Taking the second member of the Xujiahe Formation of the Upper Triassic in the Xinchang structural belt as an example,based on data such as logging,production,seismic interpretation and test,a systematic analysis was ...Taking the second member of the Xujiahe Formation of the Upper Triassic in the Xinchang structural belt as an example,based on data such as logging,production,seismic interpretation and test,a systematic analysis was conducted on the structural characteristics and evolution,reservoir diagenesis and densification processes,and types and stages of faults/fractures,and revealing the multi-stage and multi-factor dynamic coupled enrichment mechanisms of tight gas reservoirs.(1)In the early Yanshan period,the paleo-structural traps were formed with low-medium maturity hydrocarbons accumulating in structural highs driven by buoyancy since reservoirs were not fully densified in this stage,demonstrating paleo-structure control on traps and early hydrocarbon accumulation.(2)In the middle-late Yanshan period,the source rocks became mature to generate and expel a large quantity of hydrocarbons.Grain size and type of sandstone controlled the time of reservoir densification,which restricted the scale of hydrocarbon charging,allowing for only a small-scale migration through sand bodies near the fault/fracture or less-densified matrix reservoirs.(3)During the Himalayan period,the source rocks reached overmaturity,and the residual oil cracking gas was efficiently transported along the late-stage faults/fractures.Wells with high production capacity were mainly located in Type I and II fault/fracture zones comprising the late-stage north-south trending fourth-order faults and the late-stage fractures.The productivity of the wells was controlled by the transformation of the late-stage faults/fractures.(4)The Xinchang structural belt underwent three stages of tectonic evolution,two stages of reservoir formation,and three stages of fault/fractures development.Hydrocarbons mainly accumulated in the paleo-structure highs.After reservoir densification and late fault/fracture adjustment,a complex gas-water distribution pattern was formed.Thus,it is summarized as the model of“near-source and low-abundance hydrocarbon charging in the early stage,and differential enrichment of natural gas under the joint control of fault-fold-fracture complex,high-quality reservoirs and structural highs in the late stage”.Faults/fractures with well-coupled fault-fold-fracture-pore are favorable exploration targets with high exploration effectiveness.展开更多
The internal pressure within fission gas bubbles(FGBs)in irradiated nuclear fuels drives mechanical interactions with the surrounding fuel skeleton.To investigate the micromechanical stress fields in irradiated nuclea...The internal pressure within fission gas bubbles(FGBs)in irradiated nuclear fuels drives mechanical interactions with the surrounding fuel skeleton.To investigate the micromechanical stress fields in irradiated nuclear fuels containing pressurized FGBs,a mechanical constitutive model for the equivalent solid of FGBs was developed and validated.This model was based on the modified Van der Waals equation,incorporating the effects of surface tension.Using this model,the micromechanical fields in irradiated U-10Mo fuels with randomly distributed FGBs were calculated during uniaxial tensile testing via the finite element(FE)method.The macroscopic elastic constants of the irradiated U-10Mo fuels were then derived using homogenization theory,and the influences of bubble pressure,bubble size,and porosity on these constants were examined.Results show that adjacent FGBs exhibit mechanical interactions,which leads to distinct stress concentrations in the surrounding fuel skeleton.The macroscopic elastic constants of irradiated U-10Mo fuels decrease with increasing the macroscopic porosity,which can be quantitatively described by the Mori-Tanaka model.In contrast,bubble pressure and size have negligible effects on these constants.展开更多
Accurate assessment of coal brittleness is crucial in the design of coal seam drilling and underground coal mining operations.This study proposes a method for evaluating the brittleness of gas-bearing coal based on a ...Accurate assessment of coal brittleness is crucial in the design of coal seam drilling and underground coal mining operations.This study proposes a method for evaluating the brittleness of gas-bearing coal based on a statistical damage constitutive model and energy evolution mechanisms.Initially,integrating the principle of effective stress and the Hoek-Brown criterion,a statistical damage constitutive model for gas-bearing coal is established and validated through triaxial compression tests under different gas pressures to verify its accuracy and applicability.Subsequently,employing energy evolution mechanism,two energy characteristic parameters(elastic energy proportion and dissipated energy proportion)are analyzed.Based on the damage stress thresholds,the damage evolution characteristics of gas bearing coal were explored.Finally,by integrating energy characteristic parameters with damage parameters,a novel brittleness index is proposed.The results demonstrate that the theoretical curves derived from the statistical damage constitutive model closely align with the test curves,accurately reflecting the stress−strain characteristics of gas-bearing coal and revealing the stress drop and softening characteristics of coal in the post-peak stage.The shape parameter and scale parameter represent the brittleness and macroscopic strength of the coal,respectively.As gas pressure increases from 1 to 5 MPa,the shape parameter and the scale parameter decrease by 22.18%and 60.45%,respectively,indicating a reduction in both brittleness and strength of the coal.Parameters such as maximum damage rate and peak elastic energy storage limit positively correlate with coal brittleness.The brittleness index effectively captures the brittleness characteristics and reveals a decrease in brittleness and an increase in sensitivity to plastic deformation under higher gas pressure conditions.展开更多
Based on petroleum exploration and new progress of oil and gas geology study in the Qiongdongnan Basin,combined with seismic,logging,drilling,core,sidewall coring,geochemistry data,a systematic study is conducted on t...Based on petroleum exploration and new progress of oil and gas geology study in the Qiongdongnan Basin,combined with seismic,logging,drilling,core,sidewall coring,geochemistry data,a systematic study is conducted on the source,reservoir-cap conditions,trap types,migration and accumulation characteristics,enrichment mechanisms,and reservoir formation models of ultra-deep water and ultra-shallow natural gas,taking the Lingshui 36-1 gas field as an example.(1)The genetic types of the ultra-deep water and ultra-shallow natural gas in the Qiongdongnan Basin include thermogenic gas and biogenic gas,and dominated by thermogenic gas.(2)The reservoirs are mainly composed of the Quaternary deep-water submarine fan sandstone.(3)The types of cap rocks include deep-sea mudstone,mass transport deposits mudstone,and hydrate-bearing formations.(4)The types of traps are mainly lithological,and also include structural-lithological traps.(5)The migration channels include vertical transport channels such as faults,gas chimneys,fracture zones,and lateral transport layers such as large sand bodies and unconformity surfaces,forming a single or composite transport framework.A new natural gas accumulation model is proposed for ultra-deep water and ultra-shallow layers,that is,dual source hydrocarbon supply,gas chimney and submarine fan composite migration,deep-sea mudstone-mass transport deposits mudstone-hydrate-bearing strata ternary sealing,late dynamic accumulation,and large-scale enrichment at ridges.The new understanding obtained from the research has reference and enlightening significance for the next step of deepwater and ultra-shallow layers,as well as oil and gas exploration in related fields or regions.展开更多
Salt caverns are widely used for energy storage.During gas storage,the internal gas pressure fluctuates cyclically in response to energy demand,making it essential to assess how these pressure variations affect rock d...Salt caverns are widely used for energy storage.During gas storage,the internal gas pressure fluctuates cyclically in response to energy demand,making it essential to assess how these pressure variations affect rock deformation.In this study,experiments were conducted under different cyclic gas pressure conditions to investigate this effect.The findings indicate that(1)the deformation process of salt rock can be segmented into three stages:the deceleration stage,the steady-state stage,and the acceleration stage.(2)When the axial pressure remains constant,both axial and radial deformations exhibit a stepwise increasing trend in response to cyclic gas pressure variations.Similarly,under axial graded loading,the deformations also demonstrate a progressive rise.By analyzing the deformation differences and model coefficient fluctuations within a single gas pressure cycle,it is found that radial deformation is higher sensitive to changes in cyclic gas pressure.(3)The axial deformation shows a stepwise increase,and the radial deformation showed a cyclic change with changing gas pressure.Therefore,the cyclic gas pressure influence factor α,axial loading influence factor β,and state variable σ^(*)are introduced to develop a viscoplastic ontological model that accounts for the impacts of cyclic gas pressure,confining pressure and axial stress.Validated by the deformation data,the new model can better fit both the axial deformation and the radial deformation of the three stages and has strong applicability and accuracy by changing only fewer parameters.The state variable rate shows the same stage as the deformation rate and residual strain of salt rock,which can better reflect the internal hardening of salt rock.展开更多
To address the issues of single warning indicators,fixed thresholds,and insufficient adaptability in coal and gas outburst early warning models,this study proposes a dynamic early warning model for gas outbursts based...To address the issues of single warning indicators,fixed thresholds,and insufficient adaptability in coal and gas outburst early warning models,this study proposes a dynamic early warning model for gas outbursts based on adaptive fractal dimension characterization.By analyzing the nonlinear characteristics of gas concentration data,an adaptive window fractal analysis method is introduced.Combined with boxcounting dimension and variation of box dimension metrics,a cross-scale dynamic warning model for disaster prevention is established.The implementation involves three key phases:First,wavelet denoising and interpolation methods are employed for raw data preprocessing,followed by validation of fractal characteristics.Second,an adaptive window cross-scale fractal dimension method is proposed to calculate the box-counting dimension of gas concentration,enabling effective capture of multi-scale complex features.Finally,dynamic threshold partitioning is achieved through membership functions and the 3σprinciple,establishing a graded classification standard for the mine gas disaster(MGD)index.Validated through engineering applications at Shoushan#1 Coal Mine in Henan Province,the results demonstrate that the adaptive window fractal dimension curve exhibits significantly enhanced fluctuation characteristics compared to fixed window methods,with local feature detection capability improved and warning accuracy reaching 86.9%.The research reveals that this model effectively resolves the limitations of traditional methods in capturing local features and dependency on subjective thresholds through multiindicator fusion and threshold optimization,providing both theoretical foundation and practical tool for coal mine gas outburst early warning.展开更多
Accurate prediction of coal and gas outburst(CGO)hazards is paramount in gas disaster prevention and control.This paper endeavors to overcome the constraints posed by traditional prediction indexes when dealing with C...Accurate prediction of coal and gas outburst(CGO)hazards is paramount in gas disaster prevention and control.This paper endeavors to overcome the constraints posed by traditional prediction indexes when dealing with CGO incidents under low gas pressure conditions.In pursuit of this objective,we have studied and established a mechanical model of the working face under abnormal stress and the excitation energy conditions of CGO,and proposed a method for predicting the risk of CGO under abnormal stress.On site application verification shows that when a strong outburst hazard level prediction is issued,there is a high possibility of outburst disasters occurring.In one of the three locations where we predicted strong outburst hazards,a small outburst occurred,and the accuracy of the prediction was higher than the traditional drilling cuttings index S and drilling cuttings gas desorption index q.Finally,we discuss the mechanism of CGO under the action of stress anomalies.Based on the analysis of stress distribution changes and energy accumulation characteristics of coal under abnormal stress,this article believes that the increase in outburst risk caused by high stress abnormal gradient is mainly due to two reasons:(1)The high stress abnormal gradient leads to an increase in the plastic zone of the coal seam.After the working face advances,it indirectly leads to an increase in the gas expansion energy that can be released from the coal seam before reaching a new stress equilibrium.(2)Abnormal stress leads to increased peak stress of coal body in front of working face.When coal body in elastic area transforms to plastic area,its failure speed is accelerated,which induces accelerated gas desorption and aggravates the risk of outburst.展开更多
In recent years,large language models(LLMs)have demonstrated immense potential in practical applications to enhance work efficiency and decision-making capabilities.However,specialized LLMs in the oil and gas engineer...In recent years,large language models(LLMs)have demonstrated immense potential in practical applications to enhance work efficiency and decision-making capabilities.However,specialized LLMs in the oil and gas engineering area are rarely developed.To aid in exploring and developing deep and ultra-deep unconventional reservoirs,there is a call for a personalized LLM on oil-and gas-related rock mechanics,which may handle complex professional data and make intelligent predictions and decisions.To that end,herein,we overview general and industry-specific LLMs.Then,a systematic workflow is proposed for building this domain-specific LLM for oil and gas engineering,including data collection and processing,model construction and training,model validation,and implementation in the specific domain.Moreover,three application scenarios are investigated:knowledge extraction from textural resources,field operation with multidisciplinary integration,and intelligent decision assistance.Finally,several challenges in developing this domain-specific LLM are highlighted.Our key findings are that geological surveys,laboratory experiments,field tests,and numerical simulations form the four original sources of rock mechanics data.Those data must flow through collection,storage,processing,and governance before being fed into LLM training.This domain-specific LLM can be trained by fine-tuning a general open-source LLM with professional data and constraints such as rock mechanics datasets and principles.The LLM can then follow the commonly used training and validation processes before being implemented in the oil and gas field.However,there are three primary challenges in building this domain-specific LLM:data standardization,data security and access,and striking a compromise between physics and data when building the model structure.Some of these challenges are administrative rather than technical,and overcoming those requires close collaboration between the different interested parties and various professional practitioners.展开更多
This study systematically reviews the development history and key technological breakthroughs of large gas fields in the Ordos Basin,and summarizes the development models of three gas reservoir types,low-permeability ...This study systematically reviews the development history and key technological breakthroughs of large gas fields in the Ordos Basin,and summarizes the development models of three gas reservoir types,low-permeability carbonate,low-permeability sandstone and tight sandstone,as well as the progress in deep coal-rock gas development.The current challenges and future development directions are also discussed.Mature development models have been formed for the three representative types of gas reservoirs in the Ordos Basin:(1)Low-permeability carbonate reservoir development model featuring groove fine-scale characterization and three-dimensional vertical succession between Upper and Lower Paleozoic formations.(2)Low-permeability sandstone reservoir development model emphasizing horizontal well pressure-depletion production and vertical well pressure-controlled production.(3)Tight sandstone gas reservoir development model focusing on single-well productivity enhancement and well placement optimization.In deep coal-rock gas development,significant progress has been achieved in reservoir evaluation,sweet spot prediction,and geosteering of horizontal wells.The three types of reservoirs have entered the mid-to-late stages of the development,when the main challenge lies in accurately characterizing residual gas,evaluating secondary gas-bearing layers,and developing precise potential-tapping strategies.In contrast,for the early-stage development of deep coal-rock gas,continuous technological upgrades and cost reduction are essential to achieving economically viable large-scale development.Four key directions of future research and technological breakthroughs are proposed:(1)Utilizing dual-porosity(fracture-matrix)modeling techniques in low-permeability carbonate reservoirs to delineate the volume and distribution of remaining gas in secondary pay zones,supporting well pattern optimization and production enhancement of existing wells.(2)Integrating well-log and seismic data to characterize reservoir spatial distribution of successive strata,enhancing drilling success rates in low-permeability sandstone reservoirs.(3)Utilizing the advantages of horizontal wells to penetrate effective reservoirs laterally,achieving meter-scale quantification of small-scale single sand bodies in tight gas reservoirs,and applying high-resolution 3D geological models to clarify the distribution of remaining gas and guide well placement optimization.(4)Further strengthening the evaluation of deep coal-rock gas in terms of resource potential,well type and pattern,reservoir stimulation,single-well performance,and economic viability.展开更多
A three-dimensional numerical model of laser-arc hybrid plasma for aluminum alloy fillet joints is developed in this study.This mod-el accounts for the geometric complexity of fillet joints,the physical properties of ...A three-dimensional numerical model of laser-arc hybrid plasma for aluminum alloy fillet joints is developed in this study.This mod-el accounts for the geometric complexity of fillet joints,the physical properties of shielding gases with varying He-Ar ratios,and the coupling between arc plasma and laser-induced metal plume.The accuracy of the model is validated using a high-speed camera.The effects of varying He contents in the shielding gas on both the temperature and flow velocity of hybrid plasma,as well as the distribu-tion of laser-induced metal vapor mass,were investigated separately.The maximum temperature and size of arc plasma decrease as the He volume ratio increases,the arc distribution becomes more concentrated,and its flow velocity initially decreases and then sharply increases.At high helium content,both the flow velocity of hybrid plasma and metal vapor are high,the metal vapor is con-centrated on the right side of keyhole,and its flow appears chaotic.The flow state of arc plasma is most stable when the shielding gas consists of 50%He+50%Ar.展开更多
The black shales of Wufeng and Longmaxi Formation(Late Ordovician-Early Silurian period)in Sichuan Basin are the main strata for marine shale gas exploration,which have a yearly shale gas production of 228×10^(8)...The black shales of Wufeng and Longmaxi Formation(Late Ordovician-Early Silurian period)in Sichuan Basin are the main strata for marine shale gas exploration,which have a yearly shale gas production of 228×10^(8)m^(3)and cumulative shale gas production of 919×10^(8)m^(3).According to the lithological and biological features,filling sequences,sedimentary structures and lab analysis,the authors divided the Wufeng/Guanyinqiao and Longmaxi Formations into shore,tidal flat,shoal,shallow water shelf and deep water shelf facies,and confirmed that a shallow water deposition between the two sets of shales.Although both Formations contain similar shales,their formation mechanisms differ.During the deposition of Wufeng shale,influenced by the Caledonian Movement,the Central Sichuan and Guizhou Uplifts led to the transformation of the Sichuan Basin into a back-bulge basin.Coinstantaneous volcanic activity provided significant nutrients,contributing to the deposition of Wufeng Formation black shales.In contrast,during the deposition of Longmaxi shale,collisions caused basement subsidence,melting glaciers raised sea levels,and renewed volcanic activity provided additional nutrients,leading to Longmaxi Formation black shale accumulation.Considering the basic sedimentary geology and shale gas characteristics,areas such as Suijiang-Leibo-Daguan,Luzhou-Zigong,Weirong-Yongchuan,and Nanchuan-Dingshan are identified as key prospects for future shale gas exploration in the Wufeng-Longmaxi Formations.展开更多
A novel shear damage model based on homogenization theory and a modified Mohr-Coulomb criterion is proposed to predict the full deformation process of gas hydrate-bearing sediments(GHBSs)during shearing by analyzing m...A novel shear damage model based on homogenization theory and a modified Mohr-Coulomb criterion is proposed to predict the full deformation process of gas hydrate-bearing sediments(GHBSs)during shearing by analyzing micro-mechanisms of shear deformation and failure characteristics.Then,the physical significance of the model's parameters is explored.Finally,the damage evolution and shear stress partition inside GHBSs during the shearing process are analyzed in detail.The results show that model parameters have clear physical meaning,and the shear damage model is capable of reflecting the nonlinear deformation and strain softening characteristics of GHBSs due to its ability to better describe the damage evolution and shear stress partition mechanisms inside GHBSs during the shearing process.Comparisons of experimental and theoretical results show that the global performance of the novel shear damage model is satisfactory.The model is expected to be widely adopted to analyze submarine landslide instability due to hydrate dissociation.展开更多
We investigated the effect of microscopic distribution modes of hydrates in porous sediments, and the saturation of hydrates and free gas on the elastic properties of saturated sediments. We simulated the propagation ...We investigated the effect of microscopic distribution modes of hydrates in porous sediments, and the saturation of hydrates and free gas on the elastic properties of saturated sediments. We simulated the propagation of seismic waves in gas hydrate-bearing sediments beneath the seafloor, and obtained the common receiver gathers of compressional waves（P-waves） and shear waves（S-waves）. The numerical results suggest that the interface between sediments containing gas hydrates and free gas produces a large-amplitude bottomsimulating reflector. The analysis of multicomponent common receiver data suggests that ocean-bottom seismometers receive the converted waves of upgoing P- and S-waves, which increases the complexity of the wavefield record.展开更多
We discuss the feasibility of using controlled-source electromagnetic （CSEM） in the frequency domain for prospecting marine gas hydrates. Based on the Ocean Drilling Program （ODP） Leg 164 log data, we have establi...We discuss the feasibility of using controlled-source electromagnetic （CSEM） in the frequency domain for prospecting marine gas hydrates. Based on the Ocean Drilling Program （ODP） Leg 164 log data, we have established several 1-D resistivity models which have different gas hydrate concentrations. Meanwhile, we analyzed the electromagnetic response of marine gas hydrates in the frequency domain based on these models. We also studied the relationship between electrical field magnitude or phase and parameters such as receiver-transmitter distance and frequency. Our numerical modeling results provide us with a quantitative reference for exploration and resource evaluation of marine gas hydrates.展开更多
This paper briefs the configuration and performance of large size gas turbines and their composed combined cycle power plants designed and produced by four large renown gas turbine manufacturing firms in the world, pr...This paper briefs the configuration and performance of large size gas turbines and their composed combined cycle power plants designed and produced by four large renown gas turbine manufacturing firms in the world, providing reference for the relevant sectors and enterprises in importing advanced gas turbines and technologies.展开更多
Based on the analysis of Upper Paleozoic source rocks, source-reservoir-caprock assemblage, and gas accumulation characteristics in the Ordos Basin, the gas accumulation geological model of total petroleum system is d...Based on the analysis of Upper Paleozoic source rocks, source-reservoir-caprock assemblage, and gas accumulation characteristics in the Ordos Basin, the gas accumulation geological model of total petroleum system is determined. Then, taking the Carboniferous Benxi Formation and the Permian Taiyuan Formation and Shanxi Formation as examples, the main controlling factors of gas accumulation and enrichment are discussed, and the gas enrichment models of total petroleum system are established. The results show that the source rocks, faults and tight reservoirs and their mutual coupling relations control the distribution and enrichment of gas. Specifically, the distribution and hydrocarbon generation capacity of source rocks control the enrichment degree and distribution range of retained shale gas and tight gas in the source. The coupling between the hydrocarbon generation capacity of source rocks and the physical properties of tight reservoirs controls the distribution and sweet spot development of near-source tight gas in the basin center. The far-source tight gas in the basin margin is mainly controlled by the distribution of faults, and the distribution of inner-source, near-source and far-source gas is adjusted and reformed by faults. Generally, the Upper Paleozoic gas in the Ordos Basin is recognized in four enrichment models: inner-source coalbed gas and shale gas, inner-source tight sandstone gas, near-source tight gas, and far-source fault-transported gas. In the Ordos Basin, inner-source tight gas and near-source tight gas are the current focuses of exploration, and inner-source coalbed gas and shale gas and far-source gas will be important potential targets in the future.展开更多
The environmental risks associated with casing deformation in unconventional(shale)gas wells positioned in abutment pillars of longwall mines is a concern to many in the mining and gas well industry.With the recent in...The environmental risks associated with casing deformation in unconventional(shale)gas wells positioned in abutment pillars of longwall mines is a concern to many in the mining and gas well industry.With the recent interest in shale exploration and the proximity to longwall mining in Southwestern Pennsylvania,the risk to mine workers could be catastrophic as fractures in surrounding strata create pathways for transport of leaked gases.Hence,this research by the National Institute for Occupational Safety and Health(NIOSH)presents an analytical model of the gas transport through fractures in a low permeable stratum.The derived equations are used to conduct parametric studies of specific transport conditions to understand the influence of stratum geology,fracture lengths,and the leaked gas properties on subsurface transport.The results indicated that the prediction that the subsurface gas flux decreases with an increase in fracture length is specifically for a non-gassy stratum.The sub-transport trend could be significantly impacted by the stratum gas generation rate within specific fracture lengths,which emphasized the importance of the stratum geology.These findings provide new insights for improved understanding of subsurface gas transport to ensure mine safety.展开更多
A proposed concept of outburst initiation examines the release of a large amount of gas from coal seams resulted from disintegrating thermodynamically unstable coal organic matter(COM).A coal microstructure is assumed...A proposed concept of outburst initiation examines the release of a large amount of gas from coal seams resulted from disintegrating thermodynamically unstable coal organic matter(COM).A coal microstructure is assumed to getting unstable due to shear component appearance triggered by mining operations and tectonic activities considered as the primary factor while COM disintegration under the impact of weak electric fields can be defined as a secondary one.The energy of elastic deformations stored in the coal microstructure activates chemical reactions to tilt the energy balance in a“coal–gas”system.Based on this concept a mathematical model of a gas flow in the coal where porosity and permeability are changed due to chemical reactions has been developed.Using this model we calculated gas pressure changes in the pores initiated by gas release near the working face till satisfying force and energy criteria of outburst.The simulation results demonstrated forming overpressure zone in the area of intensive gas release with enhanced porosity and permeability.The calculated outburst parameters are well combined with those evaluated by field measurements.展开更多
Improving the absorbed gas to active desorption and seepage and delaying gas drainage attenuation are considered as key methods for increasing drainage efficiency and gas output.According to the solid mechanics theory...Improving the absorbed gas to active desorption and seepage and delaying gas drainage attenuation are considered as key methods for increasing drainage efficiency and gas output.According to the solid mechanics theory,the nonlinear Darcy seepage theory and thermodynamics,the heat-fluid-solid coupling model for gassy coal has been improved.The numerical model was founded from the improved multi-field coupling model by COMSOL Multiphysics and gas drainage by borehole down the coal seam enhanced by heat injection was modelled.The results show that the heatfluid-solid model with adsorption effects for gassy coal was well simulated by the improved multi-field model.The mechanism of coal seam gas desorption seepage under the combined action of temperature,stress and adsorption can be well described.Gas desorption and seepage can be enhanced by heat injection into coal seams.The gas drainage rate was directly proportional to the temperature of injected heat in the scope of 30-150 ℃ and increasing in the whole modelleddrainage process (0-1000 d).The increased level was maximum in the initial drainage time and decreasing gradually along with drainage time.The increasing ratio of drainage rate was maximum when the temperature raised from 30 to 60 ℃.Although the drainage rate would increase along with increasing temperature,when exceeding 60 ℃,the increasing ratio of drainage rate with rising temperature would decrease.Gas drainage promotion was more effective in coal seams with lower permeability than with higher permeability.The coal seam temperature in a 5 m distance surrounding the heat injection borehole would rise to around 60 ℃ in 3 months.That was much less than the time of gas drainage in the coal mines in sites with low permeability coal seams.Therefore,it is valuable and feasible to inject heat into coal seams to promote gas drainage,and this has strong feasibility for coal seams with low permeability which are widespread in China.展开更多
A three stage equilibrium model is developed for coal gasification in the Texaco type coal gasifiersbased on Aspen Plus to calculate the composition of product gas, carbon conversion, and gasification teml^erature. Th...A three stage equilibrium model is developed for coal gasification in the Texaco type coal gasifiersbased on Aspen Plus to calculate the composition of product gas, carbon conversion, and gasification teml^erature. The model is divided into three stages including pyrolysis and combustion stage, char gas reaction stage, and gas p.hase reaction stage. Part of the water produced in thepyrolysis and combust!on stag.e is assumed to be involved inthe second stage to react with the unburned carbon. Carbon conversion is then estimated in the second stage by steam participation ratio expressed as a function of temperature. And the gas product compositions are calculated from gas phase reactions in the third stage. The simulation results are consistent with published experimental data.展开更多
基金Supported by the National Natural Science Foundation of China(42302141).
文摘Taking the second member of the Xujiahe Formation of the Upper Triassic in the Xinchang structural belt as an example,based on data such as logging,production,seismic interpretation and test,a systematic analysis was conducted on the structural characteristics and evolution,reservoir diagenesis and densification processes,and types and stages of faults/fractures,and revealing the multi-stage and multi-factor dynamic coupled enrichment mechanisms of tight gas reservoirs.(1)In the early Yanshan period,the paleo-structural traps were formed with low-medium maturity hydrocarbons accumulating in structural highs driven by buoyancy since reservoirs were not fully densified in this stage,demonstrating paleo-structure control on traps and early hydrocarbon accumulation.(2)In the middle-late Yanshan period,the source rocks became mature to generate and expel a large quantity of hydrocarbons.Grain size and type of sandstone controlled the time of reservoir densification,which restricted the scale of hydrocarbon charging,allowing for only a small-scale migration through sand bodies near the fault/fracture or less-densified matrix reservoirs.(3)During the Himalayan period,the source rocks reached overmaturity,and the residual oil cracking gas was efficiently transported along the late-stage faults/fractures.Wells with high production capacity were mainly located in Type I and II fault/fracture zones comprising the late-stage north-south trending fourth-order faults and the late-stage fractures.The productivity of the wells was controlled by the transformation of the late-stage faults/fractures.(4)The Xinchang structural belt underwent three stages of tectonic evolution,two stages of reservoir formation,and three stages of fault/fractures development.Hydrocarbons mainly accumulated in the paleo-structure highs.After reservoir densification and late fault/fracture adjustment,a complex gas-water distribution pattern was formed.Thus,it is summarized as the model of“near-source and low-abundance hydrocarbon charging in the early stage,and differential enrichment of natural gas under the joint control of fault-fold-fracture complex,high-quality reservoirs and structural highs in the late stage”.Faults/fractures with well-coupled fault-fold-fracture-pore are favorable exploration targets with high exploration effectiveness.
基金National Natural Science Foundation of China(12135008,12132005)。
文摘The internal pressure within fission gas bubbles(FGBs)in irradiated nuclear fuels drives mechanical interactions with the surrounding fuel skeleton.To investigate the micromechanical stress fields in irradiated nuclear fuels containing pressurized FGBs,a mechanical constitutive model for the equivalent solid of FGBs was developed and validated.This model was based on the modified Van der Waals equation,incorporating the effects of surface tension.Using this model,the micromechanical fields in irradiated U-10Mo fuels with randomly distributed FGBs were calculated during uniaxial tensile testing via the finite element(FE)method.The macroscopic elastic constants of the irradiated U-10Mo fuels were then derived using homogenization theory,and the influences of bubble pressure,bubble size,and porosity on these constants were examined.Results show that adjacent FGBs exhibit mechanical interactions,which leads to distinct stress concentrations in the surrounding fuel skeleton.The macroscopic elastic constants of irradiated U-10Mo fuels decrease with increasing the macroscopic porosity,which can be quantitatively described by the Mori-Tanaka model.In contrast,bubble pressure and size have negligible effects on these constants.
基金Project(52274096)supported by the National Natural Science Foundation of ChinaProject(WS2023A03)supported by the State Key Laboratory Cultivation Base for Gas Geology and Gas Control,China。
文摘Accurate assessment of coal brittleness is crucial in the design of coal seam drilling and underground coal mining operations.This study proposes a method for evaluating the brittleness of gas-bearing coal based on a statistical damage constitutive model and energy evolution mechanisms.Initially,integrating the principle of effective stress and the Hoek-Brown criterion,a statistical damage constitutive model for gas-bearing coal is established and validated through triaxial compression tests under different gas pressures to verify its accuracy and applicability.Subsequently,employing energy evolution mechanism,two energy characteristic parameters(elastic energy proportion and dissipated energy proportion)are analyzed.Based on the damage stress thresholds,the damage evolution characteristics of gas bearing coal were explored.Finally,by integrating energy characteristic parameters with damage parameters,a novel brittleness index is proposed.The results demonstrate that the theoretical curves derived from the statistical damage constitutive model closely align with the test curves,accurately reflecting the stress−strain characteristics of gas-bearing coal and revealing the stress drop and softening characteristics of coal in the post-peak stage.The shape parameter and scale parameter represent the brittleness and macroscopic strength of the coal,respectively.As gas pressure increases from 1 to 5 MPa,the shape parameter and the scale parameter decrease by 22.18%and 60.45%,respectively,indicating a reduction in both brittleness and strength of the coal.Parameters such as maximum damage rate and peak elastic energy storage limit positively correlate with coal brittleness.The brittleness index effectively captures the brittleness characteristics and reveals a decrease in brittleness and an increase in sensitivity to plastic deformation under higher gas pressure conditions.
基金Supported by the Research Project of CNOOC(KJZH-2021-0003-00).
文摘Based on petroleum exploration and new progress of oil and gas geology study in the Qiongdongnan Basin,combined with seismic,logging,drilling,core,sidewall coring,geochemistry data,a systematic study is conducted on the source,reservoir-cap conditions,trap types,migration and accumulation characteristics,enrichment mechanisms,and reservoir formation models of ultra-deep water and ultra-shallow natural gas,taking the Lingshui 36-1 gas field as an example.(1)The genetic types of the ultra-deep water and ultra-shallow natural gas in the Qiongdongnan Basin include thermogenic gas and biogenic gas,and dominated by thermogenic gas.(2)The reservoirs are mainly composed of the Quaternary deep-water submarine fan sandstone.(3)The types of cap rocks include deep-sea mudstone,mass transport deposits mudstone,and hydrate-bearing formations.(4)The types of traps are mainly lithological,and also include structural-lithological traps.(5)The migration channels include vertical transport channels such as faults,gas chimneys,fracture zones,and lateral transport layers such as large sand bodies and unconformity surfaces,forming a single or composite transport framework.A new natural gas accumulation model is proposed for ultra-deep water and ultra-shallow layers,that is,dual source hydrocarbon supply,gas chimney and submarine fan composite migration,deep-sea mudstone-mass transport deposits mudstone-hydrate-bearing strata ternary sealing,late dynamic accumulation,and large-scale enrichment at ridges.The new understanding obtained from the research has reference and enlightening significance for the next step of deepwater and ultra-shallow layers,as well as oil and gas exploration in related fields or regions.
基金supported by the National Natural Science Foundation of China (No.52274073)National Key R&D Program of China (No.2024YFB4007100)+2 种基金Chongqing Natural Science Foundation Innovation and Development Joint Fund (Municipal Education Commission)(No.CSTB2024NSCQ-LZX0056)Open Research Fund of State Key Laboratory of Geomechanics and Geotechnical Engineering Safety (No.SKLGGES-024006)financial support from the Rut and Sten Brand Foundation
文摘Salt caverns are widely used for energy storage.During gas storage,the internal gas pressure fluctuates cyclically in response to energy demand,making it essential to assess how these pressure variations affect rock deformation.In this study,experiments were conducted under different cyclic gas pressure conditions to investigate this effect.The findings indicate that(1)the deformation process of salt rock can be segmented into three stages:the deceleration stage,the steady-state stage,and the acceleration stage.(2)When the axial pressure remains constant,both axial and radial deformations exhibit a stepwise increasing trend in response to cyclic gas pressure variations.Similarly,under axial graded loading,the deformations also demonstrate a progressive rise.By analyzing the deformation differences and model coefficient fluctuations within a single gas pressure cycle,it is found that radial deformation is higher sensitive to changes in cyclic gas pressure.(3)The axial deformation shows a stepwise increase,and the radial deformation showed a cyclic change with changing gas pressure.Therefore,the cyclic gas pressure influence factor α,axial loading influence factor β,and state variable σ^(*)are introduced to develop a viscoplastic ontological model that accounts for the impacts of cyclic gas pressure,confining pressure and axial stress.Validated by the deformation data,the new model can better fit both the axial deformation and the radial deformation of the three stages and has strong applicability and accuracy by changing only fewer parameters.The state variable rate shows the same stage as the deformation rate and residual strain of salt rock,which can better reflect the internal hardening of salt rock.
基金funded by the National Key Research and Development ProgramFund for Young Scientists(No.2021YFC2900400)+5 种基金the National Natural Science Foundation of China(No.52304123)Fundamental Research Funds for the Central Universities(No.2024CDJXY025)Sichuan-Chongqing Science and Technology Innovation Cooperation Program Project(No.CSTB2024TIAD-CYKJCXX0016)Postdoctoral Research Foundation of China(No.2023M730412)Postdoctoral Fellowship Program of China Postdoctoral Science Foundation(No.GZB20230914)Chongqing Outstanding Youth Science Foundation Program(No.CSTB2023NSCQ-JQX0027)。
文摘To address the issues of single warning indicators,fixed thresholds,and insufficient adaptability in coal and gas outburst early warning models,this study proposes a dynamic early warning model for gas outbursts based on adaptive fractal dimension characterization.By analyzing the nonlinear characteristics of gas concentration data,an adaptive window fractal analysis method is introduced.Combined with boxcounting dimension and variation of box dimension metrics,a cross-scale dynamic warning model for disaster prevention is established.The implementation involves three key phases:First,wavelet denoising and interpolation methods are employed for raw data preprocessing,followed by validation of fractal characteristics.Second,an adaptive window cross-scale fractal dimension method is proposed to calculate the box-counting dimension of gas concentration,enabling effective capture of multi-scale complex features.Finally,dynamic threshold partitioning is achieved through membership functions and the 3σprinciple,establishing a graded classification standard for the mine gas disaster(MGD)index.Validated through engineering applications at Shoushan#1 Coal Mine in Henan Province,the results demonstrate that the adaptive window fractal dimension curve exhibits significantly enhanced fluctuation characteristics compared to fixed window methods,with local feature detection capability improved and warning accuracy reaching 86.9%.The research reveals that this model effectively resolves the limitations of traditional methods in capturing local features and dependency on subjective thresholds through multiindicator fusion and threshold optimization,providing both theoretical foundation and practical tool for coal mine gas outburst early warning.
基金supported by the National Natural Science Foundation of China(52174162)the Fundamental Research Funds for the Central Universities(FRF-TP-20-002A3).
文摘Accurate prediction of coal and gas outburst(CGO)hazards is paramount in gas disaster prevention and control.This paper endeavors to overcome the constraints posed by traditional prediction indexes when dealing with CGO incidents under low gas pressure conditions.In pursuit of this objective,we have studied and established a mechanical model of the working face under abnormal stress and the excitation energy conditions of CGO,and proposed a method for predicting the risk of CGO under abnormal stress.On site application verification shows that when a strong outburst hazard level prediction is issued,there is a high possibility of outburst disasters occurring.In one of the three locations where we predicted strong outburst hazards,a small outburst occurred,and the accuracy of the prediction was higher than the traditional drilling cuttings index S and drilling cuttings gas desorption index q.Finally,we discuss the mechanism of CGO under the action of stress anomalies.Based on the analysis of stress distribution changes and energy accumulation characteristics of coal under abnormal stress,this article believes that the increase in outburst risk caused by high stress abnormal gradient is mainly due to two reasons:(1)The high stress abnormal gradient leads to an increase in the plastic zone of the coal seam.After the working face advances,it indirectly leads to an increase in the gas expansion energy that can be released from the coal seam before reaching a new stress equilibrium.(2)Abnormal stress leads to increased peak stress of coal body in front of working face.When coal body in elastic area transforms to plastic area,its failure speed is accelerated,which induces accelerated gas desorption and aggravates the risk of outburst.
基金supported by the National Natural Science Foundation of China(no.42277122)the Science Foun-dation of the China University of Petroleum,Beijing(No.2462024BJRC013).
文摘In recent years,large language models(LLMs)have demonstrated immense potential in practical applications to enhance work efficiency and decision-making capabilities.However,specialized LLMs in the oil and gas engineering area are rarely developed.To aid in exploring and developing deep and ultra-deep unconventional reservoirs,there is a call for a personalized LLM on oil-and gas-related rock mechanics,which may handle complex professional data and make intelligent predictions and decisions.To that end,herein,we overview general and industry-specific LLMs.Then,a systematic workflow is proposed for building this domain-specific LLM for oil and gas engineering,including data collection and processing,model construction and training,model validation,and implementation in the specific domain.Moreover,three application scenarios are investigated:knowledge extraction from textural resources,field operation with multidisciplinary integration,and intelligent decision assistance.Finally,several challenges in developing this domain-specific LLM are highlighted.Our key findings are that geological surveys,laboratory experiments,field tests,and numerical simulations form the four original sources of rock mechanics data.Those data must flow through collection,storage,processing,and governance before being fed into LLM training.This domain-specific LLM can be trained by fine-tuning a general open-source LLM with professional data and constraints such as rock mechanics datasets and principles.The LLM can then follow the commonly used training and validation processes before being implemented in the oil and gas field.However,there are three primary challenges in building this domain-specific LLM:data standardization,data security and access,and striking a compromise between physics and data when building the model structure.Some of these challenges are administrative rather than technical,and overcoming those requires close collaboration between the different interested parties and various professional practitioners.
文摘This study systematically reviews the development history and key technological breakthroughs of large gas fields in the Ordos Basin,and summarizes the development models of three gas reservoir types,low-permeability carbonate,low-permeability sandstone and tight sandstone,as well as the progress in deep coal-rock gas development.The current challenges and future development directions are also discussed.Mature development models have been formed for the three representative types of gas reservoirs in the Ordos Basin:(1)Low-permeability carbonate reservoir development model featuring groove fine-scale characterization and three-dimensional vertical succession between Upper and Lower Paleozoic formations.(2)Low-permeability sandstone reservoir development model emphasizing horizontal well pressure-depletion production and vertical well pressure-controlled production.(3)Tight sandstone gas reservoir development model focusing on single-well productivity enhancement and well placement optimization.In deep coal-rock gas development,significant progress has been achieved in reservoir evaluation,sweet spot prediction,and geosteering of horizontal wells.The three types of reservoirs have entered the mid-to-late stages of the development,when the main challenge lies in accurately characterizing residual gas,evaluating secondary gas-bearing layers,and developing precise potential-tapping strategies.In contrast,for the early-stage development of deep coal-rock gas,continuous technological upgrades and cost reduction are essential to achieving economically viable large-scale development.Four key directions of future research and technological breakthroughs are proposed:(1)Utilizing dual-porosity(fracture-matrix)modeling techniques in low-permeability carbonate reservoirs to delineate the volume and distribution of remaining gas in secondary pay zones,supporting well pattern optimization and production enhancement of existing wells.(2)Integrating well-log and seismic data to characterize reservoir spatial distribution of successive strata,enhancing drilling success rates in low-permeability sandstone reservoirs.(3)Utilizing the advantages of horizontal wells to penetrate effective reservoirs laterally,achieving meter-scale quantification of small-scale single sand bodies in tight gas reservoirs,and applying high-resolution 3D geological models to clarify the distribution of remaining gas and guide well placement optimization.(4)Further strengthening the evaluation of deep coal-rock gas in terms of resource potential,well type and pattern,reservoir stimulation,single-well performance,and economic viability.
基金supported by the National Natural Science Foundation of China(Grant No.52375340,51975263,52405366).
文摘A three-dimensional numerical model of laser-arc hybrid plasma for aluminum alloy fillet joints is developed in this study.This mod-el accounts for the geometric complexity of fillet joints,the physical properties of shielding gases with varying He-Ar ratios,and the coupling between arc plasma and laser-induced metal plume.The accuracy of the model is validated using a high-speed camera.The effects of varying He contents in the shielding gas on both the temperature and flow velocity of hybrid plasma,as well as the distribu-tion of laser-induced metal vapor mass,were investigated separately.The maximum temperature and size of arc plasma decrease as the He volume ratio increases,the arc distribution becomes more concentrated,and its flow velocity initially decreases and then sharply increases.At high helium content,both the flow velocity of hybrid plasma and metal vapor are high,the metal vapor is con-centrated on the right side of keyhole,and its flow appears chaotic.The flow state of arc plasma is most stable when the shielding gas consists of 50%He+50%Ar.
基金supported by the project of the China Geological Survey(DD20221661).
文摘The black shales of Wufeng and Longmaxi Formation(Late Ordovician-Early Silurian period)in Sichuan Basin are the main strata for marine shale gas exploration,which have a yearly shale gas production of 228×10^(8)m^(3)and cumulative shale gas production of 919×10^(8)m^(3).According to the lithological and biological features,filling sequences,sedimentary structures and lab analysis,the authors divided the Wufeng/Guanyinqiao and Longmaxi Formations into shore,tidal flat,shoal,shallow water shelf and deep water shelf facies,and confirmed that a shallow water deposition between the two sets of shales.Although both Formations contain similar shales,their formation mechanisms differ.During the deposition of Wufeng shale,influenced by the Caledonian Movement,the Central Sichuan and Guizhou Uplifts led to the transformation of the Sichuan Basin into a back-bulge basin.Coinstantaneous volcanic activity provided significant nutrients,contributing to the deposition of Wufeng Formation black shales.In contrast,during the deposition of Longmaxi shale,collisions caused basement subsidence,melting glaciers raised sea levels,and renewed volcanic activity provided additional nutrients,leading to Longmaxi Formation black shale accumulation.Considering the basic sedimentary geology and shale gas characteristics,areas such as Suijiang-Leibo-Daguan,Luzhou-Zigong,Weirong-Yongchuan,and Nanchuan-Dingshan are identified as key prospects for future shale gas exploration in the Wufeng-Longmaxi Formations.
基金supported by the Independent Innovation Research Program of China University of Petroleum(East China)(No.27RA2215005)。
文摘A novel shear damage model based on homogenization theory and a modified Mohr-Coulomb criterion is proposed to predict the full deformation process of gas hydrate-bearing sediments(GHBSs)during shearing by analyzing micro-mechanisms of shear deformation and failure characteristics.Then,the physical significance of the model's parameters is explored.Finally,the damage evolution and shear stress partition inside GHBSs during the shearing process are analyzed in detail.The results show that model parameters have clear physical meaning,and the shear damage model is capable of reflecting the nonlinear deformation and strain softening characteristics of GHBSs due to its ability to better describe the damage evolution and shear stress partition mechanisms inside GHBSs during the shearing process.Comparisons of experimental and theoretical results show that the global performance of the novel shear damage model is satisfactory.The model is expected to be widely adopted to analyze submarine landslide instability due to hydrate dissociation.
基金supported by the National Natural Science Foundation of China(No.41174087,41204089)the National Oil and Gas Major Project(No.2011ZX05005-005)
文摘We investigated the effect of microscopic distribution modes of hydrates in porous sediments, and the saturation of hydrates and free gas on the elastic properties of saturated sediments. We simulated the propagation of seismic waves in gas hydrate-bearing sediments beneath the seafloor, and obtained the common receiver gathers of compressional waves（P-waves） and shear waves（S-waves）. The numerical results suggest that the interface between sediments containing gas hydrates and free gas produces a large-amplitude bottomsimulating reflector. The analysis of multicomponent common receiver data suggests that ocean-bottom seismometers receive the converted waves of upgoing P- and S-waves, which increases the complexity of the wavefield record.
基金supported by the Program for New Century Excellent Talents in University(No.NCET-04-0370)
文摘We discuss the feasibility of using controlled-source electromagnetic （CSEM） in the frequency domain for prospecting marine gas hydrates. Based on the Ocean Drilling Program （ODP） Leg 164 log data, we have established several 1-D resistivity models which have different gas hydrate concentrations. Meanwhile, we analyzed the electromagnetic response of marine gas hydrates in the frequency domain based on these models. We also studied the relationship between electrical field magnitude or phase and parameters such as receiver-transmitter distance and frequency. Our numerical modeling results provide us with a quantitative reference for exploration and resource evaluation of marine gas hydrates.
文摘This paper briefs the configuration and performance of large size gas turbines and their composed combined cycle power plants designed and produced by four large renown gas turbine manufacturing firms in the world, providing reference for the relevant sectors and enterprises in importing advanced gas turbines and technologies.
基金Supported by the National Natural Science Foundation of China (41872128)the CNPC Major Science and Technology Project (2021DJ0101)。
文摘Based on the analysis of Upper Paleozoic source rocks, source-reservoir-caprock assemblage, and gas accumulation characteristics in the Ordos Basin, the gas accumulation geological model of total petroleum system is determined. Then, taking the Carboniferous Benxi Formation and the Permian Taiyuan Formation and Shanxi Formation as examples, the main controlling factors of gas accumulation and enrichment are discussed, and the gas enrichment models of total petroleum system are established. The results show that the source rocks, faults and tight reservoirs and their mutual coupling relations control the distribution and enrichment of gas. Specifically, the distribution and hydrocarbon generation capacity of source rocks control the enrichment degree and distribution range of retained shale gas and tight gas in the source. The coupling between the hydrocarbon generation capacity of source rocks and the physical properties of tight reservoirs controls the distribution and sweet spot development of near-source tight gas in the basin center. The far-source tight gas in the basin margin is mainly controlled by the distribution of faults, and the distribution of inner-source, near-source and far-source gas is adjusted and reformed by faults. Generally, the Upper Paleozoic gas in the Ordos Basin is recognized in four enrichment models: inner-source coalbed gas and shale gas, inner-source tight sandstone gas, near-source tight gas, and far-source fault-transported gas. In the Ordos Basin, inner-source tight gas and near-source tight gas are the current focuses of exploration, and inner-source coalbed gas and shale gas and far-source gas will be important potential targets in the future.
文摘The environmental risks associated with casing deformation in unconventional(shale)gas wells positioned in abutment pillars of longwall mines is a concern to many in the mining and gas well industry.With the recent interest in shale exploration and the proximity to longwall mining in Southwestern Pennsylvania,the risk to mine workers could be catastrophic as fractures in surrounding strata create pathways for transport of leaked gases.Hence,this research by the National Institute for Occupational Safety and Health(NIOSH)presents an analytical model of the gas transport through fractures in a low permeable stratum.The derived equations are used to conduct parametric studies of specific transport conditions to understand the influence of stratum geology,fracture lengths,and the leaked gas properties on subsurface transport.The results indicated that the prediction that the subsurface gas flux decreases with an increase in fracture length is specifically for a non-gassy stratum.The sub-transport trend could be significantly impacted by the stratum gas generation rate within specific fracture lengths,which emphasized the importance of the stratum geology.These findings provide new insights for improved understanding of subsurface gas transport to ensure mine safety.
基金the Ministry of Education and Science of Ukraine(No.0117U001129).
文摘A proposed concept of outburst initiation examines the release of a large amount of gas from coal seams resulted from disintegrating thermodynamically unstable coal organic matter(COM).A coal microstructure is assumed to getting unstable due to shear component appearance triggered by mining operations and tectonic activities considered as the primary factor while COM disintegration under the impact of weak electric fields can be defined as a secondary one.The energy of elastic deformations stored in the coal microstructure activates chemical reactions to tilt the energy balance in a“coal–gas”system.Based on this concept a mathematical model of a gas flow in the coal where porosity and permeability are changed due to chemical reactions has been developed.Using this model we calculated gas pressure changes in the pores initiated by gas release near the working face till satisfying force and energy criteria of outburst.The simulation results demonstrated forming overpressure zone in the area of intensive gas release with enhanced porosity and permeability.The calculated outburst parameters are well combined with those evaluated by field measurements.
基金The authors acknowledge the financial support from the Natural Science Foundation of China(U1704131)Program for Science&Technology Innovation Talents in Universities of Henan Province(18HASTIT018)the Program for Changjiang Scholars and Innovative Research Team in University(IRT_16R22).
文摘Improving the absorbed gas to active desorption and seepage and delaying gas drainage attenuation are considered as key methods for increasing drainage efficiency and gas output.According to the solid mechanics theory,the nonlinear Darcy seepage theory and thermodynamics,the heat-fluid-solid coupling model for gassy coal has been improved.The numerical model was founded from the improved multi-field coupling model by COMSOL Multiphysics and gas drainage by borehole down the coal seam enhanced by heat injection was modelled.The results show that the heatfluid-solid model with adsorption effects for gassy coal was well simulated by the improved multi-field model.The mechanism of coal seam gas desorption seepage under the combined action of temperature,stress and adsorption can be well described.Gas desorption and seepage can be enhanced by heat injection into coal seams.The gas drainage rate was directly proportional to the temperature of injected heat in the scope of 30-150 ℃ and increasing in the whole modelleddrainage process (0-1000 d).The increased level was maximum in the initial drainage time and decreasing gradually along with drainage time.The increasing ratio of drainage rate was maximum when the temperature raised from 30 to 60 ℃.Although the drainage rate would increase along with increasing temperature,when exceeding 60 ℃,the increasing ratio of drainage rate with rising temperature would decrease.Gas drainage promotion was more effective in coal seams with lower permeability than with higher permeability.The coal seam temperature in a 5 m distance surrounding the heat injection borehole would rise to around 60 ℃ in 3 months.That was much less than the time of gas drainage in the coal mines in sites with low permeability coal seams.Therefore,it is valuable and feasible to inject heat into coal seams to promote gas drainage,and this has strong feasibility for coal seams with low permeability which are widespread in China.
基金Supported by the Major State Basic Research Development Program of China(2012CB720500)the National Natural Science Foundation of China(U1162202,61174118)+1 种基金the National Science Fund for Outstanding Young Scholars(61222303)Shanghai Leading Academic Discipline Project(B504)
文摘A three stage equilibrium model is developed for coal gasification in the Texaco type coal gasifiersbased on Aspen Plus to calculate the composition of product gas, carbon conversion, and gasification teml^erature. The model is divided into three stages including pyrolysis and combustion stage, char gas reaction stage, and gas p.hase reaction stage. Part of the water produced in thepyrolysis and combust!on stag.e is assumed to be involved inthe second stage to react with the unburned carbon. Carbon conversion is then estimated in the second stage by steam participation ratio expressed as a function of temperature. And the gas product compositions are calculated from gas phase reactions in the third stage. The simulation results are consistent with published experimental data.
