期刊文献+
共找到1,195篇文章
< 1 2 60 >
每页显示 20 50 100
Spatial Distribution and Tectonic Evolution of Ultrahigh-P(UHP) and High-P(HP) Metamorphic Belts in Central and Eastern China
1
作者 J.G.Liou W.G.Ernst +7 位作者 Xiaomin WANG Ruyuan ZHANG E.Eide Jun LIU S.Maruyama Leslie Ames Gaozhi ZHOU Yuanjun LIU 《资源环境与工程》 2016年第B04期76-88,共13页
关键词 UHP Spatial Distribution and Tectonic Evolution of Ultrahigh-p and high-p HP Metamorphic Belts in Central and Eastern China
在线阅读 下载PDF
High-pressure/low-temperature Metamorphism in Northern Hubei Province,Central China
2
作者 G.Zhou Y.J.Liu +2 位作者 E.A.Eide J.G.Liou W.G.Ernst 《资源环境与工程》 2016年第B04期89-104,共16页
The Qinling-Dabie accretionary fold belt in east-central China represents the E-W trending suture zone between the Sino-Korean and Yangtze cratons. A portion of the accretionary complex exposed in northern Hubei Provi... The Qinling-Dabie accretionary fold belt in east-central China represents the E-W trending suture zone between the Sino-Korean and Yangtze cratons. A portion of the accretionary complex exposed in northern Hubei Province contains a high-pressure / low-temperature metamorphic sequence progressively metamorphosed from the blueschist through greenschist to epidote-amphibolite / eclogite facies. The Hongan metamorphic belt can be divided into three metamorphic zones,based on progressive changes in mineral assemblages: Zone Ⅰ,in the south,is characterized by transitional blueschist-greenschist facies; ZoneⅡis characterized by greenschist facies; ZoneⅢ,in the northern most portion of the belt,is characterized by eclogite and epidote-amphibolite facies sequences. Changes in amphibole compositions from south to north as well as the appearance of increasingly higher pressure mineral assemblages toward the north document differences in metamorphic P-T conditions during formation of this belt. Preliminary P-T estimates for Zone I metamorphism are 5 ~ 7 kbar,350 ~ 450℃; estimates for Zone III eclogites are 10 ~ 22 kbar,500 ±50℃. The petrographic,chemical and structural characteristics of this metamorphic belt indicate its evolutionin a northward-dipping subduction zone and subsequent uplift prior to and during the final collisionbetween the Sino-Korean and Yangtze cratons. 展开更多
关键词 central China ECLOGITE high-p/T belt transitional blueschist-greenschist
在线阅读 下载PDF
Integrated P-T Paths of the High-Pressure Rocks and Their Tectonic Implications for the Mountain-Building of the North Qilian, China
3
作者 陈维民 黄永清 +6 位作者 饭冢义之 罗清华 吴汉泉 宋述光 杨经绥 许志琴 杨宏义 《Acta Geologica Sinica(English Edition)》 SCIE CAS CSCD 2002年第1期44-62,共19页
After the integration of petrographic study, geothermobarometry and Gibbs method, the synthetic P-T paths for the rocks from different geological profiles in the North Qilian, China, have been derived. The composite P... After the integration of petrographic study, geothermobarometry and Gibbs method, the synthetic P-T paths for the rocks from different geological profiles in the North Qilian, China, have been derived. The composite P-T paths from different methods indicate that all the high-pressure rocks in the Qilian area recorded P-T paths with clockwise loops starting at the blueschist facies, later reaching peak metamorphism at the blueschist facies, eclogite fades or epidote-amphibolite facies and ending up with the greenschist facies. The incremental Ar-Ar dating shows that the plateau ages for the high-pressure rocks range from 410 to 443 Ma. The plateau ages could be used as a minimum age constraint for the subduction that resulted in the formation of these high-pressure rocks in the Qilian area. It is proposed that the late-stage decompressional and cooling P-T paths with ends at the greenschist facies for these high-pressure rocks probably reflect the uplift process which could occur after shifting the arc-trench tectonic system to the system of continental orogenic belts. The retrograde paths for the high-pressure rocks in the North Qilian tectonic belt are characterized by dramatic decompression with slight cooling, which suggests very rapid exhumation. Petrography supports that the mountain-building for the Qilian mountain range could undergo a very fast process which caused rapid uplift and denudation. 展开更多
关键词 PETROLOGY integrated P-T path high-pressure rocks mountain-building of North Qilian China
在线阅读 下载PDF
Some High-P-Subtype and Low-P-Subtype F-Rich Granites in South China 被引量:1
4
作者 刘昌实 黄小龙 +3 位作者 王汝成 尹琳 陈小明 陈培荣 《Chinese Journal Of Geochemistry》 EI CAS 1998年第4期320-330,共11页
The F-rich granites in South China could be distinguished as the high-p subtype andthe low-p subtype according to their P2O5 contents. There are obvious differences in chemicalcomopition of these two subtypes. The hig... The F-rich granites in South China could be distinguished as the high-p subtype andthe low-p subtype according to their P2O5 contents. There are obvious differences in chemicalcomopition of these two subtypes. The high-p subtype is strongly peraluminous and characterized by low silica and very low REE contents, while the low-p subtype is weakly peraluminousand characterized by high silica and very high REE contents. There are also some differences inchemical compositions of feldspars and micas for these two subtypes. The phosphorus of thehigh-p subtype mainly appears to be in the feldspar structure as PAISi-2 substitution or subordinately in amblygonite as an accessory mineral, while the phosphorus of the low-p subtype ismainly in apatite and other phosphate minerals. 展开更多
关键词 酸性岩 华南地区 富氟花岗岩 五氧化二磷 矿物学
在线阅读 下载PDF
自然堆积煤矸石制备P型分子筛试验研究
5
作者 张荣新 李凯龙 +2 位作者 韩敏 刘祎 李文龙 《辽宁化工》 2025年第7期1077-1080,共4页
以辽宁省抚顺市望花区自然堆积的煤矸石为原料,经XRF检测,n(SiO_(2))/n(AL_(2)O_(3))的物质的量比为4.5∶1,符合合成P型分子筛的条件,采用酸浸除铁-水热合成法制备了P型分子筛,并采用SEM、XRD技术对合成的P型分子筛进行检测和微观表征分... 以辽宁省抚顺市望花区自然堆积的煤矸石为原料,经XRF检测,n(SiO_(2))/n(AL_(2)O_(3))的物质的量比为4.5∶1,符合合成P型分子筛的条件,采用酸浸除铁-水热合成法制备了P型分子筛,并采用SEM、XRD技术对合成的P型分子筛进行检测和微观表征分析,同时探究了合成的P型分子筛的氨氮吸附效果。结果表明:产物呈P型分子筛的羊毛球形态,其表面光滑,晶体结构边界相对清晰,但酸浸除铁过程流失了铝源,未另外添加补充铝源,导致其反应底物的硅铝比偏高,最终产物中除P型分子筛外,同时产生沸石、硅酸盐等物质。当合成的P型分子筛用量为5 g时,氨氮的吸附率趋于稳定,达72.41%;当吸附时间为40 min时,吸附率稳定在72%左右,达到了吸附平衡。 展开更多
关键词 高铁煤矸石 P型分子筛 除铁 碱熔
在线阅读 下载PDF
概率Weibull模型在自行车车架疲劳寿命预测的研究 被引量:1
6
作者 张良 《机械设计与制造》 北大核心 2025年第4期26-31,35,共7页
针对山地自行车车架在工作载荷作用下,分析了其疲劳寿命。从疲劳失效位置(接缝材料)和母材上取下的试样进行了高周疲劳试验,通过S-N区域的正态分布和数据的线性回归斜率对比分析了实验数据,表明在疲劳性能方面的统计没有差异性。采用有... 针对山地自行车车架在工作载荷作用下,分析了其疲劳寿命。从疲劳失效位置(接缝材料)和母材上取下的试样进行了高周疲劳试验,通过S-N区域的正态分布和数据的线性回归斜率对比分析了实验数据,表明在疲劳性能方面的统计没有差异性。采用有限元分析了不同加载情况下最大主应力对应车架上的疲劳失效位置,车架疲劳失效理论分析位置与实际裂纹位置基本吻合,在此基础上基于概率Weibull模型(P-S-N曲线),分别采用平均应力法、高应力体积法和最薄弱环节理论对车架进行了分析,结果表明踏板力的施加角度影响自行车车架的疲劳特性,同时估算了最大主应力下车架的疲劳寿命。 展开更多
关键词 高周疲劳 25CrMo4钢 自行车车架 疲劳寿命 P-S-N曲线
在线阅读 下载PDF
GH4169镍基高温合金超高频振动疲劳实验 被引量:1
7
作者 王昭晗 潘凯 +3 位作者 陈永辉 杭超 王永杰 燕群 《航空材料学报》 北大核心 2025年第2期110-118,共9页
为解决航空发动机常用GH4169镍基高温合金超高周疲劳问题,基于压电超声疲劳测试系统,设计出一种可实现20 kHz超高频振动疲劳试样并完成测试;获得常温环境下GH4169镍基高温合金在不同存活概率5%、50%及95%下超高周振动疲劳P-S-N曲线。测... 为解决航空发动机常用GH4169镍基高温合金超高周疲劳问题,基于压电超声疲劳测试系统,设计出一种可实现20 kHz超高频振动疲劳试样并完成测试;获得常温环境下GH4169镍基高温合金在不同存活概率5%、50%及95%下超高周振动疲劳P-S-N曲线。测试结果表明:GH4169材料的疲劳寿命在达到10^(7)周次后曲线呈下降趋势,没有出现疲劳极限,试样仍发生疲劳破坏。断口分析表明:超高周疲劳裂纹大多起源于试样表面或亚表面的位置,存在单点起裂和多源起裂的情况,起裂方式表现为表面滑移起裂与非金属夹杂物滑移起裂两种形式。 展开更多
关键词 航空发动机 镍基高温合金 超高频振动 超高周疲劳 P-S-N曲线
在线阅读 下载PDF
中碳高硅Q&P钢马氏体相变动力学 被引量:4
8
作者 刘曼 周明星 +2 位作者 陈振业 尹伟凡 徐光 《钢铁》 北大核心 2025年第3期117-124,共8页
目前常用经典的K-M(Koistinen-Marburger)模型描述钢的马氏体相变动力学,但模型的准确性与钢种成分密切相关。基于不同冷却速率的淬火试验,采用膨胀法、金相法研究了常见中碳高硅淬火-配分(Q&P)钢的马氏体相变动力学规律,并基于传统... 目前常用经典的K-M(Koistinen-Marburger)模型描述钢的马氏体相变动力学,但模型的准确性与钢种成分密切相关。基于不同冷却速率的淬火试验,采用膨胀法、金相法研究了常见中碳高硅淬火-配分(Q&P)钢的马氏体相变动力学规律,并基于传统K-M模型建立了适用于中碳高硅Q&P钢的改进马氏体相变动力学模型,并对其进行了验证。结果表明,不同冷却速率下,中碳高硅Q&P钢的马氏体相变动力学曲线呈“S”形,而不是“C”形,相变过程可分为开始相变的加速期、中间相变的高速期和最后相变的减速期,这可能是马氏体的自回火现象引起的。此外,靠近马氏体相变开始温度形成的马氏体较为粗大,此时温度较高,碳从过饱和马氏体板条扩散到周围未转化的奥氏体中,奥氏体碳富集增加了残余奥氏体的稳定性,使得过冷度需要进一步增加才能继续发生马氏体相变,从而降低了残余奥氏体的马氏体相变开始温度。马氏体相变动力学方程指数β为1~2的常数。β值对淬火温度的敏感性取决于钢的碳含量。碳含量升高时,β值对淬火温度的敏感性显著降低,基本可以忽略。速率参数α为淬火温度的3次多项式函数,随着冷却速率的增加,速率参数α逐渐降低,这表明马氏体相变可能是一个与时间有关的相变;而方程指数β逐渐增加,这与奥氏体塑性调节对马氏体相变的抑制作用有关。改进K-M模型考虑了马氏体相变的瞬时动力学特性,与试验数据的匹配度较传统K-M模型更好。 展开更多
关键词 中碳高硅Q&P钢 马氏体相变 动力学模型 速率参数 方程指数 改进K-M模型 高级钢 TRIP效应
原文传递
High-P/T experimental studies and water in the silicate mantle 被引量:4
9
作者 YANG XiaoZhi LI Yan 《Science China Earth Sciences》 SCIE EI CAS CSCD 2016年第4期683-695,共13页
Water(or H) in the silicate mantle is a key element in influencing Earth's climate, habitability, geochemical evolution, geophysical properties and geodynamical processes, and has received increasing attention in ... Water(or H) in the silicate mantle is a key element in influencing Earth's climate, habitability, geochemical evolution, geophysical properties and geodynamical processes, and has received increasing attention in the past decades. Experimental work under simulated high-pressure and high-temperature conditions is a powerful tool in characterizing the species, distribution, storage capacity and various physicochemical impacts of water in the mantle. In recent years, significant approaches have been acquired about some key physical, chemical and dynamical properties of water in the mantle and their various impacts, as a result of extensive studies by high-pressure and temperature experiments, and our knowledge of Earth's water cycle, especially the deep water cycle, on both temporal and spatial scales has been greatly enhanced. In this paper, a brief review based mainly on experimental studies is presented concerning the current understanding and some recent approaches of water in the silicate mantle, such as the possible origin, amount, storage and the effect on mantle properties. 展开更多
关键词 high-p/T experiments Silicate mantle WATER
原文传递
电镀Ni-Co-P合金及其镀层的耐磨耐蚀性能研究
10
作者 陶燕 孙皓 郑成博 《电镀与精饰》 北大核心 2025年第5期39-44,共6页
针对电镀过程中,电解液流动不畅或沉淀导致镀层中的微粒分散效果不佳的问题,研究了电镀Ni-Co-P合金及其镀层的耐磨、耐蚀性能。试验采用硫酸镍、硫酸钴、次亚磷酸钠等原料,在pH值为4.5、温度为60℃的条件下,分别电镀30、40和50 min,并加... 针对电镀过程中,电解液流动不畅或沉淀导致镀层中的微粒分散效果不佳的问题,研究了电镀Ni-Co-P合金及其镀层的耐磨、耐蚀性能。试验采用硫酸镍、硫酸钴、次亚磷酸钠等原料,在pH值为4.5、温度为60℃的条件下,分别电镀30、40和50 min,并加入30 g/L硼酸,以改善镀液的流动性和微粒的分散性。制备出了三种电镀时长不同、稳定且均匀的试样,并进行不同测试,评估其力学性能及耐热腐蚀性。结果显示,电镀50 min制备的Ni-Co-P镀层不仅力学性能优异,且耐热腐蚀性良好,是制备高质量镀层的优选电镀时长。 展开更多
关键词 电镀Ni-Co-P镀层 耐磨性能 弹性模量 高温腐蚀 磨痕宽度
在线阅读 下载PDF
Significance of phosphorous (P)- and magnesium (Mg)-bearing high-Al titanite in high-pressure marble from Yangguantun,Rongcheng County, Shandong Province 被引量:4
11
作者 叶凯 叶大年 《Chinese Science Bulletin》 SCIE EI CAS 1996年第14期1194-1197,共4页
Titanite is a widespread accessory mineral in metamorphic rocks. The united exchange Ti+O=(Al, Fe<sup>3+</sup>)+(OH, F) is now recognized as a common substitution in metamorphic titanite. Five theoretica... Titanite is a widespread accessory mineral in metamorphic rocks. The united exchange Ti+O=(Al, Fe<sup>3+</sup>)+(OH, F) is now recognized as a common substitution in metamorphic titanite. Five theoretical titanite end-members were recognized by Smith: CaTiSiO<sub>4</sub>O (oxy-titano-titanite), CaAlSiO<sub>4</sub>OH (hydroxy-alumino-titanite), CaAlSiO<sub>4</sub>F (flour-aluminotitanite), CaFeSiO<sub>4</sub>OH (hydroxy-ferri-titanite) and CaFeSiO<sub>4</sub>F (flour-ferri-titanite). 展开更多
关键词 high-Al TITANITE P- and Mg-bearing TITANITE high-pressure MARBLE Shandong.
在线阅读 下载PDF
具有高击穿和低损耗的集电极浮空P区IGBT的研究
12
作者 石宽 彭奂异 +2 位作者 黄靖 俞宏坤 曾韡 《复旦学报(自然科学版)》 北大核心 2025年第5期513-518,528,共7页
为实现更高的能源转换效率,优化绝缘栅双极晶体管(IGBT)的导通压降和关断损耗之间的折中关系,同时提高IGBT的阻断特性,本文提出了一种集电极浮空P区结构的绝缘栅双极型晶体管(CFP-IGBT),通过在集电极区域实施多次P型杂质离子注入形成P... 为实现更高的能源转换效率,优化绝缘栅双极晶体管(IGBT)的导通压降和关断损耗之间的折中关系,同时提高IGBT的阻断特性,本文提出了一种集电极浮空P区结构的绝缘栅双极型晶体管(CFP-IGBT),通过在集电极区域实施多次P型杂质离子注入形成P区,P区可辅助耗尽集电极侧漂移区内的电荷,进而提高正向阻断下集电极侧的电场强度,获得更高的击穿电压;在器件关断阶段,P区减少了电场扩展后剩余非耗尽区的宽度和过剩载流子的数量,从而降低关断损耗、减少拖尾电流,进而有效改善了导通压降与关断损耗的折中关系。实验的仿真结果显示,CFP-IGBT相较于传统沟槽栅场截止IGBT(FS-IGBT)的耐压能力提升了10%,关断损耗则降低了15%。相同击穿电压为1400 V时,CFP-IGBT晶圆的厚度可进一步减薄10%;导通压降为1.5 V时,其关断损耗降低可超过50%。 展开更多
关键词 绝缘栅双极型晶体管 浮空P区 高击穿 损耗降低
在线阅读 下载PDF
高压硅基p-GaN栅结构GaN HEMT器件阈值电压稳定性研究
13
作者 潘传奇 王登贵 +4 位作者 周建军 王金 章军云 李忠辉 陈堂胜 《固体电子学研究与进展》 2025年第3期11-15,共5页
基于硅基p-GaN/Al GaN/Ga N异质结材料,研制了一款横向结构的高压增强型Ga N高电子迁移率晶体管(GaN high electron mobility transistor,GaN HEMT)器件。采用自对准栅刻蚀与双层介质钝化实现了良好的阈值电压稳定性,并结合多场板峰值... 基于硅基p-GaN/Al GaN/Ga N异质结材料,研制了一款横向结构的高压增强型Ga N高电子迁移率晶体管(GaN high electron mobility transistor,GaN HEMT)器件。采用自对准栅刻蚀与双层介质钝化实现了良好的阈值电压稳定性,并结合多场板峰值抑制技术提升了器件的击穿特性。该器件的阈值电压为1.35 V(VGS=VDS,I_(DS)=1μA/mm),比导通电阻为2.95 mΩ·cm^(2)(VGS=6 V),击穿电压超过1800 V(VGS=0 V,I_(DS)=1μA/mm)。研究了栅极和漏极偏压应力对阈值电压稳定性的影响,在8 V栅极偏压下,阈值电压负移约10%;在1200 V漏极偏压下,阈值电压正移小于20%。上述结果表明,基于硅衬底的p-GaN栅结构Al GaN/GaN HEMT在1200V电压等级应用中展现出巨大的潜力。 展开更多
关键词 高压 ALGAN/GAN p-GaN栅 阈值电压 稳定性
原文传递
High-pressure granulite from Western Kunlun,northwestern China:Its metamorphic evolution,zircon SHRIMP U-Pb ages and tectonic implication 被引量:8
14
作者 QU JunFeng ZHANG LiFei +4 位作者 AI YongLiang L Zeng WANG JianPing ZHOU Hui WANG ShiYan 《Science China Earth Sciences》 SCIE EI CAS 2007年第7期961-971,共11页
High-pressure mafic granulites occurring as lenticular bodies within garnet-amphibolites in Kangxiwar Fault have been first reported in this paper. The P-T conditions of two metamorphic stages were obtained using cali... High-pressure mafic granulites occurring as lenticular bodies within garnet-amphibolites in Kangxiwar Fault have been first reported in this paper. The P-T conditions of two metamorphic stages were obtained using calibrated geothermal barometers and ThermoCalc Program. The peak metamorphic condition of these high-pressure granulites is about 760–820°C, 1.0–1.2 GPa and the retrograde metamorphic condition is about 620–720°C, 0.7–0.8 GPa. The petrological studies show that they have a near-isobaric cooling P-T path which suggests that the Western Kunlun underwent initial crustal thickening, subsequent exhumation and cooling. The SHRIMP zircon U-Pb dating gives two groups of ages for high-pressure granulites. One is 177±6 Ma which is obtained from the rim of the zircon. We consider this age should be the metamorphic age. And the other is 456±30 Ma which is obtained from the core of the zircon and should be the protolith age. The formation of these high-pressure granulites in western Kunlun is closely correlated with the evolution of the Paleo-Tethys and has important implications for the research on Tethys and Paleo-Asian tectonic zone. 展开更多
关键词 WESTERN KUNLUN Kangxiwar Fault high-pressure GRANULITE P-T path SHRIMP U-PB DATING of ZIRCON
原文传递
高温液态水中羟基苯甲酸及对羟基间苯二甲酸脱羧反应动力学研究
15
作者 张博 赵彬彬 +2 位作者 寇祖星 岳金彩 张峻赫 《江西化工》 2025年第5期62-66,共5页
本文研究了在170℃~200℃温度范围内,高温液态水中邻羟基苯甲酸、对羟基苯甲酸以及对羟基间苯二甲酸的脱羧反应及动力学。实验结果表明,邻羟基苯甲酸、对羟基苯甲酸脱羧反应生成苯酚为一级反应;对羟基间苯二甲酸的脱羧过程为平行-连串... 本文研究了在170℃~200℃温度范围内,高温液态水中邻羟基苯甲酸、对羟基苯甲酸以及对羟基间苯二甲酸的脱羧反应及动力学。实验结果表明,邻羟基苯甲酸、对羟基苯甲酸脱羧反应生成苯酚为一级反应;对羟基间苯二甲酸的脱羧过程为平行-连串复合反应。使用一级反应动力学方程模型对邻羟基苯甲酸、对羟基苯甲酸脱羧反应进行拟合,以此为基础对对羟基间苯二甲酸的脱羧反应动力学进行拟合,计算了各反应的活化能和指前因子。本研究为水杨酸残渣的资源化利用提供了实验依据和理论指导。 展开更多
关键词 高温液态水 脱羧反应动力学 邻羟基苯甲酸 对羟基苯甲酸 对羟基间苯二甲酸
在线阅读 下载PDF
Study and implication of the high-pressure felsic granulite in the Qinling complex of East Qinling 被引量:17
16
作者 刘良 周鼎武 +2 位作者 王焰 陈丹玲 刘雁 《Science China Earth Sciences》 SCIE EI CAS 1996年第S1期60-68,共9页
There is a typical assemblage of garnet + kyanite + microperthite + quartz + rutile in high-pressure (HP) felsic granulite of Qinling complex in Songshugou area. East Qinling. The HP granulite was formed at 800 -900℃... There is a typical assemblage of garnet + kyanite + microperthite + quartz + rutile in high-pressure (HP) felsic granulite of Qinling complex in Songshugou area. East Qinling. The HP granulite was formed at 800 -900℃ and 1.3 -1.6GPa and has experienced two stages of retrograde metamorphism at 600- 650 ℃, 0.8-1.0GPa and 500-600℃, 0.3-0.6GPa, forming two retrograde metamorphic assemblages of margarite + plagiodase (PlI)+quartz and sillimanite + biotite + plagioclase(PlII) + microdine+quartz, respectively. They construct a two-stage clockwise P-T path which shows down-pressure cooling in both early and late stage. 展开更多
关键词 QINLING COMPLEX high-pressure felsic GRANULITE METAMORPHISM P-T path EAST Qinling.
原文传递
微波消解-ICP-OES测定高碳铬铁中磷含量
17
作者 赵文文 任亦然 +2 位作者 鲜胤 刘勇军 易勇 《化工管理》 2025年第18期45-47,51,共4页
文章建立了一种以微波消解溶解样品结合电感耦合等离子发射光谱分析测试的检测方法,研究了不同比例的盐酸和硝酸混合酸对消解效果的影响。以盐酸和硝酸混合酸再加氢氟酸和高氯酸冒烟的方法对高碳铬铁标准样品进行前处理,以P元素178.2 n... 文章建立了一种以微波消解溶解样品结合电感耦合等离子发射光谱分析测试的检测方法,研究了不同比例的盐酸和硝酸混合酸对消解效果的影响。以盐酸和硝酸混合酸再加氢氟酸和高氯酸冒烟的方法对高碳铬铁标准样品进行前处理,以P元素178.2 nm为检测谱线,使用4家五个高碳铬铁标准样品进行了分析,实验得出检出限、正确度和精密度分别为0.176%、95.8%~100.0%、2.38%~4.65%。 展开更多
关键词 微波消解 电感耦合等离子发射光谱法 高碳铬铁
在线阅读 下载PDF
退火处理对TC4_(p)/TiAl复合材料显微组织和高温力学性能的影响
18
作者 沈世嘉 陶慧 +1 位作者 李慧中 梁霄鹏 《湖南有色金属》 2025年第5期63-68,共6页
采用X射线衍射分析(XRD)、金相显微镜(OM)、电子显微镜(SEM)、透射电子显微镜(TEM)以及高温拉伸力学性能测试和三点弯曲试验等手段,研究了900℃不同时间退火处理对粉末冶金方法制备的TC4颗粒增强TiAl基复合材料的显微组织和高温拉伸力... 采用X射线衍射分析(XRD)、金相显微镜(OM)、电子显微镜(SEM)、透射电子显微镜(TEM)以及高温拉伸力学性能测试和三点弯曲试验等手段,研究了900℃不同时间退火处理对粉末冶金方法制备的TC4颗粒增强TiAl基复合材料的显微组织和高温拉伸力学性能以及高温断裂韧性的影响。结果表明:退火处理后颗粒中的β_(o)(ω_(o))硬脆相分解为γ和α_(2)相,提高了材料的塑性和断裂韧性,退火40h时,800℃的高温拉伸伸长率达到18.5%,断裂韧性为17.3MPa·m^(1/2),抗拉强度仍保持567MPa,表现出最佳的综合性能。退火时间延长至60h时,晶界粗化导致沿晶开裂倾向增强,断裂韧性降低。 展开更多
关键词 TC4_(p)/TiAl复合材料 高温力学性能 高温断裂韧性 显微组织
在线阅读 下载PDF
武汉光源高频系统中P波段160 kW连续波环行器的研制
19
作者 肖诚成 张强 +3 位作者 王程 张俊强 方文程 徐一茗 《核技术》 北大核心 2025年第1期42-49,共8页
在同步辐射高频腔设备工作过程中,反射功率的突然增大会导致环行器腔体温度升高,进而使环行器中旋磁铁氧体的参数特性产生变化,最终导致反射功率不能很好地被引导至吸收负载处。为了防止负载反射功率过高对功率源造成不可逆转的损伤,需... 在同步辐射高频腔设备工作过程中,反射功率的突然增大会导致环行器腔体温度升高,进而使环行器中旋磁铁氧体的参数特性产生变化,最终导致反射功率不能很好地被引导至吸收负载处。为了防止负载反射功率过高对功率源造成不可逆转的损伤,需要将高功率环行器的反射功率引导至吸收负载上,从而对功率源进行保护。因此,在环行器上设计增加温度补偿功能模块,对环行器的张量磁导特性进行补偿。介绍了国内首台带有温度补偿控制功能的P波段160 kW连续波环行器的研制。经过测试,环行器在中心频率499.654 MHz,带宽±5 MHz范围内的传输损耗低于0.1 dB,中心频率处可达到0.06 dB以下。输入口反射在输出端口全短路的最差情况下,仍然优于-29 dB。在使用恒温水箱模拟实际运行过程中的水温变化的过程中,温度补偿控制模块能让环行器性能保持最佳状态,验证了温度补偿模块功能的可靠性。 展开更多
关键词 铁氧体 环行器 温度补偿 P波段 高功率
原文传递
HPLC法测定复方氨酚烷胺颗粒中的对氨基酚杂质研究
20
作者 李传响 潘竹青 《中国现代药物应用》 2025年第1期172-174,共3页
目的建立复方氨酚烷胺颗粒中对氨基酚(PAP)杂质的高效液相色谱(HPLC)检测方法及质控要求。方法采用HPLC法,C18色谱柱(250 mm×4.6 mm,5μm),流动相为0.5%乙酸铵溶液水-甲醇(80∶20),DAD检测器,波长为245 nm,柱温为30℃,对复方氨酚... 目的建立复方氨酚烷胺颗粒中对氨基酚(PAP)杂质的高效液相色谱(HPLC)检测方法及质控要求。方法采用HPLC法,C18色谱柱(250 mm×4.6 mm,5μm),流动相为0.5%乙酸铵溶液水-甲醇(80∶20),DAD检测器,波长为245 nm,柱温为30℃,对复方氨酚烷胺颗粒中的对氨基酚杂质进行检测。结果采用本文建立的HPLC法可有效检测出复方氨酚烷胺颗粒所含的杂质对氨基酚,分离度可达4.3,检测限达0.2μg/ml,定量限为8μg/ml下回收率为98.96%。结论运用本文建立的HPLC法可以对含有对乙酰氨基酚成分的感冒药中杂质进行质量控制。 展开更多
关键词 复方氨酚烷胺 对乙氨基酚 高效液相色谱 杂质 对氨基酚
在线阅读 下载PDF
上一页 1 2 60 下一页 到第
使用帮助 返回顶部