This paper presents an improved method for design of CMOS comparator based on a preamplifier-latch circuit driven by a clock. Design is intended to be implemented in Sigma-delta Analog-to-Digital Converter (ADC). The ...This paper presents an improved method for design of CMOS comparator based on a preamplifier-latch circuit driven by a clock. Design is intended to be implemented in Sigma-delta Analog-to-Digital Converter (ADC). The main advantage of this design is capable to reduce power dissipation and increase speed of an ADC. The design is simulated in 0.18 μm CMOS Technology with Cadence environment. Proposed design exhibits good accuracy and a low power consumption about 102 μW with operating sampling frequency 125 MHz and 1.8 V supply. Simulation results are reported and compared with earlier work done and improvements are observed in this work.展开更多
设计实现了一种带参考通道的时间交叉ADC(TIADC)通道误差数字后台实时校准方法。参考通道ADC与TIADC各个子通道ADC依次对齐,对同一输入信号在同一时刻进行采样并转换,输出差值被用在数字后台LMS自适应校准算法中以计算通道间的失配误差...设计实现了一种带参考通道的时间交叉ADC(TIADC)通道误差数字后台实时校准方法。参考通道ADC与TIADC各个子通道ADC依次对齐,对同一输入信号在同一时刻进行采样并转换,输出差值被用在数字后台LMS自适应校准算法中以计算通道间的失配误差估计值,实现对各通道失调失配、增益失配和采样时刻失配造成误差的实时校准。FPGA实验结果表明,应用于12 bit,4通道,采样频率400 MS/s的TIADC中,归一化输入频率fin/fs=0.134时,在失调误差、增益误差和采样时钟误差分别为5%FSR、5%和1%Ts条件下,校准后信号噪声失真比(SNR)和无杂散动态范围(SFDR)分别提高了约19.61 d B和28.28 d B,为73.83 d B和86.15 d B,有效位达到11.96位。本校准方法计算复杂度低、易于硬件实现,能够应用于任意通道数的TIADC校准。展开更多
文摘This paper presents an improved method for design of CMOS comparator based on a preamplifier-latch circuit driven by a clock. Design is intended to be implemented in Sigma-delta Analog-to-Digital Converter (ADC). The main advantage of this design is capable to reduce power dissipation and increase speed of an ADC. The design is simulated in 0.18 μm CMOS Technology with Cadence environment. Proposed design exhibits good accuracy and a low power consumption about 102 μW with operating sampling frequency 125 MHz and 1.8 V supply. Simulation results are reported and compared with earlier work done and improvements are observed in this work.
文摘设计实现了一种带参考通道的时间交叉ADC(TIADC)通道误差数字后台实时校准方法。参考通道ADC与TIADC各个子通道ADC依次对齐,对同一输入信号在同一时刻进行采样并转换,输出差值被用在数字后台LMS自适应校准算法中以计算通道间的失配误差估计值,实现对各通道失调失配、增益失配和采样时刻失配造成误差的实时校准。FPGA实验结果表明,应用于12 bit,4通道,采样频率400 MS/s的TIADC中,归一化输入频率fin/fs=0.134时,在失调误差、增益误差和采样时钟误差分别为5%FSR、5%和1%Ts条件下,校准后信号噪声失真比(SNR)和无杂散动态范围(SFDR)分别提高了约19.61 d B和28.28 d B,为73.83 d B和86.15 d B,有效位达到11.96位。本校准方法计算复杂度低、易于硬件实现,能够应用于任意通道数的TIADC校准。
