As an invisible“endocrine organ”,gut microbiota is widely involved in the regulation of nervous system,endocrine system,circulatory system,and digestive system.It is also closely related to host health and the occur...As an invisible“endocrine organ”,gut microbiota is widely involved in the regulation of nervous system,endocrine system,circulatory system,and digestive system.It is also closely related to host health and the occurrence of many chronic diseases.Relevant literature shows that high temperature,low temperature,and highaltitude hypoxia may have negative effects on commensal microorganisms.The stimulation of exercise may aggravate this reaction,which is related to the occurrence of exercise-induced fever and gastrointestinal and respiratory diseases.The intervention of probiotics can alleviate the above problems to a certain extent.Therefore,this paper takes exercise in a special environment as the starting point,deeply analyses the intervention effect and potential mechanism of probiotics,and provides the theoretical basis and reference for follow-up research and application of probiotics in sports science.展开更多
Lithium-ion batteries(LIBs),while dominant in energy storage due to high energy density and cycling stability,suffer from severe capacity decay,rate capability degradation,and lithium dendrite formation under low-temp...Lithium-ion batteries(LIBs),while dominant in energy storage due to high energy density and cycling stability,suffer from severe capacity decay,rate capability degradation,and lithium dendrite formation under low-temperature(LT)operation.Therefore,a more comprehensive and systematic understanding of LIB behavior at LT is urgently required.This review article comprehensively reviews recent advancements in electrolyte engineering strategies aimed at improving the low-temperature operational capabilities of LIBs.The study methodically examines critical performance-limiting mechanisms through fundamental analysis of four primary challenges:insufficient ionic conductivity under cryogenic conditions,kinetically hindered charge transfer processes,Li+transport limitations across the solidelectrolyte interphase(SEI),and uncontrolled lithium dendrite growth.The work elaborates on innovative optimization approaches encompassing lithium salt molecular design with tailored dissociation characteristics,solvent matrix optimization through dielectric constant and viscosity regulation,interfacial engineering additives for constructing low-impedance SEI layers,and gel-polymer composite electrolyte systems.Notably,particular emphasis is placed on emerging machine learning-guided electrolyte formulation strategies that enable high-throughput virtual screening of constituent combinations and prediction of structure-property relationships.These artificial intelligence-assisted rational design frameworks demonstrate significant potential for accelerating the development of next-generation LT electrolytes by establishing quantitative composition-performance correlations through advanced data-driven methodologies.展开更多
This study focused on improving the cathode performance of Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.15)O_(3-δ)(BSCN)-based perovskite materials through molybdenum(Mo)doping.Pure BSCN and Mo-modified-BSCN—Ea_(0.6)Sr_(0.4)Co_(0...This study focused on improving the cathode performance of Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.15)O_(3-δ)(BSCN)-based perovskite materials through molybdenum(Mo)doping.Pure BSCN and Mo-modified-BSCN—Ea_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.1)Mo_(0.05)O_(3-δ)(B S CNM_(0.05)),Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.05)Mo_(0.1)O_(3-δ)(BSCNM_(0.1)),and Ba_(0.6)Sr_(0.4)Co_(0.85)Mo_(0.15)O_(3-δ)(BSCM)—with Mo doping contents of 5mol%,10mol%,and15mol%,respectively,were successfully prepared using the sol-gel method.The effects of Mo doping on the crystal structure,conductivity,thermal expansion coefficient,oxygen reduction reaction(ORR)activity,and electrochemical performance were systematically evaluated using X-ray diffraction analysis,thermally induced characterization,electrochemical impedance spectroscopy,and single-cell performance tests.The results revealed that Mo doping could improve the conductivity of the materials,suppress their thermal expansion effects,and significantly improve the electrochemical performance.Surface chemical state analysis using X-ray photoelectron spectroscopy revealed that 5mol%Mo doping could facilitate a high adsorbed oxygen concentration leading to enhanced ORR activity in the materials.Density functional theory calculations confirmed that Mo doping promoted the ORR activity in the materials.At an operating temperature of 600℃,the BSCNM_(0.05)cathode material exhibited significantly enhanced electrochemical impedance characteristics,with a reduced area specific resistance of 0.048Ω·cm~2,which was lower than that of the undoped BSCN matrix material by 32.39%.At the same operating temperature,an anode-supported single cell using a BSCNM_(0.05)cathode achieved a peak power density of 1477 mW·cm^(-2),which was 30.71%,56.30%,and 171.50%higher than those of BSCN,BSCNM_(0.1),and B SCM,respectively.The improved ORR activity and electrochemical performance of BSCNM_(0.05)indicate that it can be used as a cathode material in low-temperature solid oxide fuel cells.展开更多
The poor oxidation stability of ether-based solvents has long been a major challenge limiting their practical application.To enhance the oxidative stability of ether-based electrolytes,the physicochemical properties o...The poor oxidation stability of ether-based solvents has long been a major challenge limiting their practical application.To enhance the oxidative stability of ether-based electrolytes,the physicochemical properties of various glycol dimethyl ethers are screened,and diglyme(G2)is selected as the sole solvent for the electrolyte.Lithium bis(fluorosulfonyl)imide(LiFSI),a highly dissociative salt,is used as the primary salt;while lithium nitrate(LiNO_(3))and lithium difluorophosphate(LiDFP),which have small ionic sizes and strong binding energies,are added as secondary salts.The resulting electrolyte can modulate the electric double layer structure by NO_(3)^(-) and DFP^(-) on the cathode side,leading to an increased Liþconcentration that is originally repelled by the cathode.Additionally,the oxidation stability of the electrolyte is improved and the formed electrode-electrolyte interphase is more uniform and stable,thereby enhancing the electrochemical performance of the cells.As a result,cells assembled with a total of 1 M ternary lithium salts in G2 solvent can operate at high voltage of 4.4 V.The LijjNCM811 cells maintain 80.2%capacity retention after 270 cycles at room temperature,with an average Coulombic efficiency of 99.5%,and exhibit 88.4%capacity retention after 200 cycles at -30℃.展开更多
Polyethylene terephthalate(PET)fibers are the largest category of chemical fibers and are widely used.However,the dyeing of PET fibers requires high temperature and pressure(130℃and 0.2 MPa),and the dyeing process co...Polyethylene terephthalate(PET)fibers are the largest category of chemical fibers and are widely used.However,the dyeing of PET fibers requires high temperature and pressure(130℃and 0.2 MPa),and the dyeing process consumes huge amounts of energy.Existing studies have shown that the dyeing ability of PET is directly related to the size of the amorphous region,which determines the external conditions for dyeing.In this research,we synthesized a series of low-temperature easydyeing masterbatches,PET-co-polyethylene glycol(PETEG),using polyethylene glycol(PEG)with different number-average molecular masses Mn and additive amounts.The phase domain size of the amorphous region of PET fibers was regulated via the masterbatch method.The relationship between the phase domain size and dyeing performance was explored from three perspectives:the amount of masterbatch,type of masterbatch,and PEG relative molecular mass.The results indicate that the fiber sample with PEG(Mn=2000 g/mol)at a mass fraction of 20%modified masterbatch has a smaller crystalline lamellar thickness(5.59 nm)and a larger interlamellar amorphous layer thickness(6.43 nm).The increase in the long period and lamellar inclination angle results in a looser structure,allowing small molecule dyes to diffuse into the fibers more easily.The dye-uptake increases from 63.21%to 92.66%at 100℃with the addition of the masterbatch.Additionally,the dye-uptake of the modified fibers increases with the relative molecular mass of PEG and the mass fraction of the masterbatch.All modified fibers achieve a staining color fastness of grade 4 or higher.This research demonstrates a simple masterbatch method that enables atmospheric pressure dyeing and provides a practical solution for efficient,low-temperature,and low-energy dyeing of PET fibers.展开更多
Lithium-ion batteries are widely recognized as prime candidates for energy storage devices.Ethylene carbonate(EC)has become a critical component in conventional commercial electrolytes due to its exceptional film-form...Lithium-ion batteries are widely recognized as prime candidates for energy storage devices.Ethylene carbonate(EC)has become a critical component in conventional commercial electrolytes due to its exceptional film-forming properties and high dielectric constant.However,the elevated freezing point,high viscosity,and strong solvation energy of EC significantly hinder the transport rate of Li^(+)and the desolvation process at low temperatures.This leads to substantial capacity loss and even lithium plating on graphite anodes.Herein,we have developed an efficient electrolyte system specifically designed for lowtemperature conditions,which consists of 1.0 M lithium bis(fluorosulfonyl)imide(LiFSI)in isoxazole(IZ)with fluorobenzene(FB)as an uncoordinated solvent and fluoroethylene carbonate(FEC)as a filmforming co-solvent.This system effectively lowers the desolvation energy of Li^(+)through dipole-dipole interactions.The weak solvation capability allows more anions to enter the solvation sheath,promoting the formation of contact ion pairs(CIPs)and aggregates(AGGs)that enhance the transport rate of Li^(+)while maintaining high ionic conductivity across a broad temperature range.Moreover,the formation of inorganic-dominant interfacial phases on the graphite anode,induced by fluoroethylene carbonate,significantly enhances the kinetics of Li^(+)transport.At a low temperature of-20℃,this electrolyte system achieves an impressive reversible capacity of 200.9 mAh g^(-1)in graphite half-cell,which is nearly three times that observed with conventional EC-based electrolytes,demonstrating excellent stability throughout its operation.展开更多
Carbon nanofiber(CNF)was widely utilized in the field of electrochemical energy storage due to its superiority of conductivity and mechanics.However,CNF was generally prepared at relatively high temperature.Herein,nit...Carbon nanofiber(CNF)was widely utilized in the field of electrochemical energy storage due to its superiority of conductivity and mechanics.However,CNF was generally prepared at relatively high temperature.Herein,nitrogen-doped hard carbon nanofibers(NHCNFs)were prepared by a lowtemperature carbonization treatment assisted with electrospinning technology.Density functional theory analysis elucidates the incorporation of nitrogen heteroatoms with various chemical states into carbon matrix would significantly alter the total electronic configurations,leading to the robust adsorption and efficient diffusion of Na atoms on electrode interface.The obtained material carbonized at 600°C(NHCNF-600)presented a reversible specific capacity of 191.0 mAh g^(−1)and no capacity decay after 200 cycles at 1 A g^(−1).It was found that the sodium-intercalated degree had a correlation with the electrochemical impedance.A sodium-intercalated potential of 0.2 V was adopted to lower the electrochemical impedance.The constructed sodium-ion capacitor with activated carbon cathode and presodiated NHCNF-600 anode can present an energy power density of 82.1 Wh kg^(−1)and a power density of 7.0 kW kg^(−1).展开更多
To completely recover valuable elements and reduce the amount of waste,the impact of phosphoric acid on the decomposition of rare earth,fluorine and phosphorus during cyclic leaching was studied based on the character...To completely recover valuable elements and reduce the amount of waste,the impact of phosphoric acid on the decomposition of rare earth,fluorine and phosphorus during cyclic leaching was studied based on the characteristics of low-tempe rature sulfuric acid deco mposition.When a single monazite was leached using 75 wt% H_(2)SO_(4) solution with phosphoric acid,the size and number of monazite particles in the washing slag gradually decrease with the increase in phosphoric acid content in the leaching solution.The monazite phase can hardly be found in the slag when the phosphoric acid content reaches 70 g/L,which indicates that phosphoric acid is favorable for monazite decomposition.The mixed rare earth concentrate was leached by 75 wt% H_(2)SO_(4) containing 70 g/L phosphoric acid,the mineral compositions of the washing slag are only gypsum and unwashed rare earth sulfuric acid.After cyclic leaching of75 wt% H_(2)SO_(4),the mineral compositions of the primary leaching washing slag are mainly undecomposed monazite,rare earth sulfate and calcium sulfate.However,monazite is not found in the mineral phase of the second and third leaching washing slag.The leaching rates of rare earth and phosphorus gradually increase with the increase in cyclic leaching times.In addition,the phosphoric acid content in the leaching solution increases with the increase in the number of cyclic leaching time.However,the rising trend decreases when the phosphoric acid content reaches 50 g/L by adsorption and crystallization of phosphoric acid.A small amount of water can be used to clean the leaching residue before washing to recover the more soluble phosphorus acid according to the difference of dissolution between phosphoric acid and rare earth sulfuric acid.展开更多
Pear fruit senescence under high-and low-temperature conditions has been reported to be mediated by microRNAs.Long non-coding RNAs(lncRNAs),which can function as competing endogenous RNAs that interact with microRNAs,...Pear fruit senescence under high-and low-temperature conditions has been reported to be mediated by microRNAs.Long non-coding RNAs(lncRNAs),which can function as competing endogenous RNAs that interact with microRNAs,may also be involved in temperature-affected fruit senescence.Based on the transcriptome and microRNA sequencings,in this study,3330 lncRNAs were isolated from Pyrus pyrifolia fruit.Of these lncRNAs,2060 and 537 were responsive to high-and low-temperature conditions,respectively.Of these differentially expressed lncRNAs,82 and 24 correlated to the mRNAs involved in fruit senescence under high-and low-temperature conditions,respectively.Moreover,three lncRNAs were predicted to be competing endogenous RNAs(ceRNAs)that interact with the microRNAs involved in fruit senescence,while one and two ceRNAs were involved in fruit senescence under high-and low-temperature conditions,respectively.A dual-luciferase assay showed that the interaction of an lncRNA with a microRNA disrupts the action of the microRNA on the expression of its target mRNA(s).Furthermore,four alternative splicing-derived lncRNAs interacted with miR172i homologies(Novel_88 and Novel_69)to relieve the repressed expression of their target and produce an miR172i precursor.Correlation analysis of microRNA expression suggested that Novel_69 is likely involved in the cleavage of the pre-miR172i hairpin to generate mature miR172i.Taken together,lncRNAs are involved in pear fruit senescence under high-or low-temperature conditions through ceRNAs and the production of microRNA.展开更多
The hot compression test of 6063 Al alloy was performed on a Gleeble-1500 thermo-simulation machine, and the forming of 6063 rod cxtrudate in low-temperature high-speed extrusion was simulated with extrusion ratio of ...The hot compression test of 6063 Al alloy was performed on a Gleeble-1500 thermo-simulation machine, and the forming of 6063 rod cxtrudate in low-temperature high-speed extrusion was simulated with extrusion ratio of 25 on the platform of DEFORM 2D successfully. From the compression experimental results, the flow stress model of this Al alloy is obtained which could be the constitutive equation in the simulation of low-temperature high-speed extrusion process. From the numerical simulation results, there is a higher strain concentration at the entrance of the die and the exit temperature reaches up to 522 ℃ in low-temperature high-speed extrusion, which approaches to the quenching temperature of the 6063 Al alloy. The results show that the low-temperature high-speed extrusion method as a promsing one can reduce energy consumption effectively.展开更多
Low-temperature ausforming(LT-AF)prior to bainitic transformation leads to a noticeable acceleration of bainitic transformation kinetics;however,the effect of LT-AF on the retained austenite(RA)features and the result...Low-temperature ausforming(LT-AF)prior to bainitic transformation leads to a noticeable acceleration of bainitic transformation kinetics;however,the effect of LT-AF on the retained austenite(RA)features and the resulting mechanical properties is still unclear.LT-AF was applied to ultrahigh-strength bainitic steel before austempering.The deformation behavior and the resulting dislocation substructures were investigated by thermomechanical simulator and transmission electron microscopy(TEM).The planar dislocation structures produced during deformation at 350℃ accelerate the bainitic transformation kinetics during isothermal holding.The effect of LT-AF on the bainitic transformation kinetics and the features of RA was elucidated via dilatometer measurement,TEM,scanning electron microscopy,and X-ray diffraction.It is observed that LT-AF not only retains more RA content but also facilitates improved RA stability.This trend is mainly due to the large amounts of planar dislocations in RA and bainitic laths inherited from undercooled austenite caused by LT-AF,the decrease in bainitic sheaves size,and the increase in filmy RA content compared to the sample without ausforming.A large fraction of filmy RA with high stability and the refinement of bainitic sheaves obtained by LT-AF remarkably enhance the strain hardening capacity and achieve significantly better ductility compared to the directly austempered sample.展开更多
Aqueous zinc metal batteries(ZMBs)which are environmentally benign and cheap can be used for grid-scale energy storage,but have a short cycling life mainly due to the poor reversibility of zinc metal anodes in mild aq...Aqueous zinc metal batteries(ZMBs)which are environmentally benign and cheap can be used for grid-scale energy storage,but have a short cycling life mainly due to the poor reversibility of zinc metal anodes in mild aqueous electrolytes.A zincophilic carbon(ZC)layer was deposited on a Zn metal foil at 450°C by the up-stream pyrolysis of a hydrogen-bonded supramolecular substance framework,as-sembled from melamine(ME)and cyanuric acid(CA).The zincophilic groups(C=O and C=N)in the ZC layer guide uniform zinc plating/stripping and eliminate dendrites and side reactions.so that assembled symmetrical batteries(ZC@Zn//ZC@Zn)have a long-term service life of 2500 h at 1 mA cm^(−2) and 1 mAh cm^(−2),which is much longer than that of bare Zn anodes(180 h).In addition,ZC@Zn//V2O5 full batteries have a higher capacity of 174 mAh g^(−1) after 1200 cycles at 2 A g^(−1) than a Zn//V_(2)O_(5) counterpart(100 mAh g^(−1)).The strategy developed for the low-temperat-ure deposition of the ZC layer is a new way to construct advanced zinc metal anodes for ZMBs.展开更多
Electrochemical metallurgy at low temperature(<473 K)shows promise for the extraction and refinement of metals and alloys in a green and sustainable manner.However,the kinetics of the electrodeposition process is g...Electrochemical metallurgy at low temperature(<473 K)shows promise for the extraction and refinement of metals and alloys in a green and sustainable manner.However,the kinetics of the electrodeposition process is generally slow at low temperature,resulting in large overpotential and low current efficiency.Thus,the application of external physical fields has emerged as an effective strategy for improving the mass and charge transfer processes during electrochemical reactions.This review highlights the challenges associated with low-temperature electrochemical processes and briefly discusses recent achievements in optimizing electrodeposition processes through the use of external physical fields.The regulating effects on the optimization of the electrodeposition process and the strategies for select-ing various external physical fields,including magnetic,supergravity,and ultrasonic fields are summarized from the perspectives of equipment and mechanisms.Finally,advanced methods for in-situ characterization of external physical field-assisted electrodeposition processes are reviewed to gain a deeper understanding of metallic electrodeposition.An in-depth exploration of the mechanism by which external physical fields affect the electrode process is essential for enhancing the efficiency of metal extraction at low temperatures.展开更多
Maize(Zea mays L.),a globally significant cereal crop,is produced in vast quantities worldwide.However,its growth is severely constrained by low temperatures,particularly during seed germination,which significantly im...Maize(Zea mays L.),a globally significant cereal crop,is produced in vast quantities worldwide.However,its growth is severely constrained by low temperatures,particularly during seed germination,which significantly impairs seedling emergence.In this study,genetic diversity across six germination-associated phenotypic traits(RGR,RSL,RTL,RRSA,RRV,and RSVI)of 304 inbred lines was analyzed,to evaluate the capacity of these lines for low-temperature tolerance.Genome-wide association study(GWAS)was carried out by combining six germination-associated phenotypic traits and genotypic data from 30-fold resequencing.The gene ZmBARK1 was identified through integrated GWAS and RNA-seq analyses,and its association with low-temperature tolerance during maize germination was validated by quantitative real-time PCR(qRT-PCR).ZmBARK1,encoding BRASSINOSTEROID INSENSITIVE 1-associated receptor kinase 1,was located on the bin 4.09 region of maize chromosome 4.Amino acid comparison and subcellular localization analyses revealed that ZmBARK1 is highly homologous to AtBAK1 and is localized to the plasma membrane of the cell,which may be involved in regulating brassinosteroid(BR)signaling.In addition,we revealed the role of ZmBARK1 in low-temperature tolerance during maize germination.Compared with wild-type(WT),the ethyl methanesulfonate(EMS)mutant zmbark1 was characterized by substantially enhanced low-temperature tolerance.Overall,these findings provide promising candidate genes,improve low-temperature tolerance in maize,and advance the understanding of regulatory mechanisms underlying maize's response to low-temperature stress.展开更多
Magnesium alloys are widely used in aerospace and automotive industries due to their lightweight.However,their poor fatigue performance limits the broader application,especially in dynamic stress environments.This stu...Magnesium alloys are widely used in aerospace and automotive industries due to their lightweight.However,their poor fatigue performance limits the broader application,especially in dynamic stress environments.This study explores novel coupled pretreatments of free-end largeangle pre-torsion and low-temperature aging to improve the fatigue resistance of rolled ZK60 magnesium alloy.STA(pre-torsion followed by low-temperature aging)and SAT(low-temperature aging followed by pre-torsion)samples were prepared to investigate the influences of pretreatment coupling sequences.The results of microstructure characterization reveal that pre-torsion significantly enhances the formation of tensile twins and introduces a gradient microstructure with increased dislocation density from the center to the edges.STA process resulted in the highest twinning area fraction of 35.2% and a kernel average misorientation of 0.94 at the edge.Mechanical testing demonstrated that the coupled pre-treatment obtained a better combination of strength and plasticity,significantly improved the yield strength in the compression stage,and increased the tensile-compressive yield ratio to>0.9.In the low-cycle fatigue test,the STA samples exhibited lower cyclic mean stress,a smaller cyclic hardening trend,and better hysteretic symmetry,leading to an improvement in fatigue life of up to 256%.The findings suggest that the combined pre-torsion and low-temperature aging treatments offer a promising approach to enhance the mechanical properties and fatigue resistance of ZK60 magnesium alloy,making it suitable for structural applications in demanding environments.展开更多
Abscisic acid(ABA)plays a key role in promoting the growth and development of plants,as well as mediating the responses of plants to adverse environmental conditions.Here,we measured the photosynthetic capacity of wil...Abscisic acid(ABA)plays a key role in promoting the growth and development of plants,as well as mediating the responses of plants to adverse environmental conditions.Here,we measured the photosynthetic capacity of wild-type RR,mutant sitiens(sit),and ABA-pretreated sit tomato seedlings following exposure to low-temperature(LT)stress.We found that the net photosynthetic rate,intercellular carbon dioxide concentration,transpiration rate,and stomatal conductance of sit seedlings were lower than those of RR seedlings under LT stress.The chloroplast width,area,and number of osmiophilic granules were significantly larger in sit seedlings than in RR seedlings,while the chloroplast length/width ratio was significantly lower in sit seedlings than in RR seedlings.The photochemical activity of sit seedlings was lower,and the expression of photosynthesis-related genes in sit seedlings was altered following exposure to LT stress.ABA pretreatment significantly alleviated the above phenomenon.We also conducted an RNA sequencing analysis and characterized the expression patterns of genes in tomato seedlings following exposure to LT stress.We constructed 15 cDNA libraries and identified several differentially expressed genes involved in photosynthesis,plant hormone signaling transduction,and primary and secondary metabolism.Additional analyses of genes encoding transcription factors and proteins involved in photosynthesis-related processes showed pronounced changes in expression under LT stress.Luciferase reporter assay and electrophoretic mobility shift assay revealed that WRKY22 regulates the expression of PsbA.The PSII of WRKY22 and PsbA-silenced plants was inhibited.Our findings indicate that ABA plays a role in regulating the process of photosynthesis and protecting PSII in tomato under LT stress through the WRKY22-PsbA complex.展开更多
The low-temperature spray drying technology was developed to process instant berry powder with high efficiency and higher anthocyanin retention.The maltodextrin,whey protein and inulin were selected as additives for i...The low-temperature spray drying technology was developed to process instant berry powder with high efficiency and higher anthocyanin retention.The maltodextrin,whey protein and inulin were selected as additives for instant properties formation in berry powder.The effects of inlet air temperature(40℃–80℃),vacuum degree(0.02–0.06 MPa)and additive amount on the physicochemical properties of berry powder were analyzed through solubility,anthocyanin retention and powder yield,based on moisture content and microstructure.The findings indicated that adding maltodextrin to berry enhanced the powder yield and instant solubility.Whey protein,as an additive,provided effective protection for the anthocyanins of berry powder,and the addition less than 10 g·100^(-1) g improved the powder yield.Inulin,as an additive,reduced moisture content of berry powder,which was conducive to the higher anthocyanin retention and solubility.Technique for order preference by similarity to ideal solution(TOPSIS)analysis was conducted to optimize the spray drying parameters for anthocyanin protection and solubility.The addition of 100%maltodextrin enhanced anthocyanin protection and solubility,while maintaining the desired moisture content and powder yield.This approach was used to evaluate the comprehensive quality of berry powder.This research can provide technical guidance for producing berry powder under low-temperature spray drying.展开更多
The occurrence of tetragonal to monoclinic phase(t→m)transformation in zirconia ceramics under humid ambient conditions induces the low-temperature degradation(LTD).Such t→m transformation could be suppressed by gra...The occurrence of tetragonal to monoclinic phase(t→m)transformation in zirconia ceramics under humid ambient conditions induces the low-temperature degradation(LTD).Such t→m transformation could be suppressed by grain size refinement or/and doping small amounts of alumina.Fine-grained dense 3mol%yttria-doped tetragonal zirconia polycrystal(3Y-TZP)ceramics were prepared by pressureless sintering a zirconia powder doped with 0.25wt%alumina.The LTD behaviors of as-prepared 3Y-TZP ceramics were evaluated by accelerated aging at 134℃in water.The samples sintered at 1300℃for 2 h achieve the relative density higher than 99.9%with the average grain size of 147 nm.The 3Y-TZP ceramic exhibits excellent LTD resistance that no t→m transformation takes place after 125 h accelerated aging.Large amounts of defects were observed inside grains evidenced by the high-resolution transmission electron microscopic(HRTEM)analysis.It is proposed that the presence of defects enhances the sintering kinetics and favors the present low-temperature densification.Possible reasons for defects formation were discussed and the mechanical properties of the 3Y-TZP ceramic were reported as well.展开更多
Low-temperature lithium sulfur(Li-S)batteries have attracted increasing attention,but lithium polysulfide(LiPSs)clu stering and tardy ionic mobility have been challenging issues,which could be exacerbated under high s...Low-temperature lithium sulfur(Li-S)batteries have attracted increasing attention,but lithium polysulfide(LiPSs)clu stering and tardy ionic mobility have been challenging issues,which could be exacerbated under high sulfur loading and lean electrolyte.The distinct behaviors of sulfur cathode in lowtemperature Li-S batteries call for special regulations of the sulfur host to improve the electrochemical performances.Here,a three-dimensional Ti_(3)C_(2)micro-cage(TCC)with an interfacial structure modulated by rich curvatures has been fabricated to propel the sulfur electrochemistry at subzero temperatures.Spectroscopic/microscopic analyses and theoretical calculations elucidate that the precipitation of ultrafine Ti-metal particles on the in-situ generated Ti_(3)C_(2)nanoribbons could trigger the self-scrolling of Ti_(3)C_(2)nanoribbons into TCC.Moreover,in-situ ultraviolet-visible spectra collected at low temperature and theoretical calculations verified that the TCC regulated by rich curvatures have effectively alleviated the Li+dissociation barrier,reduced the energy barrier for charge transfer at the electrode-electrolyte interface,and restrained the clustering and shuttling of LiPSs,thus accelerating the electrochemical conversion kinetics of sulfur species at low temperatures.The performances of the carbon-free TCC-S cathode at low temperatures have been also compared from the aspects of cathode configuration and measurement condition,to demonstrate the potential of TCC.This work can not only provide new methodology for regulating the interfacial structure of MXene to enrich the materials library for low-temperature Li-S batteries,but also expand understanding about the role of interfacial structure of sulfur host in Li-S batteries.展开更多
The morphology,crystal structure,and electrochemical performance of spent LiFePO_(4)(S-LFP)are recovered by one-step low-temperature solid phase sintering.After sintering at 550℃ for 3 h,the secondary particle size d...The morphology,crystal structure,and electrochemical performance of spent LiFePO_(4)(S-LFP)are recovered by one-step low-temperature solid phase sintering.After sintering at 550℃ for 3 h,the secondary particle size distribution of regenerated LiFePO4(R-LFP)becomes narrower,and the D_(50) is reduced from 5.6 to 2.3μm.In addition,the content of Li-Fe antisite defect is reduced from 5.73%to 1.20%,and the F is doped to O(2)site in the structure of R-LFP.Moreover,a coating layer comprising carbon and LiF is formed on the surface of R-LFP because of the decomposition of PVDF.Therefore,the R-LFP demonstrates exceptional Li+diffusion dynamics and conductivity,which delivers a high discharge capacity of 157.3 mA·h/g at 0.1C.And it maintains 92%of its initial capacity after 500 cycles at 1C.展开更多
基金National Natural Science Foundation of China(11775059)National Key Technology R&D Program of China(2019YFF0301600).
文摘As an invisible“endocrine organ”,gut microbiota is widely involved in the regulation of nervous system,endocrine system,circulatory system,and digestive system.It is also closely related to host health and the occurrence of many chronic diseases.Relevant literature shows that high temperature,low temperature,and highaltitude hypoxia may have negative effects on commensal microorganisms.The stimulation of exercise may aggravate this reaction,which is related to the occurrence of exercise-induced fever and gastrointestinal and respiratory diseases.The intervention of probiotics can alleviate the above problems to a certain extent.Therefore,this paper takes exercise in a special environment as the starting point,deeply analyses the intervention effect and potential mechanism of probiotics,and provides the theoretical basis and reference for follow-up research and application of probiotics in sports science.
基金the financial support from the Key Project of Shaanxi Provincial Natural Science Foundation-Key Project of Laboratory(2025SYS-SYSZD-117)the Natural Science Basic Research Program of Shaanxi(2025JCYBQN-125)+8 种基金Young Talent Fund of Xi'an Association for Science and Technology(0959202513002)the Key Industrial Chain Technology Research Program of Xi'an(24ZDCYJSGG0048)the Key Research and Development Program of Xianyang(L2023-ZDYF-SF-077)Postdoctoral Fellowship Program of CPSF(GZC20241442)Shaanxi Postdoctoral Science Foundation(2024BSHSDZZ070)Research Funds for the Interdisciplinary Projects,CHU(300104240913)the Fundamental Research Funds for the Central Universities,CHU(300102385739,300102384201,300102384103)the Scientific Innovation Practice Project of Postgraduate of Chang'an University(300103725063)the financial support from the Australian Research Council。
文摘Lithium-ion batteries(LIBs),while dominant in energy storage due to high energy density and cycling stability,suffer from severe capacity decay,rate capability degradation,and lithium dendrite formation under low-temperature(LT)operation.Therefore,a more comprehensive and systematic understanding of LIB behavior at LT is urgently required.This review article comprehensively reviews recent advancements in electrolyte engineering strategies aimed at improving the low-temperature operational capabilities of LIBs.The study methodically examines critical performance-limiting mechanisms through fundamental analysis of four primary challenges:insufficient ionic conductivity under cryogenic conditions,kinetically hindered charge transfer processes,Li+transport limitations across the solidelectrolyte interphase(SEI),and uncontrolled lithium dendrite growth.The work elaborates on innovative optimization approaches encompassing lithium salt molecular design with tailored dissociation characteristics,solvent matrix optimization through dielectric constant and viscosity regulation,interfacial engineering additives for constructing low-impedance SEI layers,and gel-polymer composite electrolyte systems.Notably,particular emphasis is placed on emerging machine learning-guided electrolyte formulation strategies that enable high-throughput virtual screening of constituent combinations and prediction of structure-property relationships.These artificial intelligence-assisted rational design frameworks demonstrate significant potential for accelerating the development of next-generation LT electrolytes by establishing quantitative composition-performance correlations through advanced data-driven methodologies.
基金financially supported by the National Natural Science Foundation of China(No.22309067)the Open Project Program of the State Key Laboratory of Materials-Oriented Chemical Engineering,China(No.KL21-05)the Marine Equipment and Technology Institute,Jiangsu University of Science and Technology,China(No.XTCX202404)。
文摘This study focused on improving the cathode performance of Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.15)O_(3-δ)(BSCN)-based perovskite materials through molybdenum(Mo)doping.Pure BSCN and Mo-modified-BSCN—Ea_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.1)Mo_(0.05)O_(3-δ)(B S CNM_(0.05)),Ba_(0.6)Sr_(0.4)Co_(0.85)Nb_(0.05)Mo_(0.1)O_(3-δ)(BSCNM_(0.1)),and Ba_(0.6)Sr_(0.4)Co_(0.85)Mo_(0.15)O_(3-δ)(BSCM)—with Mo doping contents of 5mol%,10mol%,and15mol%,respectively,were successfully prepared using the sol-gel method.The effects of Mo doping on the crystal structure,conductivity,thermal expansion coefficient,oxygen reduction reaction(ORR)activity,and electrochemical performance were systematically evaluated using X-ray diffraction analysis,thermally induced characterization,electrochemical impedance spectroscopy,and single-cell performance tests.The results revealed that Mo doping could improve the conductivity of the materials,suppress their thermal expansion effects,and significantly improve the electrochemical performance.Surface chemical state analysis using X-ray photoelectron spectroscopy revealed that 5mol%Mo doping could facilitate a high adsorbed oxygen concentration leading to enhanced ORR activity in the materials.Density functional theory calculations confirmed that Mo doping promoted the ORR activity in the materials.At an operating temperature of 600℃,the BSCNM_(0.05)cathode material exhibited significantly enhanced electrochemical impedance characteristics,with a reduced area specific resistance of 0.048Ω·cm~2,which was lower than that of the undoped BSCN matrix material by 32.39%.At the same operating temperature,an anode-supported single cell using a BSCNM_(0.05)cathode achieved a peak power density of 1477 mW·cm^(-2),which was 30.71%,56.30%,and 171.50%higher than those of BSCN,BSCNM_(0.1),and B SCM,respectively.The improved ORR activity and electrochemical performance of BSCNM_(0.05)indicate that it can be used as a cathode material in low-temperature solid oxide fuel cells.
文摘The poor oxidation stability of ether-based solvents has long been a major challenge limiting their practical application.To enhance the oxidative stability of ether-based electrolytes,the physicochemical properties of various glycol dimethyl ethers are screened,and diglyme(G2)is selected as the sole solvent for the electrolyte.Lithium bis(fluorosulfonyl)imide(LiFSI),a highly dissociative salt,is used as the primary salt;while lithium nitrate(LiNO_(3))and lithium difluorophosphate(LiDFP),which have small ionic sizes and strong binding energies,are added as secondary salts.The resulting electrolyte can modulate the electric double layer structure by NO_(3)^(-) and DFP^(-) on the cathode side,leading to an increased Liþconcentration that is originally repelled by the cathode.Additionally,the oxidation stability of the electrolyte is improved and the formed electrode-electrolyte interphase is more uniform and stable,thereby enhancing the electrochemical performance of the cells.As a result,cells assembled with a total of 1 M ternary lithium salts in G2 solvent can operate at high voltage of 4.4 V.The LijjNCM811 cells maintain 80.2%capacity retention after 270 cycles at room temperature,with an average Coulombic efficiency of 99.5%,and exhibit 88.4%capacity retention after 200 cycles at -30℃.
基金Key R&D Program of the Xinjiang Uygur Autonomous Region,China(No.2024B01011)。
文摘Polyethylene terephthalate(PET)fibers are the largest category of chemical fibers and are widely used.However,the dyeing of PET fibers requires high temperature and pressure(130℃and 0.2 MPa),and the dyeing process consumes huge amounts of energy.Existing studies have shown that the dyeing ability of PET is directly related to the size of the amorphous region,which determines the external conditions for dyeing.In this research,we synthesized a series of low-temperature easydyeing masterbatches,PET-co-polyethylene glycol(PETEG),using polyethylene glycol(PEG)with different number-average molecular masses Mn and additive amounts.The phase domain size of the amorphous region of PET fibers was regulated via the masterbatch method.The relationship between the phase domain size and dyeing performance was explored from three perspectives:the amount of masterbatch,type of masterbatch,and PEG relative molecular mass.The results indicate that the fiber sample with PEG(Mn=2000 g/mol)at a mass fraction of 20%modified masterbatch has a smaller crystalline lamellar thickness(5.59 nm)and a larger interlamellar amorphous layer thickness(6.43 nm).The increase in the long period and lamellar inclination angle results in a looser structure,allowing small molecule dyes to diffuse into the fibers more easily.The dye-uptake increases from 63.21%to 92.66%at 100℃with the addition of the masterbatch.Additionally,the dye-uptake of the modified fibers increases with the relative molecular mass of PEG and the mass fraction of the masterbatch.All modified fibers achieve a staining color fastness of grade 4 or higher.This research demonstrates a simple masterbatch method that enables atmospheric pressure dyeing and provides a practical solution for efficient,low-temperature,and low-energy dyeing of PET fibers.
基金financial support from the Department of Science and Technology of Jilin Province(20240304104SF,20240304103SF)the Research and Innovation Fund of the Beihua University for the Graduate Student(Major Project 2023012)。
文摘Lithium-ion batteries are widely recognized as prime candidates for energy storage devices.Ethylene carbonate(EC)has become a critical component in conventional commercial electrolytes due to its exceptional film-forming properties and high dielectric constant.However,the elevated freezing point,high viscosity,and strong solvation energy of EC significantly hinder the transport rate of Li^(+)and the desolvation process at low temperatures.This leads to substantial capacity loss and even lithium plating on graphite anodes.Herein,we have developed an efficient electrolyte system specifically designed for lowtemperature conditions,which consists of 1.0 M lithium bis(fluorosulfonyl)imide(LiFSI)in isoxazole(IZ)with fluorobenzene(FB)as an uncoordinated solvent and fluoroethylene carbonate(FEC)as a filmforming co-solvent.This system effectively lowers the desolvation energy of Li^(+)through dipole-dipole interactions.The weak solvation capability allows more anions to enter the solvation sheath,promoting the formation of contact ion pairs(CIPs)and aggregates(AGGs)that enhance the transport rate of Li^(+)while maintaining high ionic conductivity across a broad temperature range.Moreover,the formation of inorganic-dominant interfacial phases on the graphite anode,induced by fluoroethylene carbonate,significantly enhances the kinetics of Li^(+)transport.At a low temperature of-20℃,this electrolyte system achieves an impressive reversible capacity of 200.9 mAh g^(-1)in graphite half-cell,which is nearly three times that observed with conventional EC-based electrolytes,demonstrating excellent stability throughout its operation.
基金supported by the National Natural Science Foundation of China(No.51907193,51822706,and 51777200)the Key Research Program of Frontier Sciences,CAS(No.ZDBS-LY-JSC047)the Youth Innovation Promotion Association,CAS(No.2020145)
文摘Carbon nanofiber(CNF)was widely utilized in the field of electrochemical energy storage due to its superiority of conductivity and mechanics.However,CNF was generally prepared at relatively high temperature.Herein,nitrogen-doped hard carbon nanofibers(NHCNFs)were prepared by a lowtemperature carbonization treatment assisted with electrospinning technology.Density functional theory analysis elucidates the incorporation of nitrogen heteroatoms with various chemical states into carbon matrix would significantly alter the total electronic configurations,leading to the robust adsorption and efficient diffusion of Na atoms on electrode interface.The obtained material carbonized at 600°C(NHCNF-600)presented a reversible specific capacity of 191.0 mAh g^(−1)and no capacity decay after 200 cycles at 1 A g^(−1).It was found that the sodium-intercalated degree had a correlation with the electrochemical impedance.A sodium-intercalated potential of 0.2 V was adopted to lower the electrochemical impedance.The constructed sodium-ion capacitor with activated carbon cathode and presodiated NHCNF-600 anode can present an energy power density of 82.1 Wh kg^(−1)and a power density of 7.0 kW kg^(−1).
基金support by the National Natural Science Foundation of Inner Mongolia (2022SHZR1885)Natural Science Foundation of Hebei province (E2022402101,E2022402105)。
文摘To completely recover valuable elements and reduce the amount of waste,the impact of phosphoric acid on the decomposition of rare earth,fluorine and phosphorus during cyclic leaching was studied based on the characteristics of low-tempe rature sulfuric acid deco mposition.When a single monazite was leached using 75 wt% H_(2)SO_(4) solution with phosphoric acid,the size and number of monazite particles in the washing slag gradually decrease with the increase in phosphoric acid content in the leaching solution.The monazite phase can hardly be found in the slag when the phosphoric acid content reaches 70 g/L,which indicates that phosphoric acid is favorable for monazite decomposition.The mixed rare earth concentrate was leached by 75 wt% H_(2)SO_(4) containing 70 g/L phosphoric acid,the mineral compositions of the washing slag are only gypsum and unwashed rare earth sulfuric acid.After cyclic leaching of75 wt% H_(2)SO_(4),the mineral compositions of the primary leaching washing slag are mainly undecomposed monazite,rare earth sulfate and calcium sulfate.However,monazite is not found in the mineral phase of the second and third leaching washing slag.The leaching rates of rare earth and phosphorus gradually increase with the increase in cyclic leaching times.In addition,the phosphoric acid content in the leaching solution increases with the increase in the number of cyclic leaching time.However,the rising trend decreases when the phosphoric acid content reaches 50 g/L by adsorption and crystallization of phosphoric acid.A small amount of water can be used to clean the leaching residue before washing to recover the more soluble phosphorus acid according to the difference of dissolution between phosphoric acid and rare earth sulfuric acid.
基金supported by the Fundamental Research Funds for the Central Universities(Grant No.KYYJ202116)the Jiangsu Agricultural Science and Technology Innovation Fund[Grant No.CX(20)2020]the Earmarked Fund for China Agriculture Research System(Grant No.CARS-28).
文摘Pear fruit senescence under high-and low-temperature conditions has been reported to be mediated by microRNAs.Long non-coding RNAs(lncRNAs),which can function as competing endogenous RNAs that interact with microRNAs,may also be involved in temperature-affected fruit senescence.Based on the transcriptome and microRNA sequencings,in this study,3330 lncRNAs were isolated from Pyrus pyrifolia fruit.Of these lncRNAs,2060 and 537 were responsive to high-and low-temperature conditions,respectively.Of these differentially expressed lncRNAs,82 and 24 correlated to the mRNAs involved in fruit senescence under high-and low-temperature conditions,respectively.Moreover,three lncRNAs were predicted to be competing endogenous RNAs(ceRNAs)that interact with the microRNAs involved in fruit senescence,while one and two ceRNAs were involved in fruit senescence under high-and low-temperature conditions,respectively.A dual-luciferase assay showed that the interaction of an lncRNA with a microRNA disrupts the action of the microRNA on the expression of its target mRNA(s).Furthermore,four alternative splicing-derived lncRNAs interacted with miR172i homologies(Novel_88 and Novel_69)to relieve the repressed expression of their target and produce an miR172i precursor.Correlation analysis of microRNA expression suggested that Novel_69 is likely involved in the cleavage of the pre-miR172i hairpin to generate mature miR172i.Taken together,lncRNAs are involved in pear fruit senescence under high-or low-temperature conditions through ceRNAs and the production of microRNA.
基金Project(2008A09030004) supported by the Major Science and Technology Project of Guangdong Province,ChinaProject(30815009) supported by the Foundation of State Key Laboratory of Advanced Design and Manufacture for Vehicle Body
文摘The hot compression test of 6063 Al alloy was performed on a Gleeble-1500 thermo-simulation machine, and the forming of 6063 rod cxtrudate in low-temperature high-speed extrusion was simulated with extrusion ratio of 25 on the platform of DEFORM 2D successfully. From the compression experimental results, the flow stress model of this Al alloy is obtained which could be the constitutive equation in the simulation of low-temperature high-speed extrusion process. From the numerical simulation results, there is a higher strain concentration at the entrance of the die and the exit temperature reaches up to 522 ℃ in low-temperature high-speed extrusion, which approaches to the quenching temperature of the 6063 Al alloy. The results show that the low-temperature high-speed extrusion method as a promsing one can reduce energy consumption effectively.
基金The financial support provided by the National Natural Science Foundation of China(No.U1808208)the Fundamental Research Funds for the Central Universities(N2107005)is gratefully acknowledged.
文摘Low-temperature ausforming(LT-AF)prior to bainitic transformation leads to a noticeable acceleration of bainitic transformation kinetics;however,the effect of LT-AF on the retained austenite(RA)features and the resulting mechanical properties is still unclear.LT-AF was applied to ultrahigh-strength bainitic steel before austempering.The deformation behavior and the resulting dislocation substructures were investigated by thermomechanical simulator and transmission electron microscopy(TEM).The planar dislocation structures produced during deformation at 350℃ accelerate the bainitic transformation kinetics during isothermal holding.The effect of LT-AF on the bainitic transformation kinetics and the features of RA was elucidated via dilatometer measurement,TEM,scanning electron microscopy,and X-ray diffraction.It is observed that LT-AF not only retains more RA content but also facilitates improved RA stability.This trend is mainly due to the large amounts of planar dislocations in RA and bainitic laths inherited from undercooled austenite caused by LT-AF,the decrease in bainitic sheaves size,and the increase in filmy RA content compared to the sample without ausforming.A large fraction of filmy RA with high stability and the refinement of bainitic sheaves obtained by LT-AF remarkably enhance the strain hardening capacity and achieve significantly better ductility compared to the directly austempered sample.
基金partially supported by the National Natural Science Foundation of China(22479022)Liaoning Revitalization Talents Program(XLYC2007129)。
文摘Aqueous zinc metal batteries(ZMBs)which are environmentally benign and cheap can be used for grid-scale energy storage,but have a short cycling life mainly due to the poor reversibility of zinc metal anodes in mild aqueous electrolytes.A zincophilic carbon(ZC)layer was deposited on a Zn metal foil at 450°C by the up-stream pyrolysis of a hydrogen-bonded supramolecular substance framework,as-sembled from melamine(ME)and cyanuric acid(CA).The zincophilic groups(C=O and C=N)in the ZC layer guide uniform zinc plating/stripping and eliminate dendrites and side reactions.so that assembled symmetrical batteries(ZC@Zn//ZC@Zn)have a long-term service life of 2500 h at 1 mA cm^(−2) and 1 mAh cm^(−2),which is much longer than that of bare Zn anodes(180 h).In addition,ZC@Zn//V2O5 full batteries have a higher capacity of 174 mAh g^(−1) after 1200 cycles at 2 A g^(−1) than a Zn//V_(2)O_(5) counterpart(100 mAh g^(−1)).The strategy developed for the low-temperat-ure deposition of the ZC layer is a new way to construct advanced zinc metal anodes for ZMBs.
基金supported by Southern Marine Science and Engineering Guangdong Laboratory(Zhuhai)(No.SML2023SP243)the National Key Research and Development Program of China(No.2022YFC2906100)the National Natural Science Foundation of China(No.92475202)are acknowledged.
文摘Electrochemical metallurgy at low temperature(<473 K)shows promise for the extraction and refinement of metals and alloys in a green and sustainable manner.However,the kinetics of the electrodeposition process is generally slow at low temperature,resulting in large overpotential and low current efficiency.Thus,the application of external physical fields has emerged as an effective strategy for improving the mass and charge transfer processes during electrochemical reactions.This review highlights the challenges associated with low-temperature electrochemical processes and briefly discusses recent achievements in optimizing electrodeposition processes through the use of external physical fields.The regulating effects on the optimization of the electrodeposition process and the strategies for select-ing various external physical fields,including magnetic,supergravity,and ultrasonic fields are summarized from the perspectives of equipment and mechanisms.Finally,advanced methods for in-situ characterization of external physical field-assisted electrodeposition processes are reviewed to gain a deeper understanding of metallic electrodeposition.An in-depth exploration of the mechanism by which external physical fields affect the electrode process is essential for enhancing the efficiency of metal extraction at low temperatures.
基金supported by the Key Research and Development Project of Heilongjiang Province(2022ZX02B01)the Natural Science Foundation Project of Heilongjiang Province(YQ2022C009)the Natural Science Foundation of Shandong Province(K22LB56)。
文摘Maize(Zea mays L.),a globally significant cereal crop,is produced in vast quantities worldwide.However,its growth is severely constrained by low temperatures,particularly during seed germination,which significantly impairs seedling emergence.In this study,genetic diversity across six germination-associated phenotypic traits(RGR,RSL,RTL,RRSA,RRV,and RSVI)of 304 inbred lines was analyzed,to evaluate the capacity of these lines for low-temperature tolerance.Genome-wide association study(GWAS)was carried out by combining six germination-associated phenotypic traits and genotypic data from 30-fold resequencing.The gene ZmBARK1 was identified through integrated GWAS and RNA-seq analyses,and its association with low-temperature tolerance during maize germination was validated by quantitative real-time PCR(qRT-PCR).ZmBARK1,encoding BRASSINOSTEROID INSENSITIVE 1-associated receptor kinase 1,was located on the bin 4.09 region of maize chromosome 4.Amino acid comparison and subcellular localization analyses revealed that ZmBARK1 is highly homologous to AtBAK1 and is localized to the plasma membrane of the cell,which may be involved in regulating brassinosteroid(BR)signaling.In addition,we revealed the role of ZmBARK1 in low-temperature tolerance during maize germination.Compared with wild-type(WT),the ethyl methanesulfonate(EMS)mutant zmbark1 was characterized by substantially enhanced low-temperature tolerance.Overall,these findings provide promising candidate genes,improve low-temperature tolerance in maize,and advance the understanding of regulatory mechanisms underlying maize's response to low-temperature stress.
基金sponsored by the National Natural Science Foundation of China(Nos.52175143,and 51571150).
文摘Magnesium alloys are widely used in aerospace and automotive industries due to their lightweight.However,their poor fatigue performance limits the broader application,especially in dynamic stress environments.This study explores novel coupled pretreatments of free-end largeangle pre-torsion and low-temperature aging to improve the fatigue resistance of rolled ZK60 magnesium alloy.STA(pre-torsion followed by low-temperature aging)and SAT(low-temperature aging followed by pre-torsion)samples were prepared to investigate the influences of pretreatment coupling sequences.The results of microstructure characterization reveal that pre-torsion significantly enhances the formation of tensile twins and introduces a gradient microstructure with increased dislocation density from the center to the edges.STA process resulted in the highest twinning area fraction of 35.2% and a kernel average misorientation of 0.94 at the edge.Mechanical testing demonstrated that the coupled pre-treatment obtained a better combination of strength and plasticity,significantly improved the yield strength in the compression stage,and increased the tensile-compressive yield ratio to>0.9.In the low-cycle fatigue test,the STA samples exhibited lower cyclic mean stress,a smaller cyclic hardening trend,and better hysteretic symmetry,leading to an improvement in fatigue life of up to 256%.The findings suggest that the combined pre-torsion and low-temperature aging treatments offer a promising approach to enhance the mechanical properties and fatigue resistance of ZK60 magnesium alloy,making it suitable for structural applications in demanding environments.
基金supported by the National Natural Science Foundation of China(32272791 and 32072651)the earmarked fund for CARS(CARS-23)+1 种基金the Joint Fund for Innovation Enhancement of Liaoning Province,China(2021-NLTS-11-01)the support program for Young and Middle-aged Scientific and Technological Innovation Talents,China(RC210293)。
文摘Abscisic acid(ABA)plays a key role in promoting the growth and development of plants,as well as mediating the responses of plants to adverse environmental conditions.Here,we measured the photosynthetic capacity of wild-type RR,mutant sitiens(sit),and ABA-pretreated sit tomato seedlings following exposure to low-temperature(LT)stress.We found that the net photosynthetic rate,intercellular carbon dioxide concentration,transpiration rate,and stomatal conductance of sit seedlings were lower than those of RR seedlings under LT stress.The chloroplast width,area,and number of osmiophilic granules were significantly larger in sit seedlings than in RR seedlings,while the chloroplast length/width ratio was significantly lower in sit seedlings than in RR seedlings.The photochemical activity of sit seedlings was lower,and the expression of photosynthesis-related genes in sit seedlings was altered following exposure to LT stress.ABA pretreatment significantly alleviated the above phenomenon.We also conducted an RNA sequencing analysis and characterized the expression patterns of genes in tomato seedlings following exposure to LT stress.We constructed 15 cDNA libraries and identified several differentially expressed genes involved in photosynthesis,plant hormone signaling transduction,and primary and secondary metabolism.Additional analyses of genes encoding transcription factors and proteins involved in photosynthesis-related processes showed pronounced changes in expression under LT stress.Luciferase reporter assay and electrophoretic mobility shift assay revealed that WRKY22 regulates the expression of PsbA.The PSII of WRKY22 and PsbA-silenced plants was inhibited.Our findings indicate that ABA plays a role in regulating the process of photosynthesis and protecting PSII in tomato under LT stress through the WRKY22-PsbA complex.
基金Supported by the National Natural Science Foundation of China(32072352)。
文摘The low-temperature spray drying technology was developed to process instant berry powder with high efficiency and higher anthocyanin retention.The maltodextrin,whey protein and inulin were selected as additives for instant properties formation in berry powder.The effects of inlet air temperature(40℃–80℃),vacuum degree(0.02–0.06 MPa)and additive amount on the physicochemical properties of berry powder were analyzed through solubility,anthocyanin retention and powder yield,based on moisture content and microstructure.The findings indicated that adding maltodextrin to berry enhanced the powder yield and instant solubility.Whey protein,as an additive,provided effective protection for the anthocyanins of berry powder,and the addition less than 10 g·100^(-1) g improved the powder yield.Inulin,as an additive,reduced moisture content of berry powder,which was conducive to the higher anthocyanin retention and solubility.Technique for order preference by similarity to ideal solution(TOPSIS)analysis was conducted to optimize the spray drying parameters for anthocyanin protection and solubility.The addition of 100%maltodextrin enhanced anthocyanin protection and solubility,while maintaining the desired moisture content and powder yield.This approach was used to evaluate the comprehensive quality of berry powder.This research can provide technical guidance for producing berry powder under low-temperature spray drying.
基金financially supported by the Foundation of Hubei Province Key Laboratory of Green Materials for Light Industry,Hubei University of Technology。
文摘The occurrence of tetragonal to monoclinic phase(t→m)transformation in zirconia ceramics under humid ambient conditions induces the low-temperature degradation(LTD).Such t→m transformation could be suppressed by grain size refinement or/and doping small amounts of alumina.Fine-grained dense 3mol%yttria-doped tetragonal zirconia polycrystal(3Y-TZP)ceramics were prepared by pressureless sintering a zirconia powder doped with 0.25wt%alumina.The LTD behaviors of as-prepared 3Y-TZP ceramics were evaluated by accelerated aging at 134℃in water.The samples sintered at 1300℃for 2 h achieve the relative density higher than 99.9%with the average grain size of 147 nm.The 3Y-TZP ceramic exhibits excellent LTD resistance that no t→m transformation takes place after 125 h accelerated aging.Large amounts of defects were observed inside grains evidenced by the high-resolution transmission electron microscopic(HRTEM)analysis.It is proposed that the presence of defects enhances the sintering kinetics and favors the present low-temperature densification.Possible reasons for defects formation were discussed and the mechanical properties of the 3Y-TZP ceramic were reported as well.
基金support from the National Natural Science Foundation of China for financial support(22175054)the Distinguished Project for Scientific Research in Universities of Anhui Province(2024AH020011)+2 种基金the Key Project for Cultivation of Outstanding Young Scholars in Universities of Anhui Province(YQZD2024015)the Key Project of Provincial Natural Science Research Foundation of Anhui Universities,China(No.2022AH050406)the Anhui Province Research Funding for Outstanding Young Talents in Colleges and Universities,China(No.gxyq2022021)。
文摘Low-temperature lithium sulfur(Li-S)batteries have attracted increasing attention,but lithium polysulfide(LiPSs)clu stering and tardy ionic mobility have been challenging issues,which could be exacerbated under high sulfur loading and lean electrolyte.The distinct behaviors of sulfur cathode in lowtemperature Li-S batteries call for special regulations of the sulfur host to improve the electrochemical performances.Here,a three-dimensional Ti_(3)C_(2)micro-cage(TCC)with an interfacial structure modulated by rich curvatures has been fabricated to propel the sulfur electrochemistry at subzero temperatures.Spectroscopic/microscopic analyses and theoretical calculations elucidate that the precipitation of ultrafine Ti-metal particles on the in-situ generated Ti_(3)C_(2)nanoribbons could trigger the self-scrolling of Ti_(3)C_(2)nanoribbons into TCC.Moreover,in-situ ultraviolet-visible spectra collected at low temperature and theoretical calculations verified that the TCC regulated by rich curvatures have effectively alleviated the Li+dissociation barrier,reduced the energy barrier for charge transfer at the electrode-electrolyte interface,and restrained the clustering and shuttling of LiPSs,thus accelerating the electrochemical conversion kinetics of sulfur species at low temperatures.The performances of the carbon-free TCC-S cathode at low temperatures have been also compared from the aspects of cathode configuration and measurement condition,to demonstrate the potential of TCC.This work can not only provide new methodology for regulating the interfacial structure of MXene to enrich the materials library for low-temperature Li-S batteries,but also expand understanding about the role of interfacial structure of sulfur host in Li-S batteries.
基金supported by the National Natural Science Foundation of China(Nos.51874360,51974370,52074360,52122407,52174285)the Innovation and Entrepreneurship Project of Hunan Province,China(No.2020GK4051)+1 种基金the Key R&D Program of Yunan Province,China(No.202103AA080019)the Natural Science Foundation for Distinguished Young Scholars of Hunan Province,China(No.2024JJ2077)。
文摘The morphology,crystal structure,and electrochemical performance of spent LiFePO_(4)(S-LFP)are recovered by one-step low-temperature solid phase sintering.After sintering at 550℃ for 3 h,the secondary particle size distribution of regenerated LiFePO4(R-LFP)becomes narrower,and the D_(50) is reduced from 5.6 to 2.3μm.In addition,the content of Li-Fe antisite defect is reduced from 5.73%to 1.20%,and the F is doped to O(2)site in the structure of R-LFP.Moreover,a coating layer comprising carbon and LiF is formed on the surface of R-LFP because of the decomposition of PVDF.Therefore,the R-LFP demonstrates exceptional Li+diffusion dynamics and conductivity,which delivers a high discharge capacity of 157.3 mA·h/g at 0.1C.And it maintains 92%of its initial capacity after 500 cycles at 1C.
