Gauss radial basis functions(GRBF)are frequently employed in data fitting and machine learning.Their linear independence property can theoretically guarantee the avoidance of data redundancy.In this paper,one of the m...Gauss radial basis functions(GRBF)are frequently employed in data fitting and machine learning.Their linear independence property can theoretically guarantee the avoidance of data redundancy.In this paper,one of the main contributions is proving this property using linear algebra instead of profound knowledge.This makes it easy to read and understand this fundamental fact.The proof of linear independence of a set of Gauss functions relies on the constructing method for one-dimensional space and on the deducing method for higher dimensions.Additionally,under the condition of preserving the same moments between the original function and interpolating function,both the interpolating existence and uniqueness are proven for GRBF in one-dimensional space.The final work demonstrates the application of the GRBF method to locate lunar olivine.By combining preprocessed data using GRBF with the removing envelope curve method,a program is created to find the position of lunar olivine based on spectrum data,and the numerical experiment shows that it is an effective scheme.展开更多
Smart card-automated fare collection systems now routinely record large volumes of data comprising the origins and destinations of travelers.Processing and analyzing these data open new opportunities in urban modeling...Smart card-automated fare collection systems now routinely record large volumes of data comprising the origins and destinations of travelers.Processing and analyzing these data open new opportunities in urban modeling and travel behavior research.This study seeks to develop an accurate framework for the study of urban mobility from smart card data by developing a heuristic primary location model to identify the home and work locations.The model uses journey counts as an indicator of usage regularity,visit-frequency to identify activity locations for regular commuters,and stay-time for the classification of work and home locations and activities.London is taken as a case study,and the model results were validated against survey data from the London Travel Demand Survey and volunteer survey.Results demonstrate that the proposed model is able to detect meaningful home and work places with high precision.This study offers a new and cost-effective approach to travel behavior and demand research.展开更多
Surface-enhanced Raman spectroscopy(SERS)has evolved from a laboratory technique to a practical tool for ultra-sensitive detection,particularly in the biomedical field,where precise molecular identification is crucial...Surface-enhanced Raman spectroscopy(SERS)has evolved from a laboratory technique to a practical tool for ultra-sensitive detection,particularly in the biomedical field,where precise molecular identification is crucial.Despite significant advancements,a gap remains in the literature,as no comprehensive review systematically addresses the high-precision construction of SERS substrates for ultrasensitive biomedical detection.This review fills that gap by exploring recent progress in fabricating high-precision SERS substrates,emphasizing their role in enabling ultrasensitive bio-medical sensors.We carefully examine the key to these advancements is the precision engineering of substrates,including noble metals,semiconductors,carbon-based materials,and two-dimensional materials,which is essential for achieving the high sensitivity required for ultrasensitive detection.Applications in biomedical diagnostics and molecular analysis are highlighted.Finally,we address the challenges in SERS substrate preparation and outline future directions,focusing on improvement strategies,design concepts,and expanding applications for these advanced materials.展开更多
Large-aperture optical components are of paramount importance in domains such as integrated circuits,photolithography,aerospace,and inertial confinement fusion.However,measuring their surface profiles relies predomina...Large-aperture optical components are of paramount importance in domains such as integrated circuits,photolithography,aerospace,and inertial confinement fusion.However,measuring their surface profiles relies predominantly on the phase-shifting approach,which involves collecting multiple interferograms and imposes stringent demands on environmental stability.These issues significantly hinder its ability to achieve real-time and dynamic high-precision measurements.Therefore,this study proposes a high-precision large-aperture single-frame interferometric surface profile measurement(LA-SFISPM)method based on deep learning and explores its capability to realize dynamic measurements with high accuracy.The interferogram is matched to the phase by training the data measured using the small aperture.The consistency of the surface features of the small and large apertures is enhanced via contrast learning and feature-distribution alignment.Hence,high-precision phase reconstruction of large-aperture optical components can be achieved without using a phase shifter.The experimental results show that for the tested mirror withΦ=820 mm,the surface profile obtained from LA-SFISPM is subtracted point-by-point from the ground truth,resulting in a maximum single-point error of 4.56 nm.Meanwhile,the peak-to-valley(PV)value is 0.0758λ,and the simple repeatability of root mean square(SR-RMS)value is 0.00025λ,which aligns well with the measured results obtained by ZYGO.In particular,a significant reduction in the measurement time(reduced by a factor of 48)is achieved compared with that of the traditional phase-shifting method.Our proposed method provides an efficient,rapid,and accurate method for obtaining the surface profiles of optical components with different diameters without employing a phase-shifting approach,which is highly desired in large-aperture interferometric measurement systems.展开更多
The elliptic integral method(EIM) is an efficient analytical approach for analyzing large deformations of elastic beams. However, it faces the following challenges.First, the existing EIM can only handle cases with kn...The elliptic integral method(EIM) is an efficient analytical approach for analyzing large deformations of elastic beams. However, it faces the following challenges.First, the existing EIM can only handle cases with known deformation modes. Second,the existing EIM is only applicable to Euler beams, and there is no EIM available for higher-precision Timoshenko and Reissner beams in cases where both force and moment are applied at the end. This paper proposes a general EIM for Reissner beams under arbitrary boundary conditions. On this basis, an analytical equation for determining the sign of the elliptic integral is provided. Based on the equation, we discover a class of elliptic integral piecewise points that are distinct from inflection points. More importantly, we propose an algorithm that automatically calculates the number of inflection points and other piecewise points during the nonlinear solution process, which is crucial for beams with unknown or changing deformation modes.展开更多
With the intensifying competition in the integrated circuit(IC)industry,the high turnover rate of integrated circuit engineers has become a prominent issue affecting the technological continuity of high-precision,spec...With the intensifying competition in the integrated circuit(IC)industry,the high turnover rate of integrated circuit engineers has become a prominent issue affecting the technological continuity of high-precision,specialized,and innovative enterprises.As a representative of such enterprises,JL Technology has faced challenges to its R&D efficiency due to talent loss in recent years.This study takes this enterprise as a case to explore feasible paths to reduce turnover rates through optimizing training and career development systems.The research designs a method combining learning maps and talent maps,utilizes a competency model to clarify the direction for engineers’skill improvement,implements talent classification management using a nine-grid model,and achieves personalized training through Individual Development Plans(IDPs).Analysis of the enterprise’s historical data reveals that the main reasons for turnover are unclear career development paths and insufficient resources for skill improvement.After pilot implementation,the turnover rate in core departments decreased by 12%,and employee satisfaction with training increased by 24%.The results indicate that matching systematic talent reviews with dynamic learning resources can effectively enhance engineers’sense of belonging.This study provides a set of highly operational management tools for small and medium-sized high-precision,specialized,and innovative technology enterprises,verifies their applicability in such enterprises,and offers replicable experiences for similar enterprises to optimize their talent strategies[1].展开更多
To realize high-precision automatic measurement of two-dimensional geometric features on parts, a cooperative measurement system based on machine vision is constructed. Its hardware structure, functional composition a...To realize high-precision automatic measurement of two-dimensional geometric features on parts, a cooperative measurement system based on machine vision is constructed. Its hardware structure, functional composition and working principle are introduced. The mapping relationship between the feature image coordinates and the measuring space coordinates is established. The method of measuring path planning of small field of view （FOV） images is proposed. With the cooperation of the panoramic image of the object to be measured, the small FOV images with high object plane resolution are acquired automatically. Then, the auxiliary measuring characteristics are constructed and the parameters of the features to be measured are automatically extracted. Experimental results show that the absolute value of relative error is less than 0. 03% when applying the cooperative measurement system to gauge the hole distance of 100 mm nominal size. When the object plane resolving power of the small FOV images is 16 times that of the large FOV image, the measurement accuracy of small FOV images is improved by 14 times compared with the large FOV image. It is suitable for high-precision automatic measurement of two-dimensional complex geometric features distributed on large scale parts.展开更多
As an important parameter in the single airborne passive locating system, the rate of phase difference change contains range information of the radio emitter. Taking single carrier sine pulse signals as an example, th...As an important parameter in the single airborne passive locating system, the rate of phase difference change contains range information of the radio emitter. Taking single carrier sine pulse signals as an example, this article illustrates the principle of passive location through measurement of rates of phase difference change and analyzes the structure of measurement errors. On the basis of the Cramér-Rao lower bound (CRLB), an algorithm associated with time-chips is proposed to determine the rates of pha...展开更多
The intersection method is one of the basic approaches for locating earthquakes and is not only robust but also efficient. However, its location accuracy is not high, especially for focal depth because the velocity mo...The intersection method is one of the basic approaches for locating earthquakes and is not only robust but also efficient. However, its location accuracy is not high, especially for focal depth because the velocity model used for the conventional intersection method is based on homogeneous or laterally homogeneous media, which is too simple. In order to improve the accuracy, we have modified the existing intersection method. In the modified approach, the earthquake loci are not assumed to be circular or hyperbolic and calculation accuracy is improved using a minimum traveltime tree algorithm for tracing rays. The numerical model shows that the modified method can locate earthquakes in complex velocity models.展开更多
A conventional non-computerized numerical control （CNC） machine is updated by mounting a six degree-of-free （DOF） parallel mechanism on it, thus obtaining a new CNC one. The structure of this CNC milling machine i...A conventional non-computerized numerical control （CNC） machine is updated by mounting a six degree-of-free （DOF） parallel mechanism on it, thus obtaining a new CNC one. The structure of this CNC milling machine is introduced, and the workpiece locating system and the post processing system of the cutter location （CL） data file are analyzed. The new machine has advantages of low costs, simple structure, good rigidity, and high precision. It is easy to be transformed and used to process the workpiece with a complex surface.展开更多
Multi-sensor coordinate unification in dimensional metrology is used in order to get holistic, more accurate and reliable information about a workpiece based on several or multiple measurement values from ...Multi-sensor coordinate unification in dimensional metrology is used in order to get holistic, more accurate and reliable information about a workpiece based on several or multiple measurement values from one or more sensors. Because of the problem that standard ball is deficient as a standard artifact in the coordinate unification of high-precision composite measurement in two dimensions （2D） , a new method is proposed in this paper which uses angle gauge blocks as standard artifacts to achieve coordinate unification between the image sensor and the tactile probe. By comparing the standard ball with the angle gauge block as a standard artifact, theoretical analysis and experimental results are given to prove that it is more precise and more convenient to use angle gauge blocks as standard artifacts to achieve coordinate unification of high-precision composite measurement in two dimensions.展开更多
A velocity model is an important factor influencing microseismic event locations. We re- view the velocity modeling and inversion techniques for locating microseismic events in exploration for unconventional oil and g...A velocity model is an important factor influencing microseismic event locations. We re- view the velocity modeling and inversion techniques for locating microseismic events in exploration for unconventional oil and gas reservoirs. We first describe the geological and geophysical characteristics of reservoir formations related to hydraulic fracturing in heterogeneity, anisotropy, and variability, then discuss the influences of velocity estimation, anisotropy model, and their time-lapse changes on the accuracy in determining microseismic event locations, and then survey some typical methods for building velocity models in locating event locations. We conclude that the three tangled physical attributes of reservoirs make microseismic monitoring very challenging. The uncertainties in velocity model and ignoring its anisotropies and its variations in hydraulic fracturing can cause systematic mislocations of microseismie events which are unacceptable in microseismic monitoring. So, we propose some potential ways for building accurate velocity models.展开更多
Since GPS signals are unavailable for indoor navigation, current research mainly focuses on vision-based locating with a single mark. An obvious disadvantage with this approach is that locating will fail when the mark...Since GPS signals are unavailable for indoor navigation, current research mainly focuses on vision-based locating with a single mark. An obvious disadvantage with this approach is that locating will fail when the mark cannot be seen. The use of multiple marks can solve this problem. However, the extra process to design and identify different marks will significantly increase system complexity. In this paper, a novel vision-based locating method is proposed by using marks with feature points arranged in a radial shape. The feature points of the marks consist of inner points and outer points. The positions of the inner points are the same in all marks, while the positions of the outer points are different in different marks. Unlike traditional camera locating methods （the PnP methods）, the proposed method can calculate the camera location and the positions of the outer points simultaneously. Then the calculation results of the positions of the outer points are used to identify the mark. This method can make navigation with multiple marks more efficient. Simulations and real world experiments are carried out, and their results show that the proposed method is fast, accurate and robust to noise.展开更多
Drogue recognition and 3D locating is a key problem during the docking phase of the autonomous aerial refueling （AAR）. To solve this problem, a novel and effective method based on monocular vision is presented in th...Drogue recognition and 3D locating is a key problem during the docking phase of the autonomous aerial refueling （AAR）. To solve this problem, a novel and effective method based on monocular vision is presented in this paper. Firstly, by employing computer vision with red-ring-shape feature, a drogue detection and recognition algorithm is proposed to guarantee safety and ensure the robustness to the drogue diversity and the changes in environmental condi- tions, without using a set of infrared light emitting diodes （LEDs） on the parachute part of the dro- gue. Secondly, considering camera lens distortion, a monocular vision measurement algorithm for drogue 3D locating is designed to ensure the accuracy and real-time performance of the system, with the drogue attitude provided. Finally, experiments are conducted to demonstrate the effective- ness of the proposed method. Experimental results show the performances of the entire system in contrast with other methods, which validates that the proposed method can recognize and locate the drogue three dimensionally, rapidly and precisely.展开更多
Technology of passive location has broad prospects in applications. In this paper, the method using the phase rate of change for the single observer passive location is introduced based on existing methods. One can ob...Technology of passive location has broad prospects in applications. In this paper, the method using the phase rate of change for the single observer passive location is introduced based on existing methods. One can obtain the direction of the target with phase information of two orthogonal interferometers on the observer and the radial distance with the corresponding phase rate of change. Then the target can be located with high speed and precision. A locating approach is given when the flying posture of t...展开更多
In addition to the canonical nucleobases, a variety of chemical modifications have been identified presence in nucleic acids. These modifications have been demonstrated to involve in regulating the spatiotemporal expr...In addition to the canonical nucleobases, a variety of chemical modifications have been identified presence in nucleic acids. These modifications have been demonstrated to involve in regulating the spatiotemporal expression of genes. Up to date, over 150 types of chemical modifications have been found existence in nucleic acids. Understanding the functional roles of modifications relies on deciphering the location information of modifications in nucleic acids. Analytical methods for studying nucleic acid modifications have greatly advanced in the last decade. To locate the modifications in nucleic acids, various mass spectrometry (MS)-based analytical strategies have been established. Recent progress in next-generation sequencing (NGS) in conjugation with immunoprecipitation, chemical reaction, enzyme-mediated mutation, or nanomaterials offer genome-wide or transcriptome-wide mapping of modifications, which greatly revolutionize the field of epigenetic modifications. Herein, we reviewed and summarized the established methods and the breakthrough of the techniques for locating modifications in nucleic acids. In addition, we discussed the principles, applications, advantages and drawbacks of these methods. We believe that with the rapid advancement of techniques and methods,the functions of nucleic acid modifications will be fully understood in the future.展开更多
in order to achieve a more efficient way to accurately detect the position of the fire source of spontaneous combustion underground mine, a simple fire source locating method, based on infrared scanning system which c...in order to achieve a more efficient way to accurately detect the position of the fire source of spontaneous combustion underground mine, a simple fire source locating method, based on infrared scanning system which can determine the point where the highest temperature on the surface of igniting ores occurs, was proposed. First, the differential equations that describe heat flow in ore body were presented and the relationship between the surface temperature distribution and the depth and intensity of inner fire source was established with a relatively simple heat transfer model. With the solution of equation, the expression of the relationship between the surface temperature distribution and the inner fire source was deduced and the mathematical-physical model of heat transfer process was set up. Then, with the model, visualization of fire source on the basis of MATLAB simulation platform was realized. The results show that： 1） within 10 m, when the detecting depth is less than 2 m, the temperature perturbation on ores surface can change rapidly, and then slowly; after 4 m, in contrast, it changes very little, and is even close to zero at 10 m; 2） When it is close to self-ignition duration and the detective depths are 2, 5 and 10 m, respectively, the maximum temperature differences are correspondingly 0.5, 0.04 and 0.005 ℃ in the scope of 1 m×1 m; under the same condition, the maximum temperature differences are 1.391, 0.136 and 0.018 ℃, respectively, in the scope of 2 m×2 m. Therefore, this system can be used to measure the temperature differences on the surface of ore body and determine the highest temperature point directly. Also, it is possible to determine the depth of fire source and its intensity by locating method of fire source indirectly.展开更多
Fixture locating layout has a direct and influential impact on aeronautical thin-walled component(ATWC)manufacturing quality.The purpose is to develop a topological optimization method for ATWC fixture locating layout...Fixture locating layout has a direct and influential impact on aeronautical thin-walled component(ATWC)manufacturing quality.The purpose is to develop a topological optimization method for ATWC fixture locating layout to minimize the manufacturing deformation.Firstly,a topological optimization model that takes the stiffness of ATWC as the objective function and the volume of the locating structure as the constraint is established.Secondly,ATWC and the locating structure are regarded as an integrated entity,and the variable-density method based topological optimization approach is adopted for the optimization of the locating structure using ABAQUS topology optimization module(ATOM).Thirdly,through a subsequent model reconstruction referring to the obtained topological structure,the optimal fixture locating layout is achieved.Finally,a case study is conducted to verify the proposed method and the comparison results with firefly algorithm(FA)coupled with finite element analysis(FEA)indicate that the number and positions of the locators for ATWC can be optimized simultaneously and successfully by the proposed topological optimization model.展开更多
The Tibetan Plateau(TP)is the youngest orogenic belt resulting from a continental collision on the Earth.It is a natural laboratory for studying continental dynamics,such as continental convergence,plate subduction,an...The Tibetan Plateau(TP)is the youngest orogenic belt resulting from a continental collision on the Earth.It is a natural laboratory for studying continental dynamics,such as continental convergence,plate subduction,and plateau uplift.Investigating the deep structure of the TP has always been a popular issue in geological research.The Moho is the boundary between the crust and the mantle and therefore plays a crucial role in the Earth’s structure.Parameters such as depth and lateral variation,as well as the fine structure of the crust-mantle interface,reveal the lithospheric dynamics in the TP.Two methods are generally employed to study the Moho surface:seismic detection and gravity inversion.Seismic detection has the characteristic of high precision,but it is limited to a few cross-sectional lines and is quite costly.It is not suitable for and cannot be carried out over a large area of the TP.The Moho depth over a large area can be obtained through gravity inversion,but this method is affected by the nature of gravity data,and the accuracy of the inversion method is lower than that of seismic detection.In this work,a high-precision gravity field model was selected.The Parker-Oldenburg interface inversion method was used,within the constraints of seismic observations,and the Bott iteration method was introduced to enhance the inversion efficiency.The Moho depth in the TP was obtained with high precision,consistent with the seismic detection results.The research results showed that the shape of the Moho in the TP is complex and the variation range is large,reaching 60−80 km.In contrast with the adjacent area,a clear zone of sharp variation appears at the edge of the plateau.In the interior of the TP,the buried depth of the Moho is characterized by two depressions and two uplifts.To the south of the Yarlung Zangbo River,the Moho inclines to the north,and to the north,the Moho depresses downward,which was interpreted as the Indian plate subducting to the north below Xizang.The Moho depression on the north side of the Qiangtang block,reaching 72 km deep,may be a result of the southward subduction of the lithosphere.The Moho uplift of the Qiangtang block has the same strike as the Bangong−Nujiang suture zone,which may indicate that the area is compensated by a low-density and low-velocity mantle.展开更多
基金Supported by the National Basic Research Program of China(2012CB025904)Zhengzhou Shengda University of Economics,Business and Management(SD-YB2025085)。
文摘Gauss radial basis functions(GRBF)are frequently employed in data fitting and machine learning.Their linear independence property can theoretically guarantee the avoidance of data redundancy.In this paper,one of the main contributions is proving this property using linear algebra instead of profound knowledge.This makes it easy to read and understand this fundamental fact.The proof of linear independence of a set of Gauss functions relies on the constructing method for one-dimensional space and on the deducing method for higher dimensions.Additionally,under the condition of preserving the same moments between the original function and interpolating function,both the interpolating existence and uniqueness are proven for GRBF in one-dimensional space.The final work demonstrates the application of the GRBF method to locate lunar olivine.By combining preprocessed data using GRBF with the removing envelope curve method,a program is created to find the position of lunar olivine based on spectrum data,and the numerical experiment shows that it is an effective scheme.
基金This work was funded by the Economic and Social Research Council(ESRC)in the United Kingdom[grant number 1477365].
文摘Smart card-automated fare collection systems now routinely record large volumes of data comprising the origins and destinations of travelers.Processing and analyzing these data open new opportunities in urban modeling and travel behavior research.This study seeks to develop an accurate framework for the study of urban mobility from smart card data by developing a heuristic primary location model to identify the home and work locations.The model uses journey counts as an indicator of usage regularity,visit-frequency to identify activity locations for regular commuters,and stay-time for the classification of work and home locations and activities.London is taken as a case study,and the model results were validated against survey data from the London Travel Demand Survey and volunteer survey.Results demonstrate that the proposed model is able to detect meaningful home and work places with high precision.This study offers a new and cost-effective approach to travel behavior and demand research.
基金supported by the projects funded by the Education Department of Shaanxi Provincial Government(NO.23JP116)the Natural Science Fund of Shaanxi Province(NO.2024JC-YBMS-396)+3 种基金the National Natural Science Foundation of China(NO.52171191,52371198,U22A20137)the Constructing National Independent Innovation Demonstration Zones(XM2024XTGXQ05)Shenzhen Science and Technology Innovation Program(JCYJ20220818102215033,GJHZ20210705142542015,JCYJ20220530160811027)Guangdong HUST Industrial Technology Research Institute,Guangdong Provincial Key Laboratory of Manufacturing Equipment Digitization(2023B1212060012).
文摘Surface-enhanced Raman spectroscopy(SERS)has evolved from a laboratory technique to a practical tool for ultra-sensitive detection,particularly in the biomedical field,where precise molecular identification is crucial.Despite significant advancements,a gap remains in the literature,as no comprehensive review systematically addresses the high-precision construction of SERS substrates for ultrasensitive biomedical detection.This review fills that gap by exploring recent progress in fabricating high-precision SERS substrates,emphasizing their role in enabling ultrasensitive bio-medical sensors.We carefully examine the key to these advancements is the precision engineering of substrates,including noble metals,semiconductors,carbon-based materials,and two-dimensional materials,which is essential for achieving the high sensitivity required for ultrasensitive detection.Applications in biomedical diagnostics and molecular analysis are highlighted.Finally,we address the challenges in SERS substrate preparation and outline future directions,focusing on improvement strategies,design concepts,and expanding applications for these advanced materials.
基金funded by the National Natural Science Foundation of China Instrumentation Program(52327806)Youth Fund of the National Nature Foundation of China(62405020)China Postdoctoral Science Foundation(2024M764131).
文摘Large-aperture optical components are of paramount importance in domains such as integrated circuits,photolithography,aerospace,and inertial confinement fusion.However,measuring their surface profiles relies predominantly on the phase-shifting approach,which involves collecting multiple interferograms and imposes stringent demands on environmental stability.These issues significantly hinder its ability to achieve real-time and dynamic high-precision measurements.Therefore,this study proposes a high-precision large-aperture single-frame interferometric surface profile measurement(LA-SFISPM)method based on deep learning and explores its capability to realize dynamic measurements with high accuracy.The interferogram is matched to the phase by training the data measured using the small aperture.The consistency of the surface features of the small and large apertures is enhanced via contrast learning and feature-distribution alignment.Hence,high-precision phase reconstruction of large-aperture optical components can be achieved without using a phase shifter.The experimental results show that for the tested mirror withΦ=820 mm,the surface profile obtained from LA-SFISPM is subtracted point-by-point from the ground truth,resulting in a maximum single-point error of 4.56 nm.Meanwhile,the peak-to-valley(PV)value is 0.0758λ,and the simple repeatability of root mean square(SR-RMS)value is 0.00025λ,which aligns well with the measured results obtained by ZYGO.In particular,a significant reduction in the measurement time(reduced by a factor of 48)is achieved compared with that of the traditional phase-shifting method.Our proposed method provides an efficient,rapid,and accurate method for obtaining the surface profiles of optical components with different diameters without employing a phase-shifting approach,which is highly desired in large-aperture interferometric measurement systems.
基金supported by the National Natural Science Foundation of China (Nos. 12172388 and 12472400)the Guangdong Basic and Applied Basic Research Foundation of China(No. 2025A1515011975)the Scientific Research Project of Guangdong Polytechnic Normal University of China (No. 2023SDKYA010)
文摘The elliptic integral method(EIM) is an efficient analytical approach for analyzing large deformations of elastic beams. However, it faces the following challenges.First, the existing EIM can only handle cases with known deformation modes. Second,the existing EIM is only applicable to Euler beams, and there is no EIM available for higher-precision Timoshenko and Reissner beams in cases where both force and moment are applied at the end. This paper proposes a general EIM for Reissner beams under arbitrary boundary conditions. On this basis, an analytical equation for determining the sign of the elliptic integral is provided. Based on the equation, we discover a class of elliptic integral piecewise points that are distinct from inflection points. More importantly, we propose an algorithm that automatically calculates the number of inflection points and other piecewise points during the nonlinear solution process, which is crucial for beams with unknown or changing deformation modes.
文摘With the intensifying competition in the integrated circuit(IC)industry,the high turnover rate of integrated circuit engineers has become a prominent issue affecting the technological continuity of high-precision,specialized,and innovative enterprises.As a representative of such enterprises,JL Technology has faced challenges to its R&D efficiency due to talent loss in recent years.This study takes this enterprise as a case to explore feasible paths to reduce turnover rates through optimizing training and career development systems.The research designs a method combining learning maps and talent maps,utilizes a competency model to clarify the direction for engineers’skill improvement,implements talent classification management using a nine-grid model,and achieves personalized training through Individual Development Plans(IDPs).Analysis of the enterprise’s historical data reveals that the main reasons for turnover are unclear career development paths and insufficient resources for skill improvement.After pilot implementation,the turnover rate in core departments decreased by 12%,and employee satisfaction with training increased by 24%.The results indicate that matching systematic talent reviews with dynamic learning resources can effectively enhance engineers’sense of belonging.This study provides a set of highly operational management tools for small and medium-sized high-precision,specialized,and innovative technology enterprises,verifies their applicability in such enterprises,and offers replicable experiences for similar enterprises to optimize their talent strategies[1].
基金The National Natural Science Foundation of China(No.51175267)the Natural Science Foundation of Jiangsu Province(No.BK2010481)+2 种基金the Ph.D.Programs Foundation of Ministry of Education of China(No.20113219120004)China Postdoctoral Science Foundation(No.20100481148)the Postdoctoral Science Foundation of Jiangsu Province(No.1001004B)
文摘To realize high-precision automatic measurement of two-dimensional geometric features on parts, a cooperative measurement system based on machine vision is constructed. Its hardware structure, functional composition and working principle are introduced. The mapping relationship between the feature image coordinates and the measuring space coordinates is established. The method of measuring path planning of small field of view （FOV） images is proposed. With the cooperation of the panoramic image of the object to be measured, the small FOV images with high object plane resolution are acquired automatically. Then, the auxiliary measuring characteristics are constructed and the parameters of the features to be measured are automatically extracted. Experimental results show that the absolute value of relative error is less than 0. 03% when applying the cooperative measurement system to gauge the hole distance of 100 mm nominal size. When the object plane resolving power of the small FOV images is 16 times that of the large FOV image, the measurement accuracy of small FOV images is improved by 14 times compared with the large FOV image. It is suitable for high-precision automatic measurement of two-dimensional complex geometric features distributed on large scale parts.
基金Aeronautical Science Foundation of China (2007ZC53030)
文摘As an important parameter in the single airborne passive locating system, the rate of phase difference change contains range information of the radio emitter. Taking single carrier sine pulse signals as an example, this article illustrates the principle of passive location through measurement of rates of phase difference change and analyzes the structure of measurement errors. On the basis of the Cramér-Rao lower bound (CRLB), an algorithm associated with time-chips is proposed to determine the rates of pha...
基金This work is supported by the National Natural Science Foundation of China(40674044)the Special Foundation for Basic Professional Scientific Research (DQJB06A02)
文摘The intersection method is one of the basic approaches for locating earthquakes and is not only robust but also efficient. However, its location accuracy is not high, especially for focal depth because the velocity model used for the conventional intersection method is based on homogeneous or laterally homogeneous media, which is too simple. In order to improve the accuracy, we have modified the existing intersection method. In the modified approach, the earthquake loci are not assumed to be circular or hyperbolic and calculation accuracy is improved using a minimum traveltime tree algorithm for tracing rays. The numerical model shows that the modified method can locate earthquakes in complex velocity models.
文摘A conventional non-computerized numerical control （CNC） machine is updated by mounting a six degree-of-free （DOF） parallel mechanism on it, thus obtaining a new CNC one. The structure of this CNC milling machine is introduced, and the workpiece locating system and the post processing system of the cutter location （CL） data file are analyzed. The new machine has advantages of low costs, simple structure, good rigidity, and high precision. It is easy to be transformed and used to process the workpiece with a complex surface.
基金National Key Scientific Instrument and Equipment Development Project(No.2013YQ170539)
文摘Multi-sensor coordinate unification in dimensional metrology is used in order to get holistic, more accurate and reliable information about a workpiece based on several or multiple measurement values from one or more sensors. Because of the problem that standard ball is deficient as a standard artifact in the coordinate unification of high-precision composite measurement in two dimensions （2D） , a new method is proposed in this paper which uses angle gauge blocks as standard artifacts to achieve coordinate unification between the image sensor and the tactile probe. By comparing the standard ball with the angle gauge block as a standard artifact, theoretical analysis and experimental results are given to prove that it is more precise and more convenient to use angle gauge blocks as standard artifacts to achieve coordinate unification of high-precision composite measurement in two dimensions.
基金supported by the Specialized Research Fund for the Doctoral Program of Higher Education (No.20130132110023)by the National Natural Science Foundation of China (Nos.41230318,41074077)
文摘A velocity model is an important factor influencing microseismic event locations. We re- view the velocity modeling and inversion techniques for locating microseismic events in exploration for unconventional oil and gas reservoirs. We first describe the geological and geophysical characteristics of reservoir formations related to hydraulic fracturing in heterogeneity, anisotropy, and variability, then discuss the influences of velocity estimation, anisotropy model, and their time-lapse changes on the accuracy in determining microseismic event locations, and then survey some typical methods for building velocity models in locating event locations. We conclude that the three tangled physical attributes of reservoirs make microseismic monitoring very challenging. The uncertainties in velocity model and ignoring its anisotropies and its variations in hydraulic fracturing can cause systematic mislocations of microseismie events which are unacceptable in microseismic monitoring. So, we propose some potential ways for building accurate velocity models.
基金supported by National Basic Research Program of China (No.2010CB731800)
文摘Since GPS signals are unavailable for indoor navigation, current research mainly focuses on vision-based locating with a single mark. An obvious disadvantage with this approach is that locating will fail when the mark cannot be seen. The use of multiple marks can solve this problem. However, the extra process to design and identify different marks will significantly increase system complexity. In this paper, a novel vision-based locating method is proposed by using marks with feature points arranged in a radial shape. The feature points of the marks consist of inner points and outer points. The positions of the inner points are the same in all marks, while the positions of the outer points are different in different marks. Unlike traditional camera locating methods （the PnP methods）, the proposed method can calculate the camera location and the positions of the outer points simultaneously. Then the calculation results of the positions of the outer points are used to identify the mark. This method can make navigation with multiple marks more efficient. Simulations and real world experiments are carried out, and their results show that the proposed method is fast, accurate and robust to noise.
基金supported by the National Natural Science Foundation of China(Nos.61473307,61304120)
文摘Drogue recognition and 3D locating is a key problem during the docking phase of the autonomous aerial refueling （AAR）. To solve this problem, a novel and effective method based on monocular vision is presented in this paper. Firstly, by employing computer vision with red-ring-shape feature, a drogue detection and recognition algorithm is proposed to guarantee safety and ensure the robustness to the drogue diversity and the changes in environmental condi- tions, without using a set of infrared light emitting diodes （LEDs） on the parachute part of the dro- gue. Secondly, considering camera lens distortion, a monocular vision measurement algorithm for drogue 3D locating is designed to ensure the accuracy and real-time performance of the system, with the drogue attitude provided. Finally, experiments are conducted to demonstrate the effective- ness of the proposed method. Experimental results show the performances of the entire system in contrast with other methods, which validates that the proposed method can recognize and locate the drogue three dimensionally, rapidly and precisely.
文摘Technology of passive location has broad prospects in applications. In this paper, the method using the phase rate of change for the single observer passive location is introduced based on existing methods. One can obtain the direction of the target with phase information of two orthogonal interferometers on the observer and the radial distance with the corresponding phase rate of change. Then the target can be located with high speed and precision. A locating approach is given when the flying posture of t...
基金the National Key R&D Program of China (No. 2017YFC0906800)the National Natural Science Foundation of China (Nos. 21672166, 21635006, 21721005, 21728802) for the financial support
文摘In addition to the canonical nucleobases, a variety of chemical modifications have been identified presence in nucleic acids. These modifications have been demonstrated to involve in regulating the spatiotemporal expression of genes. Up to date, over 150 types of chemical modifications have been found existence in nucleic acids. Understanding the functional roles of modifications relies on deciphering the location information of modifications in nucleic acids. Analytical methods for studying nucleic acid modifications have greatly advanced in the last decade. To locate the modifications in nucleic acids, various mass spectrometry (MS)-based analytical strategies have been established. Recent progress in next-generation sequencing (NGS) in conjugation with immunoprecipitation, chemical reaction, enzyme-mediated mutation, or nanomaterials offer genome-wide or transcriptome-wide mapping of modifications, which greatly revolutionize the field of epigenetic modifications. Herein, we reviewed and summarized the established methods and the breakthrough of the techniques for locating modifications in nucleic acids. In addition, we discussed the principles, applications, advantages and drawbacks of these methods. We believe that with the rapid advancement of techniques and methods,the functions of nucleic acid modifications will be fully understood in the future.
基金Project(2006BAK04B03) supported by the National Basic Research Program of ChinaProject(CX2009B053) supported by Innovation Foundation for Postgraduate Students of Hunan Province,ChinaProject(2009ybfz08) supported by the Doctoral Dissertation of Central South University,China
文摘in order to achieve a more efficient way to accurately detect the position of the fire source of spontaneous combustion underground mine, a simple fire source locating method, based on infrared scanning system which can determine the point where the highest temperature on the surface of igniting ores occurs, was proposed. First, the differential equations that describe heat flow in ore body were presented and the relationship between the surface temperature distribution and the depth and intensity of inner fire source was established with a relatively simple heat transfer model. With the solution of equation, the expression of the relationship between the surface temperature distribution and the inner fire source was deduced and the mathematical-physical model of heat transfer process was set up. Then, with the model, visualization of fire source on the basis of MATLAB simulation platform was realized. The results show that： 1） within 10 m, when the detecting depth is less than 2 m, the temperature perturbation on ores surface can change rapidly, and then slowly; after 4 m, in contrast, it changes very little, and is even close to zero at 10 m; 2） When it is close to self-ignition duration and the detective depths are 2, 5 and 10 m, respectively, the maximum temperature differences are correspondingly 0.5, 0.04 and 0.005 ℃ in the scope of 1 m×1 m; under the same condition, the maximum temperature differences are 1.391, 0.136 and 0.018 ℃, respectively, in the scope of 2 m×2 m. Therefore, this system can be used to measure the temperature differences on the surface of ore body and determine the highest temperature point directly. Also, it is possible to determine the depth of fire source and its intensity by locating method of fire source indirectly.
基金supported by the National Natural Science Foundation of China(No.51375396)the Shaanxi Science and Technology Innovation Project Plan,China(No.2016KTCQ01-50)
文摘Fixture locating layout has a direct and influential impact on aeronautical thin-walled component(ATWC)manufacturing quality.The purpose is to develop a topological optimization method for ATWC fixture locating layout to minimize the manufacturing deformation.Firstly,a topological optimization model that takes the stiffness of ATWC as the objective function and the volume of the locating structure as the constraint is established.Secondly,ATWC and the locating structure are regarded as an integrated entity,and the variable-density method based topological optimization approach is adopted for the optimization of the locating structure using ABAQUS topology optimization module(ATOM).Thirdly,through a subsequent model reconstruction referring to the obtained topological structure,the optimal fixture locating layout is achieved.Finally,a case study is conducted to verify the proposed method and the comparison results with firefly algorithm(FA)coupled with finite element analysis(FEA)indicate that the number and positions of the locators for ATWC can be optimized simultaneously and successfully by the proposed topological optimization model.
基金the National Natural Science Foundation of China(Grant No.42192535)the Open Fund of Wuhan,Gravitation and Solid Earth Tides,National Observation and Research Station(No.WHYWZ202204)+1 种基金the Strategic Pioneer Science and Technology Special Project of the Chinese Academy of Sciences(Grant No.XDB18010304)the National Natural Science Foundation of China(Grant No.41874096).
文摘The Tibetan Plateau(TP)is the youngest orogenic belt resulting from a continental collision on the Earth.It is a natural laboratory for studying continental dynamics,such as continental convergence,plate subduction,and plateau uplift.Investigating the deep structure of the TP has always been a popular issue in geological research.The Moho is the boundary between the crust and the mantle and therefore plays a crucial role in the Earth’s structure.Parameters such as depth and lateral variation,as well as the fine structure of the crust-mantle interface,reveal the lithospheric dynamics in the TP.Two methods are generally employed to study the Moho surface:seismic detection and gravity inversion.Seismic detection has the characteristic of high precision,but it is limited to a few cross-sectional lines and is quite costly.It is not suitable for and cannot be carried out over a large area of the TP.The Moho depth over a large area can be obtained through gravity inversion,but this method is affected by the nature of gravity data,and the accuracy of the inversion method is lower than that of seismic detection.In this work,a high-precision gravity field model was selected.The Parker-Oldenburg interface inversion method was used,within the constraints of seismic observations,and the Bott iteration method was introduced to enhance the inversion efficiency.The Moho depth in the TP was obtained with high precision,consistent with the seismic detection results.The research results showed that the shape of the Moho in the TP is complex and the variation range is large,reaching 60−80 km.In contrast with the adjacent area,a clear zone of sharp variation appears at the edge of the plateau.In the interior of the TP,the buried depth of the Moho is characterized by two depressions and two uplifts.To the south of the Yarlung Zangbo River,the Moho inclines to the north,and to the north,the Moho depresses downward,which was interpreted as the Indian plate subducting to the north below Xizang.The Moho depression on the north side of the Qiangtang block,reaching 72 km deep,may be a result of the southward subduction of the lithosphere.The Moho uplift of the Qiangtang block has the same strike as the Bangong−Nujiang suture zone,which may indicate that the area is compensated by a low-density and low-velocity mantle.
