The purpose of this study was to determine health-promoting behaviours of university nursing students in Jordan. This descriptive cross-sectional study used convenient sampling technique to recruit 167 undergraduate n...The purpose of this study was to determine health-promoting behaviours of university nursing students in Jordan. This descriptive cross-sectional study used convenient sampling technique to recruit 167 undergraduate nursing students in Jordan. Data were collected by using an Arabic version of Health-Promoting Lifestyle Profile II. The study results revealed that the mean item score for total Health-Promoting Lifestyle Profile II was (127.24 ± 21.03). The students obtained highest scores in spiritual growth (25.04 ± 4.70) and lowest in physical activity subscales (16.27 ± 5.21). Significant difference was found between Health-Promoting Lifestyle Profile II subscales (stress management, health responsibility, and interpersonal relations) and students’ age and gender.展开更多
Objectives:This study aimed to determine the predictors of health-promoting behaviour among older adults with hypertension in Bengkulu City,Bengkulu,Indonesia.Methods:A cross-sectional study was conducted in 333 older...Objectives:This study aimed to determine the predictors of health-promoting behaviour among older adults with hypertension in Bengkulu City,Bengkulu,Indonesia.Methods:A cross-sectional study was conducted in 333 older adults with hypertension,who were selected using multistage sampling method.Data were obtained by face-to-face interview with structured questionnaires.The questionnaires used in this study included the Health-Promoting Lifestyle Profile II(HPLP II),Hypertension Knowledge-Level Scale(HK-LS),Self-Rated Abilities for Health Practices Scale(SRAHP),Barriers to Health-promoting Behaviour Scales(BAS),Benefits to Health-Promoting Behaviour Scales(BES),Multidimensional Scale of Perceived Social Support(MSPSS)and Situational Influences Questionnaire(SIQ).Data were analysed by using multiple linear regressions.Results:The mean and standard deviation(Mean±SD)of each questionnaire were as follows:HPLP II,2.55±0.19;HK-LS,11.83±3.00;SRAHP,2.00±5.87;BAS,27.89±2.70;BES,34.29±2.29;MSPSS,60.35±8.12;and SIQ,47.71±6.66.According to the multiple linear regression model,36.9% of the variation in health-promoting behaviour among older adults with hypertension can be explained by six variables,namely,education,knowledge,self-efficacy,perceived barriers,social support and situational influences(adjusted R^(2)=0.369).Conclusions:High and good-quality education will increase the level of health-promoting behaviour,whereas barriers,such as expense and time requirement,can decrease it.Situational influences and support from family and friends can also influence the older adult's attempts to change their health behaviour.Increased self-efficacy will clearly result in improved health-promoting behaviour of older adults with hypertension.展开更多
Polygonati Rhizoma,a functional food and a traditional Chinese medicine broadly used in China and several Southeast Asia countries,possesses effective health-promoting activities.Prepared from 3 plants in Polygonatum ...Polygonati Rhizoma,a functional food and a traditional Chinese medicine broadly used in China and several Southeast Asia countries,possesses effective health-promoting activities.Prepared from 3 plants in Polygonatum genus(Polygonatum kingianum,Polygonatum sibiricum,and Polygonatum cyrtonema),Polygonati Rhizoma has drawn increasing attention due to its remarkable immune-enhancing and metabolic regulatory activities in recent years.In this review,we summarized the updated research of chemical constituents and biological activities of Polygonati Rhizoma,especially the metabolic regulation,immunomodulatory effects,and anti-fatigue activities,aiming to provide a comprehensive understanding,broaden the usage and promote more in-depth exploration of Polygonati Rhizoma as a functional food.展开更多
Laser debonding technology has been widely used in advanced chip packaging,such as fan-out integration,2.5D/3D ICs,and MEMS devices.Typically,laser debonding of bonded pairs(R/R separation)is typically achieved by com...Laser debonding technology has been widely used in advanced chip packaging,such as fan-out integration,2.5D/3D ICs,and MEMS devices.Typically,laser debonding of bonded pairs(R/R separation)is typically achieved by completely removing the material from the ablation region within the release material layer at high energy densities.However,this R/R separation method often results in a significant amount of release material and carbonized debris remaining on the surface of the device wafer,severely reducing product yields and cleaning efficiency for ultra-thin device wafers.Here,we proposed an interfacial separation strategy based on laser-induced hot stamping effect and thermoelastic stress wave,which enables stress-free separation of wafer bonding pairs at the interface of the release layer and the adhesive layer(R/A separation).By comprehensively analyzing the micro-morphology and material composition of the release material,we elucidated the laser debonding behavior of bonded pairs under different separation modes.Additionally,we calculated the ablation threshold of the release material in the case of wafer bonding and established the processing window for different separation methods.This work offers a fresh perspective on the development and application of laser debonding technology.The proposed R/A interface separation method is versatile,controllable,and highly reliable,and does not leave release materials and carbonized debris on device wafers,demonstrating strong industrial adaptability,which greatly facilitates the application and development of advanced packaging for ultra-thin chips.展开更多
Natural surfaces with super hydrophobic properties often have micro or hierarchical structures.In this paper, the wettingbehaviours of a single droplet on biomimetic micro structured surfaces with different roughness ...Natural surfaces with super hydrophobic properties often have micro or hierarchical structures.In this paper, the wettingbehaviours of a single droplet on biomimetic micro structured surfaces with different roughness parameters are investigated.Atheoretical model is proposed to study wetting transitions.The results of theoretical analysis are compared with those of experimentindicating that the proposed model can effectively predict the wetting transition.Furthermore, a numerical simulationbased on the meso scale Lattice Boltzmann Method （LBM） is performed to study dynamic contact angles, contact lines, andlocal velocity fields for the case that a droplet displays on the micro structured surface.A spherical water droplet with r= 15 μmfalls down to a biomimetic square-post patterned surface under the force of gravity with an initial velocity of 0.01 m·sand aninitial vertical distance of 20 μm from droplet centre to the top of pots.In spite of a higher initial velocity, the droplet can stillstay in a Cassie state; moreover, it reaches an equilibrium state at t≈17.5 ms, when contact angle is 153.16° which is slightlylower than the prediction of Cassie-Baxter’s equation which gives θ=154.40°.展开更多
This paper studies the critical behaviours and magnetic properties of three-dimensional bond and anisotropy dilution Blume-Capel model （BCM） in the presence of an applied field within the effective field theory. The...This paper studies the critical behaviours and magnetic properties of three-dimensional bond and anisotropy dilution Blume-Capel model （BCM） in the presence of an applied field within the effective field theory. The trajectory of tricritical point, reentrant transitions and degenerate patterns of anisotropy are obtained both for the bond and the anisotropy dilutions. The global phase diagrams demonstrate unusually reentrant phenomena. The temperature dependences of magnetization curves undergo remarkable spin glass behaviour at low temperatures, and transform from ferromagnetism to paramagnetism at high temperature in applied fields. Temperature dependence of magnetic susceptibility curve is in qualitative agreement with experimental result.展开更多
The high-cycle fatigue and fracture behaviours of the selective laser melting(SLM)AlSi10Mg alloy were investigated.Flat specimens were designed directly in the shape required for the fatigue tests under pulsating load...The high-cycle fatigue and fracture behaviours of the selective laser melting(SLM)AlSi10Mg alloy were investigated.Flat specimens were designed directly in the shape required for the fatigue tests under pulsating loading in tension(R=0,R is the dynamic factor).The fatigue−life(S−N)curves were modelled with a conditional Weibull’s probability density function,where the real-valued genetic algorithm(GA)and the differential ant-stigmergy algorithm(DASA)were applied to estimating the needed Weibull’s parameters.The fractography of the fatigue specimens showed that the fatigue cracks initiated around the surface defects produced by SLM and then propagated in an unstable manner.However,the presence of large SLM defects mainly influenced the crack initiation period and did not have a strong influence on the crack propagation.The obtained experimental results present a basis for further investigation of the fatigue behaviour of advanced materials and structures(e.g.cellular metamaterials)fabricated by additive manufacturing(AM).Especially,in the case of two-dimensional cellular structures,the cross-section of cellular struts is usually rectangular which corresponds to the specimen shape considered in this work.展开更多
We propose a kinetic aggregation model where species A aggregates evolve by the catalysis-coagulation and the catalysis-fragmentation, while the catalyst aggregates of the same species B or C perform self-coagulation ...We propose a kinetic aggregation model where species A aggregates evolve by the catalysis-coagulation and the catalysis-fragmentation, while the catalyst aggregates of the same species B or C perform self-coagulation processes. By means of the generalized Smoluchowski rate equation based on the mean-field assumption, we study the kinetic behaviours of the system with the catalysis-coagulation rate kernel K（i,j;l） l^v and the catalysis-fragmentation rate kernel F（i,j; l） l^μ, where l is the size of the catalyst aggregate, and v and μ are two parameters reflecting the dependence of the catalysis reaction on the size of the catalyst aggregate. The relation between the values of parameters v and μ reflects the competing roles between the two catalysis processes in the kinetic evolution of species A. It is found that the competing roles of the catalysis-coagulation and catalysis-fragmentation in the kinetic aggregation behaviours are not determined simply by the relation between the two parameters v and μ, but also depend on the values of these two parameters. When v 〉 μ and v ≥0, the kinetic evolution of species A is dominated by the catalysis-coagulation and its aggregate size distribution αk（t） obeys the conventional or generalized scaling law; when v 〈 μ and v ≥ 0 or v 〈 0 but μ≥ 0, the catalysis-fragmentation process may play a dominating role and ak（t） approaches the scale-free form; and in other cases, a balance is established between the two competing processes at large times and ακ（t） obeys a modified scaling law.展开更多
The Mg2Ni-type alloys with nominal compositions of Mg20Ni10-xCox(x=0,1,2,3,4,%,mass fraction) were prepared by melt-spinning technology.The structures of the alloys were studied by XRD,SEM and HRTEM.The hydrogen absor...The Mg2Ni-type alloys with nominal compositions of Mg20Ni10-xCox(x=0,1,2,3,4,%,mass fraction) were prepared by melt-spinning technology.The structures of the alloys were studied by XRD,SEM and HRTEM.The hydrogen absorption/desorption kinetics and the electrochemical performances of the alloys were measured.The results show that no amorphous phase forms in the as-spun Co-free alloy,but the as-spun alloys containing Co show a certain amount of amorphous phase.The hydrogen absorption capacities of the as-cast alloys first increase and then decrease with the incremental change of Co content.The hydrogen desorption capacities of as-cast and spun alloys rise with increasing Co content.The melt spinning significantly improves the hydrogenation and dehydrogenation capacities and kinetics of the alloys.The substitution of Co for Ni clearly enhances the discharge capacities of the alloys and the cycle stability of the as-spun alloys.展开更多
The phase behaviours of diblock copolymers under cylindrical confinement are studied in two-dimensional space by using the self-consistent field theory. Several phase parameters are adjusted to investigate the cylindr...The phase behaviours of diblock copolymers under cylindrical confinement are studied in two-dimensional space by using the self-consistent field theory. Several phase parameters are adjusted to investigate the cylindrical-confinement-induced phase behaviours of diblock copolymers. A series of lamella-cylinder mixture phases, such as the mixture of broken-lamellae and cylinders and the mixture of square-lamellae and cylinders, are observed by varying the phase parameters, in which the behaviours of these mixture phases are discussed in the corresponding phase diagrams. Furthermore, the free energies of these mixture phases are investigated to illustrate their evolution processes. Our results are compared with the available observations from the experiments and simulations respectively, and they are in good agreement and provide an insight into the phase behaviours under cylindrical confinement.展开更多
Mobile information and communication technologies(MICTs) have fully penetrated everyday life in smart societies;this has greatly compressed time, space, and distance, and consequently, reshaped residents’ travel beha...Mobile information and communication technologies(MICTs) have fully penetrated everyday life in smart societies;this has greatly compressed time, space, and distance, and consequently, reshaped residents’ travel behaviour patterns. As a new mode of shared mobility, the sharing bicycle offers a variety of options for the daily travel of urban residents. Extant studies have mainly examined the travel characteristics and influencing factors of public bicycles with piles, while the travel patterns for sharing bicycles and their driving mechanisms have been largely ignored. Using one week’s travel data for Mobike, this study investigated the spatial and temporal distribution patterns of sharing bicycle travel behaviours in the central urban area of Guangzhou, China;furthermore, it identified the influences of built environment density factors on sharing bicycle travel behaviours based on the geographically weighted regression method. Obvious morning and evening peaks were observed in the sharing bicycle travel patterns for both weekdays and weekends. The old urban area, which had a high degree of mixed function, dense road networks, and cycling-friendly built environments, was the main travel area that attracted sharing bicycles on both weekdays and weekends. Furthermore, factors including the point of interest(POI) for the density of public transport stations, the functional mixing degree, and the density of residential POIs significantly affected residents’ travel behaviours. These findings could enrich discourse regarding shared mobility with a Chinese case characterised by rapidly developing MICTs and also provide references to local authorities for improving slow traffic environments.展开更多
Background Cyberbullying is presently an alarming problem worldwide due to its impact on the emotions,behaviour and psychological well-being of not only the victims,but the bullies themselves and also bystanders.Aim T...Background Cyberbullying is presently an alarming problem worldwide due to its impact on the emotions,behaviour and psychological well-being of not only the victims,but the bullies themselves and also bystanders.Aim This study aims to investigate bystanders'behaviours in cyberbullying and associated factors.Methods This research is a cross-sectional study of 578 secondary school students in Bangkok,Thailand.Simple random sampling was used to select four secondary schools.Data were collected through online questionnaires which included four sections:(1)demographic data,(2)bystanders'behaviour in cyberbullying(cyberbullying experience and attitude towards cyberbullying were included in this section),(3)parental attachment(nventory of Parent Attachment-Revised),and(4)self-esteem(Rosenberg Self-Esteem Scale-Revised).Results It was found that most occurrences of bystanders'behaviour were:(a)willing to intervene or help victims(34.6%),(b)ignoring the cyberbullying(28%)or(c)partaking in cberbulling(263%).Participants who either were victims of cyberbullying or knew of cyberbullying happening to friends or relatives and had high parental attachment would intervene more than those Who never had such experiences.Participants Who knew of cyberbullying happening to the general public had tendencies towards ignoring the cyberbulying.Participants who indicated they were bullies and had positive atitude towards joining in tended to partake in the cyberbullying more than those who were not.Conclusion Factors relating to the behaviours of bystanders in cyberbullying should be further explored to provide support in the discouragement of ignoring and averting participation in cyberbullying.Secure parental attachment is one important factor that should be instilled during childhood years.展开更多
To the Editor,Non-human primate(NHP)models are advantageous for mimicking human addiction with high behavioural validity.1 However,current NHP drug addiction models(eg,self-administration)often require a comprehensive...To the Editor,Non-human primate(NHP)models are advantageous for mimicking human addiction with high behavioural validity.1 However,current NHP drug addiction models(eg,self-administration)often require a comprehensive behavioural training paradigm,relatively expensive apparatus and invasive surgical procedures.展开更多
Purpose:To investigate the knowledge and behaviours on foot self-care in patients with type 2 diabetes mellitus;analyse the influential factors,and provide information for the intervention study.Methods:A total of 596...Purpose:To investigate the knowledge and behaviours on foot self-care in patients with type 2 diabetes mellitus;analyse the influential factors,and provide information for the intervention study.Methods:A total of 5961 patients with type 2 diabetes mellitus from 144 hospitals in China were included in the study.The investigation content included patients'demographic data,foot self-care knowledge and behaviours.The investigation tools were the questionnaires on the general diabetes information,on the foot self-care knowledge,and on the foot selfcare behaviours.Results:The foot self-care knowledge was medium and the foot self-care behaviour was poor.The status of knowledge and behaviours were influenced by education,duration of diabetes mellitus,periodic inspection,and education about diabetic complications.Pearson analysis demonstrated that there was positive correlation between knowledge score and behaviour score(r?0.27,p<0.001).Conclusions:The status of foot self-care knowledge and behaviours are not optimistic.According to the patients'own characteristics,the theory of knowledge,attitude and practice applies to encouraging patients to go for periodic inspection and education about diabetic complications so as to enhance the knowledge and promote the self-care behaviours.展开更多
The asperity wear of rock joints significantly affects their shear behaviour.This study discusses the wear damage of the asperities on the joint surface,highlighting the roughness degradation characteristics during th...The asperity wear of rock joints significantly affects their shear behaviour.This study discusses the wear damage of the asperities on the joint surface,highlighting the roughness degradation characteristics during the shear process.The direct shear experiment of artificial specimens containing rock joints was conducted under different normal stresses based on three-dimensional scanning technology.These experimental results showed the contribution of joint wear to roughness degeneration,such as the height,zone,and volume of asperity degeneration.The wear coefficient of the rock joint was obtained based on the volume wear of asperities in the laboratory experiment.The functional relationship between the friction coefficient and wear coefficient is subsequently determined.To quantitatively analyse the wear damage of a joint surface,a calculation method for determining the wear depth of the rock joint after shearing was proposed based on wear theory.The relationship between the ultimate dilation and wear depth was analysed.A coefficient m,which can describe the damage degree of the joint surface,and a prediction method of joint surface roughness after shearing are established.Good agreement between analytical predictions and measured values demonstrates the capability of the developed model.Lastly,the sensitivity factors on the wear depth are explored.展开更多
Railway accidents,particularly serious derailments,can lead to catastrophic consequences.Therefore,it is essential to prevent derailment escalation to reduce the likelihood of severe derailments.Train post-derailment ...Railway accidents,particularly serious derailments,can lead to catastrophic consequences.Therefore,it is essential to prevent derailment escalation to reduce the likelihood of severe derailments.Train post-derailment behaviours and containment methods play a critical role in preventing derailment escalation and providing passive safety protection and accident prevention in the event of a derailment.However,despite the increasing attention on this field from academia and industry in recent years,there is a lack of systematic exploration and summarization of emerging applications and containment methods in train post-derailment research.For this reason,this paper presents a comprehensive review of existing studies on train post-derailment behaviours,encompassing various topics such as post-derailment contact-impact models,dynamic modelling and simulation techniques,and the primary factors influencing post-derailment behaviours.Significantly,this review introduces and elucidates substitute guidance mechanisms(SGMs),which serve as railway-specific passive safety protection and accident prevention measures.The various types of SGMs are depicted,and their ongoing developments and applications are explored in depth.The review additionally points out several unresolved challenges including the adverse effects of SGMs,and proposes future research directions to advance the theoretical understanding and practical application of train post-derailment behaviours and containment methods.This review seeks to be a valuable reference for railway industry professionals in preventing catastrophic derailment consequences through post-derailment containment methods.展开更多
Recent decades have witnessed an increasing number of studies investigating petroleum systems with the application of rhenium-osmium(Re-Os) isotopic geochemistry. Here, we review the use of the 187 Re-187 Os geochrono...Recent decades have witnessed an increasing number of studies investigating petroleum systems with the application of rhenium-osmium(Re-Os) isotopic geochemistry. Here, we review the use of the 187 Re-187 Os geochronometer with respect to the geochemical behaviour of rhenium and osmium in hydrocarbon-related geological processes. The Re-Os budget in hydrocarbon source rock predominantly originates from natural water columns during its deposition. Open seawater tends to have a homogeneous Os isotopic composition because its residence time in seawater is longer than the time taken for ocean mixing. On the contrary, restricted water bodies(e.g., lakes) may have heterogeneous Os isotopic compositions due to the greater amount of terrigenous input. Hydrogenous Re and Os atoms are sequestered from the water body into sedimentary organic matter and transferred into crude oil through thermal maturation of organic matter. Thermal maturation likely does not significantly alter the Re-Os isotopic systematics of the source rock as a Re-Os isochron age of 442±21 Ma(2σ) is yielded in this study for over matured source rocks within the Silurian Longmaxi Formation from the Sichuan Basin. Re-Os atoms are mainly hosted by the highly polar/aggregating/aromatic asphaltenes in hydrocarbons, possibly chelating with organic complexes or occurring as metalloporphyrins. Resin and aromatic hydrocarbons also contribute to the Re-Os budget, but are 2 to 3 orders of magnitude lower than that of asphaltenes, whereas saturates do not contain appreciable Re-Os contents. The distribution of Re-Os atoms in hydrocarbons is heterogeneous because the duplicate analysis of pure single bitumen samples yields similar ^(187)Os/^(188)Os ratios whereas variable ^(187)Re/^(188)Os ratios. The Re-Os system in crude oils can be reset during transport away from the source rocks, with Os-rich organic fractions more readily expelled than Re-rich fractions. Contact with metal-rich fluids(e.g., hydrothermal fluid) or compositional changes related to asphaltene contents(e.g., deasphalting, biodegradation, thermal cracking and thermochemical sulphate reduction) are also likely to alter the Re-Os systematics in hydrocarbons. These geochemical features enable the ^(187)Re-^(187)Os isotopic system to have robust applicability for petroleum system investigations, which may use the Re-Os radiometric tool for:(1) stratigraphic correlation of source rocks,(2) dating geological events altering the asphaltene content in hydrocarbon such as hydrocarbon generation, thermochemical sulphate reduction, etc., and,(3) fingerprinting hydrocarbons. Regardless of the robustness of the ^(187)Re-^(187)Os geochronometer for petroleum system investigations, there are several pending questions such as partitioning between solid organic species or between organic matter and sulphide, chelating sites in hydrocarbons and Os isotopic equilibration between hydrocarbon subfractions. To improve the understanding of the Re-Os behaviour in petroleum systems, we underscore multi-proxies-based geochemistry(e.g., inorganic-organic geochemistry) and experimental studies(e.g., hydrous pyrolysis).展开更多
Introduction: Sickle cell anaemia is a hereditary disease that combines physical and psychological manifestations, including suicidal tendencies. So far, to our knowledge, no study has been conducted on suicidal behav...Introduction: Sickle cell anaemia is a hereditary disease that combines physical and psychological manifestations, including suicidal tendencies. So far, to our knowledge, no study has been conducted on suicidal behaviours among people with sickle cell disease in Cameroon. This is what justifies our study on the prevalence and factors related to suicidal behaviors in our study population. Methods: We conducted a cross-sectional, analytical study of 171 sickle cell patients aged from 12 years upwards who came to the sickle cell disease care service of the Laquintinie Hospital in Douala, over a period of 6 months, that is, from 1 January to 31 June 2022. Data were collected using a structured questionnaire with questions on suicidal behaviours based on the “MINI” (Mini International Neuropsychiatric Interview). The data were processed using the SPSS 26.0 software. The related factors were studied in both a bivariate and multivariate analysis. Results: Female sickle cell patients accounted for 60.2% of the sample. The mean age was 23.36 ± 8.42 years. Suicidal ideation was prevalent in 56% of cases and 13% attempted suicide. The factors most associated with suicidal ideation were: primary level of education (OR = 0.08 (0.09 - 0.79);p = 0.03), feeling unworthy of life (OR = 0.40 (0.08 - 1.96);p = 0.02), not often being considered by those around them (OR = 2.97 (1.26 - 6.99);p = 0.01), lack of family support (OR = 0.34 (0.15 - 0.77);p = 0.01). Meanwhile, the factors associated with suicide attempts were: the fact of being rarely exposed to suicide-related media (OR = 4.17 (1.40 - 71.80);p = 0.03), and a constant feeling of sadness when returning home (OR = 18.02 (1.59 - 20.55);p = 0.01). Conclusion: More than half of sickle cell patients had had suicidal thoughts and 1/6 had made at least one suicide attempt, women and young adults being the most concerned. It is therefore necessary to ensure optimum psychological care for patients with sickle cell disease.展开更多
The combination of the dipping effect and hydromechanical(H-M)coupling effect can easily lead to water inrush disasters in water-rich roadways with different dip angles in coal mines.Therefore,H-M coupling tests of be...The combination of the dipping effect and hydromechanical(H-M)coupling effect can easily lead to water inrush disasters in water-rich roadways with different dip angles in coal mines.Therefore,H-M coupling tests of bedded sandstones under identical osmotic pressure and various confining pressures were conducted.Then,the evolution curves of stress-strain,permeability and damage,macro-and mesoscopic failure characteristics were obtained.Subsequently,the mechanical behaviour was characterized,and finally the failure mechanism was revealed.The results showed that:(1)The failure of the sandstone with the bedding angle of 45°or 60°was the structure-dominant type,while that with the bedding angle of 0°,30°or 90°was the force-dominant type.(2)When the bedding angle was in the range of(0°,30°)or(45°,90°),the confining pressure played a dominant role in influencing the peak strength.However,withinβ∈(30°,45°),the bedding effect played a dominant role in the peak strength.(3)With the increase in bedding angle,the cohesion increased first,then decreased and finally increased,while the internal friction angle was the opposite.(4)When the bedding angle was 0°or 30°,the“water wedging”effect and the“bedding buckling”effect would lead to the forking or converging shear failure.When the bedding angle was 45°or 60°,the sliding friction effect would lead to the shear slipping failure.When the bedding angle was 90°,the combination of the“bedding buckling”effect and shear effect would lead to the mixed tension-shear failure.The above conclusions obtained are helpful for the prevention of water inrush disasters in water-rich roadways with different dips in coal mines.展开更多
Two floating structures in close proximity are very commonly seen in offshore engineering. They are often subjected to steep waves and, therefore, the transient effects on their hydrodynamic features are of great conc...Two floating structures in close proximity are very commonly seen in offshore engineering. They are often subjected to steep waves and, therefore, the transient effects on their hydrodynamic features are of great concem. This paper uses the quasi arbitrary Lagrangian Eulerian finite element method （QALE-FEM）, based on the fully nonlinear potential theory （FNPT）, to numerically investigate the interaction between two 3-D floating structures, which undergo motions with 6 degrees of freedom （DOFs）, and are subjected to waves with different incident angles. The transient behaviours of floating structures, the effect of the accompanied structures, and the nonlinearity on the motion of and the wave loads on the structures are the main focuses of the study. The investigation reveals an important transient effects causing considerably larger structure motion than that in steady state. The results also indicate that the accompanied structure in close proximity enhances the interaction between different motion modes and results in stronger nonlinearity causing 2hal-order component to be of similar significance to the fundamental one.展开更多
文摘The purpose of this study was to determine health-promoting behaviours of university nursing students in Jordan. This descriptive cross-sectional study used convenient sampling technique to recruit 167 undergraduate nursing students in Jordan. Data were collected by using an Arabic version of Health-Promoting Lifestyle Profile II. The study results revealed that the mean item score for total Health-Promoting Lifestyle Profile II was (127.24 ± 21.03). The students obtained highest scores in spiritual growth (25.04 ± 4.70) and lowest in physical activity subscales (16.27 ± 5.21). Significant difference was found between Health-Promoting Lifestyle Profile II subscales (stress management, health responsibility, and interpersonal relations) and students’ age and gender.
基金The authors would like to express gratitude to the elders in Bengkulu City,Indonesia for their participation in this study,the Boromarajonani College of Nursing Nopparat Vajira(an affiliated institution of Kasetsart University and the Institute of Health Science Tri Mandiri Sakti for their support,as well as the Directorate General of Higher Education and the Ministry of Research,Technology and Higher Education of The Republic of Indonesia for the funding.
文摘Objectives:This study aimed to determine the predictors of health-promoting behaviour among older adults with hypertension in Bengkulu City,Bengkulu,Indonesia.Methods:A cross-sectional study was conducted in 333 older adults with hypertension,who were selected using multistage sampling method.Data were obtained by face-to-face interview with structured questionnaires.The questionnaires used in this study included the Health-Promoting Lifestyle Profile II(HPLP II),Hypertension Knowledge-Level Scale(HK-LS),Self-Rated Abilities for Health Practices Scale(SRAHP),Barriers to Health-promoting Behaviour Scales(BAS),Benefits to Health-Promoting Behaviour Scales(BES),Multidimensional Scale of Perceived Social Support(MSPSS)and Situational Influences Questionnaire(SIQ).Data were analysed by using multiple linear regressions.Results:The mean and standard deviation(Mean±SD)of each questionnaire were as follows:HPLP II,2.55±0.19;HK-LS,11.83±3.00;SRAHP,2.00±5.87;BAS,27.89±2.70;BES,34.29±2.29;MSPSS,60.35±8.12;and SIQ,47.71±6.66.According to the multiple linear regression model,36.9% of the variation in health-promoting behaviour among older adults with hypertension can be explained by six variables,namely,education,knowledge,self-efficacy,perceived barriers,social support and situational influences(adjusted R^(2)=0.369).Conclusions:High and good-quality education will increase the level of health-promoting behaviour,whereas barriers,such as expense and time requirement,can decrease it.Situational influences and support from family and friends can also influence the older adult's attempts to change their health behaviour.Increased self-efficacy will clearly result in improved health-promoting behaviour of older adults with hypertension.
基金funded by Scientific and Technological Research Project and Technology Innovation Platform Project of Huibei Provincial Department of Science and Technology(2025AFD345 and 2024CSA071)grant from Huanggang Science and Technology Bureau(ZDZX20240008)。
文摘Polygonati Rhizoma,a functional food and a traditional Chinese medicine broadly used in China and several Southeast Asia countries,possesses effective health-promoting activities.Prepared from 3 plants in Polygonatum genus(Polygonatum kingianum,Polygonatum sibiricum,and Polygonatum cyrtonema),Polygonati Rhizoma has drawn increasing attention due to its remarkable immune-enhancing and metabolic regulatory activities in recent years.In this review,we summarized the updated research of chemical constituents and biological activities of Polygonati Rhizoma,especially the metabolic regulation,immunomodulatory effects,and anti-fatigue activities,aiming to provide a comprehensive understanding,broaden the usage and promote more in-depth exploration of Polygonati Rhizoma as a functional food.
基金the National Natural Science Foundation of China(62174170)the Natural Science Foundation of Guangdong Province(2024A1515010123)+4 种基金the Shenzhen Science and Technology Program(20220807020526001)the Strategic Priority Research Program of the Chinese Academy of Sciences(XDB0670000)the Shenzhen Science and Technology Program(KJZD20230923114708018,KJZD20230923114710022)the Talent Support Project of Guangdong(2021TX06C101)the Shenzhen Basic Research(JCYJ20210324115406019).
文摘Laser debonding technology has been widely used in advanced chip packaging,such as fan-out integration,2.5D/3D ICs,and MEMS devices.Typically,laser debonding of bonded pairs(R/R separation)is typically achieved by completely removing the material from the ablation region within the release material layer at high energy densities.However,this R/R separation method often results in a significant amount of release material and carbonized debris remaining on the surface of the device wafer,severely reducing product yields and cleaning efficiency for ultra-thin device wafers.Here,we proposed an interfacial separation strategy based on laser-induced hot stamping effect and thermoelastic stress wave,which enables stress-free separation of wafer bonding pairs at the interface of the release layer and the adhesive layer(R/A separation).By comprehensively analyzing the micro-morphology and material composition of the release material,we elucidated the laser debonding behavior of bonded pairs under different separation modes.Additionally,we calculated the ablation threshold of the release material in the case of wafer bonding and established the processing window for different separation methods.This work offers a fresh perspective on the development and application of laser debonding technology.The proposed R/A interface separation method is versatile,controllable,and highly reliable,and does not leave release materials and carbonized debris on device wafers,demonstrating strong industrial adaptability,which greatly facilitates the application and development of advanced packaging for ultra-thin chips.
基金supported by the Royal Society(UK)-NSFC(China)joint project,2009-2011by China Natural Science Foundation major International collaborative project 2010-2013 under grant No.50920105504
文摘Natural surfaces with super hydrophobic properties often have micro or hierarchical structures.In this paper, the wettingbehaviours of a single droplet on biomimetic micro structured surfaces with different roughness parameters are investigated.Atheoretical model is proposed to study wetting transitions.The results of theoretical analysis are compared with those of experimentindicating that the proposed model can effectively predict the wetting transition.Furthermore, a numerical simulationbased on the meso scale Lattice Boltzmann Method （LBM） is performed to study dynamic contact angles, contact lines, andlocal velocity fields for the case that a droplet displays on the micro structured surface.A spherical water droplet with r= 15 μmfalls down to a biomimetic square-post patterned surface under the force of gravity with an initial velocity of 0.01 m·sand aninitial vertical distance of 20 μm from droplet centre to the top of pots.In spite of a higher initial velocity, the droplet can stillstay in a Cassie state; moreover, it reaches an equilibrium state at t≈17.5 ms, when contact angle is 153.16° which is slightlylower than the prediction of Cassie-Baxter’s equation which gives θ=154.40°.
基金Project supported by the Education Bureau Key Natural Science Foundation of Jiangsu Province （Grant No 03KJA140117） and by the 0pen Foundation of Jiangsu Key Laboratory of Thin Film （Grant No K2022）.
文摘This paper studies the critical behaviours and magnetic properties of three-dimensional bond and anisotropy dilution Blume-Capel model （BCM） in the presence of an applied field within the effective field theory. The trajectory of tricritical point, reentrant transitions and degenerate patterns of anisotropy are obtained both for the bond and the anisotropy dilutions. The global phase diagrams demonstrate unusually reentrant phenomena. The temperature dependences of magnetization curves undergo remarkable spin glass behaviour at low temperatures, and transform from ferromagnetism to paramagnetism at high temperature in applied fields. Temperature dependence of magnetic susceptibility curve is in qualitative agreement with experimental result.
基金the research core funding(No.P2-0063)the basic research project(No.J2-8186)from the Slovenian Research Agency.
文摘The high-cycle fatigue and fracture behaviours of the selective laser melting(SLM)AlSi10Mg alloy were investigated.Flat specimens were designed directly in the shape required for the fatigue tests under pulsating loading in tension(R=0,R is the dynamic factor).The fatigue−life(S−N)curves were modelled with a conditional Weibull’s probability density function,where the real-valued genetic algorithm(GA)and the differential ant-stigmergy algorithm(DASA)were applied to estimating the needed Weibull’s parameters.The fractography of the fatigue specimens showed that the fatigue cracks initiated around the surface defects produced by SLM and then propagated in an unstable manner.However,the presence of large SLM defects mainly influenced the crack initiation period and did not have a strong influence on the crack propagation.The obtained experimental results present a basis for further investigation of the fatigue behaviour of advanced materials and structures(e.g.cellular metamaterials)fabricated by additive manufacturing(AM).Especially,in the case of two-dimensional cellular structures,the cross-section of cellular struts is usually rectangular which corresponds to the specimen shape considered in this work.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 10875086 and 10775104)
文摘We propose a kinetic aggregation model where species A aggregates evolve by the catalysis-coagulation and the catalysis-fragmentation, while the catalyst aggregates of the same species B or C perform self-coagulation processes. By means of the generalized Smoluchowski rate equation based on the mean-field assumption, we study the kinetic behaviours of the system with the catalysis-coagulation rate kernel K（i,j;l） l^v and the catalysis-fragmentation rate kernel F（i,j; l） l^μ, where l is the size of the catalyst aggregate, and v and μ are two parameters reflecting the dependence of the catalysis reaction on the size of the catalyst aggregate. The relation between the values of parameters v and μ reflects the competing roles between the two catalysis processes in the kinetic evolution of species A. It is found that the competing roles of the catalysis-coagulation and catalysis-fragmentation in the kinetic aggregation behaviours are not determined simply by the relation between the two parameters v and μ, but also depend on the values of these two parameters. When v 〉 μ and v ≥0, the kinetic evolution of species A is dominated by the catalysis-coagulation and its aggregate size distribution αk（t） obeys the conventional or generalized scaling law; when v 〈 μ and v ≥ 0 or v 〈 0 but μ≥ 0, the catalysis-fragmentation process may play a dominating role and ak（t） approaches the scale-free form; and in other cases, a balance is established between the two competing processes at large times and ακ（t） obeys a modified scaling law.
基金Project(2006AA05Z132) supported by the National High-tech Research and Development Program of ChinaProjects(50871050,50701011) supported by the National Natural Science Foundation of China+1 种基金Project(200711020703) supported by Natural Science Foundation of Inner Mongolia,ChinaProject(NJzy08071) supported by High Education Science Research Program of Inner Mongolia,China
文摘The Mg2Ni-type alloys with nominal compositions of Mg20Ni10-xCox(x=0,1,2,3,4,%,mass fraction) were prepared by melt-spinning technology.The structures of the alloys were studied by XRD,SEM and HRTEM.The hydrogen absorption/desorption kinetics and the electrochemical performances of the alloys were measured.The results show that no amorphous phase forms in the as-spun Co-free alloy,but the as-spun alloys containing Co show a certain amount of amorphous phase.The hydrogen absorption capacities of the as-cast alloys first increase and then decrease with the incremental change of Co content.The hydrogen desorption capacities of as-cast and spun alloys rise with increasing Co content.The melt spinning significantly improves the hydrogenation and dehydrogenation capacities and kinetics of the alloys.The substitution of Co for Ni clearly enhances the discharge capacities of the alloys and the cycle stability of the as-spun alloys.
基金supported by the National Natural Science Foundation of China (Grant Nos. 20574052 and 20774066)the Program for New Century Excellent Talents in University, China (Grant No. NCET-05-0538)the Natural Science Foundation of Zhejiang Province, China (Grant Nos. R404047, Y4090174, and Y405553)
文摘The phase behaviours of diblock copolymers under cylindrical confinement are studied in two-dimensional space by using the self-consistent field theory. Several phase parameters are adjusted to investigate the cylindrical-confinement-induced phase behaviours of diblock copolymers. A series of lamella-cylinder mixture phases, such as the mixture of broken-lamellae and cylinders and the mixture of square-lamellae and cylinders, are observed by varying the phase parameters, in which the behaviours of these mixture phases are discussed in the corresponding phase diagrams. Furthermore, the free energies of these mixture phases are investigated to illustrate their evolution processes. Our results are compared with the available observations from the experiments and simulations respectively, and they are in good agreement and provide an insight into the phase behaviours under cylindrical confinement.
基金Under the auspices of National Natural Science Foundation of China(No.41801150,41571146,41801144)Natural Science Foundation of Guangdong Province(No.2018A030310392)+2 种基金Guangdong Planning Project of Philosophy and Social Science(No.GD17YGL01)Science and Technology Program of Guangzhou(No.201906010033)GDAS’(Guangdong Academy of Sciences)Project of Science and Technology Development(No.2020GDASYL-20200104007)。
文摘Mobile information and communication technologies(MICTs) have fully penetrated everyday life in smart societies;this has greatly compressed time, space, and distance, and consequently, reshaped residents’ travel behaviour patterns. As a new mode of shared mobility, the sharing bicycle offers a variety of options for the daily travel of urban residents. Extant studies have mainly examined the travel characteristics and influencing factors of public bicycles with piles, while the travel patterns for sharing bicycles and their driving mechanisms have been largely ignored. Using one week’s travel data for Mobike, this study investigated the spatial and temporal distribution patterns of sharing bicycle travel behaviours in the central urban area of Guangzhou, China;furthermore, it identified the influences of built environment density factors on sharing bicycle travel behaviours based on the geographically weighted regression method. Obvious morning and evening peaks were observed in the sharing bicycle travel patterns for both weekdays and weekends. The old urban area, which had a high degree of mixed function, dense road networks, and cycling-friendly built environments, was the main travel area that attracted sharing bicycles on both weekdays and weekends. Furthermore, factors including the point of interest(POI) for the density of public transport stations, the functional mixing degree, and the density of residential POIs significantly affected residents’ travel behaviours. These findings could enrich discourse regarding shared mobility with a Chinese case characterised by rapidly developing MICTs and also provide references to local authorities for improving slow traffic environments.
文摘Background Cyberbullying is presently an alarming problem worldwide due to its impact on the emotions,behaviour and psychological well-being of not only the victims,but the bullies themselves and also bystanders.Aim This study aims to investigate bystanders'behaviours in cyberbullying and associated factors.Methods This research is a cross-sectional study of 578 secondary school students in Bangkok,Thailand.Simple random sampling was used to select four secondary schools.Data were collected through online questionnaires which included four sections:(1)demographic data,(2)bystanders'behaviour in cyberbullying(cyberbullying experience and attitude towards cyberbullying were included in this section),(3)parental attachment(nventory of Parent Attachment-Revised),and(4)self-esteem(Rosenberg Self-Esteem Scale-Revised).Results It was found that most occurrences of bystanders'behaviour were:(a)willing to intervene or help victims(34.6%),(b)ignoring the cyberbullying(28%)or(c)partaking in cberbulling(263%).Participants who either were victims of cyberbullying or knew of cyberbullying happening to friends or relatives and had high parental attachment would intervene more than those Who never had such experiences.Participants Who knew of cyberbullying happening to the general public had tendencies towards ignoring the cyberbulying.Participants who indicated they were bullies and had positive atitude towards joining in tended to partake in the cyberbullying more than those who were not.Conclusion Factors relating to the behaviours of bystanders in cyberbullying should be further explored to provide support in the discouragement of ignoring and averting participation in cyberbullying.Secure parental attachment is one important factor that should be instilled during childhood years.
基金This study was financially supported by the National Natural Science Foundation of China(81822017,82171493,52003021)the Lingang Laboratory(LG-QS-202203-10)the Shanghai Municipal Education Commission-Gaofeng Clinical Medicine Grant Support(20181715).
文摘To the Editor,Non-human primate(NHP)models are advantageous for mimicking human addiction with high behavioural validity.1 However,current NHP drug addiction models(eg,self-administration)often require a comprehensive behavioural training paradigm,relatively expensive apparatus and invasive surgical procedures.
文摘Purpose:To investigate the knowledge and behaviours on foot self-care in patients with type 2 diabetes mellitus;analyse the influential factors,and provide information for the intervention study.Methods:A total of 5961 patients with type 2 diabetes mellitus from 144 hospitals in China were included in the study.The investigation content included patients'demographic data,foot self-care knowledge and behaviours.The investigation tools were the questionnaires on the general diabetes information,on the foot self-care knowledge,and on the foot selfcare behaviours.Results:The foot self-care knowledge was medium and the foot self-care behaviour was poor.The status of knowledge and behaviours were influenced by education,duration of diabetes mellitus,periodic inspection,and education about diabetic complications.Pearson analysis demonstrated that there was positive correlation between knowledge score and behaviour score(r?0.27,p<0.001).Conclusions:The status of foot self-care knowledge and behaviours are not optimistic.According to the patients'own characteristics,the theory of knowledge,attitude and practice applies to encouraging patients to go for periodic inspection and education about diabetic complications so as to enhance the knowledge and promote the self-care behaviours.
基金the financial support from the National Natural Science Foundation of China(Nos.52079077 and 52209141)the Natural Science Foundation of Shandong Province,China(No.ZR2021QE069).
文摘The asperity wear of rock joints significantly affects their shear behaviour.This study discusses the wear damage of the asperities on the joint surface,highlighting the roughness degradation characteristics during the shear process.The direct shear experiment of artificial specimens containing rock joints was conducted under different normal stresses based on three-dimensional scanning technology.These experimental results showed the contribution of joint wear to roughness degeneration,such as the height,zone,and volume of asperity degeneration.The wear coefficient of the rock joint was obtained based on the volume wear of asperities in the laboratory experiment.The functional relationship between the friction coefficient and wear coefficient is subsequently determined.To quantitatively analyse the wear damage of a joint surface,a calculation method for determining the wear depth of the rock joint after shearing was proposed based on wear theory.The relationship between the ultimate dilation and wear depth was analysed.A coefficient m,which can describe the damage degree of the joint surface,and a prediction method of joint surface roughness after shearing are established.Good agreement between analytical predictions and measured values demonstrates the capability of the developed model.Lastly,the sensitivity factors on the wear depth are explored.
基金support from the National Natural Science Foundation of China (No.52172407 and No.U19A20110)the Natural Science Foundation of Sichuan Province (No.2022NSFSC0415).
文摘Railway accidents,particularly serious derailments,can lead to catastrophic consequences.Therefore,it is essential to prevent derailment escalation to reduce the likelihood of severe derailments.Train post-derailment behaviours and containment methods play a critical role in preventing derailment escalation and providing passive safety protection and accident prevention in the event of a derailment.However,despite the increasing attention on this field from academia and industry in recent years,there is a lack of systematic exploration and summarization of emerging applications and containment methods in train post-derailment research.For this reason,this paper presents a comprehensive review of existing studies on train post-derailment behaviours,encompassing various topics such as post-derailment contact-impact models,dynamic modelling and simulation techniques,and the primary factors influencing post-derailment behaviours.Significantly,this review introduces and elucidates substitute guidance mechanisms(SGMs),which serve as railway-specific passive safety protection and accident prevention measures.The various types of SGMs are depicted,and their ongoing developments and applications are explored in depth.The review additionally points out several unresolved challenges including the adverse effects of SGMs,and proposes future research directions to advance the theoretical understanding and practical application of train post-derailment behaviours and containment methods.This review seeks to be a valuable reference for railway industry professionals in preventing catastrophic derailment consequences through post-derailment containment methods.
基金This study was supported by the Research Start-up Project for Introduced Talent of Yunnan University(No.20190043)the CNPC Key Laboratory of Carbonate Reservoirs Innovation Fund(No.RIPED-2020-JS-51020)。
文摘Recent decades have witnessed an increasing number of studies investigating petroleum systems with the application of rhenium-osmium(Re-Os) isotopic geochemistry. Here, we review the use of the 187 Re-187 Os geochronometer with respect to the geochemical behaviour of rhenium and osmium in hydrocarbon-related geological processes. The Re-Os budget in hydrocarbon source rock predominantly originates from natural water columns during its deposition. Open seawater tends to have a homogeneous Os isotopic composition because its residence time in seawater is longer than the time taken for ocean mixing. On the contrary, restricted water bodies(e.g., lakes) may have heterogeneous Os isotopic compositions due to the greater amount of terrigenous input. Hydrogenous Re and Os atoms are sequestered from the water body into sedimentary organic matter and transferred into crude oil through thermal maturation of organic matter. Thermal maturation likely does not significantly alter the Re-Os isotopic systematics of the source rock as a Re-Os isochron age of 442±21 Ma(2σ) is yielded in this study for over matured source rocks within the Silurian Longmaxi Formation from the Sichuan Basin. Re-Os atoms are mainly hosted by the highly polar/aggregating/aromatic asphaltenes in hydrocarbons, possibly chelating with organic complexes or occurring as metalloporphyrins. Resin and aromatic hydrocarbons also contribute to the Re-Os budget, but are 2 to 3 orders of magnitude lower than that of asphaltenes, whereas saturates do not contain appreciable Re-Os contents. The distribution of Re-Os atoms in hydrocarbons is heterogeneous because the duplicate analysis of pure single bitumen samples yields similar ^(187)Os/^(188)Os ratios whereas variable ^(187)Re/^(188)Os ratios. The Re-Os system in crude oils can be reset during transport away from the source rocks, with Os-rich organic fractions more readily expelled than Re-rich fractions. Contact with metal-rich fluids(e.g., hydrothermal fluid) or compositional changes related to asphaltene contents(e.g., deasphalting, biodegradation, thermal cracking and thermochemical sulphate reduction) are also likely to alter the Re-Os systematics in hydrocarbons. These geochemical features enable the ^(187)Re-^(187)Os isotopic system to have robust applicability for petroleum system investigations, which may use the Re-Os radiometric tool for:(1) stratigraphic correlation of source rocks,(2) dating geological events altering the asphaltene content in hydrocarbon such as hydrocarbon generation, thermochemical sulphate reduction, etc., and,(3) fingerprinting hydrocarbons. Regardless of the robustness of the ^(187)Re-^(187)Os geochronometer for petroleum system investigations, there are several pending questions such as partitioning between solid organic species or between organic matter and sulphide, chelating sites in hydrocarbons and Os isotopic equilibration between hydrocarbon subfractions. To improve the understanding of the Re-Os behaviour in petroleum systems, we underscore multi-proxies-based geochemistry(e.g., inorganic-organic geochemistry) and experimental studies(e.g., hydrous pyrolysis).
文摘Introduction: Sickle cell anaemia is a hereditary disease that combines physical and psychological manifestations, including suicidal tendencies. So far, to our knowledge, no study has been conducted on suicidal behaviours among people with sickle cell disease in Cameroon. This is what justifies our study on the prevalence and factors related to suicidal behaviors in our study population. Methods: We conducted a cross-sectional, analytical study of 171 sickle cell patients aged from 12 years upwards who came to the sickle cell disease care service of the Laquintinie Hospital in Douala, over a period of 6 months, that is, from 1 January to 31 June 2022. Data were collected using a structured questionnaire with questions on suicidal behaviours based on the “MINI” (Mini International Neuropsychiatric Interview). The data were processed using the SPSS 26.0 software. The related factors were studied in both a bivariate and multivariate analysis. Results: Female sickle cell patients accounted for 60.2% of the sample. The mean age was 23.36 ± 8.42 years. Suicidal ideation was prevalent in 56% of cases and 13% attempted suicide. The factors most associated with suicidal ideation were: primary level of education (OR = 0.08 (0.09 - 0.79);p = 0.03), feeling unworthy of life (OR = 0.40 (0.08 - 1.96);p = 0.02), not often being considered by those around them (OR = 2.97 (1.26 - 6.99);p = 0.01), lack of family support (OR = 0.34 (0.15 - 0.77);p = 0.01). Meanwhile, the factors associated with suicide attempts were: the fact of being rarely exposed to suicide-related media (OR = 4.17 (1.40 - 71.80);p = 0.03), and a constant feeling of sadness when returning home (OR = 18.02 (1.59 - 20.55);p = 0.01). Conclusion: More than half of sickle cell patients had had suicidal thoughts and 1/6 had made at least one suicide attempt, women and young adults being the most concerned. It is therefore necessary to ensure optimum psychological care for patients with sickle cell disease.
基金supported by the National Natural Science Foundation of China(Grant Nos.52034009 and 51974319)the Yue Qi Distinguished Scholar Project(Grant No.2020JCB01).
文摘The combination of the dipping effect and hydromechanical(H-M)coupling effect can easily lead to water inrush disasters in water-rich roadways with different dip angles in coal mines.Therefore,H-M coupling tests of bedded sandstones under identical osmotic pressure and various confining pressures were conducted.Then,the evolution curves of stress-strain,permeability and damage,macro-and mesoscopic failure characteristics were obtained.Subsequently,the mechanical behaviour was characterized,and finally the failure mechanism was revealed.The results showed that:(1)The failure of the sandstone with the bedding angle of 45°or 60°was the structure-dominant type,while that with the bedding angle of 0°,30°or 90°was the force-dominant type.(2)When the bedding angle was in the range of(0°,30°)or(45°,90°),the confining pressure played a dominant role in influencing the peak strength.However,withinβ∈(30°,45°),the bedding effect played a dominant role in the peak strength.(3)With the increase in bedding angle,the cohesion increased first,then decreased and finally increased,while the internal friction angle was the opposite.(4)When the bedding angle was 0°or 30°,the“water wedging”effect and the“bedding buckling”effect would lead to the forking or converging shear failure.When the bedding angle was 45°or 60°,the sliding friction effect would lead to the shear slipping failure.When the bedding angle was 90°,the combination of the“bedding buckling”effect and shear effect would lead to the mixed tension-shear failure.The above conclusions obtained are helpful for the prevention of water inrush disasters in water-rich roadways with different dips in coal mines.
基金Supported by EPSRC/FSC (EP/I502033/1) and Leverhulme Trust (ECF/40348), UK
文摘Two floating structures in close proximity are very commonly seen in offshore engineering. They are often subjected to steep waves and, therefore, the transient effects on their hydrodynamic features are of great concem. This paper uses the quasi arbitrary Lagrangian Eulerian finite element method （QALE-FEM）, based on the fully nonlinear potential theory （FNPT）, to numerically investigate the interaction between two 3-D floating structures, which undergo motions with 6 degrees of freedom （DOFs）, and are subjected to waves with different incident angles. The transient behaviours of floating structures, the effect of the accompanied structures, and the nonlinearity on the motion of and the wave loads on the structures are the main focuses of the study. The investigation reveals an important transient effects causing considerably larger structure motion than that in steady state. The results also indicate that the accompanied structure in close proximity enhances the interaction between different motion modes and results in stronger nonlinearity causing 2hal-order component to be of similar significance to the fundamental one.
