Five forging experiments were designed and conducted to investigate the effect of process parameters on microstructure evolution during hot deformation for X12CrMoWVNbN10-1-1 steel.The experimental results indicated t...Five forging experiments were designed and conducted to investigate the effect of process parameters on microstructure evolution during hot deformation for X12CrMoWVNbN10-1-1 steel.The experimental results indicated that average grain size became finer with the increasing number of upsetting and stretching.Especially,the size of stretching three times with upsetting twice had the most remarkable effect on refinement,and the size was only 27.36%of the original one.Moreover,the stress model was integrated into the software and finite element models were established.Simulation results demonstrated that the strain at center point of workpiece was far larger than critical strain value in each process,so that dynamic recrystallization(DRX) occurred in each workpiece,which implied DRX could occur for several times with the increasing number of upsetting and stretching,and uniform finer microstructure would be obtained.However,the results also showed that higher temperature was an unfavorable factor for grain refinement,so the times of heating should be limited for workpiece,and as many forging processes as possible should be finished in once heating.展开更多
An understanding of the sedimentary environment in relation to its controlling factors is of great importance in coastal geomorphology,ecology,tourism and aquaculture studies.We attempt to deal with this issue,using a...An understanding of the sedimentary environment in relation to its controlling factors is of great importance in coastal geomorphology,ecology,tourism and aquaculture studies.We attempt to deal with this issue,using a case study from the Xincun Lagoon,Hainan Island in southern China.For the study,surficial sediment samples were collected,together with hydrodynamic and bathymetric surveys,during August 2013.Numerical simulation was carried out to obtain high-spatial resolution tidal current data.The sediment samples were analyzed to derive mean grain size,sorting coefficient,skewness and kurtosis,together with the sand,silt and clay contents.The modern sedimentary environments were classified using system cluster and principal component analyses.Grain size analysis reveals that the sediments are characterized by extremely slightly sandy silty mud（ESSSM） and slightly silty sand（SSS）,which are distributed in the central lagoon and near-shore shallow water areas,respectively.Mean grain size varies from 0 to 8.0Ф,with an average of 4.6Ф.The silt content is the highest,i.e.,52% on average,with the average contents of sand and clay being 43% and 5%,respectively.There exists a significant correlation between mean size and water depth,suggesting that the surficial sediments become finer with increasing water depth.Cluster analyses reveals two groups of samples.The first group is characterized by mean grain size of more than 5.5Ф,whilst the second group has mean grain size of below 3.5Ф.Further,these groups also have different correlations between mean grain size and the other grain size parameters.In terms of the tidal current,the average values of the root mean square velocity（RMSV） are 7.5 cm/s and 6.9 cm/s on springs and neaps,respectively.For the RMSVs that are higher than 4 cm/s,a significant positive correlation is found between the content of the 63–125 μm fraction and the RMSV,suggesting that the RMSV determines the variability of the very fine sand fraction.Based on system cluster and principal component analyses（PCA）,the modern sedimentary environments are classified into three types according to the grain size parameters,RMSVs and water depth data.The results suggest the importance of grain size parameters and high-spatial resolution hydrodynamic data in differentiating the coastal sedimentary environments.展开更多
In the shaping process of cross wedge rolling（CWR）, metal undergoes a complex microstructural evolution, which affects the quality and mechanical properties of the product. Through secondary development of the DEFOR...In the shaping process of cross wedge rolling（CWR）, metal undergoes a complex microstructural evolution, which affects the quality and mechanical properties of the product. Through secondary development of the DEFORM-3D software, we developed a rigid plastic finite element model for a CWR-processed rear axle tube, coupled with thermomechanical and microstructural aspects of workpieces. Using the developed model, we investigated the microstructural evolution of the CWR process. Also, the influence of numerous parameters, including the initial temperature of workpieces, the roll speed, the forming angle, and the spreading angle, on the grain size and the grain-size uniformity of the rolled workpieces was analyzed. The numerical simulation was verified through rolling and metallographic experiments. Good agreement was obtained between the calculated and experimental results, which demonstrated the reliability of the model constructed in this work.展开更多
Ultrafine grain size is often achieved by severe plastic deformation. A few techniques have been devel- oped to achieve severe plastic deformation,such as equal channel angular (ECA ) processing, torsion, and accumu...Ultrafine grain size is often achieved by severe plastic deformation. A few techniques have been devel- oped to achieve severe plastic deformation,such as equal channel angular (ECA ) processing, torsion, and accumulative roll bonding (ARB) techmpues. This paper will introduce a moftiaxis deformation technique which can achieve essentially unlimited strain with constant deformation volume. The mul- tiaxis deformation can be fully restrained or unrestrained.The bulk volume of a multiaxis restraint compression specimen can be easily machined into mechanical testing specimens for mechanical property measurement and other studies.展开更多
基金the National Science and Technology Major Project of China(No.2012ZX04012-011-02)the National Basic Research Program(973)of China(No.2011CB012903)
文摘Five forging experiments were designed and conducted to investigate the effect of process parameters on microstructure evolution during hot deformation for X12CrMoWVNbN10-1-1 steel.The experimental results indicated that average grain size became finer with the increasing number of upsetting and stretching.Especially,the size of stretching three times with upsetting twice had the most remarkable effect on refinement,and the size was only 27.36%of the original one.Moreover,the stress model was integrated into the software and finite element models were established.Simulation results demonstrated that the strain at center point of workpiece was far larger than critical strain value in each process,so that dynamic recrystallization(DRX) occurred in each workpiece,which implied DRX could occur for several times with the increasing number of upsetting and stretching,and uniform finer microstructure would be obtained.However,the results also showed that higher temperature was an unfavorable factor for grain refinement,so the times of heating should be limited for workpiece,and as many forging processes as possible should be finished in once heating.
基金The National Natural Science Foundation of China under contract No.41530962
文摘An understanding of the sedimentary environment in relation to its controlling factors is of great importance in coastal geomorphology,ecology,tourism and aquaculture studies.We attempt to deal with this issue,using a case study from the Xincun Lagoon,Hainan Island in southern China.For the study,surficial sediment samples were collected,together with hydrodynamic and bathymetric surveys,during August 2013.Numerical simulation was carried out to obtain high-spatial resolution tidal current data.The sediment samples were analyzed to derive mean grain size,sorting coefficient,skewness and kurtosis,together with the sand,silt and clay contents.The modern sedimentary environments were classified using system cluster and principal component analyses.Grain size analysis reveals that the sediments are characterized by extremely slightly sandy silty mud（ESSSM） and slightly silty sand（SSS）,which are distributed in the central lagoon and near-shore shallow water areas,respectively.Mean grain size varies from 0 to 8.0Ф,with an average of 4.6Ф.The silt content is the highest,i.e.,52% on average,with the average contents of sand and clay being 43% and 5%,respectively.There exists a significant correlation between mean size and water depth,suggesting that the surficial sediments become finer with increasing water depth.Cluster analyses reveals two groups of samples.The first group is characterized by mean grain size of more than 5.5Ф,whilst the second group has mean grain size of below 3.5Ф.Further,these groups also have different correlations between mean grain size and the other grain size parameters.In terms of the tidal current,the average values of the root mean square velocity（RMSV） are 7.5 cm/s and 6.9 cm/s on springs and neaps,respectively.For the RMSVs that are higher than 4 cm/s,a significant positive correlation is found between the content of the 63–125 μm fraction and the RMSV,suggesting that the RMSV determines the variability of the very fine sand fraction.Based on system cluster and principal component analyses（PCA）,the modern sedimentary environments are classified into three types according to the grain size parameters,RMSVs and water depth data.The results suggest the importance of grain size parameters and high-spatial resolution hydrodynamic data in differentiating the coastal sedimentary environments.
基金support given by the National Natural Science Foundation of China (No.51505026)
文摘In the shaping process of cross wedge rolling（CWR）, metal undergoes a complex microstructural evolution, which affects the quality and mechanical properties of the product. Through secondary development of the DEFORM-3D software, we developed a rigid plastic finite element model for a CWR-processed rear axle tube, coupled with thermomechanical and microstructural aspects of workpieces. Using the developed model, we investigated the microstructural evolution of the CWR process. Also, the influence of numerous parameters, including the initial temperature of workpieces, the roll speed, the forming angle, and the spreading angle, on the grain size and the grain-size uniformity of the rolled workpieces was analyzed. The numerical simulation was verified through rolling and metallographic experiments. Good agreement was obtained between the calculated and experimental results, which demonstrated the reliability of the model constructed in this work.
文摘Ultrafine grain size is often achieved by severe plastic deformation. A few techniques have been devel- oped to achieve severe plastic deformation,such as equal channel angular (ECA ) processing, torsion, and accumulative roll bonding (ARB) techmpues. This paper will introduce a moftiaxis deformation technique which can achieve essentially unlimited strain with constant deformation volume. The mul- tiaxis deformation can be fully restrained or unrestrained.The bulk volume of a multiaxis restraint compression specimen can be easily machined into mechanical testing specimens for mechanical property measurement and other studies.
