In order to study the effects of the process parameters on springback and section deformation, a sensitivity analysis model was established based on the combination use of the multi-parameter sensitivity analysis meth...In order to study the effects of the process parameters on springback and section deformation, a sensitivity analysis model was established based on the combination use of the multi-parameter sensitivity analysis method and the springback/section deformation prediction finite element model, and by using this model the sensitivities of the springback and the section deformation to process parameters were analyzed and compared. The results show that the most sensitive process conditions for springback angle are the boost speed and the pressure of pressure die, and the most sensitive process condition for section deformation is the number of cores. When the clamp force, the boost speed and the pressure of pressure die are utilized to control section deformation, the effect of these process parameters on springback should be considered. When the process parameters are mainly used to control springback, the effect of these process parameters on the section deformation should be always considered.展开更多
Different yield criterion has great difference in predicting the deformation of tube with different material.In order to improve the prediction accuracy of the cross-sectional deformation of the double-ridged rectangu...Different yield criterion has great difference in predicting the deformation of tube with different material.In order to improve the prediction accuracy of the cross-sectional deformation of the double-ridged rectangular tube(DRRT)during rotary draw bending(RDB)process,Mises isotropic yield criterion,Hill’48 and Barlat/Lian anisotropic yield criteria commonly used in practical engineering are introduced to simulate RDB of DRRT.The inverse method combining uniaxial tensile test of whole tube and response surface methodology was proposed to identify the parameters of Hill’48 and Barlat/Lian yield criteria of small-sized H96 brass extrusion DRRT as well.Then based on ABAQUS/Explicit platform,the FE models of RDB process of DRRT considering Mises,Hill’48 and Barlat/Lian yield criteria were built.The results show that:The variation trend of cross-sectional deformation ratio is same when using different yield criteria.The cross-sectional deformation ratio by using Mises yield criterion is close to that by using Hill’48 yield criterion.However,there is a quite difference between by using Barlat/Lian yield criterion and by using Mises or Hill’48 yield criteria.The prediction values of cross-sectional height deformation by using three yield criteria all underestimate the experiment ones,and the prediction values of cross-sectional width deformation overestimate the experiment ones.By comparing the simulation results of cross-sectional deformation of the DRRT with different yield criteria and experiment ones,Barlat/Lian yield criterion is found to be suitable for describing the RDB process of DRRT.展开更多
The bent double-ridged rectangular tube(DRRT)with high forming quality is helpful to improve the microwave transmission accuracy.For reducing the cross-sectional deformation in the H-typed bending process,in addition ...The bent double-ridged rectangular tube(DRRT)with high forming quality is helpful to improve the microwave transmission accuracy.For reducing the cross-sectional deformation in the H-typed bending process,in addition to using rigid mandrel to support the inside of tube,ridge groove fillers are also added to restrict the deformation of ridge grooves.Because of the change of stress and strain state of bent tube in bending,rigid mandrel retracting and specially twicespringback stages,and the springback of fillers,the cross-sectional deformation of tube in each stage may be different.Therefore,based on the ABAQUS platform,the finite element models(FEM)for H-typed bending,mandrel retracting and twice-springback stages of H96 DRRT with fillers were established and validated.It is found that,for the height and width deformation of tube and spacing deformation of ridge grooves,retraction of mandrel can make the distribution of these deformations more uniform along the bending direction.The first springback can reduce these deformations significantly,which should be emphasized.But the second springback only increases them by less amount,which can be ignored.The smaller height deformation of ridge groove and filler can be neglected.展开更多
The objective of this study is to improve the production of L-DOPA from fungal source like Aspergillus terreus that can be further used to large-scale commercial production of this important drug from microbial source...The objective of this study is to improve the production of L-DOPA from fungal source like Aspergillus terreus that can be further used to large-scale commercial production of this important drug from microbial sources. L-DOPA, a dopamine precursor that can pass the blood-brain barrier, is presently the drug of choice for Parkinson＇s disease. Microbial production and isolation of L-DOPA from natural sources is yet to be achieved an economical process. In this study, the mycelial pellets ofAspergillus terreus 104 were entrapped in 2% calcium alginate and were studied for their capacity for L-3, 4-dihydroxyphenylalanine production. Results showed that the immobilized pellets produced L-DOPA to the extent of 0.74 mg·G^-1 biomass while the free pellets produced 0.8 mg·G^-1 biomass. Further, storage of immobilized pellets for 96 h at 4 ℃ resulted in the reduction of the original L-DOPA producing activity of the gel beads only 40% and that of free pellets lost completely. In order to improve the production yield, further experiments were designed. It was found that L-DOPA production could be prolonged with repeated batch wise use of immobilized mycelial pellets in calcium alginate retaining 80% of their L-DOPA producing capacity for a period of 72 h while free pellets lost completely within 24 h. Results of this kind therefore is interesting and promising for commercial scale production of L-DOPA from microbial sources.展开更多
[Objectives] This study was conducted to investigate the toxic effects of 2,2',4,4',5,5'-hexabromobiphenyl ether on Chlorella vulgaris and provide basic data for protecting aquatic ecosystems. [Methods] Th...[Objectives] This study was conducted to investigate the toxic effects of 2,2',4,4',5,5'-hexabromobiphenyl ether on Chlorella vulgaris and provide basic data for protecting aquatic ecosystems. [Methods] The acute toxicity effects of 2,2',4,4',5,5'-hexabromodiphenyl ether on C. vulgaris was investigated by the semi-static water contacting acute toxicity method. [Results] The 48,72 and 96 h-EC(50) of 2,2',4,4',5,5'-hexabromodiphenyl ether to C. vulgaris were23. 58,18. 71 and 14. 75 μg/L,respectively,and the safe concentration of 2,2',4,4',5,5'-hexabromodiphenyl ether to C. vulgaris was 1. 475μg/L. For the water solubility of 2,2',4,4',5,5'-hexabromodiphenyl ether is extremely low( 1 μg/L),it could not cause the acute poisoning death of C. vulgaris. According to the grading standards for the assessment of the toxicity on algae,2,2',4,4',5,5'-hexabromodiphenyl ether was extremely highly toxic to C. vulgaris. [Conclusions]The extremely high toxicity of 2,2',4,4',5,5'-hexabromodiphenyl ether to C. vulgaris shows that it has heavy potential harm to aquatic ecosystems and the maximum residue limit standards of 2,2',4,4',5,5'-hexabromodiphenyl ether in water should be formulated to better protect aquatic ecosystems.展开更多
基金Project (50975235) supported by the National Natural Science Foundation of ChinaProject (B08040) supported by the 111 Project
文摘In order to study the effects of the process parameters on springback and section deformation, a sensitivity analysis model was established based on the combination use of the multi-parameter sensitivity analysis method and the springback/section deformation prediction finite element model, and by using this model the sensitivities of the springback and the section deformation to process parameters were analyzed and compared. The results show that the most sensitive process conditions for springback angle are the boost speed and the pressure of pressure die, and the most sensitive process condition for section deformation is the number of cores. When the clamp force, the boost speed and the pressure of pressure die are utilized to control section deformation, the effect of these process parameters on springback should be considered. When the process parameters are mainly used to control springback, the effect of these process parameters on the section deformation should be always considered.
基金supporting by the Science and Technology Project of Shenzhen of China(Nos.JCYJ20170306160003433 and JCYJ20180306171058717)the National Natural Science Foundation of China(No.51375392)。
文摘Different yield criterion has great difference in predicting the deformation of tube with different material.In order to improve the prediction accuracy of the cross-sectional deformation of the double-ridged rectangular tube(DRRT)during rotary draw bending(RDB)process,Mises isotropic yield criterion,Hill’48 and Barlat/Lian anisotropic yield criteria commonly used in practical engineering are introduced to simulate RDB of DRRT.The inverse method combining uniaxial tensile test of whole tube and response surface methodology was proposed to identify the parameters of Hill’48 and Barlat/Lian yield criteria of small-sized H96 brass extrusion DRRT as well.Then based on ABAQUS/Explicit platform,the FE models of RDB process of DRRT considering Mises,Hill’48 and Barlat/Lian yield criteria were built.The results show that:The variation trend of cross-sectional deformation ratio is same when using different yield criteria.The cross-sectional deformation ratio by using Mises yield criterion is close to that by using Hill’48 yield criterion.However,there is a quite difference between by using Barlat/Lian yield criterion and by using Mises or Hill’48 yield criteria.The prediction values of cross-sectional height deformation by using three yield criteria all underestimate the experiment ones,and the prediction values of cross-sectional width deformation overestimate the experiment ones.By comparing the simulation results of cross-sectional deformation of the DRRT with different yield criteria and experiment ones,Barlat/Lian yield criterion is found to be suitable for describing the RDB process of DRRT.
基金the Science,Technology and Innovation Commission of Shenzhen Municipality of China(Nos.JCYJ20170306160003433 and JCYJ20180306171058717)111 Project of China(No.B08040)for the support given to this research。
文摘The bent double-ridged rectangular tube(DRRT)with high forming quality is helpful to improve the microwave transmission accuracy.For reducing the cross-sectional deformation in the H-typed bending process,in addition to using rigid mandrel to support the inside of tube,ridge groove fillers are also added to restrict the deformation of ridge grooves.Because of the change of stress and strain state of bent tube in bending,rigid mandrel retracting and specially twicespringback stages,and the springback of fillers,the cross-sectional deformation of tube in each stage may be different.Therefore,based on the ABAQUS platform,the finite element models(FEM)for H-typed bending,mandrel retracting and twice-springback stages of H96 DRRT with fillers were established and validated.It is found that,for the height and width deformation of tube and spacing deformation of ridge grooves,retraction of mandrel can make the distribution of these deformations more uniform along the bending direction.The first springback can reduce these deformations significantly,which should be emphasized.But the second springback only increases them by less amount,which can be ignored.The smaller height deformation of ridge groove and filler can be neglected.
文摘The objective of this study is to improve the production of L-DOPA from fungal source like Aspergillus terreus that can be further used to large-scale commercial production of this important drug from microbial sources. L-DOPA, a dopamine precursor that can pass the blood-brain barrier, is presently the drug of choice for Parkinson＇s disease. Microbial production and isolation of L-DOPA from natural sources is yet to be achieved an economical process. In this study, the mycelial pellets ofAspergillus terreus 104 were entrapped in 2% calcium alginate and were studied for their capacity for L-3, 4-dihydroxyphenylalanine production. Results showed that the immobilized pellets produced L-DOPA to the extent of 0.74 mg·G^-1 biomass while the free pellets produced 0.8 mg·G^-1 biomass. Further, storage of immobilized pellets for 96 h at 4 ℃ resulted in the reduction of the original L-DOPA producing activity of the gel beads only 40% and that of free pellets lost completely. In order to improve the production yield, further experiments were designed. It was found that L-DOPA production could be prolonged with repeated batch wise use of immobilized mycelial pellets in calcium alginate retaining 80% of their L-DOPA producing capacity for a period of 72 h while free pellets lost completely within 24 h. Results of this kind therefore is interesting and promising for commercial scale production of L-DOPA from microbial sources.
基金Supported by Central Public-interest Scientific Institution Basal Research FundChinese Academy of Fishery Science (2017HY-ZD0208)China Agricultural Research System-Freshwater Fish (CARS-46)。
文摘[Objectives] This study was conducted to investigate the toxic effects of 2,2',4,4',5,5'-hexabromobiphenyl ether on Chlorella vulgaris and provide basic data for protecting aquatic ecosystems. [Methods] The acute toxicity effects of 2,2',4,4',5,5'-hexabromodiphenyl ether on C. vulgaris was investigated by the semi-static water contacting acute toxicity method. [Results] The 48,72 and 96 h-EC(50) of 2,2',4,4',5,5'-hexabromodiphenyl ether to C. vulgaris were23. 58,18. 71 and 14. 75 μg/L,respectively,and the safe concentration of 2,2',4,4',5,5'-hexabromodiphenyl ether to C. vulgaris was 1. 475μg/L. For the water solubility of 2,2',4,4',5,5'-hexabromodiphenyl ether is extremely low( 1 μg/L),it could not cause the acute poisoning death of C. vulgaris. According to the grading standards for the assessment of the toxicity on algae,2,2',4,4',5,5'-hexabromodiphenyl ether was extremely highly toxic to C. vulgaris. [Conclusions]The extremely high toxicity of 2,2',4,4',5,5'-hexabromodiphenyl ether to C. vulgaris shows that it has heavy potential harm to aquatic ecosystems and the maximum residue limit standards of 2,2',4,4',5,5'-hexabromodiphenyl ether in water should be formulated to better protect aquatic ecosystems.
