The aim of the work was the assessment of capability for the change control in the structure of a compact material of pelletized heatproof nickel alloy grade EP741NP using the atomic emission method. The proposed meth...The aim of the work was the assessment of capability for the change control in the structure of a compact material of pelletized heatproof nickel alloy grade EP741NP using the atomic emission method. The proposed method of evaluation is based on the statistical significance of the analytical response differences during atomic emission spectroscopy of solid specimens taken from one sample before and after heat treatment using the instruments AtomComp 81 and ARL 4460 with a high-voltage spark excitation. For calculations, the ratio of the line intensity of the analyzed element to the line intensity of the main sample component (in our case Ni<sub>2254</sub>) was used. The difference confidence estimation was made by the averages comparison method in a variance analysis. The study results are presented on the effect of material structure on analytical response during atomic emission spectroscopy of solid specimens. It was proved that the samples before and after heat treatment give statistically differing results while analyzed.展开更多
Goal: Low wolfram-containing cutting composite was obtained by fusion of titanium carbonitride and high melting temperature binding metallic phase. Method: The composite was obtained via compaction and further sinteri...Goal: Low wolfram-containing cutting composite was obtained by fusion of titanium carbonitride and high melting temperature binding metallic phase. Method: The composite was obtained via compaction and further sintering in vacuum furnace at 1600°C under 10<sup>-3</sup> Pa pressure. Phase analysis was performed on X-ray apparatus “DRON-3”;microstructure was determined by electron microscope NANOLAB-7, microhardness by MUCKE-mark microhardness meter;relative resistance of cutters was evaluated at similar modes of cutting according to distances they passed;experiments were carried out on turning lathe. Results: Physical-mechanical characteristics of the obtained composite are: σ<sub>bend</sub>, = 1000 - 1150 MPa, σ<sub>bend1000</sub>°C = 600 MPa, HV = 14 GPa;HV<sub>1000</sub>°C = 6.5 GPa. High speeds of cutting and high temperatures resistance of cutters made by the obtained composites exceeds 1.5 - 2-folds that of cutters made of the known BK8 and KNT20 hard alloys. Conclusion: Its application is recommended in hot steel treatment by cutting, for removal of the so-called burrs, as well as in steel treatment by cutting during pure and semi-pure operations. It can also be used in jet engines, chemical industry apparatuses, electric-vacuum devices, in industry of responsible details of rockets, nuclear reactors, flying apparatuses.展开更多
文摘The aim of the work was the assessment of capability for the change control in the structure of a compact material of pelletized heatproof nickel alloy grade EP741NP using the atomic emission method. The proposed method of evaluation is based on the statistical significance of the analytical response differences during atomic emission spectroscopy of solid specimens taken from one sample before and after heat treatment using the instruments AtomComp 81 and ARL 4460 with a high-voltage spark excitation. For calculations, the ratio of the line intensity of the analyzed element to the line intensity of the main sample component (in our case Ni<sub>2254</sub>) was used. The difference confidence estimation was made by the averages comparison method in a variance analysis. The study results are presented on the effect of material structure on analytical response during atomic emission spectroscopy of solid specimens. It was proved that the samples before and after heat treatment give statistically differing results while analyzed.
文摘Goal: Low wolfram-containing cutting composite was obtained by fusion of titanium carbonitride and high melting temperature binding metallic phase. Method: The composite was obtained via compaction and further sintering in vacuum furnace at 1600°C under 10<sup>-3</sup> Pa pressure. Phase analysis was performed on X-ray apparatus “DRON-3”;microstructure was determined by electron microscope NANOLAB-7, microhardness by MUCKE-mark microhardness meter;relative resistance of cutters was evaluated at similar modes of cutting according to distances they passed;experiments were carried out on turning lathe. Results: Physical-mechanical characteristics of the obtained composite are: σ<sub>bend</sub>, = 1000 - 1150 MPa, σ<sub>bend1000</sub>°C = 600 MPa, HV = 14 GPa;HV<sub>1000</sub>°C = 6.5 GPa. High speeds of cutting and high temperatures resistance of cutters made by the obtained composites exceeds 1.5 - 2-folds that of cutters made of the known BK8 and KNT20 hard alloys. Conclusion: Its application is recommended in hot steel treatment by cutting, for removal of the so-called burrs, as well as in steel treatment by cutting during pure and semi-pure operations. It can also be used in jet engines, chemical industry apparatuses, electric-vacuum devices, in industry of responsible details of rockets, nuclear reactors, flying apparatuses.
