energy absorption capacity than the S-RH structure,and it has been verified that the rotatability of AR-RH can indeed absorb energy.Furthermore,the degree of asymmetry of the AR-RH structure was discussed.
基金financially supported by National Natural Science Foundation of China,China (Grant No.52022012)National Key R&D Program for Young Scientists of China,China (Grant No.2022YFC3080900)。
文摘The high variability of shock in terrorist attacks poses a threat to people's lives and properties,necessitating the development of more effective protective structures.This study focuses on the angle gradient and proposes four different configurations of concave hexagonal honeycomb structures.The structures'macroscopic deformation behavior,stress-strain relationship,and energy dissipation characteristics are evaluated through quasi-static compression and Hopkinson pressure bar impact experiments.The study reveals that,under varying strain rates,the structures deform starting from the weak layer and exhibit significant interlayer separation.Additionally,interlayer shear slip becomes more pronounced with increasing strain rate.In terms of quasi-static compression,symmetric gradient structures demonstrate superior energy absorption,particularly the symmetric negative gradient structure(SNG-SMS)with a specific energy absorption of 13.77 J/cm~3.For dynamic impact,unidirectional gradient structures exhibit exceptional energy absorption,particularly the unidirectional positive gradient honeycomb structure(UPG-SML)with outstanding mechanical properties.The angle gradient design plays a crucial role in determining the structure's stability and deformation mode during impact.Fewer interlayer separations result in a more pronounced negative Poisson's ratio effect and enhance the structure's energy absorption capacity.These findings provide a foundation for the rational design and selection of seismic protection structures in different strain rate impact environments.
基金Project supported by the National Key Research and Development Projects of China(Grant No.2016YFA0202300)the National Natural Science Foundation of China(Grant No.61390501)+1 种基金the Science Fund from the Chinese Academy of Sciences(Grant No.XDPB0601)the US Army Research Office
文摘Dirac states composed of Px,y orbitals have been reported in many two-dimensional （2D） systems with honeycomb lattices recently. Their potential importance has aroused strong interest in a comprehensive understanding of such states. Here, we construct a four-band tight-binding model for the Px,y-orbital Dirac states considering both the nearest neighbor hopping interactions and the lattice-buckling effect. We find that Px,y-orbital Dirac states are accompanied with two addi- tional narrow bands that are flat in the limit of vanishing n bonding, which is in agreement with previous studies. Most importantly, we analytically obtain the linear dispersion relationship between energy and momentum vector near the Dirac cone. We find that the Fermi velocity is determined not only by the hopping through n bonding but also by the hopping through ~ bonding of Px,y orbitals, which is in contrast to the case of pz-orbital Dirac states. Consequently, Px,y-orbital Dirac states offer more flexible engineering, with the Fermi velocity being more sensitive to the changes of lattice constants and buckling angles, if strain is exerted. We further validate our tight-binding scheme by direct first-principles calcula- tions of model-materials including hydrogenated monolayer Bi and Sb honeycomb lattices. Our work provides a more in-depth understanding of Px,y-orbital Dirac states in honeycomb lattices, which is useful for the applications of this family of materials in nanoelectronics.
基金Project supported by the Basic and Applied Research Project from the National Natural Science Foundation of Guangdong Province of China (No. 2023A1515012641)。
文摘The investigation of non-Fourier thermal shock fracture behavior in multicrack auxetic honeycomb structures(HSs) is presented. By employing a non-Fourier heat conduction model, the corresponding temperature and thermal stress fields are established. Subsequently, a thermal stress intensity factor(TSIF) model for the auxetic HSs,accounting for multi-crack interactions, is developed. Finally, using the fracture-based failure criterion, the non-Fourier multi-crack critical temperature of the auxetic HSs is determined. This investigation thoroughly examines the effects of the non-Fourier effect(NFE), auxetic property, crack spacing, and crack location on the thermal shock fracture behavior of the auxetic HSs. Results indicate that a stronger NFE leads to weaker thermal shock resistance in auxetic HSs. Regardless of the presence of the NFE, the auxetic property consistently increases the multi-crack critical temperature of the HSs.Additionally, the interaction of multi-crack inhibits thermal shock crack propagation in HSs.
文摘The non-destructive testing of brazed joint in honeycomb structure with thin panel （ thickness ： 0. 2 mm） was studied by ultrasonic C-scan method. Samples with different types of artificial defect were designed; the characteristic signal and the main parameters of the test were determined by the pre-experiment, and then parameters were optimized by orthogonal design, finally the optimum process was verified by a single panel sample. The multiple reflection echoes were chosen as the characteristic signal. The optimal C-scan results were achieved when the 20 MHz focus probe was used, and the pass band range for received signal were selected as 8 - 17. 5 MHz. The defects such as incomplete penetration and core damage can be detected with ultrasonic C-scan, and the detection accuracy can reach to 1 ram.
基金financially supported by the National Natural Science Foundation of China(No.51672151)973 Program of China(No.2014CB932401)
文摘A flexible asymmetric supercapacitor with high energy density was constructed by using a flexible substrate of carbonized silk-fabrics decorated with carbon nanotube, electroplating MnO2 nanosheets and dip-coating activated carbon powders as the positive and the negative electrodes, respectively. By controlling the electroplating time, the MnO2 nanosheets can be self-assembled to honeycomb structure and showed excellent electrochemical performance in 1 mol/L Na2SO4 electrolyte with SC950-EP30 performing the best. It exhibited a high specific capacitance（1110.85 F/g at a current density of 1 A/g based on the mass of MnO2） and superior rate capability（77.44% capacity retention from 1 A/g to 10 A/g）.Thus, the optimal asymmetric device assembled with this material as positive electrode can deliver a maximum energy density of 43.84 Wh/kg and a maximum power density of 6.62 kW/kg.
基金supported by the National Natural Science Foundation of China(No.52275301)the Beijing Nova Program(No.20230484311)the Beijing Natural Science Foundation(No.3242002).
文摘Femtosecond laser welding,a novel technique for material joining,faces challenges such as stringent pre-welding requirements and low joint strength when directly welding ceramics.In this study,we addressed the issues associated with the direct welding of yttria-stabilized zirconia(YSZ)and sapphire by first depositing a nanometer-thick Ti layer on the ceramic surface,followed by femtosecond laser welding.Notably,we observed for the first time that femtosecond laser pulses induced the formation of a honeycomb structure at the interface,forming a YSZ/sapphire micro-welding joint characterized by a continuous structure,a honeycomb structure,and Ti-rich phases.This specific joint distribution significantly enhanced the interface transition and improved the joint strength.Under conditions of 8 W laser power,scanning speed of 50 mm/s,and pulse frequency of 200 kHz,the micro-welding joint exhibited optimal interface performance,achieving a maximum shear strength of approximately 79 MPa.Through calculations of the temperature distribution of the interface and the surface energy of the crystal,we conclude that the honeycomb structure arises from the Ti layer,the temperature gradient distribution,and the tendency of sapphire to melt along directions with lower surface energy.The honeycomb structure effectively enriched the transition between the micro-welding interface and the substrate.The new findings of this study offer valuable insights and potential pathways for the reliable and efficient welding of advanced ceramics.
文摘Using the method of elasticity, an analytical approach is developed to analyze the shear stress in a honeycomb wing structure with a large aspect ratio under the condition of free torsion. The formulas of shear stress, warping and angle of twist are derived. These formulas are both useful and convenient from the point of view in the structure design.
文摘The development of heterogeneous acid catalysts with higher activity than homogeneous acid catalysts is critical and still challenging.In this study,acidic poly(ionic liquid)s with swelling ability(SAPILs)were designed and synthesized via the free radical copolymerization of ionic liquid monomers,sodium p-styrenesulfonate,and crosslinkers,followed by acidification.The 31P nuclear magnetic resonance chemical shifts of adsorbed trimethylphosphine oxide indicated that the synthesized SAPILs presented moderate and single acid strength.The thermogravimetric analysis results in the temperature range of 300–345°C revealed that the synthesized SAPILs were more stable than the commercial resin Amberlite IR-120(H)(245°C).Cryogenic scanning electron microscopy testing demonstrated that SAPILs presented unique three-dimensional(3D)honeycomb structure in water,which was ascribed to the swelling-induced self-assembly of the molecules.Moreover,we used SAPILs with micron-sized honeycomb structure in water as catalysts for the hydrolysis of cyclohexyl acetate to cyclohexanol,and determined that their catalytic activity was much higher than that of homogeneous acid catalysts.The equilibrium concentrations of all reaction components inside and outside the synthesized SAPILs were quantitatively analyzed using a series of simulated reaction mixtures.Depending on the reaction mixture,the concentration of cyclohexyl acetate inside SAPIL-1 was 7.5–23.3 times higher than that outside of it,which suggested the high enrichment ability of SAPILs for cyclohexyl acetate.The excellent catalytic performance of SAPILs was attributed to their 3D honeycomb structure in water and high enrichment ability for cyclohexyl acetate,which opened up new avenues for designing highly efficient heterogeneous acid catalysts that could eventually replace conventional homogeneous acid catalysts.
基金financially supported by the National Natural Science Foundation of China(No.51802289)the Science Foundation for the Excellent Youth Scholars of Henan Province(No.212300410089)+2 种基金the Support Program for Scientific and Technological Innovation Talents of Higher Education in Henan Province(No.21HASTIT004)the China Postdoctoral Science Foundation(No.2019M661352)the Natural Science Basic Research Program in Shaanxi Province(No.202032100067)。
文摘Materials that can efficiently absorb electromagnetic waves(EMWs)are required to deal with electromagnetic pollution.Structure design appears to be an efficient way to improve the EMW-absorption performance of such materials,particularly when adjustment of the constitution or mixing ratio is limited.In this study,bowl-like and honeycomb titanium dioxide/carbon nanotube(TiO_(2)/CNT)composites with different CNT contents were fabricated using the methods of hierarchical and mixing vacuum-assisted filtration,respectively.Compared to the honeycomb structure,the bowl-like structure simultaneously facilitated greater interfacial polarization and conduction loss in favor of dielectric polarization,and augmented multiple reflections.The high porosity of the honeycomb structure was conducive to optimizing the impedance matching characteristics.The bowl-like TiO_(2)/CNT composite exhibited a minimum reflection loss(RL_(min))of-38.6 dB(1.5 mm)with a wide effective absorption band(EAB;<-10 dB)of4.2 GHz,while the honeycomb TiO_(2)/CNT composite showed an RLminof-34.8 dB(2.1 mm)with an EAB of 4.3 GHz.The required mixing ratio in the matrix was only 15 wt%,outperforming that of the most closely related composites.Thus,both the bowl-like and honeycomb TiO_(2)/CNT composites are ideal candidates for light-weight and highly efficient EMW-absorbing materials.
基金Supported by National Natural Science Foundation of China(Grant Nos.52072156,52272366)Postdoctoral Foundation of China(Grant No.2020M682269).
文摘The spoke as a key component has a significant impact on the performance of the non-pneumatic tire(NPT).The current research has focused on adjusting spoke structures to improve the single performance of NPT.Few studies have been conducted to synergistically improve multi-performance by optimizing the spoke structure.Inspired by the concept of functionally gradient structures,this paper introduces a functionally gradient honeycomb NPT and its optimization method.Firstly,this paper completes the parameterization of the honeycomb spoke structure and establishes the numerical models of honeycomb NPTs with seven different gradients.Subsequently,the accuracy of the numerical models is verified using experimental methods.Then,the static and dynamic characteristics of these gradient honeycomb NPTs are thoroughly examined by using the finite element method.The findings highlight that the gradient structure of NPT-3 has superior performance.Building upon this,the study investigates the effects of key parameters,such as honeycomb spoke thickness and length,on load-carrying capacity,honeycomb spoke stress and mass.Finally,a multi-objective optimization method is proposed that uses a response surface model(RSM)and the Nondominated Sorting Genetic Algorithm-II(NSGA-II)to further optimize the functional gradient honeycomb NPTs.The optimized NPT-OP shows a 23.48%reduction in radial stiffness,8.95%reduction in maximum spoke stress and 16.86%reduction in spoke mass compared to the initial NPT-1.The damping characteristics of the NPT-OP have also been improved.The results offer a theoretical foundation and technical methodology for the structural design and optimization of gradient honeycomb NPTs.
基金supported by the National Natural Science Foundation of China(Nos.30772209,50973109 and key project 50733003)the"863"(No.2007AA03Z320) from the Ministry of Science and Technology of ChinaMajor Project of International cooperation from the Ministry of Science and Technology of China(No.20071314)
文摘Biodegradable porous nanocomposite scaffolds of poly（lactide-co-glycolide）（PLGA） and L-lactic acid（LAc） oligomer surface-grafted hydroxyapatite nanoparticles（op-HA） with a honeycomb monolith structure were fabricated with the single-phase solution freeze-drying method.The effects of different freezing temperatures on the properties of the scaffolds,such as microstructures,compressive strength,cell penetration and cell proliferation were studied.The highly porous and well interconnected scaffolds with a tunable pore structure were obtained.The effect of different freezing temperature（4℃,-20℃,-80℃and -196℃） was investigated in relation to the scaffold morphology,the porosity varied from 91.2%to 83.0%and the average pore diameter varied from（167.2±62.6）μm to（11.9±4.2）μm while theσ_（10） increased significantly.The cell proliferation were decreased and associated with the above-mentioned properties.Uniform distribution of op-HA particles and homogeneous roughness of pore wall surfaces were found in the 4℃frozen scaffold.The 4℃frozen scaffold exhibited better cell penetration and increased cell proliferation because of its larger pore size,higher porosity and interconnection.The microstructures described here provide a new approach for the design and fabrication of op-HA/PLGA based scaffold materials with potentially broad applicability for replacement of bone defects.
