A wedge-shaped planar mass-flow hopper system was modelled using stress-field theory as found in the literature, The authors present governing equations for stress and velocity fields under a radial- flow assumption i...A wedge-shaped planar mass-flow hopper system was modelled using stress-field theory as found in the literature, The authors present governing equations for stress and velocity fields under a radial- flow assumption in a converging hopper. The velocity in the silo above the hopper is modelled as plug flow, Two set-ups are modelled, one where powder layers in the hopper are assumed to be flat, and the second in which the layers are heaped at some characteristic angle, The ejection times and residence-time distributions are calculated and presented for a range of heap angles. For realistic heap angles, the spread of the residence-time distribution decreases with increasing heap angle; in one case, the spread is halved to a well-defined limit. At this limit （the critical heap angle） the geometry of the hopper can be optimised to minimise the spread of the residence-time distribution, and hence to minimise predicted mixing in the system. We present examples of curves for a variety of parameters that minimise the predicted mixing in the hopper-silo system.展开更多
The capillary process coexists with gravity flow within leaching heap due to the dual-porosity structure. Capillary rise is responsible for the mineral dissolution in fine particle zones and interior coarse rock. The ...The capillary process coexists with gravity flow within leaching heap due to the dual-porosity structure. Capillary rise is responsible for the mineral dissolution in fine particle zones and interior coarse rock. The effect of particle size and heap porosity on the capillary process was investigated through a series of column tests. Macropore of the ore heap was identified, and its capillary rise theory analysis was put forward. Two groups of ore particles, mono-size and non-uniform, were selected for the capillary rise test. The result shows that particle size has an inverse effect on the capillary ultimate height, and smaller particles exhibit higher capillary rise. Meanwhile, the poorly graded group exhibits small rise height and velocity, while the capillary rise in the well-graded particles is much greater. The relationship between porosity and fitting parameters of capillary rise was obtained. Low porosity and high surface tension lead to higher capillary height of the fine gradation. Moisture content increases with the capillary rise level going up, the relationship between capillary height and moisture content was obtained.展开更多
The images of granular ore media were captured by X-ray CT scanner. Combined with digital image processing and finite element techniques, the three-dimensional geometrical model, which represents the realistic pore st...The images of granular ore media were captured by X-ray CT scanner. Combined with digital image processing and finite element techniques, the three-dimensional geometrical model, which represents the realistic pore structure of the media, was constructed. With this model, three dimensional pore scale fluid flow among particles was simulated. Then the distributions of fluid flow velocity and pressure were analyzed and the hydraulic conductivity was calculated. The simulation results indicate the fluid flow behaviors are mainly dominated by the volume and topological structure of pore space. There exist obvious preferential flow and leaching blind zones simultaneously in the medium. The highest velocities generally occur in those narrow pores with high pressure drops. The hydraulic conductivity obtained by simulation is the same order of magnitude as the laboratory test result, which denotes the validity of the model. The pore-scale and macro-scale are combined and the established geometrical model can be used for the simulations of other phenomena during heap leaching process.展开更多
Compared with the traditional pyrometallurgical process, copper bioleaching has distinctive advantages of high efficiency and lower cost, enabling efficiently extracts of valuable metal resources from copper sulfides....Compared with the traditional pyrometallurgical process, copper bioleaching has distinctive advantages of high efficiency and lower cost, enabling efficiently extracts of valuable metal resources from copper sulfides. Moreover, during long-term industrial applications of bioleaching, many regulatory enhancements and technological methods are used to accelerate the interfacial reactions. With advances in microbial genetic and sequencing technologies, bacterial communities and their mechanisms in bioleaching systems have been revealed gradually. The bacterial proliferation and dissolution of sulfide ores by a bacterial community depends on the pH, temperature, oxygen, reaction product regulation, additives, and passivation substances, among other factors. The internal relationship among the influencing factors and the succession of microorganism diversity are discussed and reviewed in this paper. This paper is intended to provide a good reference for studies related to enhanced bioleaching.展开更多
Round Top Mountain in Hudspeth County, west Texas, USA is a surface-exposed rhyolite intrusion enriched in Y and heavy rare earth elements （HREEs）, as well as Nb, Ta, Be, Li, F, Sn, Rb, Th, and U. The massive tonnag...Round Top Mountain in Hudspeth County, west Texas, USA is a surface-exposed rhyolite intrusion enriched in Y and heavy rare earth elements （HREEs）, as well as Nb, Ta, Be, Li, F, Sn, Rb, Th, and U. The massive tonnage, estimated at well over 1 billion tons, of the deposit makes it a target for recovery of valuable yttrium and HREEs （YHREEs）, and possibly other scarce ele-ments. Because of the extremely fine grain size of the mineralized rhyolite matrix, it has not been clear which minerals host the YHREEs and in what proportions. REE-bearing minerals reported in the deposit included bastn？site-Ce, Y-bearing fluorite, xeno-time-Y, zircon, aeschynite-Ce, a Ca-Th-Pb fluoride, and possibly ancylite-La and cerianite-Ce. Extended X-ray absorption fine struc-ture （EXAFS） indicated that virtually all of the yttrium, a proxy for the HREEs, resided in a coordination in the fluorite-type crystal structure, rather than those in the structures of bastn？site-Ce and xenotime-Y. The YREE grade of the Round Top deposit was just over 0.05%, with 72%of this consisting of YHREEs. This grade was in the range of the South China ionic clay deposits that supply essentially all of the world’s YHREEs. Because the host Y-bearing fluorite is soluble in dilute sulfuric acid at room temperature, a heap leaching of the deposit appeared feasible, aided by the fact that 90%-95%of the rock consists of unreactive and insoluble feld-spars and quartz. The absence of overburden, remarkable consistency of mineralization grade throughout the massive rhyolite, prox-imity （a few km） to a US interstate highway, major rail systems and gas and electricity, temperate climate, and stable political location in the world’s largest economy all enhanced the potential economic appeal of Round Top.展开更多
This study studied the characteristics and source apportionment of heavy metal pollution in the agricultural soil surrounding a gangue coal heap in Chongqing,China by using absolute principal component scores-multiple...This study studied the characteristics and source apportionment of heavy metal pollution in the agricultural soil surrounding a gangue coal heap in Chongqing,China by using absolute principal component scores-multiple linear regression(APCSMLR)model and positive matrix factorization(PMF)model.The applicability of the models was compared in the assessment of source apportionment.The results showed that the average contents of Cd,Hg,As,Pb,Cr,Cu,Ni,and Zn in the surface soil were 0.46,0.14,9.66,31.2,127,95.6,76.0,and 158 mg/kg,respectively.Combined with the spatial distribution and correlation analyses,the results of source apportionment were consistent for both the APCSMLR and PMF models.Cd,Hg,As,and Pb were mainly affected by the gangue heap accumulation,with respective contributions of 74.6%,79.4%,69.1%,and 67.2%based on the APCS-MLR model and respective contributions of 69.7%,60.7%,57.4%,and 41.9%based on the PMF model.Ni and Zn were mainly affected by industrial and agricultural activities,while Cr and Cu were mainly affected by natural factors.The results of the source apportionment were approximately consistent between the APCS-MLR and PMF models.The combined application of the two receptor models can make the results of source apportionment more comprehensive,accurate,and reliable.展开更多
Heap bioleaching is one of the most clean and economical processes for recovery of low-grade and complex ores, because the sulfide minerals are natural habitats for acidophiles capable of iron-and sulfur-oxidation. Th...Heap bioleaching is one of the most clean and economical processes for recovery of low-grade and complex ores, because the sulfide minerals are natural habitats for acidophiles capable of iron-and sulfur-oxidation. The most exciting advances in heap bioleaching are occurring in the field of microbiology, especially with the development of advanced molecular biology approaches. These chemolithotrophic microorganisms living in the acid mine environment fix N_2 and CO_2 and obtain energy for growth from soluble ferrous iron and reduced inorganic sulfur compounds during oxidation of sulfide minerals. The ferric iron as oxidant and sulfuric acid are a result of microbial activity and provide favorable conditions for the dissolution of sulfide minerals. Various microbial consortia were applied successfully in commercial bioleaching heaps around the world, and microbial community and activity were adapted related to the local climatic conditions, ore characteristics and engineering configuration. This review focuses on diversity of bioleaching microbes, their role in heap bioleaching processes, their community structure and function in industrial heaps and the relation to the ore characteristics and the engineering configuration, to give implications for optimizing leaching efficiency of heap bioleaching.展开更多
To design heap biooxidation process,it is necessary to understand its internal rules.The heap biooxidation of gold ore from Anhui province was researched in this study.The results showed that the main microorganisms i...To design heap biooxidation process,it is necessary to understand its internal rules.The heap biooxidation of gold ore from Anhui province was researched in this study.The results showed that the main microorganisms in the heap were A.ferrooxidans,F.acidiphilum and L.ferrodiazotrophum.Under their combined action,gold leaching extent rose from 35.62%to 78.08%in 80 d.Boltzmann model matches the actual oxidation effect better and the model equations were obtained.The model predicted that the oxidation extents of arsenic and sulfur are 58.577%and 42.122%after one year,and the gold leaching extent was 80.40%.The arsenic and sulfur oxidation extents,and gold leaching extent were all linearly correlated.It is more reliable to predict gold leaching extent by sulfur oxidation extent.These results provided good guidance for practical application in the actual production.展开更多
Bioleaching of chalcopyrite often encountered the formation of passivation layer, which inhibited the leaching process and resulted in a low leaching rate. This inhibitory effect can be eliminated by thermophilic biol...Bioleaching of chalcopyrite often encountered the formation of passivation layer, which inhibited the leaching process and resulted in a low leaching rate. This inhibitory effect can be eliminated by thermophilic biole- aching. The industrial test of BioCOP technology based on thermophiles was successfully completed, which confirmed the feasibility of chalcopyrite bioleaching. However, industrial leaching rate of chalcopyrite heap bioleaching is lower. This paper described the development status and industrial test of chalcopyrite heap bioleaching technology. The reasons for the lower efficiency of chalcopyrite heap bioleaching were analyzed. The strategies for successful chalcopyrite heap bioleaching were proposed.展开更多
Based on the momentum and mass conservation equations, a comprehensive model of heap bioleaching process is developed to investigate the interaction between chemical reactions, solution flow, gas flow, and solute tran...Based on the momentum and mass conservation equations, a comprehensive model of heap bioleaching process is developed to investigate the interaction between chemical reactions, solution flow, gas flow, and solute transport within the leaching system. The governing equations are solved numerically using the COMSOL Multiphysics software for the coupled reactive flow and solute transport at micro-scale, meso-scale and macro-scale levels. At or near the surface of ore particle, the acid concentration is relatively higher than that in the central area, while the concentration gradient decreases after 72 d of leaching. The flow simulation between ore particles by combining X-ray CT technology shows that the highest velocity in narrow pore reaches 0.375 m/s. The air velocity within the dump shows that the velocity near the top and side surface is relatively high, which leads to the high oxygen concentration in that area. The coupled heat transfer and liquid flow process shows that the solution can act as an effective remover from the heap, dropping the highest temperature from 60 to 38 ℃. The reagent transfer coupled with solution flow is also analyzed. The results obtained allow us to obtain a better understanding of the fundamental physical phenomenon of the bioleaching process.展开更多
To explore a new evaluation method for spontaneous combustion tendency of different areas in sulfide ore heap, ore samples from a pyrite mine in China were taken as experimental materials, and the temperature variatio...To explore a new evaluation method for spontaneous combustion tendency of different areas in sulfide ore heap, ore samples from a pyrite mine in China were taken as experimental materials, and the temperature variations of the measuring points of simulated ore heap were measured. Combined with wavelet transform and nonlinear parameters extraction, a new method for spontaneous combustion tendency of different areas in sulfide ore heap based on nonlinear parameters was proposed and its reliability was verified by field test. The results indicate that temperature field evolution of the simulated ore heap presents significant spatial difference during self-heating process. Area with the maximum increasing extent of temperature in sulfide ore heap changes notably with the proceeding of self-heating reaction. Self-heating of sulfide ore heap is a chaotic evolution process, which means that it is feasible to evaluate spontaneous combustion tendency of different areas by nonlinear analysis method. There is a relatively strong correlation between the maximum Lyapunov exponent and spontaneous combustion tendency with the correlation coefficient of 0.9792. Furthermore, the sort of the maximum Lyapunov exponent is consistent with that of spontaneous combustion tendency. Therefore, spontaneous combustion tendency of different areas in sulfide ore heap can be evaluated by means of the maximum Lyapunov exponent method.展开更多
文摘A wedge-shaped planar mass-flow hopper system was modelled using stress-field theory as found in the literature, The authors present governing equations for stress and velocity fields under a radial- flow assumption in a converging hopper. The velocity in the silo above the hopper is modelled as plug flow, Two set-ups are modelled, one where powder layers in the hopper are assumed to be flat, and the second in which the layers are heaped at some characteristic angle, The ejection times and residence-time distributions are calculated and presented for a range of heap angles. For realistic heap angles, the spread of the residence-time distribution decreases with increasing heap angle; in one case, the spread is halved to a well-defined limit. At this limit （the critical heap angle） the geometry of the hopper can be optimised to minimise the spread of the residence-time distribution, and hence to minimise predicted mixing in the system. We present examples of curves for a variety of parameters that minimise the predicted mixing in the hopper-silo system.
基金Project(51374035)supported by the National Natural Science Foundation of ChinaProject(201351)supported by the Foundation for the Author of National Excellent Doctoral Dissertation of ChinaProject(NCET-13-0669)supported by Program for New Century Excellent Talents in University,China
文摘The capillary process coexists with gravity flow within leaching heap due to the dual-porosity structure. Capillary rise is responsible for the mineral dissolution in fine particle zones and interior coarse rock. The effect of particle size and heap porosity on the capillary process was investigated through a series of column tests. Macropore of the ore heap was identified, and its capillary rise theory analysis was put forward. Two groups of ore particles, mono-size and non-uniform, were selected for the capillary rise test. The result shows that particle size has an inverse effect on the capillary ultimate height, and smaller particles exhibit higher capillary rise. Meanwhile, the poorly graded group exhibits small rise height and velocity, while the capillary rise in the well-graded particles is much greater. The relationship between porosity and fitting parameters of capillary rise was obtained. Low porosity and high surface tension lead to higher capillary height of the fine gradation. Moisture content increases with the capillary rise level going up, the relationship between capillary height and moisture content was obtained.
基金Projects (50934002, 51074013, 51104100) supported by the National Natural Science Foundation of China
文摘The images of granular ore media were captured by X-ray CT scanner. Combined with digital image processing and finite element techniques, the three-dimensional geometrical model, which represents the realistic pore structure of the media, was constructed. With this model, three dimensional pore scale fluid flow among particles was simulated. Then the distributions of fluid flow velocity and pressure were analyzed and the hydraulic conductivity was calculated. The simulation results indicate the fluid flow behaviors are mainly dominated by the volume and topological structure of pore space. There exist obvious preferential flow and leaching blind zones simultaneously in the medium. The highest velocities generally occur in those narrow pores with high pressure drops. The hydraulic conductivity obtained by simulation is the same order of magnitude as the laboratory test result, which denotes the validity of the model. The pore-scale and macro-scale are combined and the established geometrical model can be used for the simulations of other phenomena during heap leaching process.
基金financially supported by the National Key Research and Development Program of China (No. 2016YFC0600704)the National Science Fund for Excellent Young Scholars of China (No. 51722401)the Key Program of National Natural Science Foundation of China (No. 51734001)
文摘Compared with the traditional pyrometallurgical process, copper bioleaching has distinctive advantages of high efficiency and lower cost, enabling efficiently extracts of valuable metal resources from copper sulfides. Moreover, during long-term industrial applications of bioleaching, many regulatory enhancements and technological methods are used to accelerate the interfacial reactions. With advances in microbial genetic and sequencing technologies, bacterial communities and their mechanisms in bioleaching systems have been revealed gradually. The bacterial proliferation and dissolution of sulfide ores by a bacterial community depends on the pH, temperature, oxygen, reaction product regulation, additives, and passivation substances, among other factors. The internal relationship among the influencing factors and the succession of microorganism diversity are discussed and reviewed in this paper. This paper is intended to provide a good reference for studies related to enhanced bioleaching.
基金Project supported by Research Contracts 26-8211-12 and 26-8211-16 between Texas Rare Earth Resources,Inc.and the University of Texas at El Paso
文摘Round Top Mountain in Hudspeth County, west Texas, USA is a surface-exposed rhyolite intrusion enriched in Y and heavy rare earth elements （HREEs）, as well as Nb, Ta, Be, Li, F, Sn, Rb, Th, and U. The massive tonnage, estimated at well over 1 billion tons, of the deposit makes it a target for recovery of valuable yttrium and HREEs （YHREEs）, and possibly other scarce ele-ments. Because of the extremely fine grain size of the mineralized rhyolite matrix, it has not been clear which minerals host the YHREEs and in what proportions. REE-bearing minerals reported in the deposit included bastn？site-Ce, Y-bearing fluorite, xeno-time-Y, zircon, aeschynite-Ce, a Ca-Th-Pb fluoride, and possibly ancylite-La and cerianite-Ce. Extended X-ray absorption fine struc-ture （EXAFS） indicated that virtually all of the yttrium, a proxy for the HREEs, resided in a coordination in the fluorite-type crystal structure, rather than those in the structures of bastn？site-Ce and xenotime-Y. The YREE grade of the Round Top deposit was just over 0.05%, with 72%of this consisting of YHREEs. This grade was in the range of the South China ionic clay deposits that supply essentially all of the world’s YHREEs. Because the host Y-bearing fluorite is soluble in dilute sulfuric acid at room temperature, a heap leaching of the deposit appeared feasible, aided by the fact that 90%-95%of the rock consists of unreactive and insoluble feld-spars and quartz. The absence of overburden, remarkable consistency of mineralization grade throughout the massive rhyolite, prox-imity （a few km） to a US interstate highway, major rail systems and gas and electricity, temperate climate, and stable political location in the world’s largest economy all enhanced the potential economic appeal of Round Top.
基金supported by Project of Chongqing Ecology and Environment Bureau(2021111)Project of Chongqing Science and Technology Bureau(cstc2022jxjl0005)。
文摘This study studied the characteristics and source apportionment of heavy metal pollution in the agricultural soil surrounding a gangue coal heap in Chongqing,China by using absolute principal component scores-multiple linear regression(APCSMLR)model and positive matrix factorization(PMF)model.The applicability of the models was compared in the assessment of source apportionment.The results showed that the average contents of Cd,Hg,As,Pb,Cr,Cu,Ni,and Zn in the surface soil were 0.46,0.14,9.66,31.2,127,95.6,76.0,and 158 mg/kg,respectively.Combined with the spatial distribution and correlation analyses,the results of source apportionment were consistent for both the APCSMLR and PMF models.Cd,Hg,As,and Pb were mainly affected by the gangue heap accumulation,with respective contributions of 74.6%,79.4%,69.1%,and 67.2%based on the APCS-MLR model and respective contributions of 69.7%,60.7%,57.4%,and 41.9%based on the PMF model.Ni and Zn were mainly affected by industrial and agricultural activities,while Cr and Cu were mainly affected by natural factors.The results of the source apportionment were approximately consistent between the APCS-MLR and PMF models.The combined application of the two receptor models can make the results of source apportionment more comprehensive,accurate,and reliable.
基金funded by the National Natural Science Foundation of China(41401541,51674231)Bureau of International Co-operation,Chinese Academy of Sciences(122111KYSB20150013)
文摘Heap bioleaching is one of the most clean and economical processes for recovery of low-grade and complex ores, because the sulfide minerals are natural habitats for acidophiles capable of iron-and sulfur-oxidation. The most exciting advances in heap bioleaching are occurring in the field of microbiology, especially with the development of advanced molecular biology approaches. These chemolithotrophic microorganisms living in the acid mine environment fix N_2 and CO_2 and obtain energy for growth from soluble ferrous iron and reduced inorganic sulfur compounds during oxidation of sulfide minerals. The ferric iron as oxidant and sulfuric acid are a result of microbial activity and provide favorable conditions for the dissolution of sulfide minerals. Various microbial consortia were applied successfully in commercial bioleaching heaps around the world, and microbial community and activity were adapted related to the local climatic conditions, ore characteristics and engineering configuration. This review focuses on diversity of bioleaching microbes, their role in heap bioleaching processes, their community structure and function in industrial heaps and the relation to the ore characteristics and the engineering configuration, to give implications for optimizing leaching efficiency of heap bioleaching.
基金Project(U1608254)supported by the Special Fund for the National Natural Science Foundation of ChinaProjects(ZJKY2017(B)KFJJ01,ZJKY2017(B)KFJJ02)supported by the Zijin Mining Group Co.,Ltd,China。
文摘To design heap biooxidation process,it is necessary to understand its internal rules.The heap biooxidation of gold ore from Anhui province was researched in this study.The results showed that the main microorganisms in the heap were A.ferrooxidans,F.acidiphilum and L.ferrodiazotrophum.Under their combined action,gold leaching extent rose from 35.62%to 78.08%in 80 d.Boltzmann model matches the actual oxidation effect better and the model equations were obtained.The model predicted that the oxidation extents of arsenic and sulfur are 58.577%and 42.122%after one year,and the gold leaching extent was 80.40%.The arsenic and sulfur oxidation extents,and gold leaching extent were all linearly correlated.It is more reliable to predict gold leaching extent by sulfur oxidation extent.These results provided good guidance for practical application in the actual production.
基金supported by the National High Technology Research and Development Program (Nos. 2012AA061501, 2012AA061502)the National Natural Science Foundation of China (No. 50934002)
文摘Bioleaching of chalcopyrite often encountered the formation of passivation layer, which inhibited the leaching process and resulted in a low leaching rate. This inhibitory effect can be eliminated by thermophilic biole- aching. The industrial test of BioCOP technology based on thermophiles was successfully completed, which confirmed the feasibility of chalcopyrite bioleaching. However, industrial leaching rate of chalcopyrite heap bioleaching is lower. This paper described the development status and industrial test of chalcopyrite heap bioleaching technology. The reasons for the lower efficiency of chalcopyrite heap bioleaching were analyzed. The strategies for successful chalcopyrite heap bioleaching were proposed.
基金Projects(50934002,51104011) supported by the National Natural Science Foundation of ChinaProject(IRT0950) supported by Program for Changjiang Scholars and Innovative Research Team in Chinese UniversityProject(20100480200) supported by China Postdoctoral Science Foundation
文摘Based on the momentum and mass conservation equations, a comprehensive model of heap bioleaching process is developed to investigate the interaction between chemical reactions, solution flow, gas flow, and solute transport within the leaching system. The governing equations are solved numerically using the COMSOL Multiphysics software for the coupled reactive flow and solute transport at micro-scale, meso-scale and macro-scale levels. At or near the surface of ore particle, the acid concentration is relatively higher than that in the central area, while the concentration gradient decreases after 72 d of leaching. The flow simulation between ore particles by combining X-ray CT technology shows that the highest velocity in narrow pore reaches 0.375 m/s. The air velocity within the dump shows that the velocity near the top and side surface is relatively high, which leads to the high oxygen concentration in that area. The coupled heat transfer and liquid flow process shows that the solution can act as an effective remover from the heap, dropping the highest temperature from 60 to 38 ℃. The reagent transfer coupled with solution flow is also analyzed. The results obtained allow us to obtain a better understanding of the fundamental physical phenomenon of the bioleaching process.
基金Projects(51304238,51534008)supported by the National Natural Science Foundation of ChinaProject(2015CX005)supported by Innovation Driven Plan of Central South University,China
文摘To explore a new evaluation method for spontaneous combustion tendency of different areas in sulfide ore heap, ore samples from a pyrite mine in China were taken as experimental materials, and the temperature variations of the measuring points of simulated ore heap were measured. Combined with wavelet transform and nonlinear parameters extraction, a new method for spontaneous combustion tendency of different areas in sulfide ore heap based on nonlinear parameters was proposed and its reliability was verified by field test. The results indicate that temperature field evolution of the simulated ore heap presents significant spatial difference during self-heating process. Area with the maximum increasing extent of temperature in sulfide ore heap changes notably with the proceeding of self-heating reaction. Self-heating of sulfide ore heap is a chaotic evolution process, which means that it is feasible to evaluate spontaneous combustion tendency of different areas by nonlinear analysis method. There is a relatively strong correlation between the maximum Lyapunov exponent and spontaneous combustion tendency with the correlation coefficient of 0.9792. Furthermore, the sort of the maximum Lyapunov exponent is consistent with that of spontaneous combustion tendency. Therefore, spontaneous combustion tendency of different areas in sulfide ore heap can be evaluated by means of the maximum Lyapunov exponent method.
