High-temperature mechanical properties of high-boron austenitic steels （HBASs） were studied at 850 ℃ using a dynamic thermal-mechanical simulation testing machine. In addition, the thermal fatigue properties of the...High-temperature mechanical properties of high-boron austenitic steels （HBASs） were studied at 850 ℃ using a dynamic thermal-mechanical simulation testing machine. In addition, the thermal fatigue properties of the alloys were investigated using the self-restraint Uddeholm thermal fatigue test, during which the alloy specimens were cycled between room temperature and 800℃. Stereomicroscopy and scanning electron microscopy were used to study the surface cracks and cross-sectional microstructure of the alloy specimens after the thermal fatigue tests. The effects of carbon content on the mechanical properties at room temperature and high-temperature as well as thermal fatigue properties of the HBASs were also studied. The experimental results show that increasing carbon content induces changes in the microstructure and mechanical properties of the HBASs. The boride phase within the HBAS matrix exhibits a round and smooth morphology, and they are distributed in a discrete manner. The hardness of the alloys increases from 239 （0.19wt.% C） to 302 （0.29wt.% C） and 312 HV （0.37wt.% C）; the tensile yield strength at 850 ℃ increases from 165.1 to 190.3 and 197.1 MPa; and the compressive yield strength increases from 166.1 to 167.9 and 184.4 MPa. The results of the thermal fatigue tests （performed for 300 cycles from room temperature to 800 ℃） indicate that the degree of thermal fatigue of the HBAS with 0.29wt.% C （rating of 2-3） is superior to those of the alloys with 0.19wt.% （rating of 4-5） and 0.37wt.% （rating of 3-4） carbon. The main cause of this difference is the ready precipitation of M23（C,B）6- type borocarbides in the alloys with high carbon content during thermal fatigue testing. The precipitation and aggregation of borocarbide particles at the grain boundaries result in the deterioration of the thermal fatigue properties of the alloys.展开更多
The comprehensive utilization of abundant high-boron iron concentrate is of particular significance to Chi- na, and the high-boron iron concentrate has not yet been utilized as a source for boron at an industrial scal...The comprehensive utilization of abundant high-boron iron concentrate is of particular significance to Chi- na, and the high-boron iron concentrate has not yet been utilized as a source for boron at an industrial scale due to its complex mineralogy and fine mineral dissemination. An innovative method was proposed for recovery of boron and iron from high-boron iron concentrate by reduction roasting and magnetic sepa- ration. The effects of reduction temperature and roasting time were investigated and their optimum condi- tions were determined. The mineralogical changes during roasting were characterized by X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The results showed that the pyrrhotite （FeS） contained in the high-boron iron concentrate and the new-formed FeS-Fe solid solution softened or melted at high temperatures owing to their low melting points, and then decreased the metallic iron ratio and accelerated the growth of metallic iron particles. Meanwhile, the magnetite and szaibelyite were converted into metal- lic iron and suanite, respectively. Consequently, boron was readily enriched into the non-magnetic product and the metallic iron was aggregated to the magnetic concentrate by magnetic separation. Boron recovery of 88.6% with corresponding B2O3 content of 14.5% and iron recovery of 95.1% with an iron grade of 92.7% were achieved when high-boron iron concentrate was reduced at 1 125℃ for 150 min. Besides, the boron reactivity of the boron-rich non-magnetic product was up to 80.8%.展开更多
Boron and carbon contents are the main factors influencing the properties of high-boron steel.In this study,experimental samples with different boron-to-carbon ratios(%B/%C)were prepared.The microstructures of the dif...Boron and carbon contents are the main factors influencing the properties of high-boron steel.In this study,experimental samples with different boron-to-carbon ratios(%B/%C)were prepared.The microstructures of the different samples were observed,and their hardness,bending strength,and impact toughness were investigated.Results show that the main microstructures in the investigated high-boron steel samples are the eutectic Fe_(2)B structure with a fishbone shape and the ternary peritectic Fe_(3)(C,B)structure with a chrysanthemum shape.When the boron content is 2.5wt.%and the carbon content is 0.43wt.%(i.e.,%B/%C=5.82),the overall mechanical properties of the alloy are the best.The alloy's hardness,bending strength and impact toughness reach their maximums,which are 67.3 HRC,1,267.36 MPa and 6.19 J·cm^(-2),respectively.The optimized alloy is compared with conventional materials exhibiting excellent wear resistance(namely,high-manganese steel and high-chromium cast iron)through two-body and three-body abrasion tests.The wear resistance of this high-boron steelinvestigated in this work is found to be superior to those of the more common materials.展开更多
基金supported by the National Natural Science Foundation of China(No.50974080)
文摘High-temperature mechanical properties of high-boron austenitic steels （HBASs） were studied at 850 ℃ using a dynamic thermal-mechanical simulation testing machine. In addition, the thermal fatigue properties of the alloys were investigated using the self-restraint Uddeholm thermal fatigue test, during which the alloy specimens were cycled between room temperature and 800℃. Stereomicroscopy and scanning electron microscopy were used to study the surface cracks and cross-sectional microstructure of the alloy specimens after the thermal fatigue tests. The effects of carbon content on the mechanical properties at room temperature and high-temperature as well as thermal fatigue properties of the HBASs were also studied. The experimental results show that increasing carbon content induces changes in the microstructure and mechanical properties of the HBASs. The boride phase within the HBAS matrix exhibits a round and smooth morphology, and they are distributed in a discrete manner. The hardness of the alloys increases from 239 （0.19wt.% C） to 302 （0.29wt.% C） and 312 HV （0.37wt.% C）; the tensile yield strength at 850 ℃ increases from 165.1 to 190.3 and 197.1 MPa; and the compressive yield strength increases from 166.1 to 167.9 and 184.4 MPa. The results of the thermal fatigue tests （performed for 300 cycles from room temperature to 800 ℃） indicate that the degree of thermal fatigue of the HBAS with 0.29wt.% C （rating of 2-3） is superior to those of the alloys with 0.19wt.% （rating of 4-5） and 0.37wt.% （rating of 3-4） carbon. The main cause of this difference is the ready precipitation of M23（C,B）6- type borocarbides in the alloys with high carbon content during thermal fatigue testing. The precipitation and aggregation of borocarbide particles at the grain boundaries result in the deterioration of the thermal fatigue properties of the alloys.
基金the financial support from the National Natural Science Foundation of China (51134002)the Fundamental Research Funds for the Central Universities of China (N140108001 and N150106003)
文摘The comprehensive utilization of abundant high-boron iron concentrate is of particular significance to Chi- na, and the high-boron iron concentrate has not yet been utilized as a source for boron at an industrial scale due to its complex mineralogy and fine mineral dissemination. An innovative method was proposed for recovery of boron and iron from high-boron iron concentrate by reduction roasting and magnetic sepa- ration. The effects of reduction temperature and roasting time were investigated and their optimum condi- tions were determined. The mineralogical changes during roasting were characterized by X-ray diffraction （XRD） and scanning electron microscopy （SEM）. The results showed that the pyrrhotite （FeS） contained in the high-boron iron concentrate and the new-formed FeS-Fe solid solution softened or melted at high temperatures owing to their low melting points, and then decreased the metallic iron ratio and accelerated the growth of metallic iron particles. Meanwhile, the magnetite and szaibelyite were converted into metal- lic iron and suanite, respectively. Consequently, boron was readily enriched into the non-magnetic product and the metallic iron was aggregated to the magnetic concentrate by magnetic separation. Boron recovery of 88.6% with corresponding B2O3 content of 14.5% and iron recovery of 95.1% with an iron grade of 92.7% were achieved when high-boron iron concentrate was reduced at 1 125℃ for 150 min. Besides, the boron reactivity of the boron-rich non-magnetic product was up to 80.8%.
基金supported by the National Natural Science Foundation of China(Grant No.51965005)the Natural Science Foundation of Guangxi(Grant No.2018GXNSFAA281258)+1 种基金the Guangxi Science and Technology Major Project(Grant Nos.AA17204036-1,AA17202008-1,AA17202001)the open foundation of Guangxi Key Laboratory of Processing for Non-ferrous Metals and Featured Materials,Guangxi University(Grant No.2020GXYSOF12).
文摘Boron and carbon contents are the main factors influencing the properties of high-boron steel.In this study,experimental samples with different boron-to-carbon ratios(%B/%C)were prepared.The microstructures of the different samples were observed,and their hardness,bending strength,and impact toughness were investigated.Results show that the main microstructures in the investigated high-boron steel samples are the eutectic Fe_(2)B structure with a fishbone shape and the ternary peritectic Fe_(3)(C,B)structure with a chrysanthemum shape.When the boron content is 2.5wt.%and the carbon content is 0.43wt.%(i.e.,%B/%C=5.82),the overall mechanical properties of the alloy are the best.The alloy's hardness,bending strength and impact toughness reach their maximums,which are 67.3 HRC,1,267.36 MPa and 6.19 J·cm^(-2),respectively.The optimized alloy is compared with conventional materials exhibiting excellent wear resistance(namely,high-manganese steel and high-chromium cast iron)through two-body and three-body abrasion tests.The wear resistance of this high-boron steelinvestigated in this work is found to be superior to those of the more common materials.
