Conventional polyethylene(PE)fibers face limitations in large-scale industrial applications due to their poor thermal stability and inherent hydrophobicity,which restrict processing temperatures and dyeability,especia...Conventional polyethylene(PE)fibers face limitations in large-scale industrial applications due to their poor thermal stability and inherent hydrophobicity,which restrict processing temperatures and dyeability,especially in blended fabric production.In this research,a one-step ultraviolet(UV)irradiation technology was employed to modify medium molecular weight PE fibers through simultaneous crosslinking and grafting modifications,aiming to enhance their thermal stability and hydrophilicity.The modification employed a cost-effective,UV-initiated crosslinking system consisting of benzophenone(BP)as the photoinitiator and triallyl isocyanurate(TAIC)as the cocrosslinker.Acrylic acid(AA)was selected as the grafting monomer.These modifiers were thoroughly mixed with the PE matrix in a liquid-phase environment,and the mixture was melt-spun into fibers.The resulting fibers were then subjected to UV irradiation,which triggered the crosslinking and grafting reactions.The effects of the mass fraction of each component and irradiation parameters on modification efficacy were systematically investigated,followed by a comprehensive characterization of the modified PE fibers.The modified PE fibers achieved optimal thermal stability under the following conditions:2.0%mass fractions for both BP and TAIC,a UV irradiation intensity of 2000 mW/cm^(2),and an equivalent irradiation time of 60 s.This synergistic modification approach enables the fibers to maintain superior morphological integrity and mechanical performance when exposed to elevated temperatures ranging from 130 to 150℃.Meanwhile,an AA grafting mass fraction of 2.0%maximizes hydrophilicity with minimal impact on other properties,as evidenced by a dramatic reduction in the water contact angle(WCA)from 105.0°(hydrophobic)to 48.4°(hydrophilic).These improvements confirm the effectiveness of the modification strategy in synergistically enhancing both thermal stability and hydrophilicity of PE fibers.展开更多
Constructing multi-dimensional hydrogen bond(H-bond)regulated single-molecule systems with multiemission remains a challenge.Herein,we report the design of a new excited-state intramolecular proton transfer(ESIPT)feat...Constructing multi-dimensional hydrogen bond(H-bond)regulated single-molecule systems with multiemission remains a challenge.Herein,we report the design of a new excited-state intramolecular proton transfer(ESIPT)featured chromophore(HBT-DPI)that shows flexible emission tunability via the multidimensional regulation of intra-and intermolecular H-bonds.The feature of switchable intramolecular Hbonds is induced via incorporating several hydrogen bond acceptors and donors into one single HBT-DPI molecule,allowing the“turn on/off”of ESIPT process by forming isomers with distinct intramolecular Hbonds configurations.In response to different external H-bonding environments,the obtained four types of crystal/cocrystals vary in the contents of isomers and the molecular packing modes,which are mainly guided by the intermolecular H-bonds,exhibiting non-emissive features or emissions ranging from green to orange.Utilizing the feature of intermolecular H-bond guided molecular packing,we demonstrate the utility of this fluorescent material for visualizing hydrophobic/hydrophilic areas on large-scale heterogeneous surfaces of modified poly(1,1-difluoroethylene)(PVDF)membranes and quantitatively estimating the surface hydrophobicity,providing a new approach for hydrophobicity/hydrophilicity monitoring and measurement.Overall,this study represents a new design strategy for constructing multi-dimensional hydrogen bond regulated ESIPT-based fluorescent materials that enable multiple emissions and unique applications.展开更多
Ta-containing TiO2 films with Ta contents of 5%, 20%, 33% （mole fraction） were sol-gel coated on the surface roughened Ti6AI4V alloy by dip coating method for biomedical applications. The Ta-TiO2 films on 1.5 mol/L ...Ta-containing TiO2 films with Ta contents of 5%, 20%, 33% （mole fraction） were sol-gel coated on the surface roughened Ti6AI4V alloy by dip coating method for biomedical applications. The Ta-TiO2 films on 1.5 mol/L NaOH-HCI pretreated substrate are adherent, but there are cracks for the sample with 33% Ta. X-ray photoelectron spectroscopy results show that Ti and Ta exist as TiP2 and Ta205 in the film, and A1 element is not detectable. X-ray diffraction and Raman scattering analyses reveal that the addition of Ta decreases crystallization of the films. Potentiodynamic polarization test in a Ca-free Hank＇s balanced solution demonstrates that the coating samples markedly improve the corrosion resistance compared with the polished sample. The addition of Ta impedes UV light-induced hydrophilic conversion of the coating samples. The sample with 20% Ta has enough film integrity and hydrophilic conversion rate, and is expected to possess good biological properties.展开更多
Porous polyvinylidene fluoride（PVDF）membranes blended with LiCl are prepared through the phase inversion method to obtain a good support layer for air dehumidification.The hydrophilicity of the resulting membrane is...Porous polyvinylidene fluoride（PVDF）membranes blended with LiCl are prepared through the phase inversion method to obtain a good support layer for air dehumidification.The hydrophilicity of the resulting membrane is evaluated by water contact angle measurements and vapor adsorption tests.The moisture permeation performance of the membrane is measured by permeation tests in terms of total mass transfer coefficients and moisture permeability rates.It is found that water contact angles and water vapor adsorption capacities increase with the increasing LiCl content in the casting solution.As the LiCl content increases,the total mass transfer coefficient increases slightly at a low LiCl content（below 2.5%）and then improves greatly at a high LiCl content（above 2.5%）,whereas the moisture permeation rate increases.The results demonstrate that LiCl can remarkably improve the hydrophilicity of PVDF membranes,and then greatly enhance moisture permeation performance.展开更多
Nanowires with anisotropic morphologies have been applied in various scientific and technological areas.It is also widely employed to fabricate nanowires into high-dimensional superstructures(arrays,networks etc.)to o...Nanowires with anisotropic morphologies have been applied in various scientific and technological areas.It is also widely employed to fabricate nanowires into high-dimensional superstructures(arrays,networks etc.)to overcome the shortcomings of low-dimensional nanowires.However,typical strategies for constructing these superstructures are restricted to complicated and harsh synthetic conditions,not to mention unique 3D structures with advanced properties beyond common superstructures.Herein,we report an unusual network ofα-MnO_(2)nanowires with structure-induced hydrophilicity and conductivity.In the network,the nanowires are interconnected from all directions by nodes,and the 3D network structure is formed from the endless connection of nodes in a node-by-node way.The unique network structure brings about high hydrophilicity and conductivity,both of which are positive factors for an efficient electrocatalyst.Accordingly,the α-MnO_(2) network was tested for electrocatalytic water oxidation and showed significantly enhanced activity compared with isolatedα-MnO_(2)nanowires and 3Dα-MnO_(2)microspheres.This study not only provides a synthetic route toward an advanced network structure but also a new idea for the design of materials for electrochemistry with both efficient mass diffusion and charge transfer.展开更多
Herein, functionalized graphene oxide（GO） was prepared by the covalent functionalization with amino acids（lysine, glycine, glutamic acid and tyrosine） in this study. Zeta potential results demonstrated that covale...Herein, functionalized graphene oxide（GO） was prepared by the covalent functionalization with amino acids（lysine, glycine, glutamic acid and tyrosine） in this study. Zeta potential results demonstrated that covalent functionalization of GO with amino acids was favourable for their homogeneous dispersion in water and organic solvents. Based on the higher absolute value of zeta potential and the better dipersion stability of GO-lysine, the PVDF/GO-lysine hybrid membranes were then prepared via the phase inversion induced by immersion precipitation technique. SEM images showed a better pore diameter and porosity distribution on the PVDF/GO-lysine membrane surface. The zeta potential absolute value of the PVDF/GO-lysine membrane surface was higher than that of the virgin PVDF membrane. Furthermore, the PVDF/GO-lysine membranes surface exhibited good hydrophilicity. The water flux of PVDF/GO-lysine membranes can reach two times of that of the virgin PVDF membrane. And the BSA adsorbed amount on PVDF/GO-lysine surface was decreased to 0.82 mg/cm^2 for PVDF/GO-lysine-8% membrane. Filtration experiment results indicated that the fouling resistance was significantly improved for the PVDF/GO-lysine membranes. As a result, lysine functionalized GO will provide a promising method to fabricate graphene oxide based hybrid membranes with effective antifouling property and hydrophilicity.展开更多
Copolymerization of chitosan selectively grafted by polyethylene glycol was prepared. Chitosan was selectively grafted by monomethoxy polyethylene glycol（mPEG-OH）, which contained a hydroxyl group combining with hex...Copolymerization of chitosan selectively grafted by polyethylene glycol was prepared. Chitosan was selectively grafted by monomethoxy polyethylene glycol（mPEG-OH）, which contained a hydroxyl group combining with hexamethylene diisocyanate（HDI） to form a novel macromonomer namely monomethoxy polyethylene glycol isocyanate（mPEG-NCO） containing a isocyanate group with higher chemical activity in ethyl glyoxalate solution absolutely without water. The selective grafted copolymerization of Chitosan with mPEG-NCO was conducted under heterogeneous conditions as suspension in dimethylformamide. The hydrophilic copolymers of chitosan were prepared by condensation reaction of isocyanate group on mPEG- NCO with hydroxy groups on chitosan chains because amino groups on chitosan chains were protected by complexion formation with copper ions. The effect of reaction condition on the grafting extents was discussed. Swelling properties of mPEG-g-CS were researched. The graft copolymer mPEG-g-CS was characterized by the infrared spectra. The experimental result showed that the copper ions were very effective to protect amino groups from condensation reaction. The swelling degree in water increases with adding of grafting ratio. The maximum swelling degree was up to above 132% when the grafting ratio was about 270%. The graft copolymer can be soluble partially in pure water.展开更多
The hydrophilicity of silicone hydrogels used as soft corneal contact lens plays an important role in wearing comfort. In order to enhance hydrophilicity and protein resistance, silicone hydrogel membranes were modifi...The hydrophilicity of silicone hydrogels used as soft corneal contact lens plays an important role in wearing comfort. In order to enhance hydrophilicity and protein resistance, silicone hydrogel membranes were modified by atmospheric pressure glow discharge plasma （APGDP） induced surface graft polymerization of N-vinyl pyrrolidone （NVP） and poly（oligoethylene glycol methyl ether methacrylate） （PEGMA） in this paper. XPS analysis demonstrated the success of graft polymerization of NVP and PEGMA onto the surface of silicone hydrogel membranes. The hydrophilicity of silicone hydrogels was characterized by the measurement of water contact angle （WCA）. The result showed that NVP grafted silicone hydrogel has the WCA of about 68° and PEGMA grafted silicone hydrogel has the lowest WCA of about 62°, while the pristine silicone hydrogel is hydrophobic with the WCA of about 103°. Protein resistance of silicone hydrogels was investigated by the method of bicinchoninic acid assay using bovine serum albumin （BSA） as a model. It＇s found that the grafted silicone hydrogel has a significant improvement of protein resistance, and PEGMA grafting is more efficient for the reduction of protein adsorption than NVP grafting. The silicone hydrogel membranes grafted with NVP and PEGMA are good candidates of soft corneal contact lenses.展开更多
Three different low-temperature plasma-based methods were used to improve the surface hydrophilicity of polyethy- lene （PE） films, and all the modification processes were carried out by employing an atmospheric pres...Three different low-temperature plasma-based methods were used to improve the surface hydrophilicity of polyethy- lene （PE） films, and all the modification processes were carried out by employing an atmospheric pressure plasma jet （APPJ） system. （a） PE films were directly modified by APPJ using a gas mixture of He and 02. （b） Acrylic acid （AA） was introduced into the system and a polymer acrylic acid （PAA） coating was deposited onto the PE films. （c） AA was grafted onto the PE surface activated by plasma pre-treatment. It was found that the hydrophilicity of the PE films was significantly improved for all the three methods. However, the samples modified by Process （a） showed hydrophobicity recovery after a storage time of 20 days while no significant change was found in samples modified by Process （b） and Process （c）. The Fourier transform infrared spectroscopy （FTIR） results indicated that the most intensive C=O peak was detected on the PE surface modified by Process （c）. According to the X-ray photoelectron spectroscopy （XPS） analysis, the ratios of oxygen-containing polar groups for samples modified by Process （b） and Process （c） were higher than that modified by Process （a）.展开更多
Allyl terminated polyether was used to improve the hydrophilicity of addition-cured room temperature vulcanization silicone rubber. With the increasing of the polyether, both the hydrophilicity and water absorbed of t...Allyl terminated polyether was used to improve the hydrophilicity of addition-cured room temperature vulcanization silicone rubber. With the increasing of the polyether, both the hydrophilicity and water absorbed of the vulcanizates were increased. The mechanical properties were also improved by adding the polyether. The result showed that 1.5wt% of the polyether provided the silicone rubber with proper hydrophilicity.展开更多
This study addressed the effects of treatment with gliding discharge plasma on the surface properties of solid materials, as well as the consequences concerning adherence of a model bacterium. As evaluated by contact ...This study addressed the effects of treatment with gliding discharge plasma on the surface properties of solid materials, as well as the consequences concerning adherence of a model bacterium. As evaluated by contact angles with selected liquids, plasma treatment caused an increase in surface hydrophilicity and in the Lewis acid-base components of the surface energy of all materials tested. These modifications were more marked for low density polyethylene and stainless steel than for polytetrafiuoroethylene. After treatment, the hydrophilicity of the materials remained relatively stable for at least 20 days. Moreover, analysis of the topography of the materials by atomic force microscopy revealed that the roughness of both polymers was reduced by glidarc plasma treatment. As a result of all these modifications, solid substrates were activated towards micro-organisms and the adherence of S. epidermidis, a negatively charged Lewis-base and mildly hydrophilic strain selected as the model, was increased in almost all the cases tested.展开更多
Designing efficient and stable non-precious metal HER(hydrogen evolution reaction)electrocatalysts with high large current density adaptability is significant for industrial application of hydrogen production by water...Designing efficient and stable non-precious metal HER(hydrogen evolution reaction)electrocatalysts with high large current density adaptability is significant for industrial application of hydrogen production by water electrolysis.Herein,a facile strategy was developed to construct a multi-phase Ni3 P-Co_(2)P-(Ni-Co)film with self-supporting hierarchically micro/nano-porous structure by using bubble template method electrodeposition of self-supporting micro-porous Ni Co P film,oxygen-free annealing for phase separation producing Ni_(3)P-Ni-Co_(2)P-Co structure,and acid etching for constructing surface nano-porous structure.The effective active sites for HER was significantly increased due to the hierarchically micro/nano-porous structure,which not only enlarged the surface roughness,but enhanced the bubble detachment by improving the hydrophilicity.Meanwhile,the HER electrolysis durability was improved benefiting from the Ni_(3)P-Co_(2)P phases with high corrosion resistance(especially in acid solution)and the self-supporting film structure without binder.Consequently,the Ni Co P-OA-AE film exhibited high HER catalytic performance,which delivered a current density of 10 m A cm^(-2)at a low overpotential of 42.9 and 39.7 m V in 1 M KOH and 0.5 M H_(2)SO_(4),respectively.It also possessed high long-term electrolysis durability,and the cell voltage of water electrolysis using self-supporting porous Ni Co P-OA-AE||Ir O_(2)-Ta_(2)O_(5) electrolyzer at 500 m A cm^(-2)for 250 h in 0.5 M H_(2)SO_(4 )is only 2.9 V.展开更多
Enhancement of the surface hydrophilicity of biodegradable poly （D,L-lactic acid） （PLA） films is studied. The PLA films were treated by nitrogen plasma （PLA-N2） and nitro- gen/hydrogen plasma （PLA-N2/H2）, resp...Enhancement of the surface hydrophilicity of biodegradable poly （D,L-lactic acid） （PLA） films is studied. The PLA films were treated by nitrogen plasma （PLA-N2） and nitro- gen/hydrogen plasma （PLA-N2/H2）, respectively. The surface properties and microstructure of PLA-N2 and PLA-N2/H2 were studied by static contact angle measurement, surface free energy calculation, X-ray photoelectron spectroscopy （XPS） and atomic force microscopy （AFM）. It is confirmed that the surface hydrophilicity of PLA-N2 and PLA-N2/H2 was higher than that of pristine PLA, and the surface hydrophilicity of PLA-N2 films was better than that of PLA-N2/H2.展开更多
In the present work,hierarchical nanostructured titanium dioxide(TiO2) films were fabricated on Ti-25Nb-3Mo-2Sn-3Zr(TLM) alloy for biomedical applications via one-step anodization process in ethylene glycolbased elect...In the present work,hierarchical nanostructured titanium dioxide(TiO2) films were fabricated on Ti-25Nb-3Mo-2Sn-3Zr(TLM) alloy for biomedical applications via one-step anodization process in ethylene glycolbased electrolyte containing 0.5wt% NH4F.The nanostructured TiO2 films exhibited three distinct types depending on the anodization time:top irregular nanopores(INP)/beneath regular nanopores(RNP),top INP/middle regular nanotubes(RNT)/bottom RNP and top RNT with underlying RNP.The evolution of the nanostructured TiO2 films with anodization time demonstrated that self-organizing nanopores formed at the very beginning and individual nanotubes originated from underlying nanopore dissolution.Furthermore,a modified two-stage self-organizing mechanism was introduced to illustrate the growth of the nanostructured TiO2 films.Compared with TLM titanium alloy matrix,the TiO2 films with special nano-structure hold better hydrophilicity and higher specific surface area,which lays the foundation for their biomedical applications.展开更多
The thermodynamic properties of 135 polychlorinated phenothiazines （PCPTZs） in the standard state are calculated using a combination of quantum mechanical computations performed with the Gaussian 03 program at the B...The thermodynamic properties of 135 polychlorinated phenothiazines （PCPTZs） in the standard state are calculated using a combination of quantum mechanical computations performed with the Gaussian 03 program at the B3LYP/6-311G^＊＊ level, and their octanol-water partition coefficients （logKow） are calculated based on group contributions. The chlorine substitution pattern strongly influenced the thermodynamic properties and hydrophilicity of the compounds. The thermodynamic properties of congeners also depend on the chlorine substitution pattern. The effect of chlorine substitution pattern is quantitatively studied by considering the mmaber and position of Cl atom substitution （Npcs）. The results show that the Npcs model may be used to predict the thermodynamic properties and hydrophilicity for all 135 PCPTZ congeners.展开更多
Hydrogen peroxide( H_2O_2) is applied for surface modification of polyglycolic acid( PGA) fibers in order to enhance the hydrophilicity and cytocompatibility of PGA fibers effectively,and maintain the breaking strengt...Hydrogen peroxide( H_2O_2) is applied for surface modification of polyglycolic acid( PGA) fibers in order to enhance the hydrophilicity and cytocompatibility of PGA fibers effectively,and maintain the breaking strength as the same time. PGA fibers are dipped in H_2O_2 solution a certain time for modification. Scanning electron microscopy( SEM) was used to observe the surface morphology of PGA fibers before and after modification. The varying of PGA macromolecule was examined with Fourier transform infrared spectroscopy( FTIR) analyses. X-ray diffraction( XRD) and differential scanning calorimetry( DSC) analysis showed that crystallinity slightly decreases. Mechanical performance test showed tensile force of modified PGA fiber was increased. The water contact angle test indicated the improving of hydrophilic. A cell proliferation assay showed that fibroblast cells attach and proliferate well on the fibers, which meant the modified fibers possess good cytocompatibility. These results suggest that H_2O_2 surface modification is easy to operate and a advantageous modification method for PGA fibers.展开更多
Thick electrodes can substantially enhance the overall energy density of batteries.However,insufficient wettability of aqueous electrolytes toward electrodes with conventional hydrophobic binders severely limits utili...Thick electrodes can substantially enhance the overall energy density of batteries.However,insufficient wettability of aqueous electrolytes toward electrodes with conventional hydrophobic binders severely limits utilization of active materials with increasing the thickness of electrodes for aqueous batteries,resulting in battery performance deterioration with a reduced capacity.Here,we demonstrate that controlling the hydrophilicity of the thicker electrodes is critical to enhancing the overall energy density of batteries.Hydrophilic binders are synthesized via a simple sulfonation process of conventional polyvinylidene fluoride binders,considering physicochemical properties such as mechanical properties and adhesion.The introduction of abundant sulfonate groups of binders(i)allows fast and sufficient electrolyte wetting,and(ii)improves ionic conduction in thick electrodes,enabling a significant increase in reversible capacities under various current densities.Further,the sulfonated binder effectively inhibits the dissolution of cathode materials in reactive aqueous electrolytes.Overall,our findings significantly enhance the energy density and contribute to the development of practical zinc-ion batteries.展开更多
Poly（vinylidenefluoride-hexafluoropropylene） （PVDF-HFP） nanofiber membranes with improved hydrophilicity and protein fouling resistance via surface graft copolymerization of hydrophilic monomers were prepared. The...Poly（vinylidenefluoride-hexafluoropropylene） （PVDF-HFP） nanofiber membranes with improved hydrophilicity and protein fouling resistance via surface graft copolymerization of hydrophilic monomers were prepared. The surface modification involves atmospheric pressure glow discharge plasma （APGDP） pretreatment followed by graft copolymerization of poly（ethylene glycol） methyl ether methacrylate （PEGMA）. The success of the graft modification with PEGMA on the PVDF-HFP fibrous membrane is ascertained by X-ray photoelectron spectroscopy （XPS） and attenuated total reflectance Fourier transform infrared measurements （ATR-FTIR）. The hydrophilic property of the nanofiber membranes is assessed by water contact angle measurements. The results show that the PEGMA grafted PVDF-HFP nanofiber membrane has a water contact angle of 0° compared with the pristine value of 132°. The protein adsorption was effectively reduced after PEGMA grafting on the PVDF-HFP nanofiber membrane surface. The PEGMA polymer grafting density on the PVDF-HFP membrane surface is measured by the gravimetric method, and the filtration performance is characterized by the measurement of water flux. The results indicate that the water flux of the grafted PVDF-HFP fibrous membrane increases significantly with the increase of the PEGMA grafting density.展开更多
This study deliberately designs and synthesizes three HTMs:m-PhACz,p-PhACz,and p-DPAPCz,incorporating carbazole or diphenylamine groups linked through a benzene ring and functionalized with phosphonic acid groups.Nota...This study deliberately designs and synthesizes three HTMs:m-PhACz,p-PhACz,and p-DPAPCz,incorporating carbazole or diphenylamine groups linked through a benzene ring and functionalized with phosphonic acid groups.Notably,m-PhACz,featuring a carbazole unit and meta-substituted phosphonic acid,exhibits superior hole transport mobility and hydrophilicity,fostering strong intermolecular interaction with indium tin oxide.Consequently,m-PhACz-based devices achieve an outstanding power conversion efficiency of 19.44%,which is much higher than p-PhACz(18.30%)and p-DPAPCz(17.38%)based ones.Our work sets a new benchmark for high-performance OSC fabrication.展开更多
文摘Conventional polyethylene(PE)fibers face limitations in large-scale industrial applications due to their poor thermal stability and inherent hydrophobicity,which restrict processing temperatures and dyeability,especially in blended fabric production.In this research,a one-step ultraviolet(UV)irradiation technology was employed to modify medium molecular weight PE fibers through simultaneous crosslinking and grafting modifications,aiming to enhance their thermal stability and hydrophilicity.The modification employed a cost-effective,UV-initiated crosslinking system consisting of benzophenone(BP)as the photoinitiator and triallyl isocyanurate(TAIC)as the cocrosslinker.Acrylic acid(AA)was selected as the grafting monomer.These modifiers were thoroughly mixed with the PE matrix in a liquid-phase environment,and the mixture was melt-spun into fibers.The resulting fibers were then subjected to UV irradiation,which triggered the crosslinking and grafting reactions.The effects of the mass fraction of each component and irradiation parameters on modification efficacy were systematically investigated,followed by a comprehensive characterization of the modified PE fibers.The modified PE fibers achieved optimal thermal stability under the following conditions:2.0%mass fractions for both BP and TAIC,a UV irradiation intensity of 2000 mW/cm^(2),and an equivalent irradiation time of 60 s.This synergistic modification approach enables the fibers to maintain superior morphological integrity and mechanical performance when exposed to elevated temperatures ranging from 130 to 150℃.Meanwhile,an AA grafting mass fraction of 2.0%maximizes hydrophilicity with minimal impact on other properties,as evidenced by a dramatic reduction in the water contact angle(WCA)from 105.0°(hydrophobic)to 48.4°(hydrophilic).These improvements confirm the effectiveness of the modification strategy in synergistically enhancing both thermal stability and hydrophilicity of PE fibers.
基金supported by the National Key R&D Program of China(No.2021YFC2103600)the National Natural Science Foundation of China(Nos.21878156,21978131,22275085,and 22278224)+2 种基金the Natural Science Foundation of Jiangsu Province(Nos.BK20200089 and BK20200691)the Project of Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD)the State Key Laboratory of Materials-Oriented Chemical Engineering(No.KL21-08).
文摘Constructing multi-dimensional hydrogen bond(H-bond)regulated single-molecule systems with multiemission remains a challenge.Herein,we report the design of a new excited-state intramolecular proton transfer(ESIPT)featured chromophore(HBT-DPI)that shows flexible emission tunability via the multidimensional regulation of intra-and intermolecular H-bonds.The feature of switchable intramolecular Hbonds is induced via incorporating several hydrogen bond acceptors and donors into one single HBT-DPI molecule,allowing the“turn on/off”of ESIPT process by forming isomers with distinct intramolecular Hbonds configurations.In response to different external H-bonding environments,the obtained four types of crystal/cocrystals vary in the contents of isomers and the molecular packing modes,which are mainly guided by the intermolecular H-bonds,exhibiting non-emissive features or emissions ranging from green to orange.Utilizing the feature of intermolecular H-bond guided molecular packing,we demonstrate the utility of this fluorescent material for visualizing hydrophobic/hydrophilic areas on large-scale heterogeneous surfaces of modified poly(1,1-difluoroethylene)(PVDF)membranes and quantitatively estimating the surface hydrophobicity,providing a new approach for hydrophobicity/hydrophilicity monitoring and measurement.Overall,this study represents a new design strategy for constructing multi-dimensional hydrogen bond regulated ESIPT-based fluorescent materials that enable multiple emissions and unique applications.
基金Project(xjj2011096)supported by the Fundamental Research Fund for the Central Universities,ChinaProjects(50901058,51374174)supported by the National Natural Science Foundation of China
文摘Ta-containing TiO2 films with Ta contents of 5%, 20%, 33% （mole fraction） were sol-gel coated on the surface roughened Ti6AI4V alloy by dip coating method for biomedical applications. The Ta-TiO2 films on 1.5 mol/L NaOH-HCI pretreated substrate are adherent, but there are cracks for the sample with 33% Ta. X-ray photoelectron spectroscopy results show that Ti and Ta exist as TiP2 and Ta205 in the film, and A1 element is not detectable. X-ray diffraction and Raman scattering analyses reveal that the addition of Ta decreases crystallization of the films. Potentiodynamic polarization test in a Ca-free Hank＇s balanced solution demonstrates that the coating samples markedly improve the corrosion resistance compared with the polished sample. The addition of Ta impedes UV light-induced hydrophilic conversion of the coating samples. The sample with 20% Ta has enough film integrity and hydrophilic conversion rate, and is expected to possess good biological properties.
基金The National Natural Science Foundation of China(No.50676034)the National High Technology Research and Development Program of China(863 Program)(No.2008AA05Z206)
文摘Porous polyvinylidene fluoride（PVDF）membranes blended with LiCl are prepared through the phase inversion method to obtain a good support layer for air dehumidification.The hydrophilicity of the resulting membrane is evaluated by water contact angle measurements and vapor adsorption tests.The moisture permeation performance of the membrane is measured by permeation tests in terms of total mass transfer coefficients and moisture permeability rates.It is found that water contact angles and water vapor adsorption capacities increase with the increasing LiCl content in the casting solution.As the LiCl content increases,the total mass transfer coefficient increases slightly at a low LiCl content（below 2.5%）and then improves greatly at a high LiCl content（above 2.5%）,whereas the moisture permeation rate increases.The results demonstrate that LiCl can remarkably improve the hydrophilicity of PVDF membranes,and then greatly enhance moisture permeation performance.
文摘Nanowires with anisotropic morphologies have been applied in various scientific and technological areas.It is also widely employed to fabricate nanowires into high-dimensional superstructures(arrays,networks etc.)to overcome the shortcomings of low-dimensional nanowires.However,typical strategies for constructing these superstructures are restricted to complicated and harsh synthetic conditions,not to mention unique 3D structures with advanced properties beyond common superstructures.Herein,we report an unusual network ofα-MnO_(2)nanowires with structure-induced hydrophilicity and conductivity.In the network,the nanowires are interconnected from all directions by nodes,and the 3D network structure is formed from the endless connection of nodes in a node-by-node way.The unique network structure brings about high hydrophilicity and conductivity,both of which are positive factors for an efficient electrocatalyst.Accordingly,the α-MnO_(2) network was tested for electrocatalytic water oxidation and showed significantly enhanced activity compared with isolatedα-MnO_(2)nanowires and 3Dα-MnO_(2)microspheres.This study not only provides a synthetic route toward an advanced network structure but also a new idea for the design of materials for electrochemistry with both efficient mass diffusion and charge transfer.
基金financially supported by the National Natural Science Foundation of China(No.51303028)Test Center of Fuzhou University
文摘Herein, functionalized graphene oxide（GO） was prepared by the covalent functionalization with amino acids（lysine, glycine, glutamic acid and tyrosine） in this study. Zeta potential results demonstrated that covalent functionalization of GO with amino acids was favourable for their homogeneous dispersion in water and organic solvents. Based on the higher absolute value of zeta potential and the better dipersion stability of GO-lysine, the PVDF/GO-lysine hybrid membranes were then prepared via the phase inversion induced by immersion precipitation technique. SEM images showed a better pore diameter and porosity distribution on the PVDF/GO-lysine membrane surface. The zeta potential absolute value of the PVDF/GO-lysine membrane surface was higher than that of the virgin PVDF membrane. Furthermore, the PVDF/GO-lysine membranes surface exhibited good hydrophilicity. The water flux of PVDF/GO-lysine membranes can reach two times of that of the virgin PVDF membrane. And the BSA adsorbed amount on PVDF/GO-lysine surface was decreased to 0.82 mg/cm^2 for PVDF/GO-lysine-8% membrane. Filtration experiment results indicated that the fouling resistance was significantly improved for the PVDF/GO-lysine membranes. As a result, lysine functionalized GO will provide a promising method to fabricate graphene oxide based hybrid membranes with effective antifouling property and hydrophilicity.
基金Funded by the Program of Beijing Municipal Commission of Education
文摘Copolymerization of chitosan selectively grafted by polyethylene glycol was prepared. Chitosan was selectively grafted by monomethoxy polyethylene glycol（mPEG-OH）, which contained a hydroxyl group combining with hexamethylene diisocyanate（HDI） to form a novel macromonomer namely monomethoxy polyethylene glycol isocyanate（mPEG-NCO） containing a isocyanate group with higher chemical activity in ethyl glyoxalate solution absolutely without water. The selective grafted copolymerization of Chitosan with mPEG-NCO was conducted under heterogeneous conditions as suspension in dimethylformamide. The hydrophilic copolymers of chitosan were prepared by condensation reaction of isocyanate group on mPEG- NCO with hydroxy groups on chitosan chains because amino groups on chitosan chains were protected by complexion formation with copper ions. The effect of reaction condition on the grafting extents was discussed. Swelling properties of mPEG-g-CS were researched. The graft copolymer mPEG-g-CS was characterized by the infrared spectra. The experimental result showed that the copper ions were very effective to protect amino groups from condensation reaction. The swelling degree in water increases with adding of grafting ratio. The maximum swelling degree was up to above 132% when the grafting ratio was about 270%. The graft copolymer can be soluble partially in pure water.
基金supported by Hydron Contact Lens Co.,Ltd and National Natural Science Foundation of China (No.50673019)
文摘The hydrophilicity of silicone hydrogels used as soft corneal contact lens plays an important role in wearing comfort. In order to enhance hydrophilicity and protein resistance, silicone hydrogel membranes were modified by atmospheric pressure glow discharge plasma （APGDP） induced surface graft polymerization of N-vinyl pyrrolidone （NVP） and poly（oligoethylene glycol methyl ether methacrylate） （PEGMA） in this paper. XPS analysis demonstrated the success of graft polymerization of NVP and PEGMA onto the surface of silicone hydrogel membranes. The hydrophilicity of silicone hydrogels was characterized by the measurement of water contact angle （WCA）. The result showed that NVP grafted silicone hydrogel has the WCA of about 68° and PEGMA grafted silicone hydrogel has the lowest WCA of about 62°, while the pristine silicone hydrogel is hydrophobic with the WCA of about 103°. Protein resistance of silicone hydrogels was investigated by the method of bicinchoninic acid assay using bovine serum albumin （BSA） as a model. It＇s found that the grafted silicone hydrogel has a significant improvement of protein resistance, and PEGMA grafting is more efficient for the reduction of protein adsorption than NVP grafting. The silicone hydrogel membranes grafted with NVP and PEGMA are good candidates of soft corneal contact lenses.
基金Project supported by the National Natural Science Foundation of China(Grant No.11175157)the Zhejiang Provincial Key Innovation Team,China(Grant No.2012R10038)the 521 Talent Project of Zhejiang Sci-Tech University,China
文摘Three different low-temperature plasma-based methods were used to improve the surface hydrophilicity of polyethy- lene （PE） films, and all the modification processes were carried out by employing an atmospheric pressure plasma jet （APPJ） system. （a） PE films were directly modified by APPJ using a gas mixture of He and 02. （b） Acrylic acid （AA） was introduced into the system and a polymer acrylic acid （PAA） coating was deposited onto the PE films. （c） AA was grafted onto the PE surface activated by plasma pre-treatment. It was found that the hydrophilicity of the PE films was significantly improved for all the three methods. However, the samples modified by Process （a） showed hydrophobicity recovery after a storage time of 20 days while no significant change was found in samples modified by Process （b） and Process （c）. The Fourier transform infrared spectroscopy （FTIR） results indicated that the most intensive C=O peak was detected on the PE surface modified by Process （c）. According to the X-ray photoelectron spectroscopy （XPS） analysis, the ratios of oxygen-containing polar groups for samples modified by Process （b） and Process （c） were higher than that modified by Process （a）.
文摘Allyl terminated polyether was used to improve the hydrophilicity of addition-cured room temperature vulcanization silicone rubber. With the increasing of the polyether, both the hydrophilicity and water absorbed of the vulcanizates were increased. The mechanical properties were also improved by adding the polyether. The result showed that 1.5wt% of the polyether provided the silicone rubber with proper hydrophilicity.
文摘This study addressed the effects of treatment with gliding discharge plasma on the surface properties of solid materials, as well as the consequences concerning adherence of a model bacterium. As evaluated by contact angles with selected liquids, plasma treatment caused an increase in surface hydrophilicity and in the Lewis acid-base components of the surface energy of all materials tested. These modifications were more marked for low density polyethylene and stainless steel than for polytetrafiuoroethylene. After treatment, the hydrophilicity of the materials remained relatively stable for at least 20 days. Moreover, analysis of the topography of the materials by atomic force microscopy revealed that the roughness of both polymers was reduced by glidarc plasma treatment. As a result of all these modifications, solid substrates were activated towards micro-organisms and the adherence of S. epidermidis, a negatively charged Lewis-base and mildly hydrophilic strain selected as the model, was increased in almost all the cases tested.
基金supported by the National Natural Science Foundation of China(Nos.51804023 and 51874020)the Fundamental Research Funds for the Central Universities(Nos.FRF-TP-18-007A1)+1 种基金the China Postdoctoral Science Foundation(Nos.2019M650489 and 2019T120046)Taishan Scholars Program(No.tsqn201909087)。
文摘Designing efficient and stable non-precious metal HER(hydrogen evolution reaction)electrocatalysts with high large current density adaptability is significant for industrial application of hydrogen production by water electrolysis.Herein,a facile strategy was developed to construct a multi-phase Ni3 P-Co_(2)P-(Ni-Co)film with self-supporting hierarchically micro/nano-porous structure by using bubble template method electrodeposition of self-supporting micro-porous Ni Co P film,oxygen-free annealing for phase separation producing Ni_(3)P-Ni-Co_(2)P-Co structure,and acid etching for constructing surface nano-porous structure.The effective active sites for HER was significantly increased due to the hierarchically micro/nano-porous structure,which not only enlarged the surface roughness,but enhanced the bubble detachment by improving the hydrophilicity.Meanwhile,the HER electrolysis durability was improved benefiting from the Ni_(3)P-Co_(2)P phases with high corrosion resistance(especially in acid solution)and the self-supporting film structure without binder.Consequently,the Ni Co P-OA-AE film exhibited high HER catalytic performance,which delivered a current density of 10 m A cm^(-2)at a low overpotential of 42.9 and 39.7 m V in 1 M KOH and 0.5 M H_(2)SO_(4),respectively.It also possessed high long-term electrolysis durability,and the cell voltage of water electrolysis using self-supporting porous Ni Co P-OA-AE||Ir O_(2)-Ta_(2)O_(5) electrolyzer at 500 m A cm^(-2)for 250 h in 0.5 M H_(2)SO_(4 )is only 2.9 V.
基金supported by the Fundamental Research Funds for the Central Universities (Nos. GK200901023, GK201004001)
文摘Enhancement of the surface hydrophilicity of biodegradable poly （D,L-lactic acid） （PLA） films is studied. The PLA films were treated by nitrogen plasma （PLA-N2） and nitro- gen/hydrogen plasma （PLA-N2/H2）, respectively. The surface properties and microstructure of PLA-N2 and PLA-N2/H2 were studied by static contact angle measurement, surface free energy calculation, X-ray photoelectron spectroscopy （XPS） and atomic force microscopy （AFM）. It is confirmed that the surface hydrophilicity of PLA-N2 and PLA-N2/H2 was higher than that of pristine PLA, and the surface hydrophilicity of PLA-N2 films was better than that of PLA-N2/H2.
基金Supported by the National Natural Science Foundation of China(No.51372169)Natural Science Foundation of Tianjin(No.11JCZDJC17300)
文摘In the present work,hierarchical nanostructured titanium dioxide(TiO2) films were fabricated on Ti-25Nb-3Mo-2Sn-3Zr(TLM) alloy for biomedical applications via one-step anodization process in ethylene glycolbased electrolyte containing 0.5wt% NH4F.The nanostructured TiO2 films exhibited three distinct types depending on the anodization time:top irregular nanopores(INP)/beneath regular nanopores(RNP),top INP/middle regular nanotubes(RNT)/bottom RNP and top RNT with underlying RNP.The evolution of the nanostructured TiO2 films with anodization time demonstrated that self-organizing nanopores formed at the very beginning and individual nanotubes originated from underlying nanopore dissolution.Furthermore,a modified two-stage self-organizing mechanism was introduced to illustrate the growth of the nanostructured TiO2 films.Compared with TLM titanium alloy matrix,the TiO2 films with special nano-structure hold better hydrophilicity and higher specific surface area,which lays the foundation for their biomedical applications.
文摘The thermodynamic properties of 135 polychlorinated phenothiazines （PCPTZs） in the standard state are calculated using a combination of quantum mechanical computations performed with the Gaussian 03 program at the B3LYP/6-311G^＊＊ level, and their octanol-water partition coefficients （logKow） are calculated based on group contributions. The chlorine substitution pattern strongly influenced the thermodynamic properties and hydrophilicity of the compounds. The thermodynamic properties of congeners also depend on the chlorine substitution pattern. The effect of chlorine substitution pattern is quantitatively studied by considering the mmaber and position of Cl atom substitution （Npcs）. The results show that the Npcs model may be used to predict the thermodynamic properties and hydrophilicity for all 135 PCPTZ congeners.
基金Shanghai Science and Technical Committee,China(No.10411953300)State Key Laboratory for Modification of Chemical Fibers and Polymer Materials,China(No.LZ0902)Minhang District Industry-Study-Research Cooperation,China(No.2012MH202)
文摘Hydrogen peroxide( H_2O_2) is applied for surface modification of polyglycolic acid( PGA) fibers in order to enhance the hydrophilicity and cytocompatibility of PGA fibers effectively,and maintain the breaking strength as the same time. PGA fibers are dipped in H_2O_2 solution a certain time for modification. Scanning electron microscopy( SEM) was used to observe the surface morphology of PGA fibers before and after modification. The varying of PGA macromolecule was examined with Fourier transform infrared spectroscopy( FTIR) analyses. X-ray diffraction( XRD) and differential scanning calorimetry( DSC) analysis showed that crystallinity slightly decreases. Mechanical performance test showed tensile force of modified PGA fiber was increased. The water contact angle test indicated the improving of hydrophilic. A cell proliferation assay showed that fibroblast cells attach and proliferate well on the fibers, which meant the modified fibers possess good cytocompatibility. These results suggest that H_2O_2 surface modification is easy to operate and a advantageous modification method for PGA fibers.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.2022R1F1A1070168,2020R1C1C1004322)the Korea Institute of Industrial Technology as Development of core technology for smart wellness care based on cleaner production process technology(KITECH-PEH23030)+1 种基金supported by the Renewable Surplus Sector Coupling Technology Program of the Korea Institute of Energy Technology Evaluation and Planning(KETEP)granted financial resource from the Ministry of Trade,Industry&Energy,Republic of Korea(No.20226210100050)the National Research Council of Science&Technology(NST)grant by the Korea government(MSIT)(No.CPS21141-100)。
文摘Thick electrodes can substantially enhance the overall energy density of batteries.However,insufficient wettability of aqueous electrolytes toward electrodes with conventional hydrophobic binders severely limits utilization of active materials with increasing the thickness of electrodes for aqueous batteries,resulting in battery performance deterioration with a reduced capacity.Here,we demonstrate that controlling the hydrophilicity of the thicker electrodes is critical to enhancing the overall energy density of batteries.Hydrophilic binders are synthesized via a simple sulfonation process of conventional polyvinylidene fluoride binders,considering physicochemical properties such as mechanical properties and adhesion.The introduction of abundant sulfonate groups of binders(i)allows fast and sufficient electrolyte wetting,and(ii)improves ionic conduction in thick electrodes,enabling a significant increase in reversible capacities under various current densities.Further,the sulfonated binder effectively inhibits the dissolution of cathode materials in reactive aqueous electrolytes.Overall,our findings significantly enhance the energy density and contribute to the development of practical zinc-ion batteries.
基金supported by the National Natural Science Foundation of China(No.50673019).
文摘Poly（vinylidenefluoride-hexafluoropropylene） （PVDF-HFP） nanofiber membranes with improved hydrophilicity and protein fouling resistance via surface graft copolymerization of hydrophilic monomers were prepared. The surface modification involves atmospheric pressure glow discharge plasma （APGDP） pretreatment followed by graft copolymerization of poly（ethylene glycol） methyl ether methacrylate （PEGMA）. The success of the graft modification with PEGMA on the PVDF-HFP fibrous membrane is ascertained by X-ray photoelectron spectroscopy （XPS） and attenuated total reflectance Fourier transform infrared measurements （ATR-FTIR）. The hydrophilic property of the nanofiber membranes is assessed by water contact angle measurements. The results show that the PEGMA grafted PVDF-HFP nanofiber membrane has a water contact angle of 0° compared with the pristine value of 132°. The protein adsorption was effectively reduced after PEGMA grafting on the PVDF-HFP nanofiber membrane surface. The PEGMA polymer grafting density on the PVDF-HFP membrane surface is measured by the gravimetric method, and the filtration performance is characterized by the measurement of water flux. The results indicate that the water flux of the grafted PVDF-HFP fibrous membrane increases significantly with the increase of the PEGMA grafting density.
基金supported by the National Natural Science Foundation of China(52173174,51933001 and 22109080)the Natural Science Foundation of Shandong Province(ZR2022YQ45 and ZR2023QB013)+1 种基金the Taishan Scholars Program(tstp20221121 and tsqnz20221134)the State Key Laboratory of Bio-Fibers and Eco-Textiles(Qingdao University)(RZ2200002821)。
文摘This study deliberately designs and synthesizes three HTMs:m-PhACz,p-PhACz,and p-DPAPCz,incorporating carbazole or diphenylamine groups linked through a benzene ring and functionalized with phosphonic acid groups.Notably,m-PhACz,featuring a carbazole unit and meta-substituted phosphonic acid,exhibits superior hole transport mobility and hydrophilicity,fostering strong intermolecular interaction with indium tin oxide.Consequently,m-PhACz-based devices achieve an outstanding power conversion efficiency of 19.44%,which is much higher than p-PhACz(18.30%)and p-DPAPCz(17.38%)based ones.Our work sets a new benchmark for high-performance OSC fabrication.
