Radiators and heat exchangers play a key role in the long-term and stable operation of the equipment. The emergence of additive manufacturing technology has released the freedom of design, enabling many innovative str...Radiators and heat exchangers play a key role in the long-term and stable operation of the equipment. The emergence of additive manufacturing technology has released the freedom of design, enabling many innovative structures of radiators and heat exchangers to be manufactured. The paper reviews the application of additive manufacturing in new radiators and heat exchangers. The technology of additive manufacturing boosts the development of new radiators and heat exchangers, which improves heat dissipation performance and heat exchange efficiency. This paper will provide a new idea and method for the development of radiators and heat exchangers via the application of additive manufacturing.展开更多
The HTS current leads of superconducting magnets for large scale fusion devices and high energy particle colliders can reduce the power consumption for cooling by 2/3 compared with conventional leads. The resistive se...The HTS current leads of superconducting magnets for large scale fusion devices and high energy particle colliders can reduce the power consumption for cooling by 2/3 compared with conventional leads. The resistive sections of high-rated current leads are usually made of a heat exchanger cooled by gas flow. The supply of the cooling mass flow incurs more than 90% of the cooling cost for the HTS leads. The mass flow rate requirement depends not only on the length and material of the resistive heat exchanger, but also on the heat transfer coefficient and HEX surface, the joint resistance at the cold end of a sheet-stack HEX with a larger specific presented in the paper. The test results of efficiency can be achieved. and its cooling approach. The design and operation surface and a much smaller hydraulic diameter are an HTS lead optimized for 8 kA show that a 98.4%展开更多
This paper presents a thermophysical study approach for a pure environmental control system(ECS),incorporating the geometric dimensions of heat exchangers,ram air duct,and air cycle machine(ACM)blades of the Sabreline...This paper presents a thermophysical study approach for a pure environmental control system(ECS),incorporating the geometric dimensions of heat exchangers,ram air duct,and air cycle machine(ACM)blades of the Sabreliner’s environmental control system.Real flight scenarios are simulated by considering flight input variables such as altitude,aircraft speed,compression ratio of the air cycle machine,and the mass flow rate of bleed air.The study evaluates the coefficient of performance(COP)of the environmental control system,the heat exchanger efficiencies,and the work distribution of the air cycle machine based on five flight scenarios,with a particular focus on considering the effects of humidity on environmental control system performance.The results demonstrate that at cruising altitude(11,000 m),air humidity conditions allow an increase in the COP of around 9.28%compared to dry conditions.Conversely,on land,humidity conditions reduce the performance by 4.26%compared to dry conditions.It was also found that the effects of humidity at high aircraft speeds become negligible.In general terms,the humidity conditions in the air proved to have positive effects on the environmental control system’s performance but negative effects on the heat exchanger efficiencies,reducing them by 0.22%.Additionally,land conditions reflect significant improvements in performance when the compression ratio of the air cycle machine is varied.Furthermore,in the work distribution of the air cycle machine,humidity conditions were demonstrated to consume 2.91%less work fromthe turbine compared to dry conditions.展开更多
Elliptical fin-and-tube heat exchangers are commonly used in air conditioning,heating,refrigeration industries,and ventilation.This study numerically investigates the effect of vortex generators on the performance of ...Elliptical fin-and-tube heat exchangers are commonly used in air conditioning,heating,refrigeration industries,and ventilation.This study numerically investigates the effect of vortex generators on the performance of elliptical fin-and-tube heat exchanger under different inclination angles.In this study,air flow that is in the transitional regime is selected as the working fluid.Reynolds numbers at the inlet are varied in a range of 1300 to 2100,and the shear stress transport k-ωturbulence model is selected to solve the non-closure of basic turbulence equations.The ellipticity ratios of the tubes which are used for the analysis are between 0.6 and 1.0,and the inclination angles are varied from 15°to 75°.The effects of different inclination angles of vortex generators on the Colburn factor j,friction factor f,and efficiency index j/f are analyzed.The friction and Colburn factors are observed to increase with increasing vortex generator inclination angles.It is found that the efficiency factors for a 15°vortex generator inclination angle at 0.6,0.7,0.8,and 0.9 ellipticity ratios improve compared to the corresponding cases with no vortex generator.However,the vortex generator cannot improve the efficiency factor of the circular tube heat exchanger.The 3 D CFD method employed by this study has great potential for use in optimally designing the arrangement of the vortex generators to enhance the performance of heat exchangers.展开更多
文摘Radiators and heat exchangers play a key role in the long-term and stable operation of the equipment. The emergence of additive manufacturing technology has released the freedom of design, enabling many innovative structures of radiators and heat exchangers to be manufactured. The paper reviews the application of additive manufacturing in new radiators and heat exchangers. The technology of additive manufacturing boosts the development of new radiators and heat exchangers, which improves heat dissipation performance and heat exchange efficiency. This paper will provide a new idea and method for the development of radiators and heat exchangers via the application of additive manufacturing.
文摘The HTS current leads of superconducting magnets for large scale fusion devices and high energy particle colliders can reduce the power consumption for cooling by 2/3 compared with conventional leads. The resistive sections of high-rated current leads are usually made of a heat exchanger cooled by gas flow. The supply of the cooling mass flow incurs more than 90% of the cooling cost for the HTS leads. The mass flow rate requirement depends not only on the length and material of the resistive heat exchanger, but also on the heat transfer coefficient and HEX surface, the joint resistance at the cold end of a sheet-stack HEX with a larger specific presented in the paper. The test results of efficiency can be achieved. and its cooling approach. The design and operation surface and a much smaller hydraulic diameter are an HTS lead optimized for 8 kA show that a 98.4%
文摘This paper presents a thermophysical study approach for a pure environmental control system(ECS),incorporating the geometric dimensions of heat exchangers,ram air duct,and air cycle machine(ACM)blades of the Sabreliner’s environmental control system.Real flight scenarios are simulated by considering flight input variables such as altitude,aircraft speed,compression ratio of the air cycle machine,and the mass flow rate of bleed air.The study evaluates the coefficient of performance(COP)of the environmental control system,the heat exchanger efficiencies,and the work distribution of the air cycle machine based on five flight scenarios,with a particular focus on considering the effects of humidity on environmental control system performance.The results demonstrate that at cruising altitude(11,000 m),air humidity conditions allow an increase in the COP of around 9.28%compared to dry conditions.Conversely,on land,humidity conditions reduce the performance by 4.26%compared to dry conditions.It was also found that the effects of humidity at high aircraft speeds become negligible.In general terms,the humidity conditions in the air proved to have positive effects on the environmental control system’s performance but negative effects on the heat exchanger efficiencies,reducing them by 0.22%.Additionally,land conditions reflect significant improvements in performance when the compression ratio of the air cycle machine is varied.Furthermore,in the work distribution of the air cycle machine,humidity conditions were demonstrated to consume 2.91%less work fromthe turbine compared to dry conditions.
基金the financial support by National Natural Science Foundation of China(Grant No.51879201,U1867215)。
文摘Elliptical fin-and-tube heat exchangers are commonly used in air conditioning,heating,refrigeration industries,and ventilation.This study numerically investigates the effect of vortex generators on the performance of elliptical fin-and-tube heat exchanger under different inclination angles.In this study,air flow that is in the transitional regime is selected as the working fluid.Reynolds numbers at the inlet are varied in a range of 1300 to 2100,and the shear stress transport k-ωturbulence model is selected to solve the non-closure of basic turbulence equations.The ellipticity ratios of the tubes which are used for the analysis are between 0.6 and 1.0,and the inclination angles are varied from 15°to 75°.The effects of different inclination angles of vortex generators on the Colburn factor j,friction factor f,and efficiency index j/f are analyzed.The friction and Colburn factors are observed to increase with increasing vortex generator inclination angles.It is found that the efficiency factors for a 15°vortex generator inclination angle at 0.6,0.7,0.8,and 0.9 ellipticity ratios improve compared to the corresponding cases with no vortex generator.However,the vortex generator cannot improve the efficiency factor of the circular tube heat exchanger.The 3 D CFD method employed by this study has great potential for use in optimally designing the arrangement of the vortex generators to enhance the performance of heat exchangers.
