This paper presents a standardised workflow for conducting hazard assessments of mass wasting processes in remote mountain areas with limited data.The methodology integrates geomorphological mapping and remote sensing...This paper presents a standardised workflow for conducting hazard assessments of mass wasting processes in remote mountain areas with limited data.The methodology integrates geomorphological mapping and remote sensing techniques and is adaptable to different national standards,thus ensuring its applicability in a variety of contexts.The principal objective is to guarantee the safety of mountainous regions,particularly in the vicinity of essential infrastructure,where the scope for implementing structural measures is restricted.The framework commences with comprehensive geomorphological mapping,which facilitates the identification of past hazardous processes and potential future hazards.New technologies,such as uncrewed aerial vehicles(UAVs),are employed to create high-resolution DEMs,which are particularly beneficial in regions with limited data availability.These models facilitate the assessment of potential hazards and inform decisions regarding protective measures.The utilisation of UAVs enhances the accuracy and efficiency of data collection,particularly in remote mountainous regions where alternative remotely sensed information may be unavailable.The integration of modern approaches into traditional hazard assessment methods allows for a comprehensive analysis of the spatial distribution of factors driving mass wasting processes.This workflow provides valuable insights that assist in the prioritisation of interventions and the optimisation of risk reduction in high mountainous areas.展开更多
Geomorphological features are commonly used to identify potential landslides.Nevertheless,overemphasis on these features could lead to misjudgment.This research proposes a process-oriented approach for potential lands...Geomorphological features are commonly used to identify potential landslides.Nevertheless,overemphasis on these features could lead to misjudgment.This research proposes a process-oriented approach for potential landslide identification that considers time-dependent behaviors.The method integrates comprehensive remote sensing and geological analysis to qualitatively assess slope stability,and employs numerical analysis to quantitatively calculate aging stability.Specifically,a time-dependent stability calculation method for anticlinal slopes is developed and implemented in discrete element software,incorporating time-dependent mechanical and strength reduction calculations.By considering the time-dependent evolution of slopes,this method highlights the importance of both geomorphological features and time-dependent behaviors in landslide identification.This method has been applied to the Jiarishan slope(JRS)on the Qinghai-Tibet Plateau as a case study.The results show that the JRS,despite having landslide geomorphology,is a stable slope,highlighting the risk of misjudgment when relying solely on geomorphological features.This work provides insights into the geomorphological characterization and evolution history of the JRS and offers valuable guidance for studying slopes with similar landslide geomorphology.Furthermore,the process-oriented method incorporating timedependent evolution provides a means to evaluate potential landslides,reducing misjudgment due to excessive reliance on geomorphological features.展开更多
The Longchuan River basin lies within the China Sichuan-Yunnan rhomboid block.The NS-trending Yuanmou-Lvzhi River Fault(YLF),NW-trending Chuxiong-Nanhua Fault(CNF)and Shiyang-Huoshaotun Fault(HSF)are found within the ...The Longchuan River basin lies within the China Sichuan-Yunnan rhomboid block.The NS-trending Yuanmou-Lvzhi River Fault(YLF),NW-trending Chuxiong-Nanhua Fault(CNF)and Shiyang-Huoshaotun Fault(HSF)are found within the basin.The nature of the faults is complex,and the tectonic activity distribution characteristics require further clarification.By extraction from a digital elevation model,the measured longitudinal profile and the geomorphic indices of the Longchuan River,basin showed a stream-length gradient index(SL)of 49–650,hypsometric integral(HI)of 0.27–0.58,drainage basin asymmetry factor(AF)of 3.29–27.47,basin shape index(BS)of 0.87–2.75,valley floor width-to-height ratio(VF)of 0.06–5.40,and evaluation of relative tectonic activity(Iat)of 1.6–2.6.Results showed that river morphology and geomorphological indices in the Longchuan River basin were influenced by tectonic activity,bedrock lithology,climatic conditions,and development time,with tectonic activity playing a dominant role.The relative tectonic activity of the Longchuan River basin was zoned,with a gradual increase in relative tectonic activity from the south to the north.That the slip fault zone primarily controls the tectonic deformation of the Longchuan River basin in central Yunnan and the dynamics of the central Yunnan massif are consistent with the“rigid block lateral extrusion”1model.展开更多
The Arun and Tista Rivers,which flow across the Himalayas,are commonly known as antecedent valleys that overcame the rapid uplift of the Higher Himalayan ranges.To clarify whether the idea of antecedent rivers is acce...The Arun and Tista Rivers,which flow across the Himalayas,are commonly known as antecedent valleys that overcame the rapid uplift of the Higher Himalayan ranges.To clarify whether the idea of antecedent rivers is acceptable,we investigated the geomorphology of the Himalayas between eastern Nepal and Bhutan Himalayas.The southern part of Tibetan Plateau,extending across the Himalayas as tectonically un-deformed glaciated terrain named as'Tibetan Corridor,'does not suggest the regional uplift of the Higher Himalayas.The 8,000-m class mountains of Everest,Makalu,and Kanchenjunga are isolated residual peaks on the glaciated terrain composed of mountain peaks of 4,000–6,000 m high.The Tibetan glaciers commonly beheaded by Himalayan glaciers along the great watershed of the Himalayas suggest the expansion of Himalayan river drainage by glaciation.For the narrow upstream regions of the Arun and Tista Rivers with less precipitation behind the range,it is hard to collect enough water for the power of down-cutting their channels against the uplifting Himalayas.The fission track ages of the Higher Himalayan Crystalline Nappe suggest that the Himalayas attained their present altitude by 11–10 Ma,and the Arun and Tista Rivers formed deep gorges across the Himalayas by headward erosion.展开更多
Landform mapping is the initial step of many geomorphological analyses(e.g.assessment of natural hazards and natural resources)and requires vast resources to be applied to wide areas at high-resolution.Among geomorpho...Landform mapping is the initial step of many geomorphological analyses(e.g.assessment of natural hazards and natural resources)and requires vast resources to be applied to wide areas at high-resolution.Among geomorphological objects,we focus on glacial moraine mapping,since it is a task relevant to many fields(e.g.paleoclimate and glacial geomorphology).Here we proposed to exploit the potential of Deep Learning-based approaches to map moraine landforms by exploiting multi-source remote sensing imagery.To this end,we propose the first Deep Learning model to map glacial moraines,namely MorNet.As multi-source remote sensing information,we combine together three different sources:Topographic(Pleiades-derived DSM),Multispectral(Sentinel-2),and SAR(Sentinel-1)data.To cope with such heterogeneous information,the proposed model has a dedicated branch for each input source and,a late fusion mechanism is leveraged to combine them with the aim to provide the final mapping.The performance of the MorNet model is evaluated on several glacier valleys in China in the Himalayan range.This area contains minimally eroded moraines,so they are well-defined and of varied morphology.The behavior of the proposed method is compared to models using individual mono-source models in order to highlight the benefit to simultaneously leverage multi-source information.The use of multi-source data allows MorNet to exploit the complementarity of the three input sources and improve its performance from an f1-score of about 41.6 using a single source to 52.8 using three sources.MorNet provides a first-order moraine map through its ability to identify well-defined moraines.Consequently,MorNet can identify areas likely to contain moraines and intends to be used as a tool by experts to facilitate and support large-scale mapping.展开更多
Geomorphologic maps are one of the most fundamental materials of the natural environment. They have been widely used in scientific research,resource exploration and extraction,education and military affairs etc. An ed...Geomorphologic maps are one of the most fundamental materials of the natural environment. They have been widely used in scientific research,resource exploration and extraction,education and military affairs etc. An editorial committee was established in 2001 to collect materials for researching and compiling a set of new 1：1,000,000 geomorphologic atlas of China. A digital geomorphologic database was created with visual interpretation from Landsat TM/ETM imageries and SRTM-DEM etc. The atlas compiled from the database was finished. The main characteristics of the atlas are as follows：Firstly,Landsat TM/ETM imageries,published geomorphologic maps or sketches,geographical base maps,digital geological maps,and other thematic maps were collected,which were uniformly geometrically rectified,clipped into uniform sheets,and stored in the foundation database. Secondly,based on the legends of 15 sheets 1：1,000,000 maps published in the 1980s,a geomorphologic classification system was built by combining morphology and genesis types. The system comprised seven hierarchical layers：basic morphology,genesis,sub-genesis,morphology,micro-morphology,slope and aspect,material composition and lithology. These layers were stored in the database during visual image interpretation. About 2000 kinds of morpho-genesis and 300 kinds of morpho-structure were interpreted. Thirdly,the legend system was built,which included color,symbol bases and note bases etc.,compilation standards and procedures were developed,74 sheets of 1：1,000,000 covering all land and sea territories of China were compiled,the 1：1,000,000 geomorphologic atlas of the People＇s Republic of China was finished and published. The atlas will fill the blanks in national basic scale thematic maps,and the geomorphologic database could be applied widely in many fields in the future.展开更多
Geomorphological regionalization(geomor-region)and geomorphological type(geomor-type)classification are two core components in the geomorphologic research.Although remarkable achievements have been made in the study o...Geomorphological regionalization(geomor-region)and geomorphological type(geomor-type)classification are two core components in the geomorphologic research.Although remarkable achievements have been made in the study of geomor-region,many deficiencies still exist,such as the inconsistency of landform indicators,the small quantity of division orders,disparities of geomorphological characteristics,differences of mapping results,and the small scale of zoning maps.Requirements for improved national geomor-regions are therefore needed for the purpose of an enhanced national geo-information system.Based on theories of geomor-region in China including plate tectonics,crustal features,endogenic and exogenic forced geomorphological features,and regional differentiations of geomor-type,a three-order(major-region,sub-region,and small-region)research program on China’s geomor-regions is proposed on the basis of previous 2013 geomor-region system.The major contents of the new geomor-region scheme are:(1)principles of the national multi-order geomor-regions;(2)hierarchical indicator systems of geomor-regions including characteristics of the terrain ladder under the control of tectonic setting,combinations of regional macro-form types,combinations of endogenic and exogenic forces and basic types of morphology,combinations of regional morphological types,and combinations of regional micro-morphological types;(3)naming rules and coding methods of geomor-regions;and(4)precise positioning techniques and methods of multi-order geomor-region divisions based on multi-source data.Using the new geomor-region theory and division methodology,the partition of national three-order geomor-regions of China was successfully constructed.The geomor-region system divided China into six first-order major-regions,36 second-order sub-regions,and 136 third-order small-regions.In addition,a database and management information system of the national geomor-regions were established.This research has an important guiding significance for promoting the development of China’s regional geomorphology and for practical applications based on geomor-regions.展开更多
There are several basins with high sediment yield in the Pisha-sandstone covering area of the east wing of the Ordos Plateau. Due to the lack of targeted research on the dynamical characteristics of geomorphic evoluti...There are several basins with high sediment yield in the Pisha-sandstone covering area of the east wing of the Ordos Plateau. Due to the lack of targeted research on the dynamical characteristics of geomorphic evolution that plays an important role in the sand production, this paper analyzed the tectonic activity intensity and erosion characteristics of the area. The results show that the intensity of tectonic activities in the area is generally moderateweak and shows an unconspicuous increase from north to south. Tectonic activity is manifested mainly in the form of uplift. The uplift rate in the lower reaches of each basin is greater than the erosion rate,which is prominent in the Kuyehe and the Tuweihe rivers. During the uplift of the regional topography,the most serious parts under erosion are generally concentrated in the upstream and midstream of basins. All longitudinal profiles of the basins have a shape close to an exponential function, which indicates that they are in the early stage of erosion evolution. The mechanisms of geomorphologic evolution of these basins have a great similarity. The conservative estimate of historical average erosion rate was less than 182–520 t/(km^2·yr), much less than that of the modern times. The average stream power values are typically distributed between 4 and102 W/m, with the larger being in the Kuyehe and the Tuweihe rivers and the smallest being in the Qinshuihe River. The maximum stream power value appears in the downstream reach, which should be the main reason for the particles being directly injected into the Yellow River. From the perspective of geomorphological evolution, the current soil and water conservation measures can hardly cure the erosion of these basins in the long run.展开更多
Deep-seated catastrophic landslides,particularly rock or debris avalanches,travel extremely rapidly for long distances,causing severe damage over wide areas.This paper summarizes the geological and geomorphological fe...Deep-seated catastrophic landslides,particularly rock or debris avalanches,travel extremely rapidly for long distances,causing severe damage over wide areas.This paper summarizes the geological and geomorphological features of such events,which were induced by earthquakes and rainstorms in Asia,and then uses these features to predict future potential sites of failures.Most of the rock avalanches are preceded by gravitational slope deformation with topographic features,in which small scarps along future head of landslide are the most representative;the scarps can be identified in topographic images made by highresolution airborne LiDAR DEMs and may suggest the instability just before catastrophic failure.展开更多
Landforms are an important factor determining the spatial pattern of cropland through allocation of surface water and heat. Therefore, it is of great importance to study the change in cropland distribution from the pe...Landforms are an important factor determining the spatial pattern of cropland through allocation of surface water and heat. Therefore, it is of great importance to study the change in cropland distribution from the perspective of geomorphologic divisions. Based on China's multi-year land cover data(1990, 1995, 2000, 2005, 2010 and 2015) and geomorphologic regionalization data, we analyzed the change in cropland area and its distribution pattern in six geomorphologic regions of China over the period of 1990-2015 with the aid of GIS techniques. Our results showed that the total cropland area increased from 177.1 to 178.5 million ha with an average increase rate of 0.03%. Cropland area decreased in southern China and increased in northern China. Region I(Eastern hilly plains) had the highest cropland increase rate, while the cropland dynamic degree of Region IV(Northwestern middle and high mountains, basins and plateaus) was significantly higher than that of other regions. The barycenter of China's cropland shifted from northern China to the northwest over the 25-year period. Regions IV and I were the two regions with the greatest increase of cropland. Region II(Southeastern low and middle mountains) and Region V(Southwestern middle and low mountains, plateaus and basins) were the main decreasing cropland regions. The area of cropland remained almost unchanged in Region III(Northern China and Inner Mongolia eastern-central mountains and plateaus) and Region VI(Tibetan Plateau). The loss of cropland occurred mostly in Regions I and II as a result of growing industrialization and urbanization, while the increase of cropland occurred mainly in Region IV because of reclamation of grassland and other wasteland. These analyzing results would provide fundamental information for further studies of urban planning, ecosystem management, and natural resourcesconservation in China.展开更多
Eight representative beach profiles on the eastern coast of the Shandong Peninsula are observed and measured in 2011 and 2012 to determine the coastal processes under the lower tropical wind speed condition and the be...Eight representative beach profiles on the eastern coast of the Shandong Peninsula are observed and measured in 2011 and 2012 to determine the coastal processes under the lower tropical wind speed condition and the beach response to and recovery from the tropical storm Meari in a rare typhoon region. The results show that it is the enhancement and directional change of cross-shore and longshore sediment transports caused by Meari that leads to the beach morphological changes, and most of the sediment transports occur during the pre-Meari landing phase. The erosional scarp formation and the berm or beach face erosion are the main geomorphological responses of the beaches to the storm. The storm characteristics are more important than the beach shapes in the storm response process of the beaches on Shandong Peninsula. The typhoon is a fortuitous strong dynamic event, and the effect on the dissipative beach is more obvious than it is on the reflective beach in the study region. Furthermore, the beach trend is the main factor that controlls the storm effect intensity, and it is also closely related to the recovery of the beach profiles.展开更多
Coastline configuration indexes of 34 typical arc-shaped coasts in South China are investigated by the method of principal component analysis, and meanwhile deposition and geomorphologic features of arc-shaped coast a...Coastline configuration indexes of 34 typical arc-shaped coasts in South China are investigated by the method of principal component analysis, and meanwhile deposition and geomorphologic features of arc-shaped coast are also analyzed. The results show: (1) The configuration of arc-shaped coast in South China is of the characteristic of variability and complexity. (2) The wave power and the openings of the bay are the decisive factors to result in the changes of the configuration of the arc-shaped coast in South China, however, incidence direction of the wave has no effect on configuration development of the coast. (3) Commonly, geomorphologic modes of the arc-shaped coast system in South China consist of barriers, lagoons and tidal-inlets, and can be divided into four types:the openings of the bay leaning to the east, the openings of the bay leaning to the south, the openings of the bay leaning to the west and the openings of the bay leaning to the north.展开更多
Based on geomorphologic and digital elevation model(DEM) data, the topographic characteristics of the northwestern edge of the Qinghai-Tibet Plateau are analyzed. Five representative peaks are first determined accordi...Based on geomorphologic and digital elevation model(DEM) data, the topographic characteristics of the northwestern edge of the Qinghai-Tibet Plateau are analyzed. Five representative peaks are first determined according to the topographic profile maps for the ridge and piedmont lines, and then the topographic gradient characteristics are analyzed according to the representative topographic profile acquisition method.Based on the geomorphologic database data, the regions between the ridge and the piedmont lines are divided into four geomorphologic zones; and the topographic characteristics are finally analyzed for the different geomorphologic zones regions using the DEM data. The research results show that from the piedmont to the ridge, there exist four geomorphologic zones: arid, fluvial, periglacial and glacial. The arid has the lowest elevation, topographic gradient, relief and slope characteristics. The fluvial has lower elevation and the highest topographic gradient, but with lower relief and slope characteristics. With higher elevation, the periglcial has lower topographic gradient, but the highest relief and slope characteristics. The glacial has the highest elevation with higher topographic gradient, relief and slope characteristics.展开更多
The geomorphological environment is one of the most fundamental variables affecting the development of human society. The mission of geomorphological environment research is to explore the most basic environment and f...The geomorphological environment is one of the most fundamental variables affecting the development of human society. The mission of geomorphological environment research is to explore the most basic environment and features of our Earth＇s surface morphology. The results can be applied to resource evaluation, environmental protection and reducing and preventing geological disasters. Thus, it can serve to help achieve sustainable development. This paper examines the Shenzhen east coastal zone as a case strongly influenced by urban expansion. We use modern geomorphological theory and methods, along with GIS and RS techniques, to reveal key characteristics of the geomorphological environment and landform classification. Furthermore, coastal ecosystem evaluation and regional resources sustainable utilization should be considered relative to the corresponding geomorphological environment. Based on this study, we conclude that modern geomorphological theory and methods, supported by ＂3S＂ techniques including GIS, RS and GPS, can play an important role in resolving the environment, resources and population problems as well as sustainable development challenges facing humankind at present.展开更多
Soil thickness,intended as depth to bedrock,is a key input parameter for many environmental models.Nevertheless,it is often difficult to obtain a reliable spatially exhaustive soil thickness map in widearea applicatio...Soil thickness,intended as depth to bedrock,is a key input parameter for many environmental models.Nevertheless,it is often difficult to obtain a reliable spatially exhaustive soil thickness map in widearea applications,and existing prediction models have been extensively applied only to test sites with shallow soil depths.This study addresses this limitation by showing the results of an application to a section of Wanzhou County(Three Gorges Reservoir Area,China),where soil thickness varies from 0 to40 m.Two different approaches were used to derive soil thickness maps:a modified version of the geomorphologically indexed soil thickness(GIST)model,purposely customized to better account for the peculiar setting of the test site,and a regression performed with a machine learning algorithm,i.e.,the random forest,combined with the geomorphological parameters of GIST(GIST-RF).Additionally,the errors of the two models were quantified,and validation with geophysical data was carried out.The results showed that the GIST model could not fully contend with the high spatial variability of soil thickness in the study area:the mean absolute error was 10.68 m with the root-mean-square error(RMSE)of 12.61 m,and the frequency distribution residuals showed a tendency toward underestimation.In contrast,GIST-RF returned a better performance with the mean absolute error of 3.52 m and RMSE of 4.56 m.The derived soil thickness map could be considered a critical fundamental input parameter for further analyses.展开更多
The Philippine Sea is the largest marginal sea in the Western Pacific Ocean and is divided into two parts by the Kyushu-Palau Ridge(KPR).The western part is the West Philippine Basin,and the eastern part consists of t...The Philippine Sea is the largest marginal sea in the Western Pacific Ocean and is divided into two parts by the Kyushu-Palau Ridge(KPR).The western part is the West Philippine Basin,and the eastern part consists of the Shikoku and Parece Vela basins.Based on surveyed data of massive high-resolution multibeam bathymetric data and sub-bottom profiles data collected from the southern section of the KPR from 2018 to 2021,this paper analyzes the topographic and geomorphological features,shallow sedimentary features,and tectonic genesis of the southern section of the KPR,obtaining the following conclusions.The southern section of the KPR has complex and rugged topography,with positive and negative topography alternatingly distributed and a maximum height difference of 4086 m.The slope of seamounts in this section generally exceeds 10°and is up to a maximum of 59°.All these contribute noticeably discontinuous topography.There are primarily nine geomorphological types in the southern section of the KPR,including seamounts,ridges,and intermontane valleys,etc.Among them,seven independent seamount groups are divided by five large troughs,forming an overall geomorphological pattern of seven abyssal seamount groups and five troughs.This reflects the geomorphological features of a deep oceanic ridge.Intramontane basins and intermontane valleys in the southern section of the KPR are covered by evenly thick sediments.In contrast,sediments in ridges and seamounts in this section are thin or even missing,with slumps developing locally.Therefore,the sediments are discontinuous and unevenly developed.The KPR formed under the control of tectonism such as volcanic activities and plate movements.In addition,exogenic forces such as underflow scouring and sedimentation also play a certain role in shaping seafloor landforms in the KPR.展开更多
Rapid change of climate in vertical and considerable geomorphologic features form a typical diversity and distribution of biota in mountain ecosystems,i.e.,the subalpine forest zone(SFZ),the valley savanna zone(VSZ),a...Rapid change of climate in vertical and considerable geomorphologic features form a typical diversity and distribution of biota in mountain ecosystems,i.e.,the subalpine forest zone(SFZ),the valley savanna zone(VSZ),and the transition zone between them.The arid hot valley in the middle and lower reaches of Jinsha River,China represents a well target area to study distribution and the driving factors in these typical mountain ecosystems.Therefore,this study selects four sub-sample areas in the arid-hot valley to explore the distinctive changes of vegetation during 1990 to 2020,and their driving factors in the three different vegetation zones on spatiotemporal scales.On the spatial scale,the Moran’s index was applied to identify the transition zone between the SFZ and the VSZ.Results show that the VSZ at low altitudes(less than 600-1000 m from the valley bottom)is mainly affected by geomorphologic features,especially the slope aspect.With increase in altitude,the climate factors(e.g.,humidity,temperature,etc.)play a more significant role in the development of the SFZ,while the effect of geomorphologic features gradually weakens.On the time scale,The SFZ at higher altitudes experienced more rapid changes in temperature(temperature increase of 1.41°C over the last 60 years)than the VSZ at lower altitudes(temperature increase of 0.172°C over the past 60 years).It caused the forest cover increase faster than that of savanna grassland.Humidity and heat conditions are altered by topography and climate conditions,which shapes the development and physiology of plants as they adapt to the different climatic zones.Furthermore,according to the driving factors(geomorphologic and climate factors)of vegetation distribution found in this study,it suggests that suitable tree species should be planted in the transition zone to evolve into the forest zone and making the forest zone to recover from high to low altitudes gradually.展开更多
Dune networks are widely distributed in the world＇s deserts,which include primary ridges and secondary ridges.However,they have not been sufficiently studied in a systematic manner and their origins and spatial and m...Dune networks are widely distributed in the world＇s deserts,which include primary ridges and secondary ridges.However,they have not been sufficiently studied in a systematic manner and their origins and spatial and morphological characteristics remain unclear.To provide information on the geomorphology of dune networks,we analyze the software geomorphologic patterns of the dune networks in China＇s Tengger Desert using matrix and laboratory to process remote-sensing images.Based on analysis of image features and their layout in a topographic map,we identify two types of dune networks （square and rectangular dune networks） with different size and morphological structures in the Tengger Desert.Four important geomorphic pattern parameters,ridge length,spacing,orientation and defect density,are analyzed.The length of primary ridges of dune networks decreases from northwest of the desert to the southeast,resulting an increasing spacing and a transition from rectangular dune networks to square dune networks.Wind regime and sediment supply are responsible for the variation in pattern parameters.We use the spacing and defect density data to estimate the construction time of dune networks and found that the dune networks in the Tengger Desert formed since about 1.3 ka BP.展开更多
China’s first Mars exploration mission,Tianwen-1,successfully landed in southern Utopia Planitia on Mars on May 15,2021.This work presents a detailed investigation of the geologic context of the landing area surface ...China’s first Mars exploration mission,Tianwen-1,successfully landed in southern Utopia Planitia on Mars on May 15,2021.This work presents a detailed investigation of the geologic context of the landing area surface for this mission based on orbital remotesensing data.We constructed a geomorphologic map for the Tianwen-1 landing area.Results of our detailed geomorphologic map show several major landforms within the landing area,including rampart craters,mesas,troughs,cones,and ridges.Analysis of materials on the landing area surface indicates that most of the landing area is covered by Martian dust.Transverse aeolian ridges are widely distributed within the landing area,indicating the surface contexts were(and still are)modified by regional winds.In addition,a crater counting analysis indicates the landing area has an absolute model age of~3.3 Ga and that a later resurfacing event occurred at~1.6 Ga.Finally,we outline four formational scenarios to test the formation mechanisms for the geomorphologic features on the landing area surface.The most likely interpretation to explain the existence of the observed surface features can be summarized as follows:A thermal influence may have played an important role in the formation of the surface geomorphologic features;thus,igneous-related processes may have occurred in the landing area.Water ice may also have been involved in the construction of the primordial surface configuration.Subsequent resurfacing events and aeolian processes buried and modified the primordial surface.展开更多
Digital elevation model （DEM） can be generated by interferometric synthetic aperture radar （InSAR）. In this paper, the interferometric processing and analyses are carried out for Damxung-Yangbajain area in Tibet, ...Digital elevation model （DEM） can be generated by interferometric synthetic aperture radar （InSAR）. In this paper, the interferometric processing and analyses are carried out for Damxung-Yangbajain area in Tibet, using a pair of Europe remote-sensing satellite （ERS）-1/2 tandem SAR images acquired on 6 and 7 April 1996. A portion of the In- SAR-derived DEM is selected and compared with the 1：50 000 DEM to determine the precision of the InSAR-derived DEM. The comparison indicates that the root mean squared errors （RMSE）, which are used to evaluate error, are about 35, 60, 10, and 15 m in the studied area, mountainous area, basin area and near-fault area, respectively, suggesting that obvious errors are mainly in mountainous area. Besides, the limitation of InSAR technology to generate DEM is analyzed. Our investigation shows that InSAR is an effective tool in geodesy and an important complement to field surveying in some dangerous areas.展开更多
基金Open access funding provided by University of Natural Resources and Life Sciences Vienna(BOKU).
文摘This paper presents a standardised workflow for conducting hazard assessments of mass wasting processes in remote mountain areas with limited data.The methodology integrates geomorphological mapping and remote sensing techniques and is adaptable to different national standards,thus ensuring its applicability in a variety of contexts.The principal objective is to guarantee the safety of mountainous regions,particularly in the vicinity of essential infrastructure,where the scope for implementing structural measures is restricted.The framework commences with comprehensive geomorphological mapping,which facilitates the identification of past hazardous processes and potential future hazards.New technologies,such as uncrewed aerial vehicles(UAVs),are employed to create high-resolution DEMs,which are particularly beneficial in regions with limited data availability.These models facilitate the assessment of potential hazards and inform decisions regarding protective measures.The utilisation of UAVs enhances the accuracy and efficiency of data collection,particularly in remote mountainous regions where alternative remotely sensed information may be unavailable.The integration of modern approaches into traditional hazard assessment methods allows for a comprehensive analysis of the spatial distribution of factors driving mass wasting processes.This workflow provides valuable insights that assist in the prioritisation of interventions and the optimisation of risk reduction in high mountainous areas.
基金supported by the National Natural Science Foundation of China(Grant Nos.41972284 and 42090054)This work was also supported by the State Key Laboratory of Geohazard Prevention and Geoenvironment Protection Independent Research Project(Grant No.SKLGP2020Z005).
文摘Geomorphological features are commonly used to identify potential landslides.Nevertheless,overemphasis on these features could lead to misjudgment.This research proposes a process-oriented approach for potential landslide identification that considers time-dependent behaviors.The method integrates comprehensive remote sensing and geological analysis to qualitatively assess slope stability,and employs numerical analysis to quantitatively calculate aging stability.Specifically,a time-dependent stability calculation method for anticlinal slopes is developed and implemented in discrete element software,incorporating time-dependent mechanical and strength reduction calculations.By considering the time-dependent evolution of slopes,this method highlights the importance of both geomorphological features and time-dependent behaviors in landslide identification.This method has been applied to the Jiarishan slope(JRS)on the Qinghai-Tibet Plateau as a case study.The results show that the JRS,despite having landslide geomorphology,is a stable slope,highlighting the risk of misjudgment when relying solely on geomorphological features.This work provides insights into the geomorphological characterization and evolution history of the JRS and offers valuable guidance for studying slopes with similar landslide geomorphology.Furthermore,the process-oriented method incorporating timedependent evolution provides a means to evaluate potential landslides,reducing misjudgment due to excessive reliance on geomorphological features.
基金central Yunnan Province(1:50,000)Chuxiong City,central Yunnan Province(Grant/Award Numbers:DD20220987)the National Natural Science Foundation of China(Grant/Award Numbers:41972118).
文摘The Longchuan River basin lies within the China Sichuan-Yunnan rhomboid block.The NS-trending Yuanmou-Lvzhi River Fault(YLF),NW-trending Chuxiong-Nanhua Fault(CNF)and Shiyang-Huoshaotun Fault(HSF)are found within the basin.The nature of the faults is complex,and the tectonic activity distribution characteristics require further clarification.By extraction from a digital elevation model,the measured longitudinal profile and the geomorphic indices of the Longchuan River,basin showed a stream-length gradient index(SL)of 49–650,hypsometric integral(HI)of 0.27–0.58,drainage basin asymmetry factor(AF)of 3.29–27.47,basin shape index(BS)of 0.87–2.75,valley floor width-to-height ratio(VF)of 0.06–5.40,and evaluation of relative tectonic activity(Iat)of 1.6–2.6.Results showed that river morphology and geomorphological indices in the Longchuan River basin were influenced by tectonic activity,bedrock lithology,climatic conditions,and development time,with tectonic activity playing a dominant role.The relative tectonic activity of the Longchuan River basin was zoned,with a gradual increase in relative tectonic activity from the south to the north.That the slip fault zone primarily controls the tectonic deformation of the Longchuan River basin in central Yunnan and the dynamics of the central Yunnan massif are consistent with the“rigid block lateral extrusion”1model.
基金supported by Grants-in-Aid for Scientific Research of the Japanese Society for the Promotion of Science(JSPS KAKENHI)Grant Number 18H00766(principal investigator:Takashi Nakata)Grant Number 18KK0027(principal investigator:Yasuhiro Kumahara).
文摘The Arun and Tista Rivers,which flow across the Himalayas,are commonly known as antecedent valleys that overcame the rapid uplift of the Higher Himalayan ranges.To clarify whether the idea of antecedent rivers is acceptable,we investigated the geomorphology of the Himalayas between eastern Nepal and Bhutan Himalayas.The southern part of Tibetan Plateau,extending across the Himalayas as tectonically un-deformed glaciated terrain named as'Tibetan Corridor,'does not suggest the regional uplift of the Higher Himalayas.The 8,000-m class mountains of Everest,Makalu,and Kanchenjunga are isolated residual peaks on the glaciated terrain composed of mountain peaks of 4,000–6,000 m high.The Tibetan glaciers commonly beheaded by Himalayan glaciers along the great watershed of the Himalayas suggest the expansion of Himalayan river drainage by glaciation.For the narrow upstream regions of the Arun and Tista Rivers with less precipitation behind the range,it is hard to collect enough water for the power of down-cutting their channels against the uplifting Himalayas.The fission track ages of the Higher Himalayan Crystalline Nappe suggest that the Himalayas attained their present altitude by 11–10 Ma,and the Arun and Tista Rivers formed deep gorges across the Himalayas by headward erosion.
基金funded by the University of Montpellier(IR's PhD fellowship)and the French Centre National d'Etudes Spatiales(access to Pleiades images).
文摘Landform mapping is the initial step of many geomorphological analyses(e.g.assessment of natural hazards and natural resources)and requires vast resources to be applied to wide areas at high-resolution.Among geomorphological objects,we focus on glacial moraine mapping,since it is a task relevant to many fields(e.g.paleoclimate and glacial geomorphology).Here we proposed to exploit the potential of Deep Learning-based approaches to map moraine landforms by exploiting multi-source remote sensing imagery.To this end,we propose the first Deep Learning model to map glacial moraines,namely MorNet.As multi-source remote sensing information,we combine together three different sources:Topographic(Pleiades-derived DSM),Multispectral(Sentinel-2),and SAR(Sentinel-1)data.To cope with such heterogeneous information,the proposed model has a dedicated branch for each input source and,a late fusion mechanism is leveraged to combine them with the aim to provide the final mapping.The performance of the MorNet model is evaluated on several glacier valleys in China in the Himalayan range.This area contains minimally eroded moraines,so they are well-defined and of varied morphology.The behavior of the proposed method is compared to models using individual mono-source models in order to highlight the benefit to simultaneously leverage multi-source information.The use of multi-source data allows MorNet to exploit the complementarity of the three input sources and improve its performance from an f1-score of about 41.6 using a single source to 52.8 using three sources.MorNet provides a first-order moraine map through its ability to identify well-defined moraines.Consequently,MorNet can identify areas likely to contain moraines and intends to be used as a tool by experts to facilitate and support large-scale mapping.
基金Foundation： Key Project of the National Natural Science Foundation of China, No.40871177 No.40830529
文摘Geomorphologic maps are one of the most fundamental materials of the natural environment. They have been widely used in scientific research,resource exploration and extraction,education and military affairs etc. An editorial committee was established in 2001 to collect materials for researching and compiling a set of new 1：1,000,000 geomorphologic atlas of China. A digital geomorphologic database was created with visual interpretation from Landsat TM/ETM imageries and SRTM-DEM etc. The atlas compiled from the database was finished. The main characteristics of the atlas are as follows：Firstly,Landsat TM/ETM imageries,published geomorphologic maps or sketches,geographical base maps,digital geological maps,and other thematic maps were collected,which were uniformly geometrically rectified,clipped into uniform sheets,and stored in the foundation database. Secondly,based on the legends of 15 sheets 1：1,000,000 maps published in the 1980s,a geomorphologic classification system was built by combining morphology and genesis types. The system comprised seven hierarchical layers：basic morphology,genesis,sub-genesis,morphology,micro-morphology,slope and aspect,material composition and lithology. These layers were stored in the database during visual image interpretation. About 2000 kinds of morpho-genesis and 300 kinds of morpho-structure were interpreted. Thirdly,the legend system was built,which included color,symbol bases and note bases etc.,compilation standards and procedures were developed,74 sheets of 1：1,000,000 covering all land and sea territories of China were compiled,the 1：1,000,000 geomorphologic atlas of the People＇s Republic of China was finished and published. The atlas will fill the blanks in national basic scale thematic maps,and the geomorphologic database could be applied widely in many fields in the future.
基金National Natural Science Foundation of China,No.41590845,No.41421001,No.41571388。
文摘Geomorphological regionalization(geomor-region)and geomorphological type(geomor-type)classification are two core components in the geomorphologic research.Although remarkable achievements have been made in the study of geomor-region,many deficiencies still exist,such as the inconsistency of landform indicators,the small quantity of division orders,disparities of geomorphological characteristics,differences of mapping results,and the small scale of zoning maps.Requirements for improved national geomor-regions are therefore needed for the purpose of an enhanced national geo-information system.Based on theories of geomor-region in China including plate tectonics,crustal features,endogenic and exogenic forced geomorphological features,and regional differentiations of geomor-type,a three-order(major-region,sub-region,and small-region)research program on China’s geomor-regions is proposed on the basis of previous 2013 geomor-region system.The major contents of the new geomor-region scheme are:(1)principles of the national multi-order geomor-regions;(2)hierarchical indicator systems of geomor-regions including characteristics of the terrain ladder under the control of tectonic setting,combinations of regional macro-form types,combinations of endogenic and exogenic forces and basic types of morphology,combinations of regional morphological types,and combinations of regional micro-morphological types;(3)naming rules and coding methods of geomor-regions;and(4)precise positioning techniques and methods of multi-order geomor-region divisions based on multi-source data.Using the new geomor-region theory and division methodology,the partition of national three-order geomor-regions of China was successfully constructed.The geomor-region system divided China into six first-order major-regions,36 second-order sub-regions,and 136 third-order small-regions.In addition,a database and management information system of the national geomor-regions were established.This research has an important guiding significance for promoting the development of China’s regional geomorphology and for practical applications based on geomor-regions.
基金supported by the National Natural Science Foundation of China(Grant No.41671004)
文摘There are several basins with high sediment yield in the Pisha-sandstone covering area of the east wing of the Ordos Plateau. Due to the lack of targeted research on the dynamical characteristics of geomorphic evolution that plays an important role in the sand production, this paper analyzed the tectonic activity intensity and erosion characteristics of the area. The results show that the intensity of tectonic activities in the area is generally moderateweak and shows an unconspicuous increase from north to south. Tectonic activity is manifested mainly in the form of uplift. The uplift rate in the lower reaches of each basin is greater than the erosion rate,which is prominent in the Kuyehe and the Tuweihe rivers. During the uplift of the regional topography,the most serious parts under erosion are generally concentrated in the upstream and midstream of basins. All longitudinal profiles of the basins have a shape close to an exponential function, which indicates that they are in the early stage of erosion evolution. The mechanisms of geomorphologic evolution of these basins have a great similarity. The conservative estimate of historical average erosion rate was less than 182–520 t/(km^2·yr), much less than that of the modern times. The average stream power values are typically distributed between 4 and102 W/m, with the larger being in the Kuyehe and the Tuweihe rivers and the smallest being in the Qinshuihe River. The maximum stream power value appears in the downstream reach, which should be the main reason for the particles being directly injected into the Yellow River. From the perspective of geomorphological evolution, the current soil and water conservation measures can hardly cure the erosion of these basins in the long run.
文摘Deep-seated catastrophic landslides,particularly rock or debris avalanches,travel extremely rapidly for long distances,causing severe damage over wide areas.This paper summarizes the geological and geomorphological features of such events,which were induced by earthquakes and rainstorms in Asia,and then uses these features to predict future potential sites of failures.Most of the rock avalanches are preceded by gravitational slope deformation with topographic features,in which small scarps along future head of landslide are the most representative;the scarps can be identified in topographic images made by highresolution airborne LiDAR DEMs and may suggest the instability just before catastrophic failure.
基金National Natural Science Foundation of China,No.41421001,No.41590845,No.41571388National Key Basic Research Program,No.2015CB954101
文摘Landforms are an important factor determining the spatial pattern of cropland through allocation of surface water and heat. Therefore, it is of great importance to study the change in cropland distribution from the perspective of geomorphologic divisions. Based on China's multi-year land cover data(1990, 1995, 2000, 2005, 2010 and 2015) and geomorphologic regionalization data, we analyzed the change in cropland area and its distribution pattern in six geomorphologic regions of China over the period of 1990-2015 with the aid of GIS techniques. Our results showed that the total cropland area increased from 177.1 to 178.5 million ha with an average increase rate of 0.03%. Cropland area decreased in southern China and increased in northern China. Region I(Eastern hilly plains) had the highest cropland increase rate, while the cropland dynamic degree of Region IV(Northwestern middle and high mountains, basins and plateaus) was significantly higher than that of other regions. The barycenter of China's cropland shifted from northern China to the northwest over the 25-year period. Regions IV and I were the two regions with the greatest increase of cropland. Region II(Southeastern low and middle mountains) and Region V(Southwestern middle and low mountains, plateaus and basins) were the main decreasing cropland regions. The area of cropland remained almost unchanged in Region III(Northern China and Inner Mongolia eastern-central mountains and plateaus) and Region VI(Tibetan Plateau). The loss of cropland occurred mostly in Regions I and II as a result of growing industrialization and urbanization, while the increase of cropland occurred mainly in Region IV because of reclamation of grassland and other wasteland. These analyzing results would provide fundamental information for further studies of urban planning, ecosystem management, and natural resourcesconservation in China.
基金The National Natural Science Foundation of China under contract No.41030856the Marine Specific Welfare Project of China under contract No.200905008-4the Project of Taishan Scholar
文摘Eight representative beach profiles on the eastern coast of the Shandong Peninsula are observed and measured in 2011 and 2012 to determine the coastal processes under the lower tropical wind speed condition and the beach response to and recovery from the tropical storm Meari in a rare typhoon region. The results show that it is the enhancement and directional change of cross-shore and longshore sediment transports caused by Meari that leads to the beach morphological changes, and most of the sediment transports occur during the pre-Meari landing phase. The erosional scarp formation and the berm or beach face erosion are the main geomorphological responses of the beaches to the storm. The storm characteristics are more important than the beach shapes in the storm response process of the beaches on Shandong Peninsula. The typhoon is a fortuitous strong dynamic event, and the effect on the dissipative beach is more obvious than it is on the reflective beach in the study region. Furthermore, the beach trend is the main factor that controlls the storm effect intensity, and it is also closely related to the recovery of the beach profiles.
文摘Coastline configuration indexes of 34 typical arc-shaped coasts in South China are investigated by the method of principal component analysis, and meanwhile deposition and geomorphologic features of arc-shaped coast are also analyzed. The results show: (1) The configuration of arc-shaped coast in South China is of the characteristic of variability and complexity. (2) The wave power and the openings of the bay are the decisive factors to result in the changes of the configuration of the arc-shaped coast in South China, however, incidence direction of the wave has no effect on configuration development of the coast. (3) Commonly, geomorphologic modes of the arc-shaped coast system in South China consist of barriers, lagoons and tidal-inlets, and can be divided into four types:the openings of the bay leaning to the east, the openings of the bay leaning to the south, the openings of the bay leaning to the west and the openings of the bay leaning to the north.
基金supported by the strategic plan project of science and technology of Institute of Geographic Sciences and Natural Resources Research (Grant No. 2012ZD009)the National Science Technology Support Plan Project (Grant No. 2012BAH28B01-03)+1 种基金the National Natural Science Foundation of China (Grant No. 41171332)the National Science Technology Basic Special Project (Grant No.2011FY110400-2)
文摘Based on geomorphologic and digital elevation model(DEM) data, the topographic characteristics of the northwestern edge of the Qinghai-Tibet Plateau are analyzed. Five representative peaks are first determined according to the topographic profile maps for the ridge and piedmont lines, and then the topographic gradient characteristics are analyzed according to the representative topographic profile acquisition method.Based on the geomorphologic database data, the regions between the ridge and the piedmont lines are divided into four geomorphologic zones; and the topographic characteristics are finally analyzed for the different geomorphologic zones regions using the DEM data. The research results show that from the piedmont to the ridge, there exist four geomorphologic zones: arid, fluvial, periglacial and glacial. The arid has the lowest elevation, topographic gradient, relief and slope characteristics. The fluvial has lower elevation and the highest topographic gradient, but with lower relief and slope characteristics. With higher elevation, the periglcial has lower topographic gradient, but the highest relief and slope characteristics. The glacial has the highest elevation with higher topographic gradient, relief and slope characteristics.
基金Natural Science Foundation of Xi＇an Jiaotong University and China Scholarship Council postgraduate scholarship program Acknowledgements The authors wish to thank Professor Bruce Mithchell, Vice President of University of Waterloo, for improving the manuscript greatly.
文摘The geomorphological environment is one of the most fundamental variables affecting the development of human society. The mission of geomorphological environment research is to explore the most basic environment and features of our Earth＇s surface morphology. The results can be applied to resource evaluation, environmental protection and reducing and preventing geological disasters. Thus, it can serve to help achieve sustainable development. This paper examines the Shenzhen east coastal zone as a case strongly influenced by urban expansion. We use modern geomorphological theory and methods, along with GIS and RS techniques, to reveal key characteristics of the geomorphological environment and landform classification. Furthermore, coastal ecosystem evaluation and regional resources sustainable utilization should be considered relative to the corresponding geomorphological environment. Based on this study, we conclude that modern geomorphological theory and methods, supported by ＂3S＂ techniques including GIS, RS and GPS, can play an important role in resolving the environment, resources and population problems as well as sustainable development challenges facing humankind at present.
基金support for this work:National Natural Science Foundation of China(Grant Nos.41877525,61971037 and 31727901)Chongqing Key Laboratory of Geological Environment Monitoring and Disaster Early-warning in Three Gorges Reservoir Area(No.MP2020B0301)。
文摘Soil thickness,intended as depth to bedrock,is a key input parameter for many environmental models.Nevertheless,it is often difficult to obtain a reliable spatially exhaustive soil thickness map in widearea applications,and existing prediction models have been extensively applied only to test sites with shallow soil depths.This study addresses this limitation by showing the results of an application to a section of Wanzhou County(Three Gorges Reservoir Area,China),where soil thickness varies from 0 to40 m.Two different approaches were used to derive soil thickness maps:a modified version of the geomorphologically indexed soil thickness(GIST)model,purposely customized to better account for the peculiar setting of the test site,and a regression performed with a machine learning algorithm,i.e.,the random forest,combined with the geomorphological parameters of GIST(GIST-RF).Additionally,the errors of the two models were quantified,and validation with geophysical data was carried out.The results showed that the GIST model could not fully contend with the high spatial variability of soil thickness in the study area:the mean absolute error was 10.68 m with the root-mean-square error(RMSE)of 12.61 m,and the frequency distribution residuals showed a tendency toward underestimation.In contrast,GIST-RF returned a better performance with the mean absolute error of 3.52 m and RMSE of 4.56 m.The derived soil thickness map could be considered a critical fundamental input parameter for further analyses.
基金This paper is funded by the National Special Program of China Geological Survey(DD20191002,DD20191003)。
文摘The Philippine Sea is the largest marginal sea in the Western Pacific Ocean and is divided into two parts by the Kyushu-Palau Ridge(KPR).The western part is the West Philippine Basin,and the eastern part consists of the Shikoku and Parece Vela basins.Based on surveyed data of massive high-resolution multibeam bathymetric data and sub-bottom profiles data collected from the southern section of the KPR from 2018 to 2021,this paper analyzes the topographic and geomorphological features,shallow sedimentary features,and tectonic genesis of the southern section of the KPR,obtaining the following conclusions.The southern section of the KPR has complex and rugged topography,with positive and negative topography alternatingly distributed and a maximum height difference of 4086 m.The slope of seamounts in this section generally exceeds 10°and is up to a maximum of 59°.All these contribute noticeably discontinuous topography.There are primarily nine geomorphological types in the southern section of the KPR,including seamounts,ridges,and intermontane valleys,etc.Among them,seven independent seamount groups are divided by five large troughs,forming an overall geomorphological pattern of seven abyssal seamount groups and five troughs.This reflects the geomorphological features of a deep oceanic ridge.Intramontane basins and intermontane valleys in the southern section of the KPR are covered by evenly thick sediments.In contrast,sediments in ridges and seamounts in this section are thin or even missing,with slumps developing locally.Therefore,the sediments are discontinuous and unevenly developed.The KPR formed under the control of tectonism such as volcanic activities and plate movements.In addition,exogenic forces such as underflow scouring and sedimentation also play a certain role in shaping seafloor landforms in the KPR.
基金supported by China National Funds for Distinguished Young Scientists(Grant No.52025092)the Fundamental Research Funds for the Central Universities(Grant No.JB2022059)。
文摘Rapid change of climate in vertical and considerable geomorphologic features form a typical diversity and distribution of biota in mountain ecosystems,i.e.,the subalpine forest zone(SFZ),the valley savanna zone(VSZ),and the transition zone between them.The arid hot valley in the middle and lower reaches of Jinsha River,China represents a well target area to study distribution and the driving factors in these typical mountain ecosystems.Therefore,this study selects four sub-sample areas in the arid-hot valley to explore the distinctive changes of vegetation during 1990 to 2020,and their driving factors in the three different vegetation zones on spatiotemporal scales.On the spatial scale,the Moran’s index was applied to identify the transition zone between the SFZ and the VSZ.Results show that the VSZ at low altitudes(less than 600-1000 m from the valley bottom)is mainly affected by geomorphologic features,especially the slope aspect.With increase in altitude,the climate factors(e.g.,humidity,temperature,etc.)play a more significant role in the development of the SFZ,while the effect of geomorphologic features gradually weakens.On the time scale,The SFZ at higher altitudes experienced more rapid changes in temperature(temperature increase of 1.41°C over the last 60 years)than the VSZ at lower altitudes(temperature increase of 0.172°C over the past 60 years).It caused the forest cover increase faster than that of savanna grassland.Humidity and heat conditions are altered by topography and climate conditions,which shapes the development and physiology of plants as they adapt to the different climatic zones.Furthermore,according to the driving factors(geomorphologic and climate factors)of vegetation distribution found in this study,it suggests that suitable tree species should be planted in the transition zone to evolve into the forest zone and making the forest zone to recover from high to low altitudes gradually.
基金funding from the Ministry of Science and Technology of the People’s Republic of China (2013CB956000)the National Natural Science Foundation of China (41130533)
文摘Dune networks are widely distributed in the world＇s deserts,which include primary ridges and secondary ridges.However,they have not been sufficiently studied in a systematic manner and their origins and spatial and morphological characteristics remain unclear.To provide information on the geomorphology of dune networks,we analyze the software geomorphologic patterns of the dune networks in China＇s Tengger Desert using matrix and laboratory to process remote-sensing images.Based on analysis of image features and their layout in a topographic map,we identify two types of dune networks （square and rectangular dune networks） with different size and morphological structures in the Tengger Desert.Four important geomorphic pattern parameters,ridge length,spacing,orientation and defect density,are analyzed.The length of primary ridges of dune networks decreases from northwest of the desert to the southeast,resulting an increasing spacing and a transition from rectangular dune networks to square dune networks.Wind regime and sediment supply are responsible for the variation in pattern parameters.We use the spacing and defect density data to estimate the construction time of dune networks and found that the dune networks in the Tengger Desert formed since about 1.3 ka BP.
基金supported by the Key Research Program of the Chinese Academy of Sciences(Grant No.ZDBS-SSW-TLC001)the National Natural Science Foundation(Grant No.11803056).
文摘China’s first Mars exploration mission,Tianwen-1,successfully landed in southern Utopia Planitia on Mars on May 15,2021.This work presents a detailed investigation of the geologic context of the landing area surface for this mission based on orbital remotesensing data.We constructed a geomorphologic map for the Tianwen-1 landing area.Results of our detailed geomorphologic map show several major landforms within the landing area,including rampart craters,mesas,troughs,cones,and ridges.Analysis of materials on the landing area surface indicates that most of the landing area is covered by Martian dust.Transverse aeolian ridges are widely distributed within the landing area,indicating the surface contexts were(and still are)modified by regional winds.In addition,a crater counting analysis indicates the landing area has an absolute model age of~3.3 Ga and that a later resurfacing event occurred at~1.6 Ga.Finally,we outline four formational scenarios to test the formation mechanisms for the geomorphologic features on the landing area surface.The most likely interpretation to explain the existence of the observed surface features can be summarized as follows:A thermal influence may have played an important role in the formation of the surface geomorphologic features;thus,igneous-related processes may have occurred in the landing area.Water ice may also have been involved in the construction of the primordial surface configuration.Subsequent resurfacing events and aeolian processes buried and modified the primordial surface.
基金supported by the Basic Scientific Research Special Fund from Institute of Earthquake Science, China Earthquake Administration (02092403 and 0207690224)
文摘Digital elevation model （DEM） can be generated by interferometric synthetic aperture radar （InSAR）. In this paper, the interferometric processing and analyses are carried out for Damxung-Yangbajain area in Tibet, using a pair of Europe remote-sensing satellite （ERS）-1/2 tandem SAR images acquired on 6 and 7 April 1996. A portion of the In- SAR-derived DEM is selected and compared with the 1：50 000 DEM to determine the precision of the InSAR-derived DEM. The comparison indicates that the root mean squared errors （RMSE）, which are used to evaluate error, are about 35, 60, 10, and 15 m in the studied area, mountainous area, basin area and near-fault area, respectively, suggesting that obvious errors are mainly in mountainous area. Besides, the limitation of InSAR technology to generate DEM is analyzed. Our investigation shows that InSAR is an effective tool in geodesy and an important complement to field surveying in some dangerous areas.
