BACKGROUND An echocardiogram is an essential tool in the evaluation of potential kidney transplant recipients(KTRs).Despite cardiac clearance,potential KTRs still have structural and functional abnormalities.Identifyi...BACKGROUND An echocardiogram is an essential tool in the evaluation of potential kidney transplant recipients(KTRs).Despite cardiac clearance,potential KTRs still have structural and functional abnormalities.Identifying the prevalence of these abnormalities and understanding their predictors is vital for optimizing pretransplant risk stratification and improving post-transplant outcomes.AIM To determine the prevalence of left ventricular hypertrophy(LVH),left ventricular systolic dysfunction(LVSD),diastolic dysfunction(DD),pulmonary hypertension(PH),and their predictors,and to assess their impact on graft function in pre-transplant candidates.METHODS The study included all successful transplant candidates older than 14 who had a baseline echocardiogram.Binary logistic regression models were constructed to identify factors associated with LVH,LVSD,DD,and PH.RESULTS Out of 259 patients,LVH was present in 64%(166),12%(31)had LVSD,27.5%(71)had DD,and 66(25.5%)had PH.Independent predictors of LVH included male gender[odds ratio(OR):2.51;95%CI:1.17-5.41 P=0.02],PH(OR=2.07;95%CI:1.11-3.86;P=0.02),DD(OR:2.47;95%CI:1.29-4.73;P=0.006),and dyslipidemia(OR=1.94;95%CI:1.07-3.53;P=0.03).Predictors for LVSD included patients with DD(OR=3.3,95%CI:1.41-7.81;P=0.006)and a family history of coronary artery disease(OR=4.50,95%CI:1.33-15.20;P=0.015).Peritoneal dialysis was an independent predictor for DD(OR=10.03;95%CI:1.71-58.94,P=0.011).The presence of LVH(OR=3.32,95%CI:1.05-10.55,P=0.04)and mild to moderate or moderate to severe mitral regurgitation(OR=4.63,95%CI:1.45-14.78,P=0.01)were significant factors associated with PH.These abnormalities had no significant impact on estimated glomerular filtration at discharge,6 months,1 year,or 2 years post-transplant.CONCLUSION Significant echocardiographic abnormalities persist in a potential transplant candidate despite cardiac clearance,although they don’t affect future graft function.Understanding the risk factors associated with these abnormalities may help clinicians address these factors pre-and post-transplant to achieve better outcomes.展开更多
BACKGROUND The use of induction immunosuppression agents has improved kidney transplant outcomes,but selecting the optimal agent remains a point of debate.AIM To compare the long-term outcomes of kidney transplant rec...BACKGROUND The use of induction immunosuppression agents has improved kidney transplant outcomes,but selecting the optimal agent remains a point of debate.AIM To compare the long-term outcomes of kidney transplant recipients receiving alemtuzumab vs basiliximab induction,focusing on graft function,acute rejection,infection,malignancy,post-transplant glomerulonephritis,and survival,using a propensity score matched cohort design.METHODS Kidney transplant recipients who received alemtuzumab or basiliximab induction from 2014 to 2019 across two nephrology centres in Northwest England were evaluated.Propensity score matching at a 1:1.5 ratio ensured comparability between cohorts.Baseline characteristics,immunosuppression regimens,and outcomes were analyzed.Linear,binary logistic and Cox proportional hazard regression models.RESULTS A total of 436 recipients were included,with a median follow-up of 5.2 years.The matched cohort(n=262)had a mean age of 51.1±13.5 years;39%were female and 92%were white.There was no significant difference in the cumulative incidence of acute rejection[odds ratio(OR)=2.10;95%CI:0.9-4.9;P=0.110].Compared with basiliximab,alemtuzumab was associated with lower estimated glomerular filtration rate at 12 months(-6.6 mL/minute/1.73 m2;95%CI:-10.5 to-2.7;P<0.001)and higher risks of cytomegalovirus viremia(OR=3.2;95%CI:1.6-6.5;P<0.001),BK viremia(OR=2.4;95%CI:1.1-5.5;P=0.02),post-transplant malignancy(OR=6.2;95%CI:1.6-29.9;P=0.013),and death-censored graft loss(hazard ratio=3.6;95%CI:1.2-11.4;P=0.03).No significant differences were observed in post-transplant glomerulonephritis or recipient mortality.CONCLUSION In this propensity score-matched analysis,alemtuzumab induction was associated with lower graft function at 12 months and higher risks of viral infection,post-transplant malignancy,and graft loss compared with basiliximab.These findings highlight the need for further studies to confirm the long-term safety and effectiveness of alemtuzumab in kidney transplantation.展开更多
AIM:To investigate the effect of pentagonal conjunctival autograft on reducing graft retraction following pterygium surgery.METHODS:This retrospective comparative study included patients who underwent primary pterygiu...AIM:To investigate the effect of pentagonal conjunctival autograft on reducing graft retraction following pterygium surgery.METHODS:This retrospective comparative study included patients who underwent primary pterygium excision with either pentagonal(created by shaping the junction with the recipient conjunctiva into a wedge)or quadrangular conjunctival autograft transplantation.All patients completed a 6mo postoperative follow-up.The primary outcome measure was the incidence of graft retraction;secondary outcomes included graft displacement requiring re-suturing and pterygium recurrence rate.RESULTS:The study enrolled 58 participants,comprising 26(15 males,11 females)in the pentagonal graft group(mean age:54.9±13.1y),and 32(17 males,15 females)in the quadrangular graft group(mean age:57.6±10.4y).Graft retraction occurred in only 1 eye(3.8%)in the pentagonal autograft group,compared to 9 eyes(28.1%)in the quadrangular autograft group.No cases of graft displacement requiring re-suturing were reported in the pentagonal autograft group.Although graft displacement and recurrence requiring re-suturing were observed less frequently in surgeries with a pentagonal graft,the difference was not statistically significant(P>0.05).CONCLUSION:Designing the conjunctival autograft in a pentagonal shape—mimicking geodesic dome architecture and conforming to the eye’s spherical structure—enhances compatibility with the recipient conjunctiva and improves resistance to physical traction forces.This design effectively reduces the incidence of graft retraction and other related complications,providing a more favorable surgical option for pterygium treatment.展开更多
Grafting of poly(methyl methacrylate)from narrow disperse polymer particles by surface-initiated atom transferradical polymerization(ATRP)was investigated.Polydivinylbenzene(PDVB)particles were prepared by dispersionp...Grafting of poly(methyl methacrylate)from narrow disperse polymer particles by surface-initiated atom transferradical polymerization(ATRP)was investigated.Polydivinylbenzene(PDVB)particles were prepared by dispersionpolymerization with poly(N-vinyl pyrrolidone)(PVP)as the stabilizer.Chloromethylated PDVB was used as initiating coresites for subsequent ATRP of methyl methacrylate with CuBr/bpy as catalyst system.It was found that poly(methylmethacrylate)was grafted not only from the particle surfaces but also from within a thin shell layer,leading to particles sizeincreases from 2.38-3.00 μm with a core-shell structure particles.The grafted core-shell particles were characterized withFTIR,SEM,DSC.展开更多
Photo-grafting of hydrophilic monomer was used to enhance the hydrophilicity of poly（ether ether ketone） （PEEK） with the aim of extending its applications to biological fields. PEEK sheets were surface modified by...Photo-grafting of hydrophilic monomer was used to enhance the hydrophilicity of poly（ether ether ketone） （PEEK） with the aim of extending its applications to biological fields. PEEK sheets were surface modified by grafting of acrylamide（AAm） with ultraviolet（UV） irradiation in the presence or absence of benzophenone（BP）. The effects of BP, irradiation time and monomer concentration on the surface wettability of PEEK were investigated. Characteriza tion of modified PEEK using scanning electron microscopy（SEM）, energy-disperse spectrometer（EDS） and water contact angle measurements shows that AAm was successfully grafted on PEEK surface both in presence and absence of BP. With the increase in irradiation time and monomer concentration, contact angles decrease to as low as 30°, demonstrating a significant improvement of surface hydrophilicity. In agreement with the decrease in contact angle, under identical conditions, the nitrogen concentration increases, suggesting the increase in grafting degree of the grafting polymerization. This investigation demonstrates a self-initiation of PEEK due to its BP-like structure in the backbone of the polymer. Though the graft polymerization proceeds more readily in the presence of BP, the self-initiated graft polymerization is clearly observed.展开更多
Surface modification of microporous polypropylene hollow fiber membranes was performed by radical-induced graft polymerization of N,N-dimethylaminoethyl methacrylate (DMAEMA). The influences of temperature, monomer co...Surface modification of microporous polypropylene hollow fiber membranes was performed by radical-induced graft polymerization of N,N-dimethylaminoethyl methacrylate (DMAEMA). The influences of temperature, monomer concentration and pre-adsorbed amount of benzoyl peroxide on grafting degree were studied respectively. It was found that the appropriate graft temperature was 75 'C, at which the grafting degree was the highest and the hydrolytic decomposition of DMAEMA the lowest. Scanning electron photomicrography and the average pore diameters of the modified membranes demonstrated that part of the micropores on the membrane surface was plugged by the grafted polyDMAEMA chains, especially at high grafting degree. Contact angle and water swelling experiments showed that a moderate grafting degree could improve the hydrophilicity of the membranes. In the range of 11.3%-12.0% grafting degree, the water swelling percentage reached its maximum (51.1%) and the contact angle reached its minimum (74 degrees). The bovine serum albumin (BSA) adsorption experiment indicated that the grafted polyDMAEMA had a dual effect on protein adsorption. At the first stage, the BSA adsorption decreased with increasing of DMAEMA grafting degree. As the interaction between BSA and polyDMAEMA on membrane surface increased, the BSA adsorption increased with increasing of DMAEMA grafting degree.展开更多
Ultraviolet （UV）-induced graft polymerization of acrylamide （AAm） on polypropylene substrates was successfully conducted using dibenzyl trithiocarbonate （DBTTC） as photoinitiator. It was confirmed by chemical an...Ultraviolet （UV）-induced graft polymerization of acrylamide （AAm） on polypropylene substrates was successfully conducted using dibenzyl trithiocarbonate （DBTTC） as photoinitiator. It was confirmed by chemical analysis and surface morphology observation with attenuated total reflectance Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy. A possible mechanism for this graft process was presented, which suggested that, under UV irradiation, the C： S bond in DBTTC could split and abstract a hydrogen from the polypropylene surface and a surface free radical was then formed, and initiated the graft polymerization of AAm.展开更多
By dynamic method under UV irradiation, commercial melt-blown polypropylene （PPMB） filter element was modified with acrylamide （AAm） using benzophenone （BP） as initiator. Attenuated total reflection-Fourier tran...By dynamic method under UV irradiation, commercial melt-blown polypropylene （PPMB） filter element was modified with acrylamide （AAm） using benzophenone （BP） as initiator. Attenuated total reflection-Fourier transform infrared spectroscopy and scanning electron microscope verified that polyacrylamide chain was grafted on the fiber surface of PPMB filter element. Elemental content analysis with energy dispersive X-ray of fibers revealed that the polymerization content in the inner part of filter element was relatively higher than that in the outer. Degree of grafting changed with initiator concentration, monomer concentration, reaction temperature and reached 2.6% at the reaction condition： CBp=0.06 mol/L, CAAm=2.0 mol/L, irradiation time： 80 min, temperature： 60℃. Relative water flux altered with the hydrophilicity and pore size of filter element. In the antifouling test, the modified filter gave greater flux recovery （approximately 70%） after filtration of the water extract of Liuweidihuang, suggesting that the fouling layer was more easily reversible due to the hydrophilic nature of the modified filter.展开更多
Abstract A novel polyglycidylmethacrylate （PGMA） microspheres with high adsorption capacity of Cr（VI） was prepared by cerium（IV） initiated graft polymerization of tentacle-type polymer chains with amino group on...Abstract A novel polyglycidylmethacrylate （PGMA） microspheres with high adsorption capacity of Cr（VI） was prepared by cerium（IV） initiated graft polymerization of tentacle-type polymer chains with amino group on polymer microspheres with hydroxyl groups. The micron-sized PGMA microspheres were prepared by a dispersion polym erization method and subsequently modified by ring-opening reaction to introduce functional hydroxyl groups. The polymer microspheres were characterized by scanning electron microscopy （SEM） and Fourier transform infrared spectroscopy （FTIR）. The results indicated that the polymer microspheres had an average diameter of 5 m with uniform size distribution. The free amino group content was determined to be 5.13 mmol·g^-1 for g;PGMA-NH2 microspheres by potentiometric and conductometric titration methods. The Cr（VI） adsorption results indicated that the graft polymerization of tentacle-type polymer chains on the polymer microspheres could produce adsorbents with high adsorption capacity （500 mg-g-l）. The polymer microspheres with grafted tentacle polymer chains have potenial application in large-scale removal of Cr（VI） in aqueous solution.展开更多
Durable superomniphobic surfaces are desirable for their practical applications,including selfcleaning,non-fouling,protective clothing and the separation of liquids.The plasma-induced polymerization of environmentally...Durable superomniphobic surfaces are desirable for their practical applications,including selfcleaning,non-fouling,protective clothing and the separation of liquids.The plasma-induced polymerization of environmentally friendly C6 from a perfluoralkyl methlacrylate copolymer emulsion,AG-E081,was performed and a durable omniphobic fabric was achieved.C6 is an ecological alternative to C8(eight CF2 groups)fluorinated compounds,and it was thereafter successfully incorporated into aramid fabric to achieve a durable superomniphobic surface.The fabric became water and oil repellent with an extremely high water contact angle of 180°.As tested by the water spray AATCC test and hydrocarbon resistance test,the as-prepared fabric gained 100°(ISO 5)and grade number 4 respectively.Furthermore,the fabrics also showed significantly improved washing durability after ten washing cycles.By scanning electron microscopy(SEM),Fourier-transform infrared spectroscopy(FTIR)and x-ray photoelectron spectroscopy(XPS)tests,it is indicated that the durable superomniphobicity can be attributed to the roughness and activation of the aramid surface by the plasma pre-treatment,which induces more adsorption and chemical graft of the C6 copolymer.展开更多
The surface of polypropylene （iPP） is modified with glow discharge plasma of Ar, so that the modified surfaces of iPP films are obtained. The studies of scanning electron microscopy （SEM） show the surface etching ...The surface of polypropylene （iPP） is modified with glow discharge plasma of Ar, so that the modified surfaces of iPP films are obtained. The studies of scanning electron microscopy （SEM） show the surface etching pattern of iPP films. The chemical structures of iPP films are confirmed by X-ray photoelectron spectroscopy （XPS） and Fourier transform infrared （FTIR） spectroscopy. The wetting properties of modified surfaces of iPP films are characterized by contact angle, and the free energy of surfaces is calculated. The free radical of modification surfaces of iPP is measured by chemical method. The surfaces of iPP are achieved with Ar plasma treatment followed by grafting copolymerization with styrene （St） in St. The grafting polymer of St onto iPP is characterized by FTIR. The grafting rate is dependent on plasma exposure time and discharge voltage. The studies show that homopolymerization of St is undergone at the sane time during the graftingcopolymerization of St onto/PP.展开更多
Copolymerization of chitosan selectively grafted by polyethylene glycol was prepared. Chitosan was selectively grafted by monomethoxy polyethylene glycol（mPEG-OH）, which contained a hydroxyl group combining with hex...Copolymerization of chitosan selectively grafted by polyethylene glycol was prepared. Chitosan was selectively grafted by monomethoxy polyethylene glycol（mPEG-OH）, which contained a hydroxyl group combining with hexamethylene diisocyanate（HDI） to form a novel macromonomer namely monomethoxy polyethylene glycol isocyanate（mPEG-NCO） containing a isocyanate group with higher chemical activity in ethyl glyoxalate solution absolutely without water. The selective grafted copolymerization of Chitosan with mPEG-NCO was conducted under heterogeneous conditions as suspension in dimethylformamide. The hydrophilic copolymers of chitosan were prepared by condensation reaction of isocyanate group on mPEG- NCO with hydroxy groups on chitosan chains because amino groups on chitosan chains were protected by complexion formation with copper ions. The effect of reaction condition on the grafting extents was discussed. Swelling properties of mPEG-g-CS were researched. The graft copolymer mPEG-g-CS was characterized by the infrared spectra. The experimental result showed that the copper ions were very effective to protect amino groups from condensation reaction. The swelling degree in water increases with adding of grafting ratio. The maximum swelling degree was up to above 132% when the grafting ratio was about 270%. The graft copolymer can be soluble partially in pure water.展开更多
Polyethylene (PE) grafting 4-vinylpyridine copolymers has been produced as powders of different rushes by theirradiation method. After treatment with methylaluminoxane (MAO), the copolymers were used as supports for C...Polyethylene (PE) grafting 4-vinylpyridine copolymers has been produced as powders of different rushes by theirradiation method. After treatment with methylaluminoxane (MAO), the copolymers were used as supports for Cp_2ZrCl_2catalyst Results of X-ray photoelectron spectroscopy, Fourier transforms infrared spectroscopy, ultraviolet spectroscopy andscanning electron microscope measurements show that the catalytic sites have been linked through MAO on the PE-graft-4-vinylpyridine (PEVP). The percentages of grafting 4-vinylpyridine and supported Cp_2ZrCl_2 depend on the size ofpolyethylene powder. The smaller the polyethylene powder, the more percent of 4-vinylpyridine groups and Cp_2ZrCl_2 existon the polyethylene chains, and the PEVP-supported catalyst has a relatively high activity for ethylene polymerization.展开更多
In this paper, the capabilities of grafting acrylonitrile (AN) onto starch initiated by Fe(III)-TU, V(V)-TU, Cr(VI)-TU, Mn(VII)-TU redox systems were compared in the presence of sulfuric acid of different concentratio...In this paper, the capabilities of grafting acrylonitrile (AN) onto starch initiated by Fe(III)-TU, V(V)-TU, Cr(VI)-TU, Mn(VII)-TU redox systems were compared in the presence of sulfuric acid of different concentrations. It was shown that the grafting capability of Mn(VII)-TU is the highest in these initiating systems. Using Mn (VII-TU as initiator, the effects of various acids (HClO4, H2SO4, HNO3, HCl) on the graft copolymerization of acrylonitrile onto starch were discussed, and the capabilities of graft copolymerization of methyl methacrylate (MMA), acrylamide (AM), acrylic acid (AA) onto starch were investigated. The experimental results show that the order of the influences of different acids is HClO4 > H2SO4 > HNO3 > HCl, and the order of grafting capabilities of different monomers grafted onto starch is MMA > AN > AM > AA. The structure and morphology of graft, copolymers were studied with infrared spectroscopy and scanning electron microscopy. The size, shape and roughness of surface of the grafted starch granules are changed after grafting.展开更多
The graft polymerization of acrylic acid(A) and acrylamide(B) was carried out onto bi-oriented polyester BOPET corona film.The influence of monomer concentration,reducer concentration and reaction time on the graft po...The graft polymerization of acrylic acid(A) and acrylamide(B) was carried out onto bi-oriented polyester BOPET corona film.The influence of monomer concentration,reducer concentration and reaction time on the graft polymerization was investigated.The surface tension of the films increased with an increase of monomer concentration,till the concentration of monomer A reached 1.5×10^(-2)g/mL and the concentration of monomer B reached 4.0×10^(-2)g/mL.The surface tension of the films reached a maximum value at 7×10^(-4)M of reducer concentration and subsequently decreased with further increase in reducer concentration.The surface tension of the films increased with the increase of the reaction time apparently within 50min.The grafted corona BOPET films were characterized with IR and XPS.The presence of graft on the film surface was confirmed.The attenuation experiments on grafted corona BOPET films in air at 50℃ and in water were carried out to investigate the persistence of graft polymerization of acrylic acid and arylamide onto BOPET corona films.展开更多
Herein, excellent UV-absorbing poly(vinylidene fluoride)(PVDF) membranes were fabricated through the pre-irradiation induced graft polymerization method. The PVDF chains irradiated with ^(60)Co γ-ray were modified wi...Herein, excellent UV-absorbing poly(vinylidene fluoride)(PVDF) membranes were fabricated through the pre-irradiation induced graft polymerization method. The PVDF chains irradiated with ^(60)Co γ-ray were modified with the polymerizable UV absorber 2-[2-hydroxy-5-[2-(methacryloyloxy)ethyl]phenyl]-2 H-benzotriazole(RUVA-93). The influences of irradiation dose and monomer concentration on the prepared PVDF-g-PRUVA-93 membranes were investigated, and the optimal condition was eventually obtained. The chemical structures of the films were studied by ~1H-NMR, FTIR, and XRD. UV light transmittance and DSC tests were used to characterize the UV-absorbing performance and thermal property of the PVDF films before and after modification. The results proved that the PRUVA-93 side chains were successfully incorporated into the PVDF main chains and the obtained PVDF-g-PRUVA-93 films possessed remarkable UV-absorbing property. The modified membrane made under the optimized experiment condition could completely block the UV light in the range of 200-387 nm. Additionally, the transmittance of the PVDF-g-PRUVA-93 film could be reduced to0.04% in 280-320 nm, where the light irradiation could damage polymer materials most seriously.展开更多
Membrane surfaces modified with poly（N-vinyl-2-pyrrolidone） （PNVP） can be endowed with hydrophilicity, biocompatibility and functionality. In this work, atmospheric pressure dielectric barrier discharge plasma gra...Membrane surfaces modified with poly（N-vinyl-2-pyrrolidone） （PNVP） can be endowed with hydrophilicity, biocompatibility and functionality. In this work, atmospheric pressure dielectric barrier discharge plasma graft polymerization of N-vinyl-2-pyrrolidone （NVP） onto polypropylene （PP） microporous membrane surface was studied. The experimental results reveal that plasma treatment conditions, such as discharge power, treatment time and adsorbed NVP amount, have remarkable effects on the grafting degree of NVP. Structural and morphological changes on the membrane surfaces were characterized by attenuated total reflection-Fourier transform infrared spectroscopy （FT-IR/ATR）, X-ray photoelectron spectroscope （XPS） and field emission scanning electron microscopy （FE-SEM）. Water contact angles of the membrane surfaces were also measured by the sessile drop method. Water contact angles on the membrane surfaces decrease with the increase of NVP grafting degree, which indicates an enhanced hydrophilicity for the modified membranes. The effects of grafting degrees on pure water fluxes were also measured. It is shown that pure water fluxes increase with grafting degree firstly and then decrease adversely. Finally, filtration of bovine serum albumin （BSA） solution and platelets adhesion of the PNVP modified membranes show good protein resistance and potential biocompatibility due to the enhancement of surface hydrophilicity.展开更多
In homogeneous media, N,N-Dimethylacrylamide (DMA) was grafted copolymerization to cellulose by a metal-catalyzed atom transfer radical polymerization (ATRP) process. First, cellulose was dissolved in DMAc/LiCl system...In homogeneous media, N,N-Dimethylacrylamide (DMA) was grafted copolymerization to cellulose by a metal-catalyzed atom transfer radical polymerization (ATRP) process. First, cellulose was dissolved in DMAc/LiCl system, and it reacted with 2-bromoisobutyloyl bromide (BiBBr) to produce macroinitiator (cell-BiB). Then DMA was polymerized to the cellulose backbone in a homogeneous DMSO solution in presence of the cell-BiB. Characterization with FT-IR, NMR, and GPC measurements showed that there obtained a graft copolymer with cellulose backbone and PDMA side chains (cell-PDMA) in well-defined structure. The proteins adsorption studies showed that the cellulose membranes modified by the as-prepared cell-PDMA copolymer owns good protein adsorption resistancet.展开更多
2,2,3,3,4,4,5,5-Octafluoropentyl acrylate was grafted onto silk fiber in a two-step heterogeneous system through the vinyl bonds of acryloyloxyethyl isocyanate modified on the silk.The grafted copolylner was analyzed ...2,2,3,3,4,4,5,5-Octafluoropentyl acrylate was grafted onto silk fiber in a two-step heterogeneous system through the vinyl bonds of acryloyloxyethyl isocyanate modified on the silk.The grafted copolylner was analyzed by FTIR and WAXD,and the results revealed that the fluoroacrylate was successfully grafted onto silk fiber and the crystalline structure of silk fibroin withβ-sheet structure was not changed after graft copolymerization.The FT-IR corrected method was used to simulate the grafting yield onto sil...展开更多
Ultraviolet （UV）-induced graft copolymerization of allyl acetate （AA） monomer onto poly（ethylene terephthalate） （PET） films and the subsequent sulfonation on the monomer units in the grafting chain using chlor...Ultraviolet （UV）-induced graft copolymerization of allyl acetate （AA） monomer onto poly（ethylene terephthalate） （PET） films and the subsequent sulfonation on the monomer units in the grafting chain using chlorosulfonic acid （C1SO3H） were carried out to prepare proton exchange membranes （PEMs） for fuel cells. A maximum grafting value of 12.8% was found for 35 vol% allyl acetate after 3 h radiation time. Optimum concentration of C1SO3H was selected for the sulfonation reaction to be 0.05 mol/L based on the degree of sulfonation and the tensile strength studies of the membrane. The degree of sulfonation increased as the sulfonation reaction temperature and sulfonation time were increasing. The radiation grafting and the sulfonation have been confirmed by titrimetric and gravimetric analyses as well as FTIR spectroscopy. The maximum ion exchange capacity （IEC） of 0.04125 mmol g-1 was found at 12.1% degree of sulfonation and the maximum proton conductivity was found to be 0.035 S cm-1 at 30℃ and a relative humidity of 60%. The various physical and chemical properties of the PEMs such as water uptake, mechanical strength, thermal durability and oxidative stability were also studied. To investigate the suitability of the prepared membrane for fuel cell applications, its properties were compared with those ofNafion 117.展开更多
文摘BACKGROUND An echocardiogram is an essential tool in the evaluation of potential kidney transplant recipients(KTRs).Despite cardiac clearance,potential KTRs still have structural and functional abnormalities.Identifying the prevalence of these abnormalities and understanding their predictors is vital for optimizing pretransplant risk stratification and improving post-transplant outcomes.AIM To determine the prevalence of left ventricular hypertrophy(LVH),left ventricular systolic dysfunction(LVSD),diastolic dysfunction(DD),pulmonary hypertension(PH),and their predictors,and to assess their impact on graft function in pre-transplant candidates.METHODS The study included all successful transplant candidates older than 14 who had a baseline echocardiogram.Binary logistic regression models were constructed to identify factors associated with LVH,LVSD,DD,and PH.RESULTS Out of 259 patients,LVH was present in 64%(166),12%(31)had LVSD,27.5%(71)had DD,and 66(25.5%)had PH.Independent predictors of LVH included male gender[odds ratio(OR):2.51;95%CI:1.17-5.41 P=0.02],PH(OR=2.07;95%CI:1.11-3.86;P=0.02),DD(OR:2.47;95%CI:1.29-4.73;P=0.006),and dyslipidemia(OR=1.94;95%CI:1.07-3.53;P=0.03).Predictors for LVSD included patients with DD(OR=3.3,95%CI:1.41-7.81;P=0.006)and a family history of coronary artery disease(OR=4.50,95%CI:1.33-15.20;P=0.015).Peritoneal dialysis was an independent predictor for DD(OR=10.03;95%CI:1.71-58.94,P=0.011).The presence of LVH(OR=3.32,95%CI:1.05-10.55,P=0.04)and mild to moderate or moderate to severe mitral regurgitation(OR=4.63,95%CI:1.45-14.78,P=0.01)were significant factors associated with PH.These abnormalities had no significant impact on estimated glomerular filtration at discharge,6 months,1 year,or 2 years post-transplant.CONCLUSION Significant echocardiographic abnormalities persist in a potential transplant candidate despite cardiac clearance,although they don’t affect future graft function.Understanding the risk factors associated with these abnormalities may help clinicians address these factors pre-and post-transplant to achieve better outcomes.
文摘BACKGROUND The use of induction immunosuppression agents has improved kidney transplant outcomes,but selecting the optimal agent remains a point of debate.AIM To compare the long-term outcomes of kidney transplant recipients receiving alemtuzumab vs basiliximab induction,focusing on graft function,acute rejection,infection,malignancy,post-transplant glomerulonephritis,and survival,using a propensity score matched cohort design.METHODS Kidney transplant recipients who received alemtuzumab or basiliximab induction from 2014 to 2019 across two nephrology centres in Northwest England were evaluated.Propensity score matching at a 1:1.5 ratio ensured comparability between cohorts.Baseline characteristics,immunosuppression regimens,and outcomes were analyzed.Linear,binary logistic and Cox proportional hazard regression models.RESULTS A total of 436 recipients were included,with a median follow-up of 5.2 years.The matched cohort(n=262)had a mean age of 51.1±13.5 years;39%were female and 92%were white.There was no significant difference in the cumulative incidence of acute rejection[odds ratio(OR)=2.10;95%CI:0.9-4.9;P=0.110].Compared with basiliximab,alemtuzumab was associated with lower estimated glomerular filtration rate at 12 months(-6.6 mL/minute/1.73 m2;95%CI:-10.5 to-2.7;P<0.001)and higher risks of cytomegalovirus viremia(OR=3.2;95%CI:1.6-6.5;P<0.001),BK viremia(OR=2.4;95%CI:1.1-5.5;P=0.02),post-transplant malignancy(OR=6.2;95%CI:1.6-29.9;P=0.013),and death-censored graft loss(hazard ratio=3.6;95%CI:1.2-11.4;P=0.03).No significant differences were observed in post-transplant glomerulonephritis or recipient mortality.CONCLUSION In this propensity score-matched analysis,alemtuzumab induction was associated with lower graft function at 12 months and higher risks of viral infection,post-transplant malignancy,and graft loss compared with basiliximab.These findings highlight the need for further studies to confirm the long-term safety and effectiveness of alemtuzumab in kidney transplantation.
文摘AIM:To investigate the effect of pentagonal conjunctival autograft on reducing graft retraction following pterygium surgery.METHODS:This retrospective comparative study included patients who underwent primary pterygium excision with either pentagonal(created by shaping the junction with the recipient conjunctiva into a wedge)or quadrangular conjunctival autograft transplantation.All patients completed a 6mo postoperative follow-up.The primary outcome measure was the incidence of graft retraction;secondary outcomes included graft displacement requiring re-suturing and pterygium recurrence rate.RESULTS:The study enrolled 58 participants,comprising 26(15 males,11 females)in the pentagonal graft group(mean age:54.9±13.1y),and 32(17 males,15 females)in the quadrangular graft group(mean age:57.6±10.4y).Graft retraction occurred in only 1 eye(3.8%)in the pentagonal autograft group,compared to 9 eyes(28.1%)in the quadrangular autograft group.No cases of graft displacement requiring re-suturing were reported in the pentagonal autograft group.Although graft displacement and recurrence requiring re-suturing were observed less frequently in surgeries with a pentagonal graft,the difference was not statistically significant(P>0.05).CONCLUSION:Designing the conjunctival autograft in a pentagonal shape—mimicking geodesic dome architecture and conforming to the eye’s spherical structure—enhances compatibility with the recipient conjunctiva and improves resistance to physical traction forces.This design effectively reduces the incidence of graft retraction and other related complications,providing a more favorable surgical option for pterygium treatment.
基金This work was supported by the National Natural Science Foundation of China(No.20274018)Nankai University for their partly financial.
文摘Grafting of poly(methyl methacrylate)from narrow disperse polymer particles by surface-initiated atom transferradical polymerization(ATRP)was investigated.Polydivinylbenzene(PDVB)particles were prepared by dispersionpolymerization with poly(N-vinyl pyrrolidone)(PVP)as the stabilizer.Chloromethylated PDVB was used as initiating coresites for subsequent ATRP of methyl methacrylate with CuBr/bpy as catalyst system.It was found that poly(methylmethacrylate)was grafted not only from the particle surfaces but also from within a thin shell layer,leading to particles sizeincreases from 2.38-3.00 μm with a core-shell structure particles.The grafted core-shell particles were characterized withFTIR,SEM,DSC.
基金Supported by the Scientific and Technological Development Programs of Beijing Municipal Education Commission, China (No.KM201010011004)the Scientific Research Foundation for the Returned Overseas Chinese Scholars, Ministry of Education, China, the 2011 Merit-based Research Funding for Picked Returned Overseas Scholars, Beijing Municipality, ChinaBeijing Technology and Business University Through a Research Project Approved for Undergraduates
文摘Photo-grafting of hydrophilic monomer was used to enhance the hydrophilicity of poly（ether ether ketone） （PEEK） with the aim of extending its applications to biological fields. PEEK sheets were surface modified by grafting of acrylamide（AAm） with ultraviolet（UV） irradiation in the presence or absence of benzophenone（BP）. The effects of BP, irradiation time and monomer concentration on the surface wettability of PEEK were investigated. Characteriza tion of modified PEEK using scanning electron microscopy（SEM）, energy-disperse spectrometer（EDS） and water contact angle measurements shows that AAm was successfully grafted on PEEK surface both in presence and absence of BP. With the increase in irradiation time and monomer concentration, contact angles decrease to as low as 30°, demonstrating a significant improvement of surface hydrophilicity. In agreement with the decrease in contact angle, under identical conditions, the nitrogen concentration increases, suggesting the increase in grafting degree of the grafting polymerization. This investigation demonstrates a self-initiation of PEEK due to its BP-like structure in the backbone of the polymer. Though the graft polymerization proceeds more readily in the presence of BP, the self-initiated graft polymerization is clearly observed.
基金The work was supported by the National Natural Science Foundation of China (Grant No. 20074033) and the High-TechResearch and Development Program of China (Grant no. 2002AA601230).
文摘Surface modification of microporous polypropylene hollow fiber membranes was performed by radical-induced graft polymerization of N,N-dimethylaminoethyl methacrylate (DMAEMA). The influences of temperature, monomer concentration and pre-adsorbed amount of benzoyl peroxide on grafting degree were studied respectively. It was found that the appropriate graft temperature was 75 'C, at which the grafting degree was the highest and the hydrolytic decomposition of DMAEMA the lowest. Scanning electron photomicrography and the average pore diameters of the modified membranes demonstrated that part of the micropores on the membrane surface was plugged by the grafted polyDMAEMA chains, especially at high grafting degree. Contact angle and water swelling experiments showed that a moderate grafting degree could improve the hydrophilicity of the membranes. In the range of 11.3%-12.0% grafting degree, the water swelling percentage reached its maximum (51.1%) and the contact angle reached its minimum (74 degrees). The bovine serum albumin (BSA) adsorption experiment indicated that the grafted polyDMAEMA had a dual effect on protein adsorption. At the first stage, the BSA adsorption decreased with increasing of DMAEMA grafting degree. As the interaction between BSA and polyDMAEMA on membrane surface increased, the BSA adsorption increased with increasing of DMAEMA grafting degree.
基金This work was financed by the National Natural Science Foundation of China(No. 20474054).
文摘Ultraviolet （UV）-induced graft polymerization of acrylamide （AAm） on polypropylene substrates was successfully conducted using dibenzyl trithiocarbonate （DBTTC） as photoinitiator. It was confirmed by chemical analysis and surface morphology observation with attenuated total reflectance Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy. A possible mechanism for this graft process was presented, which suggested that, under UV irradiation, the C： S bond in DBTTC could split and abstract a hydrogen from the polypropylene surface and a surface free radical was then formed, and initiated the graft polymerization of AAm.
基金Project supported by the Natural Science Foundation of Beijing(No.2051002)Science and Technology Programme of Beijing(No.D0205004040421)
文摘By dynamic method under UV irradiation, commercial melt-blown polypropylene （PPMB） filter element was modified with acrylamide （AAm） using benzophenone （BP） as initiator. Attenuated total reflection-Fourier transform infrared spectroscopy and scanning electron microscope verified that polyacrylamide chain was grafted on the fiber surface of PPMB filter element. Elemental content analysis with energy dispersive X-ray of fibers revealed that the polymerization content in the inner part of filter element was relatively higher than that in the outer. Degree of grafting changed with initiator concentration, monomer concentration, reaction temperature and reached 2.6% at the reaction condition： CBp=0.06 mol/L, CAAm=2.0 mol/L, irradiation time： 80 min, temperature： 60℃. Relative water flux altered with the hydrophilicity and pore size of filter element. In the antifouling test, the modified filter gave greater flux recovery （approximately 70%） after filtration of the water extract of Liuweidihuang, suggesting that the fouling layer was more easily reversible due to the hydrophilic nature of the modified filter.
基金Supported by the National Natural Science Foundation of China (21106162)the National Key Natural Science Foundation of China (21136009)+1 种基金the National High Technology Research and Development Program of China (2009CB219904)the State Key Laboratory of Chemical Engineering (SKL-ChE-11A04)
文摘Abstract A novel polyglycidylmethacrylate （PGMA） microspheres with high adsorption capacity of Cr（VI） was prepared by cerium（IV） initiated graft polymerization of tentacle-type polymer chains with amino group on polymer microspheres with hydroxyl groups. The micron-sized PGMA microspheres were prepared by a dispersion polym erization method and subsequently modified by ring-opening reaction to introduce functional hydroxyl groups. The polymer microspheres were characterized by scanning electron microscopy （SEM） and Fourier transform infrared spectroscopy （FTIR）. The results indicated that the polymer microspheres had an average diameter of 5 m with uniform size distribution. The free amino group content was determined to be 5.13 mmol·g^-1 for g;PGMA-NH2 microspheres by potentiometric and conductometric titration methods. The Cr（VI） adsorption results indicated that the graft polymerization of tentacle-type polymer chains on the polymer microspheres could produce adsorbents with high adsorption capacity （500 mg-g-l）. The polymer microspheres with grafted tentacle polymer chains have potenial application in large-scale removal of Cr（VI） in aqueous solution.
基金supported by the Fundamental Research Funds for the Central Universities 2232019A3-12National Natural Science Foundation of China(No.11375042)。
文摘Durable superomniphobic surfaces are desirable for their practical applications,including selfcleaning,non-fouling,protective clothing and the separation of liquids.The plasma-induced polymerization of environmentally friendly C6 from a perfluoralkyl methlacrylate copolymer emulsion,AG-E081,was performed and a durable omniphobic fabric was achieved.C6 is an ecological alternative to C8(eight CF2 groups)fluorinated compounds,and it was thereafter successfully incorporated into aramid fabric to achieve a durable superomniphobic surface.The fabric became water and oil repellent with an extremely high water contact angle of 180°.As tested by the water spray AATCC test and hydrocarbon resistance test,the as-prepared fabric gained 100°(ISO 5)and grade number 4 respectively.Furthermore,the fabrics also showed significantly improved washing durability after ten washing cycles.By scanning electron microscopy(SEM),Fourier-transform infrared spectroscopy(FTIR)and x-ray photoelectron spectroscopy(XPS)tests,it is indicated that the durable superomniphobicity can be attributed to the roughness and activation of the aramid surface by the plasma pre-treatment,which induces more adsorption and chemical graft of the C6 copolymer.
基金financially supported by the National Natural Science Foundation of China(No.50673073)the Doctoral Foundation of Ministry of Education of China(No.20060056043)
文摘The surface of polypropylene （iPP） is modified with glow discharge plasma of Ar, so that the modified surfaces of iPP films are obtained. The studies of scanning electron microscopy （SEM） show the surface etching pattern of iPP films. The chemical structures of iPP films are confirmed by X-ray photoelectron spectroscopy （XPS） and Fourier transform infrared （FTIR） spectroscopy. The wetting properties of modified surfaces of iPP films are characterized by contact angle, and the free energy of surfaces is calculated. The free radical of modification surfaces of iPP is measured by chemical method. The surfaces of iPP are achieved with Ar plasma treatment followed by grafting copolymerization with styrene （St） in St. The grafting polymer of St onto iPP is characterized by FTIR. The grafting rate is dependent on plasma exposure time and discharge voltage. The studies show that homopolymerization of St is undergone at the sane time during the graftingcopolymerization of St onto/PP.
基金Funded by the Program of Beijing Municipal Commission of Education
文摘Copolymerization of chitosan selectively grafted by polyethylene glycol was prepared. Chitosan was selectively grafted by monomethoxy polyethylene glycol（mPEG-OH）, which contained a hydroxyl group combining with hexamethylene diisocyanate（HDI） to form a novel macromonomer namely monomethoxy polyethylene glycol isocyanate（mPEG-NCO） containing a isocyanate group with higher chemical activity in ethyl glyoxalate solution absolutely without water. The selective grafted copolymerization of Chitosan with mPEG-NCO was conducted under heterogeneous conditions as suspension in dimethylformamide. The hydrophilic copolymers of chitosan were prepared by condensation reaction of isocyanate group on mPEG- NCO with hydroxy groups on chitosan chains because amino groups on chitosan chains were protected by complexion formation with copper ions. The effect of reaction condition on the grafting extents was discussed. Swelling properties of mPEG-g-CS were researched. The graft copolymer mPEG-g-CS was characterized by the infrared spectra. The experimental result showed that the copper ions were very effective to protect amino groups from condensation reaction. The swelling degree in water increases with adding of grafting ratio. The maximum swelling degree was up to above 132% when the grafting ratio was about 270%. The graft copolymer can be soluble partially in pure water.
基金National Natural Science Foundation of China (No. 20272062)
文摘Polyethylene (PE) grafting 4-vinylpyridine copolymers has been produced as powders of different rushes by theirradiation method. After treatment with methylaluminoxane (MAO), the copolymers were used as supports for Cp_2ZrCl_2catalyst Results of X-ray photoelectron spectroscopy, Fourier transforms infrared spectroscopy, ultraviolet spectroscopy andscanning electron microscope measurements show that the catalytic sites have been linked through MAO on the PE-graft-4-vinylpyridine (PEVP). The percentages of grafting 4-vinylpyridine and supported Cp_2ZrCl_2 depend on the size ofpolyethylene powder. The smaller the polyethylene powder, the more percent of 4-vinylpyridine groups and Cp_2ZrCl_2 existon the polyethylene chains, and the PEVP-supported catalyst has a relatively high activity for ethylene polymerization.
文摘In this paper, the capabilities of grafting acrylonitrile (AN) onto starch initiated by Fe(III)-TU, V(V)-TU, Cr(VI)-TU, Mn(VII)-TU redox systems were compared in the presence of sulfuric acid of different concentrations. It was shown that the grafting capability of Mn(VII)-TU is the highest in these initiating systems. Using Mn (VII-TU as initiator, the effects of various acids (HClO4, H2SO4, HNO3, HCl) on the graft copolymerization of acrylonitrile onto starch were discussed, and the capabilities of graft copolymerization of methyl methacrylate (MMA), acrylamide (AM), acrylic acid (AA) onto starch were investigated. The experimental results show that the order of the influences of different acids is HClO4 > H2SO4 > HNO3 > HCl, and the order of grafting capabilities of different monomers grafted onto starch is MMA > AN > AM > AA. The structure and morphology of graft, copolymers were studied with infrared spectroscopy and scanning electron microscopy. The size, shape and roughness of surface of the grafted starch granules are changed after grafting.
文摘The graft polymerization of acrylic acid(A) and acrylamide(B) was carried out onto bi-oriented polyester BOPET corona film.The influence of monomer concentration,reducer concentration and reaction time on the graft polymerization was investigated.The surface tension of the films increased with an increase of monomer concentration,till the concentration of monomer A reached 1.5×10^(-2)g/mL and the concentration of monomer B reached 4.0×10^(-2)g/mL.The surface tension of the films reached a maximum value at 7×10^(-4)M of reducer concentration and subsequently decreased with further increase in reducer concentration.The surface tension of the films increased with the increase of the reaction time apparently within 50min.The grafted corona BOPET films were characterized with IR and XPS.The presence of graft on the film surface was confirmed.The attenuation experiments on grafted corona BOPET films in air at 50℃ and in water were carried out to investigate the persistence of graft polymerization of acrylic acid and arylamide onto BOPET corona films.
文摘Herein, excellent UV-absorbing poly(vinylidene fluoride)(PVDF) membranes were fabricated through the pre-irradiation induced graft polymerization method. The PVDF chains irradiated with ^(60)Co γ-ray were modified with the polymerizable UV absorber 2-[2-hydroxy-5-[2-(methacryloyloxy)ethyl]phenyl]-2 H-benzotriazole(RUVA-93). The influences of irradiation dose and monomer concentration on the prepared PVDF-g-PRUVA-93 membranes were investigated, and the optimal condition was eventually obtained. The chemical structures of the films were studied by ~1H-NMR, FTIR, and XRD. UV light transmittance and DSC tests were used to characterize the UV-absorbing performance and thermal property of the PVDF films before and after modification. The results proved that the PRUVA-93 side chains were successfully incorporated into the PVDF main chains and the obtained PVDF-g-PRUVA-93 films possessed remarkable UV-absorbing property. The modified membrane made under the optimized experiment condition could completely block the UV light in the range of 200-387 nm. Additionally, the transmittance of the PVDF-g-PRUVA-93 film could be reduced to0.04% in 280-320 nm, where the light irradiation could damage polymer materials most seriously.
基金Funded by the Foundation for University Young Key Teacher by Zhejiang Province
文摘Membrane surfaces modified with poly（N-vinyl-2-pyrrolidone） （PNVP） can be endowed with hydrophilicity, biocompatibility and functionality. In this work, atmospheric pressure dielectric barrier discharge plasma graft polymerization of N-vinyl-2-pyrrolidone （NVP） onto polypropylene （PP） microporous membrane surface was studied. The experimental results reveal that plasma treatment conditions, such as discharge power, treatment time and adsorbed NVP amount, have remarkable effects on the grafting degree of NVP. Structural and morphological changes on the membrane surfaces were characterized by attenuated total reflection-Fourier transform infrared spectroscopy （FT-IR/ATR）, X-ray photoelectron spectroscope （XPS） and field emission scanning electron microscopy （FE-SEM）. Water contact angles of the membrane surfaces were also measured by the sessile drop method. Water contact angles on the membrane surfaces decrease with the increase of NVP grafting degree, which indicates an enhanced hydrophilicity for the modified membranes. The effects of grafting degrees on pure water fluxes were also measured. It is shown that pure water fluxes increase with grafting degree firstly and then decrease adversely. Finally, filtration of bovine serum albumin （BSA） solution and platelets adhesion of the PNVP modified membranes show good protein resistance and potential biocompatibility due to the enhancement of surface hydrophilicity.
文摘In homogeneous media, N,N-Dimethylacrylamide (DMA) was grafted copolymerization to cellulose by a metal-catalyzed atom transfer radical polymerization (ATRP) process. First, cellulose was dissolved in DMAc/LiCl system, and it reacted with 2-bromoisobutyloyl bromide (BiBBr) to produce macroinitiator (cell-BiB). Then DMA was polymerized to the cellulose backbone in a homogeneous DMSO solution in presence of the cell-BiB. Characterization with FT-IR, NMR, and GPC measurements showed that there obtained a graft copolymer with cellulose backbone and PDMA side chains (cell-PDMA) in well-defined structure. The proteins adsorption studies showed that the cellulose membranes modified by the as-prepared cell-PDMA copolymer owns good protein adsorption resistancet.
基金the National Natural Science Foundation of China (No.50673071).
文摘2,2,3,3,4,4,5,5-Octafluoropentyl acrylate was grafted onto silk fiber in a two-step heterogeneous system through the vinyl bonds of acryloyloxyethyl isocyanate modified on the silk.The grafted copolylner was analyzed by FTIR and WAXD,and the results revealed that the fluoroacrylate was successfully grafted onto silk fiber and the crystalline structure of silk fibroin withβ-sheet structure was not changed after graft copolymerization.The FT-IR corrected method was used to simulate the grafting yield onto sil...
文摘Ultraviolet （UV）-induced graft copolymerization of allyl acetate （AA） monomer onto poly（ethylene terephthalate） （PET） films and the subsequent sulfonation on the monomer units in the grafting chain using chlorosulfonic acid （C1SO3H） were carried out to prepare proton exchange membranes （PEMs） for fuel cells. A maximum grafting value of 12.8% was found for 35 vol% allyl acetate after 3 h radiation time. Optimum concentration of C1SO3H was selected for the sulfonation reaction to be 0.05 mol/L based on the degree of sulfonation and the tensile strength studies of the membrane. The degree of sulfonation increased as the sulfonation reaction temperature and sulfonation time were increasing. The radiation grafting and the sulfonation have been confirmed by titrimetric and gravimetric analyses as well as FTIR spectroscopy. The maximum ion exchange capacity （IEC） of 0.04125 mmol g-1 was found at 12.1% degree of sulfonation and the maximum proton conductivity was found to be 0.035 S cm-1 at 30℃ and a relative humidity of 60%. The various physical and chemical properties of the PEMs such as water uptake, mechanical strength, thermal durability and oxidative stability were also studied. To investigate the suitability of the prepared membrane for fuel cell applications, its properties were compared with those ofNafion 117.
