Accurate water level measurement in nuclear reactors,particularly in PWRs(pressurized water reactors)and BWRs(boiling water reactors),is essential for ensuring the safety and efficiency of reactor operations.K-type HJ...Accurate water level measurement in nuclear reactors,particularly in PWRs(pressurized water reactors)and BWRs(boiling water reactors),is essential for ensuring the safety and efficiency of reactor operations.K-type HJTCs(heated junction thermocouples)are widely used for this purpose due to their ability to withstand extreme temperatures and radiation conditions.This article explores the role of HJTCs in reactor water level measurement and compares the performance of 2-wire and 3-wire connections.While the 2-wire connection is simple and cost-effective,it can introduce measurement inaccuracies due to wire resistance.In contrast,the 3-wire connection compensates for lead resistance,offering more precise and reliable measurements,particularly in long-distance applications.This paper discusses the operational considerations of these wiring configurations in the context of nuclear reactors and highlights the importance of choosing the appropriate connection type to optimize safety and measurement accuracy in PWR and BWR reactors.展开更多
The temperature fluctuation caused by thermal striping phenomena of hot and cold fluids mixing results in cyclical thermal stress fatigue failure of the pipe wall. Mean temperature difference between hot and cold flui...The temperature fluctuation caused by thermal striping phenomena of hot and cold fluids mixing results in cyclical thermal stress fatigue failure of the pipe wall. Mean temperature difference between hot and cold fluids was often used as thermal load in previous analysis of thermal fatigue failure, thereby the influences of the amplitude and frequency of temperature fluctuation on thermal fatigue failure were neglected. Based on the mechanism of flow and heat transfer which induces thermal fatigue, the turbulent mixing of hot and cold water in a tee junction is simulated with FLUENT platform by using the Large-eddy simulation（LES） turbulent flow model with the sub-grid scale（SGS） model of Smagorinsky-Lilly（SL） to capture the amplitude and frequency of temperature fluctuation. In a simulation case, hot water with temperature of 343.48 K and velocity of 0.15 m/s enters the horizontal main duct with the side length of 100 mm, while cold water with temperature of 296.78 K and velocity of 0.3 m/s enters the vertical branch duct with the side length of 50 mm. The numerical results show that the mean and fluctuating temperatures are in good agreement with the previous experimental data, which describes numerical simulation with high reliability and accuracy; the power spectrum density（PSD） on top wall is higher than that on bottom wall（as the frequency less than 1 Hz）, while the PSD on bottom wall is relatively higher than that on top wall （as the frequency of 1-10Hz）. The temperature fluctuations in full mixing region of the tee junction can be accurately captured by LES and can provide the theoretical basis for the thermal stress and thermal fatigue analyses.展开更多
In order to study the role of printed circuit board(PCB)in high-power LED heat dissipation,a simple model of high-power LED lamp was designed.According to this lamp model,some thermal performances such as thermal resi...In order to study the role of printed circuit board(PCB)in high-power LED heat dissipation,a simple model of high-power LED lamp was designed.According to this lamp model,some thermal performances such as thermal resistances of four types of PCB and the changes of LED junction temperature were tested under three different working currents.The obtained results indicate that LED junction temperature can not be lowered significantly with the decreasing thermal resistance of PCB.However,PCB with low thermal resistance can be matched with smaller volume heat sink,so it is hopeful to reduce the size,weight and cost of LED lamp.展开更多
文摘Accurate water level measurement in nuclear reactors,particularly in PWRs(pressurized water reactors)and BWRs(boiling water reactors),is essential for ensuring the safety and efficiency of reactor operations.K-type HJTCs(heated junction thermocouples)are widely used for this purpose due to their ability to withstand extreme temperatures and radiation conditions.This article explores the role of HJTCs in reactor water level measurement and compares the performance of 2-wire and 3-wire connections.While the 2-wire connection is simple and cost-effective,it can introduce measurement inaccuracies due to wire resistance.In contrast,the 3-wire connection compensates for lead resistance,offering more precise and reliable measurements,particularly in long-distance applications.This paper discusses the operational considerations of these wiring configurations in the context of nuclear reactors and highlights the importance of choosing the appropriate connection type to optimize safety and measurement accuracy in PWR and BWR reactors.
基金supported by National Natural Science Foundation of China(Grant No. 50906002)National Basic Research Program of China(973 Program, Grant No. 2011CB706900)Beijing Novel Program of China(Grant No. 2008B16)
文摘The temperature fluctuation caused by thermal striping phenomena of hot and cold fluids mixing results in cyclical thermal stress fatigue failure of the pipe wall. Mean temperature difference between hot and cold fluids was often used as thermal load in previous analysis of thermal fatigue failure, thereby the influences of the amplitude and frequency of temperature fluctuation on thermal fatigue failure were neglected. Based on the mechanism of flow and heat transfer which induces thermal fatigue, the turbulent mixing of hot and cold water in a tee junction is simulated with FLUENT platform by using the Large-eddy simulation（LES） turbulent flow model with the sub-grid scale（SGS） model of Smagorinsky-Lilly（SL） to capture the amplitude and frequency of temperature fluctuation. In a simulation case, hot water with temperature of 343.48 K and velocity of 0.15 m/s enters the horizontal main duct with the side length of 100 mm, while cold water with temperature of 296.78 K and velocity of 0.3 m/s enters the vertical branch duct with the side length of 50 mm. The numerical results show that the mean and fluctuating temperatures are in good agreement with the previous experimental data, which describes numerical simulation with high reliability and accuracy; the power spectrum density（PSD） on top wall is higher than that on bottom wall（as the frequency less than 1 Hz）, while the PSD on bottom wall is relatively higher than that on top wall （as the frequency of 1-10Hz）. The temperature fluctuations in full mixing region of the tee junction can be accurately captured by LES and can provide the theoretical basis for the thermal stress and thermal fatigue analyses.
基金Special Fund Project of Science and Technology Innovation of Dongli District(21090302)Research Projectof Applied Basic and Front Technologies of Tianjin(10JCZDJC15400)
文摘In order to study the role of printed circuit board(PCB)in high-power LED heat dissipation,a simple model of high-power LED lamp was designed.According to this lamp model,some thermal performances such as thermal resistances of four types of PCB and the changes of LED junction temperature were tested under three different working currents.The obtained results indicate that LED junction temperature can not be lowered significantly with the decreasing thermal resistance of PCB.However,PCB with low thermal resistance can be matched with smaller volume heat sink,so it is hopeful to reduce the size,weight and cost of LED lamp.
