We prepared Co_(x)Pt_(100-x)(x=40,45,50,55,60)nanoparticles by the sol-gel method.The phase composition and crystal structure,morphology and microstructure,and magnetic properties of the samples were characterized and...We prepared Co_(x)Pt_(100-x)(x=40,45,50,55,60)nanoparticles by the sol-gel method.The phase composition and crystal structure,morphology and microstructure,and magnetic properties of the samples were characterized and tested using X-ray diffraction(XRD),transmission electron microscopy(TEM),and vibrating sample magnetometer(VSM),respectively.The results demonstrate that the coercivity of CoPt nanoparticles can be effectively controlled by adjusting the atomic ratio of Co and Pt in the samples.Among the compositions studied,the Co_(45)Pt_(55)sample synthesized by the sol-gel method exhibits smaller grain size and a coercivity as high as 6.65×10^(5) A/m is achieved.The morphology and microstructure of the nanoparticles were analyzed by TEM images,indicating that a slight excess of Pt can effectively enhance the coercivity of CoPt nanoparticles.展开更多
The equivalent source(ES)method in the spherical coordinate system has been widely applied to processing,reduction,field modeling,and geophysical and geological interpretation of satellite magnetic anomaly data.Howeve...The equivalent source(ES)method in the spherical coordinate system has been widely applied to processing,reduction,field modeling,and geophysical and geological interpretation of satellite magnetic anomaly data.However,the inversion for the ES model suffers from nonuniqueness and instability,which remain unresolved.To mitigate these issues,we introduce both the minimum and flattest models into the model objective function as an alternative regularization approach in the spherical ES method.We first present the methods,then analyze the accuracy of forward calculation and test the proposed ES method in this study by using synthetic data.The experimental results from simulation data indicate that our proposed regularization effectively suppresses the Backus effect and mitigates inversion instability in the low-latitude region.Finally,we apply the proposed method to magnetic anomaly data from China Seismo-Electromagnetic Satellite-1(CSES-1)and Macao Science Satellite-1(MSS-1)magnetic measurements over Africa by constructing an ES model of the large-scale lithospheric magnetic field.Compared with existing global lithospheric magnetic field models,our ES model demonstrates good consistency at high altitudes and predicts more stable fields at low altitudes.Furthermore,we derive the reduction to the pole(RTP)magnetic anomaly fields and the apparent susceptibility contrast distribution based on the ES model.The latter correlates well with the regional tectonic framework in Africa and surroundings.展开更多
With the increasing accuracy requirements of satellite magnetic detection missions,reducing low-frequency noise has become a key focus of satellite magnetic cleanliness technology.Traditional satellite magnetic simula...With the increasing accuracy requirements of satellite magnetic detection missions,reducing low-frequency noise has become a key focus of satellite magnetic cleanliness technology.Traditional satellite magnetic simulation methods have matured in static magnetic dipole simulations,but there is still significant room for optimization in the simulation and computation of low-frequency magnetic dipole models.This study employs the Gauss-Newton method and Fourier transform techniques for modeling and simulating low-frequency magnetic dipoles.Compared to the traditional particle swarm optimization(PSO)algorithm,this method achieves significant improvements,with errors reaching the order of10^(-13)%under noise-free conditions and maintaining an error level of less than 0.5%under 10%noise.Additionally,the use of Fourier transform and the Gauss-Newton method enables high-precision magnetic field frequency identification and rapid computation of the dipole position and magnetic moment,greatly enhancing the computational efficiency and accuracy of the model.展开更多
A novel parameter identification method for magnetic levitation bearing rotor systems is proposed,based on the modulation function method.The fundamental principle of the modulation function method for parameter ident...A novel parameter identification method for magnetic levitation bearing rotor systems is proposed,based on the modulation function method.The fundamental principle of the modulation function method for parameter identification is derived on the basis of the characteristics of the modulation function.The transformation of the differential equation model of a continuous system into a general algebraic equation model is effectively achieved,thereby avoiding the influence of errors introduced by the initial value and differential derivation of the system.Modulation function method parameter identification models have been established for single-degree-of-freedom and multi-degree-of-freedom magnetic levitation bearing rotor systems.The influence of different parameters of Hartley modulation function on the accuracy of system parameter identification has been investigated,thus providing a basis for the design of Hartley modulation function parameters.Simulation and experimental results demonstrate that the modulation function method can effectively identify system parameters despite the presence of system noise.展开更多
Compared to the conventional permanent magnet synchronous machine(PMSM),the main characteristic of permanent magnet torque machine(PMTM)with high torque is that armature current is high,which has a great influence on ...Compared to the conventional permanent magnet synchronous machine(PMSM),the main characteristic of permanent magnet torque machine(PMTM)with high torque is that armature current is high,which has a great influence on magnetic circuit saturation,so this paper proposes a novel analytical method(AM)considering this problem.The key of this new AM is to consider armature reaction flux and armature leakage flux,which are closely related to output torque.Firstly,the expressions,including magnetomotive force(MMF)generated by permanent magnets(PMs)and armature windings are derived,and meanwhile slotting effect is considered by planning flux path.In addition,the expression of leakage flux density generated by armature windings are calculated,and flux density equivalence coefficient of tooth is calculated to be 2/3,which is used to solve the problem of uneven saturation of each tooth.Then,based on main flux factor and leakage flux factor proposed,an improved iteration process is proposed,and by this new process,the flux density of each yoke and tooth can be obtained,which is beneficial to obtain more accurate air-gap flux density and flux linkage.Finally,a prototype of 60-pole 54-slot is fabricated,and the performances of the electric machine,such as back electromotive force(EMF)and output torque,are calculated by this new AM and finite element method(FEM).The results of FEM and experimental test show that this new AM is good enough to calculate the performance of PMTM.展开更多
The lorentz force-type magnetic bearing(LFTMB)with good linearity is suitable for the high-precision deflection control of the magnetically suspended gyrowheel(MSGW). Two kinds of novel implicit LFTMBs are proposed in...The lorentz force-type magnetic bearing(LFTMB)with good linearity is suitable for the high-precision deflection control of the magnetically suspended gyrowheel(MSGW). Two kinds of novel implicit LFTMBs are proposed in allusion to the poor magnetic flux density uniformity of the existing explicit LFTMB. The improvement of uniformity is realized under the paramagnetic contribution of magnetic ring. Their structures are introduced,the mathematical models are established based on the equivalent magnetic circuit method and the magnetic fields are analyzed by the finite element method based on the design parameters. Simulation results indicate that the magnetic flux density uniformity of implicit LFTMBs is superior to the traditional explicit LFTMB. Furthermore,the implicit trapezoid LFTMB with double magnetic circuits is better than that of those with single magnetic circuit,in terms of the magnetic flux density uniformity and the magnetic flux density. The magnetic flux density of implicit trapezoid double magnetic circuits LFTMB is verified by the experiment. The error between the experimental results and the simulation results is within 5%,which shows that the implicit trapezoid double magnetic circuits LFTMB is promising to meet the high-precision agile maneuver requirement of the magnetically suspended gyrowheel.展开更多
Testing methods of instrumental system in the marine magnetic survey have been studied in this paper, and the feasibility of each method has been testified by the observed data. The conclusion shows that the method br...Testing methods of instrumental system in the marine magnetic survey have been studied in this paper, and the feasibility of each method has been testified by the observed data. The conclusion shows that the method brought out can effectively eliminate the systematic error caused by the instrumental system, and greatly improve the surveying precision and the reliability of the survey results.展开更多
The double-alloy powder mixed method is very proper for developing new small-mass products by changing the composi- tion of sintered Nd-Fe-B magnets, and there is little research on this aspect. The variation on magne...The double-alloy powder mixed method is very proper for developing new small-mass products by changing the composi- tion of sintered Nd-Fe-B magnets, and there is little research on this aspect. The variation on magnetic and mechanical properties of high intrinsic coercivity Nd-Fe-B magnets prepared by double-alloy powder mixed method was discussed, which is a method blend- ing two-type main phase alloy powders with different components. The results showed that the intrinsic coercivity and density of sin- tered Nd-Fe-B magnets increased gradually with the increase in Dy content, and the double-alloy powder mixed method could obtain high intrinsic coercivity Nd-Fe-B magnets with good crystallographic alignment and microstructure. The bending strength of sintered Nd-Fe-B magnets declined, and the Rockwell hardness of sintered Nd-Fe-B magnets first declined, and then increased with the in- crease in Dy content. The microstructure showed that there existed the phenomenon that the Dy element diffused into main phase dur- ing sintering process, and the distribution of Dy content in main phase had some variation in homogeneity as a result of incomplete reaction between the double-alloy powder types.展开更多
Polycrystalline samples La_(0.9-x)EuxSr_(0.1)MnO_3(x = 0.000, 0.075) were prepared by the standard solid-state reaction method. The results show that the samples preform a characteristic of clusters spin-glass state a...Polycrystalline samples La_(0.9-x)EuxSr_(0.1)MnO_3(x = 0.000, 0.075) were prepared by the standard solid-state reaction method. The results show that the samples preform a characteristic of clusters spin-glass state at low temperature. The samples show a characteristic of ferromagnetism(FM) characteristic in the temperature range of 15-125 K and 15-150 K respectively; the samples show preformed clusters in the temperature range of 125-343 K and 150-325 K, respectively, the samples show paramagnetism(PM)characteristic above 343 and 325 K, respectively. The second-order transitions are found at 118 and 135 K for undoped and doped sample, respectively. When the applied magnetic field is 7 T, the maximum magnetic entropy change |△S_M| value of the samples is near the Curie temperature(Tc), and the value of|△S_M| reaches 2.76 and 3.03 J/(K kg), respectively. In addition, the relative cooling power(RCP) is found to be 425.28 and 443.53 J/kg. The numerical fitting data fit well with experimental data. These results indicate that both the samples have the potential to realize magnetic refrigeration in the high temperature region(T > 77 K).展开更多
Aiming at the comprehensive utilization of the rare-earth resources and the preparation of the high-performance low-cost Nd-Fe-B magnets,sintered magnets with different Ce substitution amounts of 17.2 wt%,24.8 wt%and ...Aiming at the comprehensive utilization of the rare-earth resources and the preparation of the high-performance low-cost Nd-Fe-B magnets,sintered magnets with different Ce substitution amounts of 17.2 wt%,24.8 wt%and 31.8 wt%were prepared by intergranularalloy method.The influence of substitution of Ce for Nd on their microstructure and magnetic properties in this work was detailedly investigated.The results indicated that the remanence(Br)and the maximum energy product((BH)max)of the sintered magnets decreased monotonic ally with the increase in Ce substitution.However,the obvious enhancement of coercivity(Hcj)was also observed,which was mainly due to the improvement of microstructure and the smooth,continuous grain boundary(GB).It can be found that a reasonable Ce substitution of 24.8 wt%for the sintered magnets could promote the refinement of microstructure,leading to the realization of superior magnetic properties.It is expected that the investigations could be beneficial to offer a feasible method for preparing the high-performance low-cost Ce-doped magnets.展开更多
Resource-saving（PrNdCe）_2Fe_（14）B sintered magnets with nominal composition（PrNd）_（15-x）Ce_xFe_（77）B_8（x=0–10）were prepared using a dual alloy method by mixing（PrNd）_5Ce_（10）Fe_（77）B_8 with（PrNd）_...Resource-saving（PrNdCe）_2Fe_（14）B sintered magnets with nominal composition（PrNd）_（15-x）Ce_xFe_（77）B_8（x=0–10）were prepared using a dual alloy method by mixing（PrNd）_5Ce_（10）Fe_（77）B_8 with（PrNd）_（15）Fe_（77）B_8 powders. For Ce atomic percent of 1% and 2%, coercivity decreases dramatically. With further increase of Ce atomic percent, the coercivity increases, peaks at 6.38 kOe in（PrNd）_（11）Ce_4Fe_（77）B_8, and then declines gradually. The abnormal dependence of coercivity is likely related to the inhomogeneity of rare earth chemical composition in the intergranular phase, where Pr Nd concentration is strongly dependent on the additive amount of（PrNd）_5Ce_（10）Fe_（77）B_8 powders. In addition, for Ce atomic percent of 8%,7%, and 6% the coercivity is higher than that of magnets prepared by the conventional method, which shows the advantage of the dual alloy method in preparing high abundant rare earth magnets.展开更多
Magnetization configurations were calculated under various magnetic fields for nanocrystalline Pr-Fe-B permanent magnets by micromagnetic finite element method.According to the configurations during demagnetization pr...Magnetization configurations were calculated under various magnetic fields for nanocrystalline Pr-Fe-B permanent magnets by micromagnetic finite element method.According to the configurations during demagnetization process, the mechanism of magnetization reversal was analyzed.For the Pr2Fe14B with 10 nm grains or its composite with 10vol.% α-Fe, the coercivity was determined by nucleation of reversed domain that took place at grain boundaries.However, for Pr2Fe14B with 30 nm grains, coercivity was controlled by pinning of the nucle-ated domain.For Pr2Fe14B/α-Fe with 30vol.% α-Fe, the demagnetization behavior was characterized by continuous reversal of α-Fe moment.展开更多
This paper discusses the forward and inverse problem for cardiac magnetic fields and electric potentials. A torso-heart model established by boundary element method （BEM） is used for studying the distributions of ca...This paper discusses the forward and inverse problem for cardiac magnetic fields and electric potentials. A torso-heart model established by boundary element method （BEM） is used for studying the distributions of cardiac magnetic fields and electric potentials. Because node-to-node and triangle-to-triangle BEM can lead to discrepant field distributions, their properties and influences are compared. Then based on constructed torso-heart model and supposed current source functional model-current dipole array, the magnetic and electric imaging by optimal constrained linear inverse method are applied at the same time. Through figure and reconstructing parameter comparison, though the magnetic current dipole array imaging possesses better reconstructing effect, however node-to-node BEM and triangleto-triangle BEM make little difference to magnetic and electric imaging.展开更多
The main goal of this paper is to investigate natural convective heat transfer and flow characteristics of non-Newtonian nanofluid streaming between two infinite vertical flat plates in the presence of magnetic field ...The main goal of this paper is to investigate natural convective heat transfer and flow characteristics of non-Newtonian nanofluid streaming between two infinite vertical flat plates in the presence of magnetic field and thermal radiation.Initially,a similarity transformation is used to convert momentum and energy conservation equations in partial differential forms into non-linear ordinary differential equations (ODE) applying meaningful boundary conditions.In order to obtain the non-linear ODEs analytically,Galerkin method (GM) is employed.Subsequently,the ODEs are also solved by a reliable numerical solution.In order to test the accuracy,precision and reliability of the analytical method,results of the analytical analysis are compared with the numerical results.With respect to the comparisons,fairly good compatibilities with insignificant errors are observed.Eventually,the impacts of effective parameters including magnetic and radiation parameters and nanofluid volume fraction on the velocity,skin friction coefficient and Nusselt number distributions are comprehensively described.Based on the results,it is revealed that with increasing the role of magnetic force,velocity profile,skin friction coefficient and thermal performance descend.Radiation parameter has insignificant influence on velocity profile while it obviously has augmentative and decreasing effects on skin friction and Nusselt number,respectively.展开更多
With the booming development of electronic information science and 5G communication technology,electromagnetic radi-ation pollution poses a huge threat and damage to humanity.Developing novel and high-performance elec...With the booming development of electronic information science and 5G communication technology,electromagnetic radi-ation pollution poses a huge threat and damage to humanity.Developing novel and high-performance electromagnetic wave(EMW)ab-sorbers is an effective method to solve the above issue and has attracted the attention of many researchers.As a typical magnetic material,ferrite plays an important role in the design of high-performance EMW absorbers,and related research focuses on diversified synthesis methods,strong absorption performance,and refined microstructure development.Herein,we focus on the synthesis of ferrites and their composites and introduce recent advances in the high-temperature solid-phase method,sol-gel method,chemical coprecipitation method,and solvent thermal method in the preparation of high-performance EMW absorbers.This review aims to help researchers understand the advantages and disadvantages of ferrite-based EMW absorbers fabricated through these methods.It also provides important guidance and reference for researchers to design high-performance EMW absorption materials based on ferrite.展开更多
A loose coupling method is used to solve the electromagnetic tube bulging.ANSYS/EMAG is used to model the time varying electromagnetic field with the discharge current used as excitation,in order to obtain the radial ...A loose coupling method is used to solve the electromagnetic tube bulging.ANSYS/EMAG is used to model the time varying electromagnetic field with the discharge current used as excitation,in order to obtain the radial and axial magnetic pressure acting on the tube,the magnetic pressure is then used as boundary conditions to model the high velocity deformation of tube with DYNAFORM,The radial magnetic pressure on the tube decreases from the center to the tube end,axial magnetic pressure is greater near the location equal to the coil height and slight in the other region.The radial displacement of deformed workpicces is distributed uniformly near the tube center and decreases from the center to the end;Deformation from the location equal to coil height to the tube end is little.This distribution is consistent with the distribution of radial pressure;Effect of the axial magnetic pressure on deformation can be ignored,The calculated results show well agreements with the experimental results.展开更多
Experiments on specimens of mild steel and cast iron have beenperformed under vari- ous loading conditions. A modified formula isput forward to analyze the cruciform specimen which is often used inmagnetic methods for...Experiments on specimens of mild steel and cast iron have beenperformed under vari- ous loading conditions. A modified formula isput forward to analyze the cruciform specimen which is often used inmagnetic methods for calibration. We assume that the relationshipbetween the magnetic output and strain is linear and a newfour-coefficient method is deduced. Finally, the results of practi-cal applications are given.展开更多
Mn-Zn ferrites doped with different contents of Sm^（3＋） and Gd^（3＋） ions were prepared by sol-gel auto-combustion method and characterized by Fourier transform infrared spectroscopy（FTIR）, thermogravimetric an...Mn-Zn ferrites doped with different contents of Sm^（3＋） and Gd^（3＋） ions were prepared by sol-gel auto-combustion method and characterized by Fourier transform infrared spectroscopy（FTIR）, thermogravimetric analysis（TG）, X-ray diffraction（XRD）, scanning electron microscopy（SEM） and vibrating sample magnetometer（VSM）. When samples were calcined in a relatively low temperature below 1100 °C, secondary phases（α-Fe_2O_3） could be identified. Therefore, in order to acquire pure and better crystallinity, the suitable calcining temperature of powders was selected at 1200 °C. It was also found that all the samples consisting of ferrite phases of typical spinel cubic structure and average crystallite sizes between 31.5 and 38.2 nm were obtained after calcining at 1200 oC for 4 h. The lattice parameters increased almost linearly with increasing Sm content. A dense microstructure was obtained after sintering at 1250 °C for 4 h. Through the analysis of magnetic properties, hysteresis loops for all the samples were narrow with low values of coercivity and retentivity, indicating the paramagnetic nature of these samples. And saturation magnetization Ms strongly depended on the type of additive to reach a maximum of 47.99 emu/g for x=0.015, which showed a great promise for hyperthermia applications.展开更多
Low-field nuclear magnetic resonance magnet（2 MHz） is required for rock core analysis. However, due to its low field strength, it is hard to achieve a high uniform B0 field only by using the passive shimming. Theref...Low-field nuclear magnetic resonance magnet（2 MHz） is required for rock core analysis. However, due to its low field strength, it is hard to achieve a high uniform B0 field only by using the passive shimming. Therefore, active shimming is necessarily used to further improve uniformity for Halbach magnet. In this work, an equivalent magnetic dipole method is presented for designing shim coils. The minimization of the coil power dissipation is considered as an optimal object to minimize coil heating effect, and the deviation from the target field is selected as a penalty function term. The lsqnonlin optimization toolbox of MATLAB is used to solve the optimization problem. Eight shim coils are obtained in accordance with the contour of the stream function. We simulate each shim coil by ANSYS Maxwell software to verify the validity of the designed coils. Measurement results of the field distribution of these coils are consistent with those of the target fields.The uniformity of the B0 field is improved from 114.2 ppm to 26.9 ppm after using these shim coils.展开更多
Nanocrystalline Ni1-xZnxFe2O4 ferrites with 0≤x≤1 were successfully prepared by a spraying-coprecipitation method.The microstructure was investigated by using XRD and TEM.Magnetic properties were measured with vibra...Nanocrystalline Ni1-xZnxFe2O4 ferrites with 0≤x≤1 were successfully prepared by a spraying-coprecipitation method.The microstructure was investigated by using XRD and TEM.Magnetic properties were measured with vibrating sample magnetometer（VSM） at room temperature.The results show that the grain size of nanocrystalline Ni1-xZnxFe2O4 ferrite calcined at 600 ℃ for 1.5 h is about 30 nm.Lattice parameter and specific saturation magnetization Ms of nanocrystalline Ni1-xZnxFe2O4 ferrite increase with the Zn^2＋ ions content at room temperature,and maximum Ms is 66.8 A·m^2·kg^-1 as the Zn^2＋ ions content is around 0.5,and coercivity Hc of the nanocrystalline Ni1-xZnxFe2O4 ferrite decreases with Zn^2＋ ions content.展开更多
基金Funded by the National Natural Science Foundation of China(No.52371169)。
文摘We prepared Co_(x)Pt_(100-x)(x=40,45,50,55,60)nanoparticles by the sol-gel method.The phase composition and crystal structure,morphology and microstructure,and magnetic properties of the samples were characterized and tested using X-ray diffraction(XRD),transmission electron microscopy(TEM),and vibrating sample magnetometer(VSM),respectively.The results demonstrate that the coercivity of CoPt nanoparticles can be effectively controlled by adjusting the atomic ratio of Co and Pt in the samples.Among the compositions studied,the Co_(45)Pt_(55)sample synthesized by the sol-gel method exhibits smaller grain size and a coercivity as high as 6.65×10^(5) A/m is achieved.The morphology and microstructure of the nanoparticles were analyzed by TEM images,indicating that a slight excess of Pt can effectively enhance the coercivity of CoPt nanoparticles.
基金supported by the National Natural Science Foundation of China(Grant Nos.42250103 and 42174090)the Opening Fund of Key Laboratory of Geological Survey and Evaluation of Ministry of Education(Grant No.GLAB2023ZR02)the MOST Special Fund from the State Key Laboratory of Geological Processes and Mineral Resources(Grant No.MSFGPMR2022-4).
文摘The equivalent source(ES)method in the spherical coordinate system has been widely applied to processing,reduction,field modeling,and geophysical and geological interpretation of satellite magnetic anomaly data.However,the inversion for the ES model suffers from nonuniqueness and instability,which remain unresolved.To mitigate these issues,we introduce both the minimum and flattest models into the model objective function as an alternative regularization approach in the spherical ES method.We first present the methods,then analyze the accuracy of forward calculation and test the proposed ES method in this study by using synthetic data.The experimental results from simulation data indicate that our proposed regularization effectively suppresses the Backus effect and mitigates inversion instability in the low-latitude region.Finally,we apply the proposed method to magnetic anomaly data from China Seismo-Electromagnetic Satellite-1(CSES-1)and Macao Science Satellite-1(MSS-1)magnetic measurements over Africa by constructing an ES model of the large-scale lithospheric magnetic field.Compared with existing global lithospheric magnetic field models,our ES model demonstrates good consistency at high altitudes and predicts more stable fields at low altitudes.Furthermore,we derive the reduction to the pole(RTP)magnetic anomaly fields and the apparent susceptibility contrast distribution based on the ES model.The latter correlates well with the regional tectonic framework in Africa and surroundings.
基金supported by the National Key Research and Development Program of China(Grant No.2023YFC2206003)。
文摘With the increasing accuracy requirements of satellite magnetic detection missions,reducing low-frequency noise has become a key focus of satellite magnetic cleanliness technology.Traditional satellite magnetic simulation methods have matured in static magnetic dipole simulations,but there is still significant room for optimization in the simulation and computation of low-frequency magnetic dipole models.This study employs the Gauss-Newton method and Fourier transform techniques for modeling and simulating low-frequency magnetic dipoles.Compared to the traditional particle swarm optimization(PSO)algorithm,this method achieves significant improvements,with errors reaching the order of10^(-13)%under noise-free conditions and maintaining an error level of less than 0.5%under 10%noise.Additionally,the use of Fourier transform and the Gauss-Newton method enables high-precision magnetic field frequency identification and rapid computation of the dipole position and magnetic moment,greatly enhancing the computational efficiency and accuracy of the model.
基金supported by the National Science and Technology Major Project(Grant No.J2019-Ⅳ-0003-0070).
文摘A novel parameter identification method for magnetic levitation bearing rotor systems is proposed,based on the modulation function method.The fundamental principle of the modulation function method for parameter identification is derived on the basis of the characteristics of the modulation function.The transformation of the differential equation model of a continuous system into a general algebraic equation model is effectively achieved,thereby avoiding the influence of errors introduced by the initial value and differential derivation of the system.Modulation function method parameter identification models have been established for single-degree-of-freedom and multi-degree-of-freedom magnetic levitation bearing rotor systems.The influence of different parameters of Hartley modulation function on the accuracy of system parameter identification has been investigated,thus providing a basis for the design of Hartley modulation function parameters.Simulation and experimental results demonstrate that the modulation function method can effectively identify system parameters despite the presence of system noise.
基金supported in part by the National Natural Science Foundation of China under Grant 52125701.
文摘Compared to the conventional permanent magnet synchronous machine(PMSM),the main characteristic of permanent magnet torque machine(PMTM)with high torque is that armature current is high,which has a great influence on magnetic circuit saturation,so this paper proposes a novel analytical method(AM)considering this problem.The key of this new AM is to consider armature reaction flux and armature leakage flux,which are closely related to output torque.Firstly,the expressions,including magnetomotive force(MMF)generated by permanent magnets(PMs)and armature windings are derived,and meanwhile slotting effect is considered by planning flux path.In addition,the expression of leakage flux density generated by armature windings are calculated,and flux density equivalence coefficient of tooth is calculated to be 2/3,which is used to solve the problem of uneven saturation of each tooth.Then,based on main flux factor and leakage flux factor proposed,an improved iteration process is proposed,and by this new process,the flux density of each yoke and tooth can be obtained,which is beneficial to obtain more accurate air-gap flux density and flux linkage.Finally,a prototype of 60-pole 54-slot is fabricated,and the performances of the electric machine,such as back electromotive force(EMF)and output torque,are calculated by this new AM and finite element method(FEM).The results of FEM and experimental test show that this new AM is good enough to calculate the performance of PMTM.
基金supported by Beijing Municipal Natural Science Foundation (General Program) (No. 3212004)Cultivation Project of Important Scientific Research Achievements of Beijing Institute of Petrochemical Technology(No. BIPTACF-007)
文摘The lorentz force-type magnetic bearing(LFTMB)with good linearity is suitable for the high-precision deflection control of the magnetically suspended gyrowheel(MSGW). Two kinds of novel implicit LFTMBs are proposed in allusion to the poor magnetic flux density uniformity of the existing explicit LFTMB. The improvement of uniformity is realized under the paramagnetic contribution of magnetic ring. Their structures are introduced,the mathematical models are established based on the equivalent magnetic circuit method and the magnetic fields are analyzed by the finite element method based on the design parameters. Simulation results indicate that the magnetic flux density uniformity of implicit LFTMBs is superior to the traditional explicit LFTMB. Furthermore,the implicit trapezoid LFTMB with double magnetic circuits is better than that of those with single magnetic circuit,in terms of the magnetic flux density uniformity and the magnetic flux density. The magnetic flux density of implicit trapezoid double magnetic circuits LFTMB is verified by the experiment. The error between the experimental results and the simulation results is within 5%,which shows that the implicit trapezoid double magnetic circuits LFTMB is promising to meet the high-precision agile maneuver requirement of the magnetically suspended gyrowheel.
文摘Testing methods of instrumental system in the marine magnetic survey have been studied in this paper, and the feasibility of each method has been testified by the observed data. The conclusion shows that the method brought out can effectively eliminate the systematic error caused by the instrumental system, and greatly improve the surveying precision and the reliability of the survey results.
基金Project supported by the Natural Science Foundation of Hubei Province(2014CFB626,2015CFC785)the Research Project of Hubei Provincial Department of Education(D20151801)the Opening Foundation of Hubei Key Laboratory of Automotive Power Train and Electronic Control(ZDK1201404)
文摘The double-alloy powder mixed method is very proper for developing new small-mass products by changing the composi- tion of sintered Nd-Fe-B magnets, and there is little research on this aspect. The variation on magnetic and mechanical properties of high intrinsic coercivity Nd-Fe-B magnets prepared by double-alloy powder mixed method was discussed, which is a method blend- ing two-type main phase alloy powders with different components. The results showed that the intrinsic coercivity and density of sin- tered Nd-Fe-B magnets increased gradually with the increase in Dy content, and the double-alloy powder mixed method could obtain high intrinsic coercivity Nd-Fe-B magnets with good crystallographic alignment and microstructure. The bending strength of sintered Nd-Fe-B magnets declined, and the Rockwell hardness of sintered Nd-Fe-B magnets first declined, and then increased with the in- crease in Dy content. The microstructure showed that there existed the phenomenon that the Dy element diffused into main phase dur- ing sintering process, and the distribution of Dy content in main phase had some variation in homogeneity as a result of incomplete reaction between the double-alloy powder types.
基金Project supported by the State Key Development Program for Basic Research of China(11164019,51562032,61565013)Inner Mongolia Natural Science Foundation(2015MS0109)+1 种基金Research Program of Sciences at Universities of Inner Mongolia Autonomous Region of China(NJZZ11166,NJZY 16237,NJZY12202)Young Science and Technology Foundation of Baotou Teachers'College(BSYKJ2014-22)
文摘Polycrystalline samples La_(0.9-x)EuxSr_(0.1)MnO_3(x = 0.000, 0.075) were prepared by the standard solid-state reaction method. The results show that the samples preform a characteristic of clusters spin-glass state at low temperature. The samples show a characteristic of ferromagnetism(FM) characteristic in the temperature range of 15-125 K and 15-150 K respectively; the samples show preformed clusters in the temperature range of 125-343 K and 150-325 K, respectively, the samples show paramagnetism(PM)characteristic above 343 and 325 K, respectively. The second-order transitions are found at 118 and 135 K for undoped and doped sample, respectively. When the applied magnetic field is 7 T, the maximum magnetic entropy change |△S_M| value of the samples is near the Curie temperature(Tc), and the value of|△S_M| reaches 2.76 and 3.03 J/(K kg), respectively. In addition, the relative cooling power(RCP) is found to be 425.28 and 443.53 J/kg. The numerical fitting data fit well with experimental data. These results indicate that both the samples have the potential to realize magnetic refrigeration in the high temperature region(T > 77 K).
基金financially supported by the Sichuan Province Science and Technology Support Program(No.2014GZ0090)the Key Technology and Development Program of PanXi Experimental Area(No.2016KJT0018).
文摘Aiming at the comprehensive utilization of the rare-earth resources and the preparation of the high-performance low-cost Nd-Fe-B magnets,sintered magnets with different Ce substitution amounts of 17.2 wt%,24.8 wt%and 31.8 wt%were prepared by intergranularalloy method.The influence of substitution of Ce for Nd on their microstructure and magnetic properties in this work was detailedly investigated.The results indicated that the remanence(Br)and the maximum energy product((BH)max)of the sintered magnets decreased monotonic ally with the increase in Ce substitution.However,the obvious enhancement of coercivity(Hcj)was also observed,which was mainly due to the improvement of microstructure and the smooth,continuous grain boundary(GB).It can be found that a reasonable Ce substitution of 24.8 wt%for the sintered magnets could promote the refinement of microstructure,leading to the realization of superior magnetic properties.It is expected that the investigations could be beneficial to offer a feasible method for preparing the high-performance low-cost Ce-doped magnets.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.51461033,51571126,51541105,and 11547032)the Natural Science Foundation of Inner Mongolia,China(Grant No.2013MS0110)the Inner Mongolia University of Science and Technology Innovation Fund,China
文摘Resource-saving（PrNdCe）_2Fe_（14）B sintered magnets with nominal composition（PrNd）_（15-x）Ce_xFe_（77）B_8（x=0–10）were prepared using a dual alloy method by mixing（PrNd）_5Ce_（10）Fe_（77）B_8 with（PrNd）_（15）Fe_（77）B_8 powders. For Ce atomic percent of 1% and 2%, coercivity decreases dramatically. With further increase of Ce atomic percent, the coercivity increases, peaks at 6.38 kOe in（PrNd）_（11）Ce_4Fe_（77）B_8, and then declines gradually. The abnormal dependence of coercivity is likely related to the inhomogeneity of rare earth chemical composition in the intergranular phase, where Pr Nd concentration is strongly dependent on the additive amount of（PrNd）_5Ce_（10）Fe_（77）B_8 powders. In addition, for Ce atomic percent of 8%,7%, and 6% the coercivity is higher than that of magnets prepared by the conventional method, which shows the advantage of the dual alloy method in preparing high abundant rare earth magnets.
基金supported by the National Natural Science Foundation of China (10574156)
文摘Magnetization configurations were calculated under various magnetic fields for nanocrystalline Pr-Fe-B permanent magnets by micromagnetic finite element method.According to the configurations during demagnetization process, the mechanism of magnetization reversal was analyzed.For the Pr2Fe14B with 10 nm grains or its composite with 10vol.% α-Fe, the coercivity was determined by nucleation of reversed domain that took place at grain boundaries.However, for Pr2Fe14B with 30 nm grains, coercivity was controlled by pinning of the nucle-ated domain.For Pr2Fe14B/α-Fe with 30vol.% α-Fe, the demagnetization behavior was characterized by continuous reversal of α-Fe moment.
基金Project supported by the State Key Development Program for Basic Research of China (Grant No. 2006CB601007)the National Natural Science Foundation of China (Grant No. 10674006)the National High Technology Research and Development Program of China (Grant No. 2007AA03Z238)
文摘This paper discusses the forward and inverse problem for cardiac magnetic fields and electric potentials. A torso-heart model established by boundary element method （BEM） is used for studying the distributions of cardiac magnetic fields and electric potentials. Because node-to-node and triangle-to-triangle BEM can lead to discrepant field distributions, their properties and influences are compared. Then based on constructed torso-heart model and supposed current source functional model-current dipole array, the magnetic and electric imaging by optimal constrained linear inverse method are applied at the same time. Through figure and reconstructing parameter comparison, though the magnetic current dipole array imaging possesses better reconstructing effect, however node-to-node BEM and triangleto-triangle BEM make little difference to magnetic and electric imaging.
文摘The main goal of this paper is to investigate natural convective heat transfer and flow characteristics of non-Newtonian nanofluid streaming between two infinite vertical flat plates in the presence of magnetic field and thermal radiation.Initially,a similarity transformation is used to convert momentum and energy conservation equations in partial differential forms into non-linear ordinary differential equations (ODE) applying meaningful boundary conditions.In order to obtain the non-linear ODEs analytically,Galerkin method (GM) is employed.Subsequently,the ODEs are also solved by a reliable numerical solution.In order to test the accuracy,precision and reliability of the analytical method,results of the analytical analysis are compared with the numerical results.With respect to the comparisons,fairly good compatibilities with insignificant errors are observed.Eventually,the impacts of effective parameters including magnetic and radiation parameters and nanofluid volume fraction on the velocity,skin friction coefficient and Nusselt number distributions are comprehensively described.Based on the results,it is revealed that with increasing the role of magnetic force,velocity profile,skin friction coefficient and thermal performance descend.Radiation parameter has insignificant influence on velocity profile while it obviously has augmentative and decreasing effects on skin friction and Nusselt number,respectively.
基金supported by the National Natural Science Foundation of China(No.52377026)Taishan Scholars and Young Experts Program of Shandong Province,China(No.tsqn202103057)the Natural Science Foundation of Shandong Province,China(No.ZR2024ME046).
文摘With the booming development of electronic information science and 5G communication technology,electromagnetic radi-ation pollution poses a huge threat and damage to humanity.Developing novel and high-performance electromagnetic wave(EMW)ab-sorbers is an effective method to solve the above issue and has attracted the attention of many researchers.As a typical magnetic material,ferrite plays an important role in the design of high-performance EMW absorbers,and related research focuses on diversified synthesis methods,strong absorption performance,and refined microstructure development.Herein,we focus on the synthesis of ferrites and their composites and introduce recent advances in the high-temperature solid-phase method,sol-gel method,chemical coprecipitation method,and solvent thermal method in the preparation of high-performance EMW absorbers.This review aims to help researchers understand the advantages and disadvantages of ferrite-based EMW absorbers fabricated through these methods.It also provides important guidance and reference for researchers to design high-performance EMW absorption materials based on ferrite.
文摘A loose coupling method is used to solve the electromagnetic tube bulging.ANSYS/EMAG is used to model the time varying electromagnetic field with the discharge current used as excitation,in order to obtain the radial and axial magnetic pressure acting on the tube,the magnetic pressure is then used as boundary conditions to model the high velocity deformation of tube with DYNAFORM,The radial magnetic pressure on the tube decreases from the center to the tube end,axial magnetic pressure is greater near the location equal to the coil height and slight in the other region.The radial displacement of deformed workpicces is distributed uniformly near the tube center and decreases from the center to the end;Deformation from the location equal to coil height to the tube end is little.This distribution is consistent with the distribution of radial pressure;Effect of the axial magnetic pressure on deformation can be ignored,The calculated results show well agreements with the experimental results.
文摘Experiments on specimens of mild steel and cast iron have beenperformed under vari- ous loading conditions. A modified formula isput forward to analyze the cruciform specimen which is often used inmagnetic methods for calibration. We assume that the relationshipbetween the magnetic output and strain is linear and a newfour-coefficient method is deduced. Finally, the results of practi-cal applications are given.
基金Project supported by the National Natural Science Foundation of China(51102073)the Natural Science Foundation of Education Department of Anhui Province of China(KJ2015A232,KJ2015B1105906)+3 种基金the Natural Science Foundation of Anhui Province of China(1308085QB35)the research fund of State Key Laboratory of Structural Chemistry(20110012)Anhui Province Outstanding Young Teachers Visit Abroad Training Projects(gxfxZD2016220)the Outstanding Young Talent Project in Colleges and Universities of Anhui Province
文摘Mn-Zn ferrites doped with different contents of Sm^（3＋） and Gd^（3＋） ions were prepared by sol-gel auto-combustion method and characterized by Fourier transform infrared spectroscopy（FTIR）, thermogravimetric analysis（TG）, X-ray diffraction（XRD）, scanning electron microscopy（SEM） and vibrating sample magnetometer（VSM）. When samples were calcined in a relatively low temperature below 1100 °C, secondary phases（α-Fe_2O_3） could be identified. Therefore, in order to acquire pure and better crystallinity, the suitable calcining temperature of powders was selected at 1200 °C. It was also found that all the samples consisting of ferrite phases of typical spinel cubic structure and average crystallite sizes between 31.5 and 38.2 nm were obtained after calcining at 1200 oC for 4 h. The lattice parameters increased almost linearly with increasing Sm content. A dense microstructure was obtained after sintering at 1250 °C for 4 h. Through the analysis of magnetic properties, hysteresis loops for all the samples were narrow with low values of coercivity and retentivity, indicating the paramagnetic nature of these samples. And saturation magnetization Ms strongly depended on the type of additive to reach a maximum of 47.99 emu/g for x=0.015, which showed a great promise for hyperthermia applications.
基金Project supported by the State Key Development Program for Basic Research of China(Grant No.2014CB541602)the National Natural Science Foundation of China(Grant Nos.51677008 and 51707028)the Fundamental Research Funds of Central Universities,China(Grant No.106112015CDJXY150003)
文摘Low-field nuclear magnetic resonance magnet（2 MHz） is required for rock core analysis. However, due to its low field strength, it is hard to achieve a high uniform B0 field only by using the passive shimming. Therefore, active shimming is necessarily used to further improve uniformity for Halbach magnet. In this work, an equivalent magnetic dipole method is presented for designing shim coils. The minimization of the coil power dissipation is considered as an optimal object to minimize coil heating effect, and the deviation from the target field is selected as a penalty function term. The lsqnonlin optimization toolbox of MATLAB is used to solve the optimization problem. Eight shim coils are obtained in accordance with the contour of the stream function. We simulate each shim coil by ANSYS Maxwell software to verify the validity of the designed coils. Measurement results of the field distribution of these coils are consistent with those of the target fields.The uniformity of the B0 field is improved from 114.2 ppm to 26.9 ppm after using these shim coils.
基金Funded by the Natural Science Foundation of High Education School ofAnhui Province,China (Nos:KJ2007B0271 and KJ2010A095)
文摘Nanocrystalline Ni1-xZnxFe2O4 ferrites with 0≤x≤1 were successfully prepared by a spraying-coprecipitation method.The microstructure was investigated by using XRD and TEM.Magnetic properties were measured with vibrating sample magnetometer（VSM） at room temperature.The results show that the grain size of nanocrystalline Ni1-xZnxFe2O4 ferrite calcined at 600 ℃ for 1.5 h is about 30 nm.Lattice parameter and specific saturation magnetization Ms of nanocrystalline Ni1-xZnxFe2O4 ferrite increase with the Zn^2＋ ions content at room temperature,and maximum Ms is 66.8 A·m^2·kg^-1 as the Zn^2＋ ions content is around 0.5,and coercivity Hc of the nanocrystalline Ni1-xZnxFe2O4 ferrite decreases with Zn^2＋ ions content.
