The application status of friction stir welding technology is introduced,and the application research of advanced FSW technology in the manufacture of high-speed electric multiple unit aluminum alloy body is analyzed,...The application status of friction stir welding technology is introduced,and the application research of advanced FSW technology in the manufacture of high-speed electric multiple unit aluminum alloy body is analyzed,including the application of traditional friction stir welding technology to a combination of a lap joint and butt joint,and butt joint of large thick plate by both sides process,also introduces bobbin-tool friction stir welding to a butt joint and three-dimensional space curved friction stir welding to T-joint. At the same time the future development trend of new FSW technology derived from traditional FSW technology in rail vehicle manufacturing industry is put forward. As the fast developing of critical technology used on railway vehicles,quick applying advanced welding technology will affect products quality,manufacturing cost and production cycle time directly,and it certainly will be one of the approaches to develop markets by all the railway vehicles manufacturing enterprises.展开更多
The wheel-rail adhesion control for regenerative braking systems of high speed electric multiple unit trains is crucial to maintaining the stability,improving the adhesion utilization,and achieving deep energy recover...The wheel-rail adhesion control for regenerative braking systems of high speed electric multiple unit trains is crucial to maintaining the stability,improving the adhesion utilization,and achieving deep energy recovery.There remain technical challenges mainly because of the nonlinear,uncertain,and varying features of wheel-rail contact conditions.This research analyzes the torque transmitting behavior during regenerative braking,and proposes a novel methodology to detect the wheel-rail adhesion stability.Then,applications to the wheel slip prevention during braking are investigated,and the optimal slip ratio control scheme is proposed,which is based on a novel optimal reference generation of the slip ratio and a robust sliding mode control.The proposed methodology achieves the optimal braking performancewithoutthewheel-railcontactinformation.Numerical simulation results for uncertain slippery rails verify the effectiveness of the proposed methodology.展开更多
When the operation speed of the high-speed train increases and the weight of the carbody becomes lighter,not only does the sensitivity of the wheel/rail contact get higher,but also the vibration frequency range of the...When the operation speed of the high-speed train increases and the weight of the carbody becomes lighter,not only does the sensitivity of the wheel/rail contact get higher,but also the vibration frequency range of the vehicle system gets enlarged and more frequencies are transmitted from the wheelset to the carbody.It is important to investigate the vibration characteristics and the dynamic frequency transmission from the wheel/rail interface to the carbody of the high-speed electric multi-uint（EMU）.An elastic highspeed vehicle dynamics model is established in which the carbody,bogieframes,and wheelsets are all dealt with as flexible body.A rigid high-speed vehicle dynamics model is set up to compare with the simulation results of the elastic model.In the rigid vehicle model,the carbody,bogieframes and wheelsets are treated as rigid component while the suspension and structure parameters are the same as used in the elastic model.The dynamic characteristic of the elastic high speed vehicle is investigated in time and frequency domains and the di ff erence of the acceleration,frequency distribution and transmission of the two types of models are presented.The results show that the spectrum power density of the vehicle decreases from the wheelset to the carbody and the acceleration transmission ratio is approximately from 1%to 10%for each suspension system.The frequency of the wheelset rotation is evident in the vibration of the flexible model and is transmitted from the wheelset to the bogieframe and to thecarbody.The results of the flexible model are more reasonable than that of the rigid model.A field test data of the high speed train are presented to verify the simulation results.It shows that the simulation results are coincident with the field test data.展开更多
Due to the coexistence of compressibility,viscosity,and threedimensional effects,laminar flow is difficult to maintain for high-speed boundary layer on complex geometries.The unstable disturbance waves in the boundary...Due to the coexistence of compressibility,viscosity,and threedimensional effects,laminar flow is difficult to maintain for high-speed boundary layer on complex geometries.The unstable disturbance waves in the boundary layer are excited and rapidly increase during the receptivity process,so sufficiently large Reynolds stress causes the basic flow velocity profile to change,and the formation of turbulence is inevitable.展开更多
High speed railway technologies are rapidly development in the world.The total distance of the high speed railway is more than 40,000 kilometers in China,and many types of high speed Electrical Multi-Units(EMUs)are op...High speed railway technologies are rapidly development in the world.The total distance of the high speed railway is more than 40,000 kilometers in China,and many types of high speed Electrical Multi-Units(EMUs)are operated.The top operation velocity of the train reaches 350 km/h.New science and technologies are developing rapidly.New generation technologies such as the information technology,intelligent manufacturing,new material and processing,innovating design philosophy have revolutionary influence on the high speed train.It promotes the high speed train performance such as intelligence,reliable operation and environment-friendly.Based on many years investigation of the trend of the technology development and requirement of general public,the trend of technology development in five aspects are presented in this paper.The five aspects include economic applicability,high speed and high efficiency,green and low carbon,intelligent safety,comfortable and high quality.展开更多
High-speed railway holds a pivotal position in China's transportation system,closely intertwined with the production and daily lives of people.It serves as a critical carrier for fostering a new development paradi...High-speed railway holds a pivotal position in China's transportation system,closely intertwined with the production and daily lives of people.It serves as a critical carrier for fostering a new development paradigm,supporting high-quality growth,and building a modernized strong nation.Up to 2025,the high-speed railway operating mileage in China has exceeded 50000 km,ranking the first in the world and surpassing the combined total of high-speed railway operating mileage in all other countries.展开更多
The finite element software was used to simulate the hot rolling finishing process,and the distribution of force,heat and velocity in the deformation zone was analyzed.Based on the high temperature friction and wear t...The finite element software was used to simulate the hot rolling finishing process,and the distribution of force,heat and velocity in the deformation zone was analyzed.Based on the high temperature friction and wear tester,the friction process of high speed steel(HSS)roll and strip during hot rolling was simulated.The results show that the process can be divided into three stages based on the observed changes in the friction coefficient throughout the rolling process.In the initial state,owing to the instability of the rolling process,the friction coefficient rapidly attains its maximum value within a brief interval and subsequently declines rapidly.Subsequently,the friction coefficient undergoes a gradual increase due to the formation of finer oxide layer particles during the growth period.Ultimately,the friction coefficient will be maintained at a stable value between 0.34 and 0.37.At this time,the HSS roll matrix mainly contains MC,M_(2)C and M_(6)C carbides.Additionally,the surface oxide layer particles become larger and more densely distributed,which can inhibit the wear of HSS rolls to a certain extent.展开更多
The pantograph area is a critical source of aerodynamic noise in high-speed trains,generating noise both directly and through its cavity,a factor that warrants considerable attention.One effective method for reducing ...The pantograph area is a critical source of aerodynamic noise in high-speed trains,generating noise both directly and through its cavity,a factor that warrants considerable attention.One effective method for reducing aerodynamic noise within the pantograph cavity involves the introduction of a jet at the leading edge of the cavity.This study investigates the mechanisms driving cavity aerodynamic noise under varying jet velocities,using Improved Delayed Detached Eddy Simulation(IDDES)and Ffowcs Williams-Hawkings(FW-H)equations.The numerical simulations reveal that an increase in jet velocity results in a higher elevation of the shear layer above the cavity.This elevation,in turn,diminishes the interaction area between the vortices produced by jet shedding and the trailing edge of the cavity wall.Consequently,the amplitude of pressure pulsations on the cavity surface is reduced,leading to a decrease in radiated far-field noise.Specifically,simulations conducted with a jet velocity of 111.11 m/s indicate a remarkable noise reduction of approximately 4 dB attributable to this mechanism.To further enhance noise mitigation,alterations to the inclination angles of the cavity’s front and rear walls are also explored.The findings demonstrate that,at a constant jet velocity,such modifications significantly diminish pressure pulsations at the intersection of the rear wall and cavity floor,optimizing overall noise reduction and achieving a maximum reduction of approximately 6 dB.展开更多
The noise generated by high-speed hair dryers significantly affects user experience,with aerodynamic design playing a crucial role in controlling sound emissions.This study investigates the aerodynamic noise character...The noise generated by high-speed hair dryers significantly affects user experience,with aerodynamic design playing a crucial role in controlling sound emissions.This study investigates the aerodynamic noise characteristics of a commercial high-speed hair dryer through Computational Fluid Dynamics(CFD)analysis.The velocity field,streamline patterns,and vector distribution within the primary flow path and internal cavity were systematically examined.Results indicate that strong interactions between the wake flow generated by the guide vanes and the straight baffle in the rear flow path induce vortex structures near the outlet,which are primarily responsible for highfrequency noise.To address this,the guide vanes and rear flow path geometry were redesigned and optimized for improved acoustic and aerodynamic performance.Underrated operating conditions(28 V,20,000 rpm),the optimized configuration achieves a noise reduction of more than 2.2 dB while increasing outlet wind speed by over 9%.Moreover,the noise suppression effect becomes more pronounced at lower rotational speeds.展开更多
1. Introduction High-speed gas-particle flows are crucial in engineering applications and natural phenomena, such as volcanic eruptions,combustion, and hypersonic flight. These flows involve complex gas-particle inter...1. Introduction High-speed gas-particle flows are crucial in engineering applications and natural phenomena, such as volcanic eruptions,combustion, and hypersonic flight. These flows involve complex gas-particle interactions, posing significant challenges for simulations and experiments. This research highlight summarizes recent advancements in gas-particle dynamics under compressible conditions, covering key findings, numerical and experimental progress, and future directions. Details can be found in the work of Capecelatro and Wagner (Gas-particle dynamics in high-speed flows. Annual Review of Fluid Mechanics 2024;56:379–403).展开更多
LEADSFON(XIAMEN)TEXTILE TECH CO.,LTD.is a manufacturer of knitting circular machines.Since 2002,the company has served as an ODM and supporting partner for the Italian brand"PILOTELLI".In 2014,LEADSFON offic...LEADSFON(XIAMEN)TEXTILE TECH CO.,LTD.is a manufacturer of knitting circular machines.Since 2002,the company has served as an ODM and supporting partner for the Italian brand"PILOTELLI".In 2014,LEADSFON officially acquired PILOTELLI,integrating advanced Italian technology into its core operations.展开更多
Safer,smarter,faster...In China,people prefer high-speed trains to flights if the journey time is under five hours.High-speed train travel is set to become even more attractive with the addition of a new member to the...Safer,smarter,faster...In China,people prefer high-speed trains to flights if the journey time is under five hours.High-speed train travel is set to become even more attractive with the addition of a new member to the high-speed train family:the CR450,the world’s fastest electric multiple unit(EMU).展开更多
Surface integrity of a new damage-tolerant titanium alloy （TC21）, including surface roughness, microhardness and metallurgical structure is investigated when normal and high speed milling are used at different tool ...Surface integrity of a new damage-tolerant titanium alloy （TC21）, including surface roughness, microhardness and metallurgical structure is investigated when normal and high speed milling are used at different tool wear status. Results show that good surface integrity of TC21 can be obtained in high speed milling. In addition, even in acutely worn stages, there is no so-called serious hardening layer （or white layer） according to the studies on microhardness and metallurgical structure.展开更多
The engineblock production lines need high speed tapping with tungsten carbide taps. In the tapping process, the machining precision and the tool life of taps are directly influenced by tapping forces. And the paramet...The engineblock production lines need high speed tapping with tungsten carbide taps. In the tapping process, the machining precision and the tool life of taps are directly influenced by tapping forces. And the parameter optimization of tap structures is also correlated with the variation of tapping forces. Therefore, the study of tapping forces is necessary in developing new style taps. Several experiments about some novel carbide taps are performed on a vertical machining center by a Kistler dynamometer system in blind tapping both gray cast iron and ductile cast iron. And the variations of tapping forces are analyzed in tapping-in and tapping-out periods. It indicates that cutting forces hardly vary with the tap wear in tapping cast iron. Contrarily, tapping forces are closely correlated with the holding method. Besides, it also depends on the helix angle, the flute numbers and the plasticity of the work material to some extent.展开更多
The influence of rare earth metals and heat treatment on the microstructure and performance of M42 steel has been investigated by means of an optical microscope OM scanning electron microscope SEM energy dispersive sp...The influence of rare earth metals and heat treatment on the microstructure and performance of M42 steel has been investigated by means of an optical microscope OM scanning electron microscope SEM energy dispersive spectroscopy EDS transmission electron microscope TEM electron back-scatter diffraction EBSD and X-ray diffraction XRD . The results show that M2 C is the prevailing type of eutectic carbides in M42 steel. After modification with rare earth metals M2 C eutectic carbides change from the ordered lamellar structure into a circular structure.Despite different morphologies the two carbides present the same characteristics of microstructure and growth orientation.Compared with lamellar carbides M2 C carbides with the circular structure are much easier to decompose and spheroidize after heating which remarkably refines the carbide dimensions.The refined carbides improve the supersaturation of alloying elements in martensite and increase the hardness of M42 steel by 1.5 HRC.展开更多
Shaped charge jet formation process is studied under the conditions of different background lights by means of high speed frame photography. In order to shoot true jet appearance, the glass tube in which jet moves is...Shaped charge jet formation process is studied under the conditions of different background lights by means of high speed frame photography. In order to shoot true jet appearance, the glass tube in which jet moves is vacuumized. The experiment results show that observing jet appearance with the double reflecting mirrors system is feasible as long as the vacuum of the glass tube can meet the requirement of experiment.展开更多
A multiplexer with a low-distortion high-bandwidth analog switch is presented. The gate-to-source voltage of the switch is set by the combined on-voltage of a pMOS and an nMOS,and the difference between its gate-sourc...A multiplexer with a low-distortion high-bandwidth analog switch is presented. The gate-to-source voltage of the switch is set by the combined on-voltage of a pMOS and an nMOS,and the difference between its gate-source voltage and the threshold voltage （VGST） is guaranteed to be constant with input variation. Thus, the body effect is nearly canceled. Implemented in a TSMC 0.18μm CMOS process, results from HSPICE simulation show that the VGST is nearly constant with an input range from 0.3 to 1.7V,and the - 3dB bandwidth is larger than 10GHz;the SFDR （spurious free dynamic range） of the output is 67. lldB with 1GHz input frequency; the turn-on time is 2.98ns,and the turn-off time is 1.35ns, which indicates a break-before-make action of the multiplexer. The proposed structure can be applied to high speed signal transmission.展开更多
Based on the theory of elastic mechanics and material mechanics, the orientation precision of the hohl schaft kegel（HSK） tooling system in static and dynamic states is theoretically and experimentally studied. The r...Based on the theory of elastic mechanics and material mechanics, the orientation precision of the hohl schaft kegel（HSK） tooling system in static and dynamic states is theoretically and experimentally studied. The relation between the clamping force and the shank taper is obtained. And a proper clamping force is found to be essential to assure the axial and radial orientation precisions of the HSK tooling system in high speed machining （HSM）. Analytical results show that the reason why the HSK tooling system can keep high precision at the high rotational speed is that the actual axial clamping force keeps the two surfaces of the shank and the spindle in contact all the time.展开更多
Serious commutation lag occurs when a Brushless DC Motor(BLDCM) operates at high speeds,and this leads to torque decline with ripple.In this paper,an advanced conduction control scheme is proposed which can accelerate...Serious commutation lag occurs when a Brushless DC Motor(BLDCM) operates at high speeds,and this leads to torque decline with ripple.In this paper,an advanced conduction control scheme is proposed which can accelerate the commutation and enhance the torque production remarkably.Besides,an on line adjusting algorithm based on the Golden Section Method is adopted to search the optimal advanced conduction angle.Simulation and experimental results verify the feasibility and effectivity of the scheme proposed.展开更多
This article deals with an experimental study on the aerodynamic characteristics of a low-drag high-speed nature laminar flow (NLF) airfoil for business airplanes in the TST27 wind tunnel at Delft University of Techno...This article deals with an experimental study on the aerodynamic characteristics of a low-drag high-speed nature laminar flow (NLF) airfoil for business airplanes in the TST27 wind tunnel at Delft University of Technology, the Netherlands. In this experiment, in an attempt to reduce the errors of measurement and improve its accuracy in high-speed flight, some nonintrusive meas- urement techniques, such as the quantitative infrared thermography (IRT), the digital particle imaging velocimetry (PIV), and the s...展开更多
基金supported by Changchun Science and Technology Innovation"Double Tenth Project"(Grant No.17SS024)Technical Development Project of CRRC Changchun Railway Vehicles Co.,Ltd(Grant No.16GCZX006)
文摘The application status of friction stir welding technology is introduced,and the application research of advanced FSW technology in the manufacture of high-speed electric multiple unit aluminum alloy body is analyzed,including the application of traditional friction stir welding technology to a combination of a lap joint and butt joint,and butt joint of large thick plate by both sides process,also introduces bobbin-tool friction stir welding to a butt joint and three-dimensional space curved friction stir welding to T-joint. At the same time the future development trend of new FSW technology derived from traditional FSW technology in rail vehicle manufacturing industry is put forward. As the fast developing of critical technology used on railway vehicles,quick applying advanced welding technology will affect products quality,manufacturing cost and production cycle time directly,and it certainly will be one of the approaches to develop markets by all the railway vehicles manufacturing enterprises.
基金supported by the National Natural Science Foundation of China(Grant 51305437)Guangdong Innovative Research Team Program of China(Grant201001D0104648280)
文摘The wheel-rail adhesion control for regenerative braking systems of high speed electric multiple unit trains is crucial to maintaining the stability,improving the adhesion utilization,and achieving deep energy recovery.There remain technical challenges mainly because of the nonlinear,uncertain,and varying features of wheel-rail contact conditions.This research analyzes the torque transmitting behavior during regenerative braking,and proposes a novel methodology to detect the wheel-rail adhesion stability.Then,applications to the wheel slip prevention during braking are investigated,and the optimal slip ratio control scheme is proposed,which is based on a novel optimal reference generation of the slip ratio and a robust sliding mode control.The proposed methodology achieves the optimal braking performancewithoutthewheel-railcontactinformation.Numerical simulation results for uncertain slippery rails verify the effectiveness of the proposed methodology.
基金supported by the National Natural Science Foundation of China(U1134201 and 51175032)the National Hitech Research and Development Program of China(973 Program)(211CD71104)
文摘When the operation speed of the high-speed train increases and the weight of the carbody becomes lighter,not only does the sensitivity of the wheel/rail contact get higher,but also the vibration frequency range of the vehicle system gets enlarged and more frequencies are transmitted from the wheelset to the carbody.It is important to investigate the vibration characteristics and the dynamic frequency transmission from the wheel/rail interface to the carbody of the high-speed electric multi-uint（EMU）.An elastic highspeed vehicle dynamics model is established in which the carbody,bogieframes,and wheelsets are all dealt with as flexible body.A rigid high-speed vehicle dynamics model is set up to compare with the simulation results of the elastic model.In the rigid vehicle model,the carbody,bogieframes and wheelsets are treated as rigid component while the suspension and structure parameters are the same as used in the elastic model.The dynamic characteristic of the elastic high speed vehicle is investigated in time and frequency domains and the di ff erence of the acceleration,frequency distribution and transmission of the two types of models are presented.The results show that the spectrum power density of the vehicle decreases from the wheelset to the carbody and the acceleration transmission ratio is approximately from 1%to 10%for each suspension system.The frequency of the wheelset rotation is evident in the vibration of the flexible model and is transmitted from the wheelset to the bogieframe and to thecarbody.The results of the flexible model are more reasonable than that of the rigid model.A field test data of the high speed train are presented to verify the simulation results.It shows that the simulation results are coincident with the field test data.
文摘Due to the coexistence of compressibility,viscosity,and threedimensional effects,laminar flow is difficult to maintain for high-speed boundary layer on complex geometries.The unstable disturbance waves in the boundary layer are excited and rapidly increase during the receptivity process,so sufficiently large Reynolds stress causes the basic flow velocity profile to change,and the formation of turbulence is inevitable.
文摘High speed railway technologies are rapidly development in the world.The total distance of the high speed railway is more than 40,000 kilometers in China,and many types of high speed Electrical Multi-Units(EMUs)are operated.The top operation velocity of the train reaches 350 km/h.New science and technologies are developing rapidly.New generation technologies such as the information technology,intelligent manufacturing,new material and processing,innovating design philosophy have revolutionary influence on the high speed train.It promotes the high speed train performance such as intelligence,reliable operation and environment-friendly.Based on many years investigation of the trend of the technology development and requirement of general public,the trend of technology development in five aspects are presented in this paper.The five aspects include economic applicability,high speed and high efficiency,green and low carbon,intelligent safety,comfortable and high quality.
文摘High-speed railway holds a pivotal position in China's transportation system,closely intertwined with the production and daily lives of people.It serves as a critical carrier for fostering a new development paradigm,supporting high-quality growth,and building a modernized strong nation.Up to 2025,the high-speed railway operating mileage in China has exceeded 50000 km,ranking the first in the world and surpassing the combined total of high-speed railway operating mileage in all other countries.
基金funded by Central Government Guide Local Science and Technology Development Fund Project(No.216Z1602G).
文摘The finite element software was used to simulate the hot rolling finishing process,and the distribution of force,heat and velocity in the deformation zone was analyzed.Based on the high temperature friction and wear tester,the friction process of high speed steel(HSS)roll and strip during hot rolling was simulated.The results show that the process can be divided into three stages based on the observed changes in the friction coefficient throughout the rolling process.In the initial state,owing to the instability of the rolling process,the friction coefficient rapidly attains its maximum value within a brief interval and subsequently declines rapidly.Subsequently,the friction coefficient undergoes a gradual increase due to the formation of finer oxide layer particles during the growth period.Ultimately,the friction coefficient will be maintained at a stable value between 0.34 and 0.37.At this time,the HSS roll matrix mainly contains MC,M_(2)C and M_(6)C carbides.Additionally,the surface oxide layer particles become larger and more densely distributed,which can inhibit the wear of HSS rolls to a certain extent.
基金supported by National Natural Science Foundation of China(12172308).
文摘The pantograph area is a critical source of aerodynamic noise in high-speed trains,generating noise both directly and through its cavity,a factor that warrants considerable attention.One effective method for reducing aerodynamic noise within the pantograph cavity involves the introduction of a jet at the leading edge of the cavity.This study investigates the mechanisms driving cavity aerodynamic noise under varying jet velocities,using Improved Delayed Detached Eddy Simulation(IDDES)and Ffowcs Williams-Hawkings(FW-H)equations.The numerical simulations reveal that an increase in jet velocity results in a higher elevation of the shear layer above the cavity.This elevation,in turn,diminishes the interaction area between the vortices produced by jet shedding and the trailing edge of the cavity wall.Consequently,the amplitude of pressure pulsations on the cavity surface is reduced,leading to a decrease in radiated far-field noise.Specifically,simulations conducted with a jet velocity of 111.11 m/s indicate a remarkable noise reduction of approximately 4 dB attributable to this mechanism.To further enhance noise mitigation,alterations to the inclination angles of the cavity’s front and rear walls are also explored.The findings demonstrate that,at a constant jet velocity,such modifications significantly diminish pressure pulsations at the intersection of the rear wall and cavity floor,optimizing overall noise reduction and achieving a maximum reduction of approximately 6 dB.
基金supported by Research Project of Zhuhai City Polytechnic(Grant No.2024KYBS06)Education Research Project of Zhuhai City Polytechnic(Grant No.JY20250404).
文摘The noise generated by high-speed hair dryers significantly affects user experience,with aerodynamic design playing a crucial role in controlling sound emissions.This study investigates the aerodynamic noise characteristics of a commercial high-speed hair dryer through Computational Fluid Dynamics(CFD)analysis.The velocity field,streamline patterns,and vector distribution within the primary flow path and internal cavity were systematically examined.Results indicate that strong interactions between the wake flow generated by the guide vanes and the straight baffle in the rear flow path induce vortex structures near the outlet,which are primarily responsible for highfrequency noise.To address this,the guide vanes and rear flow path geometry were redesigned and optimized for improved acoustic and aerodynamic performance.Underrated operating conditions(28 V,20,000 rpm),the optimized configuration achieves a noise reduction of more than 2.2 dB while increasing outlet wind speed by over 9%.Moreover,the noise suppression effect becomes more pronounced at lower rotational speeds.
文摘1. Introduction High-speed gas-particle flows are crucial in engineering applications and natural phenomena, such as volcanic eruptions,combustion, and hypersonic flight. These flows involve complex gas-particle interactions, posing significant challenges for simulations and experiments. This research highlight summarizes recent advancements in gas-particle dynamics under compressible conditions, covering key findings, numerical and experimental progress, and future directions. Details can be found in the work of Capecelatro and Wagner (Gas-particle dynamics in high-speed flows. Annual Review of Fluid Mechanics 2024;56:379–403).
文摘LEADSFON(XIAMEN)TEXTILE TECH CO.,LTD.is a manufacturer of knitting circular machines.Since 2002,the company has served as an ODM and supporting partner for the Italian brand"PILOTELLI".In 2014,LEADSFON officially acquired PILOTELLI,integrating advanced Italian technology into its core operations.
文摘Safer,smarter,faster...In China,people prefer high-speed trains to flights if the journey time is under five hours.High-speed train travel is set to become even more attractive with the addition of a new member to the high-speed train family:the CR450,the world’s fastest electric multiple unit(EMU).
基金Supported by the National Natural Science Foundation of China(50975141)the National Scienceand Technology Major Project(2010ZX04012-042)the Aeronautical Science Foundation(2010352005)~~
文摘Surface integrity of a new damage-tolerant titanium alloy （TC21）, including surface roughness, microhardness and metallurgical structure is investigated when normal and high speed milling are used at different tool wear status. Results show that good surface integrity of TC21 can be obtained in high speed milling. In addition, even in acutely worn stages, there is no so-called serious hardening layer （or white layer） according to the studies on microhardness and metallurgical structure.
文摘The engineblock production lines need high speed tapping with tungsten carbide taps. In the tapping process, the machining precision and the tool life of taps are directly influenced by tapping forces. And the parameter optimization of tap structures is also correlated with the variation of tapping forces. Therefore, the study of tapping forces is necessary in developing new style taps. Several experiments about some novel carbide taps are performed on a vertical machining center by a Kistler dynamometer system in blind tapping both gray cast iron and ductile cast iron. And the variations of tapping forces are analyzed in tapping-in and tapping-out periods. It indicates that cutting forces hardly vary with the tap wear in tapping cast iron. Contrarily, tapping forces are closely correlated with the holding method. Besides, it also depends on the helix angle, the flute numbers and the plasticity of the work material to some extent.
基金The National Natural Science Foundation of China(No.51301038,51201031,51371050)the Industry-AcademiaResearch Cooperative Innovation Fund of Jiangsu Province(No.BY2014127-03)+1 种基金the Natural Science Foundation of Jiangsu Province(No.BK20141306)the Scientific and Technological Innovation Fund of Danyang(No.SY201305)
文摘The influence of rare earth metals and heat treatment on the microstructure and performance of M42 steel has been investigated by means of an optical microscope OM scanning electron microscope SEM energy dispersive spectroscopy EDS transmission electron microscope TEM electron back-scatter diffraction EBSD and X-ray diffraction XRD . The results show that M2 C is the prevailing type of eutectic carbides in M42 steel. After modification with rare earth metals M2 C eutectic carbides change from the ordered lamellar structure into a circular structure.Despite different morphologies the two carbides present the same characteristics of microstructure and growth orientation.Compared with lamellar carbides M2 C carbides with the circular structure are much easier to decompose and spheroidize after heating which remarkably refines the carbide dimensions.The refined carbides improve the supersaturation of alloying elements in martensite and increase the hardness of M42 steel by 1.5 HRC.
文摘Shaped charge jet formation process is studied under the conditions of different background lights by means of high speed frame photography. In order to shoot true jet appearance, the glass tube in which jet moves is vacuumized. The experiment results show that observing jet appearance with the double reflecting mirrors system is feasible as long as the vacuum of the glass tube can meet the requirement of experiment.
文摘A multiplexer with a low-distortion high-bandwidth analog switch is presented. The gate-to-source voltage of the switch is set by the combined on-voltage of a pMOS and an nMOS,and the difference between its gate-source voltage and the threshold voltage （VGST） is guaranteed to be constant with input variation. Thus, the body effect is nearly canceled. Implemented in a TSMC 0.18μm CMOS process, results from HSPICE simulation show that the VGST is nearly constant with an input range from 0.3 to 1.7V,and the - 3dB bandwidth is larger than 10GHz;the SFDR （spurious free dynamic range） of the output is 67. lldB with 1GHz input frequency; the turn-on time is 2.98ns,and the turn-off time is 1.35ns, which indicates a break-before-make action of the multiplexer. The proposed structure can be applied to high speed signal transmission.
文摘Based on the theory of elastic mechanics and material mechanics, the orientation precision of the hohl schaft kegel（HSK） tooling system in static and dynamic states is theoretically and experimentally studied. The relation between the clamping force and the shank taper is obtained. And a proper clamping force is found to be essential to assure the axial and radial orientation precisions of the HSK tooling system in high speed machining （HSM）. Analytical results show that the reason why the HSK tooling system can keep high precision at the high rotational speed is that the actual axial clamping force keeps the two surfaces of the shank and the spindle in contact all the time.
基金Supported by College Doctoral- Program Special ResearchFund of the Ministry of Education (No.970 0 562 1 )
文摘Serious commutation lag occurs when a Brushless DC Motor(BLDCM) operates at high speeds,and this leads to torque decline with ripple.In this paper,an advanced conduction control scheme is proposed which can accelerate the commutation and enhance the torque production remarkably.Besides,an on line adjusting algorithm based on the Golden Section Method is adopted to search the optimal advanced conduction angle.Simulation and experimental results verify the feasibility and effectivity of the scheme proposed.
文摘This article deals with an experimental study on the aerodynamic characteristics of a low-drag high-speed nature laminar flow (NLF) airfoil for business airplanes in the TST27 wind tunnel at Delft University of Technology, the Netherlands. In this experiment, in an attempt to reduce the errors of measurement and improve its accuracy in high-speed flight, some nonintrusive meas- urement techniques, such as the quantitative infrared thermography (IRT), the digital particle imaging velocimetry (PIV), and the s...
