[Objectives]To investigate the effects of different planting densities and nitrogen application rates on the yield and quality of the tobacco cultivar Chuxue 80.[Methods]A field experiment was conducted in Hubei Provi...[Objectives]To investigate the effects of different planting densities and nitrogen application rates on the yield and quality of the tobacco cultivar Chuxue 80.[Methods]A field experiment was conducted in Hubei Province,evaluating various combinations of planting density and nitrogen rate for Chuxue 80.[Results]At the maturity stage,the TN1 treatment(5 kg N per 667 m^(2) with a density of 1900 plants per 667 m^(2))demonstrated the most favorable agronomic performance.The TN9 treatment(11 kg N per 667 m^(2) with a density of 1110 plants per 667 m^(2))achieved the highest wrapper tobacco yield and output value.Meanwhile,the TN5 treatment(8 kg N per 667 m^(2) with a density of 1515 plants per 667 m^(2))resulted in the best smoking quality.[Conclusions]The TN9 treatment,with a planting density of 1110 plants per 667 m^(2) and a nitrogen application rate of 11 kg per 667 m^(2),is recommended as the optimal cultivation practice for Chuxue 80 in Hubei Province.展开更多
Although traditional gamma-gamma density(GGD)logging technology is widely utilized,its potential environmental risks have prompted the development of more environmentally friendly neutron-gamma density(NGD)logging tec...Although traditional gamma-gamma density(GGD)logging technology is widely utilized,its potential environmental risks have prompted the development of more environmentally friendly neutron-gamma density(NGD)logging technology.However,NGD measurements are influenced by both neutron and gamma radiations.In the logging environment,variations in the formation composition indicate different elemental compositions,which affect the neutron-gamma reaction cross-sections and gamma generation.Compared to traditional gamma sources such as Cs-137,these changes significantly affect the generation and transport of neutron-induced inelastic gamma rays and hinder accurate measurements.To address this,a novel method is proposed that incorporates the mass attenuation coefficient function to account for the effects of various lithologies and pore contents on gamma-ray attenuation,thereby achieving more accurate density measurements by clarifying the transport processes of inelastic gamma rays with varying energies and spatial distributions in varied logging environments.The proposed method avoids the complex correction of neutron transport and is verified through Monte Carlo simulations for its applicability across various lithologies and pore contents,demonstrating absolute density errors that are less than 0.02 g/cm^(3)in clean formations and indicating good accuracy.This study clarifies the NGD mechanism and provides theoretical guidance for the application of NGD logging methods.Further studies will be conducted on extreme environmental conditions and tool calibration.展开更多
Atomic spin gyroscopes are promising candidates for next-generation inertial navigation due to extremely high theoretical precision,relatively small size among atomic gyroscopes,and promising potential for miniaturiza...Atomic spin gyroscopes are promising candidates for next-generation inertial navigation due to extremely high theoretical precision,relatively small size among atomic gyroscopes,and promising potential for miniaturization.In particular,the spin-exchange relaxation-free(SERF)atomic gyroscope relies on optical pumping to polarize atoms,enabling rotation sensing through the Faraday optical rotation angle(FORA).However,fluctuations in atomic density introduce systematic errors in FORA measurements,limiting long-term stability.We present a data-driven decoupling method that isolates atomic density fluctuations from the FORA signal by modeling spatially resolved light absorption in the vapor cell.The model accounts for the spatial distribution of spin polarization in the pump-light interaction volume,density-dependent relaxation rates,wall-induced relaxation,and polarization diffusion,and is implemented within a finite-element framework.Compared to the conventional Lambert-Beer law,which assumes one-dimensional homogeneity,our approach captures the full threedimensional density and polarization distribution,significantly improving the accuracy of light absorption modeling.The resulting absorption-density maps are used to train a feedforward neural network,yielding a high-precision estimator for atomic density fluctuations.This estimator enables the construction of a decoupling equation that separates the density contribution from the FORA signal.Experimental validation shows that this method improves the bias instability atσ(100 s)of the gyroscope was improved by 73.1%compared to traditional platinum-resistance-based stabilization.The proposed framework is general and can be extended to other optical pumping-based sensors,such as optically pumped magnetometers.展开更多
Insight into the carbon turnover in soil aggregates and density fractions is essential for reducing the uncertainty in estimating carbon pools on the Tibetan Plateau,and how they vary with land use type is unclear.In ...Insight into the carbon turnover in soil aggregates and density fractions is essential for reducing the uncertainty in estimating carbon pools on the Tibetan Plateau,and how they vary with land use type is unclear.In this study,the effect of land use type on carbon storage and fractionation was quantified based on organic carbon and its ^(13)C abundance at the microscale of soil aggregates and density fractions in Tibetan alpine ecosystems.The sequence of soil aggregate destruction in the land use types of plantation(13.1%)<shrubland(32.7%)<grassland(47.9%)<farmland(61.8%)shows that plantations strengthen the soil structure.Plantation land had a greater contribution of light fraction organic carbon(28.3%)but a lower contribution of mineral-associated organic carbon(40.6%)to the carbon stock compared to farmland(13.5 and 70.3%).Interestingly,plantation land enhanced the aggregational differentiation of organic carbon and ^(13)C in each density fraction,whereas no such phenomenon existed in the soil organic carbon.Carbon isotope analyses revealed that carbon transfer in the plantation land occurred from the light fraction in macroaggregates(–24.9‰)to the mineral-associated fraction in microaggregates(–19.9‰).When compared to the other three land use types,the low transferability of carbon in aggregates and density fractions in plantation land provides a stable carbon pool for the Tibetan Plateau.This study shows that plantations can mitigate global climate change by slowing carbon transfer and increasing carbon storage at the microscale of aggregates and density fractions in alpine regions.展开更多
In this study,we analyze the impact of the May 2024 geomagnetic storm on the thermospheric mass density by using TianMu-1 constellation satellite(TM02,TM06,TM07,TM11,TM15)observations.These observations reveal intense...In this study,we analyze the impact of the May 2024 geomagnetic storm on the thermospheric mass density by using TianMu-1 constellation satellite(TM02,TM06,TM07,TM11,TM15)observations.These observations reveal intense large-scale traveling atmospheric disturbances(TADs)originating at high latitudes and propagating equatorward.Observations by TM02 captured the evolution of a TAD structure:An initial amplitude of~3.89×10^(-12)kg/m^(3)at hundred-kilometer scale subsequently intensified to 4.78×10^(-12)kg/m^(3),with the spatial extent expanding to the thousand-kilometer level.Significant hemispheric asymmetry was observed:the absolute density was higher predominantly in the northern hemisphere(TM02,TM06,TM07,TM11),whereas the difference in the relative density consistently showed greater enhancements in the southern hemisphere across all satellites,with the maximum north-south density differences exceeding 195%-640%above 60°latitude.In conjunction with SuperDARN(Super Dual Auroral Radar Network)observations,this striking hemispheric asymmetry can likely be attributed to disparities in plasma convection patterns between the two hemispheres.Furthermore,density perturbation characteristics exhibited strong local time(LT)dependence:Near noon(~10.7 LT,TM02 descending),the northern hemisphere onset preceded the southern onset.Conversely,near dusk(~17.6 LT,TM15 descending),the southern onset led the northern onset by approximately 3 hours.Ascending orbits(TM02,TM06,TM07,TM15)typically yielded larger global density enhancements compared with smaller southern-confined enhancements during descending orbits.Satellite TM11 showed comparable perturbations in both ascending and descending orbits.By leveraging its unique orbital architecture,the TianMu-1 constellation enables global near-simultaneous multi-LT sampling,providing a robust data foundation for both scientific research and engineering applications.展开更多
Coordinating light and nitrogen(N)distribution within a canopy is essential for improving rice yield and resource use efficiency.However,limited research has examined light and N distribution in response to planting d...Coordinating light and nitrogen(N)distribution within a canopy is essential for improving rice yield and resource use efficiency.However,limited research has examined light and N distribution in response to planting density and N rate,and their relationships with grain yield,radiation use efficiency(RUE),and N use efficiency for grain production(NUEg)in rice.A two-year field experiment was conducted with two hybrid varieties under three N levels,0 kg ha^(-1)(N1),90 kg ha^(-1)(N2)and 180 kg ha^(-1)(N3),and two planting densities,22.2 hills m-2(D1)and 33.3 hills m^(-2)(D2).Results showed 3.4%higher yield and 4.4%higher NUEg under N2D2 compared with N3D1.The extinction coefficient for N(K_(N))and light(K_(L))and their ratio(K_(N)/K_(L))at heading stage were significantly influenced by N rate,planting density,and their interaction.K_(N)decreased with the increase of N input or planting density.Compared to N1,K_(N)decreased by 43.5 and 58.8%under N2 and N3,respectively,while K_(N)under D2 decreased by 16.0%compared to D1.Higher K_(L)and K_(N)/K_(L)values occurred under low N rates,with opposite trends under high N rates.Increased planting density led to decreased K_(L)and K_(N)/K_(L)values.N2D2 demonstrated higher K_(L)and K_(N),and thus comparable K_(N)/K_(L),compared to N3D1.Correlation analysis revealed K_(L)negatively correlated with RUE,while K_(N)and K_(N)/K_(L)positively correlated with NUEg.These findings indicate that increasing planting density under reduced N input could maintain rice yield while enhancing resource use efficiency through regulation of canopy light and N distribution.展开更多
Understanding the complex plasma dynamics in ultra-intense relativistic laser-solid interactions is of fundamental importance for applications of laser-plasma-based particle accelerators,the creation of high-energy-de...Understanding the complex plasma dynamics in ultra-intense relativistic laser-solid interactions is of fundamental importance for applications of laser-plasma-based particle accelerators,the creation of high-energy-density matter,understanding planetary science,and laser-driven fusion energy.However,experimental efforts in this regime have been limited by the lack of accessibility of over-critical densities and the poor spatiotemporal resolution of conventional diagnostics.Over the last decade,the advent of femtosecond brilliant hard X-ray free-electron lasers(XFELs)has opened new horizons to overcome these limitations.Here,for the first time,we present full-scale spatiotemporal measurements of solid-density plasma dynamics,including preplasma generation with tens of nanometer scale length driven by the leading edge of a relativistic laser pulse,ultrafast heating and ionization at the main pulse arrival,the laser-driven blast wave,and transient surface return current-induced compression dynamics up to hundreds of picoseconds after interaction.These observations are enabled by utilizing a novel combination of advanced X-ray diagnostics including small-angle X-ray scattering,resonant X-ray emission spectroscopy,and propagation-based X-ray phase-contrast imaging simultaneously at the European XFEL-HED beamline station.展开更多
In this study,a microscopic method for calculating the nuclear level density(NLD)based on the covariant density functional theory(CDFT)is developed.The particle-hole state density is calculated by a combinatorial meth...In this study,a microscopic method for calculating the nuclear level density(NLD)based on the covariant density functional theory(CDFT)is developed.The particle-hole state density is calculated by a combinatorial method using single-particle level schemes obtained from the CDFT,and the level densities are then obtained by considering collective effects such as vibration and rotation.Our results are compared with those of other NLD models,including phenomenological,microstatisti-cal and nonrelativistic Hartree–Fock–Bogoliubov combinatorial models.This comparison suggests that the general trends among these models are essentially the same,except for some deviations among the different NLD models.In addition,the NLDs obtained using the CDFT combinatorial method with normalization are compared with experimental data,including the observed cumulative number of levels at low excitation energies and the measured NLDs.The CDFT combinatorial method yields results that are in reasonable agreement with the existing experimental data.展开更多
Finding clusters based on density represents a significant class of clustering algorithms.These methods can discover clusters of various shapes and sizes.The most studied algorithm in this class is theDensity-Based Sp...Finding clusters based on density represents a significant class of clustering algorithms.These methods can discover clusters of various shapes and sizes.The most studied algorithm in this class is theDensity-Based Spatial Clustering of Applications with Noise(DBSCAN).It identifies clusters by grouping the densely connected objects into one group and discarding the noise objects.It requires two input parameters:epsilon(fixed neighborhood radius)and MinPts(the lowest number of objects in epsilon).However,it can’t handle clusters of various densities since it uses a global value for epsilon.This article proposes an adaptation of the DBSCAN method so it can discover clusters of varied densities besides reducing the required number of input parameters to only one.Only user input in the proposed method is the MinPts.Epsilon on the other hand,is computed automatically based on statistical information of the dataset.The proposed method finds the core distance for each object in the dataset,takes the average of these distances as the first value of epsilon,and finds the clusters satisfying this density level.The remaining unclustered objects will be clustered using a new value of epsilon that equals the average core distances of unclustered objects.This process continues until all objects have been clustered or the remaining unclustered objects are less than 0.006 of the dataset’s size.The proposed method requires MinPts only as an input parameter because epsilon is computed from data.Benchmark datasets were used to evaluate the effectiveness of the proposed method that produced promising results.Practical experiments demonstrate that the outstanding ability of the proposed method to detect clusters of different densities even if there is no separation between them.The accuracy of the method ranges from 92%to 100%for the experimented datasets.展开更多
Dense cropping increases crop yield but intensifies resource competition,which reduces single plant yield and limits potential yield growth.Optimizing canopy spacing could enhance resource utilization,support crop mor...Dense cropping increases crop yield but intensifies resource competition,which reduces single plant yield and limits potential yield growth.Optimizing canopy spacing could enhance resource utilization,support crop morphological development and increase yield.Here,a three-year study was performed to verify the feasibility of adjusting row spacing to further enhance yield in densely planted soybeans.Of three row-spacing configurations(40-40,20-40,and 20-60 cm)and two planting densities(normal 180,000 plants ha 1 and high 270,000 plants ha 1).The differences in canopy structure,plant morphological development,photosynthetic capacity and their impact on yield were analyzed.Row spacing configurations have a significant effect on canopy transmittance(CT).The 20-60 cm row spacing configuration increased CT and creates a favorable canopy light environment,in which plant height is reduced,while branching is promoted.This approach reduces plant competition,optimizes the developments of leaf area per plant,specific leaf area,leaf area development rate,leaf area duration and photosynthetic physiological indices(F_(v)/F_(m),ETR,P_(n)).The significant increase of 11.9%-34.2%in canopy apparent photosynthesis(CAP)is attributed to the significant optimization of plant growth and photosynthetic physiology through CT,an important contributing factor to yield increases.The yield in the 20-60 cm treatment is 4.0%higher than in equidistant planting under normal planting density,but 5.9%under high density,primarily driven by CAP and pod number.These findings suggest that suitable row spacing configurations optimize the light environment for plants,promote source-sink transformation in soybeans,and further improve yield.In practice,a 20-60 cm row spacing configuration could be employed for high-density soybean planting to achieve a more substantial yield gain.展开更多
The soaring demand for smart portable electronics and electric vehicles is propelling the advancements in high-energy–density lithium-ion batteries.Lithium manganese iron phosphate(LiMn_(x)Fe_(1-x)PO_(4))has garnered...The soaring demand for smart portable electronics and electric vehicles is propelling the advancements in high-energy–density lithium-ion batteries.Lithium manganese iron phosphate(LiMn_(x)Fe_(1-x)PO_(4))has garnered significant attention as a promising positive electrode material for lithium-ion batteries due to its advantages of low cost,high safety,long cycle life,high voltage,good high-temperature performance,and high energy density.Although LiMn_(x)Fe_(1-x)PO_(4)has made significant breakthroughs in the past few decades,there are still facing great challenges in poor electronic conductivity and Li-ion diffusion,manganese dissolution affecting battery cycling performance,as well as low tap density.This review systematically summarizes the reaction mechanisms,various synthesis methods,and electrochemical properties of LiMn_(x)Fe_(1-x)PO_(4)to analyze reaction processes accurately and guide material preparation.Later,the main challenges currently faced are concluded,and the corresponding various modification strategies are discussed to enhance the reaction kinetics and electrochemical performance of LiMn_(x)Fe_(1-x)PO_(4),including multi-scale particle regulation,heteroatom doping,surface coating,as well as microscopic morphology design.Finally,in view of the current research challenges faced by intrinsic reaction processes,kinetics,and energy storage applications,the promising research directions are anticipated.More importantly,it is expected to provide key insights into the development of high-performance and stable LiMn_(x)Fe_(1-x)PO_(4)materials,to achieve practical energy storage requirements.展开更多
High-density planting increases maize yield but also canopy crowding and stalk lodging.Aiming this contradiction,a wavy canopy was created using interlaced chemical application(IC)of a plant growth retardant at the V1...High-density planting increases maize yield but also canopy crowding and stalk lodging.Aiming this contradiction,a wavy canopy was created using interlaced chemical application(IC)of a plant growth retardant at the V14 stage with three densities(60,000,75,000,and 90,000 plants ha-1,indicated by D1,D2,and D3,respectively)for two seasons.The results showed that the IC-treated wavy canopy featuring both natural height(IC-H)and dwarfed(IC-L)plants,improved light transmission by 8.54%,8.49%,and 16.49%on average than the corresponding controls(CK)at D1,D2,and D3,respectively.The alleviation of canopy crowding stimulated leaf photosynthesis,sugar availability,basal-internode strength,and decreased plant lodging ratios in both IC-H and IC-L,particularly under higher densities.Meanwhile,the IC populations produced significantly higher yield than CK,with an average increase of 3.38%,16.70%,and 15.28%at D1,D2,and D3,respectively.Collectively,this study proposed a new wavy canopy strategy using plant growth retardant to simultaneously increase yield performance and lodging resistance,thus offering a sustainable solution for further development of high-density maize production.展开更多
With the increasing demand for controllable source logging,research on data-processing algorithms that meet accuracy requirements has become key to the development of controllable-source-logging tools.This study theor...With the increasing demand for controllable source logging,research on data-processing algorithms that meet accuracy requirements has become key to the development of controllable-source-logging tools.This study theoretically derives the relationship between the formation density and inelastic gamma count rate to investigate the data-processing methods for deuterium–tritium(D–T)source neutron-gamma density logging while drilling.Then,algorithms for the net inelastic gamma count-rate extraction and neutron transport correction are studied using Monte Carlo simulations.A new method for fast-neutron effect identification and additional correction is proposed to improve the density-calculation accuracy of gas-filled and heavy-mineral formations.Finally,the effectiveness and accuracy of the proposed data-processing methods are verified based on simulated and measured data.The results show that the density-calculation accuracy of water-bearing conventional formations in simulated data is±0.02 g/cm^(3).The accuracy of gas-filled and heavy-mineral formations after the additional fast-neutron effect correction is±0.025 g/cm^(3).For the measured data from the actual tool,the algorithms perform well in the density calculation.The density results obtained using the processing algorithms are consistent with the density data provided by NeoScope.Therefore,the D–T source neutron-gamma density-logging algorithms proposed in this study can obtain relatively accurate data-processing results for a variety of formations.This study provides technical support for engineering applications and the development of logging tools for controllable-source neutron-density logging.展开更多
Aircraft disturbs the adjacent atmospheric environment in flight,forming spatial distribution features of atmospheric density that differ from the natural background,which may potentially be utilized as tracer charact...Aircraft disturbs the adjacent atmospheric environment in flight,forming spatial distribution features of atmospheric density that differ from the natural background,which may potentially be utilized as tracer characteristics to introduce new technologies for indirectly sensing the presence of aircraft.In this paper,the concept of a long-range aircraft detection based on the atmospheric disturbance density field is proposed,and the detection mode of tomographic imaging of the scattering light of an atmospheric disturbance flow field is designed.By modeling the spatial distribution of the disturbance density field,the scattered echo signal images of active light towards the disturbance field at long distance are simulated.On this basis,the characteristics of the disturbance optical signal at the optimal detection resolution are analyzed.The results show that the atmospheric disturbance flow field of the supersonic aircraft presents circular in the light-scattering echo images.The disturbance signal can be further highlighted by differential processing of the adjacent scattering images.As the distance behind the aircraft increases,the diffusion range of the disturbance signal increases,and the signal intensity and contrast with the background decrease.Under the ground-based observation conditions of the aircraft at a height of 10000 m,a Mach number of1.6,and a detection distance of 100 km,the contrast between the disturbance signal and the back-ground was 30 d B at a distance of one time from the rear of the fuselage,and the diffusion diameter of the disturbance signal was 50 m.At a distance eight times the length of the aircraft,the contrast decreased to 10 dB,and the diameter increased to 290 m.The contrast was reduced to 3 dB at a distance nine times the length of the aircraft,and the diameter was diffused to 310 m.These results indicate the possibility of long-range aircraft detection based on the characteristics of the atmospheric density field.展开更多
Machine picking in cotton is an emerging practice in India,to solve the problems of labour shortages and production costs increasing.Cotton production has been declining in recent years;however,the high density planti...Machine picking in cotton is an emerging practice in India,to solve the problems of labour shortages and production costs increasing.Cotton production has been declining in recent years;however,the high density planting system(HDPS)offers a viable method to enhance productivity by increasing plant populations per unit area,optimizing resource utilization,and facilitating machine picking.Cotton is an indeterminate plant that produce excessive vegeta-tive growth in favorable soil fertility and moisture conditions,which posing challenges for efficient machine picking.To address this issue,the application of plant growth retardants(PGRs)is essential for controlling canopy architecture.PGRs reduce internode elongation,promote regulated branching,and increase plant compactness,making cotton plants better suited for machine picking.PGRs application also optimizes photosynthates distribution between veg-etative and reproductive growth,resulting in higher yields and improved fibre quality.The integration of HDPS and PGRs applications results in an optimal plant architecture for improving machine picking efficiency.However,the success of this integration is determined by some factors,including cotton variety,environmental conditions,and geographical variations.These approaches not only address yield stagnation and labour shortages but also help to establish more effective and sustainable cotton farming practices,resulting in higher cotton productivity.展开更多
BACKGROUND Various stone factors can affect the net results of shock wave lithotripsy(SWL).Recently a new factor called variation coefficient of stone density(VCSD)is being considered to have an impact on stone free r...BACKGROUND Various stone factors can affect the net results of shock wave lithotripsy(SWL).Recently a new factor called variation coefficient of stone density(VCSD)is being considered to have an impact on stone free rates.AIM To assess the role of VCSD in determining success of SWL in urinary calculi.METHODS Charts review was utilized for collection of data variables.The patients were subjected to SWL,using an electromagnetic lithotripter.Mean stone density(MSD),stone heterogeneity index(SHI),and VCSD were calculated by generating regions of interest on computed tomography(CT)images.Role of these factors were determined by applying the relevant statistical tests for continuous and categorical variables and a P value of<0.05 was gauged to be statistically significant.RESULTS There were a total of 407 patients included in the analysis.The mean age of the subjects in this study was 38.89±14.61 years.In total,165 out of the 407 patients could not achieve stone free status.The successful group had a significantly lower stone volume as compared to the unsuccessful group(P<0.0001).Skin to stone distance was not dissimilar among the two groups(P=0.47).MSD was significantly lower in the successful group(P<0.0001).SHI and VCSD were both significantly higher in the successful group(P<0.0001).CONCLUSION VCSD,a useful CT based parameter,can be utilized to gauge stone fragility and hence the prediction of SWL outcomes.展开更多
The stability and electrocatalytic efficiency of transition metal oxides for water splitting is determined by geometric and electronic structure,especially under high current densities.Herein,a newly designed lamella-...The stability and electrocatalytic efficiency of transition metal oxides for water splitting is determined by geometric and electronic structure,especially under high current densities.Herein,a newly designed lamella-heterostructured nanoporous CoFe/CoFe_(2)O_(4) and CeO_(2−x),in situ grown on nickel foam(NF),holds great promise as a high-efficient bifunctional electrocatalyst(named R-CoFe/Ce/NF)for water splitting.Experimental characterization verifies surface reconstruction from CoFe alloy/oxide to highly active CoFeOOH during in situ electrochemical polarization.By virtues of three-dimensional nanoporous architecture and abundant electroactive CoFeOOH/CeO_(2−x) heterostructure interfaces,the R-CoFe/Ce/NF electrode achieves low overpotentials for oxygen evolution(η_(10)=227 mV;η_(500)=450 mV)and hydrogen evolution(η_(10)=35 mV;η_(408)=560 mV)reactions with high normalized electrochemical active surface areas,respectively.Additionally,the alkaline full water splitting electrolyzer of R-CoFe/Ce/NF||R-CoFe/Ce/NF achieves a current density of 50 mA·cm^(−2) only at 1.75 V;the decline of activity is satisfactory after 100-h durability test at 300 mA·cm^(−2).Density functional theory also demonstrates that the electron can transfer from CeO_(2−x) by virtue of O atom to CoFeOOH at CoFeOOH/CeO_(2−x) heterointerfaces and enhancing the adsorption of reactant,thus optimizing electronic structure and Gibbs free energies for the improvement of the activity for water splitting.展开更多
The graded density impactor(GDI)dynamic loading technique is crucial for acquiring the dynamic physical property parameters of materials used in weapons.The accuracy and timeliness of GDI structural design are key to ...The graded density impactor(GDI)dynamic loading technique is crucial for acquiring the dynamic physical property parameters of materials used in weapons.The accuracy and timeliness of GDI structural design are key to achieving controllable stress-strain rate loading.In this study,we have,for the first time,combined one-dimensional fluid computational software with machine learning methods.We first elucidated the mechanisms by which GDI structures control stress and strain rates.Subsequently,we constructed a machine learning model to create a structure-property response surface.The results show that altering the loading velocity and interlayer thickness has a pronounced regulatory effect on stress and strain rates.In contrast,the impedance distribution index and target thickness have less significant effects on stress regulation,although there is a matching relationship between target thickness and interlayer thickness.Compared with traditional design methods,the machine learning approach offers a10^(4)—10^(5)times increase in efficiency and the potential to achieve a global optimum,holding promise for guiding the design of GDI.展开更多
ZGH401 alloy was prepared under varying laser power levels and scanning speeds by the orthogonal test method using selective laser melting(SLM).The effect of different energy densities on microstructure and mechanical...ZGH401 alloy was prepared under varying laser power levels and scanning speeds by the orthogonal test method using selective laser melting(SLM).The effect of different energy densities on microstructure and mechanical properties of the formed alloy was investigated.The microstructure of ZGH401 was analyzed by scanning electron microscope,electron back-scattered diffraction,and electron probe microanalysis.The results show that the defects of the as-built ZGH401 are gradually reduced,the relative density is correspondingly enhanced with increasing the energy density,and the ultimate density can reach 99.6%.An increase in laser power leads to a corresponding rise in hardness of ZGH401,while a faster scanning speed reduces the residual stress in asbuilt ZGH401 samples.In addition,better tensile properties are achieved at room temperature due to more grain boundaries perpendicular to the build direction than parallel to the build direction.The precipitated phases are identified as carbides and Laves phases via chemical composition analysis,with fewer carbides observed at the molten pool boundaries than within the molten pools.展开更多
High-density germanate glasses doped with Tb^(3+)ions were synthesized via the melt-quenching meth-od.The physical and luminescent properties of these glasses were characterized through various techniques,in-cluding d...High-density germanate glasses doped with Tb^(3+)ions were synthesized via the melt-quenching meth-od.The physical and luminescent properties of these glasses were characterized through various techniques,in-cluding density measurement,differential scanning calorimetry(DSC),photoluminescence(PL)spectroscopy,X-ray excited luminescence(XEL)spectroscopy,and fluorescence decay analysis.The densities of the germanate glasses were greater than 6.1 g/cm^(3).Upon excitations of ultraviolet(UV)light and X-rays,the glasses emitted in-tense green emissions.The fluorescence lifetime of the strongest emission peak at 544 nm,measured under 377 nm excitation,ranged from 1.52 ms to 1.32 ms.In the glass specimens,the maximum XEL integral intensity reached roughly 26%of that of the commercially available Bi_(4)Ge_(3)O_(12)(BGO)crystal.These results indicate that Tb^(3+)-doped high-density germanate scintillating glasses hold potential as scintillation materials for X-ray imaging applications.展开更多
基金Supported by Science and Technology Project of China Tobacco Zhejiang Industrial Co.,Ltd.(2023330000340093).
文摘[Objectives]To investigate the effects of different planting densities and nitrogen application rates on the yield and quality of the tobacco cultivar Chuxue 80.[Methods]A field experiment was conducted in Hubei Province,evaluating various combinations of planting density and nitrogen rate for Chuxue 80.[Results]At the maturity stage,the TN1 treatment(5 kg N per 667 m^(2) with a density of 1900 plants per 667 m^(2))demonstrated the most favorable agronomic performance.The TN9 treatment(11 kg N per 667 m^(2) with a density of 1110 plants per 667 m^(2))achieved the highest wrapper tobacco yield and output value.Meanwhile,the TN5 treatment(8 kg N per 667 m^(2) with a density of 1515 plants per 667 m^(2))resulted in the best smoking quality.[Conclusions]The TN9 treatment,with a planting density of 1110 plants per 667 m^(2) and a nitrogen application rate of 11 kg per 667 m^(2),is recommended as the optimal cultivation practice for Chuxue 80 in Hubei Province.
基金supported by the National Natural Science Foundation of China(U23B20151 and 52171253).
文摘Although traditional gamma-gamma density(GGD)logging technology is widely utilized,its potential environmental risks have prompted the development of more environmentally friendly neutron-gamma density(NGD)logging technology.However,NGD measurements are influenced by both neutron and gamma radiations.In the logging environment,variations in the formation composition indicate different elemental compositions,which affect the neutron-gamma reaction cross-sections and gamma generation.Compared to traditional gamma sources such as Cs-137,these changes significantly affect the generation and transport of neutron-induced inelastic gamma rays and hinder accurate measurements.To address this,a novel method is proposed that incorporates the mass attenuation coefficient function to account for the effects of various lithologies and pore contents on gamma-ray attenuation,thereby achieving more accurate density measurements by clarifying the transport processes of inelastic gamma rays with varying energies and spatial distributions in varied logging environments.The proposed method avoids the complex correction of neutron transport and is verified through Monte Carlo simulations for its applicability across various lithologies and pore contents,demonstrating absolute density errors that are less than 0.02 g/cm^(3)in clean formations and indicating good accuracy.This study clarifies the NGD mechanism and provides theoretical guidance for the application of NGD logging methods.Further studies will be conducted on extreme environmental conditions and tool calibration.
基金supported by the Beijing Natural Science Foundation(Grant No.3252013)the Innovation Program for Quantum Science and Technology(Grant No.2021ZD0300402)+1 种基金the National Natural Science Foundation of China(Grant No.61673041)Key Area Research and Development Program of Guangdong Province(Grant No.2021B0101410005)。
文摘Atomic spin gyroscopes are promising candidates for next-generation inertial navigation due to extremely high theoretical precision,relatively small size among atomic gyroscopes,and promising potential for miniaturization.In particular,the spin-exchange relaxation-free(SERF)atomic gyroscope relies on optical pumping to polarize atoms,enabling rotation sensing through the Faraday optical rotation angle(FORA).However,fluctuations in atomic density introduce systematic errors in FORA measurements,limiting long-term stability.We present a data-driven decoupling method that isolates atomic density fluctuations from the FORA signal by modeling spatially resolved light absorption in the vapor cell.The model accounts for the spatial distribution of spin polarization in the pump-light interaction volume,density-dependent relaxation rates,wall-induced relaxation,and polarization diffusion,and is implemented within a finite-element framework.Compared to the conventional Lambert-Beer law,which assumes one-dimensional homogeneity,our approach captures the full threedimensional density and polarization distribution,significantly improving the accuracy of light absorption modeling.The resulting absorption-density maps are used to train a feedforward neural network,yielding a high-precision estimator for atomic density fluctuations.This estimator enables the construction of a decoupling equation that separates the density contribution from the FORA signal.Experimental validation shows that this method improves the bias instability atσ(100 s)of the gyroscope was improved by 73.1%compared to traditional platinum-resistance-based stabilization.The proposed framework is general and can be extended to other optical pumping-based sensors,such as optically pumped magnetometers.
基金financially supported by the National Natural Science Foundation of China (42477044,32171648 and U23A2017)the Hubei Provincial Science and Technology Program,China (2025AFD451 and 2022CFB030)。
文摘Insight into the carbon turnover in soil aggregates and density fractions is essential for reducing the uncertainty in estimating carbon pools on the Tibetan Plateau,and how they vary with land use type is unclear.In this study,the effect of land use type on carbon storage and fractionation was quantified based on organic carbon and its ^(13)C abundance at the microscale of soil aggregates and density fractions in Tibetan alpine ecosystems.The sequence of soil aggregate destruction in the land use types of plantation(13.1%)<shrubland(32.7%)<grassland(47.9%)<farmland(61.8%)shows that plantations strengthen the soil structure.Plantation land had a greater contribution of light fraction organic carbon(28.3%)but a lower contribution of mineral-associated organic carbon(40.6%)to the carbon stock compared to farmland(13.5 and 70.3%).Interestingly,plantation land enhanced the aggregational differentiation of organic carbon and ^(13)C in each density fraction,whereas no such phenomenon existed in the soil organic carbon.Carbon isotope analyses revealed that carbon transfer in the plantation land occurred from the light fraction in macroaggregates(–24.9‰)to the mineral-associated fraction in microaggregates(–19.9‰).When compared to the other three land use types,the low transferability of carbon in aggregates and density fractions in plantation land provides a stable carbon pool for the Tibetan Plateau.This study shows that plantations can mitigate global climate change by slowing carbon transfer and increasing carbon storage at the microscale of aggregates and density fractions in alpine regions.
基金the National Space Science Center (NSSC) of the Chinese Academy of Sciences for full support of this research workfunded by the Tian Mu-1 Constellation Atmospheric Density Detector (Grant No. E3C1162110)
文摘In this study,we analyze the impact of the May 2024 geomagnetic storm on the thermospheric mass density by using TianMu-1 constellation satellite(TM02,TM06,TM07,TM11,TM15)observations.These observations reveal intense large-scale traveling atmospheric disturbances(TADs)originating at high latitudes and propagating equatorward.Observations by TM02 captured the evolution of a TAD structure:An initial amplitude of~3.89×10^(-12)kg/m^(3)at hundred-kilometer scale subsequently intensified to 4.78×10^(-12)kg/m^(3),with the spatial extent expanding to the thousand-kilometer level.Significant hemispheric asymmetry was observed:the absolute density was higher predominantly in the northern hemisphere(TM02,TM06,TM07,TM11),whereas the difference in the relative density consistently showed greater enhancements in the southern hemisphere across all satellites,with the maximum north-south density differences exceeding 195%-640%above 60°latitude.In conjunction with SuperDARN(Super Dual Auroral Radar Network)observations,this striking hemispheric asymmetry can likely be attributed to disparities in plasma convection patterns between the two hemispheres.Furthermore,density perturbation characteristics exhibited strong local time(LT)dependence:Near noon(~10.7 LT,TM02 descending),the northern hemisphere onset preceded the southern onset.Conversely,near dusk(~17.6 LT,TM15 descending),the southern onset led the northern onset by approximately 3 hours.Ascending orbits(TM02,TM06,TM07,TM15)typically yielded larger global density enhancements compared with smaller southern-confined enhancements during descending orbits.Satellite TM11 showed comparable perturbations in both ascending and descending orbits.By leveraging its unique orbital architecture,the TianMu-1 constellation enables global near-simultaneous multi-LT sampling,providing a robust data foundation for both scientific research and engineering applications.
基金supported by the Hubei Provincial Science and Technology Project,China(2025CSA039)the National Natural Science Foundation of China(32001467)。
文摘Coordinating light and nitrogen(N)distribution within a canopy is essential for improving rice yield and resource use efficiency.However,limited research has examined light and N distribution in response to planting density and N rate,and their relationships with grain yield,radiation use efficiency(RUE),and N use efficiency for grain production(NUEg)in rice.A two-year field experiment was conducted with two hybrid varieties under three N levels,0 kg ha^(-1)(N1),90 kg ha^(-1)(N2)and 180 kg ha^(-1)(N3),and two planting densities,22.2 hills m-2(D1)and 33.3 hills m^(-2)(D2).Results showed 3.4%higher yield and 4.4%higher NUEg under N2D2 compared with N3D1.The extinction coefficient for N(K_(N))and light(K_(L))and their ratio(K_(N)/K_(L))at heading stage were significantly influenced by N rate,planting density,and their interaction.K_(N)decreased with the increase of N input or planting density.Compared to N1,K_(N)decreased by 43.5 and 58.8%under N2 and N3,respectively,while K_(N)under D2 decreased by 16.0%compared to D1.Higher K_(L)and K_(N)/K_(L)values occurred under low N rates,with opposite trends under high N rates.Increased planting density led to decreased K_(L)and K_(N)/K_(L)values.N2D2 demonstrated higher K_(L)and K_(N),and thus comparable K_(N)/K_(L),compared to N3D1.Correlation analysis revealed K_(L)negatively correlated with RUE,while K_(N)and K_(N)/K_(L)positively correlated with NUEg.These findings indicate that increasing planting density under reduced N input could maintain rice yield while enhancing resource use efficiency through regulation of canopy light and N distribution.
基金partially supported by the Helmholtz Imaging platform through the project“SmartPhase.”。
文摘Understanding the complex plasma dynamics in ultra-intense relativistic laser-solid interactions is of fundamental importance for applications of laser-plasma-based particle accelerators,the creation of high-energy-density matter,understanding planetary science,and laser-driven fusion energy.However,experimental efforts in this regime have been limited by the lack of accessibility of over-critical densities and the poor spatiotemporal resolution of conventional diagnostics.Over the last decade,the advent of femtosecond brilliant hard X-ray free-electron lasers(XFELs)has opened new horizons to overcome these limitations.Here,for the first time,we present full-scale spatiotemporal measurements of solid-density plasma dynamics,including preplasma generation with tens of nanometer scale length driven by the leading edge of a relativistic laser pulse,ultrafast heating and ionization at the main pulse arrival,the laser-driven blast wave,and transient surface return current-induced compression dynamics up to hundreds of picoseconds after interaction.These observations are enabled by utilizing a novel combination of advanced X-ray diagnostics including small-angle X-ray scattering,resonant X-ray emission spectroscopy,and propagation-based X-ray phase-contrast imaging simultaneously at the European XFEL-HED beamline station.
基金supported by the Natural Science Foundation of Jilin Province(No.20220101017JC)National Natural Science Foundation of China(No.11675063)Key Laboratory of Nuclear Data Foundation(JCKY2020201C157).
文摘In this study,a microscopic method for calculating the nuclear level density(NLD)based on the covariant density functional theory(CDFT)is developed.The particle-hole state density is calculated by a combinatorial method using single-particle level schemes obtained from the CDFT,and the level densities are then obtained by considering collective effects such as vibration and rotation.Our results are compared with those of other NLD models,including phenomenological,microstatisti-cal and nonrelativistic Hartree–Fock–Bogoliubov combinatorial models.This comparison suggests that the general trends among these models are essentially the same,except for some deviations among the different NLD models.In addition,the NLDs obtained using the CDFT combinatorial method with normalization are compared with experimental data,including the observed cumulative number of levels at low excitation energies and the measured NLDs.The CDFT combinatorial method yields results that are in reasonable agreement with the existing experimental data.
基金The author extends his appreciation to theDeputyship forResearch&Innovation,Ministry of Education in Saudi Arabia for funding this research work through the project number(IFPSAU-2021/01/17758).
文摘Finding clusters based on density represents a significant class of clustering algorithms.These methods can discover clusters of various shapes and sizes.The most studied algorithm in this class is theDensity-Based Spatial Clustering of Applications with Noise(DBSCAN).It identifies clusters by grouping the densely connected objects into one group and discarding the noise objects.It requires two input parameters:epsilon(fixed neighborhood radius)and MinPts(the lowest number of objects in epsilon).However,it can’t handle clusters of various densities since it uses a global value for epsilon.This article proposes an adaptation of the DBSCAN method so it can discover clusters of varied densities besides reducing the required number of input parameters to only one.Only user input in the proposed method is the MinPts.Epsilon on the other hand,is computed automatically based on statistical information of the dataset.The proposed method finds the core distance for each object in the dataset,takes the average of these distances as the first value of epsilon,and finds the clusters satisfying this density level.The remaining unclustered objects will be clustered using a new value of epsilon that equals the average core distances of unclustered objects.This process continues until all objects have been clustered or the remaining unclustered objects are less than 0.006 of the dataset’s size.The proposed method requires MinPts only as an input parameter because epsilon is computed from data.Benchmark datasets were used to evaluate the effectiveness of the proposed method that produced promising results.Practical experiments demonstrate that the outstanding ability of the proposed method to detect clusters of different densities even if there is no separation between them.The accuracy of the method ranges from 92%to 100%for the experimented datasets.
基金supported by the Biological Breeding-National Science and Technology Major Project(2023ZD0403305)National Natural Science Foundation of China(32101845)+1 种基金the National Key Research and Development Program of China(2023YFE0105000)the China Agriculture Research System(CARS-04).
文摘Dense cropping increases crop yield but intensifies resource competition,which reduces single plant yield and limits potential yield growth.Optimizing canopy spacing could enhance resource utilization,support crop morphological development and increase yield.Here,a three-year study was performed to verify the feasibility of adjusting row spacing to further enhance yield in densely planted soybeans.Of three row-spacing configurations(40-40,20-40,and 20-60 cm)and two planting densities(normal 180,000 plants ha 1 and high 270,000 plants ha 1).The differences in canopy structure,plant morphological development,photosynthetic capacity and their impact on yield were analyzed.Row spacing configurations have a significant effect on canopy transmittance(CT).The 20-60 cm row spacing configuration increased CT and creates a favorable canopy light environment,in which plant height is reduced,while branching is promoted.This approach reduces plant competition,optimizes the developments of leaf area per plant,specific leaf area,leaf area development rate,leaf area duration and photosynthetic physiological indices(F_(v)/F_(m),ETR,P_(n)).The significant increase of 11.9%-34.2%in canopy apparent photosynthesis(CAP)is attributed to the significant optimization of plant growth and photosynthetic physiology through CT,an important contributing factor to yield increases.The yield in the 20-60 cm treatment is 4.0%higher than in equidistant planting under normal planting density,but 5.9%under high density,primarily driven by CAP and pod number.These findings suggest that suitable row spacing configurations optimize the light environment for plants,promote source-sink transformation in soybeans,and further improve yield.In practice,a 20-60 cm row spacing configuration could be employed for high-density soybean planting to achieve a more substantial yield gain.
基金National Natural Science Foundation of China(52104294)Fundamental Research Funds for the Central Universities(FRF-TP-19-079A1)。
文摘The soaring demand for smart portable electronics and electric vehicles is propelling the advancements in high-energy–density lithium-ion batteries.Lithium manganese iron phosphate(LiMn_(x)Fe_(1-x)PO_(4))has garnered significant attention as a promising positive electrode material for lithium-ion batteries due to its advantages of low cost,high safety,long cycle life,high voltage,good high-temperature performance,and high energy density.Although LiMn_(x)Fe_(1-x)PO_(4)has made significant breakthroughs in the past few decades,there are still facing great challenges in poor electronic conductivity and Li-ion diffusion,manganese dissolution affecting battery cycling performance,as well as low tap density.This review systematically summarizes the reaction mechanisms,various synthesis methods,and electrochemical properties of LiMn_(x)Fe_(1-x)PO_(4)to analyze reaction processes accurately and guide material preparation.Later,the main challenges currently faced are concluded,and the corresponding various modification strategies are discussed to enhance the reaction kinetics and electrochemical performance of LiMn_(x)Fe_(1-x)PO_(4),including multi-scale particle regulation,heteroatom doping,surface coating,as well as microscopic morphology design.Finally,in view of the current research challenges faced by intrinsic reaction processes,kinetics,and energy storage applications,the promising research directions are anticipated.More importantly,it is expected to provide key insights into the development of high-performance and stable LiMn_(x)Fe_(1-x)PO_(4)materials,to achieve practical energy storage requirements.
基金supported by the National Key Research and Development Program of China(2023YFD2303302,2022YFD2300803)the National Natural Science Foundation of China(32160445)the China Agriculture Research System of MOF and MARA(CARS-02-16).
文摘High-density planting increases maize yield but also canopy crowding and stalk lodging.Aiming this contradiction,a wavy canopy was created using interlaced chemical application(IC)of a plant growth retardant at the V14 stage with three densities(60,000,75,000,and 90,000 plants ha-1,indicated by D1,D2,and D3,respectively)for two seasons.The results showed that the IC-treated wavy canopy featuring both natural height(IC-H)and dwarfed(IC-L)plants,improved light transmission by 8.54%,8.49%,and 16.49%on average than the corresponding controls(CK)at D1,D2,and D3,respectively.The alleviation of canopy crowding stimulated leaf photosynthesis,sugar availability,basal-internode strength,and decreased plant lodging ratios in both IC-H and IC-L,particularly under higher densities.Meanwhile,the IC populations produced significantly higher yield than CK,with an average increase of 3.38%,16.70%,and 15.28%at D1,D2,and D3,respectively.Collectively,this study proposed a new wavy canopy strategy using plant growth retardant to simultaneously increase yield performance and lodging resistance,thus offering a sustainable solution for further development of high-density maize production.
基金supported by the Natural Science Foundation of Shandong(ZR2022MD019)Technology Development Project of China Oilfield Services Limited(G2317A-0414T077)+3 种基金Science and Technology Project of China National O shore Oil Corporation(CNOOC-KJ GJHXJSGG YF 2022-01)Open Fund Project of CNPC Logging(CNLC2022-9C06)Fundamental Research Foundation for Central Universities(22CX01001A-2)China National Petroleum Corporation Scientific Research and Technology Development Project(2021DJ3801)。
文摘With the increasing demand for controllable source logging,research on data-processing algorithms that meet accuracy requirements has become key to the development of controllable-source-logging tools.This study theoretically derives the relationship between the formation density and inelastic gamma count rate to investigate the data-processing methods for deuterium–tritium(D–T)source neutron-gamma density logging while drilling.Then,algorithms for the net inelastic gamma count-rate extraction and neutron transport correction are studied using Monte Carlo simulations.A new method for fast-neutron effect identification and additional correction is proposed to improve the density-calculation accuracy of gas-filled and heavy-mineral formations.Finally,the effectiveness and accuracy of the proposed data-processing methods are verified based on simulated and measured data.The results show that the density-calculation accuracy of water-bearing conventional formations in simulated data is±0.02 g/cm^(3).The accuracy of gas-filled and heavy-mineral formations after the additional fast-neutron effect correction is±0.025 g/cm^(3).For the measured data from the actual tool,the algorithms perform well in the density calculation.The density results obtained using the processing algorithms are consistent with the density data provided by NeoScope.Therefore,the D–T source neutron-gamma density-logging algorithms proposed in this study can obtain relatively accurate data-processing results for a variety of formations.This study provides technical support for engineering applications and the development of logging tools for controllable-source neutron-density logging.
文摘Aircraft disturbs the adjacent atmospheric environment in flight,forming spatial distribution features of atmospheric density that differ from the natural background,which may potentially be utilized as tracer characteristics to introduce new technologies for indirectly sensing the presence of aircraft.In this paper,the concept of a long-range aircraft detection based on the atmospheric disturbance density field is proposed,and the detection mode of tomographic imaging of the scattering light of an atmospheric disturbance flow field is designed.By modeling the spatial distribution of the disturbance density field,the scattered echo signal images of active light towards the disturbance field at long distance are simulated.On this basis,the characteristics of the disturbance optical signal at the optimal detection resolution are analyzed.The results show that the atmospheric disturbance flow field of the supersonic aircraft presents circular in the light-scattering echo images.The disturbance signal can be further highlighted by differential processing of the adjacent scattering images.As the distance behind the aircraft increases,the diffusion range of the disturbance signal increases,and the signal intensity and contrast with the background decrease.Under the ground-based observation conditions of the aircraft at a height of 10000 m,a Mach number of1.6,and a detection distance of 100 km,the contrast between the disturbance signal and the back-ground was 30 d B at a distance of one time from the rear of the fuselage,and the diffusion diameter of the disturbance signal was 50 m.At a distance eight times the length of the aircraft,the contrast decreased to 10 dB,and the diameter increased to 290 m.The contrast was reduced to 3 dB at a distance nine times the length of the aircraft,and the diameter was diffused to 310 m.These results indicate the possibility of long-range aircraft detection based on the characteristics of the atmospheric density field.
文摘Machine picking in cotton is an emerging practice in India,to solve the problems of labour shortages and production costs increasing.Cotton production has been declining in recent years;however,the high density planting system(HDPS)offers a viable method to enhance productivity by increasing plant populations per unit area,optimizing resource utilization,and facilitating machine picking.Cotton is an indeterminate plant that produce excessive vegeta-tive growth in favorable soil fertility and moisture conditions,which posing challenges for efficient machine picking.To address this issue,the application of plant growth retardants(PGRs)is essential for controlling canopy architecture.PGRs reduce internode elongation,promote regulated branching,and increase plant compactness,making cotton plants better suited for machine picking.PGRs application also optimizes photosynthates distribution between veg-etative and reproductive growth,resulting in higher yields and improved fibre quality.The integration of HDPS and PGRs applications results in an optimal plant architecture for improving machine picking efficiency.However,the success of this integration is determined by some factors,including cotton variety,environmental conditions,and geographical variations.These approaches not only address yield stagnation and labour shortages but also help to establish more effective and sustainable cotton farming practices,resulting in higher cotton productivity.
文摘BACKGROUND Various stone factors can affect the net results of shock wave lithotripsy(SWL).Recently a new factor called variation coefficient of stone density(VCSD)is being considered to have an impact on stone free rates.AIM To assess the role of VCSD in determining success of SWL in urinary calculi.METHODS Charts review was utilized for collection of data variables.The patients were subjected to SWL,using an electromagnetic lithotripter.Mean stone density(MSD),stone heterogeneity index(SHI),and VCSD were calculated by generating regions of interest on computed tomography(CT)images.Role of these factors were determined by applying the relevant statistical tests for continuous and categorical variables and a P value of<0.05 was gauged to be statistically significant.RESULTS There were a total of 407 patients included in the analysis.The mean age of the subjects in this study was 38.89±14.61 years.In total,165 out of the 407 patients could not achieve stone free status.The successful group had a significantly lower stone volume as compared to the unsuccessful group(P<0.0001).Skin to stone distance was not dissimilar among the two groups(P=0.47).MSD was significantly lower in the successful group(P<0.0001).SHI and VCSD were both significantly higher in the successful group(P<0.0001).CONCLUSION VCSD,a useful CT based parameter,can be utilized to gauge stone fragility and hence the prediction of SWL outcomes.
基金sponsored by the National Natural Science Foundation of China(Nos.5210125 and 52375422)the Science Research Project of Hebei Education Department(No.BJK2023058)the Natural Science Foundation of Hebei Province(Nos.E2020208069,B2020208083 and E202320801).
文摘The stability and electrocatalytic efficiency of transition metal oxides for water splitting is determined by geometric and electronic structure,especially under high current densities.Herein,a newly designed lamella-heterostructured nanoporous CoFe/CoFe_(2)O_(4) and CeO_(2−x),in situ grown on nickel foam(NF),holds great promise as a high-efficient bifunctional electrocatalyst(named R-CoFe/Ce/NF)for water splitting.Experimental characterization verifies surface reconstruction from CoFe alloy/oxide to highly active CoFeOOH during in situ electrochemical polarization.By virtues of three-dimensional nanoporous architecture and abundant electroactive CoFeOOH/CeO_(2−x) heterostructure interfaces,the R-CoFe/Ce/NF electrode achieves low overpotentials for oxygen evolution(η_(10)=227 mV;η_(500)=450 mV)and hydrogen evolution(η_(10)=35 mV;η_(408)=560 mV)reactions with high normalized electrochemical active surface areas,respectively.Additionally,the alkaline full water splitting electrolyzer of R-CoFe/Ce/NF||R-CoFe/Ce/NF achieves a current density of 50 mA·cm^(−2) only at 1.75 V;the decline of activity is satisfactory after 100-h durability test at 300 mA·cm^(−2).Density functional theory also demonstrates that the electron can transfer from CeO_(2−x) by virtue of O atom to CoFeOOH at CoFeOOH/CeO_(2−x) heterointerfaces and enhancing the adsorption of reactant,thus optimizing electronic structure and Gibbs free energies for the improvement of the activity for water splitting.
基金supported by the Guangdong Major Project of Basic and Applied Basic Research(Grant No.2021B0301030001)the National Key Research and Development Program of China(Grant No.2021YFB3802300)the Foundation of National Key Laboratory of Shock Wave and Detonation Physics(Grant No.JCKYS2022212004)。
文摘The graded density impactor(GDI)dynamic loading technique is crucial for acquiring the dynamic physical property parameters of materials used in weapons.The accuracy and timeliness of GDI structural design are key to achieving controllable stress-strain rate loading.In this study,we have,for the first time,combined one-dimensional fluid computational software with machine learning methods.We first elucidated the mechanisms by which GDI structures control stress and strain rates.Subsequently,we constructed a machine learning model to create a structure-property response surface.The results show that altering the loading velocity and interlayer thickness has a pronounced regulatory effect on stress and strain rates.In contrast,the impedance distribution index and target thickness have less significant effects on stress regulation,although there is a matching relationship between target thickness and interlayer thickness.Compared with traditional design methods,the machine learning approach offers a10^(4)—10^(5)times increase in efficiency and the potential to achieve a global optimum,holding promise for guiding the design of GDI.
基金National Defense Science and Technology Project Management Center(2021-JCJQ-JJ-0092)。
文摘ZGH401 alloy was prepared under varying laser power levels and scanning speeds by the orthogonal test method using selective laser melting(SLM).The effect of different energy densities on microstructure and mechanical properties of the formed alloy was investigated.The microstructure of ZGH401 was analyzed by scanning electron microscope,electron back-scattered diffraction,and electron probe microanalysis.The results show that the defects of the as-built ZGH401 are gradually reduced,the relative density is correspondingly enhanced with increasing the energy density,and the ultimate density can reach 99.6%.An increase in laser power leads to a corresponding rise in hardness of ZGH401,while a faster scanning speed reduces the residual stress in asbuilt ZGH401 samples.In addition,better tensile properties are achieved at room temperature due to more grain boundaries perpendicular to the build direction than parallel to the build direction.The precipitated phases are identified as carbides and Laves phases via chemical composition analysis,with fewer carbides observed at the molten pool boundaries than within the molten pools.
文摘High-density germanate glasses doped with Tb^(3+)ions were synthesized via the melt-quenching meth-od.The physical and luminescent properties of these glasses were characterized through various techniques,in-cluding density measurement,differential scanning calorimetry(DSC),photoluminescence(PL)spectroscopy,X-ray excited luminescence(XEL)spectroscopy,and fluorescence decay analysis.The densities of the germanate glasses were greater than 6.1 g/cm^(3).Upon excitations of ultraviolet(UV)light and X-rays,the glasses emitted in-tense green emissions.The fluorescence lifetime of the strongest emission peak at 544 nm,measured under 377 nm excitation,ranged from 1.52 ms to 1.32 ms.In the glass specimens,the maximum XEL integral intensity reached roughly 26%of that of the commercially available Bi_(4)Ge_(3)O_(12)(BGO)crystal.These results indicate that Tb^(3+)-doped high-density germanate scintillating glasses hold potential as scintillation materials for X-ray imaging applications.
