In order to solve the immaturity of decision-making methods in the regulation of winter heating in greenhouses,this study proposed a solution to the problem of greenhouse winter heating regulation using a dynamic prog...In order to solve the immaturity of decision-making methods in the regulation of winter heating in greenhouses,this study proposed a solution to the problem of greenhouse winter heating regulation using a dynamic programming algorithm.A mathematical model that included indoor environmental state variables,optimization decision variables,and outdoor random variables was established.The temperature is kept close to the expected value and the energy consumption is low.The model predicts the control solution by considering the cost function within the next 10 steps.The two-stage planning method was used to optimize the state of each moment step by step.The temperature control strategy model was obtained by training the relationship between indoor temperature,outdoor temperature,and heating time after optimization using a regression algorithm.Based on a typical Internet of Things(IoT)structure,the greenhouse control system was designed to regulate the optimal control according to the feedback of the current environment.Through testing and verification,the optimized control method could stabilize the temperature near the target value.Compared to the threshold control(threshold interval of 2.0°C)under similar weather conditions,the optimized control method reduced the temperature fluctuation range by 0.9°C and saved 7.83 kW·h of electricity,which is about 14.56%of the total experimental electricity consumption.This shows that the dynamic programming method is feasible for environmental regulation in actual greenhouse production,and further research can be expanded in terms of decision variables and policy models to achieve a more comprehensive,scientific,and precise regulation.展开更多
Maintaining stable high temperatures under pressure remains a challenge in high-pressure,high-temperature experiments using multi-anvil presses(MAPs).Temperature fluctuations exceeding 10℃ at high pressures are commo...Maintaining stable high temperatures under pressure remains a challenge in high-pressure,high-temperature experiments using multi-anvil presses(MAPs).Temperature fluctuations exceeding 10℃ at high pressures are common and particularly problematic with LaCrO_(3) heaters,which can experience significant power fluctuations and even failure due to substantial resistance changes—an issue conventional thyristorcontrolled heating systems cannot effectively manage.To address this limitation,we have developed the Multi-Anvil Stable Temperature controller(MASTer),a high-performance heating system optimized for MAP experiments.MASTer enables precise,high-speed measurement of heating parameters and power output control,incorporating a gentle regulation strategy to enhance stability.It ensures consistent heating across various heater types,including LaCrO_(3),with power fluctuations limited to±0.1 W and temperature fluctuations to within±2℃ in most cases.The design,operating principles,user interface,functionality,and performance of the heating system are discussed in detail.展开更多
The article analyses the problem of determining the operating parameters of the district heating substation cooperating with the air heating system in technological air conditioning systems equipped with heat exchange...The article analyses the problem of determining the operating parameters of the district heating substation cooperating with the air heating system in technological air conditioning systems equipped with heat exchangers with high efficiency of heat recovery.Attention was paid to the correct selection of heat exchangers for the heat output balance depending on the heat recovery protection algorithms against a drop in the temperature of the heat transfer surface below 0℃.Critical parameters were determined in Polish climatic conditions,at which the operation of the heat recovery exchanger in the air conditioning system is switched off or limited.It has been proven that the proper functioning of the district heating substation cooperating with the installation of air conditioning with high heat recovery efficiency requires the use of two heat exchangers with different characteristics,equipped with properly selected temperature control systems.The optimal model of cooperation between the technological air conditioning system and the heating substation was also indicated.展开更多
Rapid technological advancements drive miniaturization and high energy density in devices,thereby increasing nanoscale thermal management demands and urging development of higher spatial resolution technologies for th...Rapid technological advancements drive miniaturization and high energy density in devices,thereby increasing nanoscale thermal management demands and urging development of higher spatial resolution technologies for thermal imaging and transport research.Here,we introduce an approach to measure nanoscale thermal resistance using in situ inelastic scanning transmission electron microscopy.By constructing unidirectional heating flux with controlled temperature gradients and analyzing electron energy-loss/gain signals under optimized acquisition conditions,nanometer-resolution in mapping phonon apparent temperature is achieved.Thus,interfacial thermal resistance is determined by calculating the ratio of interfacial temperature difference to bulk temperature gradient.This methodology enables direct measurement of thermal transport properties for atomic-scale structural features(e.g.,defects and heterointerfaces),resolving critical structure-performance relationships,providing a useful tool for investigating thermal phenomena at the(sub-)nanoscale.展开更多
This paper mainly deals with the present situation, characteristics, and countermeasures of cooling in deep mines.Given existing problems in coal mines, a HEMS cooling technology is proposed and has been successfully ...This paper mainly deals with the present situation, characteristics, and countermeasures of cooling in deep mines.Given existing problems in coal mines, a HEMS cooling technology is proposed and has been successfully applied in some mines.Because of long-term exploitation, shallow buried coal seams have become exhausted and most coal mines have had to exploit deep buried coal seams.With the increase in mining depth, the temperature of the surrounding rock also increases, resulting in ever increasing risks of heat hazard during mining operations.At present, coal mines in China can be divided into three groups, i.e., normal temperature mines, middle-to-high temperature mines and high temperature mines, based on our investigation into high temperature coal mines in four provinces and on in-situ studies of several typical mines.The principle of HEMS is to extract cold energy from mine water inrush.Based on the characteristics of strata temperature field and on differences in the amounts of mine water inrush in the Xuzhou mining area, we proposed three models for controlling heat hazard in deep mines:1) the Jiahe model with a moderate source of cold energy;2) the Sanhejian model with a shortage of source of cold energy and a geothermal anomaly and 3) the Zhangshuanglou model with plenty of source of cold energy.The cooling process of HEMS applied in deep coal mine are as follows:1) extract cold energy from mine water inrush to cool working faces;2) use the heat extracted by HEMS to supply heat to buildings and bath water to replace the use of a boiler, a useful energy saving and environmental protection measure.HEMS has been applied in the Jiahe and Sanhejian coal mines in Xuzhou, which enabled the temperature and humidity at the working faces to be well controlled.展开更多
In order to solve the heat damages in deep mines, a cool-wall cooling technology and its working model are proposed based on the principles of heat absorption and insulation in this paper. During this process, the dif...In order to solve the heat damages in deep mines, a cool-wall cooling technology and its working model are proposed based on the principles of heat absorption and insulation in this paper. During this process, the differential equation of thermal equilibrium for roadway control unit is built, and the heat adsorption control equation of cool-wall cooling system is derived by an integral method, so as to obtain the quantitative relationship among the heat absorption capacity of cooling system, the heat dissipating capacity of surrounding rock and air temperature change. Then, the heat absorption capacity required by air temperature less than the standard value for safety is figured out by section iterative method with the simultaneous solution of heat absorption control equation and the heat dissipation density equation of surrounding rock. Finally, the results show that as the air temperature at the inlet of roadway is 25 ℃, the roadway wall is covered by heat-absorbing plate up to 39% of the area, as well as the cold water is injected into the heat-absorbing plate with a temperature of 20 ℃ and a mass flow of 113.6 kg/s, the air flow temperature rise per kilometer in the roadway can be less than 3 ℃.展开更多
OBJECTIVE:To compare the curative effects of heat-sensitive moxibustion with conventional drugs on chronic persistent asthma and seek a valuable therapy to replaceWestern Medicine.METHODS:The participants in this mult...OBJECTIVE:To compare the curative effects of heat-sensitive moxibustion with conventional drugs on chronic persistent asthma and seek a valuable therapy to replaceWestern Medicine.METHODS:The participants in this multi-center,randomized,and controlled study were randomly divided into two groups:group A(n=144),treated with heat-sensitive moxibustion(50 sessions)and group B(n=144),treated with Seretide(salmeterol50μg/fluticasone 250μg,twice a day).The scores of asthma control test(ACT),forced expiratory volume in 1 second(FEV1),peak expiratory flow(PEF),and attack frequency were measured after 15,30,60,and 90 days of treatment.Patients followed up3 and 6 months after treatment.RESULTS:There was a significant difference(P=0.0002)in the ACT score and lung function between the two groups after 3 months of treatment and(P=0.000 03)during the follow-up visits.In addition,heat-sensitive moxibustion reduced attack frequency in the period from inclusion to the6-month follow-up visit.CONCLUSION:This study shows that heat-sensitive moxibustion may have a comparable curative effect toSeretide(salmeterol/fluticasone)on asthma.展开更多
Design and control of pressure-swing distillation(PSD) with different heat integration modes for the separation of methyl acetate/methanol azeotrope are explored using Aspen Plus and Aspen Dynamics. First, an optimum ...Design and control of pressure-swing distillation(PSD) with different heat integration modes for the separation of methyl acetate/methanol azeotrope are explored using Aspen Plus and Aspen Dynamics. First, an optimum steady-state separation configuration conditions are obtained via taking the total annual cost(TAC) or total reboiler heat duty as the objective functions. The results show that about 27.68% and 25.40% saving in TAC can be achieved by the PSD with full and partial heat integration compared to PSD without heat integration. Second,temperature control tray locations are obtained according to the sensitivity criterion and singular value decomposition(SVD) analysis and the single-end control structure is effective based on the feed composition sensitivity analysis. Finally, the comparison of dynamic controllability is made among various control structures for PSD with partial and full heat integration. It is shown that both control structures of composition/temperature cascade and pressure-compensated temperature have a good dynamic response performance for PSD with heat integration facing feed flowrate and composition disturbances. However, PSD with full heat integration performs the poor controllability despite of a little bit of economy.展开更多
Effective thermal control systems are essential for reliable operation of spacecraft.A dual-driven intelligent combination control strategy is proposed to improve the temperate control and heat flux tracking effects.B...Effective thermal control systems are essential for reliable operation of spacecraft.A dual-driven intelligent combination control strategy is proposed to improve the temperate control and heat flux tracking effects.Both temperature regulation and heat flux tracking errors are employed to generate the final control action;their contributions are adaptively adjusted by a fuzzy fusing policy of control actions.To evaluate the control effects,describe a four-nodal mathematical model for analyzing the dynamic characteristics of the controlled heat pipe space cooling system（HP-SCS） consisting of an aluminum-ammonia heat pipe and a variable-emittance micro-electromechanical-system（MEMS） radiator.This dynamical model calculates the mass flow-rate and condensing pressure of the heat pipe working fluid directly from the systemic nodal temperatures,therefore,it is more suitable for control engineering applications.The closed-loop transient performances of four different control schemes have been numerically investigated.The results conclude that the proposed intelligent combination control scheme not only improves the thermal control effects but also benefits the safe operation of HP-SCS.展开更多
For purpose of achieving the desired thermal comfort level and reducing the economic cost of maintaining the thermal comfort of green residential building,an energy efficient thermal comfort control strategy based on ...For purpose of achieving the desired thermal comfort level and reducing the economic cost of maintaining the thermal comfort of green residential building,an energy efficient thermal comfort control strategy based on economic model predictive control(EMPC)for green residential buildings which adopts household heat metering is presented.Firstly,the nonlinear thermal comfort model of heating room is analyzed and obtained.A practical nonlinear thermal comfort prediction model is obtained by using an approximation method.Then,the economic cost function and optimization problem of energy-saving under the necessary thermal comfort requirements are constructed to realize the optimal economic performance of the dynamic process.The energy efficient thermal comfort MPC(EETCMPC)is designed.Finally,the comparison and analysis between EETCMPC and Double-layer Model Predictive Control(DMPC)is simulated.The simulation results reveal that when the clothing insulation is typical,the energy efficiency of EETCMPC is 8.9%and 11.6%,respectively,in the two simulation scenarios.When the clothing insulation varies with temperature,the energy efficiency of EETCMPC is 7.29%and 9.15%,respectively,and the total energy consumption is reduced by about 1.65%and 14.6%,respectively,compared with the typical clothing insulation.The economic performance is improved in the thermal comfort dynamic process of heating room.展开更多
OBJECTIVE: To observe the curative effect of Jinye Baidu granule in the treatment of fever and swollen and sore throat caused by wind-warmth lung-heat disease(heat in the lung-wei) to further identify the indications....OBJECTIVE: To observe the curative effect of Jinye Baidu granule in the treatment of fever and swollen and sore throat caused by wind-warmth lung-heat disease(heat in the lung-wei) to further identify the indications.METHODS: This randomized, double-blind, parallel, controlled trial will include patients with acute upper respiratory infection and wind-warmth lung-heat disease(heat in the lung-wei). Patientswith serious bacterial infection(white blood cell count > 12 × 10~9, neutrophils > 80%) will be excluded. Patients will be divided into three categories(blocks) according to their condition: fever only, a swollen and sore throat, and combined fever plus a swollen and sore throat. Patients within each of the three blocks will be further divided into a treatment group and a control group via stratified blocked randomization. The treatment group will be treated with Jinye Baidu granule, and the control group will be treated with Fufang Shuanghua granule. The primary outcome measure will be body temperature recovery time for patients with fever, throat symptom score for patients with a swollen and sore throat, and body temperature recovery time and throat symptom score for patients with combined fever plus a swollen and sore throat. Routine blood testing, urine testing, liver function, kidney function and ECG data of all patients will be collected as safety indices before and after enrollment, and adverse events will be recorded during the whole trial course.CONCLUSION: This study protocol will include stratified block analysis according to patients' symptoms, and identify the accurate clinical indications of Jinye Baidu granule. It will also enable safety evaluation from laboratory indices and adverse events, which will provide reliable evidence for clinical treatment.展开更多
The Oligocene Yacheng Fm contains the most important source rocks that have been confirmed by exploratory wells in the Qiongdongnan Basin.The efficiency of these source rocks is the key to the breakthrough in natural ...The Oligocene Yacheng Fm contains the most important source rocks that have been confirmed by exploratory wells in the Qiongdongnan Basin.The efficiency of these source rocks is the key to the breakthrough in natural gas exploration in the study area.This paper analyzes the hydrocarbon potential of each sag in this basin from the perspective of control of both source rocks and geothermal heat.Two types of source rocks occur in the Yacheng Fm,namely mudstone of transitional facies and mudstone of neritic facies.Both of them are dominated by a kerogen of type-III,followed by type-II.Their organic matter abundances are controlled by the amount of continental clastic input.The mudstone of transitional facies is commonly higher in organic matter abundance,while that of neritic facies is lower.The coal-measure source rocks of transitional facies were mainly formed in such environments as delta plains,coastal plains and barrier tidal flat-marshes.Due to the control of Cenozoic lithosphere extension and influence of neotectonism,the geothermal gradient,terrestrial heat flow value(HFV)and level of thermal evolution are generally high in deep water.The hot setting not only determines the predominance of gas generation in the deep-water sags,but can promote the shallow-buried source rocks in shallow water into oil window to generate oil.In addition to promoting the hydrocarbon generation of source rocks,the high geothermal and high heat flow value can also speed up the cracking of residual hydrocarbons,thus enhancing hydrocarbon generation efficiency and capacity.According to the theory of joint control of source quality and geothermal heat on hydrocarbon generation,we comprehensively evaluate and rank the exploration potentials of major sags in the Qiongdongnan Basin.These sags are divided into 3 types,of which type-I sags including Yanan,Lingshui,Baodao,Ledong and Huaguang are the highest in hydrocarbon exploration potential.展开更多
Input power is an important indicator for the safety testing of electrical and electronic products.Smart toilets have been frequently detected that the actual input power is inconsistent with the nominal power.Researc...Input power is an important indicator for the safety testing of electrical and electronic products.Smart toilets have been frequently detected that the actual input power is inconsistent with the nominal power.Research and analysis show that the accuracy of the input power measurement results of the smart toilet mainly depends on the temperature control principle and power test method of the product.This article mainly discusses the characteristics of product temperature control,the testing method of mean and peak power and its characteristics,which will provide reference for the input power test of the smart toilet,and will improve the accuracy of power measurement.展开更多
As is well known, deep mines are hot. As mining depth increases, the temperature of the surrounding rock also increases. This seriously affects mine safety and production and has restricted the exploitation of deep co...As is well known, deep mines are hot. As mining depth increases, the temperature of the surrounding rock also increases. This seriously affects mine safety and production and has restricted the exploitation of deep coal resources. Therefore, reducing the working face temperature to improve working conditions by controlling these heat hazards is an urgent problem. Considering problems in cooling deep mines both domestically and abroad along with the actual conditions of the Zhangshuanglou coal mine, we propose a HEMS technology that uses heat resources from deep mines in a stepwise manner. HEMS means a high temperature ex-change machinery system. Mine inrush-water is used as a source of cooling. Twice the energy is extracted from the mine inrush water. Heat is used for building heating in the winter and cold water is used for cooling buildings in the summer. This opens a new technology for stepwise utilization of heat energy in deep mines. Energy conservation and reduced pollution, an improved environment and sustainable economic development are realized by this technique. The economic and social effects are obvious and illustrate a good prospect for the application and extension of the method.展开更多
Increase in the integration and package density of aviation electronic equipment provides severe challenge to heat control for electronic components, yet the microchannel radiator offers an efficient method for solvin...Increase in the integration and package density of aviation electronic equipment provides severe challenge to heat control for electronic components, yet the microchannel radiator offers an efficient method for solving the problem of cooling electronic chips and devices. In this paper, 6 micro rectangle channels with different sizes were designed and fabricated; the experiment of single\|phase forced convection heat transfer was conducted with solution of CH\-5OH, the most commonly used coolant for aviation electronic equipment, flowing through those microchannels. The influences of liquid velocity, degree of coolant supercooling, and configuration of microchannels on the heat transfer characteristics were analyzed respectively.展开更多
As the depth of exploitation increases,studies on constitutive models of rock affected by temperature and humidity become very important.Based on the Nishihara model,a visco-elastic-plastic rock model was established ...As the depth of exploitation increases,studies on constitutive models of rock affected by temperature and humidity become very important.Based on the Nishihara model,a visco-elastic-plastic rock model was established by using the coefficients of thermal and humidity expansion,thermal viscosity attenuation,humid viscosity attenuation and acceleration rheology components.We used the definition of a controlled heat circle to explain the model.The results show that the behavior of rock,affected by temperature and humidity,is stable as a function of time when the stress is lower than the first yield stress σS1;the creep rate will increase due to the effect of temperature and humidity when the stress is greater than or equal to σS1;the creep rate will accelerate at an increasing rate when the stress is greater than or equal to the second yield stress σS2,which results in a failure of the roadway.The model derived in this study can completely describe visco-elastic-plastic characteristics and reflects the three stages of rock creep.展开更多
Three-dimensional photonic crystal （PC） heterostructures with high quality are fabricated by using a pressure controlled isothermal heating vertical deposition technique. The formed heterostructures have higher qual...Three-dimensional photonic crystal （PC） heterostructures with high quality are fabricated by using a pressure controlled isothermal heating vertical deposition technique. The formed heterostructures have higher quality, such as deeper band gaps and sharper band edges, than the heterostructures reported so far. Such a significant improvement in quality is due to the introduction of a thin TiO2 buffer layer between the two constitutional PCs. It is revealed that the disorder caused by lattice mismatch is successfully removed if the buffer layer is used once. As a result, the formed heterostructures possess the main features in the band gap of constitutional PCs. The crucial role of the thin buffer layer is also verified by numerical simulations based on the finite-difference time-domain technique.展开更多
In strong solar light, silicon solar panels can heat up by 70℃ and, thereby, loose approximately one third of their efficiencyfor electricity generation. Leaf structures of plants on the other hand, have developed a ...In strong solar light, silicon solar panels can heat up by 70℃ and, thereby, loose approximately one third of their efficiencyfor electricity generation. Leaf structures of plants on the other hand, have developed a series of technological adaptations,which allow them to limit their temperature to 40-45℃ in full sunlight, even if water evaporation is suppressed. This is accomplishedby several strategies such as limitation of leaf size, optimization of aerodynamics in wind, limitation of absorbedsolar energy only to the useful fraction of radiation and by efficient thermal emission. Optical and infrared thermographicmeasurements under a solar simulator and in a streaming channel were used to investigate the corresponding properties of leavesand to identify suitable bionic model systems. Experiments started with the serrated structure of ordinary green leaves distributedover typical twig structures and finally identified the Australian palm tree Licuala ramsayi as a more useful bionic model. Itcombines a large area for solar energy harvesting with optimized aerodynamic properties for cooling and is able to restructureitself as a protection against strong winds. The bionic models, which were constructed and built, are analyzed and discussed.展开更多
Under the carbon peaking and carbon neutrality goals,the aluminum electrolysis industry faces significant challenges in energy conservation,carbon reduction,and environmental protection.Utilizing new energy electricit...Under the carbon peaking and carbon neutrality goals,the aluminum electrolysis industry faces significant challenges in energy conservation,carbon reduction,and environmental protection.Utilizing new energy electricity is one of the most effective ways to reduce carbon emissions in primary aluminum production.This paper addresses the issue of uncontrolled thermal balance in electrolysis cells caused by large fluctuations in current during the absorption of new energy electricity.A multi-field solidification model of the electric-thermal-flow facing the side-controlled heat dissipation structure is constructed.The study investigates the impact of large current fluctuations,heat exchanger structure and different process parameters on the temperature field and the ledge shape of the electrolysis cell.The optimum process and corresponding heat dissipation structure of electrolysis cell under current fluctuations are summarized to provide theoretical guidance for aluminum electrolysis cells in absorbing fluctuating new energy electricity.The results indicate that the aluminum electrolysis cell with controlled heat exchange with standard rectangular carbon blocks,high-insulation irregular carbon blocks(inner lining type 2),and heat-conducting protrusions with a thermal conductivity of 120 W·m^(-1)·K^(−1) can effectively absorb current fluctuations ranging from−20%to+20%within a short period under collaborative control of side thermal regulation and processes.However,when maintaining a+20%current for prolonged periods,the cell may still experience uncontrolled thermal balance.展开更多
In this work,the impact of internal heat integration upon process dynamics and controllability by superposing reactive section onto stripping section,relocating feed locations,and redistributing catalyst within the re...In this work,the impact of internal heat integration upon process dynamics and controllability by superposing reactive section onto stripping section,relocating feed locations,and redistributing catalyst within the reactive section is explored based on a hypothetical ideal reactive distillation system containing an exothermic reaction:A + BC + D.Steady state operation analysis and closed-loop controllability evaluation are carried out by comparing the process designs with and without the consideration of internal heat integration.For superposing reactive section onto stripping section,favorable effect is aroused due to its low sensitivities to the changes in operating condition.For ascending the lower feed stage,somewhat detrimental effect occurs because of the accompanied adverse internal heat integration and strong sensitivity to the changes in operating condition.For descending the upper feed stage,serious detrimental effect happens because of the introduced adverse internal heat integration and strong sensitivity to the changes in operating condition.For redistributing catalyst in the reactive section,fairly small negative influence is aroused by the sensitivity to the changes in operating condition.When reinforcing internal heat integration with a combinatorial use of these three strategies,the decent of the upper feed stage should be avoided in process development.Although the conclusions are derived based on the hypothetical ideal reactive distillation column studied,they are considered to be of general significance to the design and operation of other reactive distillation columns.展开更多
基金supported by the National Key Research and Development Program(Grant No.2021YFE0103000)National Key Research and Development Program(Grant No.2022YFD1900400)Ningxia Hui Autonomous Region Key Research and Development Programme(Grant No.2022BBF02026).
文摘In order to solve the immaturity of decision-making methods in the regulation of winter heating in greenhouses,this study proposed a solution to the problem of greenhouse winter heating regulation using a dynamic programming algorithm.A mathematical model that included indoor environmental state variables,optimization decision variables,and outdoor random variables was established.The temperature is kept close to the expected value and the energy consumption is low.The model predicts the control solution by considering the cost function within the next 10 steps.The two-stage planning method was used to optimize the state of each moment step by step.The temperature control strategy model was obtained by training the relationship between indoor temperature,outdoor temperature,and heating time after optimization using a regression algorithm.Based on a typical Internet of Things(IoT)structure,the greenhouse control system was designed to regulate the optimal control according to the feedback of the current environment.Through testing and verification,the optimized control method could stabilize the temperature near the target value.Compared to the threshold control(threshold interval of 2.0°C)under similar weather conditions,the optimized control method reduced the temperature fluctuation range by 0.9°C and saved 7.83 kW·h of electricity,which is about 14.56%of the total experimental electricity consumption.This shows that the dynamic programming method is feasible for environmental regulation in actual greenhouse production,and further research can be expanded in terms of decision variables and policy models to achieve a more comprehensive,scientific,and precise regulation.
基金supported by the National Science Fund for Distinguished Young Scholars(Grant No.T2225027)the National Key R&D Program of China(Grant No.2023YFA1608902).
文摘Maintaining stable high temperatures under pressure remains a challenge in high-pressure,high-temperature experiments using multi-anvil presses(MAPs).Temperature fluctuations exceeding 10℃ at high pressures are common and particularly problematic with LaCrO_(3) heaters,which can experience significant power fluctuations and even failure due to substantial resistance changes—an issue conventional thyristorcontrolled heating systems cannot effectively manage.To address this limitation,we have developed the Multi-Anvil Stable Temperature controller(MASTer),a high-performance heating system optimized for MAP experiments.MASTer enables precise,high-speed measurement of heating parameters and power output control,incorporating a gentle regulation strategy to enhance stability.It ensures consistent heating across various heater types,including LaCrO_(3),with power fluctuations limited to±0.1 W and temperature fluctuations to within±2℃ in most cases.The design,operating principles,user interface,functionality,and performance of the heating system are discussed in detail.
文摘The article analyses the problem of determining the operating parameters of the district heating substation cooperating with the air heating system in technological air conditioning systems equipped with heat exchangers with high efficiency of heat recovery.Attention was paid to the correct selection of heat exchangers for the heat output balance depending on the heat recovery protection algorithms against a drop in the temperature of the heat transfer surface below 0℃.Critical parameters were determined in Polish climatic conditions,at which the operation of the heat recovery exchanger in the air conditioning system is switched off or limited.It has been proven that the proper functioning of the district heating substation cooperating with the installation of air conditioning with high heat recovery efficiency requires the use of two heat exchangers with different characteristics,equipped with properly selected temperature control systems.The optimal model of cooperation between the technological air conditioning system and the heating substation was also indicated.
基金supported by the National Natural Science Foundation of China(Grant No.52125307)the National Key R&D Program of China(Grant No.2021YFB3501500)the support from the New Cornerstone Science Foundation through the XPLORER PRIZE。
文摘Rapid technological advancements drive miniaturization and high energy density in devices,thereby increasing nanoscale thermal management demands and urging development of higher spatial resolution technologies for thermal imaging and transport research.Here,we introduce an approach to measure nanoscale thermal resistance using in situ inelastic scanning transmission electron microscopy.By constructing unidirectional heating flux with controlled temperature gradients and analyzing electron energy-loss/gain signals under optimized acquisition conditions,nanometer-resolution in mapping phonon apparent temperature is achieved.Thus,interfacial thermal resistance is determined by calculating the ratio of interfacial temperature difference to bulk temperature gradient.This methodology enables direct measurement of thermal transport properties for atomic-scale structural features(e.g.,defects and heterointerfaces),resolving critical structure-performance relationships,providing a useful tool for investigating thermal phenomena at the(sub-)nanoscale.
基金Project 2006CB202200 supported by the National Basic Research Program of Chinathe National Major Project of Ministry of Education (304005)the Program for Changjiang Scholars and Innovative Research Team in University of China (NoIRT0656)
文摘This paper mainly deals with the present situation, characteristics, and countermeasures of cooling in deep mines.Given existing problems in coal mines, a HEMS cooling technology is proposed and has been successfully applied in some mines.Because of long-term exploitation, shallow buried coal seams have become exhausted and most coal mines have had to exploit deep buried coal seams.With the increase in mining depth, the temperature of the surrounding rock also increases, resulting in ever increasing risks of heat hazard during mining operations.At present, coal mines in China can be divided into three groups, i.e., normal temperature mines, middle-to-high temperature mines and high temperature mines, based on our investigation into high temperature coal mines in four provinces and on in-situ studies of several typical mines.The principle of HEMS is to extract cold energy from mine water inrush.Based on the characteristics of strata temperature field and on differences in the amounts of mine water inrush in the Xuzhou mining area, we proposed three models for controlling heat hazard in deep mines:1) the Jiahe model with a moderate source of cold energy;2) the Sanhejian model with a shortage of source of cold energy and a geothermal anomaly and 3) the Zhangshuanglou model with plenty of source of cold energy.The cooling process of HEMS applied in deep coal mine are as follows:1) extract cold energy from mine water inrush to cool working faces;2) use the heat extracted by HEMS to supply heat to buildings and bath water to replace the use of a boiler, a useful energy saving and environmental protection measure.HEMS has been applied in the Jiahe and Sanhejian coal mines in Xuzhou, which enabled the temperature and humidity at the working faces to be well controlled.
基金Project(2018CXNL08) supported by the Fundamental Research Funds for the Central Universities,China。
文摘In order to solve the heat damages in deep mines, a cool-wall cooling technology and its working model are proposed based on the principles of heat absorption and insulation in this paper. During this process, the differential equation of thermal equilibrium for roadway control unit is built, and the heat adsorption control equation of cool-wall cooling system is derived by an integral method, so as to obtain the quantitative relationship among the heat absorption capacity of cooling system, the heat dissipating capacity of surrounding rock and air temperature change. Then, the heat absorption capacity required by air temperature less than the standard value for safety is figured out by section iterative method with the simultaneous solution of heat absorption control equation and the heat dissipation density equation of surrounding rock. Finally, the results show that as the air temperature at the inlet of roadway is 25 ℃, the roadway wall is covered by heat-absorbing plate up to 39% of the area, as well as the cold water is injected into the heat-absorbing plate with a temperature of 20 ℃ and a mass flow of 113.6 kg/s, the air flow temperature rise per kilometer in the roadway can be less than 3 ℃.
基金Supported by the Major State Basic Research and Development Program of People's Republic of China(No.2009CB522902)National Key Technology R&D Program(No.2006BAI12B04-2)+2 种基金National Natural Science Foundation of China(No.81160453)National Natural Science Foundation of China(No.81202854)Jiangxi Key R&D Project
文摘OBJECTIVE:To compare the curative effects of heat-sensitive moxibustion with conventional drugs on chronic persistent asthma and seek a valuable therapy to replaceWestern Medicine.METHODS:The participants in this multi-center,randomized,and controlled study were randomly divided into two groups:group A(n=144),treated with heat-sensitive moxibustion(50 sessions)and group B(n=144),treated with Seretide(salmeterol50μg/fluticasone 250μg,twice a day).The scores of asthma control test(ACT),forced expiratory volume in 1 second(FEV1),peak expiratory flow(PEF),and attack frequency were measured after 15,30,60,and 90 days of treatment.Patients followed up3 and 6 months after treatment.RESULTS:There was a significant difference(P=0.0002)in the ACT score and lung function between the two groups after 3 months of treatment and(P=0.000 03)during the follow-up visits.In addition,heat-sensitive moxibustion reduced attack frequency in the period from inclusion to the6-month follow-up visit.CONCLUSION:This study shows that heat-sensitive moxibustion may have a comparable curative effect toSeretide(salmeterol/fluticasone)on asthma.
文摘Design and control of pressure-swing distillation(PSD) with different heat integration modes for the separation of methyl acetate/methanol azeotrope are explored using Aspen Plus and Aspen Dynamics. First, an optimum steady-state separation configuration conditions are obtained via taking the total annual cost(TAC) or total reboiler heat duty as the objective functions. The results show that about 27.68% and 25.40% saving in TAC can be achieved by the PSD with full and partial heat integration compared to PSD without heat integration. Second,temperature control tray locations are obtained according to the sensitivity criterion and singular value decomposition(SVD) analysis and the single-end control structure is effective based on the feed composition sensitivity analysis. Finally, the comparison of dynamic controllability is made among various control structures for PSD with partial and full heat integration. It is shown that both control structures of composition/temperature cascade and pressure-compensated temperature have a good dynamic response performance for PSD with heat integration facing feed flowrate and composition disturbances. However, PSD with full heat integration performs the poor controllability despite of a little bit of economy.
基金National Natural Science Foundation of China(50506003)
文摘Effective thermal control systems are essential for reliable operation of spacecraft.A dual-driven intelligent combination control strategy is proposed to improve the temperate control and heat flux tracking effects.Both temperature regulation and heat flux tracking errors are employed to generate the final control action;their contributions are adaptively adjusted by a fuzzy fusing policy of control actions.To evaluate the control effects,describe a four-nodal mathematical model for analyzing the dynamic characteristics of the controlled heat pipe space cooling system（HP-SCS） consisting of an aluminum-ammonia heat pipe and a variable-emittance micro-electromechanical-system（MEMS） radiator.This dynamical model calculates the mass flow-rate and condensing pressure of the heat pipe working fluid directly from the systemic nodal temperatures,therefore,it is more suitable for control engineering applications.The closed-loop transient performances of four different control schemes have been numerically investigated.The results conclude that the proposed intelligent combination control scheme not only improves the thermal control effects but also benefits the safe operation of HP-SCS.
基金supported by the Key Technologies R&D Program of Henan Province(Nos.202102210335/212102210026/212102210509/222102220095/212102110218)the Key Scientific and Technological Project(Social Development Field)of Henan Province,China(No.212102310093)+1 种基金the Key Scientific Research Projects of Institutions of Higher Education in Henan Province(No.20B413007)the Science and Technology Program of Henan Province Department of Housing and Urban Rural Construction(No.K-1916).
文摘For purpose of achieving the desired thermal comfort level and reducing the economic cost of maintaining the thermal comfort of green residential building,an energy efficient thermal comfort control strategy based on economic model predictive control(EMPC)for green residential buildings which adopts household heat metering is presented.Firstly,the nonlinear thermal comfort model of heating room is analyzed and obtained.A practical nonlinear thermal comfort prediction model is obtained by using an approximation method.Then,the economic cost function and optimization problem of energy-saving under the necessary thermal comfort requirements are constructed to realize the optimal economic performance of the dynamic process.The energy efficient thermal comfort MPC(EETCMPC)is designed.Finally,the comparison and analysis between EETCMPC and Double-layer Model Predictive Control(DMPC)is simulated.The simulation results reveal that when the clothing insulation is typical,the energy efficiency of EETCMPC is 8.9%and 11.6%,respectively,in the two simulation scenarios.When the clothing insulation varies with temperature,the energy efficiency of EETCMPC is 7.29%and 9.15%,respectively,and the total energy consumption is reduced by about 1.65%and 14.6%,respectively,compared with the typical clothing insulation.The economic performance is improved in the thermal comfort dynamic process of heating room.
基金Supported by the Ninth Scientific Research Foundation of Institute of Basic Research in Clinical Medicine,China Academy of Chinese Medical Sciences(No.Z0406)the Research Project of World Federation of Chinese Medicine Societies(SCEPCM12E001)the Special Research Project of Traditional Chinese Medicines by the State Administration of Traditional Chinese Medicine(No.201507003-8)
文摘OBJECTIVE: To observe the curative effect of Jinye Baidu granule in the treatment of fever and swollen and sore throat caused by wind-warmth lung-heat disease(heat in the lung-wei) to further identify the indications.METHODS: This randomized, double-blind, parallel, controlled trial will include patients with acute upper respiratory infection and wind-warmth lung-heat disease(heat in the lung-wei). Patientswith serious bacterial infection(white blood cell count > 12 × 10~9, neutrophils > 80%) will be excluded. Patients will be divided into three categories(blocks) according to their condition: fever only, a swollen and sore throat, and combined fever plus a swollen and sore throat. Patients within each of the three blocks will be further divided into a treatment group and a control group via stratified blocked randomization. The treatment group will be treated with Jinye Baidu granule, and the control group will be treated with Fufang Shuanghua granule. The primary outcome measure will be body temperature recovery time for patients with fever, throat symptom score for patients with a swollen and sore throat, and body temperature recovery time and throat symptom score for patients with combined fever plus a swollen and sore throat. Routine blood testing, urine testing, liver function, kidney function and ECG data of all patients will be collected as safety indices before and after enrollment, and adverse events will be recorded during the whole trial course.CONCLUSION: This study protocol will include stratified block analysis according to patients' symptoms, and identify the accurate clinical indications of Jinye Baidu granule. It will also enable safety evaluation from laboratory indices and adverse events, which will provide reliable evidence for clinical treatment.
基金National Key Basic Research and Development Plan(973 plans)“Basic research on oil and gas formation and distribution in deep water basins in South China Sea”(No.2009CB219400)Special and Significant Project of National Science and Technology“Key technology of marine oil and gas exploration in deep water area”(No.2008ZX05025 and 2011ZX05025)Investigation and Evaluation Project of National Strategic Petroleum Resource Provinces of the Ministry of Land and Resources(No.XQ-2004-05 and XQ-2007-05).
文摘The Oligocene Yacheng Fm contains the most important source rocks that have been confirmed by exploratory wells in the Qiongdongnan Basin.The efficiency of these source rocks is the key to the breakthrough in natural gas exploration in the study area.This paper analyzes the hydrocarbon potential of each sag in this basin from the perspective of control of both source rocks and geothermal heat.Two types of source rocks occur in the Yacheng Fm,namely mudstone of transitional facies and mudstone of neritic facies.Both of them are dominated by a kerogen of type-III,followed by type-II.Their organic matter abundances are controlled by the amount of continental clastic input.The mudstone of transitional facies is commonly higher in organic matter abundance,while that of neritic facies is lower.The coal-measure source rocks of transitional facies were mainly formed in such environments as delta plains,coastal plains and barrier tidal flat-marshes.Due to the control of Cenozoic lithosphere extension and influence of neotectonism,the geothermal gradient,terrestrial heat flow value(HFV)and level of thermal evolution are generally high in deep water.The hot setting not only determines the predominance of gas generation in the deep-water sags,but can promote the shallow-buried source rocks in shallow water into oil window to generate oil.In addition to promoting the hydrocarbon generation of source rocks,the high geothermal and high heat flow value can also speed up the cracking of residual hydrocarbons,thus enhancing hydrocarbon generation efficiency and capacity.According to the theory of joint control of source quality and geothermal heat on hydrocarbon generation,we comprehensively evaluate and rank the exploration potentials of major sags in the Qiongdongnan Basin.These sags are divided into 3 types,of which type-I sags including Yanan,Lingshui,Baodao,Ledong and Huaguang are the highest in hydrocarbon exploration potential.
文摘Input power is an important indicator for the safety testing of electrical and electronic products.Smart toilets have been frequently detected that the actual input power is inconsistent with the nominal power.Research and analysis show that the accuracy of the input power measurement results of the smart toilet mainly depends on the temperature control principle and power test method of the product.This article mainly discusses the characteristics of product temperature control,the testing method of mean and peak power and its characteristics,which will provide reference for the input power test of the smart toilet,and will improve the accuracy of power measurement.
基金Financial support for this project, provided by the National Basic Research Program of China (No. 2006CB202200)the National Major Project of Ministry of Education (No.304005) the Program for Changjiang Scholars and Innovative Research Team in University of China (No.IRT0656), is gratefully acknowledged
文摘As is well known, deep mines are hot. As mining depth increases, the temperature of the surrounding rock also increases. This seriously affects mine safety and production and has restricted the exploitation of deep coal resources. Therefore, reducing the working face temperature to improve working conditions by controlling these heat hazards is an urgent problem. Considering problems in cooling deep mines both domestically and abroad along with the actual conditions of the Zhangshuanglou coal mine, we propose a HEMS technology that uses heat resources from deep mines in a stepwise manner. HEMS means a high temperature ex-change machinery system. Mine inrush-water is used as a source of cooling. Twice the energy is extracted from the mine inrush water. Heat is used for building heating in the winter and cold water is used for cooling buildings in the summer. This opens a new technology for stepwise utilization of heat energy in deep mines. Energy conservation and reduced pollution, an improved environment and sustainable economic development are realized by this technique. The economic and social effects are obvious and illustrate a good prospect for the application and extension of the method.
文摘Increase in the integration and package density of aviation electronic equipment provides severe challenge to heat control for electronic components, yet the microchannel radiator offers an efficient method for solving the problem of cooling electronic chips and devices. In this paper, 6 micro rectangle channels with different sizes were designed and fabricated; the experiment of single\|phase forced convection heat transfer was conducted with solution of CH\-5OH, the most commonly used coolant for aviation electronic equipment, flowing through those microchannels. The influences of liquid velocity, degree of coolant supercooling, and configuration of microchannels on the heat transfer characteristics were analyzed respectively.
基金provided by the National Basic Research Program of China (No.2010CB226804)
文摘As the depth of exploitation increases,studies on constitutive models of rock affected by temperature and humidity become very important.Based on the Nishihara model,a visco-elastic-plastic rock model was established by using the coefficients of thermal and humidity expansion,thermal viscosity attenuation,humid viscosity attenuation and acceleration rheology components.We used the definition of a controlled heat circle to explain the model.The results show that the behavior of rock,affected by temperature and humidity,is stable as a function of time when the stress is lower than the first yield stress σS1;the creep rate will increase due to the effect of temperature and humidity when the stress is greater than or equal to σS1;the creep rate will accelerate at an increasing rate when the stress is greater than or equal to the second yield stress σS2,which results in a failure of the roadway.The model derived in this study can completely describe visco-elastic-plastic characteristics and reflects the three stages of rock creep.
基金Project supported by the National Natural Science Foundation of China (Grant No 10674051)the Program for Innovative Research Team of the Higher Education of Guangdong Province,China (Grant No 06CXTD005)the Key Program of Extracurricular Research in South China Normal University (SCNU),China (Grant No 08GDKC02)
文摘Three-dimensional photonic crystal （PC） heterostructures with high quality are fabricated by using a pressure controlled isothermal heating vertical deposition technique. The formed heterostructures have higher quality, such as deeper band gaps and sharper band edges, than the heterostructures reported so far. Such a significant improvement in quality is due to the introduction of a thin TiO2 buffer layer between the two constitutional PCs. It is revealed that the disorder caused by lattice mismatch is successfully removed if the buffer layer is used once. As a result, the formed heterostructures possess the main features in the band gap of constitutional PCs. The crucial role of the thin buffer layer is also verified by numerical simulations based on the finite-difference time-domain technique.
文摘In strong solar light, silicon solar panels can heat up by 70℃ and, thereby, loose approximately one third of their efficiencyfor electricity generation. Leaf structures of plants on the other hand, have developed a series of technological adaptations,which allow them to limit their temperature to 40-45℃ in full sunlight, even if water evaporation is suppressed. This is accomplishedby several strategies such as limitation of leaf size, optimization of aerodynamics in wind, limitation of absorbedsolar energy only to the useful fraction of radiation and by efficient thermal emission. Optical and infrared thermographicmeasurements under a solar simulator and in a streaming channel were used to investigate the corresponding properties of leavesand to identify suitable bionic model systems. Experiments started with the serrated structure of ordinary green leaves distributedover typical twig structures and finally identified the Australian palm tree Licuala ramsayi as a more useful bionic model. Itcombines a large area for solar energy harvesting with optimized aerodynamic properties for cooling and is able to restructureitself as a protection against strong winds. The bionic models, which were constructed and built, are analyzed and discussed.
基金supported by the National Key Research and Development Program of China(No.2022YFB3304902)the NSFC Joint Fund of China(No.U2202253)+2 种基金the 2023 Cutting-Edge Interdisciplinary Project of Central South University,China(No.2023QYJC007)Yunnan Province Science and Technology Planning Project of China(No.202202AB080017)the Key Fund of the National Natural Science Foundation of China(No.62133016).
文摘Under the carbon peaking and carbon neutrality goals,the aluminum electrolysis industry faces significant challenges in energy conservation,carbon reduction,and environmental protection.Utilizing new energy electricity is one of the most effective ways to reduce carbon emissions in primary aluminum production.This paper addresses the issue of uncontrolled thermal balance in electrolysis cells caused by large fluctuations in current during the absorption of new energy electricity.A multi-field solidification model of the electric-thermal-flow facing the side-controlled heat dissipation structure is constructed.The study investigates the impact of large current fluctuations,heat exchanger structure and different process parameters on the temperature field and the ledge shape of the electrolysis cell.The optimum process and corresponding heat dissipation structure of electrolysis cell under current fluctuations are summarized to provide theoretical guidance for aluminum electrolysis cells in absorbing fluctuating new energy electricity.The results indicate that the aluminum electrolysis cell with controlled heat exchange with standard rectangular carbon blocks,high-insulation irregular carbon blocks(inner lining type 2),and heat-conducting protrusions with a thermal conductivity of 120 W·m^(-1)·K^(−1) can effectively absorb current fluctuations ranging from−20%to+20%within a short period under collaborative control of side thermal regulation and processes.However,when maintaining a+20%current for prolonged periods,the cell may still experience uncontrolled thermal balance.
基金Supported by the National Natural Science Foundation of China(21076015,21376018,21576014)the Fundamental Research Funds for the Central Universities(ZY1503)
文摘In this work,the impact of internal heat integration upon process dynamics and controllability by superposing reactive section onto stripping section,relocating feed locations,and redistributing catalyst within the reactive section is explored based on a hypothetical ideal reactive distillation system containing an exothermic reaction:A + BC + D.Steady state operation analysis and closed-loop controllability evaluation are carried out by comparing the process designs with and without the consideration of internal heat integration.For superposing reactive section onto stripping section,favorable effect is aroused due to its low sensitivities to the changes in operating condition.For ascending the lower feed stage,somewhat detrimental effect occurs because of the accompanied adverse internal heat integration and strong sensitivity to the changes in operating condition.For descending the upper feed stage,serious detrimental effect happens because of the introduced adverse internal heat integration and strong sensitivity to the changes in operating condition.For redistributing catalyst in the reactive section,fairly small negative influence is aroused by the sensitivity to the changes in operating condition.When reinforcing internal heat integration with a combinatorial use of these three strategies,the decent of the upper feed stage should be avoided in process development.Although the conclusions are derived based on the hypothetical ideal reactive distillation column studied,they are considered to be of general significance to the design and operation of other reactive distillation columns.
