The article provides substantiation of the choice of the quenching parametersfor the working zone of gin and linter grates and the quenchingparameters.The results of bench and industrial tests of the grate with aharde...The article provides substantiation of the choice of the quenching parametersfor the working zone of gin and linter grates and the quenchingparameters.The results of bench and industrial tests of the grate with ahardened working zone are also given.展开更多
A new type of 785 nm semiconductor laser device has been proposed.The thin cladding and mode expansion layer structure incorporated into the epitaxy on the p-side significantly impacts the regulation of grating etchin...A new type of 785 nm semiconductor laser device has been proposed.The thin cladding and mode expansion layer structure incorporated into the epitaxy on the p-side significantly impacts the regulation of grating etching depth.Thinning of the p-side waveguide layer makes the light field bias to the n-side cladding layer.By coordinating the confinement effect of the cladding layer,the light confinement factor on the p-side is regulated.On the other hand,the introduction of a mode expansion layer facilitates the expansion of the mode profile on the p side cladding layer.Both these factors contribute positively to reducing the grating etching depth.Compared to the reported epitaxial structures of symmetric waveguides,the new structure significantly reduces the etching depth of the grating while ensuring adequate reflection intensity and maintaining resonance.Moreover,to improve the output performance of the device,the new epitaxial structure has been optimized.Based on the traditional epitaxial structure,an energy release layer and an electron blocking layer are added to improve the electronic recombination efficiency.This improved structure has an output performance comparable to that of a symmetric waveguide,despite being able to have a smaller gain area.展开更多
Aiming at the requirement for high-precision tilt monitoring in the field of structural health monitoring(SHM),this paper proposes a sensitivity-enhanced tilt sensor based on a femtosecond fiber Bragg grating(FBG).Fir...Aiming at the requirement for high-precision tilt monitoring in the field of structural health monitoring(SHM),this paper proposes a sensitivity-enhanced tilt sensor based on a femtosecond fiber Bragg grating(FBG).Firstly,structural design of the tilt sensor was conducted based on static mechanics principles.By positioning the FBG away from the beam’s neutral axis,linear strain enhancement in the FBG was achieved,thereby improving sensor sensitivity.The relationship between FBG strain,applied force,and the offset distance from the neutral axis was established,determining the optimal distance corresponding to maximum strain.Based on this optimization scheme,a prototype of the tilt sensor was designed,fabricated,and experimentally tested.Experimental results show that the FBG offset distance yielding maximum sensitivity is 4.4 mm.Within a tilt angle range of−30°to 30°,the sensor achieved a sensitivity of 129.95 pm/°and a linearity of 0.9997.Compared to conventional FBG-based tilt sensors,both sensitivity and linearity were significantly improved.Furthermore,the sensor demonstrated excellent repeatability(error<0.94%),creep resistance(error<0.30%),and temperature stability(error<0.90%).These results demonstrate the sensor’s excellent potential for SHM applications.The sensor has been successfully deployed in an underground pipeline project,conducting long-term monitoring of tilt and deformation in the steel support structures,further proving its value for engineering safety monitoring.展开更多
Long-period fiber gratings have the advantages of small size,corrosion resistance,anti-electro-magnetic interference,and high sensitivity,making them widely used in biomedicine,the power industry,and aerospace.This pa...Long-period fiber gratings have the advantages of small size,corrosion resistance,anti-electro-magnetic interference,and high sensitivity,making them widely used in biomedicine,the power industry,and aerospace.This paper develops a long-period fiber grating sensor based on periodic microchannels.First,a series of linear structures were etched in the cladding of a single-mode fiber by femtosecond laser microma-chining.Then,the laser-modified region was selectively eroded by selective chemical etching to obtain the periodic microchannel structure.Finally,the channels were filled with polydimethylsiloxane(PDMS)to im-prove the spectral quality.The experimental results show that the sensor has good sensitivity in the measure-ment of various parameters such as temperature,stress,refractive index(RI),and bending.It has a temperat-ure sensitivity of−55.19 pm/℃,a strain sensitivity of−3.19 pm/με,a maximum refractive index sensitivity of 540.28 nm/RIU,and a bending sensitivity of 2.65 dB/m^(-1).All of the measurement parameters show good lin-ear responses.The sensor has strong application prospects in the field of precision measurement and sensing.展开更多
A 16-channel arrayed waveguide grating(AWG)with an 800 GHz channel spacing in the O-band has been developed and fabricated based on silica planar lightwave circuit(PLC)technology.By extending the wave⁃length allocatio...A 16-channel arrayed waveguide grating(AWG)with an 800 GHz channel spacing in the O-band has been developed and fabricated based on silica planar lightwave circuit(PLC)technology.By extending the wave⁃length allocation from 8 channels to 16 channels as specified in IEEE 802.3bs,we increased the number of chan⁃nels and boosted transmission capacity to meet the 1.6 Tbps and higher-speed signal transmission requirements for future data centers.Through optimizing the AWG structure,it has achieved insertion loss(IL)better than-1.61 dB,loss uniformity below 0.35 dB,polarization-dependent loss(PDL)below 0.35 dB,adjacent channel cross⁃talk under-20.05 dB,ripple less than 0.75 dB,center wavelength offset under 0.22 nm and 1 dB bandwidth ex⁃ceeding 2.88 nm.The AWG has been successfully measured to transmit 53 Gbaud 4-level pulse amplitude modu⁃lation(PAM4)signal per channel and the total transmission speed can reach over 1.6 Tbps.展开更多
The cleaning of gases with low concentrations of small ferromagnetic or paramagnetic particles is a difficult task for conventional filtration. A new alternative procedure, magnetic filtration, is used in this work. ...The cleaning of gases with low concentrations of small ferromagnetic or paramagnetic particles is a difficult task for conventional filtration. A new alternative procedure, magnetic filtration, is used in this work. Iron oxide aerosol was generated by elutriation of iron oxide particles from a fluidized bed consisting of a mixture of Geldart-C iron oxide powder and large spherical Geldart-B sand particles. The aerosol was filtered by means of a magnetic filter which consisted of one, two or three iron grates staggered to each other. The experimental installation contained also an isokinetic sampling system and a Microtrac SRA 150 Particle Analyser. A theoretical expression for filtration efficiency was deduced from a previous model taking into account the different forces acting on the iron oxide particles. Experimental filtration efficiency matches quite well calculated theoretical efficiency. It was found that an increase in particle size, in thee number of grates or in the applied magnetic field produced higher filtration efficiencies up to 100% in some cases. In all filtration experiments pressure drop through the magnetic filter was very small.展开更多
Metal micro-nano grating has received much attention due to its ability to provide high-efficiency light absorption.However,the current research scales of these metal gratings are focused on subwavelengths,and little ...Metal micro-nano grating has received much attention due to its ability to provide high-efficiency light absorption.However,the current research scales of these metal gratings are focused on subwavelengths,and little attention has been paid to the absorption properties of metal gratings at other scales.We investigate the absorption properties of metal gratings based on surface plasmon resonance(SPR)across the scales from superwavelength to subwavelength.Under grazing incidence,we observe continuous strong absorption phenomena from superwavelength to subwavelength Al triangle-groove gratings(TGGs).Perfect absorption is realized at the subwavelength scale,whereas the maximum absorption at all other scales exceeds 74%.The electric field distribution gives the mechanism of the strong absorption phenomenon attributed to SPR on the surface of Al TGGs at different scales.In particular,subwavelength Al TGGs have perfectly symmetric absorption properties for different blaze angles,and the symmetry is gradually broken as the grating period’s scale increases.Furthermore,taking Al gratings with varying groove shapes for example,we extend the equivalence rule of grating grooves to subwavelength from near-wavelength and explain the symmetric absorption properties in Al TGGs.We unify the research of metal grating absorbers outside the subwavelength scale to a certain extent,and these findings also open new perspectives for the design of metal gratings in the future.展开更多
With the advantage of high light intensity due to low scatting, structural colors generated by metallic diffraction nanograting structures, used as a type of diffractive optical element, have shown great potential for...With the advantage of high light intensity due to low scatting, structural colors generated by metallic diffraction nanograting structures, used as a type of diffractive optical element, have shown great potential for application in industrial and scientific research fields such as optical anti-counterfeiting and sensors. Within the visible light wavelength range, the diffraction performance is highly dependent on the height and shape consistencies of the nanograting. However, there is still room for the improvement in the flexible control over structure formation through mechanical nanomachining within this scale. The novelty of this paper lies in proposing a machining strategy for nanograting structures with variable heights through precise regulation of the revolving trajectory using tip-based nano down-milling. It explores how different geometric features of trajectories impact the amount of material deformed into a grating and its distribution shape, referred to as undeformed grating area. By analyzing the forming mechanisms of nanogratings under various trajectories with finite element simulation, the desired undeformed grating area is successfully achieved, which is mainly extruded by the tip flank face to form the right facet of the grating, resulting in a small deformation degree and a high deformation efficiency. Three distinct types of revolving trajectories are filtered out according to five quantitative evaluation indicators for machining performance, namely material plastic deformation, grating profile consistency, grating height consistency, machining forces, and area transforming height, and then are compared in processing nanogratings with different heights. It is obtained that only by regulating the vertical vibration amplitude of the revolving trajectory, the semicircle trajectory with the optimal geometric features has the ability to machine high-quality nanograting structures with a continuous height variation of up to 220 nm in a spacing of 400 nm.展开更多
There is limited amount of research on surface plasmon resonance(SPR)sensors with self-referencing capabilities which are based on dielectric gratings.In the short-wavelength range,a metal grating sensor is capable of...There is limited amount of research on surface plasmon resonance(SPR)sensors with self-referencing capabilities which are based on dielectric gratings.In the short-wavelength range,a metal grating sensor is capable of simultaneously measuring liquid refractive index under proposed temperature.A fabricated gold grating is placed on one side of a thin gold film for refractive index measurement,while the other with polydimethylsiloxane(PDMS)is deposited on the other side for temperature measurement.We use finite element analysis to research its sensing characteristics.Due to the high refractive index sensitivity of SPR sensors and thermo-optic coefficient of PDMS,we discovered the maximum spectral sensitivity of the sensor is 564 nm/RIU and-50 pm/℃when the liquid refractive index ranges from 1.30 to 1.40 with temperature ranging from 0℃ to 100℃.Numerical results indicate that there may not be mutual interference between two channels for measuring refractive index and temperature,which reduces the complexity of sensor measurements.展开更多
We proposed and demonstrated the ultra-compact 1310/1550 nm wavelength multiplexer/demultiplexer assisted by subwavelength grating(SWG)using particle swarm optimization(PSO)algorithm in silicon-on-insulator(SOI)platfo...We proposed and demonstrated the ultra-compact 1310/1550 nm wavelength multiplexer/demultiplexer assisted by subwavelength grating(SWG)using particle swarm optimization(PSO)algorithm in silicon-on-insulator(SOI)platform.Through the self-imaging effect of multimode interference(MMI)coupler,the demultiplexing function for 1310 nm and 1550 nm wavelengths is implemented.After that,three parallel SWG-based slots are inserted into the MMI section so that the effective refractive index of the modes can be engineered and thus the beat length can be adjusted.Importantly,these three SWG slots significantly reduce the length of the device,which is much shorter than the length of traditional MMI-based wavelength demultiplexers.Ultimately,by using the PSO algorithm,the equivalent refractive index and width of the SWG in a certain range are optimized to achieve the best performance of the wavelength demultiplexer.It has been verified that the device footprint is only 2×30.68μm^(2),and 1 dB bandwidths of larger than 120 nm are acquired at 1310 nm and 1550 nm wavelengths.Meanwhile,the transmitted spectrum shows that the insertion loss(IL)values are below 0.47 dB at both wavelengths when the extinction ratio(ER)values are above 12.65 dB.This inverse design approach has been proved to be efficient in increasing bandwidth and reducing device length.展开更多
The compressive strength of the pellets is a key indicator that determines the production efficiency in straight grate.It usually relies on manual sampling and testing,which is cumbersome and inefficient.To address th...The compressive strength of the pellets is a key indicator that determines the production efficiency in straight grate.It usually relies on manual sampling and testing,which is cumbersome and inefficient.To address this,a time series prediction model for pellet compressive strength was developed,combining a gradient boosting decision tree with a temporal convolutional network(GBDT-TCN).Firstly,the key physical characteristics of the pellet production process were established through the feature construction method,and then the multicollinear features were eliminated based on the Spearman correlation coefficient.The final selection of feature parameters,amounting to 9,was determined using recursive feature elimination(RFE)method.Finally,the GBDT algorithm was used to establish the nonlinear relationship between these features and the compressive strength.The GBDT prediction results and process data were constructed into a time series dataset,which was input into the TCN unit cascade model.The time series information was captured through the distribution coefficient of the loss function in the time series.Results illustrate that the GBDT-TCN method proposed performs well in the task of predicting the compressive strength of pellets.Compared with the prediction model using only GBDT,the accuracy within±100 N is increased from 83.33%to 90.00%.展开更多
A compact and highly sensitive gas pressure and temperature sensor based on Fabry-Pérot interferometer(FPI)and fiber Bragg grating(FBG)is proposed and demonstrated experimentally in this paper.The theoretical mod...A compact and highly sensitive gas pressure and temperature sensor based on Fabry-Pérot interferometer(FPI)and fiber Bragg grating(FBG)is proposed and demonstrated experimentally in this paper.The theoretical model for pressure and temperature sensing is established.Building on this foundation,a novel micro silicon cavity sensor structure sensitive to pressure is devised downstream of an FBG.The concept of separate measurement and the mechanisms enhancing pressure sensitivity are meticulously analyzed,and the corresponding samples are fabricated.The experimental results indicate that the pressure sensitivity of the sensor is-747.849 nm/MPa in 0—100 k Pa and its linearity is 99.7%and it maintains good stability in 150 min.The sensor offers the advantages of compact size,robust construction,easy fabrication,and high sensitivity,making it potentially valuable for micro-pressure application.展开更多
Metasurfaces composed of two-dimensional nanopillar arrays can manipulate light fields in desirable ways and exhibit the unique advantage of beam steering.Here,we experimentally demonstrate a metasurface-based wide-an...Metasurfaces composed of two-dimensional nanopillar arrays can manipulate light fields in desirable ways and exhibit the unique advantage of beam steering.Here,we experimentally demonstrate a metasurface-based wide-angle broadband all-dielectric blazed grating with an extreme incident angle of up to 80°,which is achieved by optimizing the wide-angle phase shifts and transmissivities of the unit cells.It exhibits a maximum diffraction efficiency of 72%and a high average efficiency of 64%over a wide range of incident angles from−80° to 45° at 1.55μm.Moreover,the proposed grating has a broad bandwidth of 200 nm(1.45-1.65μm),and average efficiencies of more than 50%can be achieved experimentally over the same incidence angles.Our results may pave the way for the creation of novel and efficient flat optical devices for wavefront control.展开更多
In response to the shortcomings of the common encoders in the industry,of which the photoelectric encoders have a poor anti-interference ability in harsh industrial environments with water,oil,dust,or strong vibration...In response to the shortcomings of the common encoders in the industry,of which the photoelectric encoders have a poor anti-interference ability in harsh industrial environments with water,oil,dust,or strong vibrations and the magnetic encoders are too sensitive to magnetic field density,this paper designs a new differential encoder based on the grating eddy-current measurement principle,abbreviated as differential grating eddy-current encoder(DGECE).The grating eddy-current of DGECE consists of a circular array of trapezoidal reflection conductors and 16 trapezoidal coils with a special structure to form a differential relationship,which are respectively located on the code plate and the readout plate designed by a printed circuit board.The differential structure of DGECE corrects the common mode interference and the amplitude distortion due to the assembly to some extent,possesses a certain anti-interference capability,and greatly simplifies the regularization algorithm of the original data.By means of the corresponding readout circuit and demodulation algorithm,the DGECE can convert the periodic impedance variation of 16 coils into an angular output within the 360°cycle.Due to its simple manufacturing process and certain interference immunity,DGECE is easy to be integrated and mass-produced as well as applicable in the industrial spindles,especially in robot joints.This paper presents the measurement principle,implementation methods,and results of the experiment of the DGECE.The experimental results show that the accuracy of the DGECE can reach 0.237%and the measurement standard deviation can reach±0.14°within360°cycle.展开更多
Purpose–To address the encapsulation challenge of fiber Bragg grating(FBG)sensors in complex railway environments,this paper designs a clip-on composite sensor enabling installation-friendly deployment and long-term ...Purpose–To address the encapsulation challenge of fiber Bragg grating(FBG)sensors in complex railway environments,this paper designs a clip-on composite sensor enabling installation-friendly deployment and long-term axle counting system monitoring.Design/methodology/approach–Wheel–rail mechanical behavior was simulated via finite element analysis(FEA)to determine optimal sensor placement.A clip-on composite sensor was subsequently engineered.Stress transduction efficacy was validated through FEA quantification of stress responses at the axle counter location.Findings–The proposed FBG axle counter integrates temperature compensation and anti-detachment monitoring as well as advantages such as simplified installation with minimal maintenance and sustained operational reliability.It effectively transmits stress,yielding a measured strain of 39μe under static loading conditions without sensitivity-enhancing elements.Originality/value–This study performs FEA of wheel-rail stress distribution and engineers the dual-slot composite sensor,FEAwas conducted to quantify the stress magnitude at the axle sensor position of the dual-slot composite sensor.Additionally,FEA was performed on sensors with different structural configurations,including adjustments to the axle sensor position,number of slots and axle position.The results confirmed that the designed composite sensor exhibits superior stress transfer characteristics.展开更多
Research on supercontinuum sources on silicon has made significant progress in the past few decades.However,conventional approaches to broaden the spectral bandwidth often rely on complex and critical dispersion engin...Research on supercontinuum sources on silicon has made significant progress in the past few decades.However,conventional approaches to broaden the spectral bandwidth often rely on complex and critical dispersion engineering by optimizing the core thickness or introducing the cladding with special materials and structures.We propose and demonstrate supercontinuum generation using long-periodgrating(LPG)waveguides on silicon with a C-band pump.The LPG waveguide is introduced for quasi-phase matching,and the generated supercontinuum spectrum is improved greatly with grating-induced dispersive waves.In addition,the demonstrated LPG waveguide shows a low propagation loss comparable with regular silicon photonic waveguides without gratings.In experiments,when using a 1550-nm 75-fs pulse pump with a pulse energy of 200 pJ,the supercontinuum spectrum generated with the present LPG waveguide shows an ultrabroad extent from 1150 to 2300 nm,which is much wider by 200 nm than that achieved by dispersionengineered uniform silicon photonic waveguides on the same chip.This provides a promising option for on-chip broadband light source for silicon photonic systems.展开更多
Food security has been an issue of global concern and this has attracted a lot of research interest. Cassava is an extremely popular crop and is becoming the cornerstone for addressing food security in many parts of t...Food security has been an issue of global concern and this has attracted a lot of research interest. Cassava is an extremely popular crop and is becoming the cornerstone for addressing food security in many parts of the world. The competing needs for cassava cuts across both human and animal consumption. It serves as a raw material in textile industry and is now one of the preferred materials for making biofuels. As the world’s population continues to grow, the demand for drought resistant crops such as cassava is increasing. The high demand for various forms of processed cassava will continue to increase cassava prices making it an attractive business venture. Several small-scale cassava farmers are making a fortune and additional income through this business. Preliminary investigations show that the profitable way for a farmer to market his cassava is to add value to it. Unfortunately, cassava undergoes post-harvest physiological deterioration (PPD) after three days of harvest. In order to make cassava farming even more profitable, there is a need to process it within the shelf life of 2 - 3 days after harvesting. One way to preserve cassava is by grating it into pulp and drying it into pellets or chips. In this study, an electrically powered multi-purpose cassava grating machine with grater blades inclined at two different tooth angles, 25˚ and 30˚ was designed, fabricated and its performance characteristics investigated. The results showed that the plate with a tooth angle of 30˚ resulted in higher grating efficiency. This was attributed to better grip on the cassava when perforations on the plate inclined at 30˚. The grating capacity was also significantly improved as very small amounts of cassava slipped out un-grated.展开更多
To enhance the quality factor and sensitivity of refractive index sensors,a feedback waveguide slot grating micro-ring resonator was proposed.An air-hole grating structure was introduced based on the slot micro-ring,u...To enhance the quality factor and sensitivity of refractive index sensors,a feedback waveguide slot grating micro-ring resonator was proposed.An air-hole grating structure was introduced based on the slot micro-ring,utilizing the reflection of the grating to achieve the electromagnetic-like induced transparency effect at different wavelengths.The high slope characteristics of the EIT-like effect enabled a higher quality factor and sensitivity.The transmission principle of the structure was analyzed using the transmission matrix method,and the transmission spectrum and mode field distribution were simulated using the finite-difference time-domain(FDTD)method,and the device structure parameters were adjusted for optimization.Simulation results show that the proposed structure achieves an EIT-like effect with a quality factor of 59267.5.In the analysis of refractive index sensing characteristics,the structure exhibits a sensitivity of 408.57 nm/RIU and a detection limit of 6.23×10^(-5) RIU.Therefore,the proposed structure achieved both a high quality factor and refractive index sensitivity,demonstrating excellent sensing performance for applications in environmental monitoring,biomedical fields,and other areas with broad market potential.展开更多
The phenomenon of photothermally induced transparency(PTIT)arises from the nonlinear behavior of an optical cavity,resulting from the heating of mirrors.By introducing a coupling field in the form of a standing wave,P...The phenomenon of photothermally induced transparency(PTIT)arises from the nonlinear behavior of an optical cavity,resulting from the heating of mirrors.By introducing a coupling field in the form of a standing wave,PTIT can be transitioned into photothermally induced grating(PTIG).A two-dimensional(2D)diffraction pattern is achieved through the adjustment of key parameters such as coupling strength and effective detuning.Notably,we observe first,second,and third-order intensity distributions,with the ability to transfer probe energy predominantly to the third order by fine-tuning the coupling strength.The intensity distribution is characterized by(±m,±n),where m,n=1,2,3.This proposed 2D grating system offers a novel platform for manipulating PTIG,presenting unique possibilities for enhanced functionality and control.展开更多
文摘The article provides substantiation of the choice of the quenching parametersfor the working zone of gin and linter grates and the quenchingparameters.The results of bench and industrial tests of the grate with ahardened working zone are also given.
文摘A new type of 785 nm semiconductor laser device has been proposed.The thin cladding and mode expansion layer structure incorporated into the epitaxy on the p-side significantly impacts the regulation of grating etching depth.Thinning of the p-side waveguide layer makes the light field bias to the n-side cladding layer.By coordinating the confinement effect of the cladding layer,the light confinement factor on the p-side is regulated.On the other hand,the introduction of a mode expansion layer facilitates the expansion of the mode profile on the p side cladding layer.Both these factors contribute positively to reducing the grating etching depth.Compared to the reported epitaxial structures of symmetric waveguides,the new structure significantly reduces the etching depth of the grating while ensuring adequate reflection intensity and maintaining resonance.Moreover,to improve the output performance of the device,the new epitaxial structure has been optimized.Based on the traditional epitaxial structure,an energy release layer and an electron blocking layer are added to improve the electronic recombination efficiency.This improved structure has an output performance comparable to that of a symmetric waveguide,despite being able to have a smaller gain area.
文摘Aiming at the requirement for high-precision tilt monitoring in the field of structural health monitoring(SHM),this paper proposes a sensitivity-enhanced tilt sensor based on a femtosecond fiber Bragg grating(FBG).Firstly,structural design of the tilt sensor was conducted based on static mechanics principles.By positioning the FBG away from the beam’s neutral axis,linear strain enhancement in the FBG was achieved,thereby improving sensor sensitivity.The relationship between FBG strain,applied force,and the offset distance from the neutral axis was established,determining the optimal distance corresponding to maximum strain.Based on this optimization scheme,a prototype of the tilt sensor was designed,fabricated,and experimentally tested.Experimental results show that the FBG offset distance yielding maximum sensitivity is 4.4 mm.Within a tilt angle range of−30°to 30°,the sensor achieved a sensitivity of 129.95 pm/°and a linearity of 0.9997.Compared to conventional FBG-based tilt sensors,both sensitivity and linearity were significantly improved.Furthermore,the sensor demonstrated excellent repeatability(error<0.94%),creep resistance(error<0.30%),and temperature stability(error<0.90%).These results demonstrate the sensor’s excellent potential for SHM applications.The sensor has been successfully deployed in an underground pipeline project,conducting long-term monitoring of tilt and deformation in the steel support structures,further proving its value for engineering safety monitoring.
文摘Long-period fiber gratings have the advantages of small size,corrosion resistance,anti-electro-magnetic interference,and high sensitivity,making them widely used in biomedicine,the power industry,and aerospace.This paper develops a long-period fiber grating sensor based on periodic microchannels.First,a series of linear structures were etched in the cladding of a single-mode fiber by femtosecond laser microma-chining.Then,the laser-modified region was selectively eroded by selective chemical etching to obtain the periodic microchannel structure.Finally,the channels were filled with polydimethylsiloxane(PDMS)to im-prove the spectral quality.The experimental results show that the sensor has good sensitivity in the measure-ment of various parameters such as temperature,stress,refractive index(RI),and bending.It has a temperat-ure sensitivity of−55.19 pm/℃,a strain sensitivity of−3.19 pm/με,a maximum refractive index sensitivity of 540.28 nm/RIU,and a bending sensitivity of 2.65 dB/m^(-1).All of the measurement parameters show good lin-ear responses.The sensor has strong application prospects in the field of precision measurement and sensing.
基金Supported by the National Key Research and Development Program of China(2021YFB2800201)the Strategic Priority Research Program of Chinese Academy of Sciences(XDB43000000)。
文摘A 16-channel arrayed waveguide grating(AWG)with an 800 GHz channel spacing in the O-band has been developed and fabricated based on silica planar lightwave circuit(PLC)technology.By extending the wave⁃length allocation from 8 channels to 16 channels as specified in IEEE 802.3bs,we increased the number of chan⁃nels and boosted transmission capacity to meet the 1.6 Tbps and higher-speed signal transmission requirements for future data centers.Through optimizing the AWG structure,it has achieved insertion loss(IL)better than-1.61 dB,loss uniformity below 0.35 dB,polarization-dependent loss(PDL)below 0.35 dB,adjacent channel cross⁃talk under-20.05 dB,ripple less than 0.75 dB,center wavelength offset under 0.22 nm and 1 dB bandwidth ex⁃ceeding 2.88 nm.The AWG has been successfully measured to transmit 53 Gbaud 4-level pulse amplitude modu⁃lation(PAM4)signal per channel and the total transmission speed can reach over 1.6 Tbps.
文摘The cleaning of gases with low concentrations of small ferromagnetic or paramagnetic particles is a difficult task for conventional filtration. A new alternative procedure, magnetic filtration, is used in this work. Iron oxide aerosol was generated by elutriation of iron oxide particles from a fluidized bed consisting of a mixture of Geldart-C iron oxide powder and large spherical Geldart-B sand particles. The aerosol was filtered by means of a magnetic filter which consisted of one, two or three iron grates staggered to each other. The experimental installation contained also an isokinetic sampling system and a Microtrac SRA 150 Particle Analyser. A theoretical expression for filtration efficiency was deduced from a previous model taking into account the different forces acting on the iron oxide particles. Experimental filtration efficiency matches quite well calculated theoretical efficiency. It was found that an increase in particle size, in thee number of grates or in the applied magnetic field produced higher filtration efficiencies up to 100% in some cases. In all filtration experiments pressure drop through the magnetic filter was very small.
基金upported by the Guangdong Provincial Pearl River Talents Program(Grant No.2019ZT08Z779)the National Natural Science Foundation of China(Grant Nos.U21A20509 and 62205124).
文摘Metal micro-nano grating has received much attention due to its ability to provide high-efficiency light absorption.However,the current research scales of these metal gratings are focused on subwavelengths,and little attention has been paid to the absorption properties of metal gratings at other scales.We investigate the absorption properties of metal gratings based on surface plasmon resonance(SPR)across the scales from superwavelength to subwavelength.Under grazing incidence,we observe continuous strong absorption phenomena from superwavelength to subwavelength Al triangle-groove gratings(TGGs).Perfect absorption is realized at the subwavelength scale,whereas the maximum absorption at all other scales exceeds 74%.The electric field distribution gives the mechanism of the strong absorption phenomenon attributed to SPR on the surface of Al TGGs at different scales.In particular,subwavelength Al TGGs have perfectly symmetric absorption properties for different blaze angles,and the symmetry is gradually broken as the grating period’s scale increases.Furthermore,taking Al gratings with varying groove shapes for example,we extend the equivalence rule of grating grooves to subwavelength from near-wavelength and explain the symmetric absorption properties in Al TGGs.We unify the research of metal grating absorbers outside the subwavelength scale to a certain extent,and these findings also open new perspectives for the design of metal gratings in the future.
基金financial supports from the National Natural Science Foundation of China(52105434)China Postdoctoral Science Foundation(2022M710642).
文摘With the advantage of high light intensity due to low scatting, structural colors generated by metallic diffraction nanograting structures, used as a type of diffractive optical element, have shown great potential for application in industrial and scientific research fields such as optical anti-counterfeiting and sensors. Within the visible light wavelength range, the diffraction performance is highly dependent on the height and shape consistencies of the nanograting. However, there is still room for the improvement in the flexible control over structure formation through mechanical nanomachining within this scale. The novelty of this paper lies in proposing a machining strategy for nanograting structures with variable heights through precise regulation of the revolving trajectory using tip-based nano down-milling. It explores how different geometric features of trajectories impact the amount of material deformed into a grating and its distribution shape, referred to as undeformed grating area. By analyzing the forming mechanisms of nanogratings under various trajectories with finite element simulation, the desired undeformed grating area is successfully achieved, which is mainly extruded by the tip flank face to form the right facet of the grating, resulting in a small deformation degree and a high deformation efficiency. Three distinct types of revolving trajectories are filtered out according to five quantitative evaluation indicators for machining performance, namely material plastic deformation, grating profile consistency, grating height consistency, machining forces, and area transforming height, and then are compared in processing nanogratings with different heights. It is obtained that only by regulating the vertical vibration amplitude of the revolving trajectory, the semicircle trajectory with the optimal geometric features has the ability to machine high-quality nanograting structures with a continuous height variation of up to 220 nm in a spacing of 400 nm.
基金supported by the National Natural Science Foundation of China(No.52276094)the Education Project of Hunan Provincial Department(Nos.20B602 and 22C0112)+2 种基金the Industry University Education Cooperation Project(No.230803117185211)the Research Project on Teaching Reform in Ordinary Undergraduate Universities in Hunan Province(No.202401000142)the Natural Science Foundation of Hunan Province(No.2020JJ4935)。
文摘There is limited amount of research on surface plasmon resonance(SPR)sensors with self-referencing capabilities which are based on dielectric gratings.In the short-wavelength range,a metal grating sensor is capable of simultaneously measuring liquid refractive index under proposed temperature.A fabricated gold grating is placed on one side of a thin gold film for refractive index measurement,while the other with polydimethylsiloxane(PDMS)is deposited on the other side for temperature measurement.We use finite element analysis to research its sensing characteristics.Due to the high refractive index sensitivity of SPR sensors and thermo-optic coefficient of PDMS,we discovered the maximum spectral sensitivity of the sensor is 564 nm/RIU and-50 pm/℃when the liquid refractive index ranges from 1.30 to 1.40 with temperature ranging from 0℃ to 100℃.Numerical results indicate that there may not be mutual interference between two channels for measuring refractive index and temperature,which reduces the complexity of sensor measurements.
基金supported by the National Natural Science Foundation of China(No.61505160)the Innovation Capability Support Program of Shaanxi(No.2018KJXX-042)+2 种基金the Natural Science Basic Research Program of Shaanxi(No.2019JM-084)the State Key Laboratory of Transient Optics and Photonics(No.SKLST202108)the Graduate Innovation and Practical Ability Training Project of Xi’an Shiyou University(No.YCS22213190)。
文摘We proposed and demonstrated the ultra-compact 1310/1550 nm wavelength multiplexer/demultiplexer assisted by subwavelength grating(SWG)using particle swarm optimization(PSO)algorithm in silicon-on-insulator(SOI)platform.Through the self-imaging effect of multimode interference(MMI)coupler,the demultiplexing function for 1310 nm and 1550 nm wavelengths is implemented.After that,three parallel SWG-based slots are inserted into the MMI section so that the effective refractive index of the modes can be engineered and thus the beat length can be adjusted.Importantly,these three SWG slots significantly reduce the length of the device,which is much shorter than the length of traditional MMI-based wavelength demultiplexers.Ultimately,by using the PSO algorithm,the equivalent refractive index and width of the SWG in a certain range are optimized to achieve the best performance of the wavelength demultiplexer.It has been verified that the device footprint is only 2×30.68μm^(2),and 1 dB bandwidths of larger than 120 nm are acquired at 1310 nm and 1550 nm wavelengths.Meanwhile,the transmitted spectrum shows that the insertion loss(IL)values are below 0.47 dB at both wavelengths when the extinction ratio(ER)values are above 12.65 dB.This inverse design approach has been proved to be efficient in increasing bandwidth and reducing device length.
基金supported by the National Key Research and Development Program of China(No.2023YFC3707002).
文摘The compressive strength of the pellets is a key indicator that determines the production efficiency in straight grate.It usually relies on manual sampling and testing,which is cumbersome and inefficient.To address this,a time series prediction model for pellet compressive strength was developed,combining a gradient boosting decision tree with a temporal convolutional network(GBDT-TCN).Firstly,the key physical characteristics of the pellet production process were established through the feature construction method,and then the multicollinear features were eliminated based on the Spearman correlation coefficient.The final selection of feature parameters,amounting to 9,was determined using recursive feature elimination(RFE)method.Finally,the GBDT algorithm was used to establish the nonlinear relationship between these features and the compressive strength.The GBDT prediction results and process data were constructed into a time series dataset,which was input into the TCN unit cascade model.The time series information was captured through the distribution coefficient of the loss function in the time series.Results illustrate that the GBDT-TCN method proposed performs well in the task of predicting the compressive strength of pellets.Compared with the prediction model using only GBDT,the accuracy within±100 N is increased from 83.33%to 90.00%.
基金supported in part by the National Natural Science Foundation of China(Nos.61735014 and 61927812)the Shaanxi Provincial Education Department(No.18JS093)+2 种基金the Natural Science Basic Research Program of Shaanxi Province(No.2024JC-YBMS-530)the Operation Fund of Logging Key Laboratory of Group Company(No.2021DQ0107-11)the Graduate Student Innovation Fund of Xi’an Shiyou University(No.YCS23213193)。
文摘A compact and highly sensitive gas pressure and temperature sensor based on Fabry-Pérot interferometer(FPI)and fiber Bragg grating(FBG)is proposed and demonstrated experimentally in this paper.The theoretical model for pressure and temperature sensing is established.Building on this foundation,a novel micro silicon cavity sensor structure sensitive to pressure is devised downstream of an FBG.The concept of separate measurement and the mechanisms enhancing pressure sensitivity are meticulously analyzed,and the corresponding samples are fabricated.The experimental results indicate that the pressure sensitivity of the sensor is-747.849 nm/MPa in 0—100 k Pa and its linearity is 99.7%and it maintains good stability in 150 min.The sensor offers the advantages of compact size,robust construction,easy fabrication,and high sensitivity,making it potentially valuable for micro-pressure application.
基金support by the Advanced Integrated Optoelectronics Facility at Tianjin University
文摘Metasurfaces composed of two-dimensional nanopillar arrays can manipulate light fields in desirable ways and exhibit the unique advantage of beam steering.Here,we experimentally demonstrate a metasurface-based wide-angle broadband all-dielectric blazed grating with an extreme incident angle of up to 80°,which is achieved by optimizing the wide-angle phase shifts and transmissivities of the unit cells.It exhibits a maximum diffraction efficiency of 72%and a high average efficiency of 64%over a wide range of incident angles from−80° to 45° at 1.55μm.Moreover,the proposed grating has a broad bandwidth of 200 nm(1.45-1.65μm),and average efficiencies of more than 50%can be achieved experimentally over the same incidence angles.Our results may pave the way for the creation of novel and efficient flat optical devices for wavefront control.
基金the Biomedical Science and Technology Support Special Project of Shanghai Science and Technology Committee(No.20S31908300)。
文摘In response to the shortcomings of the common encoders in the industry,of which the photoelectric encoders have a poor anti-interference ability in harsh industrial environments with water,oil,dust,or strong vibrations and the magnetic encoders are too sensitive to magnetic field density,this paper designs a new differential encoder based on the grating eddy-current measurement principle,abbreviated as differential grating eddy-current encoder(DGECE).The grating eddy-current of DGECE consists of a circular array of trapezoidal reflection conductors and 16 trapezoidal coils with a special structure to form a differential relationship,which are respectively located on the code plate and the readout plate designed by a printed circuit board.The differential structure of DGECE corrects the common mode interference and the amplitude distortion due to the assembly to some extent,possesses a certain anti-interference capability,and greatly simplifies the regularization algorithm of the original data.By means of the corresponding readout circuit and demodulation algorithm,the DGECE can convert the periodic impedance variation of 16 coils into an angular output within the 360°cycle.Due to its simple manufacturing process and certain interference immunity,DGECE is easy to be integrated and mass-produced as well as applicable in the industrial spindles,especially in robot joints.This paper presents the measurement principle,implementation methods,and results of the experiment of the DGECE.The experimental results show that the accuracy of the DGECE can reach 0.237%and the measurement standard deviation can reach±0.14°within360°cycle.
文摘Purpose–To address the encapsulation challenge of fiber Bragg grating(FBG)sensors in complex railway environments,this paper designs a clip-on composite sensor enabling installation-friendly deployment and long-term axle counting system monitoring.Design/methodology/approach–Wheel–rail mechanical behavior was simulated via finite element analysis(FEA)to determine optimal sensor placement.A clip-on composite sensor was subsequently engineered.Stress transduction efficacy was validated through FEA quantification of stress responses at the axle counter location.Findings–The proposed FBG axle counter integrates temperature compensation and anti-detachment monitoring as well as advantages such as simplified installation with minimal maintenance and sustained operational reliability.It effectively transmits stress,yielding a measured strain of 39μe under static loading conditions without sensitivity-enhancing elements.Originality/value–This study performs FEA of wheel-rail stress distribution and engineers the dual-slot composite sensor,FEAwas conducted to quantify the stress magnitude at the axle sensor position of the dual-slot composite sensor.Additionally,FEA was performed on sensors with different structural configurations,including adjustments to the axle sensor position,number of slots and axle position.The results confirmed that the designed composite sensor exhibits superior stress transfer characteristics.
基金supported by the UK’s Engineering and Physical Sciences Research Council(Grant Nos.EP/V000624/1,EP/X03495X/1,EP/X041166/1,and EP/T02643X/1)the Royal Society(Grant No.RG\R2\232531).
文摘Research on supercontinuum sources on silicon has made significant progress in the past few decades.However,conventional approaches to broaden the spectral bandwidth often rely on complex and critical dispersion engineering by optimizing the core thickness or introducing the cladding with special materials and structures.We propose and demonstrate supercontinuum generation using long-periodgrating(LPG)waveguides on silicon with a C-band pump.The LPG waveguide is introduced for quasi-phase matching,and the generated supercontinuum spectrum is improved greatly with grating-induced dispersive waves.In addition,the demonstrated LPG waveguide shows a low propagation loss comparable with regular silicon photonic waveguides without gratings.In experiments,when using a 1550-nm 75-fs pulse pump with a pulse energy of 200 pJ,the supercontinuum spectrum generated with the present LPG waveguide shows an ultrabroad extent from 1150 to 2300 nm,which is much wider by 200 nm than that achieved by dispersionengineered uniform silicon photonic waveguides on the same chip.This provides a promising option for on-chip broadband light source for silicon photonic systems.
文摘Food security has been an issue of global concern and this has attracted a lot of research interest. Cassava is an extremely popular crop and is becoming the cornerstone for addressing food security in many parts of the world. The competing needs for cassava cuts across both human and animal consumption. It serves as a raw material in textile industry and is now one of the preferred materials for making biofuels. As the world’s population continues to grow, the demand for drought resistant crops such as cassava is increasing. The high demand for various forms of processed cassava will continue to increase cassava prices making it an attractive business venture. Several small-scale cassava farmers are making a fortune and additional income through this business. Preliminary investigations show that the profitable way for a farmer to market his cassava is to add value to it. Unfortunately, cassava undergoes post-harvest physiological deterioration (PPD) after three days of harvest. In order to make cassava farming even more profitable, there is a need to process it within the shelf life of 2 - 3 days after harvesting. One way to preserve cassava is by grating it into pulp and drying it into pellets or chips. In this study, an electrically powered multi-purpose cassava grating machine with grater blades inclined at two different tooth angles, 25˚ and 30˚ was designed, fabricated and its performance characteristics investigated. The results showed that the plate with a tooth angle of 30˚ resulted in higher grating efficiency. This was attributed to better grip on the cassava when perforations on the plate inclined at 30˚. The grating capacity was also significantly improved as very small amounts of cassava slipped out un-grated.
基金supported by Natural Science Foundation of Gansu Province(NO.21JR7RA289)。
文摘To enhance the quality factor and sensitivity of refractive index sensors,a feedback waveguide slot grating micro-ring resonator was proposed.An air-hole grating structure was introduced based on the slot micro-ring,utilizing the reflection of the grating to achieve the electromagnetic-like induced transparency effect at different wavelengths.The high slope characteristics of the EIT-like effect enabled a higher quality factor and sensitivity.The transmission principle of the structure was analyzed using the transmission matrix method,and the transmission spectrum and mode field distribution were simulated using the finite-difference time-domain(FDTD)method,and the device structure parameters were adjusted for optimization.Simulation results show that the proposed structure achieves an EIT-like effect with a quality factor of 59267.5.In the analysis of refractive index sensing characteristics,the structure exhibits a sensitivity of 408.57 nm/RIU and a detection limit of 6.23×10^(-5) RIU.Therefore,the proposed structure achieved both a high quality factor and refractive index sensitivity,demonstrating excellent sensing performance for applications in environmental monitoring,biomedical fields,and other areas with broad market potential.
文摘The phenomenon of photothermally induced transparency(PTIT)arises from the nonlinear behavior of an optical cavity,resulting from the heating of mirrors.By introducing a coupling field in the form of a standing wave,PTIT can be transitioned into photothermally induced grating(PTIG).A two-dimensional(2D)diffraction pattern is achieved through the adjustment of key parameters such as coupling strength and effective detuning.Notably,we observe first,second,and third-order intensity distributions,with the ability to transfer probe energy predominantly to the third order by fine-tuning the coupling strength.The intensity distribution is characterized by(±m,±n),where m,n=1,2,3.This proposed 2D grating system offers a novel platform for manipulating PTIG,presenting unique possibilities for enhanced functionality and control.
