The reactive halogens play key roles in the destruction of boundary layer ozone by catalytic reactions and provide a fast pathway to the sedimentation of elemental gaseous mercury.The presence of bromine oxides in the...The reactive halogens play key roles in the destruction of boundary layer ozone by catalytic reactions and provide a fast pathway to the sedimentation of elemental gaseous mercury.The presence of bromine oxides in the lower展开更多
The separation of halogens and recovery of heavy metals from secondary copper smelting(SCS)dust using a sulfating roasting−water leaching process were investigated.The thermodynamic analysis results confirm the feasib...The separation of halogens and recovery of heavy metals from secondary copper smelting(SCS)dust using a sulfating roasting−water leaching process were investigated.The thermodynamic analysis results confirm the feasibility of the phase transformation to metal sulfates and to gaseous HF and HCl.Under the sulfating roasting conditions of the roasting temperature of 250℃ and the sulfuric acid excess coefficient of 1.8,over 74 wt.%of F and 98 wt.%of Cl were volatilized into flue gas.Approximately 98.6 wt.%of Zn and 96.5 wt.%of Cu in the roasting product were dissolved into the leaching solution after the water leaching process,while the leaching efficiencies of Pb and Sn were only 0.12%and 0.22%,respectively.The mechanism studies indicate the pivotal effect of roasting temperature on the sulphation reactions from various metal species to metal sulfates and the salting out reactions from various metal halides to gaseous hydrogen halides.展开更多
To constrain the ore-fluid source(s)of the Laoshankou Fe-Cu-Au deposit(Junggar orogen,NW China),we analyzed the fluid inclusion(FI)noble gas(Ar,Kr and Xe)and halogen(Cl,Br and I)compositions in the hydrothermal epidot...To constrain the ore-fluid source(s)of the Laoshankou Fe-Cu-Au deposit(Junggar orogen,NW China),we analyzed the fluid inclusion(FI)noble gas(Ar,Kr and Xe)and halogen(Cl,Br and I)compositions in the hydrothermal epidote and quartz.Four hypogene alteration/mineralization stages,including(I)pre-ore Ca-silicate,(II)early-ore amphibole-epidote-magnetite,(III)late-ore pyrite-chalcopyrite,and(IV)post-ore hydrothermal veining,have been identified at Laoshankou.Stage II FIs have salinity of 15.7 wt.%(NaCl eq.),I/Cl molar ratios of 75×10^(−6)-135×10^(−6),and Br/Cl molar ratios of 1.4×10^(−3)-2.1×10^(−3).The moderately-high seawatercorrected Br*/I ratios(0.5-1.5)and low 40ArE/Cl slope(-10−5)indicate the presence of sedimentary marine pore fluid,which was modified by seawater reacting with the Beitashan Fm.volcanic rocks.Stage III fluid is more saline than their stage II and IV counterparts,reaching up to 23.3 wt.%(NaCl+CaCl2 eq.)close to halite saturation(-26 wt.%).The fluid has I/Cl ratios of 75×10^(−6)-90×10^(−6) and Br/Cl ratios of 1.5×10^(−3)-1.8×10^(−3).Considering the increasing 40ArE/Cl trend toward bittern brine and the higher 36Ar content than air-saturated water(ASW),a bittern fluid source is inferred from seawater evaporation,which was modified by interaction with organic-rich marine sedimentary rocks.Stage IV FIs have lower temperature(110-228°C)and Br/Cl(0.90×10^(−3)-1.2×10^(−3)),but higher 36Ar content than ASW,indicative of dissolved evaporite or halite input.Considering also the lowδDfluid(−114‰to−144‰)andδ18Ofluid(2.1‰-3.5‰)values,meteoric water(with minor dissolved evaporites)likely dominated the stage IV fluid.The evaporites may have formed through continuous evaporation of the stage III surface-derived bittern.Involvement of non-magmatic fluids and different ore-fluid origins in stages II and III suggest that the ore-forming process was different from a typical magmatichydrothermal fluid-dominated skarn mineralization,which was previously proposed for Laoshankou.Our noble gas and halogen study at Laoshankou provide new insights on the fluid sources for the Paleozoic Fe−Cu(−Au)deposits in the Central Asian Orogenic Belt(CAOB),and our non-magmatic fluid source interpretation is consistent with the basin inversion setting for the mineralization.展开更多
Conventionally,organic radicals adhere to the Aufbau principle,the energy level of the singly occupied molecular orbital(SOMO)is not below the highest occupied molecular orbital(HOMO),but somewhat abnormal phenomena h...Conventionally,organic radicals adhere to the Aufbau principle,the energy level of the singly occupied molecular orbital(SOMO)is not below the highest occupied molecular orbital(HOMO),but somewhat abnormal phenomena have appeared recently.In this study,we introduce a novel strategy by incorporating unique NHC-Au-X units into a tris(2,4,6-trichlorophenyl)methyl(TTM)system to create metal-involved open-shell complexes,denoted as TTM-NHC-Au-X(X=I,Br,or Cl).Density-functional theory calculations were used to predict an inversion in the energy of the SOMO and highest doubly occupied molecular orbital(HOMO)of TTM-NHC-Au-I,which is supported by experimental results.Organometallic radicals TTM-NHC-Au-X demonstrated distinct properties with different coordinated halides.The radical behaviors have been investigated by EPR,UV-vis spectroscopy and cyclic voltammetry,additional structural information provided by structurally comparing related the precursor complexes given by X-ray crystallography.TTM-NHC-Au-I with SOMO-HOMO conversion(SHC)features a highly thermal decomposition temperature up to 305℃.Furthermore,the photostability of TTM-NHC-Au-I was found to be 75and 23 times greater than that of TTM-NHC-Au-Br and TTM-NHC-Au-Cl,respectively.These findings provide valuable insights into the structural and electronic design principles governing the occurrence of SOMO-HOMO conversion in open-shell systems.展开更多
The Dexing porphyry deposit is the largest porphyry Cu–Mo–Au deposit in South China.Biotite composition can record the physicochemical conditions and evolution history of magmatic-hydrothermal system.Biotite from th...The Dexing porphyry deposit is the largest porphyry Cu–Mo–Au deposit in South China.Biotite composition can record the physicochemical conditions and evolution history of magmatic-hydrothermal system.Biotite from the Dexing porphyry deposit could be divided to three types:primary magmatic biotite(Bi-M),hydrothermal altered magmatic biotite(Bi-A)and hydrothermal biotite(Bi-H).The temperature of Bi-M and Bi-H range from 719 to 767℃ and 690 to 727℃,respectively.Both magmatic and hydrothermal biotite have high Fe^(3+)/Fe^(2+)ratios(from 0.18 to 0.24)and XMgvalues(from 0.57 to 0.66),indicating a high oxygen fugacity.BiM has F lower than Bi-A and Bi-H(up to 0.26 wt%),but has Cl(Cl=0.18–0.30 wt%)similar to Bi-A and Bi-H(Cl=0.21–0.35 wt%),suggesting that high Cl/F ratios of early hydrothermal fluid may result from the exsolution from high Cl magma.From potassic alteration zone to phyllic and propylitic alteration zones,Cl decreases with increasing Cu,whereas F increases roughly.Therefore,Cl mostly originate from magma,but enrichment of F possibly results from reaction of fluids and Neoproterozoic strata.Negative correlation between Cl and Cu indicates that Cl might act as an important catalyst during Cu mineralization process.Biotite from Dexing has similar halogen compositions to other porphyry Cu-/Mo deposits in the world.Chlorine contents of hydrothermal fluid may be critical for Cu transportation and enrichment,while consumption of Cl would promote Cu deposition.展开更多
The three halogen solids(Cl_(2),Br_(2),and I_(2))have the isostructural diatomic molecular phaseⅠwith a space group of Cmca at ambient pressure.At high pressure,they all go through an intermediate phaseⅤwith incomme...The three halogen solids(Cl_(2),Br_(2),and I_(2))have the isostructural diatomic molecular phaseⅠwith a space group of Cmca at ambient pressure.At high pressure,they all go through an intermediate phaseⅤwith incommensurate structures before eventually dissociating into the monatomic phaseⅡ.However,a new structural transition between phaseⅠandⅤwith anomalous bond-length behavior was observed in bromine under pressure,which,so far,has not been confirmed in iodine and chlorine.Here,we perform first-principles calculations for iodine and chlorine.The new structural transition was predicted to be common to all three halogens under pressure.The transition pressures might be systematically underestimated by the imperfect van der Waals correction method,but they follow the order Cl_(2)>Br_(2)>I_(2),which is consistent with other pressure-induced structural transitions such as metallization and the molecular-to-monatomic transition.展开更多
HALOGENS, as mineralizer elements, have been attracting ever increasing attention of geological workers inpetrogenetically experimental and ore-forming fluid geochemical studies. However, little research workhas been ...HALOGENS, as mineralizer elements, have been attracting ever increasing attention of geological workers inpetrogenetically experimental and ore-forming fluid geochemical studies. However, little research workhas been done on the contents, variation characteristics and significance of halogens in solid ores(rocks). It is found in the study of the Danzhai Hg-Au deposit that (i) variations in the contents ofhalogens and their distribution regularities in solid rocks and ores can shed light on the formation of thedeposit; and (ii) halogens can serve the function of indicator elements in search of buried orebodies. 1 Main characteristics of the ore展开更多
Aqueous Zn-iodine batteries(ZIBs)face the formidable challenges towards practical implementation,including metal corrosion and rampant dendrite growth on the Zn anode side,and shuttle effect of polyiodide species from...Aqueous Zn-iodine batteries(ZIBs)face the formidable challenges towards practical implementation,including metal corrosion and rampant dendrite growth on the Zn anode side,and shuttle effect of polyiodide species from the cathode side.These challenges lead to poor cycle stability and severe self-discharge.From the fabrication and cost point of view,it is technologically more viable to deploy electrolyte engineering than electrode protection strategies.More importantly,a synchronous method for modulation of both cathode and anode is pivotal,which has been often neglected in prior studies.In this work,cationic poly(allylamine hydrochloride)(Pah^(+))is adopted as a low-cost dual-function electrolyte additive for ZIBs.We elaborate the synchronous effect by Pah^(+)in stabilizing Zn anode and immobilizing polyiodide anions.The fabricated Zn-iodine coin cell with Pah^(+)(ZnI_(2) loading:25 mg cm^(−2))stably cycles 1000 times at 1 C,and a single-layered 3.4 cm^(2) pouch cell(N/P ratio~1.5)with the same mass loading cycles over 300 times with insignificant capacity decay.展开更多
Aqueous zinc-halogen batteries are promising candidates for large-scale energy storage due to their abundant resources,intrinsic safety,and high theoretical capacity.Nevertheless,the uncontrollable zinc dendrite growt...Aqueous zinc-halogen batteries are promising candidates for large-scale energy storage due to their abundant resources,intrinsic safety,and high theoretical capacity.Nevertheless,the uncontrollable zinc dendrite growth and spontaneous shuttle effect of active species have prohibited their practical implementation.Herein,a double-layered protective film based on zinc-ethylenediamine tetramethylene phosphonic acid(ZEA)artificial film and ZnF2-rich solid electrolyte interphase(SEI)layer has been successfully fabricated on the zinc metal anode via electrode/electrolyte synergistic optimization.The ZEA-based artificial film shows strong affinity for the ZnF2-rich SEI layer,therefore effectively suppressing the SEI breakage and facilitating the construction of double-layered protective film on the zinc metal anode.Such double-layered architecture not only modulates Zn2+flux and suppresses the zinc dendrite growth,but also blocks the direct contact between the metal anode and electrolyte,thus mitigating the corrosion from the active species.When employing optimized metal anodes and electrolytes,the as-developed zinc-(dual)halogen batteries present high areal capacity and satisfactory cycling stability.This work provides a new avenue for developing aqueous zinc-(dual)halogen batteries.展开更多
The highly selective catalytic hydrogenation of halogenated nitroaromatics was achieved by employing Pd‑based catalysts that were co‑modified with organic and inorganic ligands.It was demonstrated that the catalysts c...The highly selective catalytic hydrogenation of halogenated nitroaromatics was achieved by employing Pd‑based catalysts that were co‑modified with organic and inorganic ligands.It was demonstrated that the catalysts contained Pd species in mixed valence states,with high valence Pd at the metal‑support interface and zero valence Pd at the metal surface.While the strong coordination of triphenylphosphine(PPh3)to Pd0 on the Pd surface prevents the adsorption of halogenated nitroaromatics and thus dehalogenation,the coordination of sodium metavanadate(NaVO3)to high‑valence Pd sites at the interface helps to activate H2 in a heterolytic pathway for the selective hydrogenation of nitro‑groups.The excellent catalytic performance of the interfacial active sites enables the selective hydrogenation of a wide range of halogenated nitroaromatics.展开更多
The piezocatalytic characteristic of bismuth oxyhalides(BiOX,X=Cl,Br,and I) has been increasingly capturing interest for its potential in hydrogen evolution reaction(HER) through water splitting process.The performanc...The piezocatalytic characteristic of bismuth oxyhalides(BiOX,X=Cl,Br,and I) has been increasingly capturing interest for its potential in hydrogen evolution reaction(HER) through water splitting process.The performance regarding these piezocatalysts is closely related to the halogen element present in BiOX;yet,the specific influence mechanisms remain unclear.In this study,we prepared BiOX catalysts via a hydrothermal process and explored their piezocatalytic HER activities.Owing to the layered bismuth s tructure,the resulting sheet-like piezocatalysts can efficiently capture the mechanic stimulus and allow the robust piezoelectric field,contributing to the piezocatalytic operation.It demonstrates that the BiOBr achieves a remarkable piezocatalytic HER efficiency of 813 μmol g^(-1)h^(-1),outperforming BiOCl and BiOI.The density functional theory(DFT)calculation results reveal that the BiOBr with moderate halogen atom size and lattice layer spacing possesses the strongest piezoelectricity,which enhances the separation and transfer of electron-hole pairs.Meanwhile,the exposed Br atom layer facilitates a large Bader charge and a low surface Gibbs free energy(ΔG_(H)),enhancing charge transfer for hydrogen reduction at the solid-liquid surface,thereby increasing the HER efficiency.This research sheds light on the halogen-dependent piezocatalytic activity of BiOX catalysts,offering valuable insights for the development of high-performance piezocatalysts.展开更多
Heteroatom doping has emerged as a powerful strategy to optimize the catalytic and adsorption abilities of electrocatalysts by regulating the electronic structure,thereby enabling the development of efficient electroc...Heteroatom doping has emerged as a powerful strategy to optimize the catalytic and adsorption abilities of electrocatalysts by regulating the electronic structure,thereby enabling the development of efficient electrocatalysts for lithium-sulfur(Li-S)batteries.However,the correlation between the properties of doped atoms and adsorptio n-catalytic ability,as well as the interconnection between adsorption strength and catalytic activity,remains underexplored.Herein,we employed halogen atoms(F,Cl,and Br)with different electronegativities to dope nickel phosphide(Ni_(2)P),aiming to modulate the adsorption properties toward lithium polysulfides(LiPSs).We systematically explored the relationship between the electronegativity of the doping atoms and the adsorption strength,followed by exploring the connection between adsorption and catalytic capabilities.Combined experimental and theoretical analyses reveal that doping halogen atoms effectively strengthens d-p orbital hybridization between Ni atoms and S atoms,thereby enhancing LiPSs anchoring and conversion.Specifically,the chemical adsorption capability is enhanced as the electronegativity of the doped atoms increases.Moreover,the catalytic activity presents a volcano-like trend with the enhancement of adsorption performance,wherein the activity initially increases and subsequently diminishes.Therefore,Cl-doped Ni_(2)P with moderate chemisorption ability exhibits optimal redox kinetics in bidirectional sulfur conversion.Consequently,the Li-S batteries with Cl-Ni_(2)P-separators deliver a high-rate capacity of 790 mAh g^(-1)at 5 C and achieve a remarkable areal capacity of 7.36 mAh cm^(-2)under practical conditions(sulfur loading:7.10 mg cm^(-2);electrolyte/sulfur(E/S)ratio:5μL mg^(-1)).This work uncovers the significance of achieving a balance between adsorption and catalytic capabilities,offering insights into designing efficient electrocatalysts for lithium-sulfur batteries.展开更多
Existing organic halide synthesis routes typically employ elemental halogens(X_(2),X=Cl or Br),leading to low atom economy and significant environmental pollution.In this work,we developed an atom efficient electrosyn...Existing organic halide synthesis routes typically employ elemental halogens(X_(2),X=Cl or Br),leading to low atom economy and significant environmental pollution.In this work,we developed an atom efficient electrosynthesis and separation strategy for halogenation reagents—N-chlorosuccinimide(NCS)and N-bromosuccinimide(NBS)—at high current densities.Faradic efficiency(FE)of 91.0%and 81.3%was achieved for NCS and NBS generation on RuO_(x)/TiO_(2)/Ti in a batch cell,respectively.Electrosynthesis of NCS likely involves both heterogeneous catalytic and homogeneous tandem pathways,while NBS is likely formed in a Langmuir-Hinshelwood mechanism with a proton-coupled electron transfer as the rate-determining step.A coupled continuous electrocatalytic synthesis and in situ separation setup was developed for the efficient production of NCS and NBS,which yielded 0.77 g of NCS in 12000 s and 0.81 g of NBS in 15000 s,both with relative purity exceeding 95%.The halogenation of acetone using NCS and NBS enabled gram-scale production of the key intermediate in organic synthesis,1-halogenacetone,with over 95%recovery of succinimide.展开更多
Rice,a primary food staple for over half of the global population,is susceptible to environmental pollution.The presence of lipophilic halogenated contaminants,including halogenated polycyclic aromatic hydrocarbons(XP...Rice,a primary food staple for over half of the global population,is susceptible to environmental pollution.The presence of lipophilic halogenated contaminants,including halogenated polycyclic aromatic hydrocarbons(XPAHs),polychlorinated biphenyls(PCBs),organochlorine pesticides(OCPs),brominated flame retardants(BFRs),and polyfluoroalkyl substances(PFAS),has become a growing concern due to their potential health risks and environmental impact.This review focused on the research of lipophilic halogenated contaminants in rice.We summarized the physicochemical properties,toxicity profiles,and contamination levels in rice.Moreover,the strategies for reducing lipophilic halogenated contaminant levels in rice were summarized and proposed,such as phytoremediation and improved processing methods.These findings can provide a reference for the understanding and control of lipophilic halogenated contaminants during rice growing and processing,and therefore reduce the associated risks.展开更多
Organic solar cells(OSCs)have emerged as promising candidates for next‐generation photovoltaics,yet traditional bulk heterojunction(BHJ)devices face inherent limitations in morphology control and phase separation.La...Organic solar cells(OSCs)have emerged as promising candidates for next‐generation photovoltaics,yet traditional bulk heterojunction(BHJ)devices face inherent limitations in morphology control and phase separation.Layer‐by‐layer(LbL)processing with a p–i–n configuration offers an innovative solution by enabling precise control over donor–acceptor distribution and interfacial characteristics.Here,we systematically investigate nine halogen‐functionalized additives across three categories—methyl halides,thiophene halides,and benzene halides—for optimizing LbL device performance.These additives,distinguished by their diverse thermal properties and solid–liquid transformation capabilities below 100°C,are functionalized as both nucleation centers and morphology‐modulating plasticizers during thermal treatment.Among them,2‐bromo‐5‐iodothiophene(BIT)demonstrates superior performance through synergistic effects of its bromine–iodine combination and thiophene core in mediating donor–acceptor interactions.LbL devices processed with BIT achieve exceptional metrics in the PM6/L8‐BO system,including a open‐circuit voltage of 0.916 V,a short‐circuit current density of 27.12 mA cm−2,and an fill factor of 80.97%,resulting in an impressive power conversion efficiency of 20.12%.This study establishes a molecular design strategy for halogen‐functionalized additives that simultaneously optimizes both donor and acceptor layers while maintaining processing simplicity for potential industrial applications.展开更多
Halogenated aromatic disinfection byproducts(DBPs)are gradually receiving attention due to their high detection frequency and usually higher toxicity than regulated DBPs.In this study,we established a solid phase extr...Halogenated aromatic disinfection byproducts(DBPs)are gradually receiving attention due to their high detection frequency and usually higher toxicity than regulated DBPs.In this study,we established a solid phase extraction(SPE)-LC-MS/MS method to simultaneously trace analyze 59 halogenated aromatic DBPs.The limits of detection and limits of quantification of halogenated aromatic DBPs ranged from 0.03 to 135.23 ng/L and from 0.1 to 450.76 ng/L,respectively.The range of recoveries and relative standard deviation(RSD)in river water were between 72.41%to 119.54%and 1.86%to 16.03%,respectively.Therefore,this method can be used to accurately analyze trace levels of halogenated aromatic DBPs in drinking water.The occurrence and transformation of halogenated aromatic DBPs were explored based on this method.In the chlorinated simulated source water and chlorinated river water,20 and 45 halogenated aromatic DBPs were determined,respectively.The active halogen species(HOCl,HOBr,and HOI)first reacted with natural organic matter(NOM)to form halogenated aromatic DBPs.Then,chlorine further reacted with the halogenated aromatic DBPs to convert them into small-molecule halogenated aliphatic DBPs through oxidation,electrophilic substitution,and hydrolysis reaction,etc.In the chlorinated simulated source water,chlorinated river water,and tap water,the toxicity contribution of bromoacetic acids(Br-HAAs)accounted for themajority(>71.16%).Given that halogenated aromatic DBPs are intermediate products of halogenated aliphatic DBPs,controlling the formation of halogenated aromatic DBPs is beneficial in decreasing the formation of halogenated aliphatic DBPs,thereby diminishing the toxicity of drinking water.展开更多
The rovibrational spectra of thioanisole(TA)and its halogenated derivatives,3-fluorothioanisole(3FTA)and 3-chlorothioanisole(3ClTA),were measured using synchrotron-based Fourier transform infrared spectroscopy(FTIR)at...The rovibrational spectra of thioanisole(TA)and its halogenated derivatives,3-fluorothioanisole(3FTA)and 3-chlorothioanisole(3ClTA),were measured using synchrotron-based Fourier transform infrared spectroscopy(FTIR)at the Canadian Light Source.Combined with density functional theory calculations,the stable structures and vibrational modes of TA,3FTA,and 3ClTA in their vibrational states were analyzed.The theoretical vibrational mode frequencies were corrected by simulating the rotational structure of a vibrational band.The contributions of the cis-and trans-isomers of 3FTA and 3ClTA to the FTIR spectra at 298 K were estimated using the Boltzmann distribution,revealing their coexistence in the experimental spectra.The results indicate that both fluorine and chlorine substitution significantly affect the vibrational modes,particularly in the benzene ring.Compared to TA,the FTIR spectra of 3FTA and 3ClTA show changes in the frequencies and intensities of some vibrational modes,with halogen substitution causing specific modes to shift to higher wavenumbers.A comparison of the FTIR spectra of TA,3FTA,and 3ClTA highlights the influence of halogen substitution on vibrational properties,emphasizing how the type and position of the substituent affect frequency shifts and spectral intensities.These findings provide deeper insights into how halogenation alters vibrational spectra,which is crucial for further spectral analysis and molecular structure determination.展开更多
The adsorption of low-coverage of F and Cl adatoms on the Mg（0001） surface was investigated using first-principles calculations based on the density functional theory（DFT）.The stability of the（2×2） structur...The adsorption of low-coverage of F and Cl adatoms on the Mg（0001） surface was investigated using first-principles calculations based on the density functional theory（DFT）.The stability of the（2×2） structures formed by halogen atoms adsorbed at different sites was determined.The difference between the adsorption of F and Cl on Mg（0001） surface was also discussed.The calculation results show that hollow sites are the energetically most favorable at the low-coverage.It can be concluded from the Mulliken charges and density of states that electrons transfer from the substrate Mg atoms to the adatoms,which leads to the formation of adsorbate bond and further causes the stronger interaction between Mg atom and adatom.The interaction between Cl and Mg atoms is weaker than the interaction between F and Mg.展开更多
Lithium halide solid-state electrolytes,with the general formula of Li_(3±m)M_(n)X_(6),are regarded as the promising families of electrolyte material for all solid-state lithium-ion batteries because of the relat...Lithium halide solid-state electrolytes,with the general formula of Li_(3±m)M_(n)X_(6),are regarded as the promising families of electrolyte material for all solid-state lithium-ion batteries because of the relatively good ionic conductivity,high oxidative stability against high-voltage oxide cathodes,and broad electrochemical stability window[1].Here,M stands for one or multiple metal elements and X for one or multiple halogen elements.展开更多
Efficient conversion and synergistic solar energy utilization are critical for advancing low-carbon and sustainable development.In this study,two Pt(Ⅱ)-based metal/halogen-bonded organic frameworks(MXOFBen and MXOF-A...Efficient conversion and synergistic solar energy utilization are critical for advancing low-carbon and sustainable development.In this study,two Pt(Ⅱ)-based metal/halogen-bonded organic frameworks(MXOFBen and MXOF-Anth)were designed to enhance photoconversion efficiency and enable multifunctional integration.The ligand L-terpyr is formed by coupling tripyridine with diphenylamine dipyridine,in which the tripyridine effectively acts as a metal-ligand to lower the band gap and promote nonradiative leaps,thereby enhancing the photoconversion ability.Meanwhile,diphenylamine dipyridine serves as a[N…I^(+)…N]halogen-bonding acceptor,imparting superhydrophilicity to the materials and increasing carrier density,further improving photocatalytic performance.Experimental results demonstrate that these two MXOFs achieve impressive interfacial water evaporation efficiencies of up to87.8%and 94.0%,respectively.Additionally,the materials exhibit excellent performance in photothermal power generation and photocatalysis of H_(2)O_(2).Notably,the MXOFs also deliver strong overall performance in integrated systems combining interfacial water evaporation with photothermal power generation or photocatalysis,underscoring their exceptional photoconversion efficiency and multifunctional potential.This work introduces a novel strategy by incorporating metal-ligand and halogen bonds,offering a pathway to enhance photoconversion efficiency and develop versatile materials for advanced solar energy applications,thereby fostering the progress of high-efficiency solar energy conversion and multifunctional organic materials.展开更多
基金supported by NSFCs (41306199)the Dean Research Funds for CAS Hefei Institute (YZJJ201304)
文摘The reactive halogens play key roles in the destruction of boundary layer ozone by catalytic reactions and provide a fast pathway to the sedimentation of elemental gaseous mercury.The presence of bromine oxides in the lower
基金the National Key Research and Development Program of China(No.2019YFC1908400)the National Natural Science Foundation of China(Nos.52174334,52374413)+3 种基金the Jiangxi Provincial Cultivation Program for Academic and Technical Leaders of Major Subjects,China(Nos.20212BCJ23007,20212BCJL23052)the Jiangxi Provincial Natural Science Foundation,China(Nos.20224ACB214009,20224BAB214040)the Double Thousand Plan of Jiangxi Province,China(No.S2021GDQN2970)the Distinguished Professor Program of Jinggang Scholars in Institutions of Higher Learning of Jiangxi Province,China.
文摘The separation of halogens and recovery of heavy metals from secondary copper smelting(SCS)dust using a sulfating roasting−water leaching process were investigated.The thermodynamic analysis results confirm the feasibility of the phase transformation to metal sulfates and to gaseous HF and HCl.Under the sulfating roasting conditions of the roasting temperature of 250℃ and the sulfuric acid excess coefficient of 1.8,over 74 wt.%of F and 98 wt.%of Cl were volatilized into flue gas.Approximately 98.6 wt.%of Zn and 96.5 wt.%of Cu in the roasting product were dissolved into the leaching solution after the water leaching process,while the leaching efficiencies of Pb and Sn were only 0.12%and 0.22%,respectively.The mechanism studies indicate the pivotal effect of roasting temperature on the sulphation reactions from various metal species to metal sulfates and the salting out reactions from various metal halides to gaseous hydrogen halides.
基金supported by the Fundamental Research Funds for the Central Universities(FRF-TP-18-080A1)the National Natural Science Foundation of China(Grant Nos.42002076,41930427,41725009,U1603244)the Science and Technology Planning of Guangdong Province,China(2020B1212060055)。
文摘To constrain the ore-fluid source(s)of the Laoshankou Fe-Cu-Au deposit(Junggar orogen,NW China),we analyzed the fluid inclusion(FI)noble gas(Ar,Kr and Xe)and halogen(Cl,Br and I)compositions in the hydrothermal epidote and quartz.Four hypogene alteration/mineralization stages,including(I)pre-ore Ca-silicate,(II)early-ore amphibole-epidote-magnetite,(III)late-ore pyrite-chalcopyrite,and(IV)post-ore hydrothermal veining,have been identified at Laoshankou.Stage II FIs have salinity of 15.7 wt.%(NaCl eq.),I/Cl molar ratios of 75×10^(−6)-135×10^(−6),and Br/Cl molar ratios of 1.4×10^(−3)-2.1×10^(−3).The moderately-high seawatercorrected Br*/I ratios(0.5-1.5)and low 40ArE/Cl slope(-10−5)indicate the presence of sedimentary marine pore fluid,which was modified by seawater reacting with the Beitashan Fm.volcanic rocks.Stage III fluid is more saline than their stage II and IV counterparts,reaching up to 23.3 wt.%(NaCl+CaCl2 eq.)close to halite saturation(-26 wt.%).The fluid has I/Cl ratios of 75×10^(−6)-90×10^(−6) and Br/Cl ratios of 1.5×10^(−3)-1.8×10^(−3).Considering the increasing 40ArE/Cl trend toward bittern brine and the higher 36Ar content than air-saturated water(ASW),a bittern fluid source is inferred from seawater evaporation,which was modified by interaction with organic-rich marine sedimentary rocks.Stage IV FIs have lower temperature(110-228°C)and Br/Cl(0.90×10^(−3)-1.2×10^(−3)),but higher 36Ar content than ASW,indicative of dissolved evaporite or halite input.Considering also the lowδDfluid(−114‰to−144‰)andδ18Ofluid(2.1‰-3.5‰)values,meteoric water(with minor dissolved evaporites)likely dominated the stage IV fluid.The evaporites may have formed through continuous evaporation of the stage III surface-derived bittern.Involvement of non-magmatic fluids and different ore-fluid origins in stages II and III suggest that the ore-forming process was different from a typical magmatichydrothermal fluid-dominated skarn mineralization,which was previously proposed for Laoshankou.Our noble gas and halogen study at Laoshankou provide new insights on the fluid sources for the Paleozoic Fe−Cu(−Au)deposits in the Central Asian Orogenic Belt(CAOB),and our non-magmatic fluid source interpretation is consistent with the basin inversion setting for the mineralization.
基金support from the National Natural Science Fund for Distinguished Young Scholars of China(No.22025107)Shaanxi Fundamental Science Research Project for Chemistry&Biology(No.22JHZ003)the National Youth Top-notch Talent Support Program of China,Xi’an Key Laboratory of Functional Supramolecular Structure and Materials,and the FM&EM International Joint Laboratory of Northwest University。
文摘Conventionally,organic radicals adhere to the Aufbau principle,the energy level of the singly occupied molecular orbital(SOMO)is not below the highest occupied molecular orbital(HOMO),but somewhat abnormal phenomena have appeared recently.In this study,we introduce a novel strategy by incorporating unique NHC-Au-X units into a tris(2,4,6-trichlorophenyl)methyl(TTM)system to create metal-involved open-shell complexes,denoted as TTM-NHC-Au-X(X=I,Br,or Cl).Density-functional theory calculations were used to predict an inversion in the energy of the SOMO and highest doubly occupied molecular orbital(HOMO)of TTM-NHC-Au-I,which is supported by experimental results.Organometallic radicals TTM-NHC-Au-X demonstrated distinct properties with different coordinated halides.The radical behaviors have been investigated by EPR,UV-vis spectroscopy and cyclic voltammetry,additional structural information provided by structurally comparing related the precursor complexes given by X-ray crystallography.TTM-NHC-Au-I with SOMO-HOMO conversion(SHC)features a highly thermal decomposition temperature up to 305℃.Furthermore,the photostability of TTM-NHC-Au-I was found to be 75and 23 times greater than that of TTM-NHC-Au-Br and TTM-NHC-Au-Cl,respectively.These findings provide valuable insights into the structural and electronic design principles governing the occurrence of SOMO-HOMO conversion in open-shell systems.
基金supported by the Chinese National Science Fund for Distinguished Young Scholars to Dr.Gao Jian-Feng(42025301).
文摘The Dexing porphyry deposit is the largest porphyry Cu–Mo–Au deposit in South China.Biotite composition can record the physicochemical conditions and evolution history of magmatic-hydrothermal system.Biotite from the Dexing porphyry deposit could be divided to three types:primary magmatic biotite(Bi-M),hydrothermal altered magmatic biotite(Bi-A)and hydrothermal biotite(Bi-H).The temperature of Bi-M and Bi-H range from 719 to 767℃ and 690 to 727℃,respectively.Both magmatic and hydrothermal biotite have high Fe^(3+)/Fe^(2+)ratios(from 0.18 to 0.24)and XMgvalues(from 0.57 to 0.66),indicating a high oxygen fugacity.BiM has F lower than Bi-A and Bi-H(up to 0.26 wt%),but has Cl(Cl=0.18–0.30 wt%)similar to Bi-A and Bi-H(Cl=0.21–0.35 wt%),suggesting that high Cl/F ratios of early hydrothermal fluid may result from the exsolution from high Cl magma.From potassic alteration zone to phyllic and propylitic alteration zones,Cl decreases with increasing Cu,whereas F increases roughly.Therefore,Cl mostly originate from magma,but enrichment of F possibly results from reaction of fluids and Neoproterozoic strata.Negative correlation between Cl and Cu indicates that Cl might act as an important catalyst during Cu mineralization process.Biotite from Dexing has similar halogen compositions to other porphyry Cu-/Mo deposits in the world.Chlorine contents of hydrothermal fluid may be critical for Cu transportation and enrichment,while consumption of Cl would promote Cu deposition.
基金the National Natural Science Foundation of China(Grant Nos.51701180,51871201,U1802254)。
文摘The three halogen solids(Cl_(2),Br_(2),and I_(2))have the isostructural diatomic molecular phaseⅠwith a space group of Cmca at ambient pressure.At high pressure,they all go through an intermediate phaseⅤwith incommensurate structures before eventually dissociating into the monatomic phaseⅡ.However,a new structural transition between phaseⅠandⅤwith anomalous bond-length behavior was observed in bromine under pressure,which,so far,has not been confirmed in iodine and chlorine.Here,we perform first-principles calculations for iodine and chlorine.The new structural transition was predicted to be common to all three halogens under pressure.The transition pressures might be systematically underestimated by the imperfect van der Waals correction method,but they follow the order Cl_(2)>Br_(2)>I_(2),which is consistent with other pressure-induced structural transitions such as metallization and the molecular-to-monatomic transition.
文摘HALOGENS, as mineralizer elements, have been attracting ever increasing attention of geological workers inpetrogenetically experimental and ore-forming fluid geochemical studies. However, little research workhas been done on the contents, variation characteristics and significance of halogens in solid ores(rocks). It is found in the study of the Danzhai Hg-Au deposit that (i) variations in the contents ofhalogens and their distribution regularities in solid rocks and ores can shed light on the formation of thedeposit; and (ii) halogens can serve the function of indicator elements in search of buried orebodies. 1 Main characteristics of the ore
基金supported by the financial support from the National Research Foundation,Singapore,under its Singapore-China Joint Flagship Project(Clean Energy).
文摘Aqueous Zn-iodine batteries(ZIBs)face the formidable challenges towards practical implementation,including metal corrosion and rampant dendrite growth on the Zn anode side,and shuttle effect of polyiodide species from the cathode side.These challenges lead to poor cycle stability and severe self-discharge.From the fabrication and cost point of view,it is technologically more viable to deploy electrolyte engineering than electrode protection strategies.More importantly,a synchronous method for modulation of both cathode and anode is pivotal,which has been often neglected in prior studies.In this work,cationic poly(allylamine hydrochloride)(Pah^(+))is adopted as a low-cost dual-function electrolyte additive for ZIBs.We elaborate the synchronous effect by Pah^(+)in stabilizing Zn anode and immobilizing polyiodide anions.The fabricated Zn-iodine coin cell with Pah^(+)(ZnI_(2) loading:25 mg cm^(−2))stably cycles 1000 times at 1 C,and a single-layered 3.4 cm^(2) pouch cell(N/P ratio~1.5)with the same mass loading cycles over 300 times with insignificant capacity decay.
基金support from the National Natural Science Foundation of China(22209089,22178187)Natural Science Foundation of Shandong Province(ZR2022QB048,ZR2021MB006)+2 种基金Excellent Youth Science Foundation of Shandong Province(Overseas)(2023HWYQ-089)the Taishan Scholars Program of Shandong Province(tsqn201909091)Open Research Fund of School of Chemistry and Chemical Engineering,Henan Normal University.
文摘Aqueous zinc-halogen batteries are promising candidates for large-scale energy storage due to their abundant resources,intrinsic safety,and high theoretical capacity.Nevertheless,the uncontrollable zinc dendrite growth and spontaneous shuttle effect of active species have prohibited their practical implementation.Herein,a double-layered protective film based on zinc-ethylenediamine tetramethylene phosphonic acid(ZEA)artificial film and ZnF2-rich solid electrolyte interphase(SEI)layer has been successfully fabricated on the zinc metal anode via electrode/electrolyte synergistic optimization.The ZEA-based artificial film shows strong affinity for the ZnF2-rich SEI layer,therefore effectively suppressing the SEI breakage and facilitating the construction of double-layered protective film on the zinc metal anode.Such double-layered architecture not only modulates Zn2+flux and suppresses the zinc dendrite growth,but also blocks the direct contact between the metal anode and electrolyte,thus mitigating the corrosion from the active species.When employing optimized metal anodes and electrolytes,the as-developed zinc-(dual)halogen batteries present high areal capacity and satisfactory cycling stability.This work provides a new avenue for developing aqueous zinc-(dual)halogen batteries.
文摘The highly selective catalytic hydrogenation of halogenated nitroaromatics was achieved by employing Pd‑based catalysts that were co‑modified with organic and inorganic ligands.It was demonstrated that the catalysts contained Pd species in mixed valence states,with high valence Pd at the metal‑support interface and zero valence Pd at the metal surface.While the strong coordination of triphenylphosphine(PPh3)to Pd0 on the Pd surface prevents the adsorption of halogenated nitroaromatics and thus dehalogenation,the coordination of sodium metavanadate(NaVO3)to high‑valence Pd sites at the interface helps to activate H2 in a heterolytic pathway for the selective hydrogenation of nitro‑groups.The excellent catalytic performance of the interfacial active sites enables the selective hydrogenation of a wide range of halogenated nitroaromatics.
基金financially supported by the Natural Science Foundation of Shandong Province(No.ZR2023MB151)the Natural Science Foundation of Shandong Province for Excellent Young Scholars(No.ZR2022YQ13)+1 种基金the Science and Technology Special Project of Qingdao(No.24-1-8-xdny-18nsh)the Taishan Scholar Project of Shandong Province(No.tsqn202211159)
文摘The piezocatalytic characteristic of bismuth oxyhalides(BiOX,X=Cl,Br,and I) has been increasingly capturing interest for its potential in hydrogen evolution reaction(HER) through water splitting process.The performance regarding these piezocatalysts is closely related to the halogen element present in BiOX;yet,the specific influence mechanisms remain unclear.In this study,we prepared BiOX catalysts via a hydrothermal process and explored their piezocatalytic HER activities.Owing to the layered bismuth s tructure,the resulting sheet-like piezocatalysts can efficiently capture the mechanic stimulus and allow the robust piezoelectric field,contributing to the piezocatalytic operation.It demonstrates that the BiOBr achieves a remarkable piezocatalytic HER efficiency of 813 μmol g^(-1)h^(-1),outperforming BiOCl and BiOI.The density functional theory(DFT)calculation results reveal that the BiOBr with moderate halogen atom size and lattice layer spacing possesses the strongest piezoelectricity,which enhances the separation and transfer of electron-hole pairs.Meanwhile,the exposed Br atom layer facilitates a large Bader charge and a low surface Gibbs free energy(ΔG_(H)),enhancing charge transfer for hydrogen reduction at the solid-liquid surface,thereby increasing the HER efficiency.This research sheds light on the halogen-dependent piezocatalytic activity of BiOX catalysts,offering valuable insights for the development of high-performance piezocatalysts.
基金supported by the Beijing Institute of Technology Research Fund Program for Young Scholars and 21C Innovation Laboratory Contemporary Amperex Technology Co.,Limited,Ninde,352100,China(21C-OP-202314)。
文摘Heteroatom doping has emerged as a powerful strategy to optimize the catalytic and adsorption abilities of electrocatalysts by regulating the electronic structure,thereby enabling the development of efficient electrocatalysts for lithium-sulfur(Li-S)batteries.However,the correlation between the properties of doped atoms and adsorptio n-catalytic ability,as well as the interconnection between adsorption strength and catalytic activity,remains underexplored.Herein,we employed halogen atoms(F,Cl,and Br)with different electronegativities to dope nickel phosphide(Ni_(2)P),aiming to modulate the adsorption properties toward lithium polysulfides(LiPSs).We systematically explored the relationship between the electronegativity of the doping atoms and the adsorption strength,followed by exploring the connection between adsorption and catalytic capabilities.Combined experimental and theoretical analyses reveal that doping halogen atoms effectively strengthens d-p orbital hybridization between Ni atoms and S atoms,thereby enhancing LiPSs anchoring and conversion.Specifically,the chemical adsorption capability is enhanced as the electronegativity of the doped atoms increases.Moreover,the catalytic activity presents a volcano-like trend with the enhancement of adsorption performance,wherein the activity initially increases and subsequently diminishes.Therefore,Cl-doped Ni_(2)P with moderate chemisorption ability exhibits optimal redox kinetics in bidirectional sulfur conversion.Consequently,the Li-S batteries with Cl-Ni_(2)P-separators deliver a high-rate capacity of 790 mAh g^(-1)at 5 C and achieve a remarkable areal capacity of 7.36 mAh cm^(-2)under practical conditions(sulfur loading:7.10 mg cm^(-2);electrolyte/sulfur(E/S)ratio:5μL mg^(-1)).This work uncovers the significance of achieving a balance between adsorption and catalytic capabilities,offering insights into designing efficient electrocatalysts for lithium-sulfur batteries.
文摘Existing organic halide synthesis routes typically employ elemental halogens(X_(2),X=Cl or Br),leading to low atom economy and significant environmental pollution.In this work,we developed an atom efficient electrosynthesis and separation strategy for halogenation reagents—N-chlorosuccinimide(NCS)and N-bromosuccinimide(NBS)—at high current densities.Faradic efficiency(FE)of 91.0%and 81.3%was achieved for NCS and NBS generation on RuO_(x)/TiO_(2)/Ti in a batch cell,respectively.Electrosynthesis of NCS likely involves both heterogeneous catalytic and homogeneous tandem pathways,while NBS is likely formed in a Langmuir-Hinshelwood mechanism with a proton-coupled electron transfer as the rate-determining step.A coupled continuous electrocatalytic synthesis and in situ separation setup was developed for the efficient production of NCS and NBS,which yielded 0.77 g of NCS in 12000 s and 0.81 g of NBS in 15000 s,both with relative purity exceeding 95%.The halogenation of acetone using NCS and NBS enabled gram-scale production of the key intermediate in organic synthesis,1-halogenacetone,with over 95%recovery of succinimide.
基金supported by the National Natural Science Foundation of China(No.32061160476).
文摘Rice,a primary food staple for over half of the global population,is susceptible to environmental pollution.The presence of lipophilic halogenated contaminants,including halogenated polycyclic aromatic hydrocarbons(XPAHs),polychlorinated biphenyls(PCBs),organochlorine pesticides(OCPs),brominated flame retardants(BFRs),and polyfluoroalkyl substances(PFAS),has become a growing concern due to their potential health risks and environmental impact.This review focused on the research of lipophilic halogenated contaminants in rice.We summarized the physicochemical properties,toxicity profiles,and contamination levels in rice.Moreover,the strategies for reducing lipophilic halogenated contaminant levels in rice were summarized and proposed,such as phytoremediation and improved processing methods.These findings can provide a reference for the understanding and control of lipophilic halogenated contaminants during rice growing and processing,and therefore reduce the associated risks.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFB4200500)National Natural Science Foundation of China(NSFC,22379101 and 22422904)Sichuan Natural Science Foundation(2024NSFSC0001 and 2025ZNSFSC0960).
文摘Organic solar cells(OSCs)have emerged as promising candidates for next‐generation photovoltaics,yet traditional bulk heterojunction(BHJ)devices face inherent limitations in morphology control and phase separation.Layer‐by‐layer(LbL)processing with a p–i–n configuration offers an innovative solution by enabling precise control over donor–acceptor distribution and interfacial characteristics.Here,we systematically investigate nine halogen‐functionalized additives across three categories—methyl halides,thiophene halides,and benzene halides—for optimizing LbL device performance.These additives,distinguished by their diverse thermal properties and solid–liquid transformation capabilities below 100°C,are functionalized as both nucleation centers and morphology‐modulating plasticizers during thermal treatment.Among them,2‐bromo‐5‐iodothiophene(BIT)demonstrates superior performance through synergistic effects of its bromine–iodine combination and thiophene core in mediating donor–acceptor interactions.LbL devices processed with BIT achieve exceptional metrics in the PM6/L8‐BO system,including a open‐circuit voltage of 0.916 V,a short‐circuit current density of 27.12 mA cm−2,and an fill factor of 80.97%,resulting in an impressive power conversion efficiency of 20.12%.This study establishes a molecular design strategy for halogen‐functionalized additives that simultaneously optimizes both donor and acceptor layers while maintaining processing simplicity for potential industrial applications.
基金supported by the National Natural Science Foundation of China(No.52300005)China Postdoctoral Science Foundation(No.2023TQ0098)+5 种基金Heilongjiang Postdoctoral Fund(No.LBH-Z23175)Heilongjiang Touyan Innovation Team Program(No.HIT-SE-01)the Crossover Fund of Medical Engineering Science of Harbin Institute of Technology(No.IR2021107)the National Natural Science Foundation of International(Regional)Cooperation and Exchange Project(No.51961125104)the State Key Laboratory of Urban Water Resource and Environment(Harbin Institute of Technology)(No.2022TS15)the Ecological and Environmental Protection Research Project of Heilongjiang Province(No.HST2022ST006).
文摘Halogenated aromatic disinfection byproducts(DBPs)are gradually receiving attention due to their high detection frequency and usually higher toxicity than regulated DBPs.In this study,we established a solid phase extraction(SPE)-LC-MS/MS method to simultaneously trace analyze 59 halogenated aromatic DBPs.The limits of detection and limits of quantification of halogenated aromatic DBPs ranged from 0.03 to 135.23 ng/L and from 0.1 to 450.76 ng/L,respectively.The range of recoveries and relative standard deviation(RSD)in river water were between 72.41%to 119.54%and 1.86%to 16.03%,respectively.Therefore,this method can be used to accurately analyze trace levels of halogenated aromatic DBPs in drinking water.The occurrence and transformation of halogenated aromatic DBPs were explored based on this method.In the chlorinated simulated source water and chlorinated river water,20 and 45 halogenated aromatic DBPs were determined,respectively.The active halogen species(HOCl,HOBr,and HOI)first reacted with natural organic matter(NOM)to form halogenated aromatic DBPs.Then,chlorine further reacted with the halogenated aromatic DBPs to convert them into small-molecule halogenated aliphatic DBPs through oxidation,electrophilic substitution,and hydrolysis reaction,etc.In the chlorinated simulated source water,chlorinated river water,and tap water,the toxicity contribution of bromoacetic acids(Br-HAAs)accounted for themajority(>71.16%).Given that halogenated aromatic DBPs are intermediate products of halogenated aliphatic DBPs,controlling the formation of halogenated aromatic DBPs is beneficial in decreasing the formation of halogenated aliphatic DBPs,thereby diminishing the toxicity of drinking water.
基金supported by the National Natural Science Foundation of China(No.223B2306)the Innovation Capability Support Program of Shaanxi Province(2023-CX-TD-49)the Natural Science Basic Research Program of Shaanxi Province(2025JC-JCQN-043).
文摘The rovibrational spectra of thioanisole(TA)and its halogenated derivatives,3-fluorothioanisole(3FTA)and 3-chlorothioanisole(3ClTA),were measured using synchrotron-based Fourier transform infrared spectroscopy(FTIR)at the Canadian Light Source.Combined with density functional theory calculations,the stable structures and vibrational modes of TA,3FTA,and 3ClTA in their vibrational states were analyzed.The theoretical vibrational mode frequencies were corrected by simulating the rotational structure of a vibrational band.The contributions of the cis-and trans-isomers of 3FTA and 3ClTA to the FTIR spectra at 298 K were estimated using the Boltzmann distribution,revealing their coexistence in the experimental spectra.The results indicate that both fluorine and chlorine substitution significantly affect the vibrational modes,particularly in the benzene ring.Compared to TA,the FTIR spectra of 3FTA and 3ClTA show changes in the frequencies and intensities of some vibrational modes,with halogen substitution causing specific modes to shift to higher wavenumbers.A comparison of the FTIR spectra of TA,3FTA,and 3ClTA highlights the influence of halogen substitution on vibrational properties,emphasizing how the type and position of the substituent affect frequency shifts and spectral intensities.These findings provide deeper insights into how halogenation alters vibrational spectra,which is crucial for further spectral analysis and molecular structure determination.
基金Project (51201079) supported by the National Natural Science Foundation of ChinaProject (2012Z099) supported by the Scientific Research Fund of Department of Education of Yunnan Province,ChinaProject (KKSY201251033) supported by the Scientific Research Foundation for Introduced Talents of KMUST,China
文摘The adsorption of low-coverage of F and Cl adatoms on the Mg（0001） surface was investigated using first-principles calculations based on the density functional theory（DFT）.The stability of the（2×2） structures formed by halogen atoms adsorbed at different sites was determined.The difference between the adsorption of F and Cl on Mg（0001） surface was also discussed.The calculation results show that hollow sites are the energetically most favorable at the low-coverage.It can be concluded from the Mulliken charges and density of states that electrons transfer from the substrate Mg atoms to the adatoms,which leads to the formation of adsorbate bond and further causes the stronger interaction between Mg atom and adatom.The interaction between Cl and Mg atoms is weaker than the interaction between F and Mg.
文摘Lithium halide solid-state electrolytes,with the general formula of Li_(3±m)M_(n)X_(6),are regarded as the promising families of electrolyte material for all solid-state lithium-ion batteries because of the relatively good ionic conductivity,high oxidative stability against high-voltage oxide cathodes,and broad electrochemical stability window[1].Here,M stands for one or multiple metal elements and X for one or multiple halogen elements.
基金supported by the National Natural Science Foundation of China(Nos.22371218,21702153,52270070,and 21801194)the Wuhan Science and Technology Bureau(No.whkxjsj009)+1 种基金support of the Core Facility of Wuhan Universitythe Large-scale Instrument and Equipment Sharing Foundation of Wuhan University。
文摘Efficient conversion and synergistic solar energy utilization are critical for advancing low-carbon and sustainable development.In this study,two Pt(Ⅱ)-based metal/halogen-bonded organic frameworks(MXOFBen and MXOF-Anth)were designed to enhance photoconversion efficiency and enable multifunctional integration.The ligand L-terpyr is formed by coupling tripyridine with diphenylamine dipyridine,in which the tripyridine effectively acts as a metal-ligand to lower the band gap and promote nonradiative leaps,thereby enhancing the photoconversion ability.Meanwhile,diphenylamine dipyridine serves as a[N…I^(+)…N]halogen-bonding acceptor,imparting superhydrophilicity to the materials and increasing carrier density,further improving photocatalytic performance.Experimental results demonstrate that these two MXOFs achieve impressive interfacial water evaporation efficiencies of up to87.8%and 94.0%,respectively.Additionally,the materials exhibit excellent performance in photothermal power generation and photocatalysis of H_(2)O_(2).Notably,the MXOFs also deliver strong overall performance in integrated systems combining interfacial water evaporation with photothermal power generation or photocatalysis,underscoring their exceptional photoconversion efficiency and multifunctional potential.This work introduces a novel strategy by incorporating metal-ligand and halogen bonds,offering a pathway to enhance photoconversion efficiency and develop versatile materials for advanced solar energy applications,thereby fostering the progress of high-efficiency solar energy conversion and multifunctional organic materials.
