With the increasing integration of renewable energy,microgrids are increasingly facing stability challenges,primarily due to the lack of inherent inertia in inverter-dominated systems,which is traditionally provided b...With the increasing integration of renewable energy,microgrids are increasingly facing stability challenges,primarily due to the lack of inherent inertia in inverter-dominated systems,which is traditionally provided by synchronous generators.To address this critical issue,Virtual Synchronous Generator(VSG)technology has emerged as a highly promising solution by emulating the inertia and damping characteristics of conventional synchronous generators.To enhance the operational efficiency of virtual synchronous generators(VSGs),this study employs smallsignal modeling analysis,root locus methods,and synchronous generator power-angle characteristic analysis to comprehensively evaluate how virtual inertia and damping coefficients affect frequency stability and power output during transient processes.Based on these analyses,an adaptive control strategy is proposed:increasing the virtual inertia when the rotor angular velocity undergoes rapid changes,while strengthening the damping coefficient when the speed deviation exceeds a certain threshold to suppress angular velocity oscillations.To validate the effectiveness of the proposed method,a grid-connected VSG simulation platform was developed inMATLAB/Simulink.Comparative simulations demonstrate that the proposed adaptive control strategy outperforms conventional VSGmethods by significantly reducing grid frequency deviations and shortening active power response time during active power command changes and load disturbances.This approach enhances microgrid stability and dynamic performance,confirming its viability for renewable-dominant power systems.Future work should focus on experimental validation and real-world parameter optimization,while further exploring the strategy’s effectiveness in improvingVSG low-voltage ride-through(LVRT)capability and power-sharing applications in multi-parallel configurations.展开更多
The low-pass fi ltering eff ect of the Earth results in the absorption and attenuation of the high-frequency components of seismic signals by the stratum during propagation.Hence,seismic data have low resolution.Consi...The low-pass fi ltering eff ect of the Earth results in the absorption and attenuation of the high-frequency components of seismic signals by the stratum during propagation.Hence,seismic data have low resolution.Considering the limitations of traditional high-frequency compensation methods,this paper presents a new method based on adaptive generalized S transform.This method is based on the study of frequency spectrum attenuation law of seismic signals,and the Gauss window function of adaptive generalized S transform is used to fi t the attenuation trend of seismic signals to seek the optimal Gauss window function.The amplitude spectrum compensation function constructed using the optimal Gauss window function is used to modify the time-frequency spectrum of the adaptive generalized S transform of seismic signals and reconstruct seismic signals to compensate for high-frequency attenuation.Practical data processing results show that the method can compensate for the high-frequency components that are absorbed and attenuated by the stratum,thereby eff ectively improving the resolution and quality of seismic data.展开更多
High-frequency oscillation(HFO)of gridconnected wind power generation systems(WPGS)is one of the most critical issues in recent years that threaten the safe access of WPGS to the grid.Ensuring the WPGS can damp HFO is...High-frequency oscillation(HFO)of gridconnected wind power generation systems(WPGS)is one of the most critical issues in recent years that threaten the safe access of WPGS to the grid.Ensuring the WPGS can damp HFO is becoming more and more vital for the development of wind power.The HFO phenomenon of wind turbines under different scenarios usually has different mechanisms.Hence,engineers need to acquire the working mechanisms of the different HFO damping technologies and select the appropriate one to ensure the effective implementation of oscillation damping in practical engineering.This paper introduces the general assumptions of WPGS when analyzing HFO,systematically summarizes the reasons for the occurrence of HFO in different scenarios,deeply analyses the key points and difficulties of HFO damping under different scenarios,and then compares the technical performances of various types of HFO suppression methods to provide adequate references for engineers in the application of technology.Finally,this paper discusses possible future research difficulties in the problem of HFO,as well as the possible future trends in the demand for HFO damping.展开更多
We give a new result on the construction of K-frame generators for unitary systems by using the pseudo-inverses of involved operators,which provides an improvement to one known result on this topic.We also introduce t...We give a new result on the construction of K-frame generators for unitary systems by using the pseudo-inverses of involved operators,which provides an improvement to one known result on this topic.We also introduce the concept of K-woven generators for unitary systems,by means of which we investigate the weaving properties of K-frame generators for unitary systems.展开更多
Salience theory has been proposed as a new stock trading strategy.To assess the validity of this proposal,a complex decision trading system was constructed based on salience theory,a variational mode decomposition(VMD...Salience theory has been proposed as a new stock trading strategy.To assess the validity of this proposal,a complex decision trading system was constructed based on salience theory,a variational mode decomposition(VMD)model,a bidirectional gated recurrent unit(BiGRU)model,and high-frequency trading.The system selected 30 Chinese new energy concept stocks,ranked the stocks using salience theory,and selected the top and bottom three stocks for two portfolios.Twelve stages were established,following which the VMD and BiGRU models were applied to the predictions.The final predicted annualized returns for the high ST(salience theory value)group A(GA)and low ST group B(GB)were 194.06%and 165.88%,respectively.This finding validates the powerful utility of salience theory and deep learning to analyze the Chinese new energy market.Moreover,it explains the theoretical practicality issues that the short selling restriction is the essential reason,or even perhaps the only reason,that leads to the strength of salience theory.展开更多
The oil-based mud(OBM) borehole measurement environment presents significant limitations on the application of existing electrical logging instruments in high-resistance formations. In this paper, we propose a novel l...The oil-based mud(OBM) borehole measurement environment presents significant limitations on the application of existing electrical logging instruments in high-resistance formations. In this paper, we propose a novel logging method for detection of high-resistance formations in OBM using highfrequency electrodes. The method addresses the issue of shallow depth of investigation(DOI) in existing electrical logging instruments, while simultaneously ensuring the vertical resolution. Based on the principle of current continuity, the total impedance of the loop is obtained by equating the measurement loop to the series form of a capacitively coupled circuit. and its validity is verified in a homogeneous formation model and a radial two-layer formation model with a mud standoff. Then, the instrument operating frequency and electrode system parameters were preferentially determined by numerical simulation, and the effect of mud gap on impedance measurement was investigated. Subsequently, the DOI of the instrument was investigated utilizing the pseudo-geometric factor defined by the real part of impedance. It was determined that the detection depth of the instrument is 8.74 cm, while the effective vertical resolution was not less than 2 cm. Finally, a focused high-frequency electrode-type instrument was designed by introducing a pair of focused electrodes, which effectively enhanced the DOI of the instrument and was successfully deployed in the Oklahoma formation model. The simulation results demonstrate that the novel method can achieve a detection depth of 17.40 cm in highly-resistive formations drilling with OBM, which is approximately twice the depth of detection of the existing oil-based mud microimager instruments. Furthermore, its effective vertical resolution remains at or above 2 cm,which is comparable to the resolution of the existing OBM electrical logging instrument.展开更多
Objective:To analyze the significance of high-frequency ultrasound in differentiating benign and malignant breast micronodules.Methods:Eighty-five patients with breast micronodules admitted for diagnosis between Octob...Objective:To analyze the significance of high-frequency ultrasound in differentiating benign and malignant breast micronodules.Methods:Eighty-five patients with breast micronodules admitted for diagnosis between October 2022 and October 2024 were selected for high-frequency ultrasound diagnosis.The diagnostic efficacy of high-frequency ultrasound was evaluated by comparing it with the results of surgical pathology.Results:High-frequency ultrasound detected 50 benign nodules,primarily breast fibroadenomas,and 35 malignant nodules,mainly breast ductal carcinoma in situ.Based on surgical pathology results,the diagnostic accuracy of high-frequency ultrasound was 96.47%,specificity was 97.96%,and sensitivity was 94.44%.In high-frequency ultrasound diagnosis,the proportion of grade III and IV blood flow in malignant nodules was higher than that in benign nodules,while the proportion of regular shape and clear margins was lower.The proportion of microcalcifications and posterior echo attenuation was higher in malignant nodules,and the resistance index(RI)and peak blood flow velocity were lower than those in benign nodules(P<0.05).Conclusion:High-frequency ultrasound can effectively differentiate benign and malignant breast micronodules,determine specific nodule types,and exhibits high diagnostic accuracy and sensitivity.Additionally,benign and malignant nodules can be differentiated based on the grading of blood flow signals,sonographic features,and blood flow velocity,providing reasonable guidance for subsequent treatment plans.展开更多
This review paper examines the various types of electrical generators used to convert wave energy into electrical energy.The focus is on both linear and rotary generators,including their design principles,operational ...This review paper examines the various types of electrical generators used to convert wave energy into electrical energy.The focus is on both linear and rotary generators,including their design principles,operational efficiencies,and technological advancements.Linear generators,such as Induction,permanent magnet synchronous,and switched reluctance types,are highlighted for their direct conversion capability,eliminating the need for mechanical gearboxes.Rotary Induction generators,permanent magnet synchronous generators,and doubly-fed Induction generators are evaluated for their established engineering principles and integration with existing grid infrastructure.The paper discusses the historical development,environmental benefits,and ongoing advancements in wave energy technologies,emphasizing the increasing feasibility and scalability of wave energy as a renewable source.Through a comprehensive analysis,this review provides insights into the current state and future prospects of electrical generators in wave energy conversion,underscoring their potential to significantly reduce reliance on fossil fuels and mitigate environmental impacts.展开更多
China has a long history of coal mining,among which open-pit coal mines have a large number of small coal mine goafs underground.The distribution,shape,structure and other characteristics of goafs are isolated and dis...China has a long history of coal mining,among which open-pit coal mines have a large number of small coal mine goafs underground.The distribution,shape,structure and other characteristics of goafs are isolated and discontinuous,and there is no definite geological law to follow,which seriously threatens the safety of coal mine production and personnel life.Conventional ground geophysical methods have low accuracy in detecting goaf areas affected by mechanical interference from open-pit mines,especially for waterless goaf areas,which cannot be detected by existing methods.This article proposes the use of high-frequency electromagnetic waves for goaf detection.The feasibility of using drilling radar to detect goaf was theoretically analyzed,and a goaf detection model was established.The response characteristics of different fillers in the goaf under different frequencies of high-frequency electromagnetic waves were simulated and analyzed.In a certain open-pit mine in Inner Mongolia,100MHz high-frequency electromagnetic waves were used to detect the goaf through directional drilling on the ground.After detection,excavation verification was carried out,and the location of one goaf detected was verified.The results of engineering practice show that the application of high-frequency electromagnetic waves in goaf detection expands the detection radius of boreholes,has the advantages of high efficiency and accuracy,and has important theoretical and practical significance.展开更多
New electric power systems characterized by a high proportion of renewable energy and power electronics equipment face significant challenges due to high-frequency(HF)electromagnetic interference from the high-speed s...New electric power systems characterized by a high proportion of renewable energy and power electronics equipment face significant challenges due to high-frequency(HF)electromagnetic interference from the high-speed switching of power converters.To address this situation,this paper offers an in-depth review of HF interference problems and challenges originating from power electronic devices.First,the root cause of HF electromagnetic interference,i.e.,the resonant response of the parasitic parameters of the system to high-speed switching transients,is analyzed,and various scenarios of HF interference in power systems are highlighted.Next,the types of HF interference are summarized,with a focus on common-mode interference in grounding systems.This paper thoroughly reviews and compares various suppression methods for conducted HF interference.Finally,the challenges involved and suggestions for addressing emerging HF interference problems from the perspective of both power electronics equipment and power systems are discussed.This review aims to offer a structured understanding of HF interference problems and their suppression techniques for researchers and practitioners.展开更多
Single-shot ultrafast compressed imaging(UCI)is an effective tool for studying ultrafast dynamics in physics,chemistry,or material science because of its excellent high frame rate and large frame number.However,the ra...Single-shot ultrafast compressed imaging(UCI)is an effective tool for studying ultrafast dynamics in physics,chemistry,or material science because of its excellent high frame rate and large frame number.However,the random code(Rcode)used in traditional UCI will lead to low-frequency noise covering high-frequency information due to its uneven sampling interval,which is a great challenge in the fidelity of large-frame reconstruction.Here,a high-frequency enhanced compressed active photography(H-CAP)is proposed.By uniformizing the sampling interval of R-code,H-CAP capture the ultrafast process with a random uniform sampling mode.This sampling mode makes the high-frequency sampling energy dominant,which greatly suppresses the low-frequency noise blurring caused by R-code and achieves high-frequency information of image enhanced.The superior dynamic performance and large-frame reconstruction ability of H-CAP are verified by imaging optical self-focusing effect and static object,respectively.We applied H-CAP to the spatial-temporal characterization of double-pulse induced silicon surface ablation dynamics,which is performed within 220 frames in a single-shot of 300 ps.H-CAP provides a high-fidelity imaging method for observing ultrafast unrepeatable dynamic processes with large frames.展开更多
Objective:To analyze the therapeutic effect of high-frequency electrosurgical knife surgery guided by painless digestive endoscopy(PDE)in elderly patients with gastrointestinal polyps(GP).Methods:A total of 100 elderl...Objective:To analyze the therapeutic effect of high-frequency electrosurgical knife surgery guided by painless digestive endoscopy(PDE)in elderly patients with gastrointestinal polyps(GP).Methods:A total of 100 elderly GP patients admitted between June 2021 and December 2022 were selected.Patients were randomly divided into two groups:the painless group(50 cases)underwent high-frequency electrosurgical knife surgery guided by PDE,while the conventional group(50 cases)underwent the same surgery guided by traditional digestive endoscopy(DE).The total treatment efficacy,perioperative indicators,gastrointestinal hormone levels,oxidative stress(OS)markers,and complication rates were compared between the two groups.Results:The total treatment efficacy in the painless group was higher than that in the conventional group,and perioperative indicators were superior in the painless group(P<0.05).One week after treatment,the gastrointestinal hormone levels and OS-related markers in the painless group were better than those in the conventional group(P<0.05).The complication rate in the painless group was lower than in the conventional group(P<0.05).Conclusion:High-frequency electrosurgical knife surgery guided by PDE improves the effectiveness of polyp removal in elderly GP patients and accelerates postoperative recovery.It also protects gastrointestinal function,reduces postoperative OS,and ensures higher surgical safety.展开更多
Soft magnetic composites made from metallic magnetic particles with an easy magnetization plane(referred to as easy-plane metallic soft magnetic composites(SMC))are considered ideal materials for the next generation o...Soft magnetic composites made from metallic magnetic particles with an easy magnetization plane(referred to as easy-plane metallic soft magnetic composites(SMC))are considered ideal materials for the next generation of power electronic devices.This advantage is attributed to their ability to maintain high permeability at elevated frequencies.Despite these advantages,a definitive mathematical model that connects the high-frequency magnetic properties(e.g.,effective permeability)of easy-plane metallic SMCs to the intrinsic properties of the particles is still lacking.In this work,a theoretical calculation model for the effective permeability of easy-plane metallic SMCs was formulated.This model was derived from a skin effect-corrected Landau-Lifshitz-Gilbert(LLG)equation and integrated with effective medium theory incorporating inter-particle interaction.To validate the model,we prepared samples of easy-plane Y_(2)Co_(17)particle/PU SMCs with varying particle sizes and volume fractions.The experimental results showed a strong agreement with the calculated values.This research offers critical theoretical backing for the design and optimization of soft magnetic materials intended for high-frequency applications.展开更多
High-frequency pulsed(HFP)gas tungsten arc welding(GTAW)has shown excellent performance in welding of aluminum alloys in recent years,which makes itself a promisingly potential technique for part manufacturing in avia...High-frequency pulsed(HFP)gas tungsten arc welding(GTAW)has shown excellent performance in welding of aluminum alloys in recent years,which makes itself a promisingly potential technique for part manufacturing in aviation industry.However,existing researches generally focuses on the effect of a single parameter while lacks multivariable researches.Considering of the fact that gap and misalignment are inevitable in real part clamping,adaptive intelligent welding is usually used during automatic manufacturing,which means under the control of filler wire amount per length of a weld,other parameters including current,welding speed and wire feed speed during one single weld are changing according to the specific clamping situation.Therefore,the influence of specific energy input led by different welding parameters within one adaptive welding program on microstructure and mechanical property of the weld needs to be clarified.This study investigates the effect of welding heat input(ranging from 1048.3 J/mm to 825.6 J/mm within one adaptive welding program control)on the formation quality of 3.25 mm thick 6061 aluminum alloy joints fabricated by HFP-GTAW with 4043 filler wire.According to the obtained results,non-monotonic relationship between heat input and porosity,with an optimal minimum of 4.92%achieved at an intermediate heat input of 856.8 J/mm.The 21.2%decrease of energy input during welding process would reduce the average grain size in the weld center and adjacent to fusion line by 18.6%and 19.4%,respectively.The ratios between fluctuation range to minimum value in average yield and the relative ranges of yield strength and ultimate tensile strength across the tested heat inputs were 14.7%and 12.7%,respectively.The findings provide a general overview on how the microstructure and mechanical properties would fluctuate in an adaptively controlled HFP-GTAW fabricated aluminum alloy weld.展开更多
With the evolution of DC distribution networks from traditional radial topologies to more complex multi-branch structures,the number of measurement points supporting synchronous communication remains relatively limite...With the evolution of DC distribution networks from traditional radial topologies to more complex multi-branch structures,the number of measurement points supporting synchronous communication remains relatively limited.This poses challenges for conventional fault distance estimation methods,which are often tailored to simple topologies and are thus difficult to apply to large-scale,multi-node DC networks.To address this,a fault distance estimation method based on sparse measurement of high-frequency electrical quantities is proposed in this paper.First,a preliminary fault line identification model based on compressed sensing is constructed to effectively narrow the fault search range and improve localization efficiency.Then,leveraging the high-frequency impedance characteristics and the voltage-current relationship of electrical quantities,a fault distance estimation approach based on high-frequency measurements from both ends of a line is designed.This enables accurate distance estimation even when the measurement devices are not directly placed at both ends of the faulted line,overcoming the dependence on specific sensor placement inherent in traditional methods.Finally,to further enhance accuracy,an optimization model based on minimizing the high-frequency voltage error at the fault point is introduced to reduce estimation error.Simulation results demonstrate that the proposed method achieves a fault distance estimation error of less than 1%under normal conditions,and maintains good performance even under adverse scenarios.展开更多
Moist-electric power generation is an emerging energy technology that collects energy from the environment and converts it into electrical energy through the interaction of moisture with materials.Although most of the...Moist-electric power generation is an emerging energy technology that collects energy from the environment and converts it into electrical energy through the interaction of moisture with materials.Although most of the moist-electric generators(MEGs)have achieved continuous breakthroughs in open-circuit voltage(V_(OC))and duration at present,it has been proven to be a challenge to maintain a continuous relatively high short-circuit current(ISC).Herein,electrospun nanofiber-based Janus heterogeneous film with both moisture absorption and moisture evaporation characteristics is prepared,and excellent power output performance MEGs have been fabricated by setting perforated electrode at each side respectively.Results have demonstrated the Janus nanofiber moist-electric generator(JFMEG)can generate a V_(OC)of 0.6 V with a continuous power generation time of up to 30 d and a maximum I_(SC)of about 44µA cm^(−2)at 95%relative humidity.In addition,the I_(SC)maintenance time above 10µA cm^(−2)is close to 40 h The integrated device can power commercial equipment and can be used for self-powered breath detection.Additionally,the self-powered field-effect transistor by JFMEG has been fabricated,demonstrating excellent output characteristics.The detailed working mechanism of JFMEG and the influencing factors of power generation performance are systematically analyzed,which can provide reference for the performance improvement of similar moist-electric devices.展开更多
Dual wavelength high-frequency chaos based on nonlinear effects is generated in an erbium-doped fibre ring laser, where tunable filters （TFs） are used to select the wavelength. A receiving fibre laser with an open-l...Dual wavelength high-frequency chaos based on nonlinear effects is generated in an erbium-doped fibre ring laser, where tunable filters （TFs） are used to select the wavelength. A receiving fibre laser with an open-loop structure is constructed with identical parameters as the transmitting fibre laser. By tuning the TFs and the fibre delay line in the receiving fibre laser, chaos synchronization has been observed at anyone the two wavelengths after the chaos is transmitted over 1 km. It is of far reaching importance to construct the high capacity chaos communication system.展开更多
Moisture can be utilized as a tremendous source of electricity by emerging moisture-electric generator (MEG). The directional moving of water molecules, which can be driven by gradient of functional groups and water e...Moisture can be utilized as a tremendous source of electricity by emerging moisture-electric generator (MEG). The directional moving of water molecules, which can be driven by gradient of functional groups and water evaporation, is vital for the electricity generation. Here, MEG composed of Graphene Oxide (GO-MEG) with gradient channels is constructed by one-step ice-templating technique, achieving a voltage of 0.48 V and a current of ~ 5.64 µA under humid condition. The gradient channels introduce Laplace pressure difference to the absorbed water droplets and electric potential between two side of the GO-MEG, facilitating the charge flow. Output voltage can be easily enhanced by increasing the structural gradient, reducing the channel size, incorporation of chemical gradient, or scaling up the number of GO-MEG units in series. This work not only provides insight for the working mechanism of GO-MEG with structural gradient, which can be applied to other functional materials, but also establishes a convenient and ecofriendly strategy to construct and finely tune the structural gradient in porous materials.展开更多
The internal hotspot temperature rise prediction in nanocrystalline high-frequency transformers(nanoHFTs) is essential to ensure reliable operation. This paper presents a three-dimensional thermal network(3DTN) model ...The internal hotspot temperature rise prediction in nanocrystalline high-frequency transformers(nanoHFTs) is essential to ensure reliable operation. This paper presents a three-dimensional thermal network(3DTN) model for epoxy resin encapsulated nano HFTs, which aims to precisely predict the temperature distribution inside the transformer in combination with the finite element method(FEM). A magnetothermal bidirectional coupling 3DTN model is established by analyzing the thermal conduction between the core, windings, and epoxy resin, while also considering the convection and radiation heat transfer mechanisms on the surface of the epoxy resin. The model considers the impact of loss distribution in the core and windings on the temperature field and adopts a simplified 1/2 thermal network model to reduce computational complexity. Furthermore, the results of FEM are compared with experimental results to verify the accuracy of the 3DTN model in predicting the temperature rise of nano HFT. The results show that the 3DTN model reduces errors by an average of 5.25% over the traditional two-dimensional thermal network(2DTN) model, particularly for temperature distributions in the windings and core. This paper provides a temperature rise prediction method for the thermal design and offers a theoretical basis and engineering guidance for the optimization of their thermal management systems.展开更多
The ocean,as one of Earth’s largest natural resources,covers over 70% of the planet’s surface and holds vast water energy potential.Building on this context,this study designs a hybrid generator(WWR-TENG)that integr...The ocean,as one of Earth’s largest natural resources,covers over 70% of the planet’s surface and holds vast water energy potential.Building on this context,this study designs a hybrid generator(WWR-TENG)that integrates a triboelectric nanogenerator(TENG)and an electromagnetic generator(EMG).TENG is a new technology that can capture mechanical energy from the environment and convert it into electrical energy,and is particularly suitable for common natural or man-made power sources such as human movement,wind power,and water flow.EMG is a device that converts mechanical energy into electrical energy through the principle of electromagnetic induction and can usually provide stable power output.The composite design leverages the complementary advantages of both technologies to efficiently capture and convert marine wave energy.By combining the TENG’s high energy conversion efficiency,lowcost,lightweight structure,and simple designwith the EMG’s capabilities,the systemprovides a sustainable solution for marine energy development.Experimental results demonstrate that at a rotational speed of 3.0 r/s,the TENG component of the WWR-TENG achieves an open-circuit voltage of approximately 280 V and a shortcircuit current of 20μA.At the same time,the EMG unit exhibits an open-circuit voltage of 14 V and a short-circuit current of 14 mA.Furthermore,when integrated with a power management circuit,the WWR-TENG charges a 680μF capacitor to 3 V within 10 s at a rotational speed of 3.0 r/s.A simulated wave environment platform was established,enabling the WWR-TENG to maintain the thermo-hygrometer in normal operation under simulated wave conditions.These findings validate the hybrid system’s effectiveness in harnessing and storingwave energy,highlighting its potential for practical marine energy applications.展开更多
基金financially supported by the Talent Initiation Fund of Wuxi University(550220008).
文摘With the increasing integration of renewable energy,microgrids are increasingly facing stability challenges,primarily due to the lack of inherent inertia in inverter-dominated systems,which is traditionally provided by synchronous generators.To address this critical issue,Virtual Synchronous Generator(VSG)technology has emerged as a highly promising solution by emulating the inertia and damping characteristics of conventional synchronous generators.To enhance the operational efficiency of virtual synchronous generators(VSGs),this study employs smallsignal modeling analysis,root locus methods,and synchronous generator power-angle characteristic analysis to comprehensively evaluate how virtual inertia and damping coefficients affect frequency stability and power output during transient processes.Based on these analyses,an adaptive control strategy is proposed:increasing the virtual inertia when the rotor angular velocity undergoes rapid changes,while strengthening the damping coefficient when the speed deviation exceeds a certain threshold to suppress angular velocity oscillations.To validate the effectiveness of the proposed method,a grid-connected VSG simulation platform was developed inMATLAB/Simulink.Comparative simulations demonstrate that the proposed adaptive control strategy outperforms conventional VSGmethods by significantly reducing grid frequency deviations and shortening active power response time during active power command changes and load disturbances.This approach enhances microgrid stability and dynamic performance,confirming its viability for renewable-dominant power systems.Future work should focus on experimental validation and real-world parameter optimization,while further exploring the strategy’s effectiveness in improvingVSG low-voltage ride-through(LVRT)capability and power-sharing applications in multi-parallel configurations.
基金This research is supported by the National Science and Technology Major Project of China(No.2011ZX05024-001-03)the Natural Science Basic Research Plan in Shaanxi Province of China(No.2021JQ-588)Innovation Fund for graduate students of Xi’an Shiyou University(No.YCS17111017).
文摘The low-pass fi ltering eff ect of the Earth results in the absorption and attenuation of the high-frequency components of seismic signals by the stratum during propagation.Hence,seismic data have low resolution.Considering the limitations of traditional high-frequency compensation methods,this paper presents a new method based on adaptive generalized S transform.This method is based on the study of frequency spectrum attenuation law of seismic signals,and the Gauss window function of adaptive generalized S transform is used to fi t the attenuation trend of seismic signals to seek the optimal Gauss window function.The amplitude spectrum compensation function constructed using the optimal Gauss window function is used to modify the time-frequency spectrum of the adaptive generalized S transform of seismic signals and reconstruct seismic signals to compensate for high-frequency attenuation.Practical data processing results show that the method can compensate for the high-frequency components that are absorbed and attenuated by the stratum,thereby eff ectively improving the resolution and quality of seismic data.
基金supported in part by the Fundamental Research Funds for the Central Universities under Grant 2682023CX019National Natural Science Foundation of China under Grant U23B6007 and Grant 52307141Sichuan Science and Technology Program under Grant 2024NSFSC0115。
文摘High-frequency oscillation(HFO)of gridconnected wind power generation systems(WPGS)is one of the most critical issues in recent years that threaten the safe access of WPGS to the grid.Ensuring the WPGS can damp HFO is becoming more and more vital for the development of wind power.The HFO phenomenon of wind turbines under different scenarios usually has different mechanisms.Hence,engineers need to acquire the working mechanisms of the different HFO damping technologies and select the appropriate one to ensure the effective implementation of oscillation damping in practical engineering.This paper introduces the general assumptions of WPGS when analyzing HFO,systematically summarizes the reasons for the occurrence of HFO in different scenarios,deeply analyses the key points and difficulties of HFO damping under different scenarios,and then compares the technical performances of various types of HFO suppression methods to provide adequate references for engineers in the application of technology.Finally,this paper discusses possible future research difficulties in the problem of HFO,as well as the possible future trends in the demand for HFO damping.
基金Supported by NSFC(Nos.12361028,11761057)Science Foundation of Jiangxi Education Department(Nos.GJJ202302,GJJ202303,GJJ202319).
文摘We give a new result on the construction of K-frame generators for unitary systems by using the pseudo-inverses of involved operators,which provides an improvement to one known result on this topic.We also introduce the concept of K-woven generators for unitary systems,by means of which we investigate the weaving properties of K-frame generators for unitary systems.
基金supported by the National Natural Science Foundation of China(Grant Nos.72032006 and 92146005).
文摘Salience theory has been proposed as a new stock trading strategy.To assess the validity of this proposal,a complex decision trading system was constructed based on salience theory,a variational mode decomposition(VMD)model,a bidirectional gated recurrent unit(BiGRU)model,and high-frequency trading.The system selected 30 Chinese new energy concept stocks,ranked the stocks using salience theory,and selected the top and bottom three stocks for two portfolios.Twelve stages were established,following which the VMD and BiGRU models were applied to the predictions.The final predicted annualized returns for the high ST(salience theory value)group A(GA)and low ST group B(GB)were 194.06%and 165.88%,respectively.This finding validates the powerful utility of salience theory and deep learning to analyze the Chinese new energy market.Moreover,it explains the theoretical practicality issues that the short selling restriction is the essential reason,or even perhaps the only reason,that leads to the strength of salience theory.
基金the National Natural Science Foundation of China(42074134,42474152,42374150)CNPC Innovation Found(2024DQ02-0152).
文摘The oil-based mud(OBM) borehole measurement environment presents significant limitations on the application of existing electrical logging instruments in high-resistance formations. In this paper, we propose a novel logging method for detection of high-resistance formations in OBM using highfrequency electrodes. The method addresses the issue of shallow depth of investigation(DOI) in existing electrical logging instruments, while simultaneously ensuring the vertical resolution. Based on the principle of current continuity, the total impedance of the loop is obtained by equating the measurement loop to the series form of a capacitively coupled circuit. and its validity is verified in a homogeneous formation model and a radial two-layer formation model with a mud standoff. Then, the instrument operating frequency and electrode system parameters were preferentially determined by numerical simulation, and the effect of mud gap on impedance measurement was investigated. Subsequently, the DOI of the instrument was investigated utilizing the pseudo-geometric factor defined by the real part of impedance. It was determined that the detection depth of the instrument is 8.74 cm, while the effective vertical resolution was not less than 2 cm. Finally, a focused high-frequency electrode-type instrument was designed by introducing a pair of focused electrodes, which effectively enhanced the DOI of the instrument and was successfully deployed in the Oklahoma formation model. The simulation results demonstrate that the novel method can achieve a detection depth of 17.40 cm in highly-resistive formations drilling with OBM, which is approximately twice the depth of detection of the existing oil-based mud microimager instruments. Furthermore, its effective vertical resolution remains at or above 2 cm,which is comparable to the resolution of the existing OBM electrical logging instrument.
文摘Objective:To analyze the significance of high-frequency ultrasound in differentiating benign and malignant breast micronodules.Methods:Eighty-five patients with breast micronodules admitted for diagnosis between October 2022 and October 2024 were selected for high-frequency ultrasound diagnosis.The diagnostic efficacy of high-frequency ultrasound was evaluated by comparing it with the results of surgical pathology.Results:High-frequency ultrasound detected 50 benign nodules,primarily breast fibroadenomas,and 35 malignant nodules,mainly breast ductal carcinoma in situ.Based on surgical pathology results,the diagnostic accuracy of high-frequency ultrasound was 96.47%,specificity was 97.96%,and sensitivity was 94.44%.In high-frequency ultrasound diagnosis,the proportion of grade III and IV blood flow in malignant nodules was higher than that in benign nodules,while the proportion of regular shape and clear margins was lower.The proportion of microcalcifications and posterior echo attenuation was higher in malignant nodules,and the resistance index(RI)and peak blood flow velocity were lower than those in benign nodules(P<0.05).Conclusion:High-frequency ultrasound can effectively differentiate benign and malignant breast micronodules,determine specific nodule types,and exhibits high diagnostic accuracy and sensitivity.Additionally,benign and malignant nodules can be differentiated based on the grading of blood flow signals,sonographic features,and blood flow velocity,providing reasonable guidance for subsequent treatment plans.
文摘This review paper examines the various types of electrical generators used to convert wave energy into electrical energy.The focus is on both linear and rotary generators,including their design principles,operational efficiencies,and technological advancements.Linear generators,such as Induction,permanent magnet synchronous,and switched reluctance types,are highlighted for their direct conversion capability,eliminating the need for mechanical gearboxes.Rotary Induction generators,permanent magnet synchronous generators,and doubly-fed Induction generators are evaluated for their established engineering principles and integration with existing grid infrastructure.The paper discusses the historical development,environmental benefits,and ongoing advancements in wave energy technologies,emphasizing the increasing feasibility and scalability of wave energy as a renewable source.Through a comprehensive analysis,this review provides insights into the current state and future prospects of electrical generators in wave energy conversion,underscoring their potential to significantly reduce reliance on fossil fuels and mitigate environmental impacts.
文摘China has a long history of coal mining,among which open-pit coal mines have a large number of small coal mine goafs underground.The distribution,shape,structure and other characteristics of goafs are isolated and discontinuous,and there is no definite geological law to follow,which seriously threatens the safety of coal mine production and personnel life.Conventional ground geophysical methods have low accuracy in detecting goaf areas affected by mechanical interference from open-pit mines,especially for waterless goaf areas,which cannot be detected by existing methods.This article proposes the use of high-frequency electromagnetic waves for goaf detection.The feasibility of using drilling radar to detect goaf was theoretically analyzed,and a goaf detection model was established.The response characteristics of different fillers in the goaf under different frequencies of high-frequency electromagnetic waves were simulated and analyzed.In a certain open-pit mine in Inner Mongolia,100MHz high-frequency electromagnetic waves were used to detect the goaf through directional drilling on the ground.After detection,excavation verification was carried out,and the location of one goaf detected was verified.The results of engineering practice show that the application of high-frequency electromagnetic waves in goaf detection expands the detection radius of boreholes,has the advantages of high efficiency and accuracy,and has important theoretical and practical significance.
基金supported by the science and technology project of State Grid Shanghai Municipal Electric Power Company(No.52094023003L).
文摘New electric power systems characterized by a high proportion of renewable energy and power electronics equipment face significant challenges due to high-frequency(HF)electromagnetic interference from the high-speed switching of power converters.To address this situation,this paper offers an in-depth review of HF interference problems and challenges originating from power electronic devices.First,the root cause of HF electromagnetic interference,i.e.,the resonant response of the parasitic parameters of the system to high-speed switching transients,is analyzed,and various scenarios of HF interference in power systems are highlighted.Next,the types of HF interference are summarized,with a focus on common-mode interference in grounding systems.This paper thoroughly reviews and compares various suppression methods for conducted HF interference.Finally,the challenges involved and suggestions for addressing emerging HF interference problems from the perspective of both power electronics equipment and power systems are discussed.This review aims to offer a structured understanding of HF interference problems and their suppression techniques for researchers and practitioners.
基金supported by the National Science Foundation of China(No.12127806,No.62175195 and No.12304382)the International Joint Research Laboratory for Micro/Nano Manufacturing and Measurement Technologies.
文摘Single-shot ultrafast compressed imaging(UCI)is an effective tool for studying ultrafast dynamics in physics,chemistry,or material science because of its excellent high frame rate and large frame number.However,the random code(Rcode)used in traditional UCI will lead to low-frequency noise covering high-frequency information due to its uneven sampling interval,which is a great challenge in the fidelity of large-frame reconstruction.Here,a high-frequency enhanced compressed active photography(H-CAP)is proposed.By uniformizing the sampling interval of R-code,H-CAP capture the ultrafast process with a random uniform sampling mode.This sampling mode makes the high-frequency sampling energy dominant,which greatly suppresses the low-frequency noise blurring caused by R-code and achieves high-frequency information of image enhanced.The superior dynamic performance and large-frame reconstruction ability of H-CAP are verified by imaging optical self-focusing effect and static object,respectively.We applied H-CAP to the spatial-temporal characterization of double-pulse induced silicon surface ablation dynamics,which is performed within 220 frames in a single-shot of 300 ps.H-CAP provides a high-fidelity imaging method for observing ultrafast unrepeatable dynamic processes with large frames.
文摘Objective:To analyze the therapeutic effect of high-frequency electrosurgical knife surgery guided by painless digestive endoscopy(PDE)in elderly patients with gastrointestinal polyps(GP).Methods:A total of 100 elderly GP patients admitted between June 2021 and December 2022 were selected.Patients were randomly divided into two groups:the painless group(50 cases)underwent high-frequency electrosurgical knife surgery guided by PDE,while the conventional group(50 cases)underwent the same surgery guided by traditional digestive endoscopy(DE).The total treatment efficacy,perioperative indicators,gastrointestinal hormone levels,oxidative stress(OS)markers,and complication rates were compared between the two groups.Results:The total treatment efficacy in the painless group was higher than that in the conventional group,and perioperative indicators were superior in the painless group(P<0.05).One week after treatment,the gastrointestinal hormone levels and OS-related markers in the painless group were better than those in the conventional group(P<0.05).The complication rate in the painless group was lower than in the conventional group(P<0.05).Conclusion:High-frequency electrosurgical knife surgery guided by PDE improves the effectiveness of polyp removal in elderly GP patients and accelerates postoperative recovery.It also protects gastrointestinal function,reduces postoperative OS,and ensures higher surgical safety.
基金supported by the National Key R&D Program of China(Grant No.2021YFB3501300)the 9th Research Institute of China Electronics Technology Group Corporation’s open projects(Grant No.2024SK-002-01)the Science and Technology Project of Gansu Province(Grant No.22YF7GA001).
文摘Soft magnetic composites made from metallic magnetic particles with an easy magnetization plane(referred to as easy-plane metallic soft magnetic composites(SMC))are considered ideal materials for the next generation of power electronic devices.This advantage is attributed to their ability to maintain high permeability at elevated frequencies.Despite these advantages,a definitive mathematical model that connects the high-frequency magnetic properties(e.g.,effective permeability)of easy-plane metallic SMCs to the intrinsic properties of the particles is still lacking.In this work,a theoretical calculation model for the effective permeability of easy-plane metallic SMCs was formulated.This model was derived from a skin effect-corrected Landau-Lifshitz-Gilbert(LLG)equation and integrated with effective medium theory incorporating inter-particle interaction.To validate the model,we prepared samples of easy-plane Y_(2)Co_(17)particle/PU SMCs with varying particle sizes and volume fractions.The experimental results showed a strong agreement with the calculated values.This research offers critical theoretical backing for the design and optimization of soft magnetic materials intended for high-frequency applications.
基金supported by the Commercial Aircraft Corporation of China Ltd.(Grant No.COMAC-SFGS-2024–569)Fundamental Research Funds for the Central Universities and Institute of Marine Equipment,Shanghai Rising-Star Program of Science and Technology Commission of Shanghai Municipality(Grant No.23QA1404700)+1 种基金National Natural Science Foundation of China(Grant No.52475384,52505409)China Postdoctoral Science Foundation(Grant No.2024M761963)。
文摘High-frequency pulsed(HFP)gas tungsten arc welding(GTAW)has shown excellent performance in welding of aluminum alloys in recent years,which makes itself a promisingly potential technique for part manufacturing in aviation industry.However,existing researches generally focuses on the effect of a single parameter while lacks multivariable researches.Considering of the fact that gap and misalignment are inevitable in real part clamping,adaptive intelligent welding is usually used during automatic manufacturing,which means under the control of filler wire amount per length of a weld,other parameters including current,welding speed and wire feed speed during one single weld are changing according to the specific clamping situation.Therefore,the influence of specific energy input led by different welding parameters within one adaptive welding program on microstructure and mechanical property of the weld needs to be clarified.This study investigates the effect of welding heat input(ranging from 1048.3 J/mm to 825.6 J/mm within one adaptive welding program control)on the formation quality of 3.25 mm thick 6061 aluminum alloy joints fabricated by HFP-GTAW with 4043 filler wire.According to the obtained results,non-monotonic relationship between heat input and porosity,with an optimal minimum of 4.92%achieved at an intermediate heat input of 856.8 J/mm.The 21.2%decrease of energy input during welding process would reduce the average grain size in the weld center and adjacent to fusion line by 18.6%and 19.4%,respectively.The ratios between fluctuation range to minimum value in average yield and the relative ranges of yield strength and ultimate tensile strength across the tested heat inputs were 14.7%and 12.7%,respectively.The findings provide a general overview on how the microstructure and mechanical properties would fluctuate in an adaptively controlled HFP-GTAW fabricated aluminum alloy weld.
基金National Natural Science Foundation of China, grant number 52177074.
文摘With the evolution of DC distribution networks from traditional radial topologies to more complex multi-branch structures,the number of measurement points supporting synchronous communication remains relatively limited.This poses challenges for conventional fault distance estimation methods,which are often tailored to simple topologies and are thus difficult to apply to large-scale,multi-node DC networks.To address this,a fault distance estimation method based on sparse measurement of high-frequency electrical quantities is proposed in this paper.First,a preliminary fault line identification model based on compressed sensing is constructed to effectively narrow the fault search range and improve localization efficiency.Then,leveraging the high-frequency impedance characteristics and the voltage-current relationship of electrical quantities,a fault distance estimation approach based on high-frequency measurements from both ends of a line is designed.This enables accurate distance estimation even when the measurement devices are not directly placed at both ends of the faulted line,overcoming the dependence on specific sensor placement inherent in traditional methods.Finally,to further enhance accuracy,an optimization model based on minimizing the high-frequency voltage error at the fault point is introduced to reduce estimation error.Simulation results demonstrate that the proposed method achieves a fault distance estimation error of less than 1%under normal conditions,and maintains good performance even under adverse scenarios.
基金financially supported by the National Natural Science Foundation of China(Nos.11774001 and 52202156)the Scientific Research Project of Colleges and Universities in Anhui Province(No.2022AH050113)+2 种基金the University Synergy Innovation Program of Anhui Province(No.GXXT-2022-012)the China Postdoctoral Science Foundation(No.2024M760010)the Postdoctoral Daily Public Start-up Funds of Anhui University(No.S202418001/069).
文摘Moist-electric power generation is an emerging energy technology that collects energy from the environment and converts it into electrical energy through the interaction of moisture with materials.Although most of the moist-electric generators(MEGs)have achieved continuous breakthroughs in open-circuit voltage(V_(OC))and duration at present,it has been proven to be a challenge to maintain a continuous relatively high short-circuit current(ISC).Herein,electrospun nanofiber-based Janus heterogeneous film with both moisture absorption and moisture evaporation characteristics is prepared,and excellent power output performance MEGs have been fabricated by setting perforated electrode at each side respectively.Results have demonstrated the Janus nanofiber moist-electric generator(JFMEG)can generate a V_(OC)of 0.6 V with a continuous power generation time of up to 30 d and a maximum I_(SC)of about 44µA cm^(−2)at 95%relative humidity.In addition,the I_(SC)maintenance time above 10µA cm^(−2)is close to 40 h The integrated device can power commercial equipment and can be used for self-powered breath detection.Additionally,the self-powered field-effect transistor by JFMEG has been fabricated,demonstrating excellent output characteristics.The detailed working mechanism of JFMEG and the influencing factors of power generation performance are systematically analyzed,which can provide reference for the performance improvement of similar moist-electric devices.
基金Supported by the National Basic Research Programme of China under Grant No 2003CB314906, the National Natural Science Foundation of China under Grant No 60577045, and CERG Grant of the Hong Kong Government under Project 9040707.
文摘Dual wavelength high-frequency chaos based on nonlinear effects is generated in an erbium-doped fibre ring laser, where tunable filters （TFs） are used to select the wavelength. A receiving fibre laser with an open-loop structure is constructed with identical parameters as the transmitting fibre laser. By tuning the TFs and the fibre delay line in the receiving fibre laser, chaos synchronization has been observed at anyone the two wavelengths after the chaos is transmitted over 1 km. It is of far reaching importance to construct the high capacity chaos communication system.
基金supported by National Natural Science Foundation of China(52373119,52105296,62161160311)National Key R&D Program of China(2022YFB4701000)Open Fund of Hubei Key Laboratory of Electronic Manufacturing and Packaging Integration(Wuhan University)(EMPI2023020).
文摘Moisture can be utilized as a tremendous source of electricity by emerging moisture-electric generator (MEG). The directional moving of water molecules, which can be driven by gradient of functional groups and water evaporation, is vital for the electricity generation. Here, MEG composed of Graphene Oxide (GO-MEG) with gradient channels is constructed by one-step ice-templating technique, achieving a voltage of 0.48 V and a current of ~ 5.64 µA under humid condition. The gradient channels introduce Laplace pressure difference to the absorbed water droplets and electric potential between two side of the GO-MEG, facilitating the charge flow. Output voltage can be easily enhanced by increasing the structural gradient, reducing the channel size, incorporation of chemical gradient, or scaling up the number of GO-MEG units in series. This work not only provides insight for the working mechanism of GO-MEG with structural gradient, which can be applied to other functional materials, but also establishes a convenient and ecofriendly strategy to construct and finely tune the structural gradient in porous materials.
基金supported by the Project of the National Key Research and Development Program of China under Grant 2022YFB2404100。
文摘The internal hotspot temperature rise prediction in nanocrystalline high-frequency transformers(nanoHFTs) is essential to ensure reliable operation. This paper presents a three-dimensional thermal network(3DTN) model for epoxy resin encapsulated nano HFTs, which aims to precisely predict the temperature distribution inside the transformer in combination with the finite element method(FEM). A magnetothermal bidirectional coupling 3DTN model is established by analyzing the thermal conduction between the core, windings, and epoxy resin, while also considering the convection and radiation heat transfer mechanisms on the surface of the epoxy resin. The model considers the impact of loss distribution in the core and windings on the temperature field and adopts a simplified 1/2 thermal network model to reduce computational complexity. Furthermore, the results of FEM are compared with experimental results to verify the accuracy of the 3DTN model in predicting the temperature rise of nano HFT. The results show that the 3DTN model reduces errors by an average of 5.25% over the traditional two-dimensional thermal network(2DTN) model, particularly for temperature distributions in the windings and core. This paper provides a temperature rise prediction method for the thermal design and offers a theoretical basis and engineering guidance for the optimization of their thermal management systems.
文摘The ocean,as one of Earth’s largest natural resources,covers over 70% of the planet’s surface and holds vast water energy potential.Building on this context,this study designs a hybrid generator(WWR-TENG)that integrates a triboelectric nanogenerator(TENG)and an electromagnetic generator(EMG).TENG is a new technology that can capture mechanical energy from the environment and convert it into electrical energy,and is particularly suitable for common natural or man-made power sources such as human movement,wind power,and water flow.EMG is a device that converts mechanical energy into electrical energy through the principle of electromagnetic induction and can usually provide stable power output.The composite design leverages the complementary advantages of both technologies to efficiently capture and convert marine wave energy.By combining the TENG’s high energy conversion efficiency,lowcost,lightweight structure,and simple designwith the EMG’s capabilities,the systemprovides a sustainable solution for marine energy development.Experimental results demonstrate that at a rotational speed of 3.0 r/s,the TENG component of the WWR-TENG achieves an open-circuit voltage of approximately 280 V and a shortcircuit current of 20μA.At the same time,the EMG unit exhibits an open-circuit voltage of 14 V and a short-circuit current of 14 mA.Furthermore,when integrated with a power management circuit,the WWR-TENG charges a 680μF capacitor to 3 V within 10 s at a rotational speed of 3.0 r/s.A simulated wave environment platform was established,enabling the WWR-TENG to maintain the thermo-hygrometer in normal operation under simulated wave conditions.These findings validate the hybrid system’s effectiveness in harnessing and storingwave energy,highlighting its potential for practical marine energy applications.
