We fabricate the Tm-doped double cladding silica fiber by using the vapor-solution hybrid-doping method, then build up an all-fiber Tin-doped fiber laser which can provide the output power of up to 121 W, correspondin...We fabricate the Tm-doped double cladding silica fiber by using the vapor-solution hybrid-doping method, then build up an all-fiber Tin-doped fiber laser which can provide the output power of up to 121 W, corresponding to a slope efficiency of 51% and an optical-optical efficiency of 48%. By using the domestic Tin-doped fiber, it is the first time a hundred-watt level output at 1915nm has been achieved, to the best of our knowledge. The thermal effect of Tm-doped fiber laser is also analyzed.展开更多
We report on the room-temperature cascade laser （QCL） at λ -4.7μm. cw operation of a surface grating Both grating design and material distributed feedback （DFB） quantum optimization are used to decrease the thre...We report on the room-temperature cascade laser （QCL） at λ -4.7μm. cw operation of a surface grating Both grating design and material distributed feedback （DFB） quantum optimization are used to decrease the threshold current density and to increase the output power. For a high-reflectivity-coated 13-μm-wide and 4- mm-long laser, high wall-plug efficiency of 6% is obtained at 20℃ from a single facet producing over I W of ew output power. The threshold current density of DFB QCL is as low as 1.13kA/cm^2 at 10℃ and 1.34kA/cm2 at 30℃ in cw mode. Stable single-mode emission with a side-mode suppression ratio of about 30 dB is observed in tile working temperature range of 20-50℃.展开更多
Theoretical analysis model has been established for CO 2 laser to describe the process of dynamic emission in the electrooptically Q switched laser .The electron excitation and the energy transfer of vibration level a...Theoretical analysis model has been established for CO 2 laser to describe the process of dynamic emission in the electrooptically Q switched laser .The electron excitation and the energy transfer of vibration level and the rotational relaxation of rotational levels are described. The comparison between this model and a set of coupled rat equations model are discussed.展开更多
1064 nm semiconductor lasers are crucial for optical communication,but the multitransverse‐mode nature of vertical‐cavity surface‐emitting laser(VCSEL)degrades beam quality over long distances.Traditional methods t...1064 nm semiconductor lasers are crucial for optical communication,but the multitransverse‐mode nature of vertical‐cavity surface‐emitting laser(VCSEL)degrades beam quality over long distances.Traditional methods to achieve fundamental transverse mode often limit power output and modulation band-width.We propose a two‐junction 1064 nm VCSEL with double embedded antiresonant oxide islands embedded in the top distributed Bragg reflector(DBR).By varying the oxide island count,aperture size,and position,we explore the behaviors of threshold current and output power for different transverse modes.This simulation‐based design achieves a maximum funda-mental transverse mode output power of 36.2 mW,a power conversion effi-ciency of 54.8%,and a 3 dB bandwidth of 33.06 GHz using oxide islands with 4 and 6μm radii at the second and eighth pairs of the top DBR.The enhanced modal discrimination raises the threshold current for higher‐order modes,thereby improving the fundamental mode output power,making this VCSEL structure promising for long‐distance optical communication.展开更多
Abstract---The stability of the drive current is very important for a laser driver, while it is difficult to maintain the current stable at a high value for the laser driver. On the other hand, the range of the drive ...Abstract---The stability of the drive current is very important for a laser driver, while it is difficult to maintain the current stable at a high value for the laser driver. On the other hand, the range of the drive current is expected to be as wide as possible to be applied to different kinds of lasers. In this paper, a high current laser driver for the superluminescent light emitting diode （SLED） is presented, which is used in the optic fiber gyro embedded by a 0.35 μm bipolar complementary metal-oxide-semiconductor transistor （BiCMOS） process. The laser driver provides automatic power control and certain value of current determined by the external resister. The system is based on the optic-electric feedback theory and uses the closed-loop control technique to maintain the drive current stable. The system is capable of producing stable current ranges from 4 mA to 200 mA when the value of external resister changes.展开更多
基金Supported by the National High-Technology Research and Development Program of China under Grant No 2013AA031501the National Natural Science Foundation of China for Director Fund of WNLO
文摘We fabricate the Tm-doped double cladding silica fiber by using the vapor-solution hybrid-doping method, then build up an all-fiber Tin-doped fiber laser which can provide the output power of up to 121 W, corresponding to a slope efficiency of 51% and an optical-optical efficiency of 48%. By using the domestic Tin-doped fiber, it is the first time a hundred-watt level output at 1915nm has been achieved, to the best of our knowledge. The thermal effect of Tm-doped fiber laser is also analyzed.
基金Supported by the National Basic Research Program of China under Grant Nos 2013CB632801 and 2013CB632803the National Natural Science Foundation of China under Grant Nos 61435014,61306058 and 61274094the Beijing Natural Science Foundation under Grant No 4144086
文摘We report on the room-temperature cascade laser （QCL） at λ -4.7μm. cw operation of a surface grating Both grating design and material distributed feedback （DFB） quantum optimization are used to decrease the threshold current density and to increase the output power. For a high-reflectivity-coated 13-μm-wide and 4- mm-long laser, high wall-plug efficiency of 6% is obtained at 20℃ from a single facet producing over I W of ew output power. The threshold current density of DFB QCL is as low as 1.13kA/cm^2 at 10℃ and 1.34kA/cm2 at 30℃ in cw mode. Stable single-mode emission with a side-mode suppression ratio of about 30 dB is observed in tile working temperature range of 20-50℃.
文摘Theoretical analysis model has been established for CO 2 laser to describe the process of dynamic emission in the electrooptically Q switched laser .The electron excitation and the energy transfer of vibration level and the rotational relaxation of rotational levels are described. The comparison between this model and a set of coupled rat equations model are discussed.
基金National Key Research and Development Program of China,Grant/Award Number:2021YFA1401100National Natural Science Foundation of China,Grant/Award Numbers:52202165,52472148,62304031Natural Science Foundation of Sichuan Province,Grant/Award Number:2025ZNSFSC0351。
文摘1064 nm semiconductor lasers are crucial for optical communication,but the multitransverse‐mode nature of vertical‐cavity surface‐emitting laser(VCSEL)degrades beam quality over long distances.Traditional methods to achieve fundamental transverse mode often limit power output and modulation band-width.We propose a two‐junction 1064 nm VCSEL with double embedded antiresonant oxide islands embedded in the top distributed Bragg reflector(DBR).By varying the oxide island count,aperture size,and position,we explore the behaviors of threshold current and output power for different transverse modes.This simulation‐based design achieves a maximum funda-mental transverse mode output power of 36.2 mW,a power conversion effi-ciency of 54.8%,and a 3 dB bandwidth of 33.06 GHz using oxide islands with 4 and 6μm radii at the second and eighth pairs of the top DBR.The enhanced modal discrimination raises the threshold current for higher‐order modes,thereby improving the fundamental mode output power,making this VCSEL structure promising for long‐distance optical communication.
文摘Abstract---The stability of the drive current is very important for a laser driver, while it is difficult to maintain the current stable at a high value for the laser driver. On the other hand, the range of the drive current is expected to be as wide as possible to be applied to different kinds of lasers. In this paper, a high current laser driver for the superluminescent light emitting diode （SLED） is presented, which is used in the optic fiber gyro embedded by a 0.35 μm bipolar complementary metal-oxide-semiconductor transistor （BiCMOS） process. The laser driver provides automatic power control and certain value of current determined by the external resister. The system is based on the optic-electric feedback theory and uses the closed-loop control technique to maintain the drive current stable. The system is capable of producing stable current ranges from 4 mA to 200 mA when the value of external resister changes.
