A hierarchical microporous-mesoporous metal-organic framework of HKUST-l（Cu）-encapsulated phosphotungstic acid （HPW） material, referred to as HPWs@Meso-HKUST-1, is prepared by a one-pot synthesis method using cety...A hierarchical microporous-mesoporous metal-organic framework of HKUST-l（Cu）-encapsulated phosphotungstic acid （HPW） material, referred to as HPWs@Meso-HKUST-1, is prepared by a one-pot synthesis method using cetyltrimethylammonium bromide as the supramolecular template. The addition of HPWs to the synthesis mixture of hierarchical porous HKUST-1 results in the direct encapsulation of HPWs inside the mesopores of the HKUST-1 structure, with a homogeneous distribution over the HKUST-1 crystals, which is confirmed by XRD, FT-IR, N2 adsorption, UV-Vis DRS, and TEM. FT-IR-CO adsorption experiments indicated that additional Lewis acid sites were present in the HPWs@Meso-HKUST-1 sample. The novel heterogeneous catalyst demonstrates excellent catalytic performance for the selective oxidation of cyclopentene （CPE） to glutaraldehyde CGA） using tert-butyl hydroperoxide and acetonitrile （MeCN） as the oxidant and solvent, respectively. The high activity of the catalyst is attributed to the mesostructure of the catalyst and the nature and appropriate abundance of the HPWs--being highly dispersed with the addition of Lewis sites. After a reaction for 36 h, the 30% wt% HPWs@Meso-HKUST-1 catalyst exhibits a CPE conversion of 92.5% and a high GA yield of 73%. Furthermore, the HPWs@Meso-HKUST-1 material is sufficiently stable to prevent the leaching of HPWs, and behaves as a true heterogeneous catalyst that can be repeatedly recycled without sustaining a loss of activity and selectivity in the selective oxidation of CPE.展开更多
Scots pine(Pinus sylvestris L.) panels were modified with glutaraldehyde(GA) to various weight percent gains and subsequently coated with several commercial coatings. The drying rate and adhesion of the coatings on th...Scots pine(Pinus sylvestris L.) panels were modified with glutaraldehyde(GA) to various weight percent gains and subsequently coated with several commercial coatings. The drying rate and adhesion of the coatings on the modified wood were measured; the coated/modified woods were exposed outdoors to analyze how the wood modifications influence the coating deterioration. The results showed that GA modification caused an increase in the drying rate of the waterborne coatings, but had no influence on drying of tested solvent-borne coatings. GAmodification did not change the dry adhesion but reduced the wood strength in a pull-off test. Wet adhesion of waterborne coatings was improved, while that of the solvent-borne coatings tended to be somewhat reduced. During 22 months of outdoor weathering, the coated/modified samples exhibited lower moisture content than the coated/unmodified samples, but GA modification didn't contribute a substantially synergistic effect with surface coatings on resistance to weathering.展开更多
A facile route for the large scale production of graphene oxide(GO) papers and their mechanical enhancement has been presented in this work. The novel paper-like GO made from individual GO sheets in aqueous suspension...A facile route for the large scale production of graphene oxide(GO) papers and their mechanical enhancement has been presented in this work. The novel paper-like GO made from individual GO sheets in aqueous suspension can be achieved in large scale by a simple drop casting method on hydrophobic substrates.Significant enhancement in mechanical stiffness(341%) and fracture strength(234%) of GO paper have been achieved upon modification with a small amount(less than 10 wt%) of glutaraldehyde(GA). The cross-linking reaction takes place between hydroxyl groups on the surface of GO and aldehyde groups of GA, through forming hemiacetal structure, which can result in distinct mechanical enhancement of the GO papers.展开更多
The glutaraldehyde cross-linked chitosan beads were prepared under microwave irradiation and urease was immobilized onto the beads. The activity and the yield of enzyme activity of the immobilized urease were 10.83 U/...The glutaraldehyde cross-linked chitosan beads were prepared under microwave irradiation and urease was immobilized onto the beads. The activity and the yield of enzyme activity of the immobilized urease were 10.83 U/g carrier and 47.700, respectively. The optimum conditions of immobilization were 100 of glutaraldehyde volume fraction, 10 mg/g of urease/beads weight ratio, 24 h of the processing time and pH 6.5 of the reaction medium for immobilization. The properties of the immobilized urease were investigated and compared with those of the free enzyme. The optimum pH values were 6.5 and 7.0 for the immobilized and free urease, respectively. The optimum temperature was 60 ℃ for the free urease, while it shifted to 65 ℃ for the immobilized enzyme. The Michaelis constant Km was 9.1 mmol/L for the immobilized and 12.5 mmol/L for the free urease. The immobilized urease retained 4000 of its initial enzyme activity even after 10 repeated uses. The immobilized urease stored at 4 ℃ retained 4600 of its initial activity even after 35 d.展开更多
Tungsten-containing hexagonal mesoporous silica （W-HMS） supported tungsten oxide catalysts （WOx/W-HMS） was prepared for the selective oxidation of cyclopentene with aqueous hydrogen peroxide to glutaraldehyde. X-r...Tungsten-containing hexagonal mesoporous silica （W-HMS） supported tungsten oxide catalysts （WOx/W-HMS） was prepared for the selective oxidation of cyclopentene with aqueous hydrogen peroxide to glutaraldehyde. X-ray diffraction （XRD） results indicated that the crystal form of the active phase （tungsten oxide） of the WOx/W-HMS catalysts was dependent on the W loading and calcination temperature. X-ray photoelectron spec- troscopy （XPS） analysis revealed that the dispersed tungsten oxides on the surface of W-HMS support consisted of a mixture of W（V） and W（VI）. It was found that a high content of amorphous W species in （5＋） oxidation state resuited in the high catalytic activity. When the W loading was up to 12% （by mass） or the catalyst precursor was treated at temperature of 623 K, the catalytic activity decreased due to the presence of WO3 crystallites and the oxidation of W（V） to W（VI） on the catalyst surface. Furthermore, NH3-temperature-programmed-desorption （NH3-TPD） analysis showed that the effects of W loading and calcination temperature on the acidity of the catalysts were related to the catalytic activity. A high selectivity of 80.2% for glutaraldehyde with a complete conversion of cyclopentene was obtained over 8%WOx/W-HMS catalyst calcined at 573 K after 14 h of reaction.展开更多
Microscale zero-valent iron(mZVI)has shown great potential for groundwater Cr(Ⅵ)remediation.However,low Cr(Ⅵ)removal capacity caused by passivation restricted the wide use of mZVI.We prepared mZVI/GCS by encapsulati...Microscale zero-valent iron(mZVI)has shown great potential for groundwater Cr(Ⅵ)remediation.However,low Cr(Ⅵ)removal capacity caused by passivation restricted the wide use of mZVI.We prepared mZVI/GCS by encapsulating mZVI in a porous glutaraldehydecrosslinked chitosan matrix,and the formation of the passivation layer was alleviated by reducing the contact between zero-valent iron particles.The average pore diameter of mZVI/GCS was 8.775 nm,which confirmed the mesoporous characteristic of this material.Results of batch experiments demonstrated that mZVI/GCS exhibited high Cr(Ⅵ)removal efficiency in a wide range of pH(2-10)and temperature(5-35℃).Common groundwater coexisting ions slightly affected m ZVI/GCS.The material showed great reusability,and the average Cr(Ⅵ)removal efficiency was 90.41%during eight cycles.In this study,we also conducted kinetics and isotherms analysis.Pseudo-second-order model was the most matched kinetics model.The Cr(Ⅵ)adsorption process was fitted by both Langmuir and Freundlich isotherms models,and the maximum Langmuir adsorption capacity of m ZVI/GCS reached243.63 mg/g,which is higher than the adsorption capacities of materials reported in most of the previous studies.Notably,the column capacity for Cr(Ⅵ)removal of a mZVI/GCS-packed column was 6.4 times higher than that of a mZVI-packed column in a 50-day experiment.Therefore,mZVI/GCS with a porous structure effectively relieved passivation problems of mZVI and showed practical application prospects as groundwater Cr(Ⅵ)remediation material with practical application prospects.展开更多
The preparation and adsorption of thiourea modified glutaraldehyde-crosslinked chitosan resin （Thio-chitosan） using cyanuric chloride as activator was studied. The adsorptive capacity of thio-chitosan with 15% appar...The preparation and adsorption of thiourea modified glutaraldehyde-crosslinked chitosan resin （Thio-chitosan） using cyanuric chloride as activator was studied. The adsorptive capacity of thio-chitosan with 15% apparent degree of crosslinking （DC, mass ration of glutaraldehyde to chitosan） to Cu（Ⅱ） was 160mg/g （dry weight）. The adsorption of Cu（Ⅱ） was correlated with Freundlich and Langmuir isotherm equation. Cu（Ⅱ） adsorbed on thio-chitosan column （ 1cm×10cm） was eluted with 0.5mol/L H2SO4, 6mol/L HCI and 3% thiourea solution with the recovery of 88.3%, 86.1% and 95.3%, respectively. The thio-chitosan resin can be applied to the separation and recovery of metal ions.展开更多
The spectral properties of the glutaraldehyde-treated phycobilisomes were studied. The results showed that glutaraldehyde was effective in preventing phycobilisomes from dilution- induced dissociation and preserving ...The spectral properties of the glutaraldehyde-treated phycobilisomes were studied. The results showed that glutaraldehyde was effective in preventing phycobilisomes from dilution- induced dissociation and preserving the intra-phycobilisomes energy transfer.展开更多
Colloidal suspensions of glutaraldehyde （GA） crosslinked or grafted graphene oxide （GO） sheets were fabricated by simply tailoring the feed sequence. The different structures were confirmed by Fourier transform in...Colloidal suspensions of glutaraldehyde （GA） crosslinked or grafted graphene oxide （GO） sheets were fabricated by simply tailoring the feed sequence. The different structures were confirmed by Fourier transform infrared spectra and X-ray diffraction. As demonstration of the utilities, the different colloidal suspensions were used to prepare free-standing papers by flow-directed filtration and poly（vinyl alcohol） （PVA）-based nanocomposite films by casting. Free-standing papers from GA crosslinked GO sheets exhibited better mechanical properties than unmodified GO paper, while nanocomposite films from GA grafted GO exhibit higher tensile strength and Young＇s modulus.展开更多
To evaluate the effect of local surgical adhesive glue (albumin/glutaraldehyde-Bioglue) on the healing of colonic anastomoses in rats. METHODSForty Albino-Wistar male rats were randomly divided into two groups, with t...To evaluate the effect of local surgical adhesive glue (albumin/glutaraldehyde-Bioglue) on the healing of colonic anastomoses in rats. METHODSForty Albino-Wistar male rats were randomly divided into two groups, with two subgroups of ten animals each. In the control group, an end-to-end colonic anastomosis was performed after segmental resection. In the Bioglue group, the anastomosis was protected with extraluminar application of adhesive glue containing albumin and glutaraldehyde. Half of the rats were sacrificed on the fourth and the rest on the eighth postoperative day. Anastomoses were resected and macroscopically examined. Bursting pressures were calculated and histological features were graded. Other parameters of healing, such as hydroxyproline and collagenase concentrations, were evaluated. The experimental data were summarized and computed from the results of a one-way ANOVA. Fisher’s exact test was applied to compare percentages. RESULTSBursting pressures, adhesion formation, inflammatory cell infiltration, and collagen deposition were significantly higher on the fourth postoperative day in the albumin/glutaraldehyde group than in the control group. Furthermore, albumin/glutaraldehyde significantly increased adhesion formation, inflammatory cell infiltration, neoangiogenesis, and collagen deposition on the eighth postoperative day. There was no difference in fibroblast activity or hydroxyproline and collagenase concentrations. CONCLUSIONAlbumin/glutaraldehyde, when applied on colonic anastomoses, promotes their healing in rats. Therefore, the application of protective local agents in colonic anastomoses leads to better outcomes.展开更多
Background: Suture-less circumcision by Feracrylate glue creates a weak and non waterproob bond. Hence, there is wound dehiscence and delayed healing which favor infection in many patients. I am describing a new techn...Background: Suture-less circumcision by Feracrylate glue creates a weak and non waterproob bond. Hence, there is wound dehiscence and delayed healing which favor infection in many patients. I am describing a new technique for suture-less circumcision which is free from above limitations. Methods: In my center in the time span of 2 years, I did 51 cases of circumcision with Laser tissue welding technique (group A). Age range was 5 months to 21 years. During the same time span, in 56 patients circumcision was done by Feracrylate glue (group B). The age range was 3 months to 22 years. This group was kept as a control. Patients in both groups were randomly distributed. The technique of circumcision by Laser tissue welding is as follows. Patient is under short GA, the prepuce above the artery forceps is chopped off by scissors and bleeders are coagulated by bipolar cautery. Now, 0.9 ml 40% human albumin is taken in 1 ml syringe and mixed with 0.1 ml of 10% glutaraldehyde solution. The syringe is shaken vigorously to mix both the components. The skin and mucosa of penis are held by tooth forceps and a thin layer of this mixture is layered over it all around. Infrared Laser of 5 watts power and 850 nm illuminated over this bond for 60 seconds to polymerize it. Results: In group A, 2 (3.9%) patients developed partial wound gape, no patient had complete wound gape. 3 (5.88%) patients had grade 2 infections which settled with conservative treatment of oral antibiotics. In group B, 6 (10.71%) patients had partial wound gape and 8 (14.28%) patients had complete wound gapping. 11 (19.64%) patients developed grade 2 and 8 (14.28%) patients grade 3 wound infection. All these 19 patients’ post-operative antibiotics were started and given for 7 - 10 days. The Glutaraldehyde albumin mixture bond is already described in medical literature (Bioglue) for its use to seal coronary anastomosis after CABG operation, to seal sutures of cardiac surgery and for aortic dissection, etc. It is a surgical adhesive composed of purified bovine serum albumin (BSA) and glutaraldehyde and is already American FDA approved. It creates a flexible mechanical seal independently of the body’s clotting mechanism. In my technique, 0.9 ml of 40% human albumin is mixed with 0.1 ml 10% glutaraldehyde solution which costs only 50 cents which is a massive 1000 times cost reduction. Laser application polymerizes the glue and forms a waterproob bond in less than a minute. In my technique, percentage of glutaraldehyde used is only 10% compared to 50% in bioglue, hence it is non-toxic to the tissues. Conclusion: Suture-less circumcision by glutaraldehyde albumin glue enhanced Laser tissue welding is a safe, cheap and effective technique of performing circumcision. It is an important advance in circumcision surgery after a long time. The technique becomes a foundation for its vast application in other areas of surgery.展开更多
A crosslinked chitosan film with α-tocopherol was produced by a solution casting method. The appearance, mechanical properties, morphology, barrier properties and release kinetics of the α-tocopherol were evaluated....A crosslinked chitosan film with α-tocopherol was produced by a solution casting method. The appearance, mechanical properties, morphology, barrier properties and release kinetics of the α-tocopherol were evaluated. The addition of glutaraldehyde and α-tocopherol decreased the lightness and greenness and increased the yellowness of the chitosan-based film. Moreover, it also affected the compatibility of the film due to a decrease in the opacity values. The elongation at break(EB) and tensile strength(TS) values of the film decreased when the glutaraldehyde and α-tocopherol were added. In contrast, the Young’s modulus(YM) values increased. SEM micrographs showed coarse spots and pores on the surface and cross-section of the film when compared with the chitosan film. Based on the results, it was indicated that the chitosan structure was disconnected by the α-tocopherol, and the glutaraldehyde as a crosslinking agent generated a link between the chitosan network, which could be the cause of the reduced flexibility and the increased surface roughness of the film. However, the glutaraldehyde and α-tocopherol did not result in a significant difference in water vapour permeability(WVP) values. The glutaraldehyde influenced the release kinetics of the α-tocopherol as seen by the decrease of the diffusion coefficient values that were calculated using the Fickian diffusion model.展开更多
The immobilizing procedure has great influence on the activity of the immobilized laccase. The laccase was immobilized on copper tetraaminophthalocyanine (CuTAPc)-Fe3O4 magnetic nano-composite by glutaraldehyde crossl...The immobilizing procedure has great influence on the activity of the immobilized laccase. The laccase was immobilized on copper tetraaminophthalocyanine (CuTAPc)-Fe3O4 magnetic nano-composite by glutaraldehyde crosslinking method via a two-step reaction. For 1 g nano-composite, the optimum pH value, the quantity, the concentration and reaction time of glutaraldehyde are 7.0, 10 mL, 10% and 4 h, respectively. In the second step the optimum pH value, reaction temperature and reaction time of laccase are 5.0, 0 ℃ and 2 h, respectively. The average diameter of the immobilized laccase is 78 nm, the saturation magnetization (Ms) of the immobilize laccase is 23.45 A·m2/kg and the surface area of the immobilized laccase is 115.03 m2/g. When 2.0 mg/mL laccase solution is used under optimum conditions and 2, 2′-azino-bis-(3-ethylbenzothiazoling-6-sulphonic acid) is used as substrate, the activity of immobilized laccase reaches 1 430 U/g (nano-composite) and the Michealis-Menten constant(Km) of the immobilized laccase is 2.38×10?5 mol/L.展开更多
This study compares the crude oil removal efficiency of free and biosurfactant-producing bacterial consortia(Bacillus tequilensis NR_104919 and Bacillus axarquiensis NR_115929)entrapped in chitosan(CH),chitosan/glutar...This study compares the crude oil removal efficiency of free and biosurfactant-producing bacterial consortia(Bacillus tequilensis NR_104919 and Bacillus axarquiensis NR_115929)entrapped in chitosan(CH),chitosan/glutaraldehyde(CH/GA),and chitosan/Na-bentonite(CH/BNT)matrices.Additionally,the mechanical and thermal stability,swelling capacity,surface morphology,and chemical bonding of these composites were evaluated.Initially,the biosurfactant produced by the consortium was identified using screening methods,and its lipopeptide structure was confirmed through TLC and 1H NMR analyses,with a yield of 0.2 g/L.Following characterization,the biosurfactant-producing bacterial consortium was immobilized onto CH,CH/GA,and CH/BNT beads for further assessment.When comparing the oil removal capacities of the composites,the consortium immobilized in the CH/BNT matrix exhibited significantly higher crude oil removal efficiency than those entrapped in CH,CH/GA,and the free consortium.The maximum oil removal by the CH/BNT-entrapped consortium was achieved under optimized conditions:0.5 mL crude oil,0.1 g Na-bentonite,pH=6.0,at 35℃,over a 7-day incubation period.However,a decline in oil remediation performance was observed from the fourth reuse cycle onward.These laboratory-scale findings were further validated through ex-situ simulation and long-term experiments,confirming the potential of the CH/BNT composite for effective and sustainable petroleum pollutant remediation.The swelling capacity of inactivated CH was comparable to that of the CH/BNT composite,with both exhibiting greater swelling than CH/GA beads.Additionally,CH/BNT beads demonstrated superior mechanical stability relative to CH and CH/GA,which showed similar stability profiles.Thermal stability,surface morphology,and chemical bonding of the CH,CH/GA,and CH/BNT composites were characterized using TGA,FT-IR,and SEM analyses.CH/BNT composite represents an effective,economical,and environmentally benign alternative to costly synthetic materials for the remediation of oil pollution in aquatic environments.This study highlights the potential of chitosan/Na-bentonite-based composites as sustainable solutions for petroleum pollutant removal,while recommending pilot-scale investigations to assess their feasibility and performance under real-world conditions.展开更多
Hydrogen sulfide emission in sewer systems is associated with toxicity, corrosion, odour nuisance and high costs treatment. In this study, a novel method to inhibit sulfide generation from sewage by means of glutarald...Hydrogen sulfide emission in sewer systems is associated with toxicity, corrosion, odour nuisance and high costs treatment. In this study, a novel method to inhibit sulfide generation from sewage by means of glutaraldehyde supplementation has been suggested and evaluated under anaerobic conditions. Different concentra- tions of glutaraldehyde at 10, 15, 20, 30 and 40mg.L1 have been investigated. Besides, the possible impacts of glutaraldehyde supplementation on an activated sludge system and an appraisal of the economic aspects are presented as well. As observed from the experimental results, a dosage of 20 mg. L-1 glutaraldehyde resulted in a significant decrease of the sulfide production by 70%-80% in the simulated sewage. Moreover, the impacts of additional glutaraldehyde at 20mg·L^-1 on activated sludge, in terms of chemical oxygen demand removal and oxygen uptake rates, were negligible. From an economical point of view, the cost of the commercial glutaraldehyde products required in the operation, which was calculated on the basis of activated sulfide removal avoidance, was around ε3.7-4.6 S·kg^-1. Therefore it is suggested that glutaraldehyde supplementation is a feasible technique to abate the sulfide problems in sewer systems. Yet further research is required to elucidate the optimum ＂booster＂ dosage and the dosing frequency in situ accordingly.展开更多
Glutaraldehyde(GA)is an important additive that is mainly used in animal-derived biomaterials to improve their mechanical and antimicrobial capacities.However,GA chemical toxicity and the metabolic mechanism remain re...Glutaraldehyde(GA)is an important additive that is mainly used in animal-derived biomaterials to improve their mechanical and antimicrobial capacities.However,GA chemical toxicity and the metabolic mechanism remain relatively unknown.Therefore,residual GA has always been a major health risk consideration for animal-derived medical devices.In this study,extracts of three biopatches were tested via the GA determination test and mouse lymphoma assay(MLA).The results showed that dissolved GA was a potential mutagen,which could induce significant cytotoxic and mutagenic effects in mouse lymphoma cells.These toxic reactions were relieved by the S9 metabolic activation(MA)system.Furthermore,we confirmed that GA concentration decreased and glutaric acid was generated during the catalytic process.We revealed GA could be oxidized via cytochrome P450 which was the main metabolic factor of S9.We found that even though GA was possibly responsible for positive reactions of animal-derived biomaterials’biocompatibility evaluation,it may not represent the real situation occurring in human bodies,owing to the presence of various detoxification mechanisms including the S9 system.Overall,in order to achieve a general balance between risk management and practical application,rational decisions based on comprehensive analyses must be considered.展开更多
In this study,cellulose nanofibers(CNFs)were crossed-linked with glutaraldehyde(GA)under acid condition for tailoring the mechanical properties and water-resistance of nanopaper or films.The impact of carboxyl content...In this study,cellulose nanofibers(CNFs)were crossed-linked with glutaraldehyde(GA)under acid condition for tailoring the mechanical properties and water-resistance of nanopaper or films.The impact of carboxyl content of CNFs,GA concentration,temperature,pH,and reaction time on the crosslinking was investigated,and the process conditions for the crosslinking were optimized.FT-IR analyses showed that CNFs/GA cross-linked nanopaper was successfully fabricated by acetalization between the-OH groups of CNFs and the-CHO groups of GA,resulting in the formation of a dense,three-dimensional network.The elastic modulus of CNFs/GA cross-linked film was 7.66GPa,62.98%higher than that of CNFs film.The water-resistance of the cross-linked CNFs/GA films was improved.The crossed-linked CNFs/GA films was still intact after 24 h after being immersed in water,while the CNFs films almost dissolved completely after 20 min of soaking in water.This method provides a facile route to enhance the elastic modulus and water-resistance of CNFs for potential applications including bullet-proof glass interlayer,flexible electronic device,and new packing materials.展开更多
We established a f uorescence“turn-on”sensing platform for glutathione(GSH)detection utilizing chitosan-based glutaraldehyde non-conjugated polymers(GCPF)as nanomaterials via f uorescence resonance energy transfer(F...We established a f uorescence“turn-on”sensing platform for glutathione(GSH)detection utilizing chitosan-based glutaraldehyde non-conjugated polymers(GCPF)as nanomaterials via f uorescence resonance energy transfer(FRET)principle.Owing to the overlapping property of absorption spectrum of MnO^(2)nanosheets with f uorescence spectrum of GCPF,f uorescent intensity of GCPF was quenched in the presence of MnO^(2)nanosheets because of FRET principle.When GSH was added,MnO^(2)nanosheets were reduced and decomposed into large amounts of Mn^(2+)ions owing to reducing property of GSH.Accordingly,the quenched f uorescent intensity was turned on again.Therefore,this platform based on MnO^(2)nanosheet has been f rst applied to f uorescence“turn-on”detection of GSH from 0.5 to 50μmol/L with sdetection limit of 84 nmol/L.It showed high selectivity in GSH detection towards other ions and biomolecules such as L-lysine,L-threonine,L-valine,L-glutamic acid and DL-aspartic acid.When it was utilized in detecting GSH in serum samples,satisfactory recoveries ranged from 101.5%to 103.2%,indicating the accuracy of this f uorescence“turn-on”platform in bioanalysis.展开更多
基金supported by the Plan of Nature Science Fundamental Research in Henan University of Technology (2013JCYJ09)the Fundamental Research Funds for the Henan Provincial Colleges and Universities(2014YWQQ13)the National Natural Science Foundation of China (20903035,21373054)~~
文摘A hierarchical microporous-mesoporous metal-organic framework of HKUST-l（Cu）-encapsulated phosphotungstic acid （HPW） material, referred to as HPWs@Meso-HKUST-1, is prepared by a one-pot synthesis method using cetyltrimethylammonium bromide as the supramolecular template. The addition of HPWs to the synthesis mixture of hierarchical porous HKUST-1 results in the direct encapsulation of HPWs inside the mesopores of the HKUST-1 structure, with a homogeneous distribution over the HKUST-1 crystals, which is confirmed by XRD, FT-IR, N2 adsorption, UV-Vis DRS, and TEM. FT-IR-CO adsorption experiments indicated that additional Lewis acid sites were present in the HPWs@Meso-HKUST-1 sample. The novel heterogeneous catalyst demonstrates excellent catalytic performance for the selective oxidation of cyclopentene （CPE） to glutaraldehyde CGA） using tert-butyl hydroperoxide and acetonitrile （MeCN） as the oxidant and solvent, respectively. The high activity of the catalyst is attributed to the mesostructure of the catalyst and the nature and appropriate abundance of the HPWs--being highly dispersed with the addition of Lewis sites. After a reaction for 36 h, the 30% wt% HPWs@Meso-HKUST-1 catalyst exhibits a CPE conversion of 92.5% and a high GA yield of 73%. Furthermore, the HPWs@Meso-HKUST-1 material is sufficiently stable to prevent the leaching of HPWs, and behaves as a true heterogeneous catalyst that can be repeatedly recycled without sustaining a loss of activity and selectivity in the selective oxidation of CPE.
基金supported by the National Natural Science Foundation of China(31500469 and 31470585)the Natural Science Foundation of Heilongjiang Province,China(JC2015006)
文摘Scots pine(Pinus sylvestris L.) panels were modified with glutaraldehyde(GA) to various weight percent gains and subsequently coated with several commercial coatings. The drying rate and adhesion of the coatings on the modified wood were measured; the coated/modified woods were exposed outdoors to analyze how the wood modifications influence the coating deterioration. The results showed that GA modification caused an increase in the drying rate of the waterborne coatings, but had no influence on drying of tested solvent-borne coatings. GAmodification did not change the dry adhesion but reduced the wood strength in a pull-off test. Wet adhesion of waterborne coatings was improved, while that of the solvent-borne coatings tended to be somewhat reduced. During 22 months of outdoor weathering, the coated/modified samples exhibited lower moisture content than the coated/unmodified samples, but GA modification didn't contribute a substantially synergistic effect with surface coatings on resistance to weathering.
基金financial supports by the National Natural Science Foundation of China (No. 51102164 and 50902092)Science and Technology Commission of Shanghai Municipality (No. 1052nm06800 and 1052nm02000)+1 种基金Shanghai Pujiang Program (No. 11PJD011)the Program for Professor of Special Appointment (Eastern Scholar) at Shanghai Institutions of Higher Learning
文摘A facile route for the large scale production of graphene oxide(GO) papers and their mechanical enhancement has been presented in this work. The novel paper-like GO made from individual GO sheets in aqueous suspension can be achieved in large scale by a simple drop casting method on hydrophobic substrates.Significant enhancement in mechanical stiffness(341%) and fracture strength(234%) of GO paper have been achieved upon modification with a small amount(less than 10 wt%) of glutaraldehyde(GA). The cross-linking reaction takes place between hydroxyl groups on the surface of GO and aldehyde groups of GA, through forming hemiacetal structure, which can result in distinct mechanical enhancement of the GO papers.
文摘The glutaraldehyde cross-linked chitosan beads were prepared under microwave irradiation and urease was immobilized onto the beads. The activity and the yield of enzyme activity of the immobilized urease were 10.83 U/g carrier and 47.700, respectively. The optimum conditions of immobilization were 100 of glutaraldehyde volume fraction, 10 mg/g of urease/beads weight ratio, 24 h of the processing time and pH 6.5 of the reaction medium for immobilization. The properties of the immobilized urease were investigated and compared with those of the free enzyme. The optimum pH values were 6.5 and 7.0 for the immobilized and free urease, respectively. The optimum temperature was 60 ℃ for the free urease, while it shifted to 65 ℃ for the immobilized enzyme. The Michaelis constant Km was 9.1 mmol/L for the immobilized and 12.5 mmol/L for the free urease. The immobilized urease retained 4000 of its initial enzyme activity even after 10 repeated uses. The immobilized urease stored at 4 ℃ retained 4600 of its initial activity even after 35 d.
文摘Tungsten-containing hexagonal mesoporous silica （W-HMS） supported tungsten oxide catalysts （WOx/W-HMS） was prepared for the selective oxidation of cyclopentene with aqueous hydrogen peroxide to glutaraldehyde. X-ray diffraction （XRD） results indicated that the crystal form of the active phase （tungsten oxide） of the WOx/W-HMS catalysts was dependent on the W loading and calcination temperature. X-ray photoelectron spec- troscopy （XPS） analysis revealed that the dispersed tungsten oxides on the surface of W-HMS support consisted of a mixture of W（V） and W（VI）. It was found that a high content of amorphous W species in （5＋） oxidation state resuited in the high catalytic activity. When the W loading was up to 12% （by mass） or the catalyst precursor was treated at temperature of 623 K, the catalytic activity decreased due to the presence of WO3 crystallites and the oxidation of W（V） to W（VI） on the catalyst surface. Furthermore, NH3-temperature-programmed-desorption （NH3-TPD） analysis showed that the effects of W loading and calcination temperature on the acidity of the catalysts were related to the catalytic activity. A high selectivity of 80.2% for glutaraldehyde with a complete conversion of cyclopentene was obtained over 8%WOx/W-HMS catalyst calcined at 573 K after 14 h of reaction.
基金supported by the National Key Research and Development Project(Nos.2019YFC1806203,2020YFC1808300,2021YFC1809200)the National Natural Science Foundation of China(No.41977162)。
文摘Microscale zero-valent iron(mZVI)has shown great potential for groundwater Cr(Ⅵ)remediation.However,low Cr(Ⅵ)removal capacity caused by passivation restricted the wide use of mZVI.We prepared mZVI/GCS by encapsulating mZVI in a porous glutaraldehydecrosslinked chitosan matrix,and the formation of the passivation layer was alleviated by reducing the contact between zero-valent iron particles.The average pore diameter of mZVI/GCS was 8.775 nm,which confirmed the mesoporous characteristic of this material.Results of batch experiments demonstrated that mZVI/GCS exhibited high Cr(Ⅵ)removal efficiency in a wide range of pH(2-10)and temperature(5-35℃).Common groundwater coexisting ions slightly affected m ZVI/GCS.The material showed great reusability,and the average Cr(Ⅵ)removal efficiency was 90.41%during eight cycles.In this study,we also conducted kinetics and isotherms analysis.Pseudo-second-order model was the most matched kinetics model.The Cr(Ⅵ)adsorption process was fitted by both Langmuir and Freundlich isotherms models,and the maximum Langmuir adsorption capacity of m ZVI/GCS reached243.63 mg/g,which is higher than the adsorption capacities of materials reported in most of the previous studies.Notably,the column capacity for Cr(Ⅵ)removal of a mZVI/GCS-packed column was 6.4 times higher than that of a mZVI-packed column in a 50-day experiment.Therefore,mZVI/GCS with a porous structure effectively relieved passivation problems of mZVI and showed practical application prospects as groundwater Cr(Ⅵ)remediation material with practical application prospects.
基金Project Supported by： The Natural Science Foundation of Anhui Educational Committee （No. 2004kj066）
文摘The preparation and adsorption of thiourea modified glutaraldehyde-crosslinked chitosan resin （Thio-chitosan） using cyanuric chloride as activator was studied. The adsorptive capacity of thio-chitosan with 15% apparent degree of crosslinking （DC, mass ration of glutaraldehyde to chitosan） to Cu（Ⅱ） was 160mg/g （dry weight）. The adsorption of Cu（Ⅱ） was correlated with Freundlich and Langmuir isotherm equation. Cu（Ⅱ） adsorbed on thio-chitosan column （ 1cm×10cm） was eluted with 0.5mol/L H2SO4, 6mol/L HCI and 3% thiourea solution with the recovery of 88.3%, 86.1% and 95.3%, respectively. The thio-chitosan resin can be applied to the separation and recovery of metal ions.
文摘The spectral properties of the glutaraldehyde-treated phycobilisomes were studied. The results showed that glutaraldehyde was effective in preventing phycobilisomes from dilution- induced dissociation and preserving the intra-phycobilisomes energy transfer.
基金financially supported by the National Natural Science Foundation of China (No.51073136)the Zhejiang Innovation Program for Graduates
文摘Colloidal suspensions of glutaraldehyde （GA） crosslinked or grafted graphene oxide （GO） sheets were fabricated by simply tailoring the feed sequence. The different structures were confirmed by Fourier transform infrared spectra and X-ray diffraction. As demonstration of the utilities, the different colloidal suspensions were used to prepare free-standing papers by flow-directed filtration and poly（vinyl alcohol） （PVA）-based nanocomposite films by casting. Free-standing papers from GA crosslinked GO sheets exhibited better mechanical properties than unmodified GO paper, while nanocomposite films from GA grafted GO exhibit higher tensile strength and Young＇s modulus.
文摘To evaluate the effect of local surgical adhesive glue (albumin/glutaraldehyde-Bioglue) on the healing of colonic anastomoses in rats. METHODSForty Albino-Wistar male rats were randomly divided into two groups, with two subgroups of ten animals each. In the control group, an end-to-end colonic anastomosis was performed after segmental resection. In the Bioglue group, the anastomosis was protected with extraluminar application of adhesive glue containing albumin and glutaraldehyde. Half of the rats were sacrificed on the fourth and the rest on the eighth postoperative day. Anastomoses were resected and macroscopically examined. Bursting pressures were calculated and histological features were graded. Other parameters of healing, such as hydroxyproline and collagenase concentrations, were evaluated. The experimental data were summarized and computed from the results of a one-way ANOVA. Fisher’s exact test was applied to compare percentages. RESULTSBursting pressures, adhesion formation, inflammatory cell infiltration, and collagen deposition were significantly higher on the fourth postoperative day in the albumin/glutaraldehyde group than in the control group. Furthermore, albumin/glutaraldehyde significantly increased adhesion formation, inflammatory cell infiltration, neoangiogenesis, and collagen deposition on the eighth postoperative day. There was no difference in fibroblast activity or hydroxyproline and collagenase concentrations. CONCLUSIONAlbumin/glutaraldehyde, when applied on colonic anastomoses, promotes their healing in rats. Therefore, the application of protective local agents in colonic anastomoses leads to better outcomes.
文摘Background: Suture-less circumcision by Feracrylate glue creates a weak and non waterproob bond. Hence, there is wound dehiscence and delayed healing which favor infection in many patients. I am describing a new technique for suture-less circumcision which is free from above limitations. Methods: In my center in the time span of 2 years, I did 51 cases of circumcision with Laser tissue welding technique (group A). Age range was 5 months to 21 years. During the same time span, in 56 patients circumcision was done by Feracrylate glue (group B). The age range was 3 months to 22 years. This group was kept as a control. Patients in both groups were randomly distributed. The technique of circumcision by Laser tissue welding is as follows. Patient is under short GA, the prepuce above the artery forceps is chopped off by scissors and bleeders are coagulated by bipolar cautery. Now, 0.9 ml 40% human albumin is taken in 1 ml syringe and mixed with 0.1 ml of 10% glutaraldehyde solution. The syringe is shaken vigorously to mix both the components. The skin and mucosa of penis are held by tooth forceps and a thin layer of this mixture is layered over it all around. Infrared Laser of 5 watts power and 850 nm illuminated over this bond for 60 seconds to polymerize it. Results: In group A, 2 (3.9%) patients developed partial wound gape, no patient had complete wound gape. 3 (5.88%) patients had grade 2 infections which settled with conservative treatment of oral antibiotics. In group B, 6 (10.71%) patients had partial wound gape and 8 (14.28%) patients had complete wound gapping. 11 (19.64%) patients developed grade 2 and 8 (14.28%) patients grade 3 wound infection. All these 19 patients’ post-operative antibiotics were started and given for 7 - 10 days. The Glutaraldehyde albumin mixture bond is already described in medical literature (Bioglue) for its use to seal coronary anastomosis after CABG operation, to seal sutures of cardiac surgery and for aortic dissection, etc. It is a surgical adhesive composed of purified bovine serum albumin (BSA) and glutaraldehyde and is already American FDA approved. It creates a flexible mechanical seal independently of the body’s clotting mechanism. In my technique, 0.9 ml of 40% human albumin is mixed with 0.1 ml 10% glutaraldehyde solution which costs only 50 cents which is a massive 1000 times cost reduction. Laser application polymerizes the glue and forms a waterproob bond in less than a minute. In my technique, percentage of glutaraldehyde used is only 10% compared to 50% in bioglue, hence it is non-toxic to the tissues. Conclusion: Suture-less circumcision by glutaraldehyde albumin glue enhanced Laser tissue welding is a safe, cheap and effective technique of performing circumcision. It is an important advance in circumcision surgery after a long time. The technique becomes a foundation for its vast application in other areas of surgery.
基金Supported by Tianjin Science and Technology Planning Project(No.18PTSYJC00140)
文摘A crosslinked chitosan film with α-tocopherol was produced by a solution casting method. The appearance, mechanical properties, morphology, barrier properties and release kinetics of the α-tocopherol were evaluated. The addition of glutaraldehyde and α-tocopherol decreased the lightness and greenness and increased the yellowness of the chitosan-based film. Moreover, it also affected the compatibility of the film due to a decrease in the opacity values. The elongation at break(EB) and tensile strength(TS) values of the film decreased when the glutaraldehyde and α-tocopherol were added. In contrast, the Young’s modulus(YM) values increased. SEM micrographs showed coarse spots and pores on the surface and cross-section of the film when compared with the chitosan film. Based on the results, it was indicated that the chitosan structure was disconnected by the α-tocopherol, and the glutaraldehyde as a crosslinking agent generated a link between the chitosan network, which could be the cause of the reduced flexibility and the increased surface roughness of the film. However, the glutaraldehyde and α-tocopherol did not result in a significant difference in water vapour permeability(WVP) values. The glutaraldehyde influenced the release kinetics of the α-tocopherol as seen by the decrease of the diffusion coefficient values that were calculated using the Fickian diffusion model.
基金Projects (60377032, 60537050) supported by the National Natural Science Foundation of China
文摘The immobilizing procedure has great influence on the activity of the immobilized laccase. The laccase was immobilized on copper tetraaminophthalocyanine (CuTAPc)-Fe3O4 magnetic nano-composite by glutaraldehyde crosslinking method via a two-step reaction. For 1 g nano-composite, the optimum pH value, the quantity, the concentration and reaction time of glutaraldehyde are 7.0, 10 mL, 10% and 4 h, respectively. In the second step the optimum pH value, reaction temperature and reaction time of laccase are 5.0, 0 ℃ and 2 h, respectively. The average diameter of the immobilized laccase is 78 nm, the saturation magnetization (Ms) of the immobilize laccase is 23.45 A·m2/kg and the surface area of the immobilized laccase is 115.03 m2/g. When 2.0 mg/mL laccase solution is used under optimum conditions and 2, 2′-azino-bis-(3-ethylbenzothiazoling-6-sulphonic acid) is used as substrate, the activity of immobilized laccase reaches 1 430 U/g (nano-composite) and the Michealis-Menten constant(Km) of the immobilized laccase is 2.38×10?5 mol/L.
文摘This study compares the crude oil removal efficiency of free and biosurfactant-producing bacterial consortia(Bacillus tequilensis NR_104919 and Bacillus axarquiensis NR_115929)entrapped in chitosan(CH),chitosan/glutaraldehyde(CH/GA),and chitosan/Na-bentonite(CH/BNT)matrices.Additionally,the mechanical and thermal stability,swelling capacity,surface morphology,and chemical bonding of these composites were evaluated.Initially,the biosurfactant produced by the consortium was identified using screening methods,and its lipopeptide structure was confirmed through TLC and 1H NMR analyses,with a yield of 0.2 g/L.Following characterization,the biosurfactant-producing bacterial consortium was immobilized onto CH,CH/GA,and CH/BNT beads for further assessment.When comparing the oil removal capacities of the composites,the consortium immobilized in the CH/BNT matrix exhibited significantly higher crude oil removal efficiency than those entrapped in CH,CH/GA,and the free consortium.The maximum oil removal by the CH/BNT-entrapped consortium was achieved under optimized conditions:0.5 mL crude oil,0.1 g Na-bentonite,pH=6.0,at 35℃,over a 7-day incubation period.However,a decline in oil remediation performance was observed from the fourth reuse cycle onward.These laboratory-scale findings were further validated through ex-situ simulation and long-term experiments,confirming the potential of the CH/BNT composite for effective and sustainable petroleum pollutant remediation.The swelling capacity of inactivated CH was comparable to that of the CH/BNT composite,with both exhibiting greater swelling than CH/GA beads.Additionally,CH/BNT beads demonstrated superior mechanical stability relative to CH and CH/GA,which showed similar stability profiles.Thermal stability,surface morphology,and chemical bonding of the CH,CH/GA,and CH/BNT composites were characterized using TGA,FT-IR,and SEM analyses.CH/BNT composite represents an effective,economical,and environmentally benign alternative to costly synthetic materials for the remediation of oil pollution in aquatic environments.This study highlights the potential of chitosan/Na-bentonite-based composites as sustainable solutions for petroleum pollutant removal,while recommending pilot-scale investigations to assess their feasibility and performance under real-world conditions.
基金Acknowledgements This work was supported by the National Natural Science Foundation of China （Grant Nos. 20906026 and 51101058） and Shanghai Pujiang Program （09PJ1402900）.
文摘Hydrogen sulfide emission in sewer systems is associated with toxicity, corrosion, odour nuisance and high costs treatment. In this study, a novel method to inhibit sulfide generation from sewage by means of glutaraldehyde supplementation has been suggested and evaluated under anaerobic conditions. Different concentra- tions of glutaraldehyde at 10, 15, 20, 30 and 40mg.L1 have been investigated. Besides, the possible impacts of glutaraldehyde supplementation on an activated sludge system and an appraisal of the economic aspects are presented as well. As observed from the experimental results, a dosage of 20 mg. L-1 glutaraldehyde resulted in a significant decrease of the sulfide production by 70%-80% in the simulated sewage. Moreover, the impacts of additional glutaraldehyde at 20mg·L^-1 on activated sludge, in terms of chemical oxygen demand removal and oxygen uptake rates, were negligible. From an economical point of view, the cost of the commercial glutaraldehyde products required in the operation, which was calculated on the basis of activated sulfide removal avoidance, was around ε3.7-4.6 S·kg^-1. Therefore it is suggested that glutaraldehyde supplementation is a feasible technique to abate the sulfide problems in sewer systems. Yet further research is required to elucidate the optimum ＂booster＂ dosage and the dosing frequency in situ accordingly.
基金supported by China National Key-Point Research and Development Program of the 13th[Grant number:2017YFC1105003]Young Scientist Research and Development Program of National Institutes for Food and Drug Control[Grant number:2019C4].
文摘Glutaraldehyde(GA)is an important additive that is mainly used in animal-derived biomaterials to improve their mechanical and antimicrobial capacities.However,GA chemical toxicity and the metabolic mechanism remain relatively unknown.Therefore,residual GA has always been a major health risk consideration for animal-derived medical devices.In this study,extracts of three biopatches were tested via the GA determination test and mouse lymphoma assay(MLA).The results showed that dissolved GA was a potential mutagen,which could induce significant cytotoxic and mutagenic effects in mouse lymphoma cells.These toxic reactions were relieved by the S9 metabolic activation(MA)system.Furthermore,we confirmed that GA concentration decreased and glutaric acid was generated during the catalytic process.We revealed GA could be oxidized via cytochrome P450 which was the main metabolic factor of S9.We found that even though GA was possibly responsible for positive reactions of animal-derived biomaterials’biocompatibility evaluation,it may not represent the real situation occurring in human bodies,owing to the presence of various detoxification mechanisms including the S9 system.Overall,in order to achieve a general balance between risk management and practical application,rational decisions based on comprehensive analyses must be considered.
基金the State Key Laboratory of Pulp and Paper Engineering,South China University of Technology(Grant No.2015C09,2016PY01)Natural Science Foundation of Guangdong Province(Grant No.2016A030311052).
文摘In this study,cellulose nanofibers(CNFs)were crossed-linked with glutaraldehyde(GA)under acid condition for tailoring the mechanical properties and water-resistance of nanopaper or films.The impact of carboxyl content of CNFs,GA concentration,temperature,pH,and reaction time on the crosslinking was investigated,and the process conditions for the crosslinking were optimized.FT-IR analyses showed that CNFs/GA cross-linked nanopaper was successfully fabricated by acetalization between the-OH groups of CNFs and the-CHO groups of GA,resulting in the formation of a dense,three-dimensional network.The elastic modulus of CNFs/GA cross-linked film was 7.66GPa,62.98%higher than that of CNFs film.The water-resistance of the cross-linked CNFs/GA films was improved.The crossed-linked CNFs/GA films was still intact after 24 h after being immersed in water,while the CNFs films almost dissolved completely after 20 min of soaking in water.This method provides a facile route to enhance the elastic modulus and water-resistance of CNFs for potential applications including bullet-proof glass interlayer,flexible electronic device,and new packing materials.
基金financially supported by Chongqing Research Program(cstc2018jcyjAX0742)of Basic ResearchFrontier Technology,Scientific and Technological Research Program(KJQN201900521)of Chongqing Education Committee+1 种基金Scientific Research Fund(2019YJ0307)of Sichuan Provincial Science and Technology DepartmentDazhou Municipal Science Project(18YYJC0002)of Technology Bureau Application Foundation
文摘We established a f uorescence“turn-on”sensing platform for glutathione(GSH)detection utilizing chitosan-based glutaraldehyde non-conjugated polymers(GCPF)as nanomaterials via f uorescence resonance energy transfer(FRET)principle.Owing to the overlapping property of absorption spectrum of MnO^(2)nanosheets with f uorescence spectrum of GCPF,f uorescent intensity of GCPF was quenched in the presence of MnO^(2)nanosheets because of FRET principle.When GSH was added,MnO^(2)nanosheets were reduced and decomposed into large amounts of Mn^(2+)ions owing to reducing property of GSH.Accordingly,the quenched f uorescent intensity was turned on again.Therefore,this platform based on MnO^(2)nanosheet has been f rst applied to f uorescence“turn-on”detection of GSH from 0.5 to 50μmol/L with sdetection limit of 84 nmol/L.It showed high selectivity in GSH detection towards other ions and biomolecules such as L-lysine,L-threonine,L-valine,L-glutamic acid and DL-aspartic acid.When it was utilized in detecting GSH in serum samples,satisfactory recoveries ranged from 101.5%to 103.2%,indicating the accuracy of this f uorescence“turn-on”platform in bioanalysis.
