Based on the maximum entropy principle a new probability density function （PDF） f（x） for the surface elevation of nonlinear sea waves, X, is derived through performing a coordinate transform of X and solving a var...Based on the maximum entropy principle a new probability density function （PDF） f（x） for the surface elevation of nonlinear sea waves, X, is derived through performing a coordinate transform of X and solving a variation problem subject to three constraint conditions of f（ x ）. Compared with the maximum entropy PDFs presented previously, the new PDF has the following merits： （1） it has four parameters to be determined and hence can give more refined fit to observed data and has wider suitability for nonlinear waves in different conditions; （2） these parameters are expressed in terms of distribution moments of X in a relatively simple form and hence are easy to be determined from observed data; （3） the PDF is free of the restriction of weak nonlinearity and possible to be used for sea waves in complicated conditions, such as those in shallow waters with complicated topography; and （4） the PDF is simple in form and hence convenient for theoretical and practical uses. l.aboratory wind-wave experiments have been conducted to test the competence of the new PDF for the surface elevation of nonlinear waves. The experimental results manifest that the new PDF gives somewhat better fit to the laboratory wind-wave data than the well-known Gram-Charlier PDF and beta PDF.展开更多
Classic maximum entropy quantile function method （CMEQFM） based on the probability weighted moments （PWMs） can accurately estimate the quantile function of random variable on small samples, but inaccurately on the...Classic maximum entropy quantile function method （CMEQFM） based on the probability weighted moments （PWMs） can accurately estimate the quantile function of random variable on small samples, but inaccurately on the very small samples. To overcome this weakness, least square maximum entropy quantile function method （LSMEQFM） and that with constraint condition （LSMEQFMCC） are proposed. To improve the confidence level of quantile function estimation, scatter factor method is combined with maximum entropy method to estimate the confidence interval of quantile function. From the comparisons of these methods about two common probability distributions and one engineering application, it is showed that CMEQFM can estimate the quantile function accurately on the small samples but inaccurately on the very small samples （10 samples）; LSMEQFM and LSMEQFMCC can be successfully applied to the very small samples; with consideration of the constraint condition on quantile function, LSMEQFMCC is more stable and computationally accurate than LSMEQFM; scatter factor confidence interval estimation method based on LSMEQFM or LSMEQFMCC has good estimation accuracy on the confidence interval of quantile function, and that based on LSMEQFMCC is the most stable and accurate method on the very small samples （10 samples）.展开更多
Maximum entropy deconvolution is presented to estimate receiver function, with the maximum entropy as the rule to determine auto-correlation and cross-correlation functions. The Toeplitz equation and Levinson algorith...Maximum entropy deconvolution is presented to estimate receiver function, with the maximum entropy as the rule to determine auto-correlation and cross-correlation functions. The Toeplitz equation and Levinson algorithm are used to calculate the iterative formula of error-predicting filter, and receiver function is then estimated. During extrapolation, reflective coefficient is always less than 1, which keeps maximum entropy deconvolution stable. The maximum entropy of the data outside window increases the resolution of receiver function. Both synthetic and real seismograms show that maximum entropy deconvolution is an effective method to measure receiver function in time-domain.展开更多
The maximum of k numerical functions defined on , , by , ??is used here in Statistical classification. Previously, it has been used in Statistical Discrimination [1] and in Clustering [2]. We present first some theore...The maximum of k numerical functions defined on , , by , ??is used here in Statistical classification. Previously, it has been used in Statistical Discrimination [1] and in Clustering [2]. We present first some theoretical results on this function, and then its application in classification using a computer program we have developed. This approach leads to clear decisions, even in cases where the extension to several classes of Fisher’s linear discriminant function fails to be effective.展开更多
AIM: Recently, drinking load tests with water or nutritional beverages have been proposed as diagnostic tools for functional dyspepsia (FD), therefore we sought to reproduce if these tests can discriminate between FD ...AIM: Recently, drinking load tests with water or nutritional beverages have been proposed as diagnostic tools for functional dyspepsia (FD), therefore we sought to reproduce if these tests can discriminate between FD patients and controls in a Mexican population. METHODS: Twenty FD-Rome Ⅱ patients were matched by age and gender with 20 healthy controls. All underwent both drinking tests at a 15 mL/min rate, randomly, 7 d apart. Every 5 min within each test, four symptoms were evaluated (satiety, bloating, nausea and pain) by Likert scales. Maximum tolerated volume (MTV) was defined as the ingested volume when a score of 5 was reached for any symptom or when the test had to be stopped because the patients could not tolerate more volume. Sensitivity and specificity were analyzed. RESULTS: FD patients had higher symptom scores for both tests compared to controls (water: t= 4.1, P= 0.001 ＜0.01; Nutren(R): t= 5.2, P= 0.001＜0.01). The MTV forwater and Nutren(R) were significantly lower in FD (water: 1014±288 vs 1749±275 mL; t = 7.9, P = 0.001＜0.01;Nutren(R): 652±168 vs 1278±286 mL; t= 6.7, P = 0.001＜0.01). With the volume tolerated by the controls, the percentile 10 was determined as the lower limit fortolerance. Sensitivity and specificity were 0.90, 0.95 for water and 0.95, 0.95 for Nutren(R) tests.CONCLUSION: A drinking test with water or a nutritional beverage can discriminate between FD patients and healthy subjects in Mexico, with high sensitivity and specificity. These tests could be used as objective, noninvasive, and safe diagnostic approaches for FD patients.展开更多
This paper describes and explores a maximum-entropy approach to continuous minimax problem, which is applicable in many fields, such as transportation planning and game theory. It illustrates that the maximum entropy ...This paper describes and explores a maximum-entropy approach to continuous minimax problem, which is applicable in many fields, such as transportation planning and game theory. It illustrates that the maximum entropy approcach has easy framework and proves that every accumulation of {x_k} generated by maximum-entropy programming is -optimal solution of initial continuous minimax problem. The paper also explains BFGS or TR method for it. Two numerical exam.ples for continuous minimax problem are展开更多
This paper focuses on the continuity of the truncated Hardy-Littlewood maximal function.We first show that the truncated Hardy-Littlewood maximal function is lower semi-continuous.Then by investigating the behavior of...This paper focuses on the continuity of the truncated Hardy-Littlewood maximal function.We first show that the truncated Hardy-Littlewood maximal function is lower semi-continuous.Then by investigating the behavior of the truncated Hardy-Littlewood maximal function when the truncated parameterγchanges,we obtain an equivalent condition of the continuity of the truncated Hardy-Littlewood maximal function.展开更多
Treatment of skeletal Cl II includes functional orthopedic treatment, head-gears, extraction of the upper premolars and orthognathic surgery. To treat any patient with functional appliances (bite jumping) an adequate ...Treatment of skeletal Cl II includes functional orthopedic treatment, head-gears, extraction of the upper premolars and orthognathic surgery. To treat any patient with functional appliances (bite jumping) an adequate overjet is necessary. In this case an 11 years old female patient has skeletal CLII due to mandibular deficiency with ANB angle 8 degrees, overbite: 3 mm, overjet: 1 mm, extremely convex profile and underdeveloped chin due to the hyper muscle contraction of the lower lip to obtain oral seal. To obtain an adequate overjet lower first premolars were extracted and maximum retraction using mini screws (for maximum anchorage) was applied. Afterwards Rahhal functional appliance was used by the patient 16 hours a day for 6 months and 10 hours a day for another 6 months for retention. After that fixed orthodontic treatment was completed. Lateral cephalometrics were taken, traced and analyzed. In the result Skeletal CLI was obtained (ANB 4 degree), straight facial profile, normal over bite overjet and particular chin development were noticed. As a conclusion, in skeletal CLII malocclusions, lower incisor protrusion will cause a contraindication for functional treatment. Extraction of the lower premolars and retraction of the lower incisors followed by functional orthopedic treatment is an efficient method to treat these cases instead of waiting for orthognathic surgery, also reducing the muscle pressure on the chin will change the development characteristics of it.展开更多
Objectives To compare respiratory parameters of peripheral blood mononuclear cell mitochondria and iron metabolism indicators in patients with different NYHA functional classes of ischemic heart failure(HF).Methods Th...Objectives To compare respiratory parameters of peripheral blood mononuclear cell mitochondria and iron metabolism indicators in patients with different NYHA functional classes of ischemic heart failure(HF).Methods This single center, prospective, non-blinded study enrolled 20 patients with diagnosed chronic HF of ischemic genesis with reduced and mildly reduced left ventricle ejection fraction. The maximum oxygen consumption at the peak of the exercise test(VO2peak), iron metabolism parameters and respiratory activity of peripheral blood mononuclear cell mitochondria were assessed.Results Among the patients, a half of individuals were diagnosed with iron deficiency. Subgroups of patients with different HF severity did not significant differ in VO2peak(P=0.209), serum iron(P=0.468) and ferritin(P=0.235) levels. But there was a trend in increasing in these parameters with increasing NYHA HF functional class. Respiratory control coefficient(RC) in NADdependent and FAD-dependent mitochondrial oxidation were lower in patients with NYHA HF Ⅲ functional class compared to individuals with NYHA HF I functional class(P=0.028 and P=0.040, respectively). Serum iron(P=0.026), ferritin(P=0.045)levels, transferrin saturation(P=0.006) were negatively correlated with RC in NAD-dependent mitochondrial oxidation.Conclusions In aggravation of ischemic HF NYHA FC, there is a decrease in RC of PBMC mitochondria during the oxidation of NAD-dependent and FAD-dependent substrates. In the whole sample, patients with laboratory-confirmed iron deficiency accounted a half of the total number. Iron metabolism parameters had a paradoxical inverse relationship with the level of RC in PBMC mitochondria of patients with HF.展开更多
We present a computer-modeling framework for photovoltaic(PV)source emulation that preserves the exact single-diode physics while enabling iteration-free,real-time evaluation.We derive two closed-form explicit solvers...We present a computer-modeling framework for photovoltaic(PV)source emulation that preserves the exact single-diode physics while enabling iteration-free,real-time evaluation.We derive two closed-form explicit solvers based on the Lambert W function:a voltage-driven V-Lambert solver for high-fidelity I–V computation and a resistance-driven R-Lambert solver designed for seamless integration in a closed-loop PV emulator.Unlike Taylor-linearized explicit models,our proposed formulation retains the exponential nonlinearity of the PV equations.It employs a numerically stable analytical evaluation that eliminates the need for lookup tables and root-finding,all while maintaining limited computational costs and a small memory footprint.The R-Lambert model is integrated into a buck-converter emulator equipped with a discrete PI regulator,which generates current references directly from sensed operating points,thus supporting hardware-constrained implementation.Comprehensive numerical experiments conducted on six commercial modules from various technologies(mono,poly,and multicrystalline)demonstrate significant accuracy improvements under the IEC EN 50530 near-MPP criterion:the V-Lambert solver reduces the±10%Vmpp band error by up to 61 times compared to an explicit-model baseline.Dynamic simulations under varying irradiance,temperature,and load conditions achieve millisecond-scale settling with accurate trajectory tracking.Additionally,processor-in-the-loop experimental validation on an embedded microcontroller supports the simulation results.By unifying exact analytical modeling with embedded realization,this work advances computer modeling for PV emulation,MPPT benchmarking,and controller verification in integrated renewable energy systems.展开更多
A new method for estimating the n (50 or 100) -year return-period waveheight, namely, the extreme waveheight expected to occur in n years, is presented on the basis of the maximum entropy principle. The main p...A new method for estimating the n (50 or 100) -year return-period waveheight, namely, the extreme waveheight expected to occur in n years, is presented on the basis of the maximum entropy principle. The main points of the method are as follows: (1) based on the Hamiltonian principle, a maximum entropy probability density function for the extreme waveheight H, f(H)=αHγ e -βH4 is derived from a Lagrangian function subject to some necessary and rational constraints; (2) the parameters α, β, and γ in the function are expressed in terms of the mean , variance V= (H-)2 and bias B= (H-)3 ; and (3) with , V and B estimated from observed data, the n -year return-period wave height H n is computed in accordance with the formula 11-F(H n)=n , where F(H n) is defined as F(H n)=∫ H n 0f(H) d H. Examples of estimating the 50 and 100-year return period waveheights by the present method and by some currently used method from observed data acquired from two hydrographic stations are given. A comparison of the estimated results shows that the present method is superior to the others.展开更多
Based on the maximum entropy principle, a probability density function (PDF) is derived for the distribution of wave heights in a random wave field, without any more hypothesis. The present PDF, being a non-Rayleigh f...Based on the maximum entropy principle, a probability density function (PDF) is derived for the distribution of wave heights in a random wave field, without any more hypothesis. The present PDF, being a non-Rayleigh form, involves two parameters: the average wave height H— and the state parameter γ. The role of γ in the distribution of wave heights is examined. It is found that γ may be a certain measure of sea state. A least square method for determining γ from measured data is proposed. In virtue of the method, the values of γ are determined for three sea states from the data measured in the East China Sea. The present PDF is compared with the well known Rayleigh PDF of wave height and it is shown that it much better fits the data than the Rayleigh PDF. It is expected that the present PDF would fit some other wave variables, since its derivation is not restricted only to the wave height.展开更多
The IMC(Internal Model Control) controller based on robust tuning can improve the robustness and dynamic performance of the system.In this paper,the robustness degree of the control system is investigated based on Max...The IMC(Internal Model Control) controller based on robust tuning can improve the robustness and dynamic performance of the system.In this paper,the robustness degree of the control system is investigated based on Maximum Sensitivity(Ms) in depth.And the analytical relationship is obtained between the robustness specification and controller parameters,which gives a clear design criterion to robust IMC controller.Moreover,a novel and simple IMC-PID(Proportional-Integral-Derivative) tuning method is proposed by converting the IMC controller to PID form in terms of the time domain rather than the frequency domain adopted in some conventional IMC-based methods.Hence,the presented IMC-PID gives a good performance with a specific robustness degree.The new IMC-PID method is compared with other classical IMC-PID rules,showing the flexibility and feasibility for a wide range of plants.展开更多
Stroke patients with hemiplegia exhibit flexor spasms in the upper limb and extensor spasms in the lower limb, and their movement patterns vary greatly. Constraint-induced movement therapy is an upper limb rehabilitat...Stroke patients with hemiplegia exhibit flexor spasms in the upper limb and extensor spasms in the lower limb, and their movement patterns vary greatly. Constraint-induced movement therapy is an upper limb rehabilitation technique used in stroke patients with hemiplegia; however, studies of lower extremity rehabilitation are scarce. In this study, stroke patients with lower limb hemiplegia underwent conventional Bobath therapy for 4 weeks as baseline treatment, followed by constraint-induced movement therapy for an additional 4 weeks. The 10-m maximum walking speed and Berg balance scale scores significantly improved following treatment, and lower extremity motor function also improved. The results of functional MRI showed that constraint-induced movement therapy alleviates the reduction in cerebral functional activation in patients, which indicates activation of functional brain regions and a significant increase in cerebral blood perfusJon. These results demonstrate that constraint-induced movement therapy promotes brain functional reorganization in stroke patients with lower limb hemiplegia.展开更多
基金This workis financially supported by the National Natural Science Foundation of China (Grant No.40490263 andNo.40276006)
文摘Based on the maximum entropy principle a new probability density function （PDF） f（x） for the surface elevation of nonlinear sea waves, X, is derived through performing a coordinate transform of X and solving a variation problem subject to three constraint conditions of f（ x ）. Compared with the maximum entropy PDFs presented previously, the new PDF has the following merits： （1） it has four parameters to be determined and hence can give more refined fit to observed data and has wider suitability for nonlinear waves in different conditions; （2） these parameters are expressed in terms of distribution moments of X in a relatively simple form and hence are easy to be determined from observed data; （3） the PDF is free of the restriction of weak nonlinearity and possible to be used for sea waves in complicated conditions, such as those in shallow waters with complicated topography; and （4） the PDF is simple in form and hence convenient for theoretical and practical uses. l.aboratory wind-wave experiments have been conducted to test the competence of the new PDF for the surface elevation of nonlinear waves. The experimental results manifest that the new PDF gives somewhat better fit to the laboratory wind-wave data than the well-known Gram-Charlier PDF and beta PDF.
文摘Classic maximum entropy quantile function method （CMEQFM） based on the probability weighted moments （PWMs） can accurately estimate the quantile function of random variable on small samples, but inaccurately on the very small samples. To overcome this weakness, least square maximum entropy quantile function method （LSMEQFM） and that with constraint condition （LSMEQFMCC） are proposed. To improve the confidence level of quantile function estimation, scatter factor method is combined with maximum entropy method to estimate the confidence interval of quantile function. From the comparisons of these methods about two common probability distributions and one engineering application, it is showed that CMEQFM can estimate the quantile function accurately on the small samples but inaccurately on the very small samples （10 samples）; LSMEQFM and LSMEQFMCC can be successfully applied to the very small samples; with consideration of the constraint condition on quantile function, LSMEQFMCC is more stable and computationally accurate than LSMEQFM; scatter factor confidence interval estimation method based on LSMEQFM or LSMEQFMCC has good estimation accuracy on the confidence interval of quantile function, and that based on LSMEQFMCC is the most stable and accurate method on the very small samples （10 samples）.
基金State Natural Science Foundation of China (49974021).
文摘Maximum entropy deconvolution is presented to estimate receiver function, with the maximum entropy as the rule to determine auto-correlation and cross-correlation functions. The Toeplitz equation and Levinson algorithm are used to calculate the iterative formula of error-predicting filter, and receiver function is then estimated. During extrapolation, reflective coefficient is always less than 1, which keeps maximum entropy deconvolution stable. The maximum entropy of the data outside window increases the resolution of receiver function. Both synthetic and real seismograms show that maximum entropy deconvolution is an effective method to measure receiver function in time-domain.
文摘The maximum of k numerical functions defined on , , by , ??is used here in Statistical classification. Previously, it has been used in Statistical Discrimination [1] and in Clustering [2]. We present first some theoretical results on this function, and then its application in classification using a computer program we have developed. This approach leads to clear decisions, even in cases where the extension to several classes of Fisher’s linear discriminant function fails to be effective.
文摘AIM: Recently, drinking load tests with water or nutritional beverages have been proposed as diagnostic tools for functional dyspepsia (FD), therefore we sought to reproduce if these tests can discriminate between FD patients and controls in a Mexican population. METHODS: Twenty FD-Rome Ⅱ patients were matched by age and gender with 20 healthy controls. All underwent both drinking tests at a 15 mL/min rate, randomly, 7 d apart. Every 5 min within each test, four symptoms were evaluated (satiety, bloating, nausea and pain) by Likert scales. Maximum tolerated volume (MTV) was defined as the ingested volume when a score of 5 was reached for any symptom or when the test had to be stopped because the patients could not tolerate more volume. Sensitivity and specificity were analyzed. RESULTS: FD patients had higher symptom scores for both tests compared to controls (water: t= 4.1, P= 0.001 ＜0.01; Nutren(R): t= 5.2, P= 0.001＜0.01). The MTV forwater and Nutren(R) were significantly lower in FD (water: 1014±288 vs 1749±275 mL; t = 7.9, P = 0.001＜0.01;Nutren(R): 652±168 vs 1278±286 mL; t= 6.7, P = 0.001＜0.01). With the volume tolerated by the controls, the percentile 10 was determined as the lower limit fortolerance. Sensitivity and specificity were 0.90, 0.95 for water and 0.95, 0.95 for Nutren(R) tests.CONCLUSION: A drinking test with water or a nutritional beverage can discriminate between FD patients and healthy subjects in Mexico, with high sensitivity and specificity. These tests could be used as objective, noninvasive, and safe diagnostic approaches for FD patients.
基金The Project was supported by National Natural Science Foundation of china.
文摘This paper describes and explores a maximum-entropy approach to continuous minimax problem, which is applicable in many fields, such as transportation planning and game theory. It illustrates that the maximum entropy approcach has easy framework and proves that every accumulation of {x_k} generated by maximum-entropy programming is -optimal solution of initial continuous minimax problem. The paper also explains BFGS or TR method for it. Two numerical exam.ples for continuous minimax problem are
基金Supported by NSF of Zhejiang Province of China(LQ18A010002,LQ17A010002)。
文摘This paper focuses on the continuity of the truncated Hardy-Littlewood maximal function.We first show that the truncated Hardy-Littlewood maximal function is lower semi-continuous.Then by investigating the behavior of the truncated Hardy-Littlewood maximal function when the truncated parameterγchanges,we obtain an equivalent condition of the continuity of the truncated Hardy-Littlewood maximal function.
文摘Treatment of skeletal Cl II includes functional orthopedic treatment, head-gears, extraction of the upper premolars and orthognathic surgery. To treat any patient with functional appliances (bite jumping) an adequate overjet is necessary. In this case an 11 years old female patient has skeletal CLII due to mandibular deficiency with ANB angle 8 degrees, overbite: 3 mm, overjet: 1 mm, extremely convex profile and underdeveloped chin due to the hyper muscle contraction of the lower lip to obtain oral seal. To obtain an adequate overjet lower first premolars were extracted and maximum retraction using mini screws (for maximum anchorage) was applied. Afterwards Rahhal functional appliance was used by the patient 16 hours a day for 6 months and 10 hours a day for another 6 months for retention. After that fixed orthodontic treatment was completed. Lateral cephalometrics were taken, traced and analyzed. In the result Skeletal CLI was obtained (ANB 4 degree), straight facial profile, normal over bite overjet and particular chin development were noticed. As a conclusion, in skeletal CLII malocclusions, lower incisor protrusion will cause a contraindication for functional treatment. Extraction of the lower premolars and retraction of the lower incisors followed by functional orthopedic treatment is an efficient method to treat these cases instead of waiting for orthognathic surgery, also reducing the muscle pressure on the chin will change the development characteristics of it.
基金supported by Russian Science Foundation,RSF 23-75-00009(part of the study corresponding to finding 1)Part of the study corresponding to finding 2 was carried out within the state assignment,FSR No.:122020300045-5(03.02.2022).
文摘Objectives To compare respiratory parameters of peripheral blood mononuclear cell mitochondria and iron metabolism indicators in patients with different NYHA functional classes of ischemic heart failure(HF).Methods This single center, prospective, non-blinded study enrolled 20 patients with diagnosed chronic HF of ischemic genesis with reduced and mildly reduced left ventricle ejection fraction. The maximum oxygen consumption at the peak of the exercise test(VO2peak), iron metabolism parameters and respiratory activity of peripheral blood mononuclear cell mitochondria were assessed.Results Among the patients, a half of individuals were diagnosed with iron deficiency. Subgroups of patients with different HF severity did not significant differ in VO2peak(P=0.209), serum iron(P=0.468) and ferritin(P=0.235) levels. But there was a trend in increasing in these parameters with increasing NYHA HF functional class. Respiratory control coefficient(RC) in NADdependent and FAD-dependent mitochondrial oxidation were lower in patients with NYHA HF Ⅲ functional class compared to individuals with NYHA HF I functional class(P=0.028 and P=0.040, respectively). Serum iron(P=0.026), ferritin(P=0.045)levels, transferrin saturation(P=0.006) were negatively correlated with RC in NAD-dependent mitochondrial oxidation.Conclusions In aggravation of ischemic HF NYHA FC, there is a decrease in RC of PBMC mitochondria during the oxidation of NAD-dependent and FAD-dependent substrates. In the whole sample, patients with laboratory-confirmed iron deficiency accounted a half of the total number. Iron metabolism parameters had a paradoxical inverse relationship with the level of RC in PBMC mitochondria of patients with HF.
基金funded by Scientific Research Deanship at University of Ha’il-Saudi Arabia through project number(RG-24014).
文摘We present a computer-modeling framework for photovoltaic(PV)source emulation that preserves the exact single-diode physics while enabling iteration-free,real-time evaluation.We derive two closed-form explicit solvers based on the Lambert W function:a voltage-driven V-Lambert solver for high-fidelity I–V computation and a resistance-driven R-Lambert solver designed for seamless integration in a closed-loop PV emulator.Unlike Taylor-linearized explicit models,our proposed formulation retains the exponential nonlinearity of the PV equations.It employs a numerically stable analytical evaluation that eliminates the need for lookup tables and root-finding,all while maintaining limited computational costs and a small memory footprint.The R-Lambert model is integrated into a buck-converter emulator equipped with a discrete PI regulator,which generates current references directly from sensed operating points,thus supporting hardware-constrained implementation.Comprehensive numerical experiments conducted on six commercial modules from various technologies(mono,poly,and multicrystalline)demonstrate significant accuracy improvements under the IEC EN 50530 near-MPP criterion:the V-Lambert solver reduces the±10%Vmpp band error by up to 61 times compared to an explicit-model baseline.Dynamic simulations under varying irradiance,temperature,and load conditions achieve millisecond-scale settling with accurate trajectory tracking.Additionally,processor-in-the-loop experimental validation on an embedded microcontroller supports the simulation results.By unifying exact analytical modeling with embedded realization,this work advances computer modeling for PV emulation,MPPT benchmarking,and controller verification in integrated renewable energy systems.
基金ThisworkisfinanciallysupportedbythePh.D.FoundationoftheMinistryoftheEducationofChina (No .2 0 0 0 4 2 30 8)
文摘A new method for estimating the n (50 or 100) -year return-period waveheight, namely, the extreme waveheight expected to occur in n years, is presented on the basis of the maximum entropy principle. The main points of the method are as follows: (1) based on the Hamiltonian principle, a maximum entropy probability density function for the extreme waveheight H, f(H)=αHγ e -βH4 is derived from a Lagrangian function subject to some necessary and rational constraints; (2) the parameters α, β, and γ in the function are expressed in terms of the mean , variance V= (H-)2 and bias B= (H-)3 ; and (3) with , V and B estimated from observed data, the n -year return-period wave height H n is computed in accordance with the formula 11-F(H n)=n , where F(H n) is defined as F(H n)=∫ H n 0f(H) d H. Examples of estimating the 50 and 100-year return period waveheights by the present method and by some currently used method from observed data acquired from two hydrographic stations are given. A comparison of the estimated results shows that the present method is superior to the others.
文摘Based on the maximum entropy principle, a probability density function (PDF) is derived for the distribution of wave heights in a random wave field, without any more hypothesis. The present PDF, being a non-Rayleigh form, involves two parameters: the average wave height H— and the state parameter γ. The role of γ in the distribution of wave heights is examined. It is found that γ may be a certain measure of sea state. A least square method for determining γ from measured data is proposed. In virtue of the method, the values of γ are determined for three sea states from the data measured in the East China Sea. The present PDF is compared with the well known Rayleigh PDF of wave height and it is shown that it much better fits the data than the Rayleigh PDF. It is expected that the present PDF would fit some other wave variables, since its derivation is not restricted only to the wave height.
基金Supported by the National Natural Science Foundation of China（61273132）Doctoral Fund of Ministry of Education of China（20110010110010）
文摘The IMC(Internal Model Control) controller based on robust tuning can improve the robustness and dynamic performance of the system.In this paper,the robustness degree of the control system is investigated based on Maximum Sensitivity(Ms) in depth.And the analytical relationship is obtained between the robustness specification and controller parameters,which gives a clear design criterion to robust IMC controller.Moreover,a novel and simple IMC-PID(Proportional-Integral-Derivative) tuning method is proposed by converting the IMC controller to PID form in terms of the time domain rather than the frequency domain adopted in some conventional IMC-based methods.Hence,the presented IMC-PID gives a good performance with a specific robustness degree.The new IMC-PID method is compared with other classical IMC-PID rules,showing the flexibility and feasibility for a wide range of plants.
文摘Stroke patients with hemiplegia exhibit flexor spasms in the upper limb and extensor spasms in the lower limb, and their movement patterns vary greatly. Constraint-induced movement therapy is an upper limb rehabilitation technique used in stroke patients with hemiplegia; however, studies of lower extremity rehabilitation are scarce. In this study, stroke patients with lower limb hemiplegia underwent conventional Bobath therapy for 4 weeks as baseline treatment, followed by constraint-induced movement therapy for an additional 4 weeks. The 10-m maximum walking speed and Berg balance scale scores significantly improved following treatment, and lower extremity motor function also improved. The results of functional MRI showed that constraint-induced movement therapy alleviates the reduction in cerebral functional activation in patients, which indicates activation of functional brain regions and a significant increase in cerebral blood perfusJon. These results demonstrate that constraint-induced movement therapy promotes brain functional reorganization in stroke patients with lower limb hemiplegia.
