Mass attenuation coefficients, effective atomic numbers, effective electron densities and Kerma relative to air for adipose, muscle and bone tissues have been investigated in the photon energy region from 20 keV up to...Mass attenuation coefficients, effective atomic numbers, effective electron densities and Kerma relative to air for adipose, muscle and bone tissues have been investigated in the photon energy region from 20 keV up to 50 MeV with Geant4 simulation package and theoretical calculations. Based on Geant4 results of the mass attenuation coefficients, the effective atomic numbers for the tissue models have been calculated. The calculation results have been compared with the values of the Auto-Zeff program and with other studies available in the literature. Moreover, Kerma of studied tissues relative to air has been determined and found to be dependent on the absorption edges of the tissue constituent elements.展开更多
In various monitoring and detection tools that use pulsed neutron generators as radiation sources,the gamma rays induced by the interaction with various nuclei at different stages of neutron transport can reflect info...In various monitoring and detection tools that use pulsed neutron generators as radiation sources,the gamma rays induced by the interaction with various nuclei at different stages of neutron transport can reflect information about the medium.These gamma rays are generated in two major interactions:inelastic scattering of fast neutrons and radiative capture of thermal neutrons,corresponding to the inelastic and capture gamma rays,respectively.However,the two types of gamma rays that reflect different properties of the medium are difficult to collect by normal detectors independently.The proportion of the two gamma rays needs to be solved for the separation of inelastic and capture gamma.Therefore,this study proposes an optimized spectra decomposition method to calculate the inelastic-to-capture ratio in the measured total gamma spectra based on the net inelastic and capture spectra obtained using the Geant4 simulation.Because the simulated data cannot reflect the energy resolution of the measured spectra,we introduce the Gaussian broadening function of the gamma detector while calculating the proportion of the spectra components,and achieve optimization of the proportion values and resolution parameters simultaneously.Based on the results,the total simulated spectra obtained by superimposing the broadened net inelastic and capture gamma spectra according to the calculated inelastic-to-capture ratio are in good agreement with their measured counterpart.展开更多
The low-energy muon facility at PSI provides nearly fully polarized positive muons with tunable energies in the ke V range to carry out muon spin rotation(LE-μSR)experiments with nanometer depth resolution on thin fi...The low-energy muon facility at PSI provides nearly fully polarized positive muons with tunable energies in the ke V range to carry out muon spin rotation(LE-μSR)experiments with nanometer depth resolution on thin films,heterostructures, and near-surface regions. The low-energy muon beam is focused and transported to the sample by electrostatic lenses. In order to achieve a minimum beam spot size at the sample position and to enable the steering of the beam in the horizontal and vertical direction, a special electrostatic device has been implemented close to the sample position. It consists of a cylinder at ground potential followed by four conically shaped electrodes,which can be operated at different electric potential. In LE-μSR experiments, an electric field at the sample along the beam direction can be applied to accelerate/decelerate muons to different energies(0.5–30 keV). Additionally, a horizontal or vertical magnetic field can be superimposed for transverse or longitudinal field μSR experiments. The focusing properties of the conical lens in the presence of these additional electric and magnetic fields have been investigated and optimized by Geant4 simulations. Some experimental tests were also performed and show that the simulation well describes the experimental setup.展开更多
This paper is aimed at detecting the neutron spectrum of^(241)Am–Be, a widely used neutron source, with the SP9 ~3He proportional counter, which is a multi-sphere spectrometer system of eight thermal neutron detector...This paper is aimed at detecting the neutron spectrum of^(241)Am–Be, a widely used neutron source, with the SP9 ~3He proportional counter, which is a multi-sphere spectrometer system of eight thermal neutron detectors embedded in eight polyethylene(PE) spheres of varying diameters. The transport processes of a neutron in the multi-sphere spectrometer are simulated using the Geant4 code. Two sets of response functions of the PE spheres are obtained for calculating the^(241)Am–Be neutron spectrum.Response Function 1 utilizes the thermal neutron scattering model G4 Neutron HPThermal Scattering for neutron energies of ≤4 eV, and Response Function 2 has no thermal treatment. Neutron spectra of an^(241)Am–Be neutron source are measured and compared to those calculated by using the response functions. The results show that response function with thermal treatment is more accurate and closer to the real spectrum.展开更多
Geant4 Monte Carlo simulation results of the single event upset(SEU)induced by protons with energy ranging from 0.3 MeV to 1 GeV are reported.The SEU cross section for planar and three-dimensional(3D)die-stacked SRAM ...Geant4 Monte Carlo simulation results of the single event upset(SEU)induced by protons with energy ranging from 0.3 MeV to 1 GeV are reported.The SEU cross section for planar and three-dimensional(3D)die-stacked SRAM are calculated.The results show that the SEU cross sections of the planar device and the 3D device are different from each other under low energy proton direct ionization mechanism,but almost the same for the high energy proton.Besides,the multi-bit upset(MBU)ratio and pattern are presented and analyzed.The results indicate that the MBU ratio of the 3D die-stacked device is higher than that of the planar device,and the MBU patterns are more complicated.Finally,the on-orbit upset rate for the 3D die-stacked device and the planar device are calculated by SPACE RADIATION software.The calculation results indicate that no matter what the orbital parameters and shielding conditions are,the on-orbit upset rate of planar device is higher than that of 3D die-stacked device.展开更多
The DArk Matter Particle Explorer(DAMPE)is a satellite-borne detector for high-energy cosmic rays and y-rays.To fully understand the detector performance and obtain reliable physical results,extensive simulations of t...The DArk Matter Particle Explorer(DAMPE)is a satellite-borne detector for high-energy cosmic rays and y-rays.To fully understand the detector performance and obtain reliable physical results,extensive simulations of the detector are necessary.The simulations are particularly important for the data analysis of cosmic ray nuclei,which relies closely on the hadronic and nuclear interactions of particles in the detector material.Widely adopted simulation softwares include the GEANT4 and FLUKA,both of which have been implemented for the DAMPE simulation tool.Here we describe the simulation tool of DAMPE and compare the results of proton shower properties in the calorimeter from the two simulation softwares.Such a comparison gives an estimate of the most significant uncertainties of our proton spectral analysis.展开更多
The experimental muon source on China Spallation Neutron Source(CSNS) is expected to be a high intensity(105μ+/s) surface muon source with a small beam spot of 4-cm diameter.For a practical application of this muon s...The experimental muon source on China Spallation Neutron Source(CSNS) is expected to be a high intensity(105μ+/s) surface muon source with a small beam spot of 4-cm diameter.For a practical application of this muon source,we are devoting to develop the first pulsed μSR spectrometer in China.In this paper,the performance of plastic scintillators in the μSR spectrometer is studied by Monte Carlo simulation.The processes such as positron energy deposition,scintillation photons production,light propagation and photon-electron conversion are carefully considered.According to the results,an optimal dimension of the plastic scintillator is proposed using for our future spectrometer,which has a long-strip shape with the dimension variation range of 50–60 mm length,5–8 mm height,and 10–12 mm width.Finally,we can build a spectrometer with a count rate up to 104e+/s by 100–120 forward and backward segmental detectors in total.The simulation could serve as an important guide for spectrometer construction.展开更多
To further research on high-parameter plasma,we plan to develop a two-dimensional hard X-ray(HXR)imaging system at the HL-3 tokamak to measure HXRs with energies ranging from 20 to 300 keV.The application of an array-...To further research on high-parameter plasma,we plan to develop a two-dimensional hard X-ray(HXR)imaging system at the HL-3 tokamak to measure HXRs with energies ranging from 20 to 300 keV.The application of an array-structured detector ensures that this system can measure HXR-radiation spectra from the entire plasma cross section.Therefore,it is suitable for the study of fast-electron physics,such as radio-frequency wave current drives,fast electrons driving instabilities,and plasma disruptions in fusion research.In this study,we develop a simulation for calculating fast-electron bremsstrahlung in the HL-3 tokamak based on the Monte Carlo simulation code Geant4,in which the plasma geometry and forward scattering of fast-electron bremsstrahlung are considered.The preliminary calculation results indicate that the HXR energy deposi-tion on the detector is symmetrically distributed,even though the plasma distribution is asymmetric owing to the toroidal effect.These simulation results are helpful in constructing the relationship between the energy deposition on the detector and parameter distribution on the plasma cross section during HL-3 experiments.This is beneficial for the reconstruction of the fast-electron-distribution function and for optimizing the design of the HXR-imaging system.展开更多
For more than 20 years nuclear physicists have used the GEANT code to simulate particle-matter interaction. In most recent version, GEANT4 is a toolkit for simulating the passage of particles though matter, which cont...For more than 20 years nuclear physicists have used the GEANT code to simulate particle-matter interaction. In most recent version, GEANT4 is a toolkit for simulating the passage of particles though matter, which contains a complete range of functionality including tracking, geometry, physics models, and hits. In this article, an attempt to use GEANT4 to model a double-gap resistive plate chamber （RPC） with its improved efficiency is presented. The efficiencies of the double-gap RPC have been evaluated as a function of gamma energy range 0.005-1000MeV. A comparison to available previous simulation package GEANT3 data is also performed.展开更多
The characteristic gamma-ray spectrum of TNT in the soil induced by DT neutrons is measured by the PFTNA demining system. The GEANT4 toolkit is used to simulate the whole experimental procedure. The simulated spectra ...The characteristic gamma-ray spectrum of TNT in the soil induced by DT neutrons is measured by the PFTNA demining system. The GEANT4 toolkit is used to simulate the whole experimental procedure. The simulated spectra are compared with the experimental spectra, and they are mainly consistent. The share of the background sources such as neutrons and gamma is obtained and the contribution that the experimental apparatus to the background, such as shielding, detector sleeve and moderator, is analyzed. The effective gamma signal(from soil and TNT) is 29% of the full spectrum signal, and the background signal, more than 68%, this is mainly produced by shielding and the detector sleeve. By gradually optimizing the shielding and the cadmium sheet of the detector sleeve, the share of the effective gamma signal increases to 47%, and the background signal reduces to 18%.展开更多
For the proper interpretation of the experimental data produced in slow positron beam technique, the positron implantation properties are studied carefully using the latest Geant4 code. The simulated backscattering co...For the proper interpretation of the experimental data produced in slow positron beam technique, the positron implantation properties are studied carefully using the latest Geant4 code. The simulated backscattering coefficients, the implantation profiles, and the median implantation depths for mono-energetic positrons with energy range from 1 keV to 50 keV normally incident on different crystals are reported. Compared with the previous experimental results, our simulation backscattering coefficients are in reasonable agreement, and we think that the accuracy may be related to the structures of the host materials in the Geant4 code. Based on the reasonable simulated backscattering coefficients, the adjustable parameters of the implantation profiles which are dependent on materials and implantation energies are obtained. The most important point is that we calculate the positron backscattering coefficients and median implantation depths in amorphous polymers for the first time and our simulations are in fairly good agreement with the previous experimental results.展开更多
Three-dimensional integrated circuits(3D ICs)have entered into the mainstream due to their high performance,high integration,and low power consumption.When used in atmospheric environments,3D ICs are irradiated inevit...Three-dimensional integrated circuits(3D ICs)have entered into the mainstream due to their high performance,high integration,and low power consumption.When used in atmospheric environments,3D ICs are irradiated inevitably by neutrons.In this paper,a 3D die-stacked SRAM device is constructed based on a real planar SRAM device.Then,the single event upsets(SEUs)caused by neutrons with different energies are studied by the Monte Carlo method.The SEU cross-sections for each die and for the whole three-layer die-stacked SRAM device is obtained for neutrons with energy ranging from 1 MeV to 1000 MeV.The results indicate that the variation trend of the SEU cross-section for every single die and for the entire die-stacked device is consistent,but the specific values are different.The SEU cross-section is shown to be dependent on the threshold of linear energy transfer(LETth)and thickness of the sensitive volume(Tsv).The secondary particle distribution and energy deposition are analyzed,and the internal mechanism that is responsible for this difference is illustrated.Besides,the ratio and patterns of multiple bit upset(MBU)caused by neutrons with different energies are also presented.This work is helpful for the aerospace IC designers to understand the SEU mechanism of 3D ICs caused by neutrons irradiation.展开更多
Knowledge of actinides(n,f) fission process induced by neutron is of importance in the field of nuclear power and nuclear engineering,especially for reactor applications.In this work,fission characteristics of^(238)U(...Knowledge of actinides(n,f) fission process induced by neutron is of importance in the field of nuclear power and nuclear engineering,especially for reactor applications.In this work,fission characteristics of^(238)U(n,f) reaction induced by D-T neutron source were simulated with Geant4 code from multiple perspectives,including the fission production yields,total nubar,kinetic energy distribution,fission neutron spectrum and cumulative γ-ray spectrum of the fission products.The simulation results agree well with the experimental nuclear reaction data(EXFOR) and evaluated nuclear data(ENDF).Mainly,this work was to examine the rationality of the parametric nuclear fission model in Geant4 and to direct our future experimental measurements for the cumulative fission yields of ^(238)U(n,f) reaction.展开更多
Type I X-ray bursts are the most frequent thermonuclear explosions in nature,resulting from thermonuclear runaway on the surface of an accreting neutron star[1].The breakout reaction 14O(α ,p)17F from the hot CNO cyc...Type I X-ray bursts are the most frequent thermonuclear explosions in nature,resulting from thermonuclear runaway on the surface of an accreting neutron star[1].The breakout reaction 14O(α ,p)17F from the hot CNO cycle may have a prominent impact on the burst light curve and burst ashes[2].However,insufficient experimental information is available to calculate a reliable,precise rate for this reaction[3].We proposed to address the experimental investigation of the 14O(α,p)17F using Time Projection Chamber(TPC)[4].展开更多
Because of the challenge of compounding lightweight,high-strength Ti/Al alloys due to their considerable disparity in properties,Al 6063 as intermediate layer was proposed to fabricate TC4/Al 6063/Al 7075 three-layer ...Because of the challenge of compounding lightweight,high-strength Ti/Al alloys due to their considerable disparity in properties,Al 6063 as intermediate layer was proposed to fabricate TC4/Al 6063/Al 7075 three-layer composite plate by explosive welding.The microscopic properties of each bonding interface were elucidated through field emission scanning electron microscope and electron backscattered diffraction(EBSD).A methodology combining finite element method-smoothed particle hydrodynamics(FEM-SPH)and molecular dynamics(MD)was proposed for the analysis of the forming and evolution characteristics of explosive welding interfaces at multi-scale.The results demonstrate that the bonding interface morphologies of TC4/Al 6063 and Al 6063/Al 7075 exhibit a flat and wavy configuration,without discernible defects or cracks.The phenomenon of grain refinement is observed in the vicinity of the two bonding interfaces.Furthermore,the degree of plastic deformation of TC4 and Al 7075 is more pronounced than that of Al 6063 in the intermediate layer.The interface morphology characteristics obtained by FEM-SPH simulation exhibit a high degree of similarity to the experimental results.MD simulations reveal that the diffusion of interfacial elements predominantly occurs during the unloading phase,and the simulated thickness of interfacial diffusion aligns well with experimental outcomes.The introduction of intermediate layer in the explosive welding process can effectively produce high-quality titanium/aluminum alloy composite plates.Furthermore,this approach offers a multi-scale simulation strategy for the study of explosive welding bonding interfaces.展开更多
文摘Mass attenuation coefficients, effective atomic numbers, effective electron densities and Kerma relative to air for adipose, muscle and bone tissues have been investigated in the photon energy region from 20 keV up to 50 MeV with Geant4 simulation package and theoretical calculations. Based on Geant4 results of the mass attenuation coefficients, the effective atomic numbers for the tissue models have been calculated. The calculation results have been compared with the values of the Auto-Zeff program and with other studies available in the literature. Moreover, Kerma of studied tissues relative to air has been determined and found to be dependent on the absorption edges of the tissue constituent elements.
基金supported by the China Natural Science Fund(No.52171253)the Natural Science Foundation of Sichuan(No.2022NSFSC0949).
文摘In various monitoring and detection tools that use pulsed neutron generators as radiation sources,the gamma rays induced by the interaction with various nuclei at different stages of neutron transport can reflect information about the medium.These gamma rays are generated in two major interactions:inelastic scattering of fast neutrons and radiative capture of thermal neutrons,corresponding to the inelastic and capture gamma rays,respectively.However,the two types of gamma rays that reflect different properties of the medium are difficult to collect by normal detectors independently.The proportion of the two gamma rays needs to be solved for the separation of inelastic and capture gamma.Therefore,this study proposes an optimized spectra decomposition method to calculate the inelastic-to-capture ratio in the measured total gamma spectra based on the net inelastic and capture spectra obtained using the Geant4 simulation.Because the simulated data cannot reflect the energy resolution of the measured spectra,we introduce the Gaussian broadening function of the gamma detector while calculating the proportion of the spectra components,and achieve optimization of the proportion values and resolution parameters simultaneously.Based on the results,the total simulated spectra obtained by superimposing the broadened net inelastic and capture gamma spectra according to the calculated inelastic-to-capture ratio are in good agreement with their measured counterpart.
基金a scholarship from the China Scholarship Council (CSC)financial support from PSI for her stay at PSI
文摘The low-energy muon facility at PSI provides nearly fully polarized positive muons with tunable energies in the ke V range to carry out muon spin rotation(LE-μSR)experiments with nanometer depth resolution on thin films,heterostructures, and near-surface regions. The low-energy muon beam is focused and transported to the sample by electrostatic lenses. In order to achieve a minimum beam spot size at the sample position and to enable the steering of the beam in the horizontal and vertical direction, a special electrostatic device has been implemented close to the sample position. It consists of a cylinder at ground potential followed by four conically shaped electrodes,which can be operated at different electric potential. In LE-μSR experiments, an electric field at the sample along the beam direction can be applied to accelerate/decelerate muons to different energies(0.5–30 keV). Additionally, a horizontal or vertical magnetic field can be superimposed for transverse or longitudinal field μSR experiments. The focusing properties of the conical lens in the presence of these additional electric and magnetic fields have been investigated and optimized by Geant4 simulations. Some experimental tests were also performed and show that the simulation well describes the experimental setup.
基金supported by ITER Plan National Major Project(No.2008GB109000)the Introduces Talents Scientific Research Project of Guizhou University(2014,No.32)
文摘This paper is aimed at detecting the neutron spectrum of^(241)Am–Be, a widely used neutron source, with the SP9 ~3He proportional counter, which is a multi-sphere spectrometer system of eight thermal neutron detectors embedded in eight polyethylene(PE) spheres of varying diameters. The transport processes of a neutron in the multi-sphere spectrometer are simulated using the Geant4 code. Two sets of response functions of the PE spheres are obtained for calculating the^(241)Am–Be neutron spectrum.Response Function 1 utilizes the thermal neutron scattering model G4 Neutron HPThermal Scattering for neutron energies of ≤4 eV, and Response Function 2 has no thermal treatment. Neutron spectra of an^(241)Am–Be neutron source are measured and compared to those calculated by using the response functions. The results show that response function with thermal treatment is more accurate and closer to the real spectrum.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11690041 and 11675233)the Fund from the Science and Technology on Analog Integrated Circuit Laboratory,China(Grant No.JCKY2019210C054).
文摘Geant4 Monte Carlo simulation results of the single event upset(SEU)induced by protons with energy ranging from 0.3 MeV to 1 GeV are reported.The SEU cross section for planar and three-dimensional(3D)die-stacked SRAM are calculated.The results show that the SEU cross sections of the planar device and the 3D device are different from each other under low energy proton direct ionization mechanism,but almost the same for the high energy proton.Besides,the multi-bit upset(MBU)ratio and pattern are presented and analyzed.The results indicate that the MBU ratio of the 3D die-stacked device is higher than that of the planar device,and the MBU patterns are more complicated.Finally,the on-orbit upset rate for the 3D die-stacked device and the planar device are calculated by SPACE RADIATION software.The calculation results indicate that no matter what the orbital parameters and shielding conditions are,the on-orbit upset rate of planar device is higher than that of 3D die-stacked device.
基金Supported by the National Key Research and Development Program of China(Grant No.2016YFA0400200)the National Natural Science Foundation of China(Grant Nos.11722328,11773085,U1738127,U1738138,U1738205,U1738207,and 11851305)+4 种基金the 100 Talents Program of Chinese Academy of Sciencesthe Youth Innovation Promotion Association CASthe Program for Innovative Talents and Entrepreneur in Jiangsusupported by the Swiss National Science Foundation(SNSF),Switzerlandthe National Institute for Nuclear Physics(INFN),Italy。
文摘The DArk Matter Particle Explorer(DAMPE)is a satellite-borne detector for high-energy cosmic rays and y-rays.To fully understand the detector performance and obtain reliable physical results,extensive simulations of the detector are necessary.The simulations are particularly important for the data analysis of cosmic ray nuclei,which relies closely on the hadronic and nuclear interactions of particles in the detector material.Widely adopted simulation softwares include the GEANT4 and FLUKA,both of which have been implemented for the DAMPE simulation tool.Here we describe the simulation tool of DAMPE and compare the results of proton shower properties in the calorimeter from the two simulation softwares.Such a comparison gives an estimate of the most significant uncertainties of our proton spectral analysis.
基金Supported by National Natural Science Foundation of China(No.11075154)
文摘The experimental muon source on China Spallation Neutron Source(CSNS) is expected to be a high intensity(105μ+/s) surface muon source with a small beam spot of 4-cm diameter.For a practical application of this muon source,we are devoting to develop the first pulsed μSR spectrometer in China.In this paper,the performance of plastic scintillators in the μSR spectrometer is studied by Monte Carlo simulation.The processes such as positron energy deposition,scintillation photons production,light propagation and photon-electron conversion are carefully considered.According to the results,an optimal dimension of the plastic scintillator is proposed using for our future spectrometer,which has a long-strip shape with the dimension variation range of 50–60 mm length,5–8 mm height,and 10–12 mm width.Finally,we can build a spectrometer with a count rate up to 104e+/s by 100–120 forward and backward segmental detectors in total.The simulation could serve as an important guide for spectrometer construction.
基金supported by the National Natural Science Foundation of China(No.12305239)Scientific Research Foundation of Chongqing University of Technology(No.2023ZDZ053)National Key R&D Program of China(No.2019YFE03010001).
文摘To further research on high-parameter plasma,we plan to develop a two-dimensional hard X-ray(HXR)imaging system at the HL-3 tokamak to measure HXRs with energies ranging from 20 to 300 keV.The application of an array-structured detector ensures that this system can measure HXR-radiation spectra from the entire plasma cross section.Therefore,it is suitable for the study of fast-electron physics,such as radio-frequency wave current drives,fast electrons driving instabilities,and plasma disruptions in fusion research.In this study,we develop a simulation for calculating fast-electron bremsstrahlung in the HL-3 tokamak based on the Monte Carlo simulation code Geant4,in which the plasma geometry and forward scattering of fast-electron bremsstrahlung are considered.The preliminary calculation results indicate that the HXR energy deposi-tion on the detector is symmetrically distributed,even though the plasma distribution is asymmetric owing to the toroidal effect.These simulation results are helpful in constructing the relationship between the energy deposition on the detector and parameter distribution on the plasma cross section during HL-3 experiments.This is beneficial for the reconstruction of the fast-electron-distribution function and for optimizing the design of the HXR-imaging system.
文摘For more than 20 years nuclear physicists have used the GEANT code to simulate particle-matter interaction. In most recent version, GEANT4 is a toolkit for simulating the passage of particles though matter, which contains a complete range of functionality including tracking, geometry, physics models, and hits. In this article, an attempt to use GEANT4 to model a double-gap resistive plate chamber （RPC） with its improved efficiency is presented. The efficiencies of the double-gap RPC have been evaluated as a function of gamma energy range 0.005-1000MeV. A comparison to available previous simulation package GEANT3 data is also performed.
文摘The characteristic gamma-ray spectrum of TNT in the soil induced by DT neutrons is measured by the PFTNA demining system. The GEANT4 toolkit is used to simulate the whole experimental procedure. The simulated spectra are compared with the experimental spectra, and they are mainly consistent. The share of the background sources such as neutrons and gamma is obtained and the contribution that the experimental apparatus to the background, such as shielding, detector sleeve and moderator, is analyzed. The effective gamma signal(from soil and TNT) is 29% of the full spectrum signal, and the background signal, more than 68%, this is mainly produced by shielding and the detector sleeve. By gradually optimizing the shielding and the cadmium sheet of the detector sleeve, the share of the effective gamma signal increases to 47%, and the background signal reduces to 18%.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11175171 and 11105139)
文摘For the proper interpretation of the experimental data produced in slow positron beam technique, the positron implantation properties are studied carefully using the latest Geant4 code. The simulated backscattering coefficients, the implantation profiles, and the median implantation depths for mono-energetic positrons with energy range from 1 keV to 50 keV normally incident on different crystals are reported. Compared with the previous experimental results, our simulation backscattering coefficients are in reasonable agreement, and we think that the accuracy may be related to the structures of the host materials in the Geant4 code. Based on the reasonable simulated backscattering coefficients, the adjustable parameters of the implantation profiles which are dependent on materials and implantation energies are obtained. The most important point is that we calculate the positron backscattering coefficients and median implantation depths in amorphous polymers for the first time and our simulations are in fairly good agreement with the previous experimental results.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.12035019,111690041,and 11675233)the Project of Science and Technology on Analog Integrated Circuit Laboratory,China(Grant No.6142802WD201801).
文摘Three-dimensional integrated circuits(3D ICs)have entered into the mainstream due to their high performance,high integration,and low power consumption.When used in atmospheric environments,3D ICs are irradiated inevitably by neutrons.In this paper,a 3D die-stacked SRAM device is constructed based on a real planar SRAM device.Then,the single event upsets(SEUs)caused by neutrons with different energies are studied by the Monte Carlo method.The SEU cross-sections for each die and for the whole three-layer die-stacked SRAM device is obtained for neutrons with energy ranging from 1 MeV to 1000 MeV.The results indicate that the variation trend of the SEU cross-section for every single die and for the entire die-stacked device is consistent,but the specific values are different.The SEU cross-section is shown to be dependent on the threshold of linear energy transfer(LETth)and thickness of the sensitive volume(Tsv).The secondary particle distribution and energy deposition are analyzed,and the internal mechanism that is responsible for this difference is illustrated.Besides,the ratio and patterns of multiple bit upset(MBU)caused by neutrons with different energies are also presented.This work is helpful for the aerospace IC designers to understand the SEU mechanism of 3D ICs caused by neutrons irradiation.
基金supported by the National Natural Science Foundation of China(No.21327801)
文摘Knowledge of actinides(n,f) fission process induced by neutron is of importance in the field of nuclear power and nuclear engineering,especially for reactor applications.In this work,fission characteristics of^(238)U(n,f) reaction induced by D-T neutron source were simulated with Geant4 code from multiple perspectives,including the fission production yields,total nubar,kinetic energy distribution,fission neutron spectrum and cumulative γ-ray spectrum of the fission products.The simulation results agree well with the experimental nuclear reaction data(EXFOR) and evaluated nuclear data(ENDF).Mainly,this work was to examine the rationality of the parametric nuclear fission model in Geant4 and to direct our future experimental measurements for the cumulative fission yields of ^(238)U(n,f) reaction.
文摘Type I X-ray bursts are the most frequent thermonuclear explosions in nature,resulting from thermonuclear runaway on the surface of an accreting neutron star[1].The breakout reaction 14O(α ,p)17F from the hot CNO cycle may have a prominent impact on the burst light curve and burst ashes[2].However,insufficient experimental information is available to calculate a reliable,precise rate for this reaction[3].We proposed to address the experimental investigation of the 14O(α,p)17F using Time Projection Chamber(TPC)[4].
基金Opening Foundation of Key Laboratory of Explosive Energy Utilization and Control,Anhui Province(BP20240104)Graduate Innovation Program of China University of Mining and Technology(2024WLJCRCZL049)Postgraduate Research&Practice Innovation Program of Jiangsu Province(KYCX24_2701)。
文摘Because of the challenge of compounding lightweight,high-strength Ti/Al alloys due to their considerable disparity in properties,Al 6063 as intermediate layer was proposed to fabricate TC4/Al 6063/Al 7075 three-layer composite plate by explosive welding.The microscopic properties of each bonding interface were elucidated through field emission scanning electron microscope and electron backscattered diffraction(EBSD).A methodology combining finite element method-smoothed particle hydrodynamics(FEM-SPH)and molecular dynamics(MD)was proposed for the analysis of the forming and evolution characteristics of explosive welding interfaces at multi-scale.The results demonstrate that the bonding interface morphologies of TC4/Al 6063 and Al 6063/Al 7075 exhibit a flat and wavy configuration,without discernible defects or cracks.The phenomenon of grain refinement is observed in the vicinity of the two bonding interfaces.Furthermore,the degree of plastic deformation of TC4 and Al 7075 is more pronounced than that of Al 6063 in the intermediate layer.The interface morphology characteristics obtained by FEM-SPH simulation exhibit a high degree of similarity to the experimental results.MD simulations reveal that the diffusion of interfacial elements predominantly occurs during the unloading phase,and the simulated thickness of interfacial diffusion aligns well with experimental outcomes.The introduction of intermediate layer in the explosive welding process can effectively produce high-quality titanium/aluminum alloy composite plates.Furthermore,this approach offers a multi-scale simulation strategy for the study of explosive welding bonding interfaces.
