A new environmental friendly catalyst, H3PW6Mo6O40/TiO2 was prepared. The optimum conditions have been found, that is, mass ratio of m （TiO2）： m （H3PW6Mo6O40） is 1：2.0, volume of water is 30 mL, the reflux react...A new environmental friendly catalyst, H3PW6Mo6O40/TiO2 was prepared. The optimum conditions have been found, that is, mass ratio of m （TiO2）： m （H3PW6Mo6O40） is 1：2.0, volume of water is 30 mL, the reflux reaction time is 2 h, and activated temperature is 150 ℃. H3PW6Mo6O40/TiO2 was used as catalyst in catalytic synthesis ofacetals and ketals. Effects ofn （aldehyde（ketone））： n （glycol）, catalyst dosage and reaction time on yield were investigated. Optimal conditions were： n（aldehyde （ketone））： n （glycol）=1.0 ： 1.4; mass fraction of catalyst to reactants, 0.8%; reaction time, 1.0 h and cyclohexane as water-stripped reagent, 10 mL. Under these conditions, yields of acetals and ketals can reach 53.0% -86.9 0%展开更多
采用溶胶-凝胶法制备H3PW6Mo6O40/SiO2催化剂,以苯甲醛,乙酰乙酸乙酯和尿素为原料,无水乙醇为溶剂催化合成4-苯基-6-甲基-5-乙氧羰基-3,4-二氢嘧啶-2(H)-酮,研究结果表明:反应物的摩尔比、反应温度、催化剂用量和反应时间是影响4-苯基-6...采用溶胶-凝胶法制备H3PW6Mo6O40/SiO2催化剂,以苯甲醛,乙酰乙酸乙酯和尿素为原料,无水乙醇为溶剂催化合成4-苯基-6-甲基-5-乙氧羰基-3,4-二氢嘧啶-2(H)-酮,研究结果表明:反应物的摩尔比、反应温度、催化剂用量和反应时间是影响4-苯基-6-甲基-5-乙氧羰基-3,4-二氢嘧啶-2(H)-酮合成收率的重要因素.当n(苯甲醛)∶n(乙酰乙酸乙酯)∶n(尿素)=1.0∶1.2∶1.5,反应温度为90℃,催化剂的用量占反应物料总质量的1.5%,反应时间为75min时,产品收率可达70.3%.通过熔点、IR、1 H NMR和MS对合成目标化合物进行了表征确认.展开更多
以Cu_3(BTC)_2负载磷钨酸H_3PW_(12)O_(40)/Cu_3(BTC)_2催化剂催化,环己酮和乙二醇为原料合成环己酮乙二醇缩酮.探讨H_3PW_(12)O_(40)/Cu_3(BTC)_2对环己酮乙二醇缩酮的催化活性,较系统地研究了酮醇物质的量比、催化剂用量、带水剂用量...以Cu_3(BTC)_2负载磷钨酸H_3PW_(12)O_(40)/Cu_3(BTC)_2催化剂催化,环己酮和乙二醇为原料合成环己酮乙二醇缩酮.探讨H_3PW_(12)O_(40)/Cu_3(BTC)_2对环己酮乙二醇缩酮的催化活性,较系统地研究了酮醇物质的量比、催化剂用量、带水剂用量、反应时间等因素对产物收率的影响.实验表明:H_3PW_(12)O_(40)/Cu_3(BTC)_2是合成环己酮乙二醇缩酮的良好催化剂,在n(环己酮)∶n(乙二醇)=1∶1.4,催化剂用量占反应物料总质量0.6%,带水剂环己烷的用量为8 m L,反应时间45 min的最佳条件下,环己酮乙二醇缩酮的收率可达75.9%.展开更多
基金Acknowledgements： This work was financially supported by the Natural Science Foundation of Hubei Province, China （No. 2005ABA053） and the National Natural Science Foundation of China （No. 20471044）.
文摘A new environmental friendly catalyst, H3PW6Mo6O40/TiO2 was prepared. The optimum conditions have been found, that is, mass ratio of m （TiO2）： m （H3PW6Mo6O40） is 1：2.0, volume of water is 30 mL, the reflux reaction time is 2 h, and activated temperature is 150 ℃. H3PW6Mo6O40/TiO2 was used as catalyst in catalytic synthesis ofacetals and ketals. Effects ofn （aldehyde（ketone））： n （glycol）, catalyst dosage and reaction time on yield were investigated. Optimal conditions were： n（aldehyde （ketone））： n （glycol）=1.0 ： 1.4; mass fraction of catalyst to reactants, 0.8%; reaction time, 1.0 h and cyclohexane as water-stripped reagent, 10 mL. Under these conditions, yields of acetals and ketals can reach 53.0% -86.9 0%
文摘采用溶胶-凝胶法制备H3PW6Mo6O40/SiO2催化剂,以苯甲醛,乙酰乙酸乙酯和尿素为原料,无水乙醇为溶剂催化合成4-苯基-6-甲基-5-乙氧羰基-3,4-二氢嘧啶-2(H)-酮,研究结果表明:反应物的摩尔比、反应温度、催化剂用量和反应时间是影响4-苯基-6-甲基-5-乙氧羰基-3,4-二氢嘧啶-2(H)-酮合成收率的重要因素.当n(苯甲醛)∶n(乙酰乙酸乙酯)∶n(尿素)=1.0∶1.2∶1.5,反应温度为90℃,催化剂的用量占反应物料总质量的1.5%,反应时间为75min时,产品收率可达70.3%.通过熔点、IR、1 H NMR和MS对合成目标化合物进行了表征确认.
文摘以Cu_3(BTC)_2负载磷钨酸H_3PW_(12)O_(40)/Cu_3(BTC)_2催化剂催化,环己酮和乙二醇为原料合成环己酮乙二醇缩酮.探讨H_3PW_(12)O_(40)/Cu_3(BTC)_2对环己酮乙二醇缩酮的催化活性,较系统地研究了酮醇物质的量比、催化剂用量、带水剂用量、反应时间等因素对产物收率的影响.实验表明:H_3PW_(12)O_(40)/Cu_3(BTC)_2是合成环己酮乙二醇缩酮的良好催化剂,在n(环己酮)∶n(乙二醇)=1∶1.4,催化剂用量占反应物料总质量0.6%,带水剂环己烷的用量为8 m L,反应时间45 min的最佳条件下,环己酮乙二醇缩酮的收率可达75.9%.
