Formamidinium lead iodide(FAPbI_(3))perovskite exhibits an impressive X-ray absorption coefficient and a large carrier mobility-lifetime product(μτ),making it as a highly promising candidate for X-ray detection appl...Formamidinium lead iodide(FAPbI_(3))perovskite exhibits an impressive X-ray absorption coefficient and a large carrier mobility-lifetime product(μτ),making it as a highly promising candidate for X-ray detection application.However,the presence of larger FA^(+)cation induces to an expansion of the Pb-I octahedral framework,which unfortunately affects both the stability and charge carrier mobility of the corresponding devices.To address this challenge,we develop a novel low-dimensional(HtrzT)PbI_(3) perovskite featuring a conjugated organic cation(1H-1,2,4-Triazole-3-thiol,HtrzT^(+))which matches well with theα-FAPbI_(3) lattices in two-dimensional plane.Benefiting from the matched lattice between(HtrzT)PbI_(3) andα-FAPbI_(3),the anchored lattice enhances the Pb-I bond strength and effectively mitigates the inherent tensile strain of theα-FAPbI_(3) crystal lattice.The X-ray detector based on(HtrzT)PbI_(3)(1.0)/FAPbI_(3) device achieves a remarkable sensitivity up to 1.83×10^(5)μC Gy_(air)^(−1) cm^(−2),along with a low detection limit of 27.6 nGy_(air) s^(−1),attributed to the release of residual stress,and the enhancement in carrier mobility-lifetime product.Furthermore,the detector exhibits outstanding stability under X-ray irradiation with tolerating doses equivalent to nearly 1.17×10^(6) chest imaging doses.展开更多
The time-of-flight high-resolution neutron diffractometer(TREND)at the China Spallation Neutron Source(CSNS)has been successfully equipped with a large-area^(3)He tube array neutron detector,designed to achieve except...The time-of-flight high-resolution neutron diffractometer(TREND)at the China Spallation Neutron Source(CSNS)has been successfully equipped with a large-area^(3)He tube array neutron detector,designed to achieve exceptional resolution and uniformity.The detector system,comprising 14 banks and 134 modules with 1376^(3)He tubes,is optimized for highangle and medium-to-low-angle measurements.Advanced dual-end readout electronics ensure precise charge and timeof-flight measurements,while rigorous performance testing confirmed the system’s spatial resolution and uniformity.Insitu testing using polyethylene samples validated the detector’s operational stability,with counting rate deviations within 3.7%.The system also demonstrated excellent two-dimensional imaging capabilities and adaptability to various neutron wavelength ranges through harmonic division techniques.These results highlight the TREND detector system as a robust and versatile tool for high-resolution neutron diffraction studies.展开更多
Although three-dimensional metal halide perovskites are promising candidates for direct X-ray detection,the ion migration of perovskites seriously affects the detector stability.Herein,face-/edge-shared 3D heterometal...Although three-dimensional metal halide perovskites are promising candidates for direct X-ray detection,the ion migration of perovskites seriously affects the detector stability.Herein,face-/edge-shared 3D heterometallic glycinate hybrid perovskitoid Pb_(2)CuGly_(2)X_(4)(Gly=-O_(2)C-CH_(2)-NH_(2);X=Cl,Br)single crystals(SCs),in which the adjacent lead halide layers are linked by large-sized Cu(Gly)_(2)pillars,are synthesized in water.The Cu(Gly)_(2)pillars in combination with face-/edge-shared inorganic skeleton are found able to synergistically suppress the ion migration,delivering a high ion migration activation energy(Ea)of 1.06 eV.The Pb_(2)CuGly_(2)Cl_(4)SC X-ray detector displays extremely low dark current drift of 1.20×10^(-9)nA mm^(-1)s^(-1)V^(-1)under high electric field(120 V mm^(-1))and continuous X-ray irradiation(2.86 Gy),and a high sensitivity of 9,250μC Gy^(-1)cm^(-2)is also achieved.More excitingly,the Pb_(2)CuGly_(2)Cl_(4)nanocrystal can be easily dispersed in water and directly blade-coated on thin-film transistor(TFT)array substrate,and the obtained Pb_(2)CuGly_(2)Cl_(4)-based TFT array detector offers an X-ray imaging capability with spatial resolution of 2.2 lp mm^(-1).展开更多
The Tian Qin space-borne gravitational wave detector will orbit at an altitude of1.0×10^(5)km with an arm length of 1.7×10^(5)km,structured in an equilateral triangular satellite formation.The Tian Qin proje...The Tian Qin space-borne gravitational wave detector will orbit at an altitude of1.0×10^(5)km with an arm length of 1.7×10^(5)km,structured in an equilateral triangular satellite formation.The Tian Qin project delineates detailed requirements for orbit determination during both the launch phase and subsequent scientific experimentation.This paper pioneers the investigation of Precise Orbit Determination(POD)for Tian Qin utilizing the third generation of Bei Dou global navigation satellite system(BDS-3)Inter-Satellite Link(ISL)through simulation.By analyzing the visibility,the feasibility of using BDS-3 ISLs for Tian Qin POD is explored.Furthermore,a refined Solar Radiation Pressure(SRP)model is developed,and the POD accuracy of Tian Qin is assessed,considering factors such as arc length,ranging intervals,and error sources.The results indicate the following:(A)Visibility between Tian Qin and BDS-3 satellites is intermittent,with an average of 10.6 BDS-3 satellites visible to Tian Qin,and the average Root Mean Square(RMS)-value of Position Dilution of Precision(PDOP)for Tian Qin is 48.13.(B)POD accuracy improves with shorter ranging intervals.(C)The error in ephemeris is the dominant factor affecting the POD accuracy.(D)The establishment of three links between Tian Qin and the BDS-3 satellites satisfies the POD requirements of Tian Qin.With a ranging interval of 600 s and over a 7-day arc,the average three-Dimensional(3D)position accuracy of the three Tian Qin satellites is 1.35 m,while the 3D velocity accuracy is 0.08 mm/s.展开更多
A Compton camera prototype has been developed using a pixelated CZT detector with 4-by-4 pixels.Signals of the detector are read out by a VASTAT ASIC that is controlled by a self-developed DAQ board. The DAQ software ...A Compton camera prototype has been developed using a pixelated CZT detector with 4-by-4 pixels.Signals of the detector are read out by a VASTAT ASIC that is controlled by a self-developed DAQ board. The DAQ software is developed using LabVIEW, and the offline Compton imaging codes are written in C++. The prototype has been successfully calibrated, and its capabilities for source detection, spectroscopy, and Compton imaging have been demonstrated using a Cs-137 source.The angular resolution of the 662 keV line is 36° FWHM for the simple back-projection method and 9.6° FWHM for the MLEM reconstruction method. The system is ready to be extended to 11-by-11 pixels in the future, and a better imaging quality can be expected due to the better relative position resolution.展开更多
With respect to the gamma spectrum, the energy resolution improves with increase in energy. The counts of full energy peak change with energy, and this approximately complies with the Gaussian distribution. This study...With respect to the gamma spectrum, the energy resolution improves with increase in energy. The counts of full energy peak change with energy, and this approximately complies with the Gaussian distribution. This study mainly examines a method to deconvolve the LaBr_3:Ce gamma spectrum with a detector response matrix constructing algorithm based on energy resolution calibration.In the algorithm, the full width at half maximum(FWHM)of full energy peak was calculated by the cubic spline interpolation algorithm and calibrated by a square root of a quadratic function that changes with the energy. Additionally, the detector response matrix was constructed to deconvolve the gamma spectrum. Furthermore, an improved SNIP algorithm was proposed to eliminate the background. In the experiment, several independent peaks of ^(152)Eu,^(137)Cs, and ^(60)Co sources were detected by a LaBr_3:Ce scintillator that were selected to calibrate the energy resolution. The Boosted Gold algorithm was applied to deconvolve the gamma spectrum. The results showed that the peak position difference between the experiment and the deconvolution was within ± 2 channels and the relative error of peak area was approximately within 0.96–6.74%. Finally, a ^(133) Ba spectrum was deconvolved to verify the efficiency and accuracy of the algorithm in unfolding the overlapped peaks.展开更多
The small-angle neutron scattering(SANS)instrument,one of the first three instruments of the China Spallation Neutron Source(CSNS),is designed to probe the microscopic and mesoscopic structures of materials in the sca...The small-angle neutron scattering(SANS)instrument,one of the first three instruments of the China Spallation Neutron Source(CSNS),is designed to probe the microscopic and mesoscopic structures of materials in the scale range 1–100 nm.A large-area ^(3)He tube array detector has been constructed and operates at the CSNS SANS instrument since August 2018.It consists of 120 linear position-sensitive detector tubes,each 1 m in length and 8 mm in diameter,and filled with ^(3)He gas at 20 bar to obtain a high detection efficiency.The ^(3)He tubes were divided into ten modules,providing an overall area of 1000 mm×1020 mm with a high count rate capability.Because each tube is installed independently,the detector can be quickly repaired in situ by replacing damaged tubes.To reduce air scattering,the SANS detector must operate in a vacuum environment(0.1 mbar).An all-metal sealing technique was adopted to avoid high-voltage breakdown by ensuring a high-voltage connection and an electronic system working in an atmospheric environment.A position resolution of 7.8±0.1 mm(full width at maximum)is measured along the length of the tubes,with a high detection efficiency of 81±2% at 2A.Operating over the past four years,the detector appears to perform well and with a high stability,which supports the SANS instrument to finish approximately 200 user scientific programs.展开更多
Accurate salt dome detection from 3D seismic data is crucial to different seismic data analysis applications. We present a new edge based approach for salt dome detection in migrated 3D seismic data. The proposed algo...Accurate salt dome detection from 3D seismic data is crucial to different seismic data analysis applications. We present a new edge based approach for salt dome detection in migrated 3D seismic data. The proposed algorithm overcomes the drawbacks of existing edge-based techniques which only consider edges in the x （crossline） and y （inline） directions in 2D data and the x （crossline）, y （inline）, and z （time） directions in 3D data. The algorithm works by combining 3D gradient maps computed along diagonal directions and those computed in x, y, and z directions to accurately detect the boundaries of salt regions. The combination of x, y, and z directions and diagonal edges ensures that the proposed algorithm works well even if the dips along the salt boundary are represented only by weak reflectors. Contrary to other edge and texture based salt dome detection techniques, the proposed algorithm is independent of the amplitude variations in seismic data. We tested the proposed algorithm on the publicly available Netherlands offshore F3 block. The results suggest that the proposed algorithm can detect salt bodies with high accuracy than existing gradient based and texture-based techniques when used separately. More importantly, the proposed approach is shown to be computationally efficient allowing for real time implementation and deployment.展开更多
A semi-length focal plane detecting system for heavy ions has been built onthe Beijing Q3D magnetic spectrometer and tested by <sup>12</sup>C+<sup>197</sup>Au,<sup>16</sup>O+<sup...A semi-length focal plane detecting system for heavy ions has been built onthe Beijing Q3D magnetic spectrometer and tested by <sup>12</sup>C+<sup>197</sup>Au,<sup>16</sup>O+<sup>150</sup>Sm,and <sup>18</sup>O-<sup>156</sup>Gd reactions.The intrinsic resolutions of position and angle were 1.1 mmand 0.8°,respectively.The resolutions of energy loss ΔE,residual energy E<sub>R</sub> and totalenergy E<sub>T</sub> obtained were 3.0%,1.4% and 0.9%.respectively,after a special method ofdata processing was adopted.The achievable mass resolution is estimated to be about1.0% after necessary corrections for some signals concerned.Discussion aboul the edgeeffect of the detectors of this type is given too.展开更多
Usually, there are several methods, e.g. experiment, interpolation experiment-based, analytic function, and Monte-Carlo simulation, to calculate the response functions in LaBr3（Ce） detectors. In logging applications...Usually, there are several methods, e.g. experiment, interpolation experiment-based, analytic function, and Monte-Carlo simulation, to calculate the response functions in LaBr3（Ce） detectors. In logging applications, the experiment-based methods cannot be adopted because of their limitations. Analytic function has the advantage of fast calculating speed, but it is very difficult to take into account many effects that occur in practical applications. On the contrary, Monte-Carlo simulation can deal with physical and geometric configurations very tactfully. It has a distinct advantage for calculating the functions with complex configurations in borehole. A new application of LaBr3（Ce） detector is in natural gamma-rays borehole spectrometer for uranium well logging. Calculation of response functions must consider a series of physical and geometric factors under complex logging conditions, including earth formations and its relevant parameters, different energies, material and thickness of the casings, the fluid between the two tubes, and relative position of the LaBr3（Ce） crystal to steel ingot at the front of logging tube. The present work establishes Monte-Carlo simulation models for the above-mentioned situations, and then performs calculations for main gamma-rays from natural radio-elements series. The response functions can offer experimental directions for the design of borehole detection system, and provide technique basis and basic data for spectral analysis of natural gamma-rays, and for sonrceless calibration in uranium quantitative interpretation.展开更多
基金supports from the National Natural Science Foundation of China(22375220,U2001214,22471302)the Guangdong Basic and Applied Basic Research Foundation(2024B1515020101)Open Project Fund from State Key Laboratory of Optoelectronic Materials and Technologies(OEMT-2024-KF-08).
文摘Formamidinium lead iodide(FAPbI_(3))perovskite exhibits an impressive X-ray absorption coefficient and a large carrier mobility-lifetime product(μτ),making it as a highly promising candidate for X-ray detection application.However,the presence of larger FA^(+)cation induces to an expansion of the Pb-I octahedral framework,which unfortunately affects both the stability and charge carrier mobility of the corresponding devices.To address this challenge,we develop a novel low-dimensional(HtrzT)PbI_(3) perovskite featuring a conjugated organic cation(1H-1,2,4-Triazole-3-thiol,HtrzT^(+))which matches well with theα-FAPbI_(3) lattices in two-dimensional plane.Benefiting from the matched lattice between(HtrzT)PbI_(3) andα-FAPbI_(3),the anchored lattice enhances the Pb-I bond strength and effectively mitigates the inherent tensile strain of theα-FAPbI_(3) crystal lattice.The X-ray detector based on(HtrzT)PbI_(3)(1.0)/FAPbI_(3) device achieves a remarkable sensitivity up to 1.83×10^(5)μC Gy_(air)^(−1) cm^(−2),along with a low detection limit of 27.6 nGy_(air) s^(−1),attributed to the release of residual stress,and the enhancement in carrier mobility-lifetime product.Furthermore,the detector exhibits outstanding stability under X-ray irradiation with tolerating doses equivalent to nearly 1.17×10^(6) chest imaging doses.
基金supported by the National Natural Science Foundation of China through the Young Fund Project titled“Research on Polarized Neutron Detector System”(Project Approval No.12205326)support was provided by the Guangdong Major Project of Basic and Applied Basic Research(Grant No.2023B0303000003)the Guangdong Provincial Key Laboratory of Advanced Particle Detection Technology(Grant No.2024B1212010005).
文摘The time-of-flight high-resolution neutron diffractometer(TREND)at the China Spallation Neutron Source(CSNS)has been successfully equipped with a large-area^(3)He tube array neutron detector,designed to achieve exceptional resolution and uniformity.The detector system,comprising 14 banks and 134 modules with 1376^(3)He tubes,is optimized for highangle and medium-to-low-angle measurements.Advanced dual-end readout electronics ensure precise charge and timeof-flight measurements,while rigorous performance testing confirmed the system’s spatial resolution and uniformity.Insitu testing using polyethylene samples validated the detector’s operational stability,with counting rate deviations within 3.7%.The system also demonstrated excellent two-dimensional imaging capabilities and adaptability to various neutron wavelength ranges through harmonic division techniques.These results highlight the TREND detector system as a robust and versatile tool for high-resolution neutron diffraction studies.
基金financially supported by the National Natural Science Foundation of China (62004089,62374053, 62474187 and 12235006)the Special Zone Support Program for Outstanding Talents of Henan University+4 种基金the Shenzhen Basic Research Program (JCYJ20220818101612027)the Guangdong Basic and Applied Basic Research Foundation (2024A1515012494)the Henan Province Postdoctoral Science Foundation (J23029Y)the Natural Science Foundation of Henan Province (232300420412)the Science and Technology Tackling Project of Henan Province (242102210160)
文摘Although three-dimensional metal halide perovskites are promising candidates for direct X-ray detection,the ion migration of perovskites seriously affects the detector stability.Herein,face-/edge-shared 3D heterometallic glycinate hybrid perovskitoid Pb_(2)CuGly_(2)X_(4)(Gly=-O_(2)C-CH_(2)-NH_(2);X=Cl,Br)single crystals(SCs),in which the adjacent lead halide layers are linked by large-sized Cu(Gly)_(2)pillars,are synthesized in water.The Cu(Gly)_(2)pillars in combination with face-/edge-shared inorganic skeleton are found able to synergistically suppress the ion migration,delivering a high ion migration activation energy(Ea)of 1.06 eV.The Pb_(2)CuGly_(2)Cl_(4)SC X-ray detector displays extremely low dark current drift of 1.20×10^(-9)nA mm^(-1)s^(-1)V^(-1)under high electric field(120 V mm^(-1))and continuous X-ray irradiation(2.86 Gy),and a high sensitivity of 9,250μC Gy^(-1)cm^(-2)is also achieved.More excitingly,the Pb_(2)CuGly_(2)Cl_(4)nanocrystal can be easily dispersed in water and directly blade-coated on thin-film transistor(TFT)array substrate,and the obtained Pb_(2)CuGly_(2)Cl_(4)-based TFT array detector offers an X-ray imaging capability with spatial resolution of 2.2 lp mm^(-1).
基金co-supported by the Guangdong Major Project of Basic and Applied Basic Research,China(No.2019B030302001)the Guangdong Basic and Applied Basic Research Foundation,China(No.2022A1515110236)the Fundamental Research Funds for the Central Universities,Sun Yat-Sen University,China(No.23xkjc001)。
文摘The Tian Qin space-borne gravitational wave detector will orbit at an altitude of1.0×10^(5)km with an arm length of 1.7×10^(5)km,structured in an equilateral triangular satellite formation.The Tian Qin project delineates detailed requirements for orbit determination during both the launch phase and subsequent scientific experimentation.This paper pioneers the investigation of Precise Orbit Determination(POD)for Tian Qin utilizing the third generation of Bei Dou global navigation satellite system(BDS-3)Inter-Satellite Link(ISL)through simulation.By analyzing the visibility,the feasibility of using BDS-3 ISLs for Tian Qin POD is explored.Furthermore,a refined Solar Radiation Pressure(SRP)model is developed,and the POD accuracy of Tian Qin is assessed,considering factors such as arc length,ranging intervals,and error sources.The results indicate the following:(A)Visibility between Tian Qin and BDS-3 satellites is intermittent,with an average of 10.6 BDS-3 satellites visible to Tian Qin,and the average Root Mean Square(RMS)-value of Position Dilution of Precision(PDOP)for Tian Qin is 48.13.(B)POD accuracy improves with shorter ranging intervals.(C)The error in ephemeris is the dominant factor affecting the POD accuracy.(D)The establishment of three links between Tian Qin and the BDS-3 satellites satisfies the POD requirements of Tian Qin.With a ranging interval of 600 s and over a 7-day arc,the average three-Dimensional(3D)position accuracy of the three Tian Qin satellites is 1.35 m,while the 3D velocity accuracy is 0.08 mm/s.
文摘A Compton camera prototype has been developed using a pixelated CZT detector with 4-by-4 pixels.Signals of the detector are read out by a VASTAT ASIC that is controlled by a self-developed DAQ board. The DAQ software is developed using LabVIEW, and the offline Compton imaging codes are written in C++. The prototype has been successfully calibrated, and its capabilities for source detection, spectroscopy, and Compton imaging have been demonstrated using a Cs-137 source.The angular resolution of the 662 keV line is 36° FWHM for the simple back-projection method and 9.6° FWHM for the MLEM reconstruction method. The system is ready to be extended to 11-by-11 pixels in the future, and a better imaging quality can be expected due to the better relative position resolution.
基金supported by the National Natural Science Foundation of China(Nos.41374130 and 41604154)
文摘With respect to the gamma spectrum, the energy resolution improves with increase in energy. The counts of full energy peak change with energy, and this approximately complies with the Gaussian distribution. This study mainly examines a method to deconvolve the LaBr_3:Ce gamma spectrum with a detector response matrix constructing algorithm based on energy resolution calibration.In the algorithm, the full width at half maximum(FWHM)of full energy peak was calculated by the cubic spline interpolation algorithm and calibrated by a square root of a quadratic function that changes with the energy. Additionally, the detector response matrix was constructed to deconvolve the gamma spectrum. Furthermore, an improved SNIP algorithm was proposed to eliminate the background. In the experiment, several independent peaks of ^(152)Eu,^(137)Cs, and ^(60)Co sources were detected by a LaBr_3:Ce scintillator that were selected to calibrate the energy resolution. The Boosted Gold algorithm was applied to deconvolve the gamma spectrum. The results showed that the peak position difference between the experiment and the deconvolution was within ± 2 channels and the relative error of peak area was approximately within 0.96–6.74%. Finally, a ^(133) Ba spectrum was deconvolved to verify the efficiency and accuracy of the algorithm in unfolding the overlapped peaks.
基金supported by the National Key R&D Program of China(No.2021YFA1600703)the National Natural Science Foundation of China(No.12175254)+2 种基金the Youth Innovation Promotion Association CASthe China Spallation Neutron Source Projectthe Innovative Projects of the IHEP(No.E15459U210).
文摘The small-angle neutron scattering(SANS)instrument,one of the first three instruments of the China Spallation Neutron Source(CSNS),is designed to probe the microscopic and mesoscopic structures of materials in the scale range 1–100 nm.A large-area ^(3)He tube array detector has been constructed and operates at the CSNS SANS instrument since August 2018.It consists of 120 linear position-sensitive detector tubes,each 1 m in length and 8 mm in diameter,and filled with ^(3)He gas at 20 bar to obtain a high detection efficiency.The ^(3)He tubes were divided into ten modules,providing an overall area of 1000 mm×1020 mm with a high count rate capability.Because each tube is installed independently,the detector can be quickly repaired in situ by replacing damaged tubes.To reduce air scattering,the SANS detector must operate in a vacuum environment(0.1 mbar).An all-metal sealing technique was adopted to avoid high-voltage breakdown by ensuring a high-voltage connection and an electronic system working in an atmospheric environment.A position resolution of 7.8±0.1 mm(full width at maximum)is measured along the length of the tubes,with a high detection efficiency of 81±2% at 2A.Operating over the past four years,the detector appears to perform well and with a high stability,which supports the SANS instrument to finish approximately 200 user scientific programs.
基金supported by the Center for Energy and Geo Processing(CeGP) at King Fahd University of Petroleum&Minerals(KFUPM),under Project no.GTEC 1401-1402
文摘Accurate salt dome detection from 3D seismic data is crucial to different seismic data analysis applications. We present a new edge based approach for salt dome detection in migrated 3D seismic data. The proposed algorithm overcomes the drawbacks of existing edge-based techniques which only consider edges in the x （crossline） and y （inline） directions in 2D data and the x （crossline）, y （inline）, and z （time） directions in 3D data. The algorithm works by combining 3D gradient maps computed along diagonal directions and those computed in x, y, and z directions to accurately detect the boundaries of salt regions. The combination of x, y, and z directions and diagonal edges ensures that the proposed algorithm works well even if the dips along the salt boundary are represented only by weak reflectors. Contrary to other edge and texture based salt dome detection techniques, the proposed algorithm is independent of the amplitude variations in seismic data. We tested the proposed algorithm on the publicly available Netherlands offshore F3 block. The results suggest that the proposed algorithm can detect salt bodies with high accuracy than existing gradient based and texture-based techniques when used separately. More importantly, the proposed approach is shown to be computationally efficient allowing for real time implementation and deployment.
文摘A semi-length focal plane detecting system for heavy ions has been built onthe Beijing Q3D magnetic spectrometer and tested by <sup>12</sup>C+<sup>197</sup>Au,<sup>16</sup>O+<sup>150</sup>Sm,and <sup>18</sup>O-<sup>156</sup>Gd reactions.The intrinsic resolutions of position and angle were 1.1 mmand 0.8°,respectively.The resolutions of energy loss ΔE,residual energy E<sub>R</sub> and totalenergy E<sub>T</sub> obtained were 3.0%,1.4% and 0.9%.respectively,after a special method ofdata processing was adopted.The achievable mass resolution is estimated to be about1.0% after necessary corrections for some signals concerned.Discussion aboul the edgeeffect of the detectors of this type is given too.
基金supported by Key Laboratory of Radioactive Geology and Exploration Technology Fundamental Science for National Defense(No. 2011RGET04)East China Institute of Technology, and National Natural Science Foundation of China (No. 41074078)
文摘Usually, there are several methods, e.g. experiment, interpolation experiment-based, analytic function, and Monte-Carlo simulation, to calculate the response functions in LaBr3（Ce） detectors. In logging applications, the experiment-based methods cannot be adopted because of their limitations. Analytic function has the advantage of fast calculating speed, but it is very difficult to take into account many effects that occur in practical applications. On the contrary, Monte-Carlo simulation can deal with physical and geometric configurations very tactfully. It has a distinct advantage for calculating the functions with complex configurations in borehole. A new application of LaBr3（Ce） detector is in natural gamma-rays borehole spectrometer for uranium well logging. Calculation of response functions must consider a series of physical and geometric factors under complex logging conditions, including earth formations and its relevant parameters, different energies, material and thickness of the casings, the fluid between the two tubes, and relative position of the LaBr3（Ce） crystal to steel ingot at the front of logging tube. The present work establishes Monte-Carlo simulation models for the above-mentioned situations, and then performs calculations for main gamma-rays from natural radio-elements series. The response functions can offer experimental directions for the design of borehole detection system, and provide technique basis and basic data for spectral analysis of natural gamma-rays, and for sonrceless calibration in uranium quantitative interpretation.
