Modification of reduced graphene oxide in a controllable manner provides a promising material platform for producinggraphene based devices. Its fusion with direct laser writing methods has enabled cost-effective and s...Modification of reduced graphene oxide in a controllable manner provides a promising material platform for producinggraphene based devices. Its fusion with direct laser writing methods has enabled cost-effective and scalable production for advanced applications based on tailored optical and electronic properties in the conductivity, the fluorescence and the refractive index during the reduction process. This mini-review summarizes the state-of-the-art status of the mechanisms of reduction of graphene oxides by direct laser writing techniques as well as appealing optical diffractive applications including planar lenses, information storage and holographic displays. Owing to its versatility and up-scalability, the laser reduction method holds enormous potentials for graphene based diffractive photonic devices with diverse functionalities.展开更多
Via the first principles calculations, we predict that Cu doped graphene oxide （GO） is a much better nanocatalyst in terms of activity and feasibility. The high activity of Cu doped graphene oxides may be attributed...Via the first principles calculations, we predict that Cu doped graphene oxide （GO） is a much better nanocatalyst in terms of activity and feasibility. The high activity of Cu doped graphene oxides may be attributed to the charge transfer between the GO and Cu atom, resulting in an activated Cu atom. In the ER mechanism, the CO molecules directly react with the activated O2, then forming a metastable carbonate-like intermediate state （OOCO）. The reaction may proceed via two reaction paths of OOCO → CO2 ＋ O and CO ＋ OOCO → 2CO2, respectively. The calculated results show that the latter path is relatively more thermodynamically favorable with a modest energy barrier, so it should be more preferred. We expect our theoretical predictions to open a new avenue to fabricate carbon-based catalysts for CO oxidation with lower cost and higher activity.展开更多
The sheet size of a graphene oxide （GO） can greatly influence its electrical, optical, mechanical, electrochemical and catalytic property. It is a key challenge to how to control the sheet size during its preparatio...The sheet size of a graphene oxide （GO） can greatly influence its electrical, optical, mechanical, electrochemical and catalytic property. It is a key challenge to how to control the sheet size during its preparation in different application fields. According to our previous theoretical calculations of the effect of temperature on the oxidation process of graphene, we use Hummers method to prepare GOs with different sheet sizes by simply controlling the temperature condition in the process of the oxidation reaction of potassium permanganate （KMnO4） with graphene and the dilution process with deionized water. The results detected by transmission electron microscopy （TEM） and atomic force microscopy （AFM） show that the average sizes of GO sheets prepared at different temperatures are about 1 μm and 7 μm respectively. The ultraviolet-visible spectroscopy （UV-vis） shows that lower temperature can lead to smaller oxidation degrees of GO and less oxygen functional groups on the surface. In addition, we prepare GO membranes to test their mechanical strengths by ultrasonic waves, and we find that the strengths of the GO membranes prepared under low temperatures are considerably higher than those prepared under high temperatures, showing the high mechanical strengths of larger GO sheets. Our experimental results testify our previous theoretical calculations. Compared with the traditional centrifugal separation and chemical cutting method, the preparation process of GO by temperature control is simple and low-cost and also enables large-size synthesis. These findings develop a new method to control GO sheet sizes for large-scale potential applications.展开更多
Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic struct...Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic structure light pressure electric generator(Basic-LPEG),which utilized a layered configuration of Ag/Pb(Zr,Ti)O_(3)(PZT)/Pt/GaAs to generate electricity based on light-induced pressure on the PZT.In this study,we sought to enhance the performance of this Basic-LPEG by introducing Ag nanoparticles/graphene oxide(AgNPs/GO)composite units(NP-LPEG),creating upgraded harvesting device.Specifically,by depositing the AgNPs/GO units twice onto the Basic-LPEG,we observed an increase in output voltage and current from 241 mV and 3.1μA to 310 mV and 9.3μA,respectively,under a solar simulator.The increase in electrical output directly correlated with the intensity of the light pressure impacting the PZT,as well as matched the Raman measurements,finite-difference time-domain simulations,and COMSOL Multiphysics Simulation.Experimental data revealed that the enhancement in electrical output was proportional to the number of hot spots generated between Ag nanoparticles,where the electric field experienced substantial amplification.These results underline the effectiveness of AgNPs/GO units in boosting the light-induced electric generation capacity,thereby providing a promising pathway for high-efficiency energy harvesting devices.展开更多
With the fast development of nanoscience and nanotechnology,the nanomaterials have attracted multidisciplinary interests.The high specific surface area and large numbers of oxygen-containing functional groups of graph...With the fast development of nanoscience and nanotechnology,the nanomaterials have attracted multidisciplinary interests.The high specific surface area and large numbers of oxygen-containing functional groups of graphene oxides(GOs) make them suitable in the preconcentration and solidification of radionuclides from wastewater.In this paper,mainly based on the recent work carried out in our laboratory,the efficient elimination of radionuclides using GOs and GO-based nanomaterials as adsorbents are summarized and the interaction mechanisms are discussed from the results of batch techniques,surface complexation modeling,spectroscopic analysis and theoretical calculations.This review is helpful for the understanding of the interactions of radionuclides with GOs and GO-based nanomaterials,which is also crucial for the application of GOs and GO-based nanomaterials in environmental radionuclide pollution management and also helpful in nuclear waste management.展开更多
The graphene oxides （GOs） have attracted multidisciplinary study because of their special physicochemical properties. The high surface area and large amounts of oxygen-containing functional groups make GOs suitable ...The graphene oxides （GOs） have attracted multidisciplinary study because of their special physicochemical properties. The high surface area and large amounts of oxygen-containing functional groups make GOs suitable materials for the efficient elimination of heavy metal ions from aqueous solutions. Herein the sorption of Ni（Ⅱ） on GOs was studied using batch experi- ments, and the results showed that the sorption of Ni（Ⅱ） is strongly dependent on pH and ionic strength at pH〈8, and inde- pendent of ionic strength at pH〉8. The sorption of Ni（Ⅱ） is mainly dominated by outer-sphere surface complexation and ion exchange at low pH, and by inner-sphere surface complexation at high pH. The interaction of Ni（Ⅱ） with GOs was also inves- tigated by theoretical density functional theory （DFT） calculations, and the results show that the sorption of Ni（Ⅱ） on GOs is mainly attributed to the -COH and -COC groups and the DFT calculations show that Ni（Ⅱ） forms stable GO_Ni_triplet struc- ture with the binding energy of -39.44 kcal/mol, which is in good agreement with the batch sorption experimental results. The results are important for the application of GOs as adsorbents in the efficient removal of Ni（Ⅱ） from wastewater in environ- mental pollution cleanup.展开更多
Graphene oxides(GOs) were synthesized via modified Hummers method, and were applied as adsorbents to remove radionuclides from large volumes of aqueous solutions. The single and competitive sorption of four radionucli...Graphene oxides(GOs) were synthesized via modified Hummers method, and were applied as adsorbents to remove radionuclides from large volumes of aqueous solutions. The single and competitive sorption of four radionuclides(i.e., U(VI), 152+154Eu(III), 85+89Sr(II) and 134Cs(I)) on the GOs from aqueous solutions were investigated as a function of p H, ionic strength and radionuclide initial concentrations using batch technique. The results showed that the GOs had much higher sorption capacity than many other contemporary materials, for the preconcentration of radionuclides from large volumes of aqueous solutions. The sorption of radionuclides on GOs obeyed the Langmuir model, and was mainly attributed to surface complexation via the coordination of radionuclides with the oxygen-containing functional groups on GO surfaces. The competitive sorption results indicated that the selectivity sorption capacities were U(VI)>Eu(III)>Sr(II)>Cs(I). The GOs are suitable materials for the efficient removal and preconcentration of radionuclides from aqueous solutions in nuclear waste management and environmental pollution cleanup.展开更多
With the increasing popularity of wearable electronic devices,there is an urgent demand to develop electronic textiles(e-textiles)for device fabrication.Nevertheless,the difficulty in reconciliation between conductivi...With the increasing popularity of wearable electronic devices,there is an urgent demand to develop electronic textiles(e-textiles)for device fabrication.Nevertheless,the difficulty in reconciliation between conductivity and manufacturing costs hinders their large-scale practical applications.Herein,we reported a facile and economic method for preparing conductive e-textiles.Specifically,nonconductive polypropylene(PP)was wrapped by reduced graphene oxide(rGO),followed by the electrodeposition of Ni nanoparticles(NPs).Notably,modulating the sheet size of graphene oxide(GO)resulted in controllable deposition of Ni NPs with adjustable size,allowing for controlled manipulations over the structures,morphologies,and conductivity of the obtained e-textiles,which influenced their performance in electrochemical glucose detection subsequently.The optimal material,denoted as Ni/rGO+(0.2)/PP,exhibited an impressive conductivity of 7.94×10^(4)S·m^(−1).With regard to the excellent conductivity of the as-prepared e-textiles and the high electrocatalytic activity of Ni for glucose oxidation,the asprepared e-textiles were subjected to glucose detection.It was worth emphasizing that the Ni/rGO_(0.2)/PP-based electrode demonstrated promising performance for nonenzymatic/label-free glucose detection,with a detection limit of 0.36μM and a linear response range of 0.5μM to 1 mM.This study paves the way for further development and application prospects of conductive etextiles.展开更多
Ozone was used to oxidize graphene oxides （GO） to generate ozonated graphene oxides （OGO） with higher oxygen-containing functional groups. The as-prepared OGO was characterized by Fourier transformed infrared spec...Ozone was used to oxidize graphene oxides （GO） to generate ozonated graphene oxides （OGO） with higher oxygen-containing functional groups. The as-prepared OGO was characterized by Fourier transformed infrared spectroscopy （FTIR）, scanning electron microscopy （SEM） and X-ray photoelectron spectroscopy （XPS）. Based on the results of potentiometric acid-base ti- trations, the total carboxylic acid concentration on OGO surface was calculated to be 3.92 retool/g, which was much higher than that on GO surface. The results of adsorption experiments indicated that the adsorption capacities of OGO for Sr（II） and U（VI） removal were improved significantly after ozonization.展开更多
In this contribution, a novel high-temperature CO_2 adsorbent consisting of Mg-Al layered double hydroxide （LDH） and graphene oxide （GO） nanosheets was prepared and evaluated. The nanocomposite-type adsorbent was ...In this contribution, a novel high-temperature CO_2 adsorbent consisting of Mg-Al layered double hydroxide （LDH） and graphene oxide （GO） nanosheets was prepared and evaluated. The nanocomposite-type adsorbent was synthesized based on the electrostatically driven self-assembly between positively charged Mg-Al LDH single sheet and negatively charged GO monolayer. The characteristics of this novel adsorbent were investigated using XRD, FE-SEM, HRTEM, FT-IR, BET and TGA. The results showed that both the CO_2 adsorption capacity and the multi- cycle stability of LDH were increased with the addition of GO owing to the enhanced particle dispersion and stabilization. In particular, the absolute CO_2 capture capacity of LDH was increased by more than twice by adding 6.54 wt% GO as support. GO appeared to be especially effective for supporting LDH sheets. Moreover, the CO_2 capture capacity of the adsorbent could be further increased by doping with 15 wt% K_2CO_3. This work demonstrated a new approach for the preparation of LDH-based hybrid-type adsorbents for CO2 capture.展开更多
One of today＇s major challenges is to provide green materials for a cleaner environment. We have conducted studies on carbon dioxide（CO2） adsorption and conversion to valuable products by an ecofriendly approach ba...One of today＇s major challenges is to provide green materials for a cleaner environment. We have conducted studies on carbon dioxide（CO2） adsorption and conversion to valuable products by an ecofriendly approach based in chitosan/graphene oxide（CSGO） nanocomposite film. Rheological behavior indicates that the CSGO has a better solvation property than the pure chitosan. An adsorption capacity of 1.0152 mmol CO2/g of CSGO nanocomposite at4.6 bar was observed. The catalytic behavior of the CSGO nanocomposite in the presence of tetra-n-butylammonium iodide（n-Bu4 NI） as co-catalyst was evaluated for the cycloaddition of CO2 to epoxides, to give cyclic carbonates, in the absence of any solvent. These results strongly suggest that the CSGO nanocomposite may open new vistas towards the development of ecofriendly material for catalytic conversion and adsorption of CO2 on industrial scale.展开更多
Developing high-performance nanostructured materials is key to deliver the potential of hydrovoltaic technology into practical applications.As single-component materials have approached its limit in generating hydrovo...Developing high-performance nanostructured materials is key to deliver the potential of hydrovoltaic technology into practical applications.As single-component materials have approached its limit in generating hydrovoltaic electricity,the development of multi-component hydrovoltaic materials has been necessary in continuously boosting the electricity output.Here,we report a hydrovoltaic material by integrating reduced graphene oxides and polypyrrole nanoparticles(rGO/PPy),where the rGO contributes improved conductivity and large specific surface area while PPy nanoparticles enable enhanced interaction with water.The device fabricated with this material generates a short-circuit current of 6μA as well as a maximum power density of over 1μW/cm3 from natural evaporation of water.And the substantial ion-PPy interaction enables robust voltage generation from evaporation of various salt solutions.Moreover,an outstanding scaling ability is demonstrated by connecting 10 devices in series that generate a sustainable voltage of up to~2.5 V,sufficing to power many commercial devices,e.g.LED bulb and LCD screen.展开更多
Carboxylated pillar[5]arene(CP5)macrocycles were modified onto the surface of reduced graphene oxide(RGO)via covalent bonds to form new pillarene-functionalized RGO nanosheets,i.e.,RGO-CP5.The obtained RGO-CP5 nanoshe...Carboxylated pillar[5]arene(CP5)macrocycles were modified onto the surface of reduced graphene oxide(RGO)via covalent bonds to form new pillarene-functionalized RGO nanosheets,i.e.,RGO-CP5.The obtained RGO-CP5 nanosheets capable of molecular recognition exhibited much better water-dispersibility and enhanced fluorescence-quenching property as compared with native RGO.This new sensing platform holds great potentials in the sensing and detection of analytes,such as organic dye molecules and pesticides,in aqueous solutions.展开更多
Silicon-air batteries(SABs),a new type of semiconductor air battery,have a high energy density.However,some side reactions in SABs cause Si anodes to be covered by a passivation layer to prevent continuous discharge,a...Silicon-air batteries(SABs),a new type of semiconductor air battery,have a high energy density.However,some side reactions in SABs cause Si anodes to be covered by a passivation layer to prevent continuous discharge,and the anode utilization rate is low.In this work,reduced graphene oxide(RGO)fabricated via high-temperature annealing or L-ascorbic acid(L.AA)reduction was first used to obtain Si nanowires/RGO-1000(Si NWs/RGO-1000)and Si nanowires/RGO-L.AA(Si NWs/RGO-L.AA)composite anodes for SABs.It was found that RGO suppressed the passivation and self-corrosion reactions and that SABs using Si NWs/RGO-L.AA as the anode can discharge for more than 700 h,breaking the previous performance of SABs,and that the specific capacity was increased by 90.8%compared to bare Si.This work provides a new solution for the design of high specific capacity SABs with nanostructures and anode protective layers.展开更多
Fast electron-hole recombination issues during titanium dioxide(TiO_(2))photocatalysis limit its application in preventing bacterial infection during bone defect repair.In this study,TiO_(2)@reduced graphene oxide(rGO...Fast electron-hole recombination issues during titanium dioxide(TiO_(2))photocatalysis limit its application in preventing bacterial infection during bone defect repair.In this study,TiO_(2)@reduced graphene oxide(rGO)composites were synthesized using a hydrothermal method in which rGO,which possesses very high electrical conductivity,promotes the separation of photoelectron-hole pairs of TiO_(2),thus improving the efficiency of photocatalytic production of reactive oxygen species(ROS).Subsequently,TiO_(2)@rGO composites were introduced into poly-L-lactic acid(PLLA)to prepare bone scaffolds with photocatalytic antibacterial function via selective laser sintering.The results showed that TiO_(2)grew on the surface of rGO and formed a covalent bond connection(Ti-O-C)with rGO.A decreased electrochemical impedance of TiO_(2)@rGO composites was observed,and the transient photocurrent intensity increased from 0.05 to 0.5μA/cm^(2).Analysis of electron spin resonance found that the photocatalytic products of TiO_(2)were·OH and·O^(2-),two kinds of ROS capable of killing bacteria via disrupting the structure of the bacterial membrane in vitro.Antibacterial experiments showed that the PLLA/TiO_(2)@rGO scaffolds had good antibacterial properties against Escherichia coli and Staphylococcus aureus.Finally,we report that these scaffolds exhibited both enhanced mechanical properties due to the addition of TiO_(2)@rGO as a reinforcement material and good biocompatibility during cell proliferation.展开更多
Carbon-based foams with a three-dimensional structure can serve as a lightweight template for the rational design and control-lable preparation of metal oxide/carbon-based composite microwave absorption materials.In t...Carbon-based foams with a three-dimensional structure can serve as a lightweight template for the rational design and control-lable preparation of metal oxide/carbon-based composite microwave absorption materials.In this study,a flake-like nickel cobaltate/re-duced graphene oxide/melamine-derived carbon foam(FNC/RGO/MDCF)was successfully fabricated through a combination of solvo-thermal treatment and high-temperature pyrolysis.Results indicated that RGO was evenly distributed in the MDCF skeleton,providing ef-fective support for the load growth of FNC on its surface.Sample S3,the FNC/RGO/MDCF composite prepared by solvothermal method for 16 h,exhibited a minimum reflection loss(RL_(min))of-66.44 dB at a thickness of 2.29 mm.When the thickness was reduced to 1.50 mm,the optimal effective absorption bandwidth was 3.84 GHz.Analysis of the absorption mechanism of FNC/RGO/MDCF revealed that its excellent absorption performance was primarily attributed to the combined effects of conduction loss,multiple reflection,scattering,in-terface polarization,and dipole polarization.展开更多
In pursuit of more efficient and stable electrochemical energy storage materials,composite materials consisting of metal oxides and graphene oxide have garnered significant attention due to their unique structures and...In pursuit of more efficient and stable electrochemical energy storage materials,composite materials consisting of metal oxides and graphene oxide have garnered significant attention due to their unique structures and exceptional properties.Graphene oxide(GO),a two-dimensional material with an extremely high specific surface area and excellent conductivity,offers new possibilities for enhancing the electrochemical performance of metal oxides.In this work,we synthesized met-al-organic framework(MOF)and GO composites by regulating the amount of GO,and successfully prepared composites of metal oxides supported by nitrogen-doped carbon frameworks and GO through a simple one-step calcination process.Based on the electrochemical tests,the optimal amount of GO was determined.This research will provide new insights into and directions for designing and synthesizing metal oxide and graphene oxide composite materials with an ideal electro-chemical performance.展开更多
The demand for high-energy-density sodium-ion batteries has driven research to increase the hard carbon(HC)plateau capacity(<0.1 V),but the plateau capacity-rate capability trade-off limits performance.We report a ...The demand for high-energy-density sodium-ion batteries has driven research to increase the hard carbon(HC)plateau capacity(<0.1 V),but the plateau capacity-rate capability trade-off limits performance.We report a way to regulate the closed pore structure and improve the rate capability of HC by the addition of graphene oxide using an emulsification process.In a non-emulsion system,graphene oxide not only shortens ion diffusion paths by inducing the formation of flakelike HC but also significantly improves the rate performance by serving as conductive bridges within the carbon matrix.The prepared graphene/phenolic resin carbon composite has reversible capacities of 362,340,319,274,119,86,69 and 48 mAh g^(−1)at current densities of 0.02,0.05,0.1,0.2,0.5,1,2 and 5 A g^(−1),respectively.When emulsification is introduced,the graphene oxide acts as a nano-confinement template,guiding the cross-linking of phenolic resin to form uniformly sized closed pores.This composite electrode material has the highest plateau capacity of 268 mAh g^(−1)at 20 mA g^(−1).展开更多
Graphene oxide nanomaterials are increasingly used in various fields due to their superior properties.In order to study the influence of graphene oxide additives on the performance of modified asphalt,in this study,gr...Graphene oxide nanomaterials are increasingly used in various fields due to their superior properties.In order to study the influence of graphene oxide additives on the performance of modified asphalt,in this study,graphene oxide modified asphalt was prepared and characteristics was studied including the high deformation resistance performance and the self-healing property of modified asphalt.Functional groups and morphology of graphene oxide modified asphalt were described by Fourier transform infrared spectroscopy.The high deformation resistance performance and self-healing effect of asphalt samples were obtained through dynamic slear rheometer(DSR)test.Results shows that graphene oxide dispersions improve the performance of asphalt relatively well compared to graphene oxide powder.There is no chemical reaction between graphene oxide and asphalt,but physical connection.The addition of graphene oxide improved the high deformation resistance of modified asphalt and expedited the self-healing ability of asphalt under fatigue load.展开更多
Graphene oxide (GO) reduced by Stachys lavandulifolia extract (SLE) was produced and characterised. The anti-corrosion behaviour of epoxy coatings containing GO and rGO nanosheets was investigated. FESEM-EDS, FT-IR, a...Graphene oxide (GO) reduced by Stachys lavandulifolia extract (SLE) was produced and characterised. The anti-corrosion behaviour of epoxy coatings containing GO and rGO nanosheets was investigated. FESEM-EDS, FT-IR, and Raman spectroscopy were used to examine the microstructure and chemical composition of the nanosheets and epoxy coatings. EIS experiment was used to explore the corrosion behaviour of the coatings. The O/C ratio for GO and rGO-SLE was found to be 2.5 and 4.5, indicating a decrease in the carbon content after the reduction of GO, confirming the adsorption of SLE onto the GO nanosheets. The successful reduction of GO in the presence of SLE particles was confirmed by disappearing the C=O peak and a significant decrease in the C-O-C bond intensity. The epoxy/rGO- SLE coatings exhibited the highest double-layer thickness and excellent corrosion resistance compared to neat epoxy and epoxy/GO coatings, emphasizing the significant role of rGO in enhancing the protective performance of epoxy coatings. The highest values for total charge transfer and film resistances and the inhibition efficiency were observed to be 6529 Ω·cm^(2) and 90%, respectively, for the epoxy/rGO-SLE coated steel plate. It was also found that the epoxy/0.15 wt.% rGO-SLE coating demonstrates the best corrosion resistance performance.展开更多
基金The authors thank National Natural Science Foundation of China （61522504, 61420106014, 61432007, 11604123） and Guangdong Provincial Innovation and Entrepreneurship Project （2016ZT06D081） for funding supports. M Gu acknowledges the supports from the Australian Research Council （ARC） through the Discovery Project （DP140100849） and Laureate Fellowship Scheme （FL100100099）.
文摘Modification of reduced graphene oxide in a controllable manner provides a promising material platform for producinggraphene based devices. Its fusion with direct laser writing methods has enabled cost-effective and scalable production for advanced applications based on tailored optical and electronic properties in the conductivity, the fluorescence and the refractive index during the reduction process. This mini-review summarizes the state-of-the-art status of the mechanisms of reduction of graphene oxides by direct laser writing techniques as well as appealing optical diffractive applications including planar lenses, information storage and holographic displays. Owing to its versatility and up-scalability, the laser reduction method holds enormous potentials for graphene based diffractive photonic devices with diverse functionalities.
基金supported by the National Natural Science Foundation of China(No.21004009)the Foundation of Jiangxi Educational Committee(No.GJJ14485)
文摘Via the first principles calculations, we predict that Cu doped graphene oxide （GO） is a much better nanocatalyst in terms of activity and feasibility. The high activity of Cu doped graphene oxides may be attributed to the charge transfer between the GO and Cu atom, resulting in an activated Cu atom. In the ER mechanism, the CO molecules directly react with the activated O2, then forming a metastable carbonate-like intermediate state （OOCO）. The reaction may proceed via two reaction paths of OOCO → CO2 ＋ O and CO ＋ OOCO → 2CO2, respectively. The calculated results show that the latter path is relatively more thermodynamically favorable with a modest energy barrier, so it should be more preferred. We expect our theoretical predictions to open a new avenue to fabricate carbon-based catalysts for CO oxidation with lower cost and higher activity.
基金supported by the National Natural Science Foundation of China(Grant Nos.41473090,41430644,11675098,41373098,41430644,and 21490585)
文摘The sheet size of a graphene oxide （GO） can greatly influence its electrical, optical, mechanical, electrochemical and catalytic property. It is a key challenge to how to control the sheet size during its preparation in different application fields. According to our previous theoretical calculations of the effect of temperature on the oxidation process of graphene, we use Hummers method to prepare GOs with different sheet sizes by simply controlling the temperature condition in the process of the oxidation reaction of potassium permanganate （KMnO4） with graphene and the dilution process with deionized water. The results detected by transmission electron microscopy （TEM） and atomic force microscopy （AFM） show that the average sizes of GO sheets prepared at different temperatures are about 1 μm and 7 μm respectively. The ultraviolet-visible spectroscopy （UV-vis） shows that lower temperature can lead to smaller oxidation degrees of GO and less oxygen functional groups on the surface. In addition, we prepare GO membranes to test their mechanical strengths by ultrasonic waves, and we find that the strengths of the GO membranes prepared under low temperatures are considerably higher than those prepared under high temperatures, showing the high mechanical strengths of larger GO sheets. Our experimental results testify our previous theoretical calculations. Compared with the traditional centrifugal separation and chemical cutting method, the preparation process of GO by temperature control is simple and low-cost and also enables large-size synthesis. These findings develop a new method to control GO sheet sizes for large-scale potential applications.
基金supported by Korea Evaluation Institute of Industrial Technology(KEIT)grant funded by the Korea Government(MOTIE)(RS-2022-00154720,Technology Innovation Program Development of next-generation power semiconductor based on Si-on-SiC structure)the National Research Foundation of Korea(NRF)by the Korea government(RS-2023-NR076826)Global-Learning&Academic Research Institution for Master's·PhD students,and Postdocs(LAMP)Program of the National Research Foundation of Korea(NRF)by the Ministry of Education(No.RS-2024-00443714).
文摘Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic structure light pressure electric generator(Basic-LPEG),which utilized a layered configuration of Ag/Pb(Zr,Ti)O_(3)(PZT)/Pt/GaAs to generate electricity based on light-induced pressure on the PZT.In this study,we sought to enhance the performance of this Basic-LPEG by introducing Ag nanoparticles/graphene oxide(AgNPs/GO)composite units(NP-LPEG),creating upgraded harvesting device.Specifically,by depositing the AgNPs/GO units twice onto the Basic-LPEG,we observed an increase in output voltage and current from 241 mV and 3.1μA to 310 mV and 9.3μA,respectively,under a solar simulator.The increase in electrical output directly correlated with the intensity of the light pressure impacting the PZT,as well as matched the Raman measurements,finite-difference time-domain simulations,and COMSOL Multiphysics Simulation.Experimental data revealed that the enhancement in electrical output was proportional to the number of hot spots generated between Ag nanoparticles,where the electric field experienced substantial amplification.These results underline the effectiveness of AgNPs/GO units in boosting the light-induced electric generation capacity,thereby providing a promising pathway for high-efficiency energy harvesting devices.
基金supported by the National Natural Science Foundation of China (21225730,91326202,and 21577032)the Fundamental Research Funds for the Central Universities (JB2015001)Furong Scholarship of Hunan Province
文摘With the fast development of nanoscience and nanotechnology,the nanomaterials have attracted multidisciplinary interests.The high specific surface area and large numbers of oxygen-containing functional groups of graphene oxides(GOs) make them suitable in the preconcentration and solidification of radionuclides from wastewater.In this paper,mainly based on the recent work carried out in our laboratory,the efficient elimination of radionuclides using GOs and GO-based nanomaterials as adsorbents are summarized and the interaction mechanisms are discussed from the results of batch techniques,surface complexation modeling,spectroscopic analysis and theoretical calculations.This review is helpful for the understanding of the interactions of radionuclides with GOs and GO-based nanomaterials,which is also crucial for the application of GOs and GO-based nanomaterials in environmental radionuclide pollution management and also helpful in nuclear waste management.
基金supported by the Deanship of Scientific Research,King Abdulaziz University(41-130-36-Hi Ci)
文摘The graphene oxides （GOs） have attracted multidisciplinary study because of their special physicochemical properties. The high surface area and large amounts of oxygen-containing functional groups make GOs suitable materials for the efficient elimination of heavy metal ions from aqueous solutions. Herein the sorption of Ni（Ⅱ） on GOs was studied using batch experi- ments, and the results showed that the sorption of Ni（Ⅱ） is strongly dependent on pH and ionic strength at pH〈8, and inde- pendent of ionic strength at pH〉8. The sorption of Ni（Ⅱ） is mainly dominated by outer-sphere surface complexation and ion exchange at low pH, and by inner-sphere surface complexation at high pH. The interaction of Ni（Ⅱ） with GOs was also inves- tigated by theoretical density functional theory （DFT） calculations, and the results show that the sorption of Ni（Ⅱ） on GOs is mainly attributed to the -COH and -COC groups and the DFT calculations show that Ni（Ⅱ） forms stable GO_Ni_triplet struc- ture with the binding energy of -39.44 kcal/mol, which is in good agreement with the batch sorption experimental results. The results are important for the application of GOs as adsorbents in the efficient removal of Ni（Ⅱ） from wastewater in environ- mental pollution cleanup.
基金supported by the National Natural Science Foundation of China(21225730,91326202)the Fundamental Research Funds for the Central Universities+2 种基金the Jiangsu Provincial Key Laboratory of Radiation Medicine,Protectionthe Priority Academic Program Development of Jiangsu Higher Education InstitutionsMCTL Visiting Fellowship Program from Key Laboratory of Marine Chemistry Theory and Technology(Ocean University of China),Ministry of Education
文摘Graphene oxides(GOs) were synthesized via modified Hummers method, and were applied as adsorbents to remove radionuclides from large volumes of aqueous solutions. The single and competitive sorption of four radionuclides(i.e., U(VI), 152+154Eu(III), 85+89Sr(II) and 134Cs(I)) on the GOs from aqueous solutions were investigated as a function of p H, ionic strength and radionuclide initial concentrations using batch technique. The results showed that the GOs had much higher sorption capacity than many other contemporary materials, for the preconcentration of radionuclides from large volumes of aqueous solutions. The sorption of radionuclides on GOs obeyed the Langmuir model, and was mainly attributed to surface complexation via the coordination of radionuclides with the oxygen-containing functional groups on GO surfaces. The competitive sorption results indicated that the selectivity sorption capacities were U(VI)>Eu(III)>Sr(II)>Cs(I). The GOs are suitable materials for the efficient removal and preconcentration of radionuclides from aqueous solutions in nuclear waste management and environmental pollution cleanup.
基金Sanya Science and Education Innovation Park of Wuhan University of Technology(No.2022KF0013)the Natural Science Foundation of Hainan Province of China(No.623MS068)+1 种基金the PhD Scientific Research and Innovation Foundation of Sanya Yazhou Bay Science and Technology City(No.HSPHDSRF-2023-03-013)the National Natural Science Foundation of China(Nos.22279097 and 62001338).
文摘With the increasing popularity of wearable electronic devices,there is an urgent demand to develop electronic textiles(e-textiles)for device fabrication.Nevertheless,the difficulty in reconciliation between conductivity and manufacturing costs hinders their large-scale practical applications.Herein,we reported a facile and economic method for preparing conductive e-textiles.Specifically,nonconductive polypropylene(PP)was wrapped by reduced graphene oxide(rGO),followed by the electrodeposition of Ni nanoparticles(NPs).Notably,modulating the sheet size of graphene oxide(GO)resulted in controllable deposition of Ni NPs with adjustable size,allowing for controlled manipulations over the structures,morphologies,and conductivity of the obtained e-textiles,which influenced their performance in electrochemical glucose detection subsequently.The optimal material,denoted as Ni/rGO+(0.2)/PP,exhibited an impressive conductivity of 7.94×10^(4)S·m^(−1).With regard to the excellent conductivity of the as-prepared e-textiles and the high electrocatalytic activity of Ni for glucose oxidation,the asprepared e-textiles were subjected to glucose detection.It was worth emphasizing that the Ni/rGO_(0.2)/PP-based electrode demonstrated promising performance for nonenzymatic/label-free glucose detection,with a detection limit of 0.36μM and a linear response range of 0.5μM to 1 mM.This study paves the way for further development and application prospects of conductive etextiles.
基金supported by the National Natural Science Foundation of China (21207136, 21272236, 21225730, 21577032, 91326202)the Chinese National Fusion Project for ITER (2013GB110005)+1 种基金the Fundamental Research Funds for the Central Universities (JB2015001)the Jiangsu Provincial Key Laboratory of Radiation Medicine and Protection and the Priority Academic Program Development of Jiangsu Higher Education Institutions are acknowledged
文摘Ozone was used to oxidize graphene oxides （GO） to generate ozonated graphene oxides （OGO） with higher oxygen-containing functional groups. The as-prepared OGO was characterized by Fourier transformed infrared spectroscopy （FTIR）, scanning electron microscopy （SEM） and X-ray photoelectron spectroscopy （XPS）. Based on the results of potentiometric acid-base ti- trations, the total carboxylic acid concentration on OGO surface was calculated to be 3.92 retool/g, which was much higher than that on GO surface. The results of adsorption experiments indicated that the adsorption capacities of OGO for Sr（II） and U（VI） removal were improved significantly after ozonization.
基金supported by the Fundamental Research Funds for the Central Universities(BLYJ201509)the Fundamental Research Funds for the Central Universities(TD-JC-2013-3)+4 种基金the Program for New Century Excellent Talents in University(NCET-12-0787)Beijing Nova Programme(Z131109000413013)the National Natural Science Foundation of China(51308045)the Foundation of State Key Laboratory of Coal Conversion(Grant No.J14-15-309)Institute of Coal Chemistry,Chinese Academy of Sciences
文摘In this contribution, a novel high-temperature CO_2 adsorbent consisting of Mg-Al layered double hydroxide （LDH） and graphene oxide （GO） nanosheets was prepared and evaluated. The nanocomposite-type adsorbent was synthesized based on the electrostatically driven self-assembly between positively charged Mg-Al LDH single sheet and negatively charged GO monolayer. The characteristics of this novel adsorbent were investigated using XRD, FE-SEM, HRTEM, FT-IR, BET and TGA. The results showed that both the CO_2 adsorption capacity and the multi- cycle stability of LDH were increased with the addition of GO owing to the enhanced particle dispersion and stabilization. In particular, the absolute CO_2 capture capacity of LDH was increased by more than twice by adding 6.54 wt% GO as support. GO appeared to be especially effective for supporting LDH sheets. Moreover, the CO_2 capture capacity of the adsorbent could be further increased by doping with 15 wt% K_2CO_3. This work demonstrated a new approach for the preparation of LDH-based hybrid-type adsorbents for CO2 capture.
基金supported by the KU Brain Pool 2017 of Konkuk University,Seoul,South KoreaFundacao para a Ciência e a Tecnologia(FCT),Portugal(SFRH/BPD/86507/2012)Centro de Quimica de Coimbra(CQC),University of Coimbra for their support
文摘One of today＇s major challenges is to provide green materials for a cleaner environment. We have conducted studies on carbon dioxide（CO2） adsorption and conversion to valuable products by an ecofriendly approach based in chitosan/graphene oxide（CSGO） nanocomposite film. Rheological behavior indicates that the CSGO has a better solvation property than the pure chitosan. An adsorption capacity of 1.0152 mmol CO2/g of CSGO nanocomposite at4.6 bar was observed. The catalytic behavior of the CSGO nanocomposite in the presence of tetra-n-butylammonium iodide（n-Bu4 NI） as co-catalyst was evaluated for the cycloaddition of CO2 to epoxides, to give cyclic carbonates, in the absence of any solvent. These results strongly suggest that the CSGO nanocomposite may open new vistas towards the development of ecofriendly material for catalytic conversion and adsorption of CO2 on industrial scale.
基金The work was supported by the Fundamental Research Funds for the Central Universities[NJ2022002]National Key Research and Development Program of China[2019YFA0705400]+1 种基金National NSF of China[1221101035,12225205,22073048]Research Fund of State Key Laboratory of Mechanics and Control of Mechanical Structures[MCMS-I-0422K01].
文摘Developing high-performance nanostructured materials is key to deliver the potential of hydrovoltaic technology into practical applications.As single-component materials have approached its limit in generating hydrovoltaic electricity,the development of multi-component hydrovoltaic materials has been necessary in continuously boosting the electricity output.Here,we report a hydrovoltaic material by integrating reduced graphene oxides and polypyrrole nanoparticles(rGO/PPy),where the rGO contributes improved conductivity and large specific surface area while PPy nanoparticles enable enhanced interaction with water.The device fabricated with this material generates a short-circuit current of 6μA as well as a maximum power density of over 1μW/cm3 from natural evaporation of water.And the substantial ion-PPy interaction enables robust voltage generation from evaporation of various salt solutions.Moreover,an outstanding scaling ability is demonstrated by connecting 10 devices in series that generate a sustainable voltage of up to~2.5 V,sufficing to power many commercial devices,e.g.LED bulb and LCD screen.
基金supported by the National Natural Science Foundation of China (21272093)the Special-ized Research Fund for the Doctoral Program of Higher Education of China (20120061120117)the Innovation Program of the State Key Laboratory of Supramolecular Structure and Materials,and the Key Laboratory of Pesticide and Chemical Biology,Ministry of Education,Central China Normal University (201301A01).
文摘Carboxylated pillar[5]arene(CP5)macrocycles were modified onto the surface of reduced graphene oxide(RGO)via covalent bonds to form new pillarene-functionalized RGO nanosheets,i.e.,RGO-CP5.The obtained RGO-CP5 nanosheets capable of molecular recognition exhibited much better water-dispersibility and enhanced fluorescence-quenching property as compared with native RGO.This new sensing platform holds great potentials in the sensing and detection of analytes,such as organic dye molecules and pesticides,in aqueous solutions.
基金supported by the National Natural Science Foundation of China(No.61904073)Spring City Plan-Special Program for Young Talents(No.K202005007)+4 种基金Yunnan Talents Support Plan for Yong Talents(No.XDYC-QNRC-20220482)Yunnan Local Colleges Applied Basic Research Projects(No.202101BA070001-138)Scientific Research Fund of Yunnan Education Department(No.2023Y0883)Frontier Research Team of Kunming University 2023Key Laboratory of Artificial Microstructures in Yunnan Higher Education。
文摘Silicon-air batteries(SABs),a new type of semiconductor air battery,have a high energy density.However,some side reactions in SABs cause Si anodes to be covered by a passivation layer to prevent continuous discharge,and the anode utilization rate is low.In this work,reduced graphene oxide(RGO)fabricated via high-temperature annealing or L-ascorbic acid(L.AA)reduction was first used to obtain Si nanowires/RGO-1000(Si NWs/RGO-1000)and Si nanowires/RGO-L.AA(Si NWs/RGO-L.AA)composite anodes for SABs.It was found that RGO suppressed the passivation and self-corrosion reactions and that SABs using Si NWs/RGO-L.AA as the anode can discharge for more than 700 h,breaking the previous performance of SABs,and that the specific capacity was increased by 90.8%compared to bare Si.This work provides a new solution for the design of high specific capacity SABs with nanostructures and anode protective layers.
基金supported by the following funds:The National Natural Science Foundation of China(Nos.52275393,51935014,and 82072084)Jiangxi Provincial Natural Science Foundation of China(No.20224ACB204013)+2 种基金The Project of State Key Laboratory of Precision Manufacturing for Extreme Service Performancethe National Key Research and Development Program of China(No.2023YFB4605800)the Independent Exploration and Innovation Project of Central South University(No.1053320221707).
文摘Fast electron-hole recombination issues during titanium dioxide(TiO_(2))photocatalysis limit its application in preventing bacterial infection during bone defect repair.In this study,TiO_(2)@reduced graphene oxide(rGO)composites were synthesized using a hydrothermal method in which rGO,which possesses very high electrical conductivity,promotes the separation of photoelectron-hole pairs of TiO_(2),thus improving the efficiency of photocatalytic production of reactive oxygen species(ROS).Subsequently,TiO_(2)@rGO composites were introduced into poly-L-lactic acid(PLLA)to prepare bone scaffolds with photocatalytic antibacterial function via selective laser sintering.The results showed that TiO_(2)grew on the surface of rGO and formed a covalent bond connection(Ti-O-C)with rGO.A decreased electrochemical impedance of TiO_(2)@rGO composites was observed,and the transient photocurrent intensity increased from 0.05 to 0.5μA/cm^(2).Analysis of electron spin resonance found that the photocatalytic products of TiO_(2)were·OH and·O^(2-),two kinds of ROS capable of killing bacteria via disrupting the structure of the bacterial membrane in vitro.Antibacterial experiments showed that the PLLA/TiO_(2)@rGO scaffolds had good antibacterial properties against Escherichia coli and Staphylococcus aureus.Finally,we report that these scaffolds exhibited both enhanced mechanical properties due to the addition of TiO_(2)@rGO as a reinforcement material and good biocompatibility during cell proliferation.
基金support of the Key Science Research Project in Colleges and Universities of Anhui Province,China(No.2022AH050813)the Medical Special Cultivation Project of Anhui University of Science and Technology,China(No.YZ2023H2A002).
文摘Carbon-based foams with a three-dimensional structure can serve as a lightweight template for the rational design and control-lable preparation of metal oxide/carbon-based composite microwave absorption materials.In this study,a flake-like nickel cobaltate/re-duced graphene oxide/melamine-derived carbon foam(FNC/RGO/MDCF)was successfully fabricated through a combination of solvo-thermal treatment and high-temperature pyrolysis.Results indicated that RGO was evenly distributed in the MDCF skeleton,providing ef-fective support for the load growth of FNC on its surface.Sample S3,the FNC/RGO/MDCF composite prepared by solvothermal method for 16 h,exhibited a minimum reflection loss(RL_(min))of-66.44 dB at a thickness of 2.29 mm.When the thickness was reduced to 1.50 mm,the optimal effective absorption bandwidth was 3.84 GHz.Analysis of the absorption mechanism of FNC/RGO/MDCF revealed that its excellent absorption performance was primarily attributed to the combined effects of conduction loss,multiple reflection,scattering,in-terface polarization,and dipole polarization.
基金supported by the National Natural Science Foundation of China(51971157)Shenzhen Science and Technology Program(JCYJ20210324115412035,JCYJ202103-24123202008,JCYJ20210324122803009 and ZDS-YS20210813095534001)Guangdong Foundation for Basic and Applied Basic Research Program(2021A1515110880).
文摘In pursuit of more efficient and stable electrochemical energy storage materials,composite materials consisting of metal oxides and graphene oxide have garnered significant attention due to their unique structures and exceptional properties.Graphene oxide(GO),a two-dimensional material with an extremely high specific surface area and excellent conductivity,offers new possibilities for enhancing the electrochemical performance of metal oxides.In this work,we synthesized met-al-organic framework(MOF)and GO composites by regulating the amount of GO,and successfully prepared composites of metal oxides supported by nitrogen-doped carbon frameworks and GO through a simple one-step calcination process.Based on the electrochemical tests,the optimal amount of GO was determined.This research will provide new insights into and directions for designing and synthesizing metal oxide and graphene oxide composite materials with an ideal electro-chemical performance.
文摘The demand for high-energy-density sodium-ion batteries has driven research to increase the hard carbon(HC)plateau capacity(<0.1 V),but the plateau capacity-rate capability trade-off limits performance.We report a way to regulate the closed pore structure and improve the rate capability of HC by the addition of graphene oxide using an emulsification process.In a non-emulsion system,graphene oxide not only shortens ion diffusion paths by inducing the formation of flakelike HC but also significantly improves the rate performance by serving as conductive bridges within the carbon matrix.The prepared graphene/phenolic resin carbon composite has reversible capacities of 362,340,319,274,119,86,69 and 48 mAh g^(−1)at current densities of 0.02,0.05,0.1,0.2,0.5,1,2 and 5 A g^(−1),respectively.When emulsification is introduced,the graphene oxide acts as a nano-confinement template,guiding the cross-linking of phenolic resin to form uniformly sized closed pores.This composite electrode material has the highest plateau capacity of 268 mAh g^(−1)at 20 mA g^(−1).
基金supported by Gansu Provincial Science and Technology Plan(23CXGA0195)Longnan Science and Technology Plan(2024CX03)。
文摘Graphene oxide nanomaterials are increasingly used in various fields due to their superior properties.In order to study the influence of graphene oxide additives on the performance of modified asphalt,in this study,graphene oxide modified asphalt was prepared and characteristics was studied including the high deformation resistance performance and the self-healing property of modified asphalt.Functional groups and morphology of graphene oxide modified asphalt were described by Fourier transform infrared spectroscopy.The high deformation resistance performance and self-healing effect of asphalt samples were obtained through dynamic slear rheometer(DSR)test.Results shows that graphene oxide dispersions improve the performance of asphalt relatively well compared to graphene oxide powder.There is no chemical reaction between graphene oxide and asphalt,but physical connection.The addition of graphene oxide improved the high deformation resistance of modified asphalt and expedited the self-healing ability of asphalt under fatigue load.
文摘Graphene oxide (GO) reduced by Stachys lavandulifolia extract (SLE) was produced and characterised. The anti-corrosion behaviour of epoxy coatings containing GO and rGO nanosheets was investigated. FESEM-EDS, FT-IR, and Raman spectroscopy were used to examine the microstructure and chemical composition of the nanosheets and epoxy coatings. EIS experiment was used to explore the corrosion behaviour of the coatings. The O/C ratio for GO and rGO-SLE was found to be 2.5 and 4.5, indicating a decrease in the carbon content after the reduction of GO, confirming the adsorption of SLE onto the GO nanosheets. The successful reduction of GO in the presence of SLE particles was confirmed by disappearing the C=O peak and a significant decrease in the C-O-C bond intensity. The epoxy/rGO- SLE coatings exhibited the highest double-layer thickness and excellent corrosion resistance compared to neat epoxy and epoxy/GO coatings, emphasizing the significant role of rGO in enhancing the protective performance of epoxy coatings. The highest values for total charge transfer and film resistances and the inhibition efficiency were observed to be 6529 Ω·cm^(2) and 90%, respectively, for the epoxy/rGO-SLE coated steel plate. It was also found that the epoxy/0.15 wt.% rGO-SLE coating demonstrates the best corrosion resistance performance.
