Valve-regulated-lead-acid (VRLA) battery charging performed in high-temperature environments is extremely risky under overcharge conditions, and may lead to a subsequent thermal runaway. A new pressure-controlled char...Valve-regulated-lead-acid (VRLA) battery charging performed in high-temperature environments is extremely risky under overcharge conditions, and may lead to a subsequent thermal runaway. A new pressure-controlled charging method was adopted and the charging characteristics of the pressure-controlled VRLA battery in high-temperature environments were ex-perimentally studied. The concept was tested in a large temperature gradient to obtain more details about the effects of users' accustomed charging and discharging modes on battery capacity. The premature capacity loss (PCL) phenomenon under high temperature exposure was analyzed. The results showed that the capacity loss could be recovered by charging using a large current.展开更多
In order to improve the thermal environment of high-temperature heading face,moisture content of supply air is reduced by dehumidification, and the relative humidity ofenvironment air of the heading face is also decre...In order to improve the thermal environment of high-temperature heading face,moisture content of supply air is reduced by dehumidification, and the relative humidity ofenvironment air of the heading face is also decreased.First, according to the coefficient ofperformance of dehumidifier, the capacity of dehumidification was calculated.Second, inthe engineering example of the heading face, quantitative changes of WBGT (Wet BulbGlobe Temperature) were compared between with dehumidification and without dehumidification.Based on WBGT standards, the thermal comfort of high-temperature environmentof heading face was evaluated between with dehumidification and without handling.Reducingthe relative humidity of airflow through dehumidification, the thermal comfort of ahigh-temperature environment of heading face can improve greatly.Even if dry bulb temperatureof airflow is not decreased, the thermal comfort of heading face environment isalso improved to some extent.展开更多
Theaim of the present work wasto analyze moisture flow and moisture content data for high-temperature drying by usingan advanced image- processing algorithm.Since wood starts to shrink below the fibre saturation point...Theaim of the present work wasto analyze moisture flow and moisture content data for high-temperature drying by usingan advanced image- processing algorithm.Since wood starts to shrink below the fibre saturation point during drying, the size and shape of wood will change. The dry wood image was thoroughly transformed to the shape of the wet wood image prior to calculating the dry weight moisture content. The use of the image- processing algorithm for the dry weight moisture content on density data from the CT-scanning during drying in a controlled high-temperature environment showed that this method is a powerful tool for analyzing the moisture flow inside the wood piece. Furthermore, the new CT-scanner together with the climate chamber gave unique results, as it has not been possible to study high-temperature drying with this method before.展开更多
Conformal thin-film sensors enable precise monitoring of the operating conditions of components in extreme environments.However,the development of these sensors encounters major challenges,especially in uniformly appl...Conformal thin-film sensors enable precise monitoring of the operating conditions of components in extreme environments.However,the development of these sensors encounters major challenges,especially in uniformly applying multiple film layers on complex metallic surfaces and accurately capturing diverse operational parameters.This work reports a multi-sensor design and multi-layer additive manufacturing process targeting spherical metallic substrates.The proposed high-temperature dip-coating and self-leveling fabrication process achieves high-temperature thin-film coatings with excellent uniformity,high-temperature electrical insulation,and adhesion properties.The fabricated Ag/Pt thin film thermocouple arrays and a heat flux sensor exhibit a maximum temperature resistance of up to 960℃,with thermoelectric potential outputs and hightemperature resistance closely mirroring those of wire-based Ag/Pt thermocouples.Harsh environmental testing was conducted using high-power lasers and a flame gun.The results show that the array of thin-film conformal thermocouples more accurately reflected temperature changes at different points on a spherical surface.The heat flux sensors achieve responses within 95 ms and with-stand environments with heat fluxes over 1.2 MW/m^(2).The proposed multi-sensor design and fabrication method offers promising monitoring applications in harsh environments,including aerospace and nuclear power.展开更多
In the fields of optoelectronics and semiconductors, reliable fixation and handling of brittle materials (glass, wafer, etc.) in high-temperature, vacuum, and vibration environments face particular technical challenge...In the fields of optoelectronics and semiconductors, reliable fixation and handling of brittle materials (glass, wafer, etc.) in high-temperature, vacuum, and vibration environments face particular technical challenges. These challenges include the inability of suction cups in a vacuum, the residue of chemical adhesives, and the easy damage of mechanical clamping. In this paper, fluorine-based bionic adhesive pads (FBAPs) obtained using molding technology to imitate gecko micropillar arrays are presented. FBAPs inhibit the substantial decay of adhesive properties at high temperatures and provide stable and reliable performance in vacuum and vibration environments. The results demonstrated that the decayed force values of the normal and tangential strength of the FBAP were only 9.01% and 5.82% of the planar samples when warmed up to 300℃ from 25℃, respectively. In a vacuum, all FBAPs exhibit less than 20% adhesion attenuation, and in a vibrational environment, they can withstand accelerations of at least 4.27 g. The design of the microstructure arrays enables the realization of efficient and non-destructive separation through mechanical rotation or blowing. It provides a bionic material basis for the fixation of brittle materials on smooth surfaces under complex environments and for transportation automation.展开更多
During the production processes of energy,metallurgy,chemical engineering,and other process industries,substantial high-temperature dustladen flue gas is generated.Asymmetric silicon carbide(SiC)membranes exhibit sign...During the production processes of energy,metallurgy,chemical engineering,and other process industries,substantial high-temperature dustladen flue gas is generated.Asymmetric silicon carbide(SiC)membranes exhibit significant potential in flue gas filtration since they enable direct filtration of high-temperature gas and facilitate thermal energy recovery.However,membrane particle penetration is a prevalent issue when constructing membrane layer directly on macroporous support,which contributes to a considerable mass transfer resistance.Herein,a novel hydrophobic modification strategy was developed to avoid the slurry penetration,thereby fabricating the asymmetric SiC membrane without the necessity of any intermediate or sacrificial layer.Firstly,the modifier concentration was adjusted to guarantee that the support was hydrophobic enough to prevent the slurry from penetrating.Subsequently,the slurry surface tension was fine-tuned by introducing ethanol to enhance the integrity of the SiC membrane.Furthermore,the effect of solid content was systematically investigated.It was demonstrated that the optimized SiC membranes obtained excellent gas permeance from 100.8 to 199.8 m^(3)·m^(-2)·h^(-1)·kPa^(-1)with the pore size ranging from 1.93 to 3.89μm.Also,the SiC membrane exhibited excellent stability for 24 h and achieved an excellent dust removal efficiency(99.99%)when filtering ultrafine dust particles(~300 nm)under high temperatures.This method effectively bridges the membrane particle penetration issue caused by the particle size disparity among different layers of the asymmetric membrane,establishing an efficient strategy to fabricate highpermeance SiC membranes applied in high-temperature dust-laden gas filtration.展开更多
In this study,the design,analysis,manufacturing,and testing of a 3D-printed conformal microstrip array antenna for high-temperature environments is presented.3D printing technology is used to fabricate a curved cerami...In this study,the design,analysis,manufacturing,and testing of a 3D-printed conformal microstrip array antenna for high-temperature environments is presented.3D printing technology is used to fabricate a curved ceramic substrate,and laser sintering and microdroplet spraying processes are used to add the conductive metal on the curved substrate.The problems of gain loss,bandwidth reduction,and frequency shift caused by high temperatures are addressed by using a proper antenna design,with parasitic patches,slots,and metal resonant cavities.The antenna prototype is characterized by the curved substrates and the conductive metals for the power dividers,the patch,and the ground plane;its performance is examined up to a temperature of 600℃in a muffle furnace and compared with the results from the numerical analysis.The results show that the antenna can effectively function at 600℃and even higher temperatures.展开更多
To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretre...To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.展开更多
A calcium zirconate crucible material with excellent performance was prepared by fixing the particle size proportion and exploring the addition of Y_(2)O_(3).The results show that Y^(3+)solid-dissolves into c-ZrO_(2)t...A calcium zirconate crucible material with excellent performance was prepared by fixing the particle size proportion and exploring the addition of Y_(2)O_(3).The results show that Y^(3+)solid-dissolves into c-ZrO_(2)to occupy the Zr^(4+)positions,leading to structural defects and promoting the sintering of calcium zirconate.Adding 0.5 wt.%Y_(2)O_(3)into calcium zirconate can enhance the modulus of rupture,reduce the thermal expansion coefficient,and improve the thermal shock resistance.Through high-temperature test,it is found that adding 0.5 wt.%Y_(2)O_(3)significantly improves the corrosion resistance of the sample.展开更多
Integrated environmental management is important for sustainable development.Under China’s“Three Lines One Permit”(TLOP)policy,three types of management zones—priority protection,critical control,and general contr...Integrated environmental management is important for sustainable development.Under China’s“Three Lines One Permit”(TLOP)policy,three types of management zones—priority protection,critical control,and general control zones—are established based on the ecological red line,the lower-limit line for environmental quality,and the resource use line.Human activities are regulated through a permit system.Integrated and multifactorial protection of soil,plant,hydrological,and atmospheric elements is promoted at the regional level.A follow-up assessment contributes to the improvement of policy implementation and effectiveness.This study demonstrates the achievements of the TLOP policy in Sichuan Province.Results show that(1)276 protection zones have been established under the ecological red line,covering key ecosystems and protected areas to ensure environmental security.Under the lower-limit line,1,626 functional(priority,key,and general control)zones have been designated to regulate air,water,and soil quality,enhancing environmental capacity and pollution control.(2)Through the integration and merging of the three lines,1,128 integrated management zones have been established,including 375,625,and 128 priority protection,critical control,and general control zones,respectively.Each zone has its own list of environmental permits to regulate human activities according to different environmental protection and natural resource development regimes.(3)The design of the follow-up assessment index system was informed by regional primary functions and industrial structure.The index system for provinces and cities is structured around three primary indicators—implementation updating,application,and guarantees—and 15 secondary indicators.The system for critical control zones is structured around environmental access,management,and effectiveness and 14 secondary indicators.A stringent environmental zoning system has been established through the TLOP policy,thereby safeguarding environmental security,promoting harmonious existence between humans and nature,and supporting the vision of Beautiful China.展开更多
The accelerating impacts of climate change,rising temperatures,extreme weather events,and biodiversity loss underscore the urgent need for widespread public awareness.This research explores why climate change awarenes...The accelerating impacts of climate change,rising temperatures,extreme weather events,and biodiversity loss underscore the urgent need for widespread public awareness.This research explores why climate change awareness is not just beneficial but essential for effective environmental stewardship and the long-term health of our planet.The research proffers informed communities,encouraging sustainable practices,and driving policy advocacy,awareness serves as a model for collective action.This call to consciousness challenges individuals,institutions,and nations to recognize their role in shaping a resilient,sustainable future for the Earth.Methodology adopted in this research is a mixed-method design,involving both qualitative and quasi-experimental designs,which engages the use of focus group discussions and oral interviews to explore deeper insights into perceptions,biodiversity loss consciousness,and environmental depletion challenges.Also,applicable under the qualitative method is the secondary data collection mode,namely,reports from IPCC,government policy documents,and existing literature related to the context of the research.The empirical and scientific data analysis was presented from the data collected and was coded and subjected to analysis using a paired samples t-test.The study is grounded on the theory of“Value-Belief-Norm”(VBN)developed by Stern et al.The VBN theory posits that individuals are more likely to engage in pro-environmental behaviour when their values(especially biosphere and altruistic),beliefs(about environmental consequences),and norms(personal responsibility to act)align.The findings of this study underscore the critical role of climate change awareness in fostering environmental and earth stewardship.The paper recommends that Governments of the country(State and federal)should take urgent steps in sensitising the general public on the causes and impact of climate change.展开更多
The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical pr...The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical properties,can significantly enhance the oxidation resistance of Mg alloys.Based on our previous study,we conclude that REs such as Gd,Y,and Ce enhance the oxidation resistance of Mg-RE alloys.This article comprehensively reviews recent research progress on high-temperature oxidation behavior and the potential mechanism in Mg-RE alloys.Based on the thermodynamic and kinetic analyses,the evolution of the complex oxide system formed during the high-temperature oxidation of Mg-RE alloys is first summarized.The diffusion behavior and concentration control mechanisms of REs during the oxidation process and how these mechanisms affect the sustained growth of the oxide film and antioxidant properties were elucidated.Moreover,the different structures of the oxide films were classified,and their properties were discussed.Finally,this paper introduces the applications of commonly used REs in Mg alloys and frontier research on their oxidation mechanisms.Based on the above review,we propose that future research perspectives can be explored in terms of expanding the experimental temperature range for oxidation tests,optimizing the chemical composition by adding trace REs to study their synergistic mechanism,revealing the underlying oxidation mechanism through advanced in situ microscopic characterization methods,and investigating the mechanical properties of oxide films using diverse approaches.展开更多
Starting from the foundational static traits underlying the growth and development of flue-cured tobacco, this research conducts a systematic examination of the phenomena and theoretical principles associated with env...Starting from the foundational static traits underlying the growth and development of flue-cured tobacco, this research conducts a systematic examination of the phenomena and theoretical principles associated with environment-driven adaptive changes during its cultivation. It was found that environmental variables-including temperature, light, and moisture-elicit directional shifts in static traits ( e.g. , chemical composition, morphological architecture, and leaf tissue structure) toward enhanced environmental adaptation, characterized by graduality, juvenility, similarity, and correlativity. Upon alterations in ambient conditions, flue-cured tobacco modulates its static traits through integrated physical, chemical, and biological-genetic mechanisms, aiming to optimize resource utilization, mitigate environmental constraints, and preserve internal homeostasis alongside metabolic balance. The investigation further reveals that the adaptive scope of flue-cured tobacco to field environments is malleable and can be extended and elevated via adaptive conditioning commencing at the juvenile stage. In addition, the adaptive alignment between static traits and environmental parameters exerts a substantial impact on the plant s growth dynamics, yield performance, and quality attributes. Beyond its relevance to flue-cured tobacco, the proposed theory offers a meaningful framework for elucidating the pervasive adaptive strategies employed by plants and broader biological systems in response to environmental contingencies.展开更多
TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing Ti...TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing TiB_(2)coatings have disadvantages such as high equipment costs,complicated processes,and highly toxic gas emissions.This paper proposes an environmentally friendly method,which requires inexpensive equipment and simple processing,for preparing TiB_(2)coating on molybdenum via electrophoretic deposition within Na3AlF6-based molten salts.The produced TiB_(2)layer had an approximate thickness of 60μm and exhibited high density,outstanding hardness(38.2 GPa)and robust adhesion strength(51 N).Additionally,high-temperature oxidation experiments revealed that,at900℃,the TiB_(2)coating provided effective protection to the molybdenum substrate against oxidation for 3 h.This result indicates that the TiB_(2)coating prepared on molybdenum using molten salt electrophoretic deposition possesses good high-temperature oxidation resistance.展开更多
The coastal regions of southern China experience the country's most frequent convective weather.Accurately representing the low-level upstream atmospheric state over the data-sparse South China Sea(SCS)is crucial ...The coastal regions of southern China experience the country's most frequent convective weather.Accurately representing the low-level upstream atmospheric state over the data-sparse South China Sea(SCS)is crucial for reliable convection predictions in numerical models.Utilizing 10 years of radiosonde observations launched over the SCS,this study presents the upstream offshore convective environments and evaluates the global model data performance including NCEP FNL,ERA5,CRA-40,JRA-3Q,and MERRA-2.Results show that thermodynamic state variables such as temperature and humidity exhibit greater biases than kinetic variables,particularly at low levels.Deeper-layer parameters exhibit smaller uncertainties,especially wind-related variables,while moisture-related parameters have the largest uncertainties,compared to shallower-layer parameters.All model data tend to underestimate the conditional instability and equilibrium level,while overestimating the condensation level,storm relative helicity(SRH),with minimal bias in lapse rate,convective inhibition,vertical wind shear(VWS),and mean winds.These biases primarily arise from the model data's underestimation of temperature and moisture below 700 hPa and lower wind speeds below 950 hPa.Among the global models,CRA-40 performs best in dynamic parameters,with highest correlation and lowest mean absolute error in low-level winds,SRH,VWS,and mean winds.ERA5 excels in thermodynamic parameters.Additional convective-permitting numerical experiments indicate that minor initial condition errors over the upstream ocean significantly affect coastal rainfall production.The rainfall production on windward coasts is most sensitive to the low-level air temperature errors during nocturnal hours,while the rainfall over the PRD is most sensitive to the low-level wind errors.展开更多
In the context of the revolution in new technologies,a key question is whether the rapid growth of the digital economy,driven by digital technologies,has improved regional innovation performance.Using inter-provincial...In the context of the revolution in new technologies,a key question is whether the rapid growth of the digital economy,driven by digital technologies,has improved regional innovation performance.Using inter-provincial panel data from China(2012–2022)and adopting a business environment perspective,this study applies a Panel Extended Regression Model(PERM),a Panel Simultaneous Equation Model(PSEM),and a Tobit-IV model to analyze how the development of the digital economy influences regional innovation.The results reveal a pronounced U-shaped relationship between the digital economy and the regional innovation performance at the provincial level in China,with the business environment serving as a significant mediator in this relationship.Moreover,regional innovation performance in China exhibits a“ratchet effect,”with the impact of the digital economy varying markedly across regions.While the eastern and western regions have entered an upward phase,whereby the digital economy boosts innovation,the central region displays a weaker effect.Further analysis indicates that the synergy between the business environment and the digital economy in driving innovation remains suboptimal.These findings were supported by robust checks.This study offers theoretical insights and empirical evidence that support the coordinated development of digital government and the digital factor market,as well as business environment reforms that are in alignment with the innovation demands of the digital era.展开更多
The development of infrared engineering technologies for extreme environments remains a formidable challenge due to the inherent trade-offs among optical performance,thermal stability,and mechanical integrity in therm...The development of infrared engineering technologies for extreme environments remains a formidable challenge due to the inherent trade-offs among optical performance,thermal stability,and mechanical integrity in thermal photonic metamaterials(TPMs).This work introduces a novel multi-obj ective design framework and demonstrates the design,fabrication,and validation of a TPM operating under extreme temperatures up to 1873 K.We have established a holistic design framework integrating temperaturedependent neural network and Pareto multi-obj ective optimization to co-optimize spectral response,component light-weighting,and structural efficiency.The framework achieves 100 times faster computation than genetic algorithms.The performance of the designed TPM was evaluated under various atmospheric models and detection distances.The TPM achieved a peak radiance suppression efficiency of 82%and a maximum attenuation of-7.4 dB at 1200-1500 K.Experimentally,we fabricated an all-dielectric TPM using a refractory TiO_(2)/BeO multilayer stack with only 5 layers and 2um total thickness.The optimized structure shows high reflectivity(0.62 at 3-5 um;0.48 at 8-14μm)for radiative suppression and high emissivity(0.87 at 5-8μm)for radiative cooling.The TPM withstands 1873 K for 12 h in air with less than 3%spectral drift,retaining excellent mechanical properties.On high-temperature components,it achieves 40-50%radiative suppression and 40-60 K(~10.1 kW m^(-2))radiative cooling at 1100 K,endures over 20 times thermal shock cycles(>150 K s^(-1),700-1500 K),and maintains stable performance over 5 cycles,with 78%visible and 98%microwave transmittance.This work establishes a new paradigm in the design and application of photonic materials for extreme environments.展开更多
Driven by rapid advances in deep learning,object detection has been widely adopted across diverse application scenarios.However,in low-light conditions,critical visual cues of target objects are severely degraded,posi...Driven by rapid advances in deep learning,object detection has been widely adopted across diverse application scenarios.However,in low-light conditions,critical visual cues of target objects are severely degraded,posing a significant challenge for accurate low-light object detection.Existing methods struggle to preserve discriminative features while maintaining semantic consistency between low-light and normal-light images.For this purpose,this study proposes a DL-YOLO model specially tailored for low-light detection.To mitigate target feature attenuation introduced by repeated downsampling,we design aMulti-Scale FeatureConvolution(MSF-Conv)module that captures rich,multi-level details via multi-scale feature learning,thereby reducing model complexity and computational cost.For feature fusion,we integrated the C3k2-DWRmodule by embedding the Dilation-wise Residual(DWR)mechanism into the 2-core optimized Cross Stage Partial(C3)framework,achieving efficient feature integration.In addition,we replace conventional localization losses with WIoU(Weighted Intersection over Union),which dynamically adjusts gradient gain according to sample quality,thereby improving localization robustness and precision.Experiments on the ExDark dataset demonstrate that DL-YOLO delivers strong low-light detection performance.The relevant code is published at https://github.com/cym0997/DL-YOLO.展开更多
In fire rescue scenarios,traditional manual operations are highly dangerous,as dense smoke,low visibility,extreme heat,and toxic gases not only hinder rescue efficiency but also endanger firefighters’safety.Although ...In fire rescue scenarios,traditional manual operations are highly dangerous,as dense smoke,low visibility,extreme heat,and toxic gases not only hinder rescue efficiency but also endanger firefighters’safety.Although intelligent rescue robots can enter hazardous environments in place of humans,smoke poses major challenges for human detection algorithms.These challenges include the attenuation of visible and infrared signals,complex thermal fields,and interference frombackground objects,all ofwhichmake it difficult to accurately identify trapped individuals.To address this problem,we propose VIF-YOLO,a visible–infrared fusion model for real-time human detection in dense smoke environments.The framework introduces a lightweight multimodal fusion(LMF)module based on learnable low-rank representation blocks to end-to-end integrate visible and infrared images,preserving fine details while enhancing salient features.In addition,an efficient multiscale attention(EMA)mechanism is incorporated into the YOLOv10n backbone to improve feature representation under low-light conditions.Extensive experiments on our newly constructedmultimodal smoke human detection(MSHD)dataset demonstrate thatVIF-YOLOachievesmAP50 of 99.5%,precision of 99.2%,and recall of 99.3%,outperforming YOLOv10n by a clear margin.Furthermore,when deployed on the NVIDIA Jetson Xavier NX,VIF-YOLO attains 40.6 FPS with an average inference latency of 24.6 ms,validating its real-time capability on edge-computing platforms.These results confirm that VIF-YOLO provides accurate,robust,and fast detection across complex backgrounds and diverse smoke conditions,ensuring reliable and rapid localization of individuals in need of rescue.展开更多
Objectives This study aimed to explore and clarify the concept of reflective supervision as a professional self-care strategy to create a positive Intensive Care Unit(ICU)practice environment.Methods Walker and Avant...Objectives This study aimed to explore and clarify the concept of reflective supervision as a professional self-care strategy to create a positive Intensive Care Unit(ICU)practice environment.Methods Walker and Avant’s eight-step concept analysis approach was utilized to identify and define the attributes,antecedents,and consequences of reflective supervision in the ICU.An extensive literature search was conducted across various databases,including Google Scholar,CINAHL,PubMed.Articles published from 2005 to 2025 were identified.We followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses(PRISMA)2020 statement to indicate the included articles and extract related data based on relevance.Results Forty articles were included in the analysis.The identified attributes included the supervisor-supervisee relationship,effective communication,teamwork,collaborations,reflection,competencies,feedback,continuous support,and autonomous choice.The identified antecedents included participation,supportive supervision,flexibility,open-door policy,training,and motivation.Consequences impacting the success of reflective supervision were identified as promotion of resiliency,autonomy,work-life balance,self-awareness,increased self-esteem,professional development,critical thinking,increased job satisfaction,and enhanced commitment.Conclusions Reflective supervision is a complex professional self-care strategy that enhances ICU practice,by promoting nurses’well-being,self-awareness,therapeutic skills,and professional development.展开更多
文摘Valve-regulated-lead-acid (VRLA) battery charging performed in high-temperature environments is extremely risky under overcharge conditions, and may lead to a subsequent thermal runaway. A new pressure-controlled charging method was adopted and the charging characteristics of the pressure-controlled VRLA battery in high-temperature environments were ex-perimentally studied. The concept was tested in a large temperature gradient to obtain more details about the effects of users' accustomed charging and discharging modes on battery capacity. The premature capacity loss (PCL) phenomenon under high temperature exposure was analyzed. The results showed that the capacity loss could be recovered by charging using a large current.
基金Supported by Hunan Province Science and Technology(2007FJ1012)the Scientific Research Fund of Hunan Provincial Education Department(09CY014)Doctoral Fund of HNUST
文摘In order to improve the thermal environment of high-temperature heading face,moisture content of supply air is reduced by dehumidification, and the relative humidity ofenvironment air of the heading face is also decreased.First, according to the coefficient ofperformance of dehumidifier, the capacity of dehumidification was calculated.Second, inthe engineering example of the heading face, quantitative changes of WBGT (Wet BulbGlobe Temperature) were compared between with dehumidification and without dehumidification.Based on WBGT standards, the thermal comfort of high-temperature environmentof heading face was evaluated between with dehumidification and without handling.Reducingthe relative humidity of airflow through dehumidification, the thermal comfort of ahigh-temperature environment of heading face can improve greatly.Even if dry bulb temperatureof airflow is not decreased, the thermal comfort of heading face environment isalso improved to some extent.
文摘Theaim of the present work wasto analyze moisture flow and moisture content data for high-temperature drying by usingan advanced image- processing algorithm.Since wood starts to shrink below the fibre saturation point during drying, the size and shape of wood will change. The dry wood image was thoroughly transformed to the shape of the wet wood image prior to calculating the dry weight moisture content. The use of the image- processing algorithm for the dry weight moisture content on density data from the CT-scanning during drying in a controlled high-temperature environment showed that this method is a powerful tool for analyzing the moisture flow inside the wood piece. Furthermore, the new CT-scanner together with the climate chamber gave unique results, as it has not been possible to study high-temperature drying with this method before.
基金supported by the National Key Research and Development Program of China(No.2022YFB3203900)。
文摘Conformal thin-film sensors enable precise monitoring of the operating conditions of components in extreme environments.However,the development of these sensors encounters major challenges,especially in uniformly applying multiple film layers on complex metallic surfaces and accurately capturing diverse operational parameters.This work reports a multi-sensor design and multi-layer additive manufacturing process targeting spherical metallic substrates.The proposed high-temperature dip-coating and self-leveling fabrication process achieves high-temperature thin-film coatings with excellent uniformity,high-temperature electrical insulation,and adhesion properties.The fabricated Ag/Pt thin film thermocouple arrays and a heat flux sensor exhibit a maximum temperature resistance of up to 960℃,with thermoelectric potential outputs and hightemperature resistance closely mirroring those of wire-based Ag/Pt thermocouples.Harsh environmental testing was conducted using high-power lasers and a flame gun.The results show that the array of thin-film conformal thermocouples more accurately reflected temperature changes at different points on a spherical surface.The heat flux sensors achieve responses within 95 ms and with-stand environments with heat fluxes over 1.2 MW/m^(2).The proposed multi-sensor design and fabrication method offers promising monitoring applications in harsh environments,including aerospace and nuclear power.
基金supported by the National Natural Science Foundation of China(No.52075249)the Tianyuan Laboratory Fund(No.24-JSKY-ZZKT-14).
文摘In the fields of optoelectronics and semiconductors, reliable fixation and handling of brittle materials (glass, wafer, etc.) in high-temperature, vacuum, and vibration environments face particular technical challenges. These challenges include the inability of suction cups in a vacuum, the residue of chemical adhesives, and the easy damage of mechanical clamping. In this paper, fluorine-based bionic adhesive pads (FBAPs) obtained using molding technology to imitate gecko micropillar arrays are presented. FBAPs inhibit the substantial decay of adhesive properties at high temperatures and provide stable and reliable performance in vacuum and vibration environments. The results demonstrated that the decayed force values of the normal and tangential strength of the FBAP were only 9.01% and 5.82% of the planar samples when warmed up to 300℃ from 25℃, respectively. In a vacuum, all FBAPs exhibit less than 20% adhesion attenuation, and in a vibrational environment, they can withstand accelerations of at least 4.27 g. The design of the microstructure arrays enables the realization of efficient and non-destructive separation through mechanical rotation or blowing. It provides a bionic material basis for the fixation of brittle materials on smooth surfaces under complex environments and for transportation automation.
基金Financial support was provided by the National Natural Science Foundation of China(22325804,22578197)National Key Research and Development Project of China(2021YFB3801302,2022YFC3900300)+1 种基金Jiangsu Future Membrane Technology Innovation Center(No.BM2021804)Natural Science Foundation of Jiangsu Higher Education Institutions of China(No.25KJA530003).
文摘During the production processes of energy,metallurgy,chemical engineering,and other process industries,substantial high-temperature dustladen flue gas is generated.Asymmetric silicon carbide(SiC)membranes exhibit significant potential in flue gas filtration since they enable direct filtration of high-temperature gas and facilitate thermal energy recovery.However,membrane particle penetration is a prevalent issue when constructing membrane layer directly on macroporous support,which contributes to a considerable mass transfer resistance.Herein,a novel hydrophobic modification strategy was developed to avoid the slurry penetration,thereby fabricating the asymmetric SiC membrane without the necessity of any intermediate or sacrificial layer.Firstly,the modifier concentration was adjusted to guarantee that the support was hydrophobic enough to prevent the slurry from penetrating.Subsequently,the slurry surface tension was fine-tuned by introducing ethanol to enhance the integrity of the SiC membrane.Furthermore,the effect of solid content was systematically investigated.It was demonstrated that the optimized SiC membranes obtained excellent gas permeance from 100.8 to 199.8 m^(3)·m^(-2)·h^(-1)·kPa^(-1)with the pore size ranging from 1.93 to 3.89μm.Also,the SiC membrane exhibited excellent stability for 24 h and achieved an excellent dust removal efficiency(99.99%)when filtering ultrafine dust particles(~300 nm)under high temperatures.This method effectively bridges the membrane particle penetration issue caused by the particle size disparity among different layers of the asymmetric membrane,establishing an efficient strategy to fabricate highpermeance SiC membranes applied in high-temperature dust-laden gas filtration.
基金National Natural Science Foundation of China(No.U2241205)the Natural Science Basic Research Program of Shaanxi(Nos.2022JC-33,2023-GHZD-35,and 2024JC-ZDXM-25)+1 种基金the Fundamental Research Funds for the Central Universitiesthe National 111 Project to provide fund for conducting experiments。
文摘In this study,the design,analysis,manufacturing,and testing of a 3D-printed conformal microstrip array antenna for high-temperature environments is presented.3D printing technology is used to fabricate a curved ceramic substrate,and laser sintering and microdroplet spraying processes are used to add the conductive metal on the curved substrate.The problems of gain loss,bandwidth reduction,and frequency shift caused by high temperatures are addressed by using a proper antenna design,with parasitic patches,slots,and metal resonant cavities.The antenna prototype is characterized by the curved substrates and the conductive metals for the power dividers,the patch,and the ground plane;its performance is examined up to a temperature of 600℃in a muffle furnace and compared with the results from the numerical analysis.The results show that the antenna can effectively function at 600℃and even higher temperatures.
基金National Natural Science Foundation of China(52071274)Key Research and Development Projects of Shaanxi Province(2023-YBGY-442)Science and Technology Nova Project-Innovative Talent Promotion Program of Shaanxi Province(2020KJXX-062)。
文摘To mitigate the impact of interdiffusion reactions between the silicide slurry and Ta12W alloy substrate during vacuum sintering process on the oxidation resistance of the silicide coating,a micro-arc oxidation pretreatment was employed to construct a Ta_(2)O_(5)ceramic layer on the Ta12W alloy surface.Subsequently,a slurry spraying-vacuum sintering method was used to prepare a Si-Cr-Ti-Zr coating on the pretreated substrate.Comparative studies were conducted on the microstructure,phase composition,and isothermal oxidation resistance(at 1600℃)of the as-prepared coatings with and without the micro-arc oxidation ceramic layer.The results show that the Ta_(2)O_(5)layer prepared at 400 V is more continuous and has smaller pores than that prepared at 350 V.After microarc oxidation pretreatment,the Si-Cr-Ti-Zr coating on Ta12W alloy consists of three distinct layers:an upper layer dominated by Ti_(5)Si_(3),Ta_(5)Si_(3),and ZrSi;a middle layer dominated by TaSi_(2);a coating/substrate interfacial reaction layer dominated by Ta_(5)Si_(3).Both the Si-Cr-Ti-Zr coatings with and without the Ta_(2)O_(5)ceramic layer do not fail after isothermal oxidation at 1600℃for 5 h.Notably,the addition of the Ta2O5 ceramic layer reduces the high-temperature oxidation rate of the coating.
基金provided by the National Natural Science Foundation of China(NSFC)through the Joint Fund Project(No.U24A202815)the Youth Science Fund Project(No.52302031).
文摘A calcium zirconate crucible material with excellent performance was prepared by fixing the particle size proportion and exploring the addition of Y_(2)O_(3).The results show that Y^(3+)solid-dissolves into c-ZrO_(2)to occupy the Zr^(4+)positions,leading to structural defects and promoting the sintering of calcium zirconate.Adding 0.5 wt.%Y_(2)O_(3)into calcium zirconate can enhance the modulus of rupture,reduce the thermal expansion coefficient,and improve the thermal shock resistance.Through high-temperature test,it is found that adding 0.5 wt.%Y_(2)O_(3)significantly improves the corrosion resistance of the sample.
基金supported by the National Natural Science Foundation of China(grant numbers 42171085)and the National Key R&D Program of China(Grant No.2024YFF1307801,2024YFF1307804).
文摘Integrated environmental management is important for sustainable development.Under China’s“Three Lines One Permit”(TLOP)policy,three types of management zones—priority protection,critical control,and general control zones—are established based on the ecological red line,the lower-limit line for environmental quality,and the resource use line.Human activities are regulated through a permit system.Integrated and multifactorial protection of soil,plant,hydrological,and atmospheric elements is promoted at the regional level.A follow-up assessment contributes to the improvement of policy implementation and effectiveness.This study demonstrates the achievements of the TLOP policy in Sichuan Province.Results show that(1)276 protection zones have been established under the ecological red line,covering key ecosystems and protected areas to ensure environmental security.Under the lower-limit line,1,626 functional(priority,key,and general control)zones have been designated to regulate air,water,and soil quality,enhancing environmental capacity and pollution control.(2)Through the integration and merging of the three lines,1,128 integrated management zones have been established,including 375,625,and 128 priority protection,critical control,and general control zones,respectively.Each zone has its own list of environmental permits to regulate human activities according to different environmental protection and natural resource development regimes.(3)The design of the follow-up assessment index system was informed by regional primary functions and industrial structure.The index system for provinces and cities is structured around three primary indicators—implementation updating,application,and guarantees—and 15 secondary indicators.The system for critical control zones is structured around environmental access,management,and effectiveness and 14 secondary indicators.A stringent environmental zoning system has been established through the TLOP policy,thereby safeguarding environmental security,promoting harmonious existence between humans and nature,and supporting the vision of Beautiful China.
文摘The accelerating impacts of climate change,rising temperatures,extreme weather events,and biodiversity loss underscore the urgent need for widespread public awareness.This research explores why climate change awareness is not just beneficial but essential for effective environmental stewardship and the long-term health of our planet.The research proffers informed communities,encouraging sustainable practices,and driving policy advocacy,awareness serves as a model for collective action.This call to consciousness challenges individuals,institutions,and nations to recognize their role in shaping a resilient,sustainable future for the Earth.Methodology adopted in this research is a mixed-method design,involving both qualitative and quasi-experimental designs,which engages the use of focus group discussions and oral interviews to explore deeper insights into perceptions,biodiversity loss consciousness,and environmental depletion challenges.Also,applicable under the qualitative method is the secondary data collection mode,namely,reports from IPCC,government policy documents,and existing literature related to the context of the research.The empirical and scientific data analysis was presented from the data collected and was coded and subjected to analysis using a paired samples t-test.The study is grounded on the theory of“Value-Belief-Norm”(VBN)developed by Stern et al.The VBN theory posits that individuals are more likely to engage in pro-environmental behaviour when their values(especially biosphere and altruistic),beliefs(about environmental consequences),and norms(personal responsibility to act)align.The findings of this study underscore the critical role of climate change awareness in fostering environmental and earth stewardship.The paper recommends that Governments of the country(State and federal)should take urgent steps in sensitising the general public on the causes and impact of climate change.
基金supported by the Key R&D Program of Shandong Province,China(No.2025CXGC 010412)the National Key Research and Development Program of China(No.2022YFB3709300)the National Natural Science Foundation of China(No.U21A2048).
文摘The limited high-temperature oxidation resistance of Mg alloys is a key factor restricting their development and application.The addition of some rare earth elements(REs),owing to their unique physical and chemical properties,can significantly enhance the oxidation resistance of Mg alloys.Based on our previous study,we conclude that REs such as Gd,Y,and Ce enhance the oxidation resistance of Mg-RE alloys.This article comprehensively reviews recent research progress on high-temperature oxidation behavior and the potential mechanism in Mg-RE alloys.Based on the thermodynamic and kinetic analyses,the evolution of the complex oxide system formed during the high-temperature oxidation of Mg-RE alloys is first summarized.The diffusion behavior and concentration control mechanisms of REs during the oxidation process and how these mechanisms affect the sustained growth of the oxide film and antioxidant properties were elucidated.Moreover,the different structures of the oxide films were classified,and their properties were discussed.Finally,this paper introduces the applications of commonly used REs in Mg alloys and frontier research on their oxidation mechanisms.Based on the above review,we propose that future research perspectives can be explored in terms of expanding the experimental temperature range for oxidation tests,optimizing the chemical composition by adding trace REs to study their synergistic mechanism,revealing the underlying oxidation mechanism through advanced in situ microscopic characterization methods,and investigating the mechanical properties of oxide films using diverse approaches.
基金Supported by Changsha Tobacco Company Science and Technology Project(2020-2024A04).
文摘Starting from the foundational static traits underlying the growth and development of flue-cured tobacco, this research conducts a systematic examination of the phenomena and theoretical principles associated with environment-driven adaptive changes during its cultivation. It was found that environmental variables-including temperature, light, and moisture-elicit directional shifts in static traits ( e.g. , chemical composition, morphological architecture, and leaf tissue structure) toward enhanced environmental adaptation, characterized by graduality, juvenility, similarity, and correlativity. Upon alterations in ambient conditions, flue-cured tobacco modulates its static traits through integrated physical, chemical, and biological-genetic mechanisms, aiming to optimize resource utilization, mitigate environmental constraints, and preserve internal homeostasis alongside metabolic balance. The investigation further reveals that the adaptive scope of flue-cured tobacco to field environments is malleable and can be extended and elevated via adaptive conditioning commencing at the juvenile stage. In addition, the adaptive alignment between static traits and environmental parameters exerts a substantial impact on the plant s growth dynamics, yield performance, and quality attributes. Beyond its relevance to flue-cured tobacco, the proposed theory offers a meaningful framework for elucidating the pervasive adaptive strategies employed by plants and broader biological systems in response to environmental contingencies.
基金supported by the Original Exploratory Program of the National Natural Science Foundation of China(No.52450012)。
文摘TiB_(2)coatings can significantly enhance the high-temperature oxidation resistance of molybdenum,which would broaden the application range of molybdenum and alloys thereof.However,traditional methods for preparing TiB_(2)coatings have disadvantages such as high equipment costs,complicated processes,and highly toxic gas emissions.This paper proposes an environmentally friendly method,which requires inexpensive equipment and simple processing,for preparing TiB_(2)coating on molybdenum via electrophoretic deposition within Na3AlF6-based molten salts.The produced TiB_(2)layer had an approximate thickness of 60μm and exhibited high density,outstanding hardness(38.2 GPa)and robust adhesion strength(51 N).Additionally,high-temperature oxidation experiments revealed that,at900℃,the TiB_(2)coating provided effective protection to the molybdenum substrate against oxidation for 3 h.This result indicates that the TiB_(2)coating prepared on molybdenum using molten salt electrophoretic deposition possesses good high-temperature oxidation resistance.
基金supported by the National Natural Science Foundation of China(Grant Nos.42030610,42275006,41805035,and 42305001)the Guangdong Basic and Applied Basic Research Foundation(Grant No.2024A1515030210)+2 种基金the Guangdong Provincial Marine Meteorology Science Data Center(Grant No.2024B1212070014)the Open Project of the Xiamen Key Laboratory of Straits Meteorology(Grant Nos.HXQX202304 and 2024KF02)the Key Innovation Team of the China Meteorological Administration(Grant No.CMA2023ZD08)。
文摘The coastal regions of southern China experience the country's most frequent convective weather.Accurately representing the low-level upstream atmospheric state over the data-sparse South China Sea(SCS)is crucial for reliable convection predictions in numerical models.Utilizing 10 years of radiosonde observations launched over the SCS,this study presents the upstream offshore convective environments and evaluates the global model data performance including NCEP FNL,ERA5,CRA-40,JRA-3Q,and MERRA-2.Results show that thermodynamic state variables such as temperature and humidity exhibit greater biases than kinetic variables,particularly at low levels.Deeper-layer parameters exhibit smaller uncertainties,especially wind-related variables,while moisture-related parameters have the largest uncertainties,compared to shallower-layer parameters.All model data tend to underestimate the conditional instability and equilibrium level,while overestimating the condensation level,storm relative helicity(SRH),with minimal bias in lapse rate,convective inhibition,vertical wind shear(VWS),and mean winds.These biases primarily arise from the model data's underestimation of temperature and moisture below 700 hPa and lower wind speeds below 950 hPa.Among the global models,CRA-40 performs best in dynamic parameters,with highest correlation and lowest mean absolute error in low-level winds,SRH,VWS,and mean winds.ERA5 excels in thermodynamic parameters.Additional convective-permitting numerical experiments indicate that minor initial condition errors over the upstream ocean significantly affect coastal rainfall production.The rainfall production on windward coasts is most sensitive to the low-level air temperature errors during nocturnal hours,while the rainfall over the PRD is most sensitive to the low-level wind errors.
基金National Social Science Fund of China(18KXS009)the Sichuan Provincial Soft Science Program(22JDR0261)the Sichuan University“From 0 to 1”Innovation Research Program(2021CXC10)。
文摘In the context of the revolution in new technologies,a key question is whether the rapid growth of the digital economy,driven by digital technologies,has improved regional innovation performance.Using inter-provincial panel data from China(2012–2022)and adopting a business environment perspective,this study applies a Panel Extended Regression Model(PERM),a Panel Simultaneous Equation Model(PSEM),and a Tobit-IV model to analyze how the development of the digital economy influences regional innovation.The results reveal a pronounced U-shaped relationship between the digital economy and the regional innovation performance at the provincial level in China,with the business environment serving as a significant mediator in this relationship.Moreover,regional innovation performance in China exhibits a“ratchet effect,”with the impact of the digital economy varying markedly across regions.While the eastern and western regions have entered an upward phase,whereby the digital economy boosts innovation,the central region displays a weaker effect.Further analysis indicates that the synergy between the business environment and the digital economy in driving innovation remains suboptimal.These findings were supported by robust checks.This study offers theoretical insights and empirical evidence that support the coordinated development of digital government and the digital factor market,as well as business environment reforms that are in alignment with the innovation demands of the digital era.
基金supported by National Key Research and Development Program of China(2024YFA1210500,2023YFB4606105)Fundamental Research Center Projects(52488301)of National Natural Science Foundation of China(NSFC)+1 种基金Key Research Program of Frontier Sciences(ZDBS-LYJSC030)of Chinese Academy of SciencesWestern Light Program(xbzg-zdsys-202402)of Chinese Academy of Sciences。
文摘The development of infrared engineering technologies for extreme environments remains a formidable challenge due to the inherent trade-offs among optical performance,thermal stability,and mechanical integrity in thermal photonic metamaterials(TPMs).This work introduces a novel multi-obj ective design framework and demonstrates the design,fabrication,and validation of a TPM operating under extreme temperatures up to 1873 K.We have established a holistic design framework integrating temperaturedependent neural network and Pareto multi-obj ective optimization to co-optimize spectral response,component light-weighting,and structural efficiency.The framework achieves 100 times faster computation than genetic algorithms.The performance of the designed TPM was evaluated under various atmospheric models and detection distances.The TPM achieved a peak radiance suppression efficiency of 82%and a maximum attenuation of-7.4 dB at 1200-1500 K.Experimentally,we fabricated an all-dielectric TPM using a refractory TiO_(2)/BeO multilayer stack with only 5 layers and 2um total thickness.The optimized structure shows high reflectivity(0.62 at 3-5 um;0.48 at 8-14μm)for radiative suppression and high emissivity(0.87 at 5-8μm)for radiative cooling.The TPM withstands 1873 K for 12 h in air with less than 3%spectral drift,retaining excellent mechanical properties.On high-temperature components,it achieves 40-50%radiative suppression and 40-60 K(~10.1 kW m^(-2))radiative cooling at 1100 K,endures over 20 times thermal shock cycles(>150 K s^(-1),700-1500 K),and maintains stable performance over 5 cycles,with 78%visible and 98%microwave transmittance.This work establishes a new paradigm in the design and application of photonic materials for extreme environments.
文摘Driven by rapid advances in deep learning,object detection has been widely adopted across diverse application scenarios.However,in low-light conditions,critical visual cues of target objects are severely degraded,posing a significant challenge for accurate low-light object detection.Existing methods struggle to preserve discriminative features while maintaining semantic consistency between low-light and normal-light images.For this purpose,this study proposes a DL-YOLO model specially tailored for low-light detection.To mitigate target feature attenuation introduced by repeated downsampling,we design aMulti-Scale FeatureConvolution(MSF-Conv)module that captures rich,multi-level details via multi-scale feature learning,thereby reducing model complexity and computational cost.For feature fusion,we integrated the C3k2-DWRmodule by embedding the Dilation-wise Residual(DWR)mechanism into the 2-core optimized Cross Stage Partial(C3)framework,achieving efficient feature integration.In addition,we replace conventional localization losses with WIoU(Weighted Intersection over Union),which dynamically adjusts gradient gain according to sample quality,thereby improving localization robustness and precision.Experiments on the ExDark dataset demonstrate that DL-YOLO delivers strong low-light detection performance.The relevant code is published at https://github.com/cym0997/DL-YOLO.
基金funded by the National Natural Science Foundation of China under Grant 62306128the Leading Innovation Project of Changzhou Science and Technology Bureau underGrant CQ20230072+2 种基金the Basic Science Research Project of Jiangsu Provincial Department of Education under Grant 23KJD520003the Science and Technology Development Plan Project of Jilin Provinceunder Grant 20240101382JCthe National KeyR esearch and Development Program of China under Grant 2023YFF1105102.
文摘In fire rescue scenarios,traditional manual operations are highly dangerous,as dense smoke,low visibility,extreme heat,and toxic gases not only hinder rescue efficiency but also endanger firefighters’safety.Although intelligent rescue robots can enter hazardous environments in place of humans,smoke poses major challenges for human detection algorithms.These challenges include the attenuation of visible and infrared signals,complex thermal fields,and interference frombackground objects,all ofwhichmake it difficult to accurately identify trapped individuals.To address this problem,we propose VIF-YOLO,a visible–infrared fusion model for real-time human detection in dense smoke environments.The framework introduces a lightweight multimodal fusion(LMF)module based on learnable low-rank representation blocks to end-to-end integrate visible and infrared images,preserving fine details while enhancing salient features.In addition,an efficient multiscale attention(EMA)mechanism is incorporated into the YOLOv10n backbone to improve feature representation under low-light conditions.Extensive experiments on our newly constructedmultimodal smoke human detection(MSHD)dataset demonstrate thatVIF-YOLOachievesmAP50 of 99.5%,precision of 99.2%,and recall of 99.3%,outperforming YOLOv10n by a clear margin.Furthermore,when deployed on the NVIDIA Jetson Xavier NX,VIF-YOLO attains 40.6 FPS with an average inference latency of 24.6 ms,validating its real-time capability on edge-computing platforms.These results confirm that VIF-YOLO provides accurate,robust,and fast detection across complex backgrounds and diverse smoke conditions,ensuring reliable and rapid localization of individuals in need of rescue.
文摘Objectives This study aimed to explore and clarify the concept of reflective supervision as a professional self-care strategy to create a positive Intensive Care Unit(ICU)practice environment.Methods Walker and Avant’s eight-step concept analysis approach was utilized to identify and define the attributes,antecedents,and consequences of reflective supervision in the ICU.An extensive literature search was conducted across various databases,including Google Scholar,CINAHL,PubMed.Articles published from 2005 to 2025 were identified.We followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses(PRISMA)2020 statement to indicate the included articles and extract related data based on relevance.Results Forty articles were included in the analysis.The identified attributes included the supervisor-supervisee relationship,effective communication,teamwork,collaborations,reflection,competencies,feedback,continuous support,and autonomous choice.The identified antecedents included participation,supportive supervision,flexibility,open-door policy,training,and motivation.Consequences impacting the success of reflective supervision were identified as promotion of resiliency,autonomy,work-life balance,self-awareness,increased self-esteem,professional development,critical thinking,increased job satisfaction,and enhanced commitment.Conclusions Reflective supervision is a complex professional self-care strategy that enhances ICU practice,by promoting nurses’well-being,self-awareness,therapeutic skills,and professional development.
