With the increasing integration of renewable energy,microgrids are increasingly facing stability challenges,primarily due to the lack of inherent inertia in inverter-dominated systems,which is traditionally provided b...With the increasing integration of renewable energy,microgrids are increasingly facing stability challenges,primarily due to the lack of inherent inertia in inverter-dominated systems,which is traditionally provided by synchronous generators.To address this critical issue,Virtual Synchronous Generator(VSG)technology has emerged as a highly promising solution by emulating the inertia and damping characteristics of conventional synchronous generators.To enhance the operational efficiency of virtual synchronous generators(VSGs),this study employs smallsignal modeling analysis,root locus methods,and synchronous generator power-angle characteristic analysis to comprehensively evaluate how virtual inertia and damping coefficients affect frequency stability and power output during transient processes.Based on these analyses,an adaptive control strategy is proposed:increasing the virtual inertia when the rotor angular velocity undergoes rapid changes,while strengthening the damping coefficient when the speed deviation exceeds a certain threshold to suppress angular velocity oscillations.To validate the effectiveness of the proposed method,a grid-connected VSG simulation platform was developed inMATLAB/Simulink.Comparative simulations demonstrate that the proposed adaptive control strategy outperforms conventional VSGmethods by significantly reducing grid frequency deviations and shortening active power response time during active power command changes and load disturbances.This approach enhances microgrid stability and dynamic performance,confirming its viability for renewable-dominant power systems.Future work should focus on experimental validation and real-world parameter optimization,while further exploring the strategy’s effectiveness in improvingVSG low-voltage ride-through(LVRT)capability and power-sharing applications in multi-parallel configurations.展开更多
Harvesting energy from humid air to generate electricity represents a promising strategy for sustainable power generation.However,achieving high output and long-term stability in moisture-driven power generators(MPGs)...Harvesting energy from humid air to generate electricity represents a promising strategy for sustainable power generation.However,achieving high output and long-term stability in moisture-driven power generators(MPGs)remains a significant challenge.Here,we develop an efficient MPG by incorporating polymerized ionic liquid(PIL)and MXene through in-situ polymerization of cationic long chains within the MXene layers.This structural design enhances the hydrophilicity and ion dynamics,ensuring stable and sustained electrical output.A single MPG device delivers an open-circuit voltage of 0.65 V and a power density of 14.87 mW·cm^(-2),operating continuously for over 36 h.Surface characterization and quantum chemistry calculations elucidate that the mobile anions within the MPG move directionally under moisture gradients,while polymerized cations remain stationary,driving power generation.The MPG exhibits exceptional long-term stability,retaining about 80%of its initial voltage output after 30 days.Moreover,these MPGs demonstrate scalability for practical applications,capable of efficiently charging capacitors and powering LEDs through simple series-parallel configurations.This work offers a promising strategy to simultaneously enhance the performance and operational stability of MPGs,offering a sustainable solution for the direct conversion of low-grade thermal energy from moisture into clean electricity.展开更多
A new 300 MVA/1350 MJ motor generator （MG） will be built to feed all of the poloidal field power supplies （PFPS） and auxiliary heating power supplies of the HL-2M tokamak. The MG has a vertical-shaft salient pole ...A new 300 MVA/1350 MJ motor generator （MG） will be built to feed all of the poloidal field power supplies （PFPS） and auxiliary heating power supplies of the HL-2M tokamak. The MG has a vertical-shaft salient pole 6-phase synchronous generator and a coaxial 8500 kW induction motor. The Ohmic heating power supply （OHPS） consisting of 4-quadrant DC pulsed convertor is the one with the highest parameters among the PFPS. Therefore, the match between the generator and the OHPS is very important. The matching study with Matlab/Simulink is described in this paper. The simulation results show that the subtransient reactance of the generator is closely related to the inversion operation of the OHPS. By setting various subtransient reactance in the simulation generator model and considering the cost reduction, the optimized parameters are obtained as xd＂ = 0.405 p.u. at 100 Hz for the generator. The models built in the simulation can be used as an important tool for studying the dynamic characteristics and the control strategy of other HL-2M PFPSes.展开更多
In this paper, a design method for ocean wave permanent magnet synchronous generator(PMSG)is proposed with new performance criteria to obtain better output performance at the cost of less permanent magnet material. Be...In this paper, a design method for ocean wave permanent magnet synchronous generator(PMSG)is proposed with new performance criteria to obtain better output performance at the cost of less permanent magnet material. Besides, a simple equivalent analytical geometry method is put forward to calculate the sizes of permanent magnets. Based on geometric and electromagnetic models, four types of rotor structures are compared, i.e., embedded, tangential, tile surface mount and convex surface mount structures. The designs and comparisons of machine are performed with the same permanent magnet volume. Moreover, the influences of mechanical pole-arc coefficient of tile surface mount PMSG on electrical efficiency, output power, material corrosion, core loss, and torque ripple are investigated. Finite-element analysis method is applied to verify the results using Ansoft/Maxwell.展开更多
The present study was carried out in order to track the maximum power point in a variable speed turbine by minimizing electromechanical torque changes using a sliding mode control strategy. In this strategy, first, th...The present study was carried out in order to track the maximum power point in a variable speed turbine by minimizing electromechanical torque changes using a sliding mode control strategy. In this strategy, first, the rotor speed is set at an optimal point for different wind speeds. As a result of which, the tip speed ratio reaches an optimal point, mechanical power coefficient is maximized, and wind turbine produces its maximum power and mechanical torque. Then, the maximum mechanical torque is tracked using electromechanical torque. In this technique, tracking error integral of maximum mechanical torque, the error, and the derivative of error are used as state variables. During changes in wind speed, sliding mode control is designed to absorb the maximum energy from the wind and minimize the response time of maximum power point tracking(MPPT). In this method, the actual control input signal is formed from a second order integral operation of the original sliding mode control input signal. The result of the second order integral in this model includes control signal integrity, full chattering attenuation, and prevention from large fluctuations in the power generator output. The simulation results, calculated by using MATLAB/m-file software, have shown the effectiveness of the proposed control strategy for wind energy systems based on the permanent magnet synchronous generator(PMSG).展开更多
Torsional vibration of a circular piezoelectric shell of polarized ceramics mounted on a rotationally vibrating base is analyzed. The shell is properly electroded and connected to a circuit such that an electric outpu...Torsional vibration of a circular piezoelectric shell of polarized ceramics mounted on a rotationally vibrating base is analyzed. The shell is properly electroded and connected to a circuit such that an electric output is generated. The structure analyzed represents a piezoelectric generator for converting mechanical energy from angular vibrations to electrical energy. Analytical expressions and numerical results for the output voltage, current, power, efficiency and power density are given.展开更多
The wind energy generation,utilization and its grid penetration in electrical grid are increasing world-wide.The wind generated power is always fluctuating due to its time varying nature and causing stability problem....The wind energy generation,utilization and its grid penetration in electrical grid are increasing world-wide.The wind generated power is always fluctuating due to its time varying nature and causing stability problem.This weak interconnection of wind generating source in the electrical network affects the power quality and reliability.The localized energy storages shall compensate the fluctuating power and support to strengthen the wind generator in the power system.In this paper,it is proposed to control the voltage source inverter （VSI） in current control mode with energy storage,that is,batteries across the dc bus.The generated wind power can be extracted under varying wind speed and stored in the batteries.This energy storage maintains the stiff voltage across the dc bus of the voltage source inverter.The proposed scheme enhances the stability and reliability of the power system and maintains unity power factor.It can also be operated in stand-alone mode in the power system.The power exchange across the wind generation and the load under dynamic situation is feasible while maintaining the power quality norms at the common point of coupling.It strengthens the weak grid in the power system.This control strategy is evaluated on the test system under dynamic condition by using simulation.The results are verified by comparing the performance of controllers.展开更多
The water level control system of steam generator in a pressurized water reactor of nuchear power plant plays an important role which effects the water level control of the steam generator are due the reverse dynamics...The water level control system of steam generator in a pressurized water reactor of nuchear power plant plays an important role which effects the water level control of the steam generator are due the reverse dynamics behavior,so the transient analysis of the steam generator should firstly solve their mathematical models.For determination of dynamic behavior and design and testing of the control system, a nonlinear math model is developed using one dimensional conservation equations of mass,momentum and energy of primary and secondary sides of the steam generator. The nonlinear model is verified with standard power plant data available in the references, then the steady states and transient calculations are performed for full power to 5% power reactor operation of the steam generator of Chinese Qinshan Nuclear Power Plant.展开更多
According to the increasing requirement of the wind energy utilization and the dynamic stability in the variable speed variable pitch wind power generation system, a linear parameter varying （LPV） system model is es...According to the increasing requirement of the wind energy utilization and the dynamic stability in the variable speed variable pitch wind power generation system, a linear parameter varying （LPV） system model is established and a new adaptive robust guaranteed cost controller （AGCC） is proposed in this paper. First, the uncertain parameters of the system are estimated by using the adaptive method, then the estimated uncertain parameters and robust guaranteed cost control method are used to design a state feedback controller. The controller s feedback gain is obtained by solving a set of linear matrix inequality （LMI） constraints, such that the controller can meet a quadratic performance evaluation criterion. The simulation results show that we can realize the goal of maximum wind energy capture in low wind speed by the optimal torque control and constant power control in high wind speed by variable pitch control with good dynamic characteristics, robustness and the ability of suppressing disturbance.展开更多
The supercritical CO_(2)(sCO_(2))power cycle could improve efficiencies for a wide range of thermal power plants.The sCO_(2)turbine generator plays an important role in the sCO_(2)power cycle by directly converting th...The supercritical CO_(2)(sCO_(2))power cycle could improve efficiencies for a wide range of thermal power plants.The sCO_(2)turbine generator plays an important role in the sCO_(2)power cycle by directly converting thermal energy into mechanical work and electric power.The operation of the generator encounters challenges,including high temperature,high pressure,high rotational speed,and other engineering problems,such as leakage.Experimental studies of sCO_(2)turbines are insufficient because of the significant difficulties in turbine manufacturing and system construction.Unlike most experimental investigations that primarily focus on 100 kW‐or MW‐scale power generation systems,we consider,for the first time,a small‐scale power generator using sCO_(2).A partial admission axial turbine was designed and manufactured with a rated rotational speed of 40,000 rpm,and a CO_(2)transcritical power cycle test loop was constructed to validate the performance of our manufactured generator.A resistant gas was proposed in the constructed turbine expander to solve the leakage issue.Both dynamic and steady performances were investigated.The results indicated that a peak electric power of 11.55 kW was achieved at 29,369 rpm.The maximum total efficiency of the turbo‐generator was 58.98%,which was affected by both the turbine rotational speed and pressure ratio,according to the proposed performance map.展开更多
This paper presents a novel method to solve old problem of water level control system of pressurized water reactor (PWR) steam generator (SG) of nuclear power plant (NPP) .The level control system of SG plays an impo...This paper presents a novel method to solve old problem of water level control system of pressurized water reactor (PWR) steam generator (SG) of nuclear power plant (NPP) .The level control system of SG plays an important role which effects the reliablity,safty,cost of SG and its mathematical models have been solved.A model of the conventional controller is presented and the existing problems are discussed. A novel rule based realtime control technique is designed with a computerized water level control (CWLC) system for SG of PWR NPP.The performance of this is evaluated for full power reactor operating conditions by applying different transient conditions of SG′s data of Qinshan Nuclear Power Plant (QNPP).展开更多
A magnetohydrodynamic （MHD） power generator system involves several subjects such as magnetohydrodynamics, plasma physics, material science, and structure mechanics. Therefore, the performance of the MHD power gener...A magnetohydrodynamic （MHD） power generator system involves several subjects such as magnetohydrodynamics, plasma physics, material science, and structure mechanics. Therefore, the performance of the MHD power generator is affected by many factors, among which the load coefficient k is of great importance. This paper reveals the effect of some system parameters on the performance by three-dimensional （3D） numerical simulation for a Faraday type MHD power generator using He/Xe as working plasma. The results show that average electrical conductivity increases first and then decreases with the addition of magnetic field intensity. Electrical conductivity reaches the maximum value of 11.05 S/m, while the applied magnetic field strength is B = 1.75 T. When B 〉 3 T, the ionization rate along the midline well keeps stable, which indicates that the ionization rate and three-body recombination rate （three kinds of particles combining to two kinds of particles） are approximately equal, and the relatively stable plasma structure of the mainstream is preserved. Efficiency of power generation of the Faraday type channel increases with an increment of the load factor. However, enthalpy extraction first increases to a certain value, and then decreases with the load factor. The enthalpy extraction rate reaches the maximum when the load coefficient k equals 0.625, which is the best performance of the power generator channel with the maximum electricity production.展开更多
Lower temperature waste heats less than 373 K have strong potentials to supply additional energies because of their enormous quantities and ubiquity. Accordingly, reinforcement of power generations harvesting low temp...Lower temperature waste heats less than 373 K have strong potentials to supply additional energies because of their enormous quantities and ubiquity. Accordingly, reinforcement of power generations harvesting low temperature heats is one of the urgent tasks for the current generation in order to accomplish energy sustainability in the coming decades. In this study, a liquid turbine power generator driven by lower temperature heats below 373 K was proposed in the aim of expanding selectable options for harvesting low temperature waste heats less than 373 K. The proposing system was so simply that it was mainly composed of a liquid turbine, a liquid container with a biphasic medium of water and an underlying water-insoluble low-boiling-point medium in a liquid phase, a heating section for vaporization of the liquid and a cooling section for entropy discharge outside the system. Assumed power generating steps via the proposing liquid turbine power generator were as follows: step 1: the underlying low-boiling-point medium in a liquid phase was vaporized, step 2: the surfacing vapor bubbles of low-boiling-point medium accompanied the biphasic medium in their wakes, step 3: such high momentum flux by step 2 rotated the liquid turbine (i.e. power generation), step 4: the surfacing low-boiling-point medium vapor was gradually condensed into droplets, step 5: the low-boiling-point medium droplets were submerged to the underlying medium in a liquid phase. Experiments with a prototype liquid turbine power generator proved power generations in accordance with the assumed steps at a little higher than ordinary temperature. Increasing output voltage could be obtained with an increase in the cooling temperature among tested ranging from 294 to 296 K in contrast to normal thermal engines. Further improvements of the direct current voltage from the proposing liquid turbine power generator can be expected by means of far more vigorous multiphase flow induced by adding solid powders and theoretical optimizations of heat and mass transfers.展开更多
Probabilistic load flow(PLF)algorithm has been regained attention,because the large-scale wind power integration into the grid has increased the uncertainty of the stable and safe operation of the power system.The PLF...Probabilistic load flow(PLF)algorithm has been regained attention,because the large-scale wind power integration into the grid has increased the uncertainty of the stable and safe operation of the power system.The PLF algorithm is improved with introducing the power performance of double-fed induction generators(DFIGs)for wind turbines(WTs)under the constant power factor control and the constant voltage control in this paper.Firstly,the conventional Jacobian matrix of the alternating current(AC)load flow model is modified,and the probability distributions of the active and reactive powers of the DFIGs are derived by combining the power performance of the DFIGs and the Weibull distribution of wind speed.Then,the cumulants of the state variables in power grid are obtained by improved PLF model and more accurate power probability distributions.In order to generate the probability density function(PDF)of the nodal voltage,Gram-Charlier,Edgeworth and Cornish-Fisher expansions based on the cumulants are applied.Finally,the effectiveness and accuracy of the improved PLF algorithm is demonstrated in the IEEE 14-RTS system with wind power integration,compared with the results of Monte Carlo(MC)simulation using deterministic load flow calculation.展开更多
With the development of science and technology,the social demand for energy is also increasing.However,the traditional method of energy supply primarily relies on non-renewable resources for energy conversion.While th...With the development of science and technology,the social demand for energy is also increasing.However,the traditional method of energy supply primarily relies on non-renewable resources for energy conversion.While this conventional approach can expedite the energy conversion process,it also results in irreversible ecological hazards.To solve the above problems,the use of renewable clean energy is proposed.In this paper,a droplet generator is proposed to integrate the rotating structure with the body effect power generation for the tiny energy of raindrops.This droplet generator can increase the speed of droplets leaving the dielectric layer and reduce the effect of continuously falling droplets on the droplet-based electricity generator(DEG).It is demonstrated that the instantaneous power of the generator can reach 0.9 mW,which can be a good solution to the power supply needs of some small power supply equipment,and thereafter is beneficial to the self-powering of the equipment in rainy days.展开更多
The development of hydrogen redox electric power generators for infinite cruising range electric vehicles represents a true technological breakthrough. Such systems consist of a polymer electrolyte membrane hydrogen e...The development of hydrogen redox electric power generators for infinite cruising range electric vehicles represents a true technological breakthrough. Such systems consist of a polymer electrolyte membrane hydrogen electrolytic cell equipped with an electrostatic-induction potential-superposed water electrolytic cell that provides a stoichiometric H2-O2 fuel mixture during operation of the vehicle. This generator functions with zero power input, zero matter input and zero emission due to the so-called ＂zero power input＂ electrostatic-to-chemical energy conversion occurring in the electrolytic cell. Here, theoretical simulations were performed to verify the target performance of such generators, assuming a pair of FC （fuel cell） and electrolytic cell stacks, both of which are commercially available.展开更多
Solar forecasting using ground-based sky image offers a promising approach to reduce uncertainty in photovoltaic(PV)power generation.However,existing methods often rely on deterministic predictions that lack diversity...Solar forecasting using ground-based sky image offers a promising approach to reduce uncertainty in photovoltaic(PV)power generation.However,existing methods often rely on deterministic predictions that lack diversity,making it difficult to capture the inherently stochastic nature of cloud movement.To address this limitation,we propose a new two-stage probabilistic forecasting framework.In the first stage,we introduce I-GPT,a multiscale physics-constrained generative model for stochastic sky image prediction.Given a sequence of past sky images,I-GPT uses a Transformer-based VQ-VAE.It also incorporates multi-scale physics-informed recurrent units(Multi-scale PhyCell)and dynamically weighted fuses physical and appearance features.This approach enables the generation of multiple plausible future sky images with realistic and coherent cloud motion.In the second stage,these predicted sky images are fed into an Image-to-Power U-Net(IP-U-Net)to produce 15-min-ahead probabilistic PV power forecasts.In experiments using our dataset,the proposed approach significantly outperforms deterministic,other stochastic,multimodal,and smart persistence baselines models,achieving a superior reliability–sharpness trade-off.It attains a Continuous Ranked Probability Score(CRPS)of 2.912 kW and a Winkler Score(WS)of 33.103 kW on the test set and CRPS of 2.073 kW and WS of 22.202 kW on the validation set.Translating to 35.9%and 42.78%improvement in predictive skill over the smart persistence model.Notably,our method excels during rapidly changing cloud-cover conditions.By enhancing both the accuracy and robustness of short-term PV forecasting,the framework provides tangible benefits for Virtual Power Plant(VPP)operation,supporting more reliable scheduling,grid stability,and risk-aware energy management.展开更多
With the increase in the use of electronic devices in many different environments,a need has arisen for an easily implemented method for the rapid,sensitive detection of liquids in the vicinity of electronic component...With the increase in the use of electronic devices in many different environments,a need has arisen for an easily implemented method for the rapid,sensitive detection of liquids in the vicinity of electronic components.In this work,a high-performance power generator that combines carbon nanoparticles and TiO2 nanowires has been fabricated by sequential electrophoretic deposition(EPD).The opencircuit voltage and short-circuit current of a single generator are found to exceed 0.7 V and 100μA when 6μL of water was applied.The generator is also found to have a stable and reproducible response to other liquids.An output voltage of 0.3 V was obtained after 244,876,931,and 184μs,on exposure of the generator to 6μL of water,ethanol,acetone,and methanol,respectively.The fast response time and high sensitivity to liquids show that the device has great potential for the detection of small quantities of liquid.In addition,the simple easily implemented sequential EPD method ensures the high mechanical strength of the device.This compact,reliable device provides a new method for the sensitive,rapid detection of extraneous liquids before they can impact the performance of electronic circuits,particularly those on printed circuit board.展开更多
An all solid-state pulsed power generator for plasma immersion ion implantation （PIII） is described. The pulsed power system is based on a Marx circuit configuration and semi- conductor switches, which have many adv...An all solid-state pulsed power generator for plasma immersion ion implantation （PIII） is described. The pulsed power system is based on a Marx circuit configuration and semi- conductor switches, which have many advantages in adjustable repetition frequency, pulse width modulation and long serving life compared with the conventional circuit category, tube-based technologies such as gridded vacuum tubes, thyratrons, pulse forming networks and transformers. The operation of PIII with pulse repetition frequencies up to 500 Hz has been achieved at a pulse voltage amplitude from 2 kV to 60 kV, with an adjustable pulse duration from 1 μs to 100 μs. The proposed system and its performance, as used to drive a plasma ion implantation chamber, are described in detail on the basis of the experimental results.展开更多
In this paper, we report a rapid synthesis of piezoelectric ZnO-nanostructures and fabrication of the nanostructures- based power-generators demonstrating an energy conversion from an environmental mechanical/ultrason...In this paper, we report a rapid synthesis of piezoelectric ZnO-nanostructures and fabrication of the nanostructures- based power-generators demonstrating an energy conversion from an environmental mechanical/ultrasonic energy to an electrical energy. The ZnO nanostructures are grown on a silicon wafer by a modified chemical solution method （CSD, chemical-solution-deposition） with a two-step thermal-oxidation approach. The synthesis process can be completed within 1 h. By varying the mixture-ratio of Zn micro-particles in an oxalic acid solution with 0.75 mol/l concentration in the CSD process, the growth mechanism is well-controlled to synthesize three different types of ZnO-nanostructures （i.e., dandelion-like nanostructures, columnar nanostructures, and nanowires）. Furthermore, through oxidizing at different temperatures in the thermal-oxidation process, the featured geometry of the nanostructures （e.g., the length and diameter of a nanowire） is modified. The geometry, size, morphology, crystallization, and material phase of the modified nanostructures are characterized by scanning electron microscopy and X-ray diffraction. Finally, the nanostructures are used to fabricate several micro power-generators. Through the piezoelectric effect, a maximum current density output of 0.28 μA cm-2 generated by a power-generator under an ultrasonic wave is observed.展开更多
基金financially supported by the Talent Initiation Fund of Wuxi University(550220008).
文摘With the increasing integration of renewable energy,microgrids are increasingly facing stability challenges,primarily due to the lack of inherent inertia in inverter-dominated systems,which is traditionally provided by synchronous generators.To address this critical issue,Virtual Synchronous Generator(VSG)technology has emerged as a highly promising solution by emulating the inertia and damping characteristics of conventional synchronous generators.To enhance the operational efficiency of virtual synchronous generators(VSGs),this study employs smallsignal modeling analysis,root locus methods,and synchronous generator power-angle characteristic analysis to comprehensively evaluate how virtual inertia and damping coefficients affect frequency stability and power output during transient processes.Based on these analyses,an adaptive control strategy is proposed:increasing the virtual inertia when the rotor angular velocity undergoes rapid changes,while strengthening the damping coefficient when the speed deviation exceeds a certain threshold to suppress angular velocity oscillations.To validate the effectiveness of the proposed method,a grid-connected VSG simulation platform was developed inMATLAB/Simulink.Comparative simulations demonstrate that the proposed adaptive control strategy outperforms conventional VSGmethods by significantly reducing grid frequency deviations and shortening active power response time during active power command changes and load disturbances.This approach enhances microgrid stability and dynamic performance,confirming its viability for renewable-dominant power systems.Future work should focus on experimental validation and real-world parameter optimization,while further exploring the strategy’s effectiveness in improvingVSG low-voltage ride-through(LVRT)capability and power-sharing applications in multi-parallel configurations.
基金the National Natural Science Foundation of China(22278401 and 92163209)the ANSO Collaborative Research Program(ANSO-CR-KP-2022-12)+2 种基金Beijing Natural Science Foundation(2252011 and JQ22004)Beijing Nova Program(20230484478)for financial supportsupported by Public Computing Cloud,Renmin University of China.
文摘Harvesting energy from humid air to generate electricity represents a promising strategy for sustainable power generation.However,achieving high output and long-term stability in moisture-driven power generators(MPGs)remains a significant challenge.Here,we develop an efficient MPG by incorporating polymerized ionic liquid(PIL)and MXene through in-situ polymerization of cationic long chains within the MXene layers.This structural design enhances the hydrophilicity and ion dynamics,ensuring stable and sustained electrical output.A single MPG device delivers an open-circuit voltage of 0.65 V and a power density of 14.87 mW·cm^(-2),operating continuously for over 36 h.Surface characterization and quantum chemistry calculations elucidate that the mobile anions within the MPG move directionally under moisture gradients,while polymerized cations remain stationary,driving power generation.The MPG exhibits exceptional long-term stability,retaining about 80%of its initial voltage output after 30 days.Moreover,these MPGs demonstrate scalability for practical applications,capable of efficiently charging capacitors and powering LEDs through simple series-parallel configurations.This work offers a promising strategy to simultaneously enhance the performance and operational stability of MPGs,offering a sustainable solution for the direct conversion of low-grade thermal energy from moisture into clean electricity.
文摘A new 300 MVA/1350 MJ motor generator （MG） will be built to feed all of the poloidal field power supplies （PFPS） and auxiliary heating power supplies of the HL-2M tokamak. The MG has a vertical-shaft salient pole 6-phase synchronous generator and a coaxial 8500 kW induction motor. The Ohmic heating power supply （OHPS） consisting of 4-quadrant DC pulsed convertor is the one with the highest parameters among the PFPS. Therefore, the match between the generator and the OHPS is very important. The matching study with Matlab/Simulink is described in this paper. The simulation results show that the subtransient reactance of the generator is closely related to the inversion operation of the OHPS. By setting various subtransient reactance in the simulation generator model and considering the cost reduction, the optimized parameters are obtained as xd＂ = 0.405 p.u. at 100 Hz for the generator. The models built in the simulation can be used as an important tool for studying the dynamic characteristics and the control strategy of other HL-2M PFPSes.
基金Supported by the National Natural Science Foundation of China(No.51577124)Tianjin Research Program of Application Foundation and Advanced Technology(No.15JCZDJC32100)
文摘In this paper, a design method for ocean wave permanent magnet synchronous generator(PMSG)is proposed with new performance criteria to obtain better output performance at the cost of less permanent magnet material. Besides, a simple equivalent analytical geometry method is put forward to calculate the sizes of permanent magnets. Based on geometric and electromagnetic models, four types of rotor structures are compared, i.e., embedded, tangential, tile surface mount and convex surface mount structures. The designs and comparisons of machine are performed with the same permanent magnet volume. Moreover, the influences of mechanical pole-arc coefficient of tile surface mount PMSG on electrical efficiency, output power, material corrosion, core loss, and torque ripple are investigated. Finite-element analysis method is applied to verify the results using Ansoft/Maxwell.
文摘The present study was carried out in order to track the maximum power point in a variable speed turbine by minimizing electromechanical torque changes using a sliding mode control strategy. In this strategy, first, the rotor speed is set at an optimal point for different wind speeds. As a result of which, the tip speed ratio reaches an optimal point, mechanical power coefficient is maximized, and wind turbine produces its maximum power and mechanical torque. Then, the maximum mechanical torque is tracked using electromechanical torque. In this technique, tracking error integral of maximum mechanical torque, the error, and the derivative of error are used as state variables. During changes in wind speed, sliding mode control is designed to absorb the maximum energy from the wind and minimize the response time of maximum power point tracking(MPPT). In this method, the actual control input signal is formed from a second order integral operation of the original sliding mode control input signal. The result of the second order integral in this model includes control signal integrity, full chattering attenuation, and prevention from large fluctuations in the power generator output. The simulation results, calculated by using MATLAB/m-file software, have shown the effectiveness of the proposed control strategy for wind energy systems based on the permanent magnet synchronous generator(PMSG).
文摘Torsional vibration of a circular piezoelectric shell of polarized ceramics mounted on a rotationally vibrating base is analyzed. The shell is properly electroded and connected to a circuit such that an electric output is generated. The structure analyzed represents a piezoelectric generator for converting mechanical energy from angular vibrations to electrical energy. Analytical expressions and numerical results for the output voltage, current, power, efficiency and power density are given.
文摘The wind energy generation,utilization and its grid penetration in electrical grid are increasing world-wide.The wind generated power is always fluctuating due to its time varying nature and causing stability problem.This weak interconnection of wind generating source in the electrical network affects the power quality and reliability.The localized energy storages shall compensate the fluctuating power and support to strengthen the wind generator in the power system.In this paper,it is proposed to control the voltage source inverter （VSI） in current control mode with energy storage,that is,batteries across the dc bus.The generated wind power can be extracted under varying wind speed and stored in the batteries.This energy storage maintains the stiff voltage across the dc bus of the voltage source inverter.The proposed scheme enhances the stability and reliability of the power system and maintains unity power factor.It can also be operated in stand-alone mode in the power system.The power exchange across the wind generation and the load under dynamic situation is feasible while maintaining the power quality norms at the common point of coupling.It strengthens the weak grid in the power system.This control strategy is evaluated on the test system under dynamic condition by using simulation.The results are verified by comparing the performance of controllers.
文摘The water level control system of steam generator in a pressurized water reactor of nuchear power plant plays an important role which effects the water level control of the steam generator are due the reverse dynamics behavior,so the transient analysis of the steam generator should firstly solve their mathematical models.For determination of dynamic behavior and design and testing of the control system, a nonlinear math model is developed using one dimensional conservation equations of mass,momentum and energy of primary and secondary sides of the steam generator. The nonlinear model is verified with standard power plant data available in the references, then the steady states and transient calculations are performed for full power to 5% power reactor operation of the steam generator of Chinese Qinshan Nuclear Power Plant.
基金supported by Natural Science Foundation of Hebei Province(No. F2012203088)
文摘According to the increasing requirement of the wind energy utilization and the dynamic stability in the variable speed variable pitch wind power generation system, a linear parameter varying （LPV） system model is established and a new adaptive robust guaranteed cost controller （AGCC） is proposed in this paper. First, the uncertain parameters of the system are estimated by using the adaptive method, then the estimated uncertain parameters and robust guaranteed cost control method are used to design a state feedback controller. The controller s feedback gain is obtained by solving a set of linear matrix inequality （LMI） constraints, such that the controller can meet a quadratic performance evaluation criterion. The simulation results show that we can realize the goal of maximum wind energy capture in low wind speed by the optimal torque control and constant power control in high wind speed by variable pitch control with good dynamic characteristics, robustness and the ability of suppressing disturbance.
基金National Science Fund for Excellent Young Scholars,Grant/Award Number:52022066。
文摘The supercritical CO_(2)(sCO_(2))power cycle could improve efficiencies for a wide range of thermal power plants.The sCO_(2)turbine generator plays an important role in the sCO_(2)power cycle by directly converting thermal energy into mechanical work and electric power.The operation of the generator encounters challenges,including high temperature,high pressure,high rotational speed,and other engineering problems,such as leakage.Experimental studies of sCO_(2)turbines are insufficient because of the significant difficulties in turbine manufacturing and system construction.Unlike most experimental investigations that primarily focus on 100 kW‐or MW‐scale power generation systems,we consider,for the first time,a small‐scale power generator using sCO_(2).A partial admission axial turbine was designed and manufactured with a rated rotational speed of 40,000 rpm,and a CO_(2)transcritical power cycle test loop was constructed to validate the performance of our manufactured generator.A resistant gas was proposed in the constructed turbine expander to solve the leakage issue.Both dynamic and steady performances were investigated.The results indicated that a peak electric power of 11.55 kW was achieved at 29,369 rpm.The maximum total efficiency of the turbo‐generator was 58.98%,which was affected by both the turbine rotational speed and pressure ratio,according to the proposed performance map.
文摘This paper presents a novel method to solve old problem of water level control system of pressurized water reactor (PWR) steam generator (SG) of nuclear power plant (NPP) .The level control system of SG plays an important role which effects the reliablity,safty,cost of SG and its mathematical models have been solved.A model of the conventional controller is presented and the existing problems are discussed. A novel rule based realtime control technique is designed with a computerized water level control (CWLC) system for SG of PWR NPP.The performance of this is evaluated for full power reactor operating conditions by applying different transient conditions of SG′s data of Qinshan Nuclear Power Plant (QNPP).
基金Project supported by the National Defense Basic Scientific Research Program of China(No.JCKY2013203B003)
文摘A magnetohydrodynamic （MHD） power generator system involves several subjects such as magnetohydrodynamics, plasma physics, material science, and structure mechanics. Therefore, the performance of the MHD power generator is affected by many factors, among which the load coefficient k is of great importance. This paper reveals the effect of some system parameters on the performance by three-dimensional （3D） numerical simulation for a Faraday type MHD power generator using He/Xe as working plasma. The results show that average electrical conductivity increases first and then decreases with the addition of magnetic field intensity. Electrical conductivity reaches the maximum value of 11.05 S/m, while the applied magnetic field strength is B = 1.75 T. When B 〉 3 T, the ionization rate along the midline well keeps stable, which indicates that the ionization rate and three-body recombination rate （three kinds of particles combining to two kinds of particles） are approximately equal, and the relatively stable plasma structure of the mainstream is preserved. Efficiency of power generation of the Faraday type channel increases with an increment of the load factor. However, enthalpy extraction first increases to a certain value, and then decreases with the load factor. The enthalpy extraction rate reaches the maximum when the load coefficient k equals 0.625, which is the best performance of the power generator channel with the maximum electricity production.
文摘Lower temperature waste heats less than 373 K have strong potentials to supply additional energies because of their enormous quantities and ubiquity. Accordingly, reinforcement of power generations harvesting low temperature heats is one of the urgent tasks for the current generation in order to accomplish energy sustainability in the coming decades. In this study, a liquid turbine power generator driven by lower temperature heats below 373 K was proposed in the aim of expanding selectable options for harvesting low temperature waste heats less than 373 K. The proposing system was so simply that it was mainly composed of a liquid turbine, a liquid container with a biphasic medium of water and an underlying water-insoluble low-boiling-point medium in a liquid phase, a heating section for vaporization of the liquid and a cooling section for entropy discharge outside the system. Assumed power generating steps via the proposing liquid turbine power generator were as follows: step 1: the underlying low-boiling-point medium in a liquid phase was vaporized, step 2: the surfacing vapor bubbles of low-boiling-point medium accompanied the biphasic medium in their wakes, step 3: such high momentum flux by step 2 rotated the liquid turbine (i.e. power generation), step 4: the surfacing low-boiling-point medium vapor was gradually condensed into droplets, step 5: the low-boiling-point medium droplets were submerged to the underlying medium in a liquid phase. Experiments with a prototype liquid turbine power generator proved power generations in accordance with the assumed steps at a little higher than ordinary temperature. Increasing output voltage could be obtained with an increase in the cooling temperature among tested ranging from 294 to 296 K in contrast to normal thermal engines. Further improvements of the direct current voltage from the proposing liquid turbine power generator can be expected by means of far more vigorous multiphase flow induced by adding solid powders and theoretical optimizations of heat and mass transfers.
文摘Probabilistic load flow(PLF)algorithm has been regained attention,because the large-scale wind power integration into the grid has increased the uncertainty of the stable and safe operation of the power system.The PLF algorithm is improved with introducing the power performance of double-fed induction generators(DFIGs)for wind turbines(WTs)under the constant power factor control and the constant voltage control in this paper.Firstly,the conventional Jacobian matrix of the alternating current(AC)load flow model is modified,and the probability distributions of the active and reactive powers of the DFIGs are derived by combining the power performance of the DFIGs and the Weibull distribution of wind speed.Then,the cumulants of the state variables in power grid are obtained by improved PLF model and more accurate power probability distributions.In order to generate the probability density function(PDF)of the nodal voltage,Gram-Charlier,Edgeworth and Cornish-Fisher expansions based on the cumulants are applied.Finally,the effectiveness and accuracy of the improved PLF algorithm is demonstrated in the IEEE 14-RTS system with wind power integration,compared with the results of Monte Carlo(MC)simulation using deterministic load flow calculation.
文摘With the development of science and technology,the social demand for energy is also increasing.However,the traditional method of energy supply primarily relies on non-renewable resources for energy conversion.While this conventional approach can expedite the energy conversion process,it also results in irreversible ecological hazards.To solve the above problems,the use of renewable clean energy is proposed.In this paper,a droplet generator is proposed to integrate the rotating structure with the body effect power generation for the tiny energy of raindrops.This droplet generator can increase the speed of droplets leaving the dielectric layer and reduce the effect of continuously falling droplets on the droplet-based electricity generator(DEG).It is demonstrated that the instantaneous power of the generator can reach 0.9 mW,which can be a good solution to the power supply needs of some small power supply equipment,and thereafter is beneficial to the self-powering of the equipment in rainy days.
文摘The development of hydrogen redox electric power generators for infinite cruising range electric vehicles represents a true technological breakthrough. Such systems consist of a polymer electrolyte membrane hydrogen electrolytic cell equipped with an electrostatic-induction potential-superposed water electrolytic cell that provides a stoichiometric H2-O2 fuel mixture during operation of the vehicle. This generator functions with zero power input, zero matter input and zero emission due to the so-called ＂zero power input＂ electrostatic-to-chemical energy conversion occurring in the electrolytic cell. Here, theoretical simulations were performed to verify the target performance of such generators, assuming a pair of FC （fuel cell） and electrolytic cell stacks, both of which are commercially available.
基金supported by the“Regional Innovation Strategy(RIS)”through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(MOE)(2021RIS002)the Technology Development Program(RS-2025-02312851)funded by the Ministry of SMEs and Startups(MSS,Republic of Korea).
文摘Solar forecasting using ground-based sky image offers a promising approach to reduce uncertainty in photovoltaic(PV)power generation.However,existing methods often rely on deterministic predictions that lack diversity,making it difficult to capture the inherently stochastic nature of cloud movement.To address this limitation,we propose a new two-stage probabilistic forecasting framework.In the first stage,we introduce I-GPT,a multiscale physics-constrained generative model for stochastic sky image prediction.Given a sequence of past sky images,I-GPT uses a Transformer-based VQ-VAE.It also incorporates multi-scale physics-informed recurrent units(Multi-scale PhyCell)and dynamically weighted fuses physical and appearance features.This approach enables the generation of multiple plausible future sky images with realistic and coherent cloud motion.In the second stage,these predicted sky images are fed into an Image-to-Power U-Net(IP-U-Net)to produce 15-min-ahead probabilistic PV power forecasts.In experiments using our dataset,the proposed approach significantly outperforms deterministic,other stochastic,multimodal,and smart persistence baselines models,achieving a superior reliability–sharpness trade-off.It attains a Continuous Ranked Probability Score(CRPS)of 2.912 kW and a Winkler Score(WS)of 33.103 kW on the test set and CRPS of 2.073 kW and WS of 22.202 kW on the validation set.Translating to 35.9%and 42.78%improvement in predictive skill over the smart persistence model.Notably,our method excels during rapidly changing cloud-cover conditions.By enhancing both the accuracy and robustness of short-term PV forecasting,the framework provides tangible benefits for Virtual Power Plant(VPP)operation,supporting more reliable scheduling,grid stability,and risk-aware energy management.
基金supported by the Natural Sciences and Engineering Research Council (NSERC)Canada Research Chairs (CRC) Programs+2 种基金the financial support from the National Natural Science Foundation of China (51975033)the Beijing Natural Science Foundation (3192020)the China Scholarship Council (CSC) for the graduate fellowship
文摘With the increase in the use of electronic devices in many different environments,a need has arisen for an easily implemented method for the rapid,sensitive detection of liquids in the vicinity of electronic components.In this work,a high-performance power generator that combines carbon nanoparticles and TiO2 nanowires has been fabricated by sequential electrophoretic deposition(EPD).The opencircuit voltage and short-circuit current of a single generator are found to exceed 0.7 V and 100μA when 6μL of water was applied.The generator is also found to have a stable and reproducible response to other liquids.An output voltage of 0.3 V was obtained after 244,876,931,and 184μs,on exposure of the generator to 6μL of water,ethanol,acetone,and methanol,respectively.The fast response time and high sensitivity to liquids show that the device has great potential for the detection of small quantities of liquid.In addition,the simple easily implemented sequential EPD method ensures the high mechanical strength of the device.This compact,reliable device provides a new method for the sensitive,rapid detection of extraneous liquids before they can impact the performance of electronic circuits,particularly those on printed circuit board.
基金supported by National Natural Science Foundation of China (Nos. 50437020, 10675049)
文摘An all solid-state pulsed power generator for plasma immersion ion implantation （PIII） is described. The pulsed power system is based on a Marx circuit configuration and semi- conductor switches, which have many advantages in adjustable repetition frequency, pulse width modulation and long serving life compared with the conventional circuit category, tube-based technologies such as gridded vacuum tubes, thyratrons, pulse forming networks and transformers. The operation of PIII with pulse repetition frequencies up to 500 Hz has been achieved at a pulse voltage amplitude from 2 kV to 60 kV, with an adjustable pulse duration from 1 μs to 100 μs. The proposed system and its performance, as used to drive a plasma ion implantation chamber, are described in detail on the basis of the experimental results.
基金the National Science Council of the Republic of China,Taiwan,for fnancially supporting this research under Contract No.NSC 101-2218-E-539001 and NSC 102-2623-E-539-001-ET
文摘In this paper, we report a rapid synthesis of piezoelectric ZnO-nanostructures and fabrication of the nanostructures- based power-generators demonstrating an energy conversion from an environmental mechanical/ultrasonic energy to an electrical energy. The ZnO nanostructures are grown on a silicon wafer by a modified chemical solution method （CSD, chemical-solution-deposition） with a two-step thermal-oxidation approach. The synthesis process can be completed within 1 h. By varying the mixture-ratio of Zn micro-particles in an oxalic acid solution with 0.75 mol/l concentration in the CSD process, the growth mechanism is well-controlled to synthesize three different types of ZnO-nanostructures （i.e., dandelion-like nanostructures, columnar nanostructures, and nanowires）. Furthermore, through oxidizing at different temperatures in the thermal-oxidation process, the featured geometry of the nanostructures （e.g., the length and diameter of a nanowire） is modified. The geometry, size, morphology, crystallization, and material phase of the modified nanostructures are characterized by scanning electron microscopy and X-ray diffraction. Finally, the nanostructures are used to fabricate several micro power-generators. Through the piezoelectric effect, a maximum current density output of 0.28 μA cm-2 generated by a power-generator under an ultrasonic wave is observed.
