Poor solubility often results in low efficacy of antitumor drugs.Nevertheless,limited research has been conducted on the potential decrease in drug efficacy following the self-assembly of hydrophobic pure drugs into n...Poor solubility often results in low efficacy of antitumor drugs.Nevertheless,limited research has been conducted on the potential decrease in drug efficacy following the self-assembly of hydrophobic pure drugs into nanodrugs,and solutions to this problem are even rarer.Loading water-insoluble antitumor drugs into nanocarriers offers a promising solution.However,intricate carrier preparation,limited drug loading capacity,and carrier-associated safety remain key challenges.In this study,based on the discovery that hydrophobic gambogic acid(GA) self-assembles into nanostructures with diminished antitumor efficacy in aqueous environments,we developed a carrier-free nanodrug system,designated as GA-S-S-AS nanoparticles(NPs),characterized by straightforward preparation,high drug loading,fluorescence imaging,tumor-targeting,and responsive drug release in reducing environments.Specifically,the hydrophobic GA was covalently linked to the hydrophilic aptamer through a disulfide bond and then self-assembled into the nanodrugs.About 92 % of drug was encapsulated in self-assembled NPs,demonstrating remarkable stability under physiological conditions and controlled release of GA in the high-glutathione environment characteristic of tumor sites.Furthermore,by utilizing the synergistic interaction between the enhanced permeability and retention(EPR) effect and ligand-receptor active targeting mechanisms,the nanodrugs significantly increased the accumulation of GA at tumor locations.Consequently,the nanodrugs exhibited optimal therapeutic efficacy against the tumor both in vitro and in vivo,significantly inhibiting tumor growth.Furthermore,the nanodrugs demonstrated enhanced biosafety compared to free GA,effectively reducing GA-induced hepatotoxicity.Taken together,these findings underscore the significant potential of this multifunctional carrier-free nanodrugs for the targeted delivery of GA,thereby laying a foundation for future endeavors aimed at developing novel formulations of hydrophobic antitumor drugs.展开更多
Water molecules can form hydrogen bonds.At the solid surfaces,the preferential alignment of water molecules due to the heterogeneous atomic distributions can induce ordered hydrogen bond networks of water molecules wi...Water molecules can form hydrogen bonds.At the solid surfaces,the preferential alignment of water molecules due to the heterogeneous atomic distributions can induce ordered hydrogen bond networks of water molecules with spatially heterogeneous patterns and slower dynamics compared to bulk water.Both the confinement and the surface atomic structures can induce the water phase transitions at low dimensional spaces.Here,we review how the phase transitions of interfacial water affect the surface physical behaviors,such as wetting,ice nucleation and the terahertz-wave-water interactions,from solid materials to the biological surfaces.These works help extend our knowledge of the physics properties of the interfacial water,particularly the multi-phase behaviors in materials and biology sciences.展开更多
The formation of Zn dendrites and the occurrence of the hydrogen evolution reaction(HER)at Zn anodes represent two major obstacles that significantly impede the widespread commercialization of aqueous Zn-ion batteries...The formation of Zn dendrites and the occurrence of the hydrogen evolution reaction(HER)at Zn anodes represent two major obstacles that significantly impede the widespread commercialization of aqueous Zn-ion batteries.In this work,we propose sorbitan oleate(Span 80)as a novel amphiphilic electrolyte additive for 2 mol/L ZnSO_(4),demonstrating multifunctional performance.The unique ultra-long hydrophobic carbon chains of Span 80 effectively reduce free water molecules at the Zn anode-electrolyte interface,forming a robust hydrophobic interfacial layer that significantly suppresses HER and corrosion reactions.Simultaneously,carbon chains can enhance the desolvation effect of[Zn(H_(2)O)_(6)]^(2+),leading to improve rate performance.Additionally,the hydrophilic sorbitan groups in Span 80 selectively adsorb onto active sites of the Zn anode,promoting uniform Zn^(2+)deposition and suppressing dendrite growth.The optimized Zn||Zn symmetric cell exhibits outstanding cycling stability,sustaining reversible plating/stripping for 570 h at 50 mA/cm^(2) and the Zn||V_(2)O_(5) full cell retains exceptional stability over 2000 cycles at 1 A/g.Our work presents a promising strategy for suppressing interfacial side reactions by constructing a hydrophobic protective layer through the use of ultra-long carbon chain surfactants.This approach offers new insights into enhancing the performance of aqueous Zn-ion batteries.展开更多
MnO_(x)-CeO_(2)catalysts for the low-temperature selective catalytic reduction(SCR)of NO remain vulnerable to water and sulfur poisoning,limting their practical applications.Herein,we report a hydrophobic-modified MnO...MnO_(x)-CeO_(2)catalysts for the low-temperature selective catalytic reduction(SCR)of NO remain vulnerable to water and sulfur poisoning,limting their practical applications.Herein,we report a hydrophobic-modified MnO_(x)-CeO_(2)catalyst that achieves enhanced NO conversion rate and stability under harsh conditions.The catalyst was synthesized by decorating MnOx crystals with amorphous CeO_(2),followed by loading hydrophobic silica on the external surfaces.The hydrophobic silica allowed the adsorption of NH_(3)and NO and diffusion of H,suppressed the adsorption of H_(2)O,and prevented SO_(2)interaction with the Mn active sites,achieving selective molecular discrimination at the catalyst surface.At 120℃,under H_(2)O and SO_(2)exposure,the optimal hydrophobic catalyst maintains 82%NO conversion rate compared with 69%for the unmodified catalyst.The average adsorption energies of NH_(3),H_(2)O,and SO_(2)decreased by 0.05,0.43,and 0.52 eV,respectively.The NO reduction pathway follows the Eley-Rideal mechanism,NH_(3)^(*)+*→NH_(2)^(*)+H^(*)followed by NH_(2)^(*)+NO^(*)→N_(2)^(*)+H_(2)O^(*),with NH_(3)dehydrogenation being the rate determining step.Hydrophobic modification increased the activation energy for H atom transfer,leading to a minor decrease in the NO conversion rate at 120℃.This work demonstrates a viable strategy for developing robust NH_(3)-S CR catalysts capable of efficient operation in water-and sulfur-rich environments.展开更多
During the production processes of energy,metallurgy,chemical engineering,and other process industries,substantial high-temperature dustladen flue gas is generated.Asymmetric silicon carbide(SiC)membranes exhibit sign...During the production processes of energy,metallurgy,chemical engineering,and other process industries,substantial high-temperature dustladen flue gas is generated.Asymmetric silicon carbide(SiC)membranes exhibit significant potential in flue gas filtration since they enable direct filtration of high-temperature gas and facilitate thermal energy recovery.However,membrane particle penetration is a prevalent issue when constructing membrane layer directly on macroporous support,which contributes to a considerable mass transfer resistance.Herein,a novel hydrophobic modification strategy was developed to avoid the slurry penetration,thereby fabricating the asymmetric SiC membrane without the necessity of any intermediate or sacrificial layer.Firstly,the modifier concentration was adjusted to guarantee that the support was hydrophobic enough to prevent the slurry from penetrating.Subsequently,the slurry surface tension was fine-tuned by introducing ethanol to enhance the integrity of the SiC membrane.Furthermore,the effect of solid content was systematically investigated.It was demonstrated that the optimized SiC membranes obtained excellent gas permeance from 100.8 to 199.8 m^(3)·m^(-2)·h^(-1)·kPa^(-1)with the pore size ranging from 1.93 to 3.89μm.Also,the SiC membrane exhibited excellent stability for 24 h and achieved an excellent dust removal efficiency(99.99%)when filtering ultrafine dust particles(~300 nm)under high temperatures.This method effectively bridges the membrane particle penetration issue caused by the particle size disparity among different layers of the asymmetric membrane,establishing an efficient strategy to fabricate highpermeance SiC membranes applied in high-temperature dust-laden gas filtration.展开更多
Melamine sponge is a major concern for oil-water separation due to its lightweight,high porosity(>99%),cost-effectiveness,impressive mechanical properties,and chemical/thermal stability.However,its amphiphilic natu...Melamine sponge is a major concern for oil-water separation due to its lightweight,high porosity(>99%),cost-effectiveness,impressive mechanical properties,and chemical/thermal stability.However,its amphiphilic nature hinders selective oil absorption in water.Recent strategies to enhance hydrophobicity are reviewed,including synthetic methods and materials,with comprehensive explanations of the mechanisms driven by surface energy and roughness.Key performance indicators for MS in oil-water separation,including adsorption capacity,wettability,stability,emulsion separation,reversible wettability switching,flame retardancy,mechanical properties,and recyclability,are thoroughly discussed.In conclusion,this review provides insights into the future potential and direction of functional melamine sponges in oil-water separation.展开更多
Water often presents significant challenges in catalysts by deactivating active sites,poisoning the reaction,and even degrading composite structure.These challenges are amplified when the water participates as a react...Water often presents significant challenges in catalysts by deactivating active sites,poisoning the reaction,and even degrading composite structure.These challenges are amplified when the water participates as a reactant and is fed as a liquid phase,such as trickle bed-type reactors in a hydrogen-water isotope exchange(HIE)reaction.The key balance in such multiphase reactions is the precise control of catalyst design to repel bulk liquid water while diffusing water vapor.Herein,a platinum-incorporated metal-organic framework(MIL-101)based bifunctional hydrophobic catalyst functionalized with long alkyl chains(C_(12),dodecylamine)and further manufactured with poly(vinylidene fluoride),Pt@MIL-101-12/PVDF,has been developed which can show dramatically improved catalytic activity under multi-phase reactions involving hydrogen gas and liquid water.Pt@MIL-101-12/PVDF demonstrates enhanced macroscopic water-blocking properties,with a notable reduction of over 65%in water adsorption capacity and newly introduced liquid water repellency.while exhibiting a negligible increase in mass transfer resistance,i.e.,bifunctional hydrophobicity.Excellent catalytic activity,evaluated via HIE reaction,and its durability underscore the impact of bifunctional hydrophobicity.In situ DRIFTS analysis elucidates water adsorption/desorption dynamics within the catalyst composite,highlighting reinforced water diffusion at the microscopic level,affirming the catalyst's bifunctionality in different length scales.With demonstrated radiation resistance,Pt@MIL-101-12/PVDF emerges as a promising candidate for isotope exchange reactions.展开更多
Herein,the surface of Moso bamboo was hydrophobically modified by combining O_(2)/N_(2)plasma treatments with polydimethylsiloxane(PDMS)solution treatment as the hydrophobic solution.The effects of plasma treatment pr...Herein,the surface of Moso bamboo was hydrophobically modified by combining O_(2)/N_(2)plasma treatments with polydimethylsiloxane(PDMS)solution treatment as the hydrophobic solution.The effects of plasma treatment process(power and time),PDMS solution concentration,and maceration time on the hydrophobic performance of bamboo specimens were studied,and the optimal treatment conditions for improving the hydrophobicity were determined.Scanning electron microscopy(SEM),fourier transform infrared(FTIR),X-ray diffraction(XRD),and X-ray photoelectron spectroscopy(XPS)were used to analyze the surface morphology,chemical structure,and functional groups in the specimens before and after the plasma and PDMS solution treatments under optimal conditions.Response surface analysis was also performed to determine the optimal treatment conditions.Results show that the hydrophobic performance of the Moso bamboo surface is effectively improved and the surface energy is reduced after the coordinated treatment.The optimal conditions for improving the hydrophobic performance of Moso bamboo surface are a treatment power of 800 W,treatment time of 15 s,O_(2)flow rate of 1.5 L/min,PDMS solution concentration of 5%,and maceration time of 60 min for O_(2)plasma treatment and a treatment power of 1000 W,treatment time of 15 s,N_(2)flow rate of 1.5 L/min,PDMS solution concentration of 5%,and maceration time of 60 min for N_(2)plasma treatment.After treatment,silicone oil particles and plasma etching traces are observed on the bamboo surface.Moreover,Si-O bonds in the PDMS solution are grafted to the bamboo surface via covalent bonds,thereby increasing the contact angle and decreasing the surface energy to achieve the hydrophobic effect.展开更多
CO_(2)reduction reaction(CO_(2)RR)electrolyzers based on gas diffusion electrode(GDE)enable the direct mass transfer of CO_(2)to the catalyst surface for participation in the reaction,thereby establishing an efficient...CO_(2)reduction reaction(CO_(2)RR)electrolyzers based on gas diffusion electrode(GDE)enable the direct mass transfer of CO_(2)to the catalyst surface for participation in the reaction,thereby establishing an efficient three-phase reaction interface that significantly enhances current density.However,current hydrophobic modification methods face difficulties in achieving precise and substantial control over wettability,and the hydrophobic modifiers tend to significantly impair the conductivity of the electrode and ion transport capabilities.This study employs Nafion ionomers to hydrophobically modify the threedimensional catalyst layer,revealing the bifunctionality of Nafion.The fluorinated backbone of Nafion ensures the hydrophobicity of the entire catalyst layer,while its sulfonic acid groups promote ion transport,without significantly affecting the conductivity of the electrode.Furthermore,by employing modifiers with distinct wettability characteristics,a highly efficient and large-scale manipulation of the hydrophilic/hydrophobic properties of the catalyst layer was successfully realized.The electrode,constructed with silver nanopowder as a representative catalyst and modified with the hydrophobic ionomer Nafion,exhibits a substantial enhancement in both catalytic activity and durability.The optimized electrode exhibited exceptional electrocatalytic performance in both flow cell and membrane electrode assembly(MEA)configurations.Notably,in the MEA,the electrode achieved a remarkable CO Faradaic efficiency(FE)of 93.3%at a total current density of 200 mA cm^(-2),while maintaining stable operation for over 62 h.展开更多
As modern communication and detection technologies advance at a swift pace,multifunctional electromagnetic interference(EMI)shielding materials with active/positive infrared stealth,hydrophobicity,and electric-thermal...As modern communication and detection technologies advance at a swift pace,multifunctional electromagnetic interference(EMI)shielding materials with active/positive infrared stealth,hydrophobicity,and electric-thermal conversion ability have received extensive attention.Meeting the aforesaid requirements simultaneously remains a huge challenge.In this research,the melamine foam(MF)/polypyrrole(PPy)nanowire arrays(MF@PPy)were fabricated via one-step electrochemical polymerization.The hierarchical MF@PPy foam was composed of three-dimensional PPy micro-skeleton and ordered PPy nanowire arrays.Due to the upwardly grown PPy nanowire arrays,the MF@PPy foam possessed good hydrophobicity ability with a water contact angle of 142.00°and outstanding stability under various harsh environments.Meanwhile,the MF@PPy foam showed excellent thermal insulation property on account of the low thermal conductivity and elongated ligament characteristic of PPy nanowire arrays.Furthermore,taking advantage of the high conductivity(128.2 S m^(-1)),the MF@PPy foam exhibited rapid Joule heating under 3 V,resulting in dynamic infrared stealth and thermal camouflage effects.More importantly,the MF@PPy foam exhibited remarkable EMI shielding effectiveness values of 55.77 dB and 19,928.57 dB cm^(2)g^(-1).Strong EMI shielding was put down to the hierarchically porous PPy structure,which offered outstanding impedance matching,conduction loss,and multiple attenuations.This innovative approach provides significant insights to the development of advanced multifunctional EMI shielding foams by constructing PPy nanowire arrays,showing great applications in both military and civilian fields.展开更多
Sodium alginate(SA)is generally considered highly hydrophilic due to two hydroxyl groups and a carboxylate group on each pyranose ring.However,SA will form a gel after dissolving in water for a certain period.The two ...Sodium alginate(SA)is generally considered highly hydrophilic due to two hydroxyl groups and a carboxylate group on each pyranose ring.However,SA will form a gel after dissolving in water for a certain period.The two properties of SA,hydrophilicity and gelation,seem to be paradoxical.In this study,to explore the mechanism behind these paradoxical properties,the single-chain behaviors of SA in various liquid environments have been investigated by using single-molecule force spectroscopy(SMFS).In nonpolar solvents such as nonane,SA exhibits its single-chain inherent elasticity consistent with the theoretical elasticity derived from quantum mechanical(QM)calculations.Notably,the experimental curve of SA obtained in water shows a long plateau in the low force region.Further research reveals that this phenomenon is driven by the hydrophobic effect.Additionally,SA shows greater rigidity than its inherent elasticity in the middle and high force regions due to electrostatic repulsion between carboxylate groups on adjacent sugar rings.Comparative single-molecule studies suggest that SA exhibits considerable hydrophobicity,offering new insights into the gelation process in water.展开更多
A critical challenge hindering the practical application of lithium–oxygen batteries(LOBs)is the inevitable problems associated with liquid electrolytes,such as evaporation and safety problems.Our study addresses the...A critical challenge hindering the practical application of lithium–oxygen batteries(LOBs)is the inevitable problems associated with liquid electrolytes,such as evaporation and safety problems.Our study addresses these problems by proposing a modified polyrotaxane(mPR)-based solid polymer electrolyte(SPE)design that simultaneously mitigates solvent-related problems and improves conductivity.mPR-SPE exhibits high ion conductivity(2.8×10^(−3)S cm^(−1)at 25℃)through aligned ion conduction pathways and provides electrode protection ability through hydrophobic chain dispersion.Integrating this mPR-SPE into solid-state LOBs resulted in stable potentials over 300 cycles.In situ Raman spectroscopy reveals the presence of an LiO_(2)intermediate alongside Li_(2)O_(2)during oxygen reactions.Ex situ X-ray diffraction confirm the ability of the SPE to hinder the permeation of oxygen and moisture,as demonstrated by the air permeability tests.The present study suggests that maintaining a low residual solvent while achieving high ionic conductivity is crucial for restricting the sub-reactions of solid-state LOBs.展开更多
A radical C−C-coupling reaction of acetonitrile into succinonitrile over hydrophobic TiO_(2) photocatalyst with enhanced catalytic activity was developed.In addition,the usage of a flow reactor further improved the ph...A radical C−C-coupling reaction of acetonitrile into succinonitrile over hydrophobic TiO_(2) photocatalyst with enhanced catalytic activity was developed.In addition,the usage of a flow reactor further improved the photon utilization efficiency for succinonitrile synthesis at room temperature.The space time yield of succinonitrile reached 55.59μmol/(g·h)over hydrophobic TiO_(2) catalyst,which was much higher than that of pristine TiO_(2)(4.23μmol/(g·h)).Mechanistic studies revealed that the hydrophobic modification of TiO_(2) promoted the separation and transfer of photogenerated carriers,as well as suppressed their recombination.Hydrophobic TiO_(2) also enhanced the adsorption of−CH3 of acetonitrile,thus facilitating the activation of C−H bond and the utilization efficiency of photocarriers.展开更多
Plants possess a hydrophobic layer of wax on their aerial surface,consisting mainly of amorphous intra-cuticular wax and epicuticular wax crystals(Kunst and Samuels,2003).This waxy coating contains a wide variety of v...Plants possess a hydrophobic layer of wax on their aerial surface,consisting mainly of amorphous intra-cuticular wax and epicuticular wax crystals(Kunst and Samuels,2003).This waxy coating contains a wide variety of very-long-chain fatty acids(VLCFAs)and their derivatives,including alkanes,alcohols,aldehydes,esters,and ketones.展开更多
Two dimensional(2D)membranes show huge potential for ion sieving applications owing to their regular sub-nanometer channels.How to engineer the channel micro-chemistry to pursue higher ion selectivity while maintainin...Two dimensional(2D)membranes show huge potential for ion sieving applications owing to their regular sub-nanometer channels.How to engineer the channel micro-chemistry to pursue higher ion selectivity while maintaining promising ion transports remains challenging.In this work,we propose building rigidly confined charged 2D graphene oxide(GO)channels and manipulating their hydrophilicity via self-designed poly(ionic liquid)s(PILs)intercalation.The imidazolium cations on the PILs backbone not only stabilize the GO interlayer channels via non-covalent interactions but also create a positively charged environment for attracting anions entering into channels.The hydrophilicity variations of the side chains on the PILs help with realizing the regulation of the channel hydrophilicity.Under the electrodialysis mode,the GO membrane with the strongest hydrophobicity yields an impressive selectivity of 172.2 for Cl^(-)and SO_(4)^(2-),which is 48 times of Neosepta ACS,a commercial membrane specialized for anion separation.This work offers a brand-new route in exploring high-performance ion selective membranes.展开更多
Environmentally friendly slow-release fertilizers are highly desired in sustainable agriculture.Encapsulating fertilizers can routinely achieve controlled releasing performances but suffers from short-term effectivene...Environmentally friendly slow-release fertilizers are highly desired in sustainable agriculture.Encapsulating fertilizers can routinely achieve controlled releasing performances but suffers from short-term effectiveness or environmental unfriendliness.In this work,a bio-derived shellac incorporated with polydodecyl trimethoxysilane(SL-PDTMS)capsule was developed for long-term controlled releasing urea.Due to enhanced hydrophobicity and thus water resistance,the SL-PDTMS encapsulated urea fertilizer(SPEU)demonstrated a long-term effectiveness of 60 d,compared with SL encapsulated urea fertilizer(SEU,30 d)and pure urea fertilizer(U,5 min).In addition,SPEU showed a broad pH tolerance from 5.0 to 9.0,covering most various soil pH conditions.In the pot experiments,promoted growth of maize seedlings was observed after applying SPEU,rendering it promising as a high-performance controlled-released fertilizer.展开更多
Cu(I)based CO adsorbents are prone to oxidation and deactivation owing to the sensitivity of Cu^(+) ions to oxygen and moisture in the humid air.In this study,in order to improve its antioxidant performance,hydrophobi...Cu(I)based CO adsorbents are prone to oxidation and deactivation owing to the sensitivity of Cu^(+) ions to oxygen and moisture in the humid air.In this study,in order to improve its antioxidant performance,hydrophobic Cu(I)based adsorbents were fabricated using polytetrafluoroethylene(PTFE)for the hydrophobic modification,effectively avoiding the contact of CuCl active species with moisture,thereby inhibiting the oxidation of the Cu(I)based adsorbents.The successful introduction of PTFE into the activated carbon(AC)carrier significantly improves the hydrophobicity of the adsorbent.The optimal adsorbent CuCl(6)@AC-PTFE(0.10%)with the CuCl loading of 6 mmol·g^(-1)and the PTFE mass concentration of 0.10%exhibits an excellent CO adsorption capacity of 3.61 mmol·g^(-1)(303 K,500 kPa)as well as high CO/CO_(2)and CO/N_(2)adsorption selectivities of 29 and 203(303 K,100 kPa).Particularly,compared with the unmodified adsorbents,the antioxidant performance of modified adsorbent CuCl(6)@AC-PTFE(0.10%)is significantly improved,holding 86%of CO adsorption performance of fresh one after 24 h of exposure to humid air with a relative humidity of 70%,making the fabricated composite a promising adsorbent for CO separation.展开更多
Aqueous zinc-ion batteries(AZIBs)are pivotal for achieving net-zero goals,yet their commercialization is impeded by zinc dendrites,parasitic reactions,and interfacial instability.Current debates persist on the interpl...Aqueous zinc-ion batteries(AZIBs)are pivotal for achieving net-zero goals,yet their commercialization is impeded by zinc dendrites,parasitic reactions,and interfacial instability.Current debates persist on the interplay between zincophilic-hydrophilic and zincophobic-hydrophobic interactions at the anode-electrolyte interface.Herein,a conceptual framework that decouples these competing effects was proposed,enabling the rational design of a dual-layer architecture with an inner zincophilic layer for Zn^(2+)flux homogenization and an outer hydrophobic layer for water shielding.Through in situ and ex situ analyses,the synergistic mechanism was elucidated.During the cycling process,the zincophilic interface guides uniform Zn deposition,while the hydrophobic coating suppresses H_(2)O-induced side reactions.This dual modification achieves a Zn||Cu cell with an unprecedented 99.89%Coulombic efficiency and 975-cycle stability.This work resolves the long-standing controversy over interfacial affinity design,offering a scalable and industrially viable strategy to enhance AZIBs’durability without sacrificing energy density.展开更多
Polydimethylsiloxane(PDMS)is considered a low surface energy material widely used in(super)hydrophobic modification.In this paper,the high hydrophobic melamine sponges(MS)were modified with commercial aminopropyl func...Polydimethylsiloxane(PDMS)is considered a low surface energy material widely used in(super)hydrophobic modification.In this paper,the high hydrophobic melamine sponges(MS)were modified with commercial aminopropyl functionalized polydimethylsiloxane(NH_(2)-PDMS)with different molecular mass.The chemical composition,surface morphology,and wettability of the NH_(2)-PDMS-modified MS were investigated by X-ray photoelectron spectroscopy(XPS),attenuated total reflection Fourier transform infrared spectroscopy(ATR-FTIR)and contact angle test.Owing to the porous structure and high hydrophobicity,NH_(2)-PDMS-modified MS possesses remarkable absorption capacity(ranging from 46 to 155 times their own mass).Simultaneously,it can effectively separate oil-water mixtures with high separation efficiencies exceeding 98.2%.NH_(2)-PDMS-modified MS has no obvious change after 10 cycles of oil-water separation.The results demonstrate PDMS molecular mass on surface can revise material properties and achieve high separation efficiencies in oil-water separation.展开更多
Bioinspired superhydrophobic surfaces have been used for drag reduction.However,the secondary structures and the air cushions on these surfaces could be destructed in a flow,losing the effect of drag reduction.Here,a ...Bioinspired superhydrophobic surfaces have been used for drag reduction.However,the secondary structures and the air cushions on these surfaces could be destructed in a flow,losing the effect of drag reduction.Here,a stainless-steel surface with mushroom-like cross-section(SMC)and diamond cavities(SMCD)having a drag reduction rate up to 19.37%is developed by 3D printing.The concealed re-entrant structures in SMCD prevent the infiltration of water into the chamber and form gas cushions,which converts the sliding friction at liquid-solid interface into rolling friction at liquid-gas interface,realizing the drag reduction.Meanwhile,98.3%of air can be maintained in the chamber in a flow with Reynolds number(Re)of 9×10^(5),ensuring the drag reduction in a high-velocity flow.Moreover,the continuous top stainless-steel surface and the supporting mesh network protect the critical re-entrant structures,ensuring the robustness of SMC.With the bioinspired design and one-step additive manufacturing process,SMC holds great potential for large-area production and applications requiring robust drag reduction.展开更多
基金the National Natural Science Foundation of China (Nos.21907076 and 31901908)the Natural Science Foundation of Tianjin (No.22JCQNJC01570)。
文摘Poor solubility often results in low efficacy of antitumor drugs.Nevertheless,limited research has been conducted on the potential decrease in drug efficacy following the self-assembly of hydrophobic pure drugs into nanodrugs,and solutions to this problem are even rarer.Loading water-insoluble antitumor drugs into nanocarriers offers a promising solution.However,intricate carrier preparation,limited drug loading capacity,and carrier-associated safety remain key challenges.In this study,based on the discovery that hydrophobic gambogic acid(GA) self-assembles into nanostructures with diminished antitumor efficacy in aqueous environments,we developed a carrier-free nanodrug system,designated as GA-S-S-AS nanoparticles(NPs),characterized by straightforward preparation,high drug loading,fluorescence imaging,tumor-targeting,and responsive drug release in reducing environments.Specifically,the hydrophobic GA was covalently linked to the hydrophilic aptamer through a disulfide bond and then self-assembled into the nanodrugs.About 92 % of drug was encapsulated in self-assembled NPs,demonstrating remarkable stability under physiological conditions and controlled release of GA in the high-glutathione environment characteristic of tumor sites.Furthermore,by utilizing the synergistic interaction between the enhanced permeability and retention(EPR) effect and ligand-receptor active targeting mechanisms,the nanodrugs significantly increased the accumulation of GA at tumor locations.Consequently,the nanodrugs exhibited optimal therapeutic efficacy against the tumor both in vitro and in vivo,significantly inhibiting tumor growth.Furthermore,the nanodrugs demonstrated enhanced biosafety compared to free GA,effectively reducing GA-induced hepatotoxicity.Taken together,these findings underscore the significant potential of this multifunctional carrier-free nanodrugs for the targeted delivery of GA,thereby laying a foundation for future endeavors aimed at developing novel formulations of hydrophobic antitumor drugs.
基金supported by the National Natural Science Foundation of China(Grant Nos.22576126,12074394,12022508).
文摘Water molecules can form hydrogen bonds.At the solid surfaces,the preferential alignment of water molecules due to the heterogeneous atomic distributions can induce ordered hydrogen bond networks of water molecules with spatially heterogeneous patterns and slower dynamics compared to bulk water.Both the confinement and the surface atomic structures can induce the water phase transitions at low dimensional spaces.Here,we review how the phase transitions of interfacial water affect the surface physical behaviors,such as wetting,ice nucleation and the terahertz-wave-water interactions,from solid materials to the biological surfaces.These works help extend our knowledge of the physics properties of the interfacial water,particularly the multi-phase behaviors in materials and biology sciences.
基金supported by the financial support from the Guangdong Basic and Applied Basic Research Foundation(No.2023B1515120095)the National Natural Science Foundation of China(Nos.52471229 and 52171210)the Jilin Province Science and Technology Department Program(No.20240101004JJ).
文摘The formation of Zn dendrites and the occurrence of the hydrogen evolution reaction(HER)at Zn anodes represent two major obstacles that significantly impede the widespread commercialization of aqueous Zn-ion batteries.In this work,we propose sorbitan oleate(Span 80)as a novel amphiphilic electrolyte additive for 2 mol/L ZnSO_(4),demonstrating multifunctional performance.The unique ultra-long hydrophobic carbon chains of Span 80 effectively reduce free water molecules at the Zn anode-electrolyte interface,forming a robust hydrophobic interfacial layer that significantly suppresses HER and corrosion reactions.Simultaneously,carbon chains can enhance the desolvation effect of[Zn(H_(2)O)_(6)]^(2+),leading to improve rate performance.Additionally,the hydrophilic sorbitan groups in Span 80 selectively adsorb onto active sites of the Zn anode,promoting uniform Zn^(2+)deposition and suppressing dendrite growth.The optimized Zn||Zn symmetric cell exhibits outstanding cycling stability,sustaining reversible plating/stripping for 570 h at 50 mA/cm^(2) and the Zn||V_(2)O_(5) full cell retains exceptional stability over 2000 cycles at 1 A/g.Our work presents a promising strategy for suppressing interfacial side reactions by constructing a hydrophobic protective layer through the use of ultra-long carbon chain surfactants.This approach offers new insights into enhancing the performance of aqueous Zn-ion batteries.
基金financially sponsored by the National Natural Science Foundation of China(No.52204414)the National Energy-Saving and Low-Carbon Materials Production and Application Demonstration Platform Program,China(No.TC220H06N)+1 种基金the National Key R&D Program of China(No.2021YFC1910504)the Fundamental Research Funds for the Central Universities,China(No.FRFTP-20-097A1Z)。
文摘MnO_(x)-CeO_(2)catalysts for the low-temperature selective catalytic reduction(SCR)of NO remain vulnerable to water and sulfur poisoning,limting their practical applications.Herein,we report a hydrophobic-modified MnO_(x)-CeO_(2)catalyst that achieves enhanced NO conversion rate and stability under harsh conditions.The catalyst was synthesized by decorating MnOx crystals with amorphous CeO_(2),followed by loading hydrophobic silica on the external surfaces.The hydrophobic silica allowed the adsorption of NH_(3)and NO and diffusion of H,suppressed the adsorption of H_(2)O,and prevented SO_(2)interaction with the Mn active sites,achieving selective molecular discrimination at the catalyst surface.At 120℃,under H_(2)O and SO_(2)exposure,the optimal hydrophobic catalyst maintains 82%NO conversion rate compared with 69%for the unmodified catalyst.The average adsorption energies of NH_(3),H_(2)O,and SO_(2)decreased by 0.05,0.43,and 0.52 eV,respectively.The NO reduction pathway follows the Eley-Rideal mechanism,NH_(3)^(*)+*→NH_(2)^(*)+H^(*)followed by NH_(2)^(*)+NO^(*)→N_(2)^(*)+H_(2)O^(*),with NH_(3)dehydrogenation being the rate determining step.Hydrophobic modification increased the activation energy for H atom transfer,leading to a minor decrease in the NO conversion rate at 120℃.This work demonstrates a viable strategy for developing robust NH_(3)-S CR catalysts capable of efficient operation in water-and sulfur-rich environments.
基金Financial support was provided by the National Natural Science Foundation of China(22325804,22578197)National Key Research and Development Project of China(2021YFB3801302,2022YFC3900300)+1 种基金Jiangsu Future Membrane Technology Innovation Center(No.BM2021804)Natural Science Foundation of Jiangsu Higher Education Institutions of China(No.25KJA530003).
文摘During the production processes of energy,metallurgy,chemical engineering,and other process industries,substantial high-temperature dustladen flue gas is generated.Asymmetric silicon carbide(SiC)membranes exhibit significant potential in flue gas filtration since they enable direct filtration of high-temperature gas and facilitate thermal energy recovery.However,membrane particle penetration is a prevalent issue when constructing membrane layer directly on macroporous support,which contributes to a considerable mass transfer resistance.Herein,a novel hydrophobic modification strategy was developed to avoid the slurry penetration,thereby fabricating the asymmetric SiC membrane without the necessity of any intermediate or sacrificial layer.Firstly,the modifier concentration was adjusted to guarantee that the support was hydrophobic enough to prevent the slurry from penetrating.Subsequently,the slurry surface tension was fine-tuned by introducing ethanol to enhance the integrity of the SiC membrane.Furthermore,the effect of solid content was systematically investigated.It was demonstrated that the optimized SiC membranes obtained excellent gas permeance from 100.8 to 199.8 m^(3)·m^(-2)·h^(-1)·kPa^(-1)with the pore size ranging from 1.93 to 3.89μm.Also,the SiC membrane exhibited excellent stability for 24 h and achieved an excellent dust removal efficiency(99.99%)when filtering ultrafine dust particles(~300 nm)under high temperatures.This method effectively bridges the membrane particle penetration issue caused by the particle size disparity among different layers of the asymmetric membrane,establishing an efficient strategy to fabricate highpermeance SiC membranes applied in high-temperature dust-laden gas filtration.
基金supported by the National Natural Science Foundation of China(Nos.52372093 and 52102145)the Key R&D Program of Shaanxi Province(Nos.2023GXLH-045 and 2022SF-168)+4 种基金the Xi’an Programs for Science and Technology Plan(Nos.2020KJRC0090 and 21XJZZ0045)the Opening Project of Shanxi Key Laboratory of Advanced Manufacturing Technology(No.XJZZ202001)the Xi’an Municipal Bureau of Science and Technology(No.21XJZZ0054)the Open Foundation of Key Laboratory of Auxiliary Chemistry and Technology for Chemical Industry,Ministry of Education,Shaanxi University of Science and Technology(No.KFKT2021-01)the Shaanxi Collaborative Innovation Center of Industrial Auxiliary Chemistry and Technology,Shaanxi University of Science and Technology(No.KFKT2021-01).
文摘Melamine sponge is a major concern for oil-water separation due to its lightweight,high porosity(>99%),cost-effectiveness,impressive mechanical properties,and chemical/thermal stability.However,its amphiphilic nature hinders selective oil absorption in water.Recent strategies to enhance hydrophobicity are reviewed,including synthetic methods and materials,with comprehensive explanations of the mechanisms driven by surface energy and roughness.Key performance indicators for MS in oil-water separation,including adsorption capacity,wettability,stability,emulsion separation,reversible wettability switching,flame retardancy,mechanical properties,and recyclability,are thoroughly discussed.In conclusion,this review provides insights into the future potential and direction of functional melamine sponges in oil-water separation.
基金supported by grants from the National Research Foundation of Korea(NRF)under grant No.RS-2022-00155422 and No.2021R1C1C102014。
文摘Water often presents significant challenges in catalysts by deactivating active sites,poisoning the reaction,and even degrading composite structure.These challenges are amplified when the water participates as a reactant and is fed as a liquid phase,such as trickle bed-type reactors in a hydrogen-water isotope exchange(HIE)reaction.The key balance in such multiphase reactions is the precise control of catalyst design to repel bulk liquid water while diffusing water vapor.Herein,a platinum-incorporated metal-organic framework(MIL-101)based bifunctional hydrophobic catalyst functionalized with long alkyl chains(C_(12),dodecylamine)and further manufactured with poly(vinylidene fluoride),Pt@MIL-101-12/PVDF,has been developed which can show dramatically improved catalytic activity under multi-phase reactions involving hydrogen gas and liquid water.Pt@MIL-101-12/PVDF demonstrates enhanced macroscopic water-blocking properties,with a notable reduction of over 65%in water adsorption capacity and newly introduced liquid water repellency.while exhibiting a negligible increase in mass transfer resistance,i.e.,bifunctional hydrophobicity.Excellent catalytic activity,evaluated via HIE reaction,and its durability underscore the impact of bifunctional hydrophobicity.In situ DRIFTS analysis elucidates water adsorption/desorption dynamics within the catalyst composite,highlighting reinforced water diffusion at the microscopic level,affirming the catalyst's bifunctionality in different length scales.With demonstrated radiation resistance,Pt@MIL-101-12/PVDF emerges as a promising candidate for isotope exchange reactions.
基金Zhejiang Provincial Cooperative Forestry Science and Technology Project(No.2023SY05)Zhejiang Provincial Science and Technology Project(No.2024F1065-2).
文摘Herein,the surface of Moso bamboo was hydrophobically modified by combining O_(2)/N_(2)plasma treatments with polydimethylsiloxane(PDMS)solution treatment as the hydrophobic solution.The effects of plasma treatment process(power and time),PDMS solution concentration,and maceration time on the hydrophobic performance of bamboo specimens were studied,and the optimal treatment conditions for improving the hydrophobicity were determined.Scanning electron microscopy(SEM),fourier transform infrared(FTIR),X-ray diffraction(XRD),and X-ray photoelectron spectroscopy(XPS)were used to analyze the surface morphology,chemical structure,and functional groups in the specimens before and after the plasma and PDMS solution treatments under optimal conditions.Response surface analysis was also performed to determine the optimal treatment conditions.Results show that the hydrophobic performance of the Moso bamboo surface is effectively improved and the surface energy is reduced after the coordinated treatment.The optimal conditions for improving the hydrophobic performance of Moso bamboo surface are a treatment power of 800 W,treatment time of 15 s,O_(2)flow rate of 1.5 L/min,PDMS solution concentration of 5%,and maceration time of 60 min for O_(2)plasma treatment and a treatment power of 1000 W,treatment time of 15 s,N_(2)flow rate of 1.5 L/min,PDMS solution concentration of 5%,and maceration time of 60 min for N_(2)plasma treatment.After treatment,silicone oil particles and plasma etching traces are observed on the bamboo surface.Moreover,Si-O bonds in the PDMS solution are grafted to the bamboo surface via covalent bonds,thereby increasing the contact angle and decreasing the surface energy to achieve the hydrophobic effect.
基金National Key R&D Program of China(2023YFA1507902,2021YFA1500804)the National Natural Science Foundation of China(22121004,22038009,22250008)+2 种基金the Haihe Laboratory of Sustainable Chemical Transformations(CYZC202107)the Program of Introducing Talents of Discipline to Universities,China(No.BP0618007)the Xplorer Prize,China,for their financial support。
文摘CO_(2)reduction reaction(CO_(2)RR)electrolyzers based on gas diffusion electrode(GDE)enable the direct mass transfer of CO_(2)to the catalyst surface for participation in the reaction,thereby establishing an efficient three-phase reaction interface that significantly enhances current density.However,current hydrophobic modification methods face difficulties in achieving precise and substantial control over wettability,and the hydrophobic modifiers tend to significantly impair the conductivity of the electrode and ion transport capabilities.This study employs Nafion ionomers to hydrophobically modify the threedimensional catalyst layer,revealing the bifunctionality of Nafion.The fluorinated backbone of Nafion ensures the hydrophobicity of the entire catalyst layer,while its sulfonic acid groups promote ion transport,without significantly affecting the conductivity of the electrode.Furthermore,by employing modifiers with distinct wettability characteristics,a highly efficient and large-scale manipulation of the hydrophilic/hydrophobic properties of the catalyst layer was successfully realized.The electrode,constructed with silver nanopowder as a representative catalyst and modified with the hydrophobic ionomer Nafion,exhibits a substantial enhancement in both catalytic activity and durability.The optimized electrode exhibited exceptional electrocatalytic performance in both flow cell and membrane electrode assembly(MEA)configurations.Notably,in the MEA,the electrode achieved a remarkable CO Faradaic efficiency(FE)of 93.3%at a total current density of 200 mA cm^(-2),while maintaining stable operation for over 62 h.
基金supported by the Key Research and Development Program of Sichuan Province(Grant No.2023ZHCG0050)the Fundamental Research Funds for the Central Universities of China(Grant No.2682024QZ006 and 2682024ZTPY042)the Analytic and Testing Center of Southwest Jiaotong University.
文摘As modern communication and detection technologies advance at a swift pace,multifunctional electromagnetic interference(EMI)shielding materials with active/positive infrared stealth,hydrophobicity,and electric-thermal conversion ability have received extensive attention.Meeting the aforesaid requirements simultaneously remains a huge challenge.In this research,the melamine foam(MF)/polypyrrole(PPy)nanowire arrays(MF@PPy)were fabricated via one-step electrochemical polymerization.The hierarchical MF@PPy foam was composed of three-dimensional PPy micro-skeleton and ordered PPy nanowire arrays.Due to the upwardly grown PPy nanowire arrays,the MF@PPy foam possessed good hydrophobicity ability with a water contact angle of 142.00°and outstanding stability under various harsh environments.Meanwhile,the MF@PPy foam showed excellent thermal insulation property on account of the low thermal conductivity and elongated ligament characteristic of PPy nanowire arrays.Furthermore,taking advantage of the high conductivity(128.2 S m^(-1)),the MF@PPy foam exhibited rapid Joule heating under 3 V,resulting in dynamic infrared stealth and thermal camouflage effects.More importantly,the MF@PPy foam exhibited remarkable EMI shielding effectiveness values of 55.77 dB and 19,928.57 dB cm^(2)g^(-1).Strong EMI shielding was put down to the hierarchically porous PPy structure,which offered outstanding impedance matching,conduction loss,and multiple attenuations.This innovative approach provides significant insights to the development of advanced multifunctional EMI shielding foams by constructing PPy nanowire arrays,showing great applications in both military and civilian fields.
基金financially supported by the National Natural Science Foundation of China(No.22273079)。
文摘Sodium alginate(SA)is generally considered highly hydrophilic due to two hydroxyl groups and a carboxylate group on each pyranose ring.However,SA will form a gel after dissolving in water for a certain period.The two properties of SA,hydrophilicity and gelation,seem to be paradoxical.In this study,to explore the mechanism behind these paradoxical properties,the single-chain behaviors of SA in various liquid environments have been investigated by using single-molecule force spectroscopy(SMFS).In nonpolar solvents such as nonane,SA exhibits its single-chain inherent elasticity consistent with the theoretical elasticity derived from quantum mechanical(QM)calculations.Notably,the experimental curve of SA obtained in water shows a long plateau in the low force region.Further research reveals that this phenomenon is driven by the hydrophobic effect.Additionally,SA shows greater rigidity than its inherent elasticity in the middle and high force regions due to electrostatic repulsion between carboxylate groups on adjacent sugar rings.Comparative single-molecule studies suggest that SA exhibits considerable hydrophobicity,offering new insights into the gelation process in water.
基金supported by a National Research Foundation of Korea(NRF)Grant funded by the Ministry of Science and ICT(2021R1A2C1014294,2022R1A2C3003319)the BK21 FOUR(Fostering Outstanding Universities for Research)through the National Research Foundation(NRF)of Korea.
文摘A critical challenge hindering the practical application of lithium–oxygen batteries(LOBs)is the inevitable problems associated with liquid electrolytes,such as evaporation and safety problems.Our study addresses these problems by proposing a modified polyrotaxane(mPR)-based solid polymer electrolyte(SPE)design that simultaneously mitigates solvent-related problems and improves conductivity.mPR-SPE exhibits high ion conductivity(2.8×10^(−3)S cm^(−1)at 25℃)through aligned ion conduction pathways and provides electrode protection ability through hydrophobic chain dispersion.Integrating this mPR-SPE into solid-state LOBs resulted in stable potentials over 300 cycles.In situ Raman spectroscopy reveals the presence of an LiO_(2)intermediate alongside Li_(2)O_(2)during oxygen reactions.Ex situ X-ray diffraction confirm the ability of the SPE to hinder the permeation of oxygen and moisture,as demonstrated by the air permeability tests.The present study suggests that maintaining a low residual solvent while achieving high ionic conductivity is crucial for restricting the sub-reactions of solid-state LOBs.
基金supported by the National Key R&D Program of China(2021YFF0500703)Natural Science Foundation of Shanghai(22JC1404200)+3 种基金Program of Shanghai Academic/Technology Research Leader(20XD1404000)Natural Science Foundation of China(U22B20136,22293023)Science and Technology Major Project of Inner Mongolia(2021ZD0042)the Youth Innovation Promotion Association of CAS。
文摘A radical C−C-coupling reaction of acetonitrile into succinonitrile over hydrophobic TiO_(2) photocatalyst with enhanced catalytic activity was developed.In addition,the usage of a flow reactor further improved the photon utilization efficiency for succinonitrile synthesis at room temperature.The space time yield of succinonitrile reached 55.59μmol/(g·h)over hydrophobic TiO_(2) catalyst,which was much higher than that of pristine TiO_(2)(4.23μmol/(g·h)).Mechanistic studies revealed that the hydrophobic modification of TiO_(2) promoted the separation and transfer of photogenerated carriers,as well as suppressed their recombination.Hydrophobic TiO_(2) also enhanced the adsorption of−CH3 of acetonitrile,thus facilitating the activation of C−H bond and the utilization efficiency of photocarriers.
基金supported by grants from the National Natural Science Foundation of China(Grant No.31972405).
文摘Plants possess a hydrophobic layer of wax on their aerial surface,consisting mainly of amorphous intra-cuticular wax and epicuticular wax crystals(Kunst and Samuels,2003).This waxy coating contains a wide variety of very-long-chain fatty acids(VLCFAs)and their derivatives,including alkanes,alcohols,aldehydes,esters,and ketones.
基金supported by the National Key Research and Development Program of China(2022YFB3805100)the National Natural Science Foundation of China(22278105,21978062).
文摘Two dimensional(2D)membranes show huge potential for ion sieving applications owing to their regular sub-nanometer channels.How to engineer the channel micro-chemistry to pursue higher ion selectivity while maintaining promising ion transports remains challenging.In this work,we propose building rigidly confined charged 2D graphene oxide(GO)channels and manipulating their hydrophilicity via self-designed poly(ionic liquid)s(PILs)intercalation.The imidazolium cations on the PILs backbone not only stabilize the GO interlayer channels via non-covalent interactions but also create a positively charged environment for attracting anions entering into channels.The hydrophilicity variations of the side chains on the PILs help with realizing the regulation of the channel hydrophilicity.Under the electrodialysis mode,the GO membrane with the strongest hydrophobicity yields an impressive selectivity of 172.2 for Cl^(-)and SO_(4)^(2-),which is 48 times of Neosepta ACS,a commercial membrane specialized for anion separation.This work offers a brand-new route in exploring high-performance ion selective membranes.
基金the National Natural Science Foundation of China(Nos.22278415 and 52225309)Chinese Academy of Sciences(No.027GJHZ2022033GC).
文摘Environmentally friendly slow-release fertilizers are highly desired in sustainable agriculture.Encapsulating fertilizers can routinely achieve controlled releasing performances but suffers from short-term effectiveness or environmental unfriendliness.In this work,a bio-derived shellac incorporated with polydodecyl trimethoxysilane(SL-PDTMS)capsule was developed for long-term controlled releasing urea.Due to enhanced hydrophobicity and thus water resistance,the SL-PDTMS encapsulated urea fertilizer(SPEU)demonstrated a long-term effectiveness of 60 d,compared with SL encapsulated urea fertilizer(SEU,30 d)and pure urea fertilizer(U,5 min).In addition,SPEU showed a broad pH tolerance from 5.0 to 9.0,covering most various soil pH conditions.In the pot experiments,promoted growth of maize seedlings was observed after applying SPEU,rendering it promising as a high-performance controlled-released fertilizer.
基金supported by the Natural Science Foundation of Shandong Province(ZR2021MB135)the Major Scientific and Technological Innovation Project of Shandong Province(2021ZDSYS13).
文摘Cu(I)based CO adsorbents are prone to oxidation and deactivation owing to the sensitivity of Cu^(+) ions to oxygen and moisture in the humid air.In this study,in order to improve its antioxidant performance,hydrophobic Cu(I)based adsorbents were fabricated using polytetrafluoroethylene(PTFE)for the hydrophobic modification,effectively avoiding the contact of CuCl active species with moisture,thereby inhibiting the oxidation of the Cu(I)based adsorbents.The successful introduction of PTFE into the activated carbon(AC)carrier significantly improves the hydrophobicity of the adsorbent.The optimal adsorbent CuCl(6)@AC-PTFE(0.10%)with the CuCl loading of 6 mmol·g^(-1)and the PTFE mass concentration of 0.10%exhibits an excellent CO adsorption capacity of 3.61 mmol·g^(-1)(303 K,500 kPa)as well as high CO/CO_(2)and CO/N_(2)adsorption selectivities of 29 and 203(303 K,100 kPa).Particularly,compared with the unmodified adsorbents,the antioxidant performance of modified adsorbent CuCl(6)@AC-PTFE(0.10%)is significantly improved,holding 86%of CO adsorption performance of fresh one after 24 h of exposure to humid air with a relative humidity of 70%,making the fabricated composite a promising adsorbent for CO separation.
基金supported by the National Natural Science Foundation of China(U2130204)the Joint Funds of the National Key R&D Program of China(2022YFB2502102)+1 种基金the Young Elite Scientists Sponsorship Program by CAST(YESS20200364)the Beijing Outstanding Young Scientists Program(BJJWZYJH01201910007023)。
文摘Aqueous zinc-ion batteries(AZIBs)are pivotal for achieving net-zero goals,yet their commercialization is impeded by zinc dendrites,parasitic reactions,and interfacial instability.Current debates persist on the interplay between zincophilic-hydrophilic and zincophobic-hydrophobic interactions at the anode-electrolyte interface.Herein,a conceptual framework that decouples these competing effects was proposed,enabling the rational design of a dual-layer architecture with an inner zincophilic layer for Zn^(2+)flux homogenization and an outer hydrophobic layer for water shielding.Through in situ and ex situ analyses,the synergistic mechanism was elucidated.During the cycling process,the zincophilic interface guides uniform Zn deposition,while the hydrophobic coating suppresses H_(2)O-induced side reactions.This dual modification achieves a Zn||Cu cell with an unprecedented 99.89%Coulombic efficiency and 975-cycle stability.This work resolves the long-standing controversy over interfacial affinity design,offering a scalable and industrially viable strategy to enhance AZIBs’durability without sacrificing energy density.
基金Project(2025JJ70532)supported by the Natural Science Foundation of Hunan Province,ChinaProjects(21862009,21563016)supported by the National Natural Science Foundation of ChinaProject(2022GX020)supported by the Taian Science and Technology Innovation Development Project,China。
文摘Polydimethylsiloxane(PDMS)is considered a low surface energy material widely used in(super)hydrophobic modification.In this paper,the high hydrophobic melamine sponges(MS)were modified with commercial aminopropyl functionalized polydimethylsiloxane(NH_(2)-PDMS)with different molecular mass.The chemical composition,surface morphology,and wettability of the NH_(2)-PDMS-modified MS were investigated by X-ray photoelectron spectroscopy(XPS),attenuated total reflection Fourier transform infrared spectroscopy(ATR-FTIR)and contact angle test.Owing to the porous structure and high hydrophobicity,NH_(2)-PDMS-modified MS possesses remarkable absorption capacity(ranging from 46 to 155 times their own mass).Simultaneously,it can effectively separate oil-water mixtures with high separation efficiencies exceeding 98.2%.NH_(2)-PDMS-modified MS has no obvious change after 10 cycles of oil-water separation.The results demonstrate PDMS molecular mass on surface can revise material properties and achieve high separation efficiencies in oil-water separation.
基金supported by National Natural Science Foundation of China(52373119,52475310)the National Key R&D Program of China(2022YFB4701000).
文摘Bioinspired superhydrophobic surfaces have been used for drag reduction.However,the secondary structures and the air cushions on these surfaces could be destructed in a flow,losing the effect of drag reduction.Here,a stainless-steel surface with mushroom-like cross-section(SMC)and diamond cavities(SMCD)having a drag reduction rate up to 19.37%is developed by 3D printing.The concealed re-entrant structures in SMCD prevent the infiltration of water into the chamber and form gas cushions,which converts the sliding friction at liquid-solid interface into rolling friction at liquid-gas interface,realizing the drag reduction.Meanwhile,98.3%of air can be maintained in the chamber in a flow with Reynolds number(Re)of 9×10^(5),ensuring the drag reduction in a high-velocity flow.Moreover,the continuous top stainless-steel surface and the supporting mesh network protect the critical re-entrant structures,ensuring the robustness of SMC.With the bioinspired design and one-step additive manufacturing process,SMC holds great potential for large-area production and applications requiring robust drag reduction.
