Low dark current photocathode guns are highly desired for high-brightness continuous-wave operations.Direct-current superconducting radio-frequency(DC-SRF)gun,a hybrid photocathode gun combining a DC gap and an SRF ca...Low dark current photocathode guns are highly desired for high-brightness continuous-wave operations.Direct-current superconducting radio-frequency(DC-SRF)gun,a hybrid photocathode gun combining a DC gap and an SRF cavity,effectively isolates the photocathode from the SRF cavity and offers significant advantages in terms of minimizing dark current levels.This paper presents an in-depth analysis of the dark current of a newly developed high-brightness DC-SRF photocathode gun(DC-SRF-Ⅱ gun).Particularly,a systematic experimental investigation of the dark current was conducted,and a comprehensive understanding of its formation was achieved through compliant simulations and measurements.Additionally,measures for attaining sub-nanoampere dark currents in the DC-SRF-Ⅱ gun are presented,including design considerations,cavity processing,assembly,and conditioning.The findings of this study establish a strong foundation for achieving high-performance operation of the DC-SRF-Ⅱ gun and provide a valuable reference for other photocathode guns.展开更多
Electron beam fluorescence technology is an advanced non-contact measurement in rarefied flow fields,and the fluorescence signal intensity is positively correlated with the electron beam current.The ion bombardment se...Electron beam fluorescence technology is an advanced non-contact measurement in rarefied flow fields,and the fluorescence signal intensity is positively correlated with the electron beam current.The ion bombardment secondary emission electron gun is suitable for the technology.To enhance the beam current,COMSOL simulations and analyses were conducted to examine plasma density distribution in the discharge chamber under the effects of various conditions and the electric field distribution between the cathode and the spacer gap.The anode shape and discharge pressure conditions were optimized to increase plasma density.Additionally,an improved spacer structure was designed with the dual purpose of enhancing the electric field distribution between the cathode-spacer gaps and improving vacuum differential effects.This design modification aims to increase the pass rate of secondary electrons.Both simulation and experimental results demonstrated that the performance of the optimized electron gun was effectively enhanced.When the electrode voltage remains constant and the discharge gas pressure is adjusted to around 8 Pa,the maximum beam current was increased from 0.9 mA to 1.6 mA.展开更多
Deep hole gun drilling is in a closed and semi-closed state,and the machining process is complex.The unstable drilling force,severe tool wear,and poor processing quality have always been difficulties in deep hole gun ...Deep hole gun drilling is in a closed and semi-closed state,and the machining process is complex.The unstable drilling force,severe tool wear,and poor processing quality have always been difficulties in deep hole gun drilling.304 stainless steel has good corrosion and heat resistance,and is widely used in various industries.However,high hardness,poor plasticity,and characteristics of sticking knives have always restricted its development in engineering applications.Therefore,this paper uses 304 stainless steel as the research object and performs process parameter optimization and tool wear experiments.Firstly,based on the optimization experiment of process parameters,the influence of cutting speed and feed rate on drlling force and hole wall roughness is analyzed.The process parameters of the subsequent experiment are optimized as follows:spindle speed is 1270r/mm,feed rate is 0.02 mm/r,and oil pressure is 3 MPa.Secondly,based on the tool wear experiment,the variation law of tool wear and tool wear form is studied.With the help of scanning electron microscopy(SEM)and energy dispersive spectroscopy(EDS),the tool wear mechanism of deep hole gun drilling 304 stainless steel is expounded.Finally,the influence of tool wearon the processing quality isrevealed,and the suggestion of tool regrinding is put forward.展开更多
The application of radiofrequency(RF)electron guns operating at cryogenic temperatures can enhance the performance of a photoinjector.The low emittance and increased brightness of the electron beams resulting from the...The application of radiofrequency(RF)electron guns operating at cryogenic temperatures can enhance the performance of a photoinjector.The low emittance and increased brightness of the electron beams resulting from the high gradient in the cryogenic photoinjector make it possible to improve the performance of new light sources.As an upgrading scheme for the Shanghai Soft X-ray Free-Electron Laser,this study explores a novel photocathode RF gun by introducing the TM_(02)mode into the cathode cell of a 2.6-cell electron gun,which improves the RF performance,particularly in terms of the monopole field.Furthermore,the optimized cathode cell with the TM_(02)mode can reduce the errors resulting from installation and decrease the dark current with alternative cathodes.In this study,the beam dynamics in a photoinjector were optimized using a 500-pC,5-ps beam,and its feasibility was examined.This paper presents the entire RF design process,including the adjustment of the RF structure,coupler design,local field,and multipole mode suppression to provide theoretical guidance for subsequent manufacturing and assembly.展开更多
A metallic glass coating with the composition of Fe51.33Cr14.9Mo25.67Y3.4C3.44B1.26 （mole fraction, %） on the Q235 stainless steel was developed by the detonation gun （D-gun） spraying process. The microstructure a...A metallic glass coating with the composition of Fe51.33Cr14.9Mo25.67Y3.4C3.44B1.26 （mole fraction, %） on the Q235 stainless steel was developed by the detonation gun （D-gun） spraying process. The microstructure and the phase aggregate were analyzed by scanning electron microscopy and X-ray diffractometry, respectively. Microhardness, wear resistance and corrosion behavior were assessed using a Vickers microhardness tester, a ball-on-disk wear testing machine and the electrochemical measurement method, respectively. Microstructural studies show that the coatings possess a densely layered structure with the porosity less than 2.1%. The tribological behavior of the coatings examined under dry conditions shows that their relative wear resistance is five times higher than that of the substrate material. Both adhesive wear and abrasive wear contribute to the friction, but the former is the dominant wear mechanism of the metallic glass coatings. The coatings exhibit low passive current density and extremely wide passive region in 3.5% NaCl solution, thus indicating excellent corrosion resistance.展开更多
Based on analyzing the limit of Ziolkowski＇s bubble oscillation formulation,a new model with various physical factors is established to simulate air gun signatures fo marine seismic exploration.The practical effects ...Based on analyzing the limit of Ziolkowski＇s bubble oscillation formulation,a new model with various physical factors is established to simulate air gun signatures fo marine seismic exploration.The practical effects of physical factors,such as heat transfe across the bubble wall,air gun port throttling,vertical rise of the bubble,fluid viscosity,and the existence of the air gun body were all taken into account in the new model.Compared with Ziolkowski＇s model,the signatures simulated by the new model,with small peak amplitude and rapid decay of bubble oscillation,are more consistent with actual signatures The experiment analysis indicates：（1）gun port throttling controls the peak amplitude of ai gun pulse;（2）since the hydrostatic pressure decreases when the bubble rises,the bubble oscillation period changes;（3）heat transfer and fluid viscosity are the main factors tha explain the bubble oscillation damping.展开更多
Microstructure, mechanical property and oxidation resistance of MCrAlYX coatings prepared by detonation gun (D-gun) and HVOF spraying were investigated. Lamellar microstructure and uniform microstructure formed in D-g...Microstructure, mechanical property and oxidation resistance of MCrAlYX coatings prepared by detonation gun (D-gun) and HVOF spraying were investigated. Lamellar microstructure and uniform microstructure formed in D-gun sprayed MCrAlYX coating and HVOF sprayed coating, respectively. Element redistribution and formation of new phase took place during the detonation process. Besides, the porosity of D-gun sprayed coating was much lower than that of HVOF sprayed coating. On the mechanical property, the micro-hardnesses of the two coatings were in the same level (~HV 910). However, D-gun sprayed MCrAlYX coating exhibited larger standard deviation of microhardness due to its lamellar microstructure, and exhibited better bend bonding strength owing to the existence of residual compressive stress between the layers and particles. Meanwhile, due to the much more compact microstructure, D-gun sprayed MCrAlYX coating showed superior oxidation resistance to the HVOF sprayed coating. The continuous dense protective layer can form earlier in D-gun sprayed coating and thus suppress further oxidation and control the oxide thickness at a relatively low level.展开更多
The feasibility of providing the tank a limited anti helicopter ability with gun launched missile is studied. A type of simulation model of gun launched missile against attack helicopters is established. The simula...The feasibility of providing the tank a limited anti helicopter ability with gun launched missile is studied. A type of simulation model of gun launched missile against attack helicopters is established. The simulation and the parameter optimization of missile control system under various circumstances are done. The gun launched missile can directly hit the helicopters in the typical tracks, all the missdistances are less than 1?m and the maximum overload is less than available overload. Gun launched missile is a feasible choice for tanks against attack helicopters.展开更多
This paper presents the results of a comparative investigation into the effects of the ignition method on the ballistic properties of a single-base gun propellant,as determined via closed vessel tests.Conventional gun...This paper presents the results of a comparative investigation into the effects of the ignition method on the ballistic properties of a single-base gun propellant,as determined via closed vessel tests.Conventional gunpowder ignition and plasma jet ignition methods were used,and differences in the ignition time were analysed.The influence of the ignition method on the dynamic vivacity is discussed.It is shown that this influence is significant in the first phase of the combustion process,and with respect to the low values of the loading density.In the second phase of the combustion process,and for large values of the loading density,the dynamic vivacity plots for the two ignition methods converge.Regarding the burning law,close values of the exponent were obtained for the two ignition methods.The dynamic vivacity plots determined for plasma ignition reveal stronger dependence on the loading density than those determined for gunpowder ignition.The conclusion is that plasma ignition is not a solution to the problems inherent to the process of determining the ballistic properties of propellants,which results in deviation of the burning process from the geometric burning law.展开更多
In order to study the excitation of large-volume airgun source with different combinations in Hutubi,Xinjiang,China,we conducted a targeted experiment.The method of timefrequency analysis is used to study the signals ...In order to study the excitation of large-volume airgun source with different combinations in Hutubi,Xinjiang,China,we conducted a targeted experiment.The method of timefrequency analysis is used to study the signals recorded by a seismometer on the shore of the excited pool,and it is concluded that different gun combinations will lead to different frequency of bubble pulse signals.Besides,linear combination method is used to analyze the signal-to-noise ratios of signals excited by different gun combinations which was recorded by seismic stations around the airgun source.In order to improve the signal-tonoise ratios,it is more effective to increase the activation energy(the number of excited guns at the same time)than to stack the excited signals with smaller energy repeatedly.展开更多
Through analyzing the near-field hydrophone records of the airgun experiment in the Jiemian reservoir,Fujian,we study the time-frequency characteristic of airgun source wavelet and the influence of gun depth and firin...Through analyzing the near-field hydrophone records of the airgun experiment in the Jiemian reservoir,Fujian,we study the time-frequency characteristic of airgun source wavelet and the influence of gun depth and firing pressure,and explain the process of bubble oscillation based on the Johnson( 1994) bubble model. The data analysis shows that:( 1) Airgun wavelet is composed of primary pulse and bubble pulse. The primary pulse,which is of large amplitude,short duration and wide frequency band,is usually used in shallow exploration. The bubble pulse,which is concentrated in the low-frequency range,is usually used in deep exploration with deep vertical penetration and far horizontal propagation.( 2) The variation of primary pulse amplitude with gun depth is very small,bubble pulse amplitude and the dominant frequency increase,and peak-bubble ratio and bubble period decrease. When the gun depth is 10 m,primary pulse amplitude and peakbubble ratio are maximum,which is suitable for shallow exploration; when gun depth is25 m,bubble pulse amplitude is large, and peak-bubble ratio is minimum, which is suitable for deep exploration.( 3) The primary pulse amplitude,bubble pulse amplitude,peak-bubble ratio,and bubble period increase and the dominant frequency decreases with increased firing pressure.展开更多
Distributed X-ray sources comprise a single vacuum chamber containing multiple X-ray sources that are triggered and emit X-rays at a specific time and location. This process facilitates an application for innovative s...Distributed X-ray sources comprise a single vacuum chamber containing multiple X-ray sources that are triggered and emit X-rays at a specific time and location. This process facilitates an application for innovative system concepts in X-ray and computer tomography. This paper proposes a novel electron beam focusing, shaping,and deflection electron gun for distributed X-ray sources.The electron gun uses a dispenser cathode as an electron emitter, a mesh grid to control emission current, and two electrostatic lenses for beam shaping, focusing, and deflection. Novel focusing and deflecting electrodes were designed to increase the number of focal spots in the distributed source. Two identical half-rectangle opening electrodes are controlled by adjusting the potential of the two electrodes to control the electron beam trajectory, and then, multifocal spots are obtained on the anode target. The electron gun can increase the spatial density of the distributed X-ray sources, thereby improving the image quality. The beam experimental results show that the focal spot sizes of the deflected(deflected amplitude 10.5 mm)and non-deflected electron beams at full width at half maximum are 0.80 mm 90.50 mm and 0.55 mm 90.40 mm, respectively(anode voltage 160 kV; beam current 30 mA). The imaging experimental results demonstrate the excellent spatial resolution and time resolution of an imaging system built with the sources, which has an excellent imaging effect on a field-programmable gate array chip and a rotating metal disk.展开更多
Amorphous metallic coatings with a composition of Fe48Cr15Mo14C15B6Y2 were prepared by detonation gun spraying process. Microstructural studies show that the coatings present a densely layered structure typical of the...Amorphous metallic coatings with a composition of Fe48Cr15Mo14C15B6Y2 were prepared by detonation gun spraying process. Microstructural studies show that the coatings present a densely layered structure typical of thermally sprayed deposits with the porosity below 2%. Both crystallization and oxidation occurred obviously during spraying process, so that the amorphous fraction of the coatings decreased to 54% compared with fully amorphous alloy ribbons of the same component. Corrosion behavior of the amorphous coatings was investigated by electrochemical measurement. The results show that the coatings exhibit extremely wide passive region and low passive current density in 3.5% NaCl (mass fraction) and 1 mol/L HCl solutions, which illustrates excellent ability to resist localized corrosion.展开更多
Gradiently denitrated gun propellant(GDGP)prepared by a“gradient denitration”strategy is obviously superior in progressive burning performance to the traditional deterred gun propellant.Currently,the preparation of ...Gradiently denitrated gun propellant(GDGP)prepared by a“gradient denitration”strategy is obviously superior in progressive burning performance to the traditional deterred gun propellant.Currently,the preparation of GDGP employed a tedious two-step method involving organic solvents,which hinders the large-scale preparation of GDGP.In this paper,GDGP was successfully prepared via a novelty and environmentally friendly one-step method.The obtained samples were characterized by FT-IR,Raman,SEM and XPS.The results showed that the content of nitrate groups gradiently increased from the surface to the core in the surface layer of GDGP and the surface layer of GDGP exhibited a higher compaction than that of raw gun propellant,with a well-preserved nitrocellulose structure.The denitration process enabled the propellant surface with regressive energy density and good progressive burning performance,as confirmed by oxygen bomb and closed bomb test.At the same time,the effects of different solvents on the component loss of propellant were compared.The result showed that water caused the least component loss.Finally,the stability of GDGP was confirmed by methyl-violet test.This work not only provided environmentally friendly,simple and economic preparation of GDGP,but also confirmed the stability of GDGP prepared by this method.展开更多
基金partially supported by the National Key Research and Development Program of China(Nos.2016YFA0401904 and 2017YFA0701001)the State Key Laboratory of Nuclear Physics and Technology,Peking University(Nos.NPT2022ZZ01).
文摘Low dark current photocathode guns are highly desired for high-brightness continuous-wave operations.Direct-current superconducting radio-frequency(DC-SRF)gun,a hybrid photocathode gun combining a DC gap and an SRF cavity,effectively isolates the photocathode from the SRF cavity and offers significant advantages in terms of minimizing dark current levels.This paper presents an in-depth analysis of the dark current of a newly developed high-brightness DC-SRF photocathode gun(DC-SRF-Ⅱ gun).Particularly,a systematic experimental investigation of the dark current was conducted,and a comprehensive understanding of its formation was achieved through compliant simulations and measurements.Additionally,measures for attaining sub-nanoampere dark currents in the DC-SRF-Ⅱ gun are presented,including design considerations,cavity processing,assembly,and conditioning.The findings of this study establish a strong foundation for achieving high-performance operation of the DC-SRF-Ⅱ gun and provide a valuable reference for other photocathode guns.
文摘Electron beam fluorescence technology is an advanced non-contact measurement in rarefied flow fields,and the fluorescence signal intensity is positively correlated with the electron beam current.The ion bombardment secondary emission electron gun is suitable for the technology.To enhance the beam current,COMSOL simulations and analyses were conducted to examine plasma density distribution in the discharge chamber under the effects of various conditions and the electric field distribution between the cathode and the spacer gap.The anode shape and discharge pressure conditions were optimized to increase plasma density.Additionally,an improved spacer structure was designed with the dual purpose of enhancing the electric field distribution between the cathode-spacer gaps and improving vacuum differential effects.This design modification aims to increase the pass rate of secondary electrons.Both simulation and experimental results demonstrated that the performance of the optimized electron gun was effectively enhanced.When the electrode voltage remains constant and the discharge gas pressure is adjusted to around 8 Pa,the maximum beam current was increased from 0.9 mA to 1.6 mA.
基金supported by the Natural Science Research of Jiangsu Higher Education Institutions of China(No.20KJA460005)Jiangsu Postgraduate Innovation Program(No.SJCX24_2156)Yancheng Key Research&Development(Industrial Support)Program(No.BE2023028).
文摘Deep hole gun drilling is in a closed and semi-closed state,and the machining process is complex.The unstable drilling force,severe tool wear,and poor processing quality have always been difficulties in deep hole gun drilling.304 stainless steel has good corrosion and heat resistance,and is widely used in various industries.However,high hardness,poor plasticity,and characteristics of sticking knives have always restricted its development in engineering applications.Therefore,this paper uses 304 stainless steel as the research object and performs process parameter optimization and tool wear experiments.Firstly,based on the optimization experiment of process parameters,the influence of cutting speed and feed rate on drlling force and hole wall roughness is analyzed.The process parameters of the subsequent experiment are optimized as follows:spindle speed is 1270r/mm,feed rate is 0.02 mm/r,and oil pressure is 3 MPa.Secondly,based on the tool wear experiment,the variation law of tool wear and tool wear form is studied.With the help of scanning electron microscopy(SEM)and energy dispersive spectroscopy(EDS),the tool wear mechanism of deep hole gun drilling 304 stainless steel is expounded.Finally,the influence of tool wearon the processing quality isrevealed,and the suggestion of tool regrinding is put forward.
基金supported by the National Natural Science Foundation of China(Nos.12222513 and 12405178)。
文摘The application of radiofrequency(RF)electron guns operating at cryogenic temperatures can enhance the performance of a photoinjector.The low emittance and increased brightness of the electron beams resulting from the high gradient in the cryogenic photoinjector make it possible to improve the performance of new light sources.As an upgrading scheme for the Shanghai Soft X-ray Free-Electron Laser,this study explores a novel photocathode RF gun by introducing the TM_(02)mode into the cathode cell of a 2.6-cell electron gun,which improves the RF performance,particularly in terms of the monopole field.Furthermore,the optimized cathode cell with the TM_(02)mode can reduce the errors resulting from installation and decrease the dark current with alternative cathodes.In this study,the beam dynamics in a photoinjector were optimized using a 500-pC,5-ps beam,and its feasibility was examined.This paper presents the entire RF design process,including the adjustment of the RF structure,coupler design,local field,and multipole mode suppression to provide theoretical guidance for subsequent manufacturing and assembly.
基金Project(51301205)supported by the National Natural Science Foundation of ChinaProject(20130162120001)supported by the Doctoral Program of Higher Education of China+2 种基金Project(K1502003-11)supported by the Changsha Municipal Major Science and Technology Program,ChinaProject(K1406012-11)supported by the Changsha Municipal Science and Technology Plan,ChinaProject(2016CX003)supported by the Innovation-driven Plan in Central South University,China
文摘A metallic glass coating with the composition of Fe51.33Cr14.9Mo25.67Y3.4C3.44B1.26 （mole fraction, %） on the Q235 stainless steel was developed by the detonation gun （D-gun） spraying process. The microstructure and the phase aggregate were analyzed by scanning electron microscopy and X-ray diffractometry, respectively. Microhardness, wear resistance and corrosion behavior were assessed using a Vickers microhardness tester, a ball-on-disk wear testing machine and the electrochemical measurement method, respectively. Microstructural studies show that the coatings possess a densely layered structure with the porosity less than 2.1%. The tribological behavior of the coatings examined under dry conditions shows that their relative wear resistance is five times higher than that of the substrate material. Both adhesive wear and abrasive wear contribute to the friction, but the former is the dominant wear mechanism of the metallic glass coatings. The coatings exhibit low passive current density and extremely wide passive region in 3.5% NaCl solution, thus indicating excellent corrosion resistance.
基金supported by the National 973 Program(Grant No.2007CB209608)National 863 Program(Grant No.2007AA06Z218)
文摘Based on analyzing the limit of Ziolkowski＇s bubble oscillation formulation,a new model with various physical factors is established to simulate air gun signatures fo marine seismic exploration.The practical effects of physical factors,such as heat transfe across the bubble wall,air gun port throttling,vertical rise of the bubble,fluid viscosity,and the existence of the air gun body were all taken into account in the new model.Compared with Ziolkowski＇s model,the signatures simulated by the new model,with small peak amplitude and rapid decay of bubble oscillation,are more consistent with actual signatures The experiment analysis indicates：（1）gun port throttling controls the peak amplitude of ai gun pulse;（2）since the hydrostatic pressure decreases when the bubble rises,the bubble oscillation period changes;（3）heat transfer and fluid viscosity are the main factors tha explain the bubble oscillation damping.
基金Project(51201156)supported by the National Natural Science Foundation of China
文摘Microstructure, mechanical property and oxidation resistance of MCrAlYX coatings prepared by detonation gun (D-gun) and HVOF spraying were investigated. Lamellar microstructure and uniform microstructure formed in D-gun sprayed MCrAlYX coating and HVOF sprayed coating, respectively. Element redistribution and formation of new phase took place during the detonation process. Besides, the porosity of D-gun sprayed coating was much lower than that of HVOF sprayed coating. On the mechanical property, the micro-hardnesses of the two coatings were in the same level (~HV 910). However, D-gun sprayed MCrAlYX coating exhibited larger standard deviation of microhardness due to its lamellar microstructure, and exhibited better bend bonding strength owing to the existence of residual compressive stress between the layers and particles. Meanwhile, due to the much more compact microstructure, D-gun sprayed MCrAlYX coating showed superior oxidation resistance to the HVOF sprayed coating. The continuous dense protective layer can form earlier in D-gun sprayed coating and thus suppress further oxidation and control the oxide thickness at a relatively low level.
文摘The feasibility of providing the tank a limited anti helicopter ability with gun launched missile is studied. A type of simulation model of gun launched missile against attack helicopters is established. The simulation and the parameter optimization of missile control system under various circumstances are done. The gun launched missile can directly hit the helicopters in the typical tracks, all the missdistances are less than 1?m and the maximum overload is less than available overload. Gun launched missile is a feasible choice for tanks against attack helicopters.
基金supported by the National Research Centre,Poland [grant number DOB-BIO8/05/01/2016]the Ministry of Defence of Poland [grant number GBMON/13-988/2018/WAT]
文摘This paper presents the results of a comparative investigation into the effects of the ignition method on the ballistic properties of a single-base gun propellant,as determined via closed vessel tests.Conventional gunpowder ignition and plasma jet ignition methods were used,and differences in the ignition time were analysed.The influence of the ignition method on the dynamic vivacity is discussed.It is shown that this influence is significant in the first phase of the combustion process,and with respect to the low values of the loading density.In the second phase of the combustion process,and for large values of the loading density,the dynamic vivacity plots for the two ignition methods converge.Regarding the burning law,close values of the exponent were obtained for the two ignition methods.The dynamic vivacity plots determined for plasma ignition reveal stronger dependence on the loading density than those determined for gunpowder ignition.The conclusion is that plasma ignition is not a solution to the problems inherent to the process of determining the ballistic properties of propellants,which results in deviation of the burning process from the geometric burning law.
基金the National Key R&D Program of China(2018YFC1503200)the National Natural Science Foundation of China(41474051)Earthquake Science Foundation of Xinjiang(201902)
文摘In order to study the excitation of large-volume airgun source with different combinations in Hutubi,Xinjiang,China,we conducted a targeted experiment.The method of timefrequency analysis is used to study the signals recorded by a seismometer on the shore of the excited pool,and it is concluded that different gun combinations will lead to different frequency of bubble pulse signals.Besides,linear combination method is used to analyze the signal-to-noise ratios of signals excited by different gun combinations which was recorded by seismic stations around the airgun source.In order to improve the signal-tonoise ratios,it is more effective to increase the activation energy(the number of excited guns at the same time)than to stack the excited signals with smaller energy repeatedly.
基金jointly sponsored the Special Fund for Earthquake Scientific Research of China Earthquake Administration(2015419015)the National Natural Sciences Foundation of China(41474071)
文摘Through analyzing the near-field hydrophone records of the airgun experiment in the Jiemian reservoir,Fujian,we study the time-frequency characteristic of airgun source wavelet and the influence of gun depth and firing pressure,and explain the process of bubble oscillation based on the Johnson( 1994) bubble model. The data analysis shows that:( 1) Airgun wavelet is composed of primary pulse and bubble pulse. The primary pulse,which is of large amplitude,short duration and wide frequency band,is usually used in shallow exploration. The bubble pulse,which is concentrated in the low-frequency range,is usually used in deep exploration with deep vertical penetration and far horizontal propagation.( 2) The variation of primary pulse amplitude with gun depth is very small,bubble pulse amplitude and the dominant frequency increase,and peak-bubble ratio and bubble period decrease. When the gun depth is 10 m,primary pulse amplitude and peakbubble ratio are maximum,which is suitable for shallow exploration; when gun depth is25 m,bubble pulse amplitude is large, and peak-bubble ratio is minimum, which is suitable for deep exploration.( 3) The primary pulse amplitude,bubble pulse amplitude,peak-bubble ratio,and bubble period increase and the dominant frequency decreases with increased firing pressure.
文摘Distributed X-ray sources comprise a single vacuum chamber containing multiple X-ray sources that are triggered and emit X-rays at a specific time and location. This process facilitates an application for innovative system concepts in X-ray and computer tomography. This paper proposes a novel electron beam focusing, shaping,and deflection electron gun for distributed X-ray sources.The electron gun uses a dispenser cathode as an electron emitter, a mesh grid to control emission current, and two electrostatic lenses for beam shaping, focusing, and deflection. Novel focusing and deflecting electrodes were designed to increase the number of focal spots in the distributed source. Two identical half-rectangle opening electrodes are controlled by adjusting the potential of the two electrodes to control the electron beam trajectory, and then, multifocal spots are obtained on the anode target. The electron gun can increase the spatial density of the distributed X-ray sources, thereby improving the image quality. The beam experimental results show that the focal spot sizes of the deflected(deflected amplitude 10.5 mm)and non-deflected electron beams at full width at half maximum are 0.80 mm 90.50 mm and 0.55 mm 90.40 mm, respectively(anode voltage 160 kV; beam current 30 mA). The imaging experimental results demonstrate the excellent spatial resolution and time resolution of an imaging system built with the sources, which has an excellent imaging effect on a field-programmable gate array chip and a rotating metal disk.
文摘Amorphous metallic coatings with a composition of Fe48Cr15Mo14C15B6Y2 were prepared by detonation gun spraying process. Microstructural studies show that the coatings present a densely layered structure typical of thermally sprayed deposits with the porosity below 2%. Both crystallization and oxidation occurred obviously during spraying process, so that the amorphous fraction of the coatings decreased to 54% compared with fully amorphous alloy ribbons of the same component. Corrosion behavior of the amorphous coatings was investigated by electrochemical measurement. The results show that the coatings exhibit extremely wide passive region and low passive current density in 3.5% NaCl (mass fraction) and 1 mol/L HCl solutions, which illustrates excellent ability to resist localized corrosion.
文摘Gradiently denitrated gun propellant(GDGP)prepared by a“gradient denitration”strategy is obviously superior in progressive burning performance to the traditional deterred gun propellant.Currently,the preparation of GDGP employed a tedious two-step method involving organic solvents,which hinders the large-scale preparation of GDGP.In this paper,GDGP was successfully prepared via a novelty and environmentally friendly one-step method.The obtained samples were characterized by FT-IR,Raman,SEM and XPS.The results showed that the content of nitrate groups gradiently increased from the surface to the core in the surface layer of GDGP and the surface layer of GDGP exhibited a higher compaction than that of raw gun propellant,with a well-preserved nitrocellulose structure.The denitration process enabled the propellant surface with regressive energy density and good progressive burning performance,as confirmed by oxygen bomb and closed bomb test.At the same time,the effects of different solvents on the component loss of propellant were compared.The result showed that water caused the least component loss.Finally,the stability of GDGP was confirmed by methyl-violet test.This work not only provided environmentally friendly,simple and economic preparation of GDGP,but also confirmed the stability of GDGP prepared by this method.
