The elementary task is to calculate the growth rates of disturbances when the e;method in transition prediction is performed. However, there is no unified knowledge to determine the growth rates of disturbances in thr...The elementary task is to calculate the growth rates of disturbances when the e;method in transition prediction is performed. However, there is no unified knowledge to determine the growth rates of disturbances in three-dimensional（3 D） flows. In this paper, we study the relation among the wave parameters of the disturbance in boundary layers in which the imaginary parts of wave parameters are far smaller than the real parts.The generalized growth rate（GGR） in the direction of group velocity is introduced, and the conservation relation of GGR is strictly deduced in theory. This conservation relation manifests that the GGR only depends on the real parts of wave parameters instead of the imaginary parts. Numerical validations for GGR conservation are also provided in the cases of first/second modes and crossflow modes. The application of GGR to the eN method in 3 D flows is discussed, and the puzzle of determining growth rates in 3 D flows is clarified. A convenient method is also proposed to calculate growth rates of disturbances in 3 D flows. Good agreement between this convenient method and existing methods is found except the condition that the angle between the group velocity direction and the x-direction is close to 90?which can be easily avoided in practical application.展开更多
The Monte- Carlo method is used to simulate the surface fatigue crack growth rate for offshore structural steel E36-Z35, and to determine the distributions and relevance of the parameters in the Paris equation. By thi...The Monte- Carlo method is used to simulate the surface fatigue crack growth rate for offshore structural steel E36-Z35, and to determine the distributions and relevance of the parameters in the Paris equation. By this method, the time and cost of fatigue crack propagation testing can be reduced. The application of the method is demonstrated by use of four sets of fatigue crack propagation data for offshore structural steel E36-Z35. A comparison of the test data with the theoretical prediction for surface crack growth rate shows the application of the simulation method to the fatigue crack propagation tests is successful.展开更多
Water biostability is of particular concern to water supply as a major limiting factor for heterotrophic bacterial growth in water distribution systems. This study focused on bacterial growth dynamics in the series di...Water biostability is of particular concern to water supply as a major limiting factor for heterotrophic bacterial growth in water distribution systems. This study focused on bacterial growth dynamics in the series dilution of water samples with TOC（total organic carbon） values determined beforehand. The results showed that the specific growth rate of Pseudomonas fluorescens P17 varied dramatically and irregularly with TOC value when TOC concentrations were low enough during the initial periods of incubation under given conditions. According to this relationship between bacterial growth rate and TOC, a dilution incubation method was designed for the study of water biostability. With the method under a given condition, a turning-point TOC value was found at a relatively fixed point in the curve between bacterial growth rate and TOC of water sample, and the variation of growth rate had different characteristics below the turning-point TOC value relative to that over this value. A turning-point TOC value similarly existed in all experiments not only with tap water, but also with acetate and mixed solutions. And in the dilution incubation method study, the affections were analyzed by condition factors such as inoculum amount,incubation time and nature of the organic carbon source. In very low organic carbon water environments, the variation characteristics of bacterial growth rate will be useful to further understand the meaning of water biostability.展开更多
Based on the standpoint to take for the crack size also to be a damage variable like the damage variable, by means of the two-directions coordinate system, several new calculation equations on the small crack gro...Based on the standpoint to take for the crack size also to be a damage variable like the damage variable, by means of the two-directions coordinate system, several new calculation equations on the small crack growth rate are suggested for describing the elastic-plastic behavior of some metallic materials. And the estimation formulas of life are also suggested relative to varied small crack size at each loading history, which is unsymmetric cyclic loading. In the calculation method, as a loaded stress-strain parameter to adopt the ratio with plastic strain range to elastic strain range, and as the material constants using the typical material parameters in damage calculation expression, a new concept of the compositive material constant, which has functional relation with the typical material constants, average stress, average strain, critical loading time is given out. In addition, the fatigue damage of a part of car is put up to calculate as an example, its calculation results are accordant with the Landgraf＇s equation, and calculation precision is more rigorous, so could avoid unnecessary fatigue tests and will be of practical significance on saving times, manpower and capitals, as well as the convenience for engineering applications.展开更多
Bangladesh is a densely populated country than many other countries of the world. The population growth is termed as alarming, however, knowledge of growth in the years to come would be useful in planning for the deve...Bangladesh is a densely populated country than many other countries of the world. The population growth is termed as alarming, however, knowledge of growth in the years to come would be useful in planning for the development of the country. This article is based on the projection of future population growth of the country. The available actual population census data during 1991-2011 of Bangladesh was applied to the application of a non-linear, non-autonomous ordinary differential equation familiar as Verhulst logistic population model with the maximum environmental capability of Bangladesh. Bangladesh will reach its carrying capacity of 245.09 million population in the next 56 years i.e. the year 2067 and then it decreases as S-shaped curve. The article has provided a focus on the changing trends of the growth of the population of Bangladesh.展开更多
Crack growth in particle reinforced composites is significantly influenced by the character of the reinforcement particles.To accurately deal with such problems,the extended finite element method （XFEM） was employed...Crack growth in particle reinforced composites is significantly influenced by the character of the reinforcement particles.To accurately deal with such problems,the extended finite element method （XFEM） was employed and improved.The simulations are accomplished by using a new domain expression of an interaction integral for evaluating stress intensity factors （SIFs）,and by adopting the maximum hoop stress criterion for crack-growth direction prediction.Crack deflection/attraction mechanisms and their associated energy release rate variations are investigated.It is shown that the applied numerical method allows a considerable flexibility and can be used in more general situations.The crack-tip shielding and amplifying behaviors are clearly observed.展开更多
A study of postbuckling and delamination propagation behavior in delaminated stiffened composite plates was presented. A methodology was proposed for simulating the multi-failure responses, such as initial and postbuc...A study of postbuckling and delamination propagation behavior in delaminated stiffened composite plates was presented. A methodology was proposed for simulating the multi-failure responses, such as initial and postbuckling, delamination onset and propagation, etc. A finite element analysis was conducted on the basis of the Mindlin first order shear effect theory and the von-Krmn nonlinear deformation assumption. The total energy release rate used as the criteria of delamination growth was estimated with virtual crack closure technique (VCCT). A self-adaptive grid moving technology was adopted to model the delamination growth process. Moreover, the contact effect along delamination front was also considered during the numerical simulation process. By some numerical examples, the influence of distribution and location of stiffener, configuration and size of the delamination, boundary condition and contact effect upon the delamination growth behavior of the stiffened composite plates were investigated. The method and numerical conclusion provided should be of great value to engineers dealing with composite structures.展开更多
基金Project supported by the National Natural Science Foundation of China(Nos.11672351 and11332007)the National Key R&D Plan(No.2016YFA0401200)the FengLei Youth Innovation Fund of China Aerodynamics Research and Development Center(No.KT-FLJJ-201803)
文摘The elementary task is to calculate the growth rates of disturbances when the e;method in transition prediction is performed. However, there is no unified knowledge to determine the growth rates of disturbances in three-dimensional（3 D） flows. In this paper, we study the relation among the wave parameters of the disturbance in boundary layers in which the imaginary parts of wave parameters are far smaller than the real parts.The generalized growth rate（GGR） in the direction of group velocity is introduced, and the conservation relation of GGR is strictly deduced in theory. This conservation relation manifests that the GGR only depends on the real parts of wave parameters instead of the imaginary parts. Numerical validations for GGR conservation are also provided in the cases of first/second modes and crossflow modes. The application of GGR to the eN method in 3 D flows is discussed, and the puzzle of determining growth rates in 3 D flows is clarified. A convenient method is also proposed to calculate growth rates of disturbances in 3 D flows. Good agreement between this convenient method and existing methods is found except the condition that the angle between the group velocity direction and the x-direction is close to 90?which can be easily avoided in practical application.
文摘The Monte- Carlo method is used to simulate the surface fatigue crack growth rate for offshore structural steel E36-Z35, and to determine the distributions and relevance of the parameters in the Paris equation. By this method, the time and cost of fatigue crack propagation testing can be reduced. The application of the method is demonstrated by use of four sets of fatigue crack propagation data for offshore structural steel E36-Z35. A comparison of the test data with the theoretical prediction for surface crack growth rate shows the application of the simulation method to the fatigue crack propagation tests is successful.
基金the National Natural Science Foundation of China for their financial support (No. 51378374)the Fundamental Research Funds for the Central Universities (No. 0400219207)
文摘Water biostability is of particular concern to water supply as a major limiting factor for heterotrophic bacterial growth in water distribution systems. This study focused on bacterial growth dynamics in the series dilution of water samples with TOC（total organic carbon） values determined beforehand. The results showed that the specific growth rate of Pseudomonas fluorescens P17 varied dramatically and irregularly with TOC value when TOC concentrations were low enough during the initial periods of incubation under given conditions. According to this relationship between bacterial growth rate and TOC, a dilution incubation method was designed for the study of water biostability. With the method under a given condition, a turning-point TOC value was found at a relatively fixed point in the curve between bacterial growth rate and TOC of water sample, and the variation of growth rate had different characteristics below the turning-point TOC value relative to that over this value. A turning-point TOC value similarly existed in all experiments not only with tap water, but also with acetate and mixed solutions. And in the dilution incubation method study, the affections were analyzed by condition factors such as inoculum amount,incubation time and nature of the organic carbon source. In very low organic carbon water environments, the variation characteristics of bacterial growth rate will be useful to further understand the meaning of water biostability.
文摘Based on the standpoint to take for the crack size also to be a damage variable like the damage variable, by means of the two-directions coordinate system, several new calculation equations on the small crack growth rate are suggested for describing the elastic-plastic behavior of some metallic materials. And the estimation formulas of life are also suggested relative to varied small crack size at each loading history, which is unsymmetric cyclic loading. In the calculation method, as a loaded stress-strain parameter to adopt the ratio with plastic strain range to elastic strain range, and as the material constants using the typical material parameters in damage calculation expression, a new concept of the compositive material constant, which has functional relation with the typical material constants, average stress, average strain, critical loading time is given out. In addition, the fatigue damage of a part of car is put up to calculate as an example, its calculation results are accordant with the Landgraf＇s equation, and calculation precision is more rigorous, so could avoid unnecessary fatigue tests and will be of practical significance on saving times, manpower and capitals, as well as the convenience for engineering applications.
文摘Bangladesh is a densely populated country than many other countries of the world. The population growth is termed as alarming, however, knowledge of growth in the years to come would be useful in planning for the development of the country. This article is based on the projection of future population growth of the country. The available actual population census data during 1991-2011 of Bangladesh was applied to the application of a non-linear, non-autonomous ordinary differential equation familiar as Verhulst logistic population model with the maximum environmental capability of Bangladesh. Bangladesh will reach its carrying capacity of 245.09 million population in the next 56 years i.e. the year 2067 and then it decreases as S-shaped curve. The article has provided a focus on the changing trends of the growth of the population of Bangladesh.
基金supported by the Program for New Century Excellent Talents in University (No. NCET-08-0152)the Program of Excellent Team in Harbin Institute of Technology
文摘Crack growth in particle reinforced composites is significantly influenced by the character of the reinforcement particles.To accurately deal with such problems,the extended finite element method （XFEM） was employed and improved.The simulations are accomplished by using a new domain expression of an interaction integral for evaluating stress intensity factors （SIFs）,and by adopting the maximum hoop stress criterion for crack-growth direction prediction.Crack deflection/attraction mechanisms and their associated energy release rate variations are investigated.It is shown that the applied numerical method allows a considerable flexibility and can be used in more general situations.The crack-tip shielding and amplifying behaviors are clearly observed.
文摘A study of postbuckling and delamination propagation behavior in delaminated stiffened composite plates was presented. A methodology was proposed for simulating the multi-failure responses, such as initial and postbuckling, delamination onset and propagation, etc. A finite element analysis was conducted on the basis of the Mindlin first order shear effect theory and the von-Krmn nonlinear deformation assumption. The total energy release rate used as the criteria of delamination growth was estimated with virtual crack closure technique (VCCT). A self-adaptive grid moving technology was adopted to model the delamination growth process. Moreover, the contact effect along delamination front was also considered during the numerical simulation process. By some numerical examples, the influence of distribution and location of stiffener, configuration and size of the delamination, boundary condition and contact effect upon the delamination growth behavior of the stiffened composite plates were investigated. The method and numerical conclusion provided should be of great value to engineers dealing with composite structures.
