The power density of electronic components grows continuously,and the subsequent heat accumulation and temperature increase inevitably affect electronic equipment’s stability,reliability and service life.Therefore,ac...The power density of electronic components grows continuously,and the subsequent heat accumulation and temperature increase inevitably affect electronic equipment’s stability,reliability and service life.Therefore,achieving efficient cooling in limited space has become a key problem in updating electronic devices with high performance and high integration.Two-phase immersion is a novel cooling method.The computational fluid dynamics(CFD)method is used to investigate the cooling performance of two-phase immersion cooling on high-power electronics.The two-dimensional CFD model is utilized by the volume of fluid(VOF)method and Reynolds StressModel.Lee’s model was employed to calculate the phase change rate.The heat transfer coefficient along the heatedwalls and the shear-lift force on bubbles are calculated.The simulation data are verified with the literature results.The cooling performance of different coolants has been studied.The results indicate that the boiling heat transfer coefficient can be enhanced by using a low boiling point coolant.The methanol is used as the cooling medium for further research.In addition,the mass flow rate and inlet temperature are investigated to assess the thermal performance of twophase immersion cooling.The average temperature of the high-power electronics is 80℃,and the temperature difference can be constrained to 8℃.Meanwhile,the convective heat transfer coefficient reaches 2740 W/(m^(2)・℃)when the inlet temperature is 50℃,and the mass flow rate is 0.3 kg/s.In conclusion,the results demonstrated that two-phase immersion cooling has provided an effective method for the thermal management of high-power electronics.展开更多
Under certain accident conditions in particle accelerators,high-power beam irradiation may damage vacuum pipes,magnets,and other key equipment.Therefore,machine protection for high-power accelerators is critical to en...Under certain accident conditions in particle accelerators,high-power beam irradiation may damage vacuum pipes,magnets,and other key equipment.Therefore,machine protection for high-power accelerators is critical to ensure safe operation.It is important to study radiation damage to materials to support the design and operation of machine protection systems.In the shock-wave regime,a pronounced hydrodynamic tunneling effect occurs within materials.The traditional one-way coupling simulation method results in substantial errors in this regime.Therefore,a bidirectional iterative coupling simulation method was developed.This method enables the bidirectional coupling of the Monte Carlo code FLUKA and the thermodynamic program Ansys-Autodyn.Density changes are monitored during the simulations,and the updated density is promptly fed back to FLUKA.The program remodels the target with the new density distribution to calculate the new energy deposition distribution,which is then returned to Autodyn for subsequent simulations.This iterative process continues until the entire beam has completed the energy deposition process.Compared to existing methods,this automated method significantly improves the efficiency of the coupled simulations and reduces the possibility of human error.The HRMT-12 beam irradiation experiment at CERN was used for a benchmark study,and simulations were conducted and compared using different equations of state.The results demonstrate the efficiency and accuracy of this simulation method.Compared to complex and costly beam irradiation experiments,this approach is expected to provide fast and cost-effective scientific guidance for the machine protection of high-power accelerators.Considering the severe consequences of the hydrodynamic tunneling effect,machine protection components such as beam collimators,absorbers,and dump blocks should adopt low-density materials to reduce the energy deposition density.Beam dilution may be required in beam dumping systems to avoid target damage.This method can be applied to the redundancy design of such beam dumping systems.展开更多
Flexible polymer electronics have emerged as an important research frontier in materials science due to their unique advantages,including mechanical flexibility,lightweight characteristics,and solution processability....Flexible polymer electronics have emerged as an important research frontier in materials science due to their unique advantages,including mechanical flexibility,lightweight characteristics,and solution processability.These features enable a wide range of emerging applications such as wearable electronics,electronic skins,and biomedical devices,etc.In recent years,much advances in polymer chemistry,device physics,and interface engineering have significantly improved the performance of flexible polymer electronic devices,accelerating their transition from fundamental research to practical applications.展开更多
A rapidly growing field is piezoresistive sensor for accurate respiration rate monitoring to suppress the worldwide respiratory illness.However,a large neglected issue is the sensing durability and accuracy without in...A rapidly growing field is piezoresistive sensor for accurate respiration rate monitoring to suppress the worldwide respiratory illness.However,a large neglected issue is the sensing durability and accuracy without interference since the expiratory pressure always coupled with external humidity and temperature variations,as well as mechanical motion artifacts.Herein,a robust and biodegradable piezoresistive sensor is reported that consists of heterogeneous MXene/cellulose-gelation sensing layer and Ag-based interdigital electrode,featuring customizable cylindrical interface arrangement and compact hierarchical laminated architecture for collectively regulating the piezoresistive response and mechanical robustness,thereby realizing the long-term breath-induced pressure detection.Notably,molecular dynamics simulations reveal the frequent angle inversion and reorientation of MXene/cellulose in vacuum filtration,driven by shear forces and interfacial interactions,which facilitate the establishment of hydrogen bonds and optimize the architecture design in sensing layer.The resultant sensor delivers unprecedented collection features of superior stability for off-axis deformation(0-120°,~2.8×10^(-3) A)and sensing accuracy without crosstalk(humidity 50%-100%and temperature 30-80).Besides,the sensor-embedded mask together with machine learning models is achieved to train and classify the respiration status for volunteers with different ages(average prediction accuracy~90%).It is envisioned that the customizable architecture design and sensor paradigm will shed light on the advanced stability of sustainable electronics and pave the way for the commercial application in respiratory monitory.展开更多
Traditional digitizers for signal readout of PET detectors are based on commercial analog-to-digital converters(ADC).However,the cost and power consumption of an entire electronic readout system based on digitizers fo...Traditional digitizers for signal readout of PET detectors are based on commercial analog-to-digital converters(ADC).However,the cost and power consumption of an entire electronic readout system based on digitizers for a PET scanner are high.To address this problem,a soft-core ADC based on a field-programmable gate array(FPGA)was proposed.An FPGA-based ADC(FPGA-ADC)combines low loss and high performance.To achieve good performance,the FPGA-ADC requires three calibrations:time-to-digital converter(TDC)length calibration,TDC alignment calibration,and TDC-to-ADC calibration.A prototype front-end electronics based on FPGA-ADC was built to evaluate the performance of time-of-flight positron emission tomography(TOF PET)detectors.Each PET detector consists of a LYSO crystal single-ended coupled to a silicon photomultiplier(SiPM).The experimental results show that the full-width at half-maximum(FWHM)energy resolution for 511 keV gamma photons after saturation correction of the SiPM was 12.3%.The FWHM coincidence timing resolution(CTR)of the TOF PET detector with the readout of the front-end electronic prototype is 385.2 ps.FPGA-ADCbased front-end electronics are very promising for multichannel,low-cost,highly integrated,and power-efficient readout electronic systems for radiation detector applications.展开更多
Continuous monitoring of biosignals is essential for advancing early disease detection,personalized treatment,and health management.Flexible electronics,capable of accurately monitoring biosignals in daily life,have g...Continuous monitoring of biosignals is essential for advancing early disease detection,personalized treatment,and health management.Flexible electronics,capable of accurately monitoring biosignals in daily life,have garnered considerable attention due to their softness,conformability,and biocompatibility.However,several challenges remain,including imperfect skin-device interfaces,limited breathability,and insufficient mechanoelectrical stability.On-skin epidermal electronics,distinguished by their excellent conformability,breathability,and mechanoelectrical robustness,offer a promising solution for high-fidelity,long-term health monitoring.These devices can seamlessly integrate with the human body,leading to transformative advancements in future personalized healthcare.This review provides a systematic examination of recent advancements in on-skin epidermal electronics,with particular emphasis on critical aspects including material science,structural design,desired properties,and practical applications.We explore various materials,considering their properties and the corresponding structural designs developed to construct high-performance epidermal electronics.We then discuss different approaches for achieving the desired device properties necessary for long-term health monitoring,including adhesiveness,breathability,and mechanoelectrical stability.Additionally,we summarize the diverse applications of these devices in monitoring biophysical and physiological signals.Finally,we address the challenges facing these devices and outline future prospects,offering insights into the ongoing development of on-skin epidermal electronics for long-term health monitoring.展开更多
Conductive elastomers combining micromechanical sensitivity,lightweight adaptability,and environmental sustainability are critically needed for advanced flexible electronics requiring precise responsiveness and long-t...Conductive elastomers combining micromechanical sensitivity,lightweight adaptability,and environmental sustainability are critically needed for advanced flexible electronics requiring precise responsiveness and long-term wearability;however,the integration of these properties remains a significant challenge.Here,we present a biomass-derived conductive elastomer featuring a rationally engineered dynamic crosslinked network integrated with a tunable microporous architecture.This structural design imparts pronounced micromechanical sensitivity,an ultralow density(~0.25 g cm^(−3)),and superior mechanical compliance for adaptive deformation.Moreover,the unique micro-spring effect derived from the porous architecture ensures exceptional stretchability(>500%elongation at break)and superior resilience,delivering immediate and stable electrical response under both subtle(<1%)and large(>200%)mechanical stimuli.Intrinsic dynamic interactions endow the elastomer with efficient room temperature self-healing and complete recyclability without compromising performance.First-principles simulations clarify the mechanisms behind micropore formation and the resulting functionality.Beyond its facile and mild fabrication process,this work establishes a scalable route toward high-performance,sustainable conductive elastomers tailored for next-generation soft electronics.展开更多
Textile electronics with extraordinary sensing capabilities holds significant potential in the Artificial Intelligence of Things(AIoT).However,little effort is paid to their mutual advantages of robust interfacial int...Textile electronics with extraordinary sensing capabilities holds significant potential in the Artificial Intelligence of Things(AIoT).However,little effort is paid to their mutual advantages of robust interfacial interactions,ultra-strong mechanical performance,and stability.Herein,we fabricate homogeneous and multifunctional core-shell macrofibers by integrating bridge-functionalized MXene/PEDOT:PSS conductive ink with aligned bacterial cellulose(BC).These resulting macrofibers feature mechanical properties(tensile strength of 433.2 MPa and the Young's modulus of 25.9 GPa),exceptional electrical conductivity(10.05 S cm^(-1))and durable hydrophobicity.Such superior robustness allows for the fabrication of the macrofibers woven into textile-based triboelectric nanogenerator(PKT-TENG)and shows an impressive high-performance of a maximum open-circuit voltage of 272.54 V,short-circuit current of 14.56μA and power density of 86.29 mW m^(-2),which successfully powers commercial electronics.As the proof-of-concept illustration,the macrofibers with durable hydrophobicity and high piezoresistive sensitivity are further employed for precepting diverse liquids that can simultaneously monitor their distinctive motion features via real-time resistance variation on the textile-based array.This work is expected to offer new insights into the design of advanced fibers with ultra-strong mechanical capabilities and high conductivity and provide an avenue for the development of textile electronics for high-performance sensing and intelligent manufacturing.展开更多
Multimodal spatiotemporal data from smart city consumer electronics present critical challenges including cross-modal temporal misalignment,unreliable data quality,limited joint modeling of spatial and temporal depend...Multimodal spatiotemporal data from smart city consumer electronics present critical challenges including cross-modal temporal misalignment,unreliable data quality,limited joint modeling of spatial and temporal dependencies,and weak resilience to adversarial updates.To address these limitations,EdgeST-Fusion is introduced as a cross-modal federated graph transformer framework for context-aware smart city analytics.The architecture integrates cross-modal embedding networks for modality alignment,graph transformer encoders for spatial dependency modeling,temporal self-attention for dynamic pattern learning,and adaptive anomaly detection to ensure data quality and security during aggregation.A privacy-preserving federated learning protocol with differential privacy guarantees enables collaborative model training without centralizing sensitive data.The framework employs data-quality-aware weighted aggregation to enhance robustness against noisy and malicious client updates.Experimental evaluation on the GeoLife,PeMS-Bay,and SmartHome+datasets demonstrates that EdgeST-Fusion achieves 21.8%improvement in prediction accuracy,35.7%reduction in communication overhead,and 29.4%enhancement in security resilience compared to recent baselines.Real-world deployment across three smart city testbeds validates practical viability with 90.0%average accuracy and sub-250 ms inference latency.The proposed framework remains feasible for deployment on heterogeneous and resource-constrained consumer electronics devices whilemaintaining strong privacy guarantees and scalability for large-scale urban environments.展开更多
The Na_(4)Fe_(3)(PO_(4))_(2)P_(2)O_(7)(NFPP)has considered as a very attractive cathode material for Na-ion batteries mainly due to its cheap price and high security.Its low electron transfer rate is usually improved ...The Na_(4)Fe_(3)(PO_(4))_(2)P_(2)O_(7)(NFPP)has considered as a very attractive cathode material for Na-ion batteries mainly due to its cheap price and high security.Its low electron transfer rate is usually improved by coating a layer of hard carbon,which however exhibits a low graphitization degree because of the relatively low NFPP synthesis temperature(~500℃).In this study,a highly-conductive hybrid carbon has been employed to accelerate redox reaction kinetics of NFPP by modulating electronic structure for achieving high-power Na-ion batteries.The hybrid carbon is derived from the mixed polyethylene glycol(PEG)and glucose,in which the low ether bond energy(~340 kJ mol^(-1))of PEG facilitates the free radical generation during pyrolysis with high graphitization degree while glucose improves the uniformity of the c arbon coating.As a result,the optimized cathode exhibits a very high reversible capacity of 90.8 mAh g^(-1)at 20C within 2.0-4.0 V with 85.3%capacity retention after 10,000 cycles,highlighting huge application potentials in two-wheeled electric vehicles,backup energy storage,and so forth.展开更多
Wide bandgap semiconductor materials are driving revolutionary improvements in the performance of high-power electronic devices. This study systematically evaluates the application prospects of wide bandgap semiconduc...Wide bandgap semiconductor materials are driving revolutionary improvements in the performance of high-power electronic devices. This study systematically evaluates the application prospects of wide bandgap semiconductor materials in high-power electronic devices. The research first compares the physical properties of major wide bandgap materials (such as silicon carbide SiC and gallium nitride GaN), analyzing their advantages over traditional silicon materials. Through theoretical calculations and experimental data analysis, the study assesses the performance of these materials in terms of high breakdown field, high thermal conductivity, and high electron saturation velocity. The research focuses on the application of SiC and GaN devices in power electronics, including high-voltage DC transmission, electric vehicle drive systems, and renewable energy conversion. The study also discusses the potential of wide bandgap materials in RF and microwave applications. However, the research also points out the challenges faced by wide bandgap semiconductor technology, such as material defect control, device reliability, and cost issues. To address these challenges, the study proposes solutions, including improving epitaxial growth techniques, optimizing device structure design, and developing new packaging methods. Finally, the research looks ahead to the prospects of wide bandgap semiconductors in emerging application areas such as quantum computing and terahertz communications. This study provides a comprehensive theoretical foundation and technology roadmap for the application of wide bandgap semiconductor materials in high-power electronic devices, contributing to the development of next-generation high-efficiency energy conversion and management systems.展开更多
The types of dopants lead to distinctive microstructural evolution behavior and physical properties in materials.In this study,the effect of stoichiometric and non-stoichiometric Mn modification,namely Pb(Mn_(1/3) Nb_...The types of dopants lead to distinctive microstructural evolution behavior and physical properties in materials.In this study,the effect of stoichiometric and non-stoichiometric Mn modification,namely Pb(Mn_(1/3) Nb_(2/3))O_(3)(PMnN)and MnO_(2),on the microstructure and properties of Pb(Yb_(1/2) Nb_(1/2))O_(3)-PbZrO_(3)-PbTiO_(3)(PYN-PZT)piezoelectric ceramics are systematically investigated.It was found that stoichiometric PMnN modification inhibits the grain growth while non-stoichiometric MnO_(2) modification promotes it,and thus the former yields stronger high-power characteristics(higher internal bias field Ei and larger mechanical quality factor Q_(m))than the latter.Specifically,with an equivalent amount of Mn modifica-tion(2 mol%),PMnN and MnO_(2) modification PYN-PZT ceramics exhibit significantly different values for average grain size(1.21μm vs.14.12μm),Ei(8.5 kV/cm vs.5 kV/cm),and Qm(2376 vs.1134).To further evaluate high-power performance,the vibration velocity v of these two modified PYN-PZT under high driving conditions was measured.Under an AC electric field of 3.5 V/mm,the PYN-PZT+6PMnN ceram-ics exhibit a v of up to 0.95 m s^(−1),larger than both MnO2-doped PYN-PZT(0.72 m s^(−1))and unmodified PYN-PZT ceramics(0.1 m s^(−1)),and far outperformance than both PZT-4 and PZT-8 ceramics.Furthermore,to elucidate the origin of the exceptional high-power performance of PMnN-modified PYN-PZT,we per-formed phase-field simulations revealing a pinning effect of the grain boundary on domain wall motion.Consequently,the small grain size(high grain boundary density)in PMnN-modified PYN-PZT exhibits a strong pinning effect,resulting in a large Q_(m) and outstanding high-power performance.展开更多
One of the important effects of the ionospheric modification by high-power waves is the airglow enhancement. Both the thermal electrons and the dissociation recombination contribute to generate the airglow emissions d...One of the important effects of the ionospheric modification by high-power waves is the airglow enhancement. Both the thermal electrons and the dissociation recombination contribute to generate the airglow emissions during HF heating. However, the relative importance of the airglow emission induced by dissociative recombination and thermal electrons has been rarely investigated. In this study, we carry out a simulation study on the airglow produced by high-power HF heating at nighttime associated with dissociative recombination and thermal electrons. SAMI2(Sami2 is Another Model of the Ionosphere) is employed to simulate the ionospheric variations during the HF heating. The main conclusions from this study are as follows:(1) For the airglow induced by dissociative recombination, both 630.0 nm and 557.7 nm emissions show a decrease at the heating wave reflection height during the heating period,while when the heating is turned off, an increase is shown at lower altitudes. The reduction of airglow during the heating is caused by the rapid increase of electron temperature and the diffusion of plasmas dominates the after-heating airglow enhancement.(2) 630.0 nm emission due to thermal electrons is greatly enhanced at the wave reflection height, indicating that thermal electrons play a major role in exciting 630.0 nm emission. For the 557.7 nm emission, the excitation threshold(4.17 e V) is too high for thermal electrons.(3) The combined effect of dissociative recombination and thermal electrons could be the possible reason for the observed X-mode(extraordinary mode) suppression of 630.0 nm airglow during O-mode(ordinary mode) enhancement.展开更多
Lead magnesium niobate-lead titanate(PMN-PT)piezoelectric single crystals are widely utilized due to their outstanding performance,with varying compositions significantly impacting their properties.While application o...Lead magnesium niobate-lead titanate(PMN-PT)piezoelectric single crystals are widely utilized due to their outstanding performance,with varying compositions significantly impacting their properties.While application of PMN-PT in high-power settings is rapidly evolving,material parameters are typically tested under low signal conditions(1 V),and effects of different PT(PbTiO_(3))contents on the performance of PMN-PT single crystals under high-power conditions remain unclear.This study developed a comprehensive high-power testing platform using the constant voltage method to evaluate performance of PMN-PT single crystals with different PT contents under high-power voltage stimulation.Using crystals sized at 10 mm×3 mm×0.5 mm as an example,this research explored changes in material parameters.The results exhibit that while trend of the parameter changes under high-power excitation was consistent across different PT contents,degree of the change varied significantly.For instance,a PMN-PT single crystal with 26%(in mol)PT content exhibited a 25%increase in the piezoelectric coefficient d_(31),a 13%increase in the elastic compliance coefficient s_(11)^(E),a 17%increase in the electromechanical coupling coefficient k_(31),and a 73%decrease in the mechanical quality factor Q_(m) when the power reached 7.90 W.As the PT content increased,the PMN-PT materials became more susceptible to temperature influences,significantly reducing the power tolerance and more readily reaching the depolarization temperatures.This led to loss of piezoelectric performance.Based on these findings,a clearer understanding of impact of PT content on performance of PMN-PT single crystals under high-power applications has been established,providing reliable data to support design of sensors or transducers using PMN-PT as the sensitive element.展开更多
High-power laser technology is widely used in manufacturing processing,medical diagnosis,and treatment,and is one of the important fields of strategic high-tech competition in China at the moment.In the context of ind...High-power laser technology is widely used in manufacturing processing,medical diagnosis,and treatment,and is one of the important fields of strategic high-tech competition in China at the moment.In the context of industrial upgrading,high-power laser technology plays an important role in leading the development of the manufacturing industry and industrial intelligence.Based on this,this paper carries out research on high-power laser technology and industry,summarizes the basic principle and classification of high-power laser technology,analyzes the current status of high-power laser technology industry,points out the opportunities and challenges faced by the industry development,puts forward suggestions to promote the development of high-power laser technology industry,and to provide an effective reference for the application and development of high-power laser technology.展开更多
The rapid advancement of modern electronics has led to a surge in solid electronic waste,which poses significant environmental and health challenges.This review focuses on recent developments in paper-based electronic...The rapid advancement of modern electronics has led to a surge in solid electronic waste,which poses significant environmental and health challenges.This review focuses on recent developments in paper-based electronic devices fabricated through low-cost,hand-printing techniques,with particular emphasis on their applications in energy harvesting,storage,and sensing.Unlike conventional plastic-based substrates,cellulose paper offers several advantages,including biodegradability,recyclability,and low fabrication cost.By integrating functional nanomaterials such as two-dimensional chalcogenides,metal oxides,conductive polymers,and carbon-based structures onto paper,researchers have achieved high-performance devices such as broadband photodetectors(responsivity up to 52 mA/W),supercapacitors(energy density~15.1 mWh/cm^(2)),and pressure sensors(sensitivity~18.42 kPa^(-1)).The hand-printing approach,which eliminates the need for sophisticated equipment and toxic solvents,offers a promising route for scalable,sustainable,and disposable electronics.This review outlines fabrication methods and key performance metrics,and discusses the current challenges and future directions for realizing robust,flexible devices aligned with green technology and the United Nation’s Sustainable Development Goals.展开更多
Skin-integrated wearable electronics enable continuous,medical-grade monitoring and therapy in daily life,but must balance conflicting needs related to mechanics,power,and communication.This review uses a dual-interfa...Skin-integrated wearable electronics enable continuous,medical-grade monitoring and therapy in daily life,but must balance conflicting needs related to mechanics,power,and communication.This review uses a dual-interface approach that separates the sensor-receiver interface,which handles wireless data and energy transfer,from the sensor-skin interface,where physiological signals are converted and mechanical and biological integration occur.We first reviewed wireless connections designed for skin electronics,focusing on Bluetooth Low Energy(BLE),Radio Frequency Identification(RFID)/Near-Field Communication(NFC)systems,and hybrid systems.Next,we examine sensor-skin interfaces ranging from mediated contact layers such as hydrogels for wearable ultrasound and soft conductive electrodes,to skin-conformal direct-contact methods based on structural mechanics,and ultrathin epidermal devices.Finally,we discuss cross-interface coupling,emphasizing how antenna layouts,power budgets,and body-induced RF effects limit mechanical design,and how skin mechanics influence link reliability.We conclude by exploring opportunities in battery-free and energy-autonomous systems,body-coupled communication,and integration with artificial intelligence(AI)-enabled digital health,positioning future electronic skins as soft,networked platforms that are comfortable and reliable.展开更多
The growing demand for efficient high-power switching power supplies has spurred interest in advanced topologies.The three-phase VIENNA converter stands out for its high power factor,simplified structure,and robust pe...The growing demand for efficient high-power switching power supplies has spurred interest in advanced topologies.The three-phase VIENNA converter stands out for its high power factor,simplified structure,and robust performance.Current research focuses on its operational principles,control strategies,and behavior under various load conditions.Key considerations include component selection,thermal management,and EMI/EMC optimization.This topology finds applications across renewable energy systems,industrial equipment,telecommunications,and electric vehicle charging infrastructures.Comparative analyses with alternative topologies and cost-benefit evaluations are also addressed.Future developments are expected to emphasize the integration of wide-bandgap devices and advancements in digital control techniques to further enhance efficiency and system performance.展开更多
This special issue will include reviews,regular papers,and short communications,and reports in the fields for next generation electronics and photonics.The topics include but not restricted in advanced microelectronic...This special issue will include reviews,regular papers,and short communications,and reports in the fields for next generation electronics and photonics.The topics include but not restricted in advanced microelectronic devices and materials,low-dimensional materials and novel nanodevice applications,flexible/wearable/implantable electronics,wide bandgap semiconductor materials and devices,photoelectronics,photonics,advanced display technologies,nanophotonics,integrated quantum photonics,photovoltaics,energy harvesting and self-powered wireless sensing,sensors,micro-actuators,MEMS,microfluidics,and bioMEMS,etc.展开更多
基金support from the Key Laboratory of Multiphase Flow Reaction and Separation Engineering of Shandong Province,China(Grant No.2021MFRSE-C01)the Natural Science Foundation of Gansu Province,China(No.22JR5RA269)Fujian Province Science Foundation for Youths,China(No.2020305069).
文摘The power density of electronic components grows continuously,and the subsequent heat accumulation and temperature increase inevitably affect electronic equipment’s stability,reliability and service life.Therefore,achieving efficient cooling in limited space has become a key problem in updating electronic devices with high performance and high integration.Two-phase immersion is a novel cooling method.The computational fluid dynamics(CFD)method is used to investigate the cooling performance of two-phase immersion cooling on high-power electronics.The two-dimensional CFD model is utilized by the volume of fluid(VOF)method and Reynolds StressModel.Lee’s model was employed to calculate the phase change rate.The heat transfer coefficient along the heatedwalls and the shear-lift force on bubbles are calculated.The simulation data are verified with the literature results.The cooling performance of different coolants has been studied.The results indicate that the boiling heat transfer coefficient can be enhanced by using a low boiling point coolant.The methanol is used as the cooling medium for further research.In addition,the mass flow rate and inlet temperature are investigated to assess the thermal performance of twophase immersion cooling.The average temperature of the high-power electronics is 80℃,and the temperature difference can be constrained to 8℃.Meanwhile,the convective heat transfer coefficient reaches 2740 W/(m^(2)・℃)when the inlet temperature is 50℃,and the mass flow rate is 0.3 kg/s.In conclusion,the results demonstrated that two-phase immersion cooling has provided an effective method for the thermal management of high-power electronics.
基金supported by the National Natural Science Foundation of China(No.12275196)。
文摘Under certain accident conditions in particle accelerators,high-power beam irradiation may damage vacuum pipes,magnets,and other key equipment.Therefore,machine protection for high-power accelerators is critical to ensure safe operation.It is important to study radiation damage to materials to support the design and operation of machine protection systems.In the shock-wave regime,a pronounced hydrodynamic tunneling effect occurs within materials.The traditional one-way coupling simulation method results in substantial errors in this regime.Therefore,a bidirectional iterative coupling simulation method was developed.This method enables the bidirectional coupling of the Monte Carlo code FLUKA and the thermodynamic program Ansys-Autodyn.Density changes are monitored during the simulations,and the updated density is promptly fed back to FLUKA.The program remodels the target with the new density distribution to calculate the new energy deposition distribution,which is then returned to Autodyn for subsequent simulations.This iterative process continues until the entire beam has completed the energy deposition process.Compared to existing methods,this automated method significantly improves the efficiency of the coupled simulations and reduces the possibility of human error.The HRMT-12 beam irradiation experiment at CERN was used for a benchmark study,and simulations were conducted and compared using different equations of state.The results demonstrate the efficiency and accuracy of this simulation method.Compared to complex and costly beam irradiation experiments,this approach is expected to provide fast and cost-effective scientific guidance for the machine protection of high-power accelerators.Considering the severe consequences of the hydrodynamic tunneling effect,machine protection components such as beam collimators,absorbers,and dump blocks should adopt low-density materials to reduce the energy deposition density.Beam dilution may be required in beam dumping systems to avoid target damage.This method can be applied to the redundancy design of such beam dumping systems.
文摘Flexible polymer electronics have emerged as an important research frontier in materials science due to their unique advantages,including mechanical flexibility,lightweight characteristics,and solution processability.These features enable a wide range of emerging applications such as wearable electronics,electronic skins,and biomedical devices,etc.In recent years,much advances in polymer chemistry,device physics,and interface engineering have significantly improved the performance of flexible polymer electronic devices,accelerating their transition from fundamental research to practical applications.
基金supported by the National Natural Science Foundation of China(22074072,22274083,52376199)the Shandong Provincial Natural Science Foundation(ZR2023LZY005)+1 种基金the Exploration Project of the State Key Laboratory of BioFibers and EcoTextiles of Qingdao University(TSKT202101)the Fundamental Research Funds for the Central Universities(2022BLRD13,2023BLRD01).
文摘A rapidly growing field is piezoresistive sensor for accurate respiration rate monitoring to suppress the worldwide respiratory illness.However,a large neglected issue is the sensing durability and accuracy without interference since the expiratory pressure always coupled with external humidity and temperature variations,as well as mechanical motion artifacts.Herein,a robust and biodegradable piezoresistive sensor is reported that consists of heterogeneous MXene/cellulose-gelation sensing layer and Ag-based interdigital electrode,featuring customizable cylindrical interface arrangement and compact hierarchical laminated architecture for collectively regulating the piezoresistive response and mechanical robustness,thereby realizing the long-term breath-induced pressure detection.Notably,molecular dynamics simulations reveal the frequent angle inversion and reorientation of MXene/cellulose in vacuum filtration,driven by shear forces and interfacial interactions,which facilitate the establishment of hydrogen bonds and optimize the architecture design in sensing layer.The resultant sensor delivers unprecedented collection features of superior stability for off-axis deformation(0-120°,~2.8×10^(-3) A)and sensing accuracy without crosstalk(humidity 50%-100%and temperature 30-80).Besides,the sensor-embedded mask together with machine learning models is achieved to train and classify the respiration status for volunteers with different ages(average prediction accuracy~90%).It is envisioned that the customizable architecture design and sensor paradigm will shed light on the advanced stability of sustainable electronics and pave the way for the commercial application in respiratory monitory.
基金supported by the Key R&D Program of Shandong Province(No.2023SFGC0101)Shandong Excellent Young Scientists Fund Program(Overseas)(No.2023HWYQ-047)+1 种基金the Natural Science Foundation of Shandong Province(No.ZR2022QA039)the National Natural Science Foundation of China(NSFC)(No.U2106202).
文摘Traditional digitizers for signal readout of PET detectors are based on commercial analog-to-digital converters(ADC).However,the cost and power consumption of an entire electronic readout system based on digitizers for a PET scanner are high.To address this problem,a soft-core ADC based on a field-programmable gate array(FPGA)was proposed.An FPGA-based ADC(FPGA-ADC)combines low loss and high performance.To achieve good performance,the FPGA-ADC requires three calibrations:time-to-digital converter(TDC)length calibration,TDC alignment calibration,and TDC-to-ADC calibration.A prototype front-end electronics based on FPGA-ADC was built to evaluate the performance of time-of-flight positron emission tomography(TOF PET)detectors.Each PET detector consists of a LYSO crystal single-ended coupled to a silicon photomultiplier(SiPM).The experimental results show that the full-width at half-maximum(FWHM)energy resolution for 511 keV gamma photons after saturation correction of the SiPM was 12.3%.The FWHM coincidence timing resolution(CTR)of the TOF PET detector with the readout of the front-end electronic prototype is 385.2 ps.FPGA-ADCbased front-end electronics are very promising for multichannel,low-cost,highly integrated,and power-efficient readout electronic systems for radiation detector applications.
基金supported by National Natural Science Foundation of China(Grant Nos.52025055,52375576,52350349)Key Research and Development Program of Shaanxi(Program No.2022GXLH-01-12)+2 种基金Joint Fund of Ministry of Education for Equipment Pre-research(No.8091B03012304)Aeronautical Science Foundation of China(No.2022004607001)the Fundamental Research Funds for the Central Universities(No.xtr072024031).
文摘Continuous monitoring of biosignals is essential for advancing early disease detection,personalized treatment,and health management.Flexible electronics,capable of accurately monitoring biosignals in daily life,have garnered considerable attention due to their softness,conformability,and biocompatibility.However,several challenges remain,including imperfect skin-device interfaces,limited breathability,and insufficient mechanoelectrical stability.On-skin epidermal electronics,distinguished by their excellent conformability,breathability,and mechanoelectrical robustness,offer a promising solution for high-fidelity,long-term health monitoring.These devices can seamlessly integrate with the human body,leading to transformative advancements in future personalized healthcare.This review provides a systematic examination of recent advancements in on-skin epidermal electronics,with particular emphasis on critical aspects including material science,structural design,desired properties,and practical applications.We explore various materials,considering their properties and the corresponding structural designs developed to construct high-performance epidermal electronics.We then discuss different approaches for achieving the desired device properties necessary for long-term health monitoring,including adhesiveness,breathability,and mechanoelectrical stability.Additionally,we summarize the diverse applications of these devices in monitoring biophysical and physiological signals.Finally,we address the challenges facing these devices and outline future prospects,offering insights into the ongoing development of on-skin epidermal electronics for long-term health monitoring.
基金supported by National Natural Science Foundation of China(No.52103044)Double First-Class Initiative University of Science and Technology of China(KY2400000037)the Young Talent Programme(GG2400007009).
文摘Conductive elastomers combining micromechanical sensitivity,lightweight adaptability,and environmental sustainability are critically needed for advanced flexible electronics requiring precise responsiveness and long-term wearability;however,the integration of these properties remains a significant challenge.Here,we present a biomass-derived conductive elastomer featuring a rationally engineered dynamic crosslinked network integrated with a tunable microporous architecture.This structural design imparts pronounced micromechanical sensitivity,an ultralow density(~0.25 g cm^(−3)),and superior mechanical compliance for adaptive deformation.Moreover,the unique micro-spring effect derived from the porous architecture ensures exceptional stretchability(>500%elongation at break)and superior resilience,delivering immediate and stable electrical response under both subtle(<1%)and large(>200%)mechanical stimuli.Intrinsic dynamic interactions endow the elastomer with efficient room temperature self-healing and complete recyclability without compromising performance.First-principles simulations clarify the mechanisms behind micropore formation and the resulting functionality.Beyond its facile and mild fabrication process,this work establishes a scalable route toward high-performance,sustainable conductive elastomers tailored for next-generation soft electronics.
基金financially supported by the National Natural Science Foundation of China(52473178,52473275)Young Elite Scientists Sponsorship Program by CAST(2022QNRC001)+8 种基金the Program of Introducing Talents of Jiangnan University(1065219032210150)the Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX23_2474)the Science and Technology Program of Jiangsu Administration for Market Regulation(KJ2024013)the Wuxi Science and Technology Development Fund Project(K20231042)Funded by Basic Research Program of Jiangsu(BK20251613)the Fundamental Research Funds for the Central Universities(JUSRP202504025)Jiangnan University Student Innovation Program(2025CXZ066)Laboratory of Flexible Electronics Technology,Tsinghua Universitythe Wuxi Taihu Talent Innovation Project(2024)。
文摘Textile electronics with extraordinary sensing capabilities holds significant potential in the Artificial Intelligence of Things(AIoT).However,little effort is paid to their mutual advantages of robust interfacial interactions,ultra-strong mechanical performance,and stability.Herein,we fabricate homogeneous and multifunctional core-shell macrofibers by integrating bridge-functionalized MXene/PEDOT:PSS conductive ink with aligned bacterial cellulose(BC).These resulting macrofibers feature mechanical properties(tensile strength of 433.2 MPa and the Young's modulus of 25.9 GPa),exceptional electrical conductivity(10.05 S cm^(-1))and durable hydrophobicity.Such superior robustness allows for the fabrication of the macrofibers woven into textile-based triboelectric nanogenerator(PKT-TENG)and shows an impressive high-performance of a maximum open-circuit voltage of 272.54 V,short-circuit current of 14.56μA and power density of 86.29 mW m^(-2),which successfully powers commercial electronics.As the proof-of-concept illustration,the macrofibers with durable hydrophobicity and high piezoresistive sensitivity are further employed for precepting diverse liquids that can simultaneously monitor their distinctive motion features via real-time resistance variation on the textile-based array.This work is expected to offer new insights into the design of advanced fibers with ultra-strong mechanical capabilities and high conductivity and provide an avenue for the development of textile electronics for high-performance sensing and intelligent manufacturing.
基金supported by the University of Tabuk,Saudi Arabia。
文摘Multimodal spatiotemporal data from smart city consumer electronics present critical challenges including cross-modal temporal misalignment,unreliable data quality,limited joint modeling of spatial and temporal dependencies,and weak resilience to adversarial updates.To address these limitations,EdgeST-Fusion is introduced as a cross-modal federated graph transformer framework for context-aware smart city analytics.The architecture integrates cross-modal embedding networks for modality alignment,graph transformer encoders for spatial dependency modeling,temporal self-attention for dynamic pattern learning,and adaptive anomaly detection to ensure data quality and security during aggregation.A privacy-preserving federated learning protocol with differential privacy guarantees enables collaborative model training without centralizing sensitive data.The framework employs data-quality-aware weighted aggregation to enhance robustness against noisy and malicious client updates.Experimental evaluation on the GeoLife,PeMS-Bay,and SmartHome+datasets demonstrates that EdgeST-Fusion achieves 21.8%improvement in prediction accuracy,35.7%reduction in communication overhead,and 29.4%enhancement in security resilience compared to recent baselines.Real-world deployment across three smart city testbeds validates practical viability with 90.0%average accuracy and sub-250 ms inference latency.The proposed framework remains feasible for deployment on heterogeneous and resource-constrained consumer electronics devices whilemaintaining strong privacy guarantees and scalability for large-scale urban environments.
基金financially supported by the National Natural Science Foundation of China(Nos.U22A20429 and 22308103)the Program for Shanghai Pilot Program for Basic Research(No.22TQ1400100-13)the Fundamental Research Funds for the Central Universities
文摘The Na_(4)Fe_(3)(PO_(4))_(2)P_(2)O_(7)(NFPP)has considered as a very attractive cathode material for Na-ion batteries mainly due to its cheap price and high security.Its low electron transfer rate is usually improved by coating a layer of hard carbon,which however exhibits a low graphitization degree because of the relatively low NFPP synthesis temperature(~500℃).In this study,a highly-conductive hybrid carbon has been employed to accelerate redox reaction kinetics of NFPP by modulating electronic structure for achieving high-power Na-ion batteries.The hybrid carbon is derived from the mixed polyethylene glycol(PEG)and glucose,in which the low ether bond energy(~340 kJ mol^(-1))of PEG facilitates the free radical generation during pyrolysis with high graphitization degree while glucose improves the uniformity of the c arbon coating.As a result,the optimized cathode exhibits a very high reversible capacity of 90.8 mAh g^(-1)at 20C within 2.0-4.0 V with 85.3%capacity retention after 10,000 cycles,highlighting huge application potentials in two-wheeled electric vehicles,backup energy storage,and so forth.
文摘Wide bandgap semiconductor materials are driving revolutionary improvements in the performance of high-power electronic devices. This study systematically evaluates the application prospects of wide bandgap semiconductor materials in high-power electronic devices. The research first compares the physical properties of major wide bandgap materials (such as silicon carbide SiC and gallium nitride GaN), analyzing their advantages over traditional silicon materials. Through theoretical calculations and experimental data analysis, the study assesses the performance of these materials in terms of high breakdown field, high thermal conductivity, and high electron saturation velocity. The research focuses on the application of SiC and GaN devices in power electronics, including high-voltage DC transmission, electric vehicle drive systems, and renewable energy conversion. The study also discusses the potential of wide bandgap materials in RF and microwave applications. However, the research also points out the challenges faced by wide bandgap semiconductor technology, such as material defect control, device reliability, and cost issues. To address these challenges, the study proposes solutions, including improving epitaxial growth techniques, optimizing device structure design, and developing new packaging methods. Finally, the research looks ahead to the prospects of wide bandgap semiconductors in emerging application areas such as quantum computing and terahertz communications. This study provides a comprehensive theoretical foundation and technology roadmap for the application of wide bandgap semiconductor materials in high-power electronic devices, contributing to the development of next-generation high-efficiency energy conversion and management systems.
基金supported by the National Key Research and Development Program of China(No.2023YFF0720700)the National Natural Science Foundation of China(Nos.52032010 and 52272120)the Central Government Funds of Guiding Local Scientific and Technological Development for Sichuan Province(No.2022ZYD0018).
文摘The types of dopants lead to distinctive microstructural evolution behavior and physical properties in materials.In this study,the effect of stoichiometric and non-stoichiometric Mn modification,namely Pb(Mn_(1/3) Nb_(2/3))O_(3)(PMnN)and MnO_(2),on the microstructure and properties of Pb(Yb_(1/2) Nb_(1/2))O_(3)-PbZrO_(3)-PbTiO_(3)(PYN-PZT)piezoelectric ceramics are systematically investigated.It was found that stoichiometric PMnN modification inhibits the grain growth while non-stoichiometric MnO_(2) modification promotes it,and thus the former yields stronger high-power characteristics(higher internal bias field Ei and larger mechanical quality factor Q_(m))than the latter.Specifically,with an equivalent amount of Mn modifica-tion(2 mol%),PMnN and MnO_(2) modification PYN-PZT ceramics exhibit significantly different values for average grain size(1.21μm vs.14.12μm),Ei(8.5 kV/cm vs.5 kV/cm),and Qm(2376 vs.1134).To further evaluate high-power performance,the vibration velocity v of these two modified PYN-PZT under high driving conditions was measured.Under an AC electric field of 3.5 V/mm,the PYN-PZT+6PMnN ceram-ics exhibit a v of up to 0.95 m s^(−1),larger than both MnO2-doped PYN-PZT(0.72 m s^(−1))and unmodified PYN-PZT ceramics(0.1 m s^(−1)),and far outperformance than both PZT-4 and PZT-8 ceramics.Furthermore,to elucidate the origin of the exceptional high-power performance of PMnN-modified PYN-PZT,we per-formed phase-field simulations revealing a pinning effect of the grain boundary on domain wall motion.Consequently,the small grain size(high grain boundary density)in PMnN-modified PYN-PZT exhibits a strong pinning effect,resulting in a large Q_(m) and outstanding high-power performance.
基金supported by the National Natural Science Foundation of China(41325017,41274158,41274157,and 41421063)the fundamental research funds for the central universitiesThousand Young Talents Program of China
文摘One of the important effects of the ionospheric modification by high-power waves is the airglow enhancement. Both the thermal electrons and the dissociation recombination contribute to generate the airglow emissions during HF heating. However, the relative importance of the airglow emission induced by dissociative recombination and thermal electrons has been rarely investigated. In this study, we carry out a simulation study on the airglow produced by high-power HF heating at nighttime associated with dissociative recombination and thermal electrons. SAMI2(Sami2 is Another Model of the Ionosphere) is employed to simulate the ionospheric variations during the HF heating. The main conclusions from this study are as follows:(1) For the airglow induced by dissociative recombination, both 630.0 nm and 557.7 nm emissions show a decrease at the heating wave reflection height during the heating period,while when the heating is turned off, an increase is shown at lower altitudes. The reduction of airglow during the heating is caused by the rapid increase of electron temperature and the diffusion of plasmas dominates the after-heating airglow enhancement.(2) 630.0 nm emission due to thermal electrons is greatly enhanced at the wave reflection height, indicating that thermal electrons play a major role in exciting 630.0 nm emission. For the 557.7 nm emission, the excitation threshold(4.17 e V) is too high for thermal electrons.(3) The combined effect of dissociative recombination and thermal electrons could be the possible reason for the observed X-mode(extraordinary mode) suppression of 630.0 nm airglow during O-mode(ordinary mode) enhancement.
基金Research and Development Project on Voltage Sensors by China Southern Power Grid Digital Research Institute(210000KK52220017)。
文摘Lead magnesium niobate-lead titanate(PMN-PT)piezoelectric single crystals are widely utilized due to their outstanding performance,with varying compositions significantly impacting their properties.While application of PMN-PT in high-power settings is rapidly evolving,material parameters are typically tested under low signal conditions(1 V),and effects of different PT(PbTiO_(3))contents on the performance of PMN-PT single crystals under high-power conditions remain unclear.This study developed a comprehensive high-power testing platform using the constant voltage method to evaluate performance of PMN-PT single crystals with different PT contents under high-power voltage stimulation.Using crystals sized at 10 mm×3 mm×0.5 mm as an example,this research explored changes in material parameters.The results exhibit that while trend of the parameter changes under high-power excitation was consistent across different PT contents,degree of the change varied significantly.For instance,a PMN-PT single crystal with 26%(in mol)PT content exhibited a 25%increase in the piezoelectric coefficient d_(31),a 13%increase in the elastic compliance coefficient s_(11)^(E),a 17%increase in the electromechanical coupling coefficient k_(31),and a 73%decrease in the mechanical quality factor Q_(m) when the power reached 7.90 W.As the PT content increased,the PMN-PT materials became more susceptible to temperature influences,significantly reducing the power tolerance and more readily reaching the depolarization temperatures.This led to loss of piezoelectric performance.Based on these findings,a clearer understanding of impact of PT content on performance of PMN-PT single crystals under high-power applications has been established,providing reliable data to support design of sensors or transducers using PMN-PT as the sensitive element.
文摘High-power laser technology is widely used in manufacturing processing,medical diagnosis,and treatment,and is one of the important fields of strategic high-tech competition in China at the moment.In the context of industrial upgrading,high-power laser technology plays an important role in leading the development of the manufacturing industry and industrial intelligence.Based on this,this paper carries out research on high-power laser technology and industry,summarizes the basic principle and classification of high-power laser technology,analyzes the current status of high-power laser technology industry,points out the opportunities and challenges faced by the industry development,puts forward suggestions to promote the development of high-power laser technology industry,and to provide an effective reference for the application and development of high-power laser technology.
基金The Consortium for Scientific Research,Indore(CSR,Indore)(No.CRS/2021-22/01/426)is acknowledged by the authorsFor the research facilities,the authors are grateful to CHARUSAT University.
文摘The rapid advancement of modern electronics has led to a surge in solid electronic waste,which poses significant environmental and health challenges.This review focuses on recent developments in paper-based electronic devices fabricated through low-cost,hand-printing techniques,with particular emphasis on their applications in energy harvesting,storage,and sensing.Unlike conventional plastic-based substrates,cellulose paper offers several advantages,including biodegradability,recyclability,and low fabrication cost.By integrating functional nanomaterials such as two-dimensional chalcogenides,metal oxides,conductive polymers,and carbon-based structures onto paper,researchers have achieved high-performance devices such as broadband photodetectors(responsivity up to 52 mA/W),supercapacitors(energy density~15.1 mWh/cm^(2)),and pressure sensors(sensitivity~18.42 kPa^(-1)).The hand-printing approach,which eliminates the need for sophisticated equipment and toxic solvents,offers a promising route for scalable,sustainable,and disposable electronics.This review outlines fabrication methods and key performance metrics,and discusses the current challenges and future directions for realizing robust,flexible devices aligned with green technology and the United Nation’s Sustainable Development Goals.
基金supported by the Rutgers Startup Package,NJ Health Foundation(Grant No.PC 221-25)Rutgers-New Brunswick OVPR Behavioral Health and Equity Pilot Seed Funding Award,MIT Lincoln Lab Collaboration Award,NJ Commission on Brain Injury Research(Grant No.CBIR25IRG024)the National Research Foundation(Grant No.RS-2024-00406674)funded by the Ministry of Science and ICT of Korea.
文摘Skin-integrated wearable electronics enable continuous,medical-grade monitoring and therapy in daily life,but must balance conflicting needs related to mechanics,power,and communication.This review uses a dual-interface approach that separates the sensor-receiver interface,which handles wireless data and energy transfer,from the sensor-skin interface,where physiological signals are converted and mechanical and biological integration occur.We first reviewed wireless connections designed for skin electronics,focusing on Bluetooth Low Energy(BLE),Radio Frequency Identification(RFID)/Near-Field Communication(NFC)systems,and hybrid systems.Next,we examine sensor-skin interfaces ranging from mediated contact layers such as hydrogels for wearable ultrasound and soft conductive electrodes,to skin-conformal direct-contact methods based on structural mechanics,and ultrathin epidermal devices.Finally,we discuss cross-interface coupling,emphasizing how antenna layouts,power budgets,and body-induced RF effects limit mechanical design,and how skin mechanics influence link reliability.We conclude by exploring opportunities in battery-free and energy-autonomous systems,body-coupled communication,and integration with artificial intelligence(AI)-enabled digital health,positioning future electronic skins as soft,networked platforms that are comfortable and reliable.
文摘The growing demand for efficient high-power switching power supplies has spurred interest in advanced topologies.The three-phase VIENNA converter stands out for its high power factor,simplified structure,and robust performance.Current research focuses on its operational principles,control strategies,and behavior under various load conditions.Key considerations include component selection,thermal management,and EMI/EMC optimization.This topology finds applications across renewable energy systems,industrial equipment,telecommunications,and electric vehicle charging infrastructures.Comparative analyses with alternative topologies and cost-benefit evaluations are also addressed.Future developments are expected to emphasize the integration of wide-bandgap devices and advancements in digital control techniques to further enhance efficiency and system performance.
文摘This special issue will include reviews,regular papers,and short communications,and reports in the fields for next generation electronics and photonics.The topics include but not restricted in advanced microelectronic devices and materials,low-dimensional materials and novel nanodevice applications,flexible/wearable/implantable electronics,wide bandgap semiconductor materials and devices,photoelectronics,photonics,advanced display technologies,nanophotonics,integrated quantum photonics,photovoltaics,energy harvesting and self-powered wireless sensing,sensors,micro-actuators,MEMS,microfluidics,and bioMEMS,etc.
