High-temperature heating surface such as superheater and reheater of large-sized utility boiler all experiences a relatively severe working conditions. The failure of boiler tubes will directly impact the safe and eco...High-temperature heating surface such as superheater and reheater of large-sized utility boiler all experiences a relatively severe working conditions. The failure of boiler tubes will directly impact the safe and economic operation of boiler. An on-line life monitoring model of high-temperature heating surface was set up according to the well-known L-M formula of the creep damages. The tube wall metal temperature and working stress was measured by on-line monitoring, and with this model, the real-time calculation of the life expenditure of the heating surface tube bundles were realized. Based on the technique the on-line life monitoring and management system of high-temperature heating surface was developed for a 300 MW utility boiler. An effective device was thus suggested for the implementation of the safe operation and the condition-based maintenance of utility boilers.展开更多
To enhance the heat-dissipation capacity of infrared(IR)stealth structures in high-temperature environments,a selective heat emitter with multi-band thermal management is fabricated.This emitter comprises a hightemper...To enhance the heat-dissipation capacity of infrared(IR)stealth structures in high-temperature environments,a selective heat emitter with multi-band thermal management is fabricated.This emitter comprises a hightemperature-resistant titanium dioxide(TiO_(2))/hafnium dioxide(HfO_(2))/Cr/Ge/Mo multi-film-layer structure.Additionally,the thickness of each layer is determined by the transfer-matrix algorithm.The emissivity of the structure across the IR band is simulated,and its electric field distributions are analyzed across different wavelengths.The stealth-and heat-dissipation bands of the structure are calculated to confirm its overall stealth and heat-dissipation capabilities.The results reveal that the average emissivities of the fabricated TiO_(2)/HfO_(2)/Cr/Ge/Mo multi-film-layer structure decrease to 0.21 and 0.27 within 3-5 and 8-14μm atmospheric window bands,respectively,achieving the IR concealment effect.Conversely,the average emissivities of the structure increase to 0.56 and 0.80 within the 2.5-3 and 5-8μm non-atmospheric window(NAW)bands,respectively.These high-emissivity bands enhance radiative heat dissipation to reduce heat accumulation and further weaken the detection and characterization of thermal signals.The simulated thermal images confirm the IR-stealth effect of the structure within a wide temperature range.Moreover,its efficient NAW heat-dissipation capability improves its operating life in high-temperature environments.展开更多
To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretre...To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.展开更多
The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF...The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF)argon plasma,and the temperatures were measured using a DPV-2000 monitor.A model combining the electromagnetism,thermal flow,and heat transfer characteristics of powder during in-flight heating in argon plasma was proposed.The melting processes of CeO_(2)powders of different diameters,with and without thermal resistance effect,were investigated.Results show that the heating process of CeO_(2)powder particles consists of three main stages,one of which is relevant to a dimensionless parameter known as the Biot number.When the Biot value≥0.1,thermal resistance increases significantly,especially for the larger powders.The predicted temperature of the particles at the outlet(1800–2880 K)is in good agreement with the experimental result.展开更多
Commercial wrought high-strength Cu-Cr-Zr alloys face limited high-temperature properties due to the rapid coarsening or dissolution of Cr precipitates.Here,we report a laser powder bed fusion(LPBF)fabricated Cu-0.84C...Commercial wrought high-strength Cu-Cr-Zr alloys face limited high-temperature properties due to the rapid coarsening or dissolution of Cr precipitates.Here,we report a laser powder bed fusion(LPBF)fabricated Cu-0.84Cr-0.42Zr(wt.%)alloy with exceptional heat resistance after aging.Primary Cr@Cu_(5)Zr phase(∼39.8 nm)with core-shell structure and a high density of heat-stable dislocations were intro-duced from the rapid solidification of LPBF and enabled the alloy to gain significant improvement in high-temperature properties.After aging treatment,secondary Cr and Cu_(51)Zr_(14)phases(∼3.4 nm)were precipitated,in which Zr solute was segregated at one side of the Cr phase,enhancing the thermal sta-bility of Cr phase.The excellent combinations of strength and thermal conductivity were achieved at or above 400℃.Particularly at 600℃,the aged sample not only exhibited a high tensile strength of∼196 MPa,which significantly surpassed that of wrought Cu-Cr-Zr alloys,but also possessed a thermal conductivity of∼349 W/(m K)comparable to that of pure copper.展开更多
In the application of clean energy heating,the development of a low-carbon winter heat supply in severe cold regions of China is hindered by the stability of heat sources.To ensure the smooth transformation of traditi...In the application of clean energy heating,the development of a low-carbon winter heat supply in severe cold regions of China is hindered by the stability of heat sources.To ensure the smooth transformation of traditional energy to clean energy heating modes,the feasibility of a heating system coupling traditional and clean energies was studied using the heating system of an office building in a cold region of China as the research object.The air-source heat pump(ASHP)heating system used in the office building in this study was field-tested.The problems existing in the heating system were analysed using testing data combined with the existing conditions of the building.Solar-air source heat pump coupled heating system based on heat grid(NH-SASHP)was proposed,and the system model was established using TRNSYS software.The operation effect of the NH-SASHP coupling system was analysed,and the control strategy of the coupling system was optimized.The results showed that NH-SASHP system possessed certain advantages over the ASHP system during the heating season,and the energy saving rate is 50.79%compared with the ASHP system.Under the most unfavourable working conditions in the middle of severe cold,the indoor temperature compliance rate was 100%.The average coefficient of performance of the heat pump system(COPsys)of NH-SASHP system and ASHP system were 6.27 and 3.55,respectively.The operating cost of the NH-SASHP system is approximately 72.3%of the ASHP system.展开更多
A calcium zirconate crucible material with excellent performance was prepared by fixing the particle size proportion and exploring the addition of Y_(2)O_(3).The results show that Y^(3+)solid-dissolves into c-ZrO_(2)t...A calcium zirconate crucible material with excellent performance was prepared by fixing the particle size proportion and exploring the addition of Y_(2)O_(3).The results show that Y^(3+)solid-dissolves into c-ZrO_(2)to occupy the Zr^(4+)positions,leading to structural defects and promoting the sintering of calcium zirconate.Adding 0.5 wt.%Y_(2)O_(3)into calcium zirconate can enhance the modulus of rupture,reduce the thermal expansion coefficient,and improve the thermal shock resistance.Through high-temperature test,it is found that adding 0.5 wt.%Y_(2)O_(3)significantly improves the corrosion resistance of the sample.展开更多
The buoyancy-induced flow constitutes a core scientific issue for thermal management of electronic devices and thermal design of energy systems,where accurate characterization of flow and heat transfer is essential to...The buoyancy-induced flow constitutes a core scientific issue for thermal management of electronic devices and thermal design of energy systems,where accurate characterization of flow and heat transfer is essential to improve thermal efficiency.In this work,buoyancy-induced flow above two heating elements flush-mounted at the bottom of a square enclosure containing air is numerically investigated over a range of Rayleigh numbers(0<Ra≤1.5×10^(8)),with a focus on equal and unequal heat flux conditions under a constraint of constant total thermal energy input.Distinct flow transitions are observed in both cases,leading to the identification of three flow regimes:Steady,periodic unsteady,and chaotic unsteady.Two types of periodic flows are distinguished,in which the first is a periodic flow dominated by a fundamental frequency(FF)and its integer-multiple frequencies(INTMF),while the second is a more complex periodic flow featuring FF,INTMF,and their sub-harmonics.The transitions between these regimes are affected by the relative heat flux of the two heaters.When the heat flux of the two heaters is unequal,the range of Rayleigh numbers corresponding to periodic flow is suppressed.It is also found that the time-averaged maximum temperature of the strong heater increases more rapidly with Ra,while that of the weak heater increases more slowly,reflecting the interaction between buoyancy-driven flow dynamics and asymmetric heat input.Analysis of the time-averaged Nusselt number demonstrates that heat dissipation from the isothermal walls remains roughly equivalent,even when the heat flux of the two heaters differs by a factor of two.These findings highlight the critical roles of Rayleigh number,the number of heaters,and the heat flux ratio of the heaters in determining heat transfer and flow characteristics for buoyancy-driven convection systems,providing important theoretical support and design references for engineering scenarios such as electronic devices and design of new energy systems.展开更多
The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical pr...The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical properties,can significantly enhance the oxidation resistance of Mg alloys.Based on our previous study,we conclude that REs such as Gd,Y,and Ce enhance the oxidation resistance of Mg-RE alloys.This article comprehensively reviews recent research progress on high-temperature oxidation behavior and the potential mechanism in Mg-RE alloys.Based on the thermodynamic and kinetic analyses,the evolution of the complex oxide system formed during the high-temperature oxidation of Mg-RE alloys is first summarized.The diffusion behavior and concentration control mechanisms of REs during the oxidation process and how these mechanisms affect the sustained growth of the oxide film and antioxidant properties were elucidated.Moreover,the different structures of the oxide films were classified,and their properties were discussed.Finally,this paper introduces the applications of commonly used REs in Mg alloys and frontier research on their oxidation mechanisms.Based on the above review,we propose that future research perspectives can be explored in terms of expanding the experimental temperature range for oxidation tests,optimizing the chemical composition by adding trace REs to study their synergistic mechanism,revealing the underlying oxidation mechanism through advanced in situ microscopic characterization methods,and investigating the mechanical properties of oxide films using diverse approaches.展开更多
TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing Ti...TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing TiB_(2)coatings have disadvantages such as high equipment costs,complicated processes,and highly toxic gas emissions.This paper proposes an environmentally friendly method,which requires inexpensive equipment and simple processing,for preparing TiB_(2)coating on molybdenum via electrophoretic deposition within Na3AlF6-based molten salts.The produced TiB_(2)layer had an approximate thickness of 60μm and exhibited high density,outstanding hardness(38.2 GPa)and robust adhesion strength(51 N).Additionally,high-temperature oxidation experiments revealed that,at900℃,the TiB_(2)coating provided effective protection to the molybdenum substrate against oxidation for 3 h.This result indicates that the TiB_(2)coating prepared on molybdenum using molten salt electrophoretic deposition possesses good high-temperature oxidation resistance.展开更多
In this study,the design,analysis,manufacturing,and testing of a 3D-printed conformal microstrip array antenna for high-temperature environments is presented.3D printing technology is used to fabricate a curved cerami...In this study,the design,analysis,manufacturing,and testing of a 3D-printed conformal microstrip array antenna for high-temperature environments is presented.3D printing technology is used to fabricate a curved ceramic substrate,and laser sintering and microdroplet spraying processes are used to add the conductive metal on the curved substrate.The problems of gain loss,bandwidth reduction,and frequency shift caused by high temperatures are addressed by using a proper antenna design,with parasitic patches,slots,and metal resonant cavities.The antenna prototype is characterized by the curved substrates and the conductive metals for the power dividers,the patch,and the ground plane;its performance is examined up to a temperature of 600℃in a muffle furnace and compared with the results from the numerical analysis.The results show that the antenna can effectively function at 600℃and even higher temperatures.展开更多
Oat milk has gained widespread consumer acceptance for its creamy texture,β-glucan content,and environmental sustainability.However,its relatively low protein content(typically 2-3 g/serving)presents a nutritional li...Oat milk has gained widespread consumer acceptance for its creamy texture,β-glucan content,and environmental sustainability.However,its relatively low protein content(typically 2-3 g/serving)presents a nutritional limitation,largely due to poor protein solubility.This study investigated how processing conditions influence protein content and functional stability in oat-based systems by applying two treatments:(1)α-amylase enzymatic hydrolysis,and(2)pH-shifting(from pH 7 to 12 and back)with mild heating(50℃for 10 or 30 min).Oat protein solutions were formulated from two sources:oat flour(OF)and oat protein isolate(OPI).Results suggests that α-amylase pretreatment effectively reduced starch-driven viscosity in OF,facilitating better sample handling and centrifugation.Following pH-shifting and heat treatment,both OF and OPI solutions showed significantly improved protein solubility,with protein content increased from 2.0 to~6.5 g/serving.These changes were accompanied by reduced precipitation,smaller particle sizes,and more negative zeta potential values,indicating enhanced colloidal stability.SDS-PAGE analysis revealed the presence of low-molecular-weight protein fractions,supporting increased solubilization.Fluorescence microscopy confirmed the formation of smaller,more uniformly dispersed particles in treated samples compared to controls.However,noticeable darkening or browning occurred under high-pH heating,indicating potential challenges in color control.The findings provide useful information for future industrial applications and product innovation in the plant-based beverage sector.展开更多
Giant magnetoimpedance(GMI)sensors are increasingly employed in modern magnetic sensing technologies.However,improving the GMI performance of magnetic cores remains challenging due to intrinsic limitations in material...Giant magnetoimpedance(GMI)sensors are increasingly employed in modern magnetic sensing technologies.However,improving the GMI performance of magnetic cores remains challenging due to intrinsic limitations in material properties and structural stability.In this work,we explore the use of Joule heating to enhance the GMI response of Fe_(20)Ni_(80)/Cu composite wires.By applying a current of 1.8 A for 10 min,notable improvements in magnetic domain uniformity and a reduction in domain spacing are observed.Under these conditions,GMI ratios reach 1870% in the non-diagonal mode and1147%in the diagonal mode,respectively,highlighting their potential for applications in high-precision weak magnetic field sensing.展开更多
Nuclear heating plays an important aspect in design and deployment of both fission and fusion reactors and experimental devices in terms of cooling requirements. Two experimental campaigns in the framework of a collab...Nuclear heating plays an important aspect in design and deployment of both fission and fusion reactors and experimental devices in terms of cooling requirements. Two experimental campaigns in the framework of a collaboration project between the French Atomic and Alternative Energy Commission(CEA) and Jožef Stefan Institute(JSI), Slovenia, have been performed at the JSI TRIGA reactor for the experimental assessment of nuclear heating in fission and fusion-relevant materials by the differential calorimetry technique, based on the CALMOS and CARMEN differential calorimeters, previously developed at CEA. The results of the first campaign performed at reactor powers between 100 and 250 kW have already been reported, highlighting some measurement difficulties. Therefore, the second campaign was performed at a lower reactor power of 30 kW to overcome these issues. Moreover, a computational analysis of the experiments was performed using the JSIR2S code package to calculate the nuclear heating levels. Both experiments and their reproduction by simulations are described in detail. We present a comparison of the previously reported measured nuclear heating values of the first campaign with the computational results, with consistent underestimation by simulations by 8–35%. We report the experimental and computational results for the second experimental campaign performed at a reactor power of 30 kW. The simulated heating values were in agreement with the measurements within the measured heating uncertainty, with simulated heating 2.7–11.3% lower than the experimental values.展开更多
In this study,an architecture featuring a gradient conductive network structure and three-dimensional dual-continuous network structure is constructed in a carbon nanotubes/cellulose-boron nitride/poly(vinyl alcohol)(...In this study,an architecture featuring a gradient conductive network structure and three-dimensional dual-continuous network structure is constructed in a carbon nanotubes/cellulose-boron nitride/poly(vinyl alcohol)(CNT/cellulose-BN/PVA)composite.Using cellulose aerogel as a template,CNT were incorporated into the cellulose template by vertically impregnating the CNT suspension.Following the impregnation of BN/PVA and high-pressure compression,three-dimensional dual-continuous network structure was successfully constructed in the CNT/cellulose-BN/PVA composite.The comprehensive performance of the composite,including electromagnetic interference(EMI)shielding and Joule heating performance,was investigated.The results indicate that the total EMI shielding effectiveness(SE)for the CNT/cellulose-BN/PVA composite reveals similar values for electromagnetic waves incident from different directions,but totally different shielding mechanisms.For the CNT/cellulose-BN/PVA composite with three impregnation cycles of CNT,the EMI SE values exceeded 39 dB for electromagnetic waves incident from both the high-and low-CNT-content sides.93%of the microwaves were reflected when electromagnetic waves were incident from the high-CNT-content side,while the reflection coefficient decreased to 0.44 for the transverse direction.In addition,the construction of the dual-continuous network structure enabled the composite to exhibit both excellent electrical conductivity and good thermal conductivity simultaneously,endowing the material with good Joule heating performance.CNT/cellulose-BN/PVA composite films have significant potential for application as EMI shielding materials in extremely cold weather.展开更多
Flash Joule heating(FJH),as a high-efficiency and low-energy consumption technology for advanced materials synthesis,has shown significant potential in the synthesis of graphene and other functional carbon materials.B...Flash Joule heating(FJH),as a high-efficiency and low-energy consumption technology for advanced materials synthesis,has shown significant potential in the synthesis of graphene and other functional carbon materials.Based on the Joule effect,the solid carbon sources can be rapidly heated to ultra-high temperatures(>3000 K)through instantaneous high-energy current pulses during FJH,thus driving the rapid rearrangement and graphitization of carbon atoms.This technology demonstrates numerous advantages,such as solvent-and catalyst-free features,high energy conversion efficiency,and a short process cycle.In this review,we have systematically summarized the technology principle and equipment design for FJH,as well as its raw materials selection and pretreatment strategies.The research progress in the FJH synthesis of flash graphene,carbon nanotubes,graphene fibers,and anode hard carbon,as well as its by-products,is also presented.FJH can precisely optimize the microstructures of carbon materials(e.g.,interlayer spacing of turbostratic graphene,defect concentration,and heteroatom doping)by regulating its operation parameters like flash voltage and flash time,thereby enhancing their performances in various applications,such as composite reinforcement,metal-ion battery electrodes,supercapacitors,and electrocatalysts.However,this technology is still challenged by low process yield,macroscopic material uniformity,and green power supply system construction.More research efforts are also required to promote the transition of FJH from laboratory to industrial-scale applications,thus providing innovative solutions for advanced carbon materials manufacturing and waste management toward carbon neutrality.展开更多
With the laser remelting of cast alloys combined with non-equilibrium liquidus projection thermodynamic calculations,a high-strength and heat-resistant Al-3Fe-2Mn alloy was designed.Incorporating Mn atoms into the met...With the laser remelting of cast alloys combined with non-equilibrium liquidus projection thermodynamic calculations,a high-strength and heat-resistant Al-3Fe-2Mn alloy was designed.Incorporating Mn atoms into the metastable nanoscale Al_(6)Fe phase,occupying some lattice sites,enhances its thermal stability.Additionally,during rapid solidification of laser powder bed fusion(L-PBF),the solubility of Fe and Mn elements in the aluminum alloy increases significantly,forming a supersaturated solid solution with improved strength.This alloy demonstrates excellent processability,achieving a relative density of over 99%,and tensile strengths of 295 MPa at 200℃ and 230 MPa at 300℃.The Al-3Fe-2Mn alloy holds great potential for wide applications due to its high strength at high temperature.展开更多
The influence of Ti and Zr,Nb alloying on the microstructures and performance of laser-welded molybdenum socket joints was investigated.Following Nb alloying,the average microhardness of the fusion zone(FZ)increased f...The influence of Ti and Zr,Nb alloying on the microstructures and performance of laser-welded molybdenum socket joints was investigated.Following Nb alloying,the average microhardness of the fusion zone(FZ)increased from HV 194.7 to HV 283.3.Additionally,Nb can react with O to form dispersed Nb_(2)O_(5) along grain boundaries,impeding grain boundary migration and dislocation movement while reducing the content of volatile Mo oxide along these boundaries.The incorporation of Nb in FZ partially inhibits pore defects and enhances joint load-bearing capacity.In comparison to the laser-welded joints without adding Nb(LW),the tensile strength of the laser-welded joints with Nb alloying(LW-Nb)was significantly improved by approximately 69%from 327.5 to 551.7 MPa.Furthermore,the fracture mechanism of the joints transitioned from intergranular fracture to transgranular fracture.展开更多
Thermal storage electric heating(TSEH),as a prevalent variable load resource,offers significant potential for enhancing system flexibility when aggregated into a cluster.To address the uncertainties of renewable energ...Thermal storage electric heating(TSEH),as a prevalent variable load resource,offers significant potential for enhancing system flexibility when aggregated into a cluster.To address the uncertainties of renewable energy and load forecasting in active distribution networks(ADN),this paper proposes a multi-timescale coordinated optimal dispatch strategy that incorporates TSEH clusters.It utilizes the thermal storage characteristics and short-term regulation capabilities of TSEH,along with the rapid and gradual response characteristics of resources in active distribution grids,to develop a coordinated optimization dispatch mechanism for day-ahead,intraday,and real-time stages.It provides a coordinated optimized dispatch technique across several timescales for active distribution grids,taking into account the integration of TSEH clusters.The proposed method is validated on a modified IEEE 33-node system.Simulation results demonstrate that the participation of TSEH in collaborative optimization significantly reduces the total system operating cost by 8.71%compared to the scenario without TSEH.This cost reduction is attributed to a 10.84%decrease in interaction costs with the main grid and a 47.41%reduction in network loss costs,validating effective peak shaving and valley filling.The multi-timescale framework further enhances economic efficiency,with overall operating costs progressively decreasing by 3.91%(intraday)and 4.59%(real-time),and interaction costs further reduced by 5.34%and 9.25%,respectively.Moreover,the approach enhances system stability by effectively suppressing node voltage fluctuations and ensuring all voltages remain within safe operating limits during real-time operation.Therefore,the proposed approach achieves rational coordination of diverse resources,significantly improving the economic efficiency and stability of ADNs.展开更多
With the widespread application of combined heat and power(CHP)units,the economic dispatch of integrated electric and district heating systems(IEHSs)has drawn increasing attention.Because the electric power system(EPS...With the widespread application of combined heat and power(CHP)units,the economic dispatch of integrated electric and district heating systems(IEHSs)has drawn increasing attention.Because the electric power system(EPS)and district heating system(DHS)are generally managed separately,the decentralized dispatch pattern is preferable for the IEHS dispatch problem.However,many common decentralized methods suffer from the drawbacks of slow and local convergence.Moreover,the uncertainties of renewable generation cannot be ignored in a decentralized pattern.Additionally,the most commonly used individual chance constraints in distributionally robust optimization cannot consider safety constraints simultaneously,so the safe operation of an IEHS cannot be guaranteed.Thus,distributionally robust joint chance constraints and robust constraints are jointly introduced into the IEHS dispatch problem in this paper to obtain a stronger safety guarantee,and a method combined with Bonferroni and conditional value at risk(CVaR)approximation is presented to transform the original model into a quadratic program.Additionally,a dynamic boundary response(DBR)-based distributed algorithm based on multiparametric programming is proposed for a fast solution.Case studies showcase the necessity of using mixed distributionally robust joint chance constraints and robust constraints,as well as the effectiveness of the DBR algorithm.展开更多
文摘High-temperature heating surface such as superheater and reheater of large-sized utility boiler all experiences a relatively severe working conditions. The failure of boiler tubes will directly impact the safe and economic operation of boiler. An on-line life monitoring model of high-temperature heating surface was set up according to the well-known L-M formula of the creep damages. The tube wall metal temperature and working stress was measured by on-line monitoring, and with this model, the real-time calculation of the life expenditure of the heating surface tube bundles were realized. Based on the technique the on-line life monitoring and management system of high-temperature heating surface was developed for a 300 MW utility boiler. An effective device was thus suggested for the implementation of the safe operation and the condition-based maintenance of utility boilers.
基金The National Natural Science Foundation of China(No.52106099)the Science and Technology Development Joint Fundof Henan province(No.225200810077).
文摘To enhance the heat-dissipation capacity of infrared(IR)stealth structures in high-temperature environments,a selective heat emitter with multi-band thermal management is fabricated.This emitter comprises a hightemperature-resistant titanium dioxide(TiO_(2))/hafnium dioxide(HfO_(2))/Cr/Ge/Mo multi-film-layer structure.Additionally,the thickness of each layer is determined by the transfer-matrix algorithm.The emissivity of the structure across the IR band is simulated,and its electric field distributions are analyzed across different wavelengths.The stealth-and heat-dissipation bands of the structure are calculated to confirm its overall stealth and heat-dissipation capabilities.The results reveal that the average emissivities of the fabricated TiO_(2)/HfO_(2)/Cr/Ge/Mo multi-film-layer structure decrease to 0.21 and 0.27 within 3-5 and 8-14μm atmospheric window bands,respectively,achieving the IR concealment effect.Conversely,the average emissivities of the structure increase to 0.56 and 0.80 within the 2.5-3 and 5-8μm non-atmospheric window(NAW)bands,respectively.These high-emissivity bands enhance radiative heat dissipation to reduce heat accumulation and further weaken the detection and characterization of thermal signals.The simulated thermal images confirm the IR-stealth effect of the structure within a wide temperature range.Moreover,its efficient NAW heat-dissipation capability improves its operating life in high-temperature environments.
基金National Natural Science Foundation of China(52071274)Key Research and Development Projects of Shaanxi Province(2023-YBGY-442)Science and Technology Nova Project-Innovative Talent Promotion Program of Shaanxi Province(2020KJXX-062)。
文摘To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.
基金National Natural Science Foundation of China(11875039)Shanxi Scholarship Council of China(2023-033)+2 种基金Fundamental Research Program of Shanxi Province(202303021221071)China Baowu Low Carbon Metallurgical Innovation Foundation(2022)2023 Anhui Major Industrial Innovation Plan Project。
文摘The in-flight heating process of cerium dioxide(CeO_(2))powders was investigated through experiments and numerical simulations.In the experiment,CeO_(2)powder(average size of 30μm)was injected into radio-frequency(RF)argon plasma,and the temperatures were measured using a DPV-2000 monitor.A model combining the electromagnetism,thermal flow,and heat transfer characteristics of powder during in-flight heating in argon plasma was proposed.The melting processes of CeO_(2)powders of different diameters,with and without thermal resistance effect,were investigated.Results show that the heating process of CeO_(2)powder particles consists of three main stages,one of which is relevant to a dimensionless parameter known as the Biot number.When the Biot value≥0.1,thermal resistance increases significantly,especially for the larger powders.The predicted temperature of the particles at the outlet(1800–2880 K)is in good agreement with the experimental result.
基金supported by the National Natural Science Foun-dation of China(Nos.52127802 and 52431008).
文摘Commercial wrought high-strength Cu-Cr-Zr alloys face limited high-temperature properties due to the rapid coarsening or dissolution of Cr precipitates.Here,we report a laser powder bed fusion(LPBF)fabricated Cu-0.84Cr-0.42Zr(wt.%)alloy with exceptional heat resistance after aging.Primary Cr@Cu_(5)Zr phase(∼39.8 nm)with core-shell structure and a high density of heat-stable dislocations were intro-duced from the rapid solidification of LPBF and enabled the alloy to gain significant improvement in high-temperature properties.After aging treatment,secondary Cr and Cu_(51)Zr_(14)phases(∼3.4 nm)were precipitated,in which Zr solute was segregated at one side of the Cr phase,enhancing the thermal sta-bility of Cr phase.The excellent combinations of strength and thermal conductivity were achieved at or above 400℃.Particularly at 600℃,the aged sample not only exhibited a high tensile strength of∼196 MPa,which significantly surpassed that of wrought Cu-Cr-Zr alloys,but also possessed a thermal conductivity of∼349 W/(m K)comparable to that of pure copper.
文摘In the application of clean energy heating,the development of a low-carbon winter heat supply in severe cold regions of China is hindered by the stability of heat sources.To ensure the smooth transformation of traditional energy to clean energy heating modes,the feasibility of a heating system coupling traditional and clean energies was studied using the heating system of an office building in a cold region of China as the research object.The air-source heat pump(ASHP)heating system used in the office building in this study was field-tested.The problems existing in the heating system were analysed using testing data combined with the existing conditions of the building.Solar-air source heat pump coupled heating system based on heat grid(NH-SASHP)was proposed,and the system model was established using TRNSYS software.The operation effect of the NH-SASHP coupling system was analysed,and the control strategy of the coupling system was optimized.The results showed that NH-SASHP system possessed certain advantages over the ASHP system during the heating season,and the energy saving rate is 50.79%compared with the ASHP system.Under the most unfavourable working conditions in the middle of severe cold,the indoor temperature compliance rate was 100%.The average coefficient of performance of the heat pump system(COPsys)of NH-SASHP system and ASHP system were 6.27 and 3.55,respectively.The operating cost of the NH-SASHP system is approximately 72.3%of the ASHP system.
基金provided by the National Natural Science Foundation of China(NSFC)through the Joint Fund Project(No.U24A202815)the Youth Science Fund Project(No.52302031).
文摘A calcium zirconate crucible material with excellent performance was prepared by fixing the particle size proportion and exploring the addition of Y_(2)O_(3).The results show that Y^(3+)solid-dissolves into c-ZrO_(2)to occupy the Zr^(4+)positions,leading to structural defects and promoting the sintering of calcium zirconate.Adding 0.5 wt.%Y_(2)O_(3)into calcium zirconate can enhance the modulus of rupture,reduce the thermal expansion coefficient,and improve the thermal shock resistance.Through high-temperature test,it is found that adding 0.5 wt.%Y_(2)O_(3)significantly improves the corrosion resistance of the sample.
基金supported by the Tianjin Education Commission Research Program Project(No.2024KJ105)。
文摘The buoyancy-induced flow constitutes a core scientific issue for thermal management of electronic devices and thermal design of energy systems,where accurate characterization of flow and heat transfer is essential to improve thermal efficiency.In this work,buoyancy-induced flow above two heating elements flush-mounted at the bottom of a square enclosure containing air is numerically investigated over a range of Rayleigh numbers(0<Ra≤1.5×10^(8)),with a focus on equal and unequal heat flux conditions under a constraint of constant total thermal energy input.Distinct flow transitions are observed in both cases,leading to the identification of three flow regimes:Steady,periodic unsteady,and chaotic unsteady.Two types of periodic flows are distinguished,in which the first is a periodic flow dominated by a fundamental frequency(FF)and its integer-multiple frequencies(INTMF),while the second is a more complex periodic flow featuring FF,INTMF,and their sub-harmonics.The transitions between these regimes are affected by the relative heat flux of the two heaters.When the heat flux of the two heaters is unequal,the range of Rayleigh numbers corresponding to periodic flow is suppressed.It is also found that the time-averaged maximum temperature of the strong heater increases more rapidly with Ra,while that of the weak heater increases more slowly,reflecting the interaction between buoyancy-driven flow dynamics and asymmetric heat input.Analysis of the time-averaged Nusselt number demonstrates that heat dissipation from the isothermal walls remains roughly equivalent,even when the heat flux of the two heaters differs by a factor of two.These findings highlight the critical roles of Rayleigh number,the number of heaters,and the heat flux ratio of the heaters in determining heat transfer and flow characteristics for buoyancy-driven convection systems,providing important theoretical support and design references for engineering scenarios such as electronic devices and design of new energy systems.
基金supported by the Key R&D Program of Shandong Province,China(No.2025CXGC 010412)the National Key Research and Development Program of China(No.2022YFB3709300)the National Natural Science Foundation of China(No.U21A2048).
文摘The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical properties,can significantly enhance the oxidation resistance of Mg alloys.Based on our previous study,we conclude that REs such as Gd,Y,and Ce enhance the oxidation resistance of Mg-RE alloys.This article comprehensively reviews recent research progress on high-temperature oxidation behavior and the potential mechanism in Mg-RE alloys.Based on the thermodynamic and kinetic analyses,the evolution of the complex oxide system formed during the high-temperature oxidation of Mg-RE alloys is first summarized.The diffusion behavior and concentration control mechanisms of REs during the oxidation process and how these mechanisms affect the sustained growth of the oxide film and antioxidant properties were elucidated.Moreover,the different structures of the oxide films were classified,and their properties were discussed.Finally,this paper introduces the applications of commonly used REs in Mg alloys and frontier research on their oxidation mechanisms.Based on the above review,we propose that future research perspectives can be explored in terms of expanding the experimental temperature range for oxidation tests,optimizing the chemical composition by adding trace REs to study their synergistic mechanism,revealing the underlying oxidation mechanism through advanced in situ microscopic characterization methods,and investigating the mechanical properties of oxide films using diverse approaches.
基金supported by the Original Exploratory Program of the National Natural Science Foundation of China(No.52450012)。
文摘TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing TiB_(2)coatings have disadvantages such as high equipment costs,complicated processes,and highly toxic gas emissions.This paper proposes an environmentally friendly method,which requires inexpensive equipment and simple processing,for preparing TiB_(2)coating on molybdenum via electrophoretic deposition within Na3AlF6-based molten salts.The produced TiB_(2)layer had an approximate thickness of 60μm and exhibited high density,outstanding hardness(38.2 GPa)and robust adhesion strength(51 N).Additionally,high-temperature oxidation experiments revealed that,at900℃,the TiB_(2)coating provided effective protection to the molybdenum substrate against oxidation for 3 h.This result indicates that the TiB_(2)coating prepared on molybdenum using molten salt electrophoretic deposition possesses good high-temperature oxidation resistance.
基金National Natural Science Foundation of China(No.U2241205)the Natural Science Basic Research Program of Shaanxi(Nos.2022JC-33,2023-GHZD-35,and 2024JC-ZDXM-25)+1 种基金the Fundamental Research Funds for the Central Universitiesthe National 111 Project to provide fund for conducting experiments。
文摘In this study,the design,analysis,manufacturing,and testing of a 3D-printed conformal microstrip array antenna for high-temperature environments is presented.3D printing technology is used to fabricate a curved ceramic substrate,and laser sintering and microdroplet spraying processes are used to add the conductive metal on the curved substrate.The problems of gain loss,bandwidth reduction,and frequency shift caused by high temperatures are addressed by using a proper antenna design,with parasitic patches,slots,and metal resonant cavities.The antenna prototype is characterized by the curved substrates and the conductive metals for the power dividers,the patch,and the ground plane;its performance is examined up to a temperature of 600℃in a muffle furnace and compared with the results from the numerical analysis.The results show that the antenna can effectively function at 600℃and even higher temperatures.
基金supported by the USDA National Institute of Food and Agriculture,Hatch project 7009323.
文摘Oat milk has gained widespread consumer acceptance for its creamy texture,β-glucan content,and environmental sustainability.However,its relatively low protein content(typically 2-3 g/serving)presents a nutritional limitation,largely due to poor protein solubility.This study investigated how processing conditions influence protein content and functional stability in oat-based systems by applying two treatments:(1)α-amylase enzymatic hydrolysis,and(2)pH-shifting(from pH 7 to 12 and back)with mild heating(50℃for 10 or 30 min).Oat protein solutions were formulated from two sources:oat flour(OF)and oat protein isolate(OPI).Results suggests that α-amylase pretreatment effectively reduced starch-driven viscosity in OF,facilitating better sample handling and centrifugation.Following pH-shifting and heat treatment,both OF and OPI solutions showed significantly improved protein solubility,with protein content increased from 2.0 to~6.5 g/serving.These changes were accompanied by reduced precipitation,smaller particle sizes,and more negative zeta potential values,indicating enhanced colloidal stability.SDS-PAGE analysis revealed the presence of low-molecular-weight protein fractions,supporting increased solubilization.Fluorescence microscopy confirmed the formation of smaller,more uniformly dispersed particles in treated samples compared to controls.However,noticeable darkening or browning occurred under high-pH heating,indicating potential challenges in color control.The findings provide useful information for future industrial applications and product innovation in the plant-based beverage sector.
基金supported by the State Key Research and Development Program,Special Gravity Wave(Grant No.2023YFC2206003)the Gansu Provincial Science and Technology Program Funding(Grant No.24JRRA499)+1 种基金the Natural Science Foundation of Shandong Province(Grant No.ZR2024QB219)the Lanzhou City Science and Technology Program Project(Grant No.2025-2-47)。
文摘Giant magnetoimpedance(GMI)sensors are increasingly employed in modern magnetic sensing technologies.However,improving the GMI performance of magnetic cores remains challenging due to intrinsic limitations in material properties and structural stability.In this work,we explore the use of Joule heating to enhance the GMI response of Fe_(20)Ni_(80)/Cu composite wires.By applying a current of 1.8 A for 10 min,notable improvements in magnetic domain uniformity and a reduction in domain spacing are observed.Under these conditions,GMI ratios reach 1870% in the non-diagonal mode and1147%in the diagonal mode,respectively,highlighting their potential for applications in high-precision weak magnetic field sensing.
基金supported by the Slovenian Research Agency(research project NC-0001-Analysis of nuclear heating in a reactor,research core funding Reactor physics No.P2-0073,infrastructure program I0-0005)。
文摘Nuclear heating plays an important aspect in design and deployment of both fission and fusion reactors and experimental devices in terms of cooling requirements. Two experimental campaigns in the framework of a collaboration project between the French Atomic and Alternative Energy Commission(CEA) and Jožef Stefan Institute(JSI), Slovenia, have been performed at the JSI TRIGA reactor for the experimental assessment of nuclear heating in fission and fusion-relevant materials by the differential calorimetry technique, based on the CALMOS and CARMEN differential calorimeters, previously developed at CEA. The results of the first campaign performed at reactor powers between 100 and 250 kW have already been reported, highlighting some measurement difficulties. Therefore, the second campaign was performed at a lower reactor power of 30 kW to overcome these issues. Moreover, a computational analysis of the experiments was performed using the JSIR2S code package to calculate the nuclear heating levels. Both experiments and their reproduction by simulations are described in detail. We present a comparison of the previously reported measured nuclear heating values of the first campaign with the computational results, with consistent underestimation by simulations by 8–35%. We report the experimental and computational results for the second experimental campaign performed at a reactor power of 30 kW. The simulated heating values were in agreement with the measurements within the measured heating uncertainty, with simulated heating 2.7–11.3% lower than the experimental values.
基金financially supported by the National Natural Science Foundation of China(No.52103127)the Opening Project of the State Key Laboratory of Polymer Materials Engineering(Sichuan University)(No.sklpme2022-4-10)Shaanxi Provincial Science and Technology Department(No.2025GH-YBXM-042).
文摘In this study,an architecture featuring a gradient conductive network structure and three-dimensional dual-continuous network structure is constructed in a carbon nanotubes/cellulose-boron nitride/poly(vinyl alcohol)(CNT/cellulose-BN/PVA)composite.Using cellulose aerogel as a template,CNT were incorporated into the cellulose template by vertically impregnating the CNT suspension.Following the impregnation of BN/PVA and high-pressure compression,three-dimensional dual-continuous network structure was successfully constructed in the CNT/cellulose-BN/PVA composite.The comprehensive performance of the composite,including electromagnetic interference(EMI)shielding and Joule heating performance,was investigated.The results indicate that the total EMI shielding effectiveness(SE)for the CNT/cellulose-BN/PVA composite reveals similar values for electromagnetic waves incident from different directions,but totally different shielding mechanisms.For the CNT/cellulose-BN/PVA composite with three impregnation cycles of CNT,the EMI SE values exceeded 39 dB for electromagnetic waves incident from both the high-and low-CNT-content sides.93%of the microwaves were reflected when electromagnetic waves were incident from the high-CNT-content side,while the reflection coefficient decreased to 0.44 for the transverse direction.In addition,the construction of the dual-continuous network structure enabled the composite to exhibit both excellent electrical conductivity and good thermal conductivity simultaneously,endowing the material with good Joule heating performance.CNT/cellulose-BN/PVA composite films have significant potential for application as EMI shielding materials in extremely cold weather.
基金supported by the National Natural Science Foundation of China(52276196)the Foundation of State Key Laboratory of Coal Combustion(FSKLCCA2508)the High-level Talent Foundation of Anhui Agricultural University(rc412307).
文摘Flash Joule heating(FJH),as a high-efficiency and low-energy consumption technology for advanced materials synthesis,has shown significant potential in the synthesis of graphene and other functional carbon materials.Based on the Joule effect,the solid carbon sources can be rapidly heated to ultra-high temperatures(>3000 K)through instantaneous high-energy current pulses during FJH,thus driving the rapid rearrangement and graphitization of carbon atoms.This technology demonstrates numerous advantages,such as solvent-and catalyst-free features,high energy conversion efficiency,and a short process cycle.In this review,we have systematically summarized the technology principle and equipment design for FJH,as well as its raw materials selection and pretreatment strategies.The research progress in the FJH synthesis of flash graphene,carbon nanotubes,graphene fibers,and anode hard carbon,as well as its by-products,is also presented.FJH can precisely optimize the microstructures of carbon materials(e.g.,interlayer spacing of turbostratic graphene,defect concentration,and heteroatom doping)by regulating its operation parameters like flash voltage and flash time,thereby enhancing their performances in various applications,such as composite reinforcement,metal-ion battery electrodes,supercapacitors,and electrocatalysts.However,this technology is still challenged by low process yield,macroscopic material uniformity,and green power supply system construction.More research efforts are also required to promote the transition of FJH from laboratory to industrial-scale applications,thus providing innovative solutions for advanced carbon materials manufacturing and waste management toward carbon neutrality.
基金supported by the National Natural Science Foundation of China(No.U21B2073)the Science and Technology Project of the Science and Technology Department of Hubei Province,China(No.2022EHB020)。
文摘With the laser remelting of cast alloys combined with non-equilibrium liquidus projection thermodynamic calculations,a high-strength and heat-resistant Al-3Fe-2Mn alloy was designed.Incorporating Mn atoms into the metastable nanoscale Al_(6)Fe phase,occupying some lattice sites,enhances its thermal stability.Additionally,during rapid solidification of laser powder bed fusion(L-PBF),the solubility of Fe and Mn elements in the aluminum alloy increases significantly,forming a supersaturated solid solution with improved strength.This alloy demonstrates excellent processability,achieving a relative density of over 99%,and tensile strengths of 295 MPa at 200℃ and 230 MPa at 300℃.The Al-3Fe-2Mn alloy holds great potential for wide applications due to its high strength at high temperature.
基金National Key Research and Development Project of China (No. 2022YFB3707602)National Natural Science Foundation of China (Nos. 52005393, 51775416)。
文摘The influence of Ti and Zr,Nb alloying on the microstructures and performance of laser-welded molybdenum socket joints was investigated.Following Nb alloying,the average microhardness of the fusion zone(FZ)increased from HV 194.7 to HV 283.3.Additionally,Nb can react with O to form dispersed Nb_(2)O_(5) along grain boundaries,impeding grain boundary migration and dislocation movement while reducing the content of volatile Mo oxide along these boundaries.The incorporation of Nb in FZ partially inhibits pore defects and enhances joint load-bearing capacity.In comparison to the laser-welded joints without adding Nb(LW),the tensile strength of the laser-welded joints with Nb alloying(LW-Nb)was significantly improved by approximately 69%from 327.5 to 551.7 MPa.Furthermore,the fracture mechanism of the joints transitioned from intergranular fracture to transgranular fracture.
基金supported by Integrated Distribution Network Planning and Operational Enhancement Using Flexibility Domains Under Deep Human-Vehicle-Charger-Road-Grid Coupling(U22B20105).
文摘Thermal storage electric heating(TSEH),as a prevalent variable load resource,offers significant potential for enhancing system flexibility when aggregated into a cluster.To address the uncertainties of renewable energy and load forecasting in active distribution networks(ADN),this paper proposes a multi-timescale coordinated optimal dispatch strategy that incorporates TSEH clusters.It utilizes the thermal storage characteristics and short-term regulation capabilities of TSEH,along with the rapid and gradual response characteristics of resources in active distribution grids,to develop a coordinated optimization dispatch mechanism for day-ahead,intraday,and real-time stages.It provides a coordinated optimized dispatch technique across several timescales for active distribution grids,taking into account the integration of TSEH clusters.The proposed method is validated on a modified IEEE 33-node system.Simulation results demonstrate that the participation of TSEH in collaborative optimization significantly reduces the total system operating cost by 8.71%compared to the scenario without TSEH.This cost reduction is attributed to a 10.84%decrease in interaction costs with the main grid and a 47.41%reduction in network loss costs,validating effective peak shaving and valley filling.The multi-timescale framework further enhances economic efficiency,with overall operating costs progressively decreasing by 3.91%(intraday)and 4.59%(real-time),and interaction costs further reduced by 5.34%and 9.25%,respectively.Moreover,the approach enhances system stability by effectively suppressing node voltage fluctuations and ensuring all voltages remain within safe operating limits during real-time operation.Therefore,the proposed approach achieves rational coordination of diverse resources,significantly improving the economic efficiency and stability of ADNs.
基金supported by National Natural Science Foundation of China(52377107,52007105)and the Taishan Scholars Program.
文摘With the widespread application of combined heat and power(CHP)units,the economic dispatch of integrated electric and district heating systems(IEHSs)has drawn increasing attention.Because the electric power system(EPS)and district heating system(DHS)are generally managed separately,the decentralized dispatch pattern is preferable for the IEHS dispatch problem.However,many common decentralized methods suffer from the drawbacks of slow and local convergence.Moreover,the uncertainties of renewable generation cannot be ignored in a decentralized pattern.Additionally,the most commonly used individual chance constraints in distributionally robust optimization cannot consider safety constraints simultaneously,so the safe operation of an IEHS cannot be guaranteed.Thus,distributionally robust joint chance constraints and robust constraints are jointly introduced into the IEHS dispatch problem in this paper to obtain a stronger safety guarantee,and a method combined with Bonferroni and conditional value at risk(CVaR)approximation is presented to transform the original model into a quadratic program.Additionally,a dynamic boundary response(DBR)-based distributed algorithm based on multiparametric programming is proposed for a fast solution.Case studies showcase the necessity of using mixed distributionally robust joint chance constraints and robust constraints,as well as the effectiveness of the DBR algorithm.
