Glacier landslide cascading hazards pose threats to communities and infrastructure,affected by complex processes including the amplification of mass flow volume through erosion and entrainment,transformation of hazard...Glacier landslide cascading hazards pose threats to communities and infrastructure,affected by complex processes including the amplification of mass flow volume through erosion and entrainment,transformation of hazard types,ice-water phase change,and enhanced mobility of the mass flow.Scientifically simulating these physical phenomena proves challenging.This study introduces GMFA(glacier mass flow analysis),an integrated numerical model that advances the field by:(1)proposing depth-averaged fluctuation energy and internal energy equations,(2)incorporating the ice-water phase change and the entrainment-deposition process,and(3)capturing their effects on mass flow runout characteristics.The model employs the finite volume method to solve the multi-physics coupled governing equations,enabling efficient large-scale simulations.The model is verified through three numerical tests covering flow dynamics,temperature evolution,and thermo-hydro-mechanical runout processes.The model is applied to analyze a hazard chain that occurred on 10 September 2020 on the Tibetan Plateau.The multi-scenario simulation results indicate an entrained mass volume of(4.95±0.11)×10^(5)m^(3),and a ratio of entrained mass volume to source material volume of 0.44.The solid concentration decreases from 0.6-0.7 to 0.1-0.15 with increasing runout distance,indicating a transition from avalanche to debris flood.The internal energy rises by(3-4)×10^(3)kJ/m^(3),driving rapid ice melting from 0.1 to 0.2 to near-zero concentration.The model effectively quantifies volume amplification,ice-water phase changes,and multi-hazard transformations.This model pushes the geoscience frontier,extending computational capability from single-to multi-hazard simulations and providing a powerful tool for analyzing glacier cascading hazards.展开更多
The indirect detection method basic principle of rate and concentration,application range and research results on gassolid two phase flow were discussed.The present development situation and the existing problems of r...The indirect detection method basic principle of rate and concentration,application range and research results on gassolid two phase flow were discussed.The present development situation and the existing problems of rate and concentration detection technology were analyzed and summarized.Emphatically analyzed the existing problems in the industrial application and research status of electrostatic method in measuring phase concentration.Design criterion of electrostatic phase concentration sensor is given,the superiority and wide industrial application prospect of the sensor used for phase concentration measurement are clarified.展开更多
Erosion is one of the most concerning issues in pipeline flow assurance for the Oil&Gas pipeline industries,which can easily lead to wall thinning,perforation leakage,and other crucial safety risks to the steady o...Erosion is one of the most concerning issues in pipeline flow assurance for the Oil&Gas pipeline industries,which can easily lead to wall thinning,perforation leakage,and other crucial safety risks to the steady operation of pipelines.In this research,a novel experimental device is designed to investigate the erosion characteristics of 304 stainless and L245 carbon steel in the gas-solid two-phase flow.Regarding the impacts on erosion rate,the typical factors such as gas velocity,impact angle,erosion time,particle material and target material are individually observed and comprehensive analyzed with the assistance of apparent morphology characterized via Scanning Electron Microscope.Experimental results show that the severest erosion occurs when the angle reaches approximate 30°whether eroded by type I or type II particles,which is observed in both two types of steel.Concretely,304 stainless steel and L245 carbon steel appear to be cut at low angles,and impacted at high angles to form erosion pits.In the steady operational state,the erosion rate is insensitive to the short erosion time and free from the influences caused by the“erosion latent period”.Based on the comparison between experimental data and numerical results generated by existing erosion models,a modified model with low tolerance(<3%),high feasibility and strong consistency is proposed to make an accurate prediction of the erosion in terms of two types of steel under various industrial conditions.展开更多
Gas-solid two-phase turbulent flows,mass transfer,heat transfer and catalytic cracking reactions areknown to exert interrelated influences in commercial fluid catalytic cracking(FCC)riser reactors.In the presentpaper,...Gas-solid two-phase turbulent flows,mass transfer,heat transfer and catalytic cracking reactions areknown to exert interrelated influences in commercial fluid catalytic cracking(FCC)riser reactors.In the presentpaper,a three-dimensional turbulent gas-solid two-phase flow-reaction model for FCC riser reactors was devel-oped.The model took into account the gas-solid two-phase turbulent flows,inter-phase heat transfer,masstransfer,catalytic cracking reactions and their interrelated influence.The k-V-k_P two-phase turbulence modelwas employed and modified for the two-phase turbulent flow patterns with relatively high particle concentration.Boundary conditions for the flow-reaction model were given.Related numerical algorithm was formed and a nu-merical code was drawn up.Numerical modeling for commercial FCC riser reactors could be carried out with thepresented model.展开更多
Using a gas-solid two-phase model(a discrete phase model),the authors investigated the flow field inside the multi-channel nozzle for surface nanocrystallization(SNC)induced by the ultrasonic particulate peening(USPP)...Using a gas-solid two-phase model(a discrete phase model),the authors investigated the flow field inside the multi-channel nozzle for surface nanocrystallization(SNC)induced by the ultrasonic particulate peening(USPP).By computation,the velocity fields of both the gas and the solid phases were simulated and the track of the solid phase was analyzed in detail.It can be found that the velocities of the two phases are able to reach an ultrasonic level;meanwhile,the dispersion width of the solid phase at the nozzle exit is less than that of the gas phase.When particle diameters are less than 5μm,there is a decreasing trend in the dispersion width of the solid phase with an increase in particle diameters.The trend becomes stable as the particle diameters are greater than 5μm;in the meantime,the distribution of solid particles is near the axis of the jet flow.The optimal standoff distance between the nozzle and the substrate in the process of USPP is about 120 mm.Simulation results can help improve the design of mass-production-oriented multi-channel nozzles for SNC induced by USPP.展开更多
Pickup mouth is a key component for the service performance of a street sweeper. Computational fluid dynamics( CFD) technology,as an analysis tool in fluid flow simulation,is employed in this work because it can great...Pickup mouth is a key component for the service performance of a street sweeper. Computational fluid dynamics( CFD) technology,as an analysis tool in fluid flow simulation,is employed in this work because it can greatly shorten the design period. To obtain higher simulation accuracy,the gas-solid coupling inside the process cannot be neglected during numerical simulation.Our optimization procedure considers the influence of structure and operational parameters. It is recommended that the outlet diameter is less than 0. 42 of the width and the outlet inclination angle is 110°for structure parameters. The dust collection efficiency is improved when the reverse flow rate is 70% of the total volume,the sweepertraveling speed is 10 km / h,and the pressure drop is 2 400 Pa.Simulation results exhibit well consistency with the physical experimental results.展开更多
The gas-solid two-phase flous of the precalciner were simulated by different multiphase models,such as mixture model,the Enderium model,including mixture and dispersed,and discrete phase model（DPM）,The results of th...The gas-solid two-phase flous of the precalciner were simulated by different multiphase models,such as mixture model,the Enderium model,including mixture and dispersed,and discrete phase model（DPM）,The results of the different multiphase models were analyzed and compared.showing the rationality of the diffusion and mixture of the cenment raic meals and coal poroder some extent Moreover,the results also shose the rationality of the given inlets parameters of actual process of the precalciner.展开更多
Energetic Semiconductor bridge(ESCB)based on reactive multilayered films(RMFs)has a promising application in the miniature and intelligence of initiator and pyrotechnics device.Understanding the ignition enhancement m...Energetic Semiconductor bridge(ESCB)based on reactive multilayered films(RMFs)has a promising application in the miniature and intelligence of initiator and pyrotechnics device.Understanding the ignition enhancement mechanism of RMFs on semiconductor bridge(SCB)during the ignition process is crucial for the engineering and practical application of advanced initiator and pyrotechnics devices.In this study,a one-dimensional(1D)gas-solid two-phase flow ignition model was established to study the ignition process of ESCB to charge particles based on the reactivity of Al/MoO_(3) RMFs.In order to fully consider the coupled exothermic between the RMFs and the SCB plasma during the ignition process,the heat release of chemical reaction in RMFs was used as an internal heat source in this model.It is found that the exothermal reaction in RMFs improved the ignition performance of SCB.In the process of plasma rapid condensation with heat release,the product of RMFs enhanced the heat transfer process between the gas phase and the solid charge particle,which accelerated the expansion of hot plasma,and heated the solid charge particle as well as gas phase region with low temperature.In addition,it made up for pressure loss in the gas phase.During the plasma dissipation process,the exothermal chemical reaction in RMFs acted as the main heating source to heat the charge particle,making the surface temperature of the charge particle,gas pressure,and gas temperature rise continuously.This result may yield significant advantages in providing a universal ignition model for miniaturized ignition devices.展开更多
Hydrate phase transition may pose risks in pipeline blockage and severe challenges for offshore natural gas hydrate pro-duction.The present work involves the development of a multiphase gas-liquid-solid vertical slug ...Hydrate phase transition may pose risks in pipeline blockage and severe challenges for offshore natural gas hydrate pro-duction.The present work involves the development of a multiphase gas-liquid-solid vertical slug flow hydrodynamic model consi-dering hydrate phase transition kinetics with heat and mass transfer behaviors.The varying gas physical properties due to pressure and temperature variations are also introduced to evaluate vertical slug flow characteristics.The proposed model is used to carry out a series of numerical simulations to examine the interactions between hydrate phase transition and vertical slug flow hydrodynamics.Furthermore,the hydrate volumetric fractions under different pressure and temperature conditions are predicted.The results reveal that hydrate formation and gas expansion cause the mixture superficial velocity,and the gas and liquid fractions,void fraction in liq-uid slug,and unit length tend to decrease.The increase in outlet pressure leads to an increased hydrate formation rate,which not only increases the hydrate volumetric fraction along the pipe but also causes the upward shift of the hydrate phase transition critical point.展开更多
The serrated flow behavior,known as the Portevin-Le Chatelier(PLC)effect,is commonly observed during high-temperature deformation.In this study,we report a serrated flow behavior in FeCoCrNiMo0.2 high-entropy alloy(HE...The serrated flow behavior,known as the Portevin-Le Chatelier(PLC)effect,is commonly observed during high-temperature deformation.In this study,we report a serrated flow behavior in FeCoCrNiMo0.2 high-entropy alloy(HEA),which is mediated by nano-twinning and phase transformation at cryogenic temperatures.During uniaxial tensile deformation at 77 K,the alloy exhibited the formation of high-density deformation nano-twinning,cross-twinning,stacking faults(SFs)and Lomer-Cottrell locks(L-C locks).Additionally,the lower stacking fault energy(SFE)at low temperatures promotes the formation of the 9R phase.The high-density twin boundaries effectively hinder dislocation movement,leading to the instability of plastic deformation and promoting the serrated flow behavior.Furthermore,the rapid and unstable transformation of the 9R phase contributes to the pronounced serrated flow behavior.Nano-twinning,SFs,cross-twinning,L-C locks and 9R phase collectively induce a dynamic Hall-Petch effect,enhancing the strength-ductility synergy and strain-hardening ability of deformed alloy at 77 K.Our work provides valuable insights into the mechanism of tensile deformation at cryogenic temperatures in single-phase FCC HEA.展开更多
A new method for measuring the solid flow rate in gas solid two phase flow is introduced in this paper. An electrically heated probe was put in a gas solid two phase flow. For certain solid particles, the flow medi...A new method for measuring the solid flow rate in gas solid two phase flow is introduced in this paper. An electrically heated probe was put in a gas solid two phase flow. For certain solid particles, the flow media with different velocities and concentrations of particles produced different effects on heat transfer with the probe. The solid flow rate can be measured according to the intensity of heat transfer. Experiments were made on a pilot pneumatic conveying device. Research results prove that the method works effectively and reliably.展开更多
Aiming at the characteristics of the long tubular powder,a one-dimensional discrete group gas-solid two-phase flow model was established for the large caliber high speed Davis gun with a tubular modular charge.In this...Aiming at the characteristics of the long tubular powder,a one-dimensional discrete group gas-solid two-phase flow model was established for the large caliber high speed Davis gun with a tubular modular charge.In this model,the tubular modules were described by the Lagrangian system without being assumed as pseudofluid,whereas the gas field is described by Eulerian system.The new model was used to simulate a 480 mm Davis gun.The simulation results were compared with test results,and the model was verified to be feasibility.This study provides a new method to research the interior ballistic performance of Davis guns.展开更多
This study presents a two-dimensional,transient model to simulate the flow and thermal behavior of CO_(2) within a fracturing wellbore.The model accounts for high-velocity flow within the tubing and radial heat exchan...This study presents a two-dimensional,transient model to simulate the flow and thermal behavior of CO_(2) within a fracturing wellbore.The model accounts for high-velocity flow within the tubing and radial heat exchange between the wellbore and surrounding formation.It captures the temporal evolution of temperature,pressure,flow velocity,and fluid density,enabling detailed analysis of phase transitions along different tubing sections.The influence of key operational and geological parameters,including wellhead pressure,injection velocity,inlet temperature,and formation temperature gradient,on the wellbore’s thermal and pressure fields is systematically investigated.Results indicate that due to intense convective transport by the high-speed CO_(2) flow,the temperature and velocity within the tubing are primarily governed by the inlet temperature and injection velocity,with relatively minor influence from radial heat transfer with the formation.The pressure,flow velocity,and density of CO_(2) within the tubing are strongly dependent on wellhead conditions.Frictional losses and well depth contribute to pressure variations,particularly in the horizontal section of the wellbore,where a noticeable pressurization effect increases the fluid density.During injection,liquid CO_(2) initially undergoes a rapid transition to a supercritical state,with the depth at which this phase change occurs stabilizing as injection progresses.展开更多
The influence of supercooled melt forced lamina flow on microsegregation was investigated. The concentration distribution at solid-liquid boundary of binary alloy Ni-Cu was simulated using phase field model coupled wi...The influence of supercooled melt forced lamina flow on microsegregation was investigated. The concentration distribution at solid-liquid boundary of binary alloy Ni-Cu was simulated using phase field model coupled with flow field. The microsegregation, concentration maximum value, boundary thickness of concentration near upstream dendrite and normal to flow dendrite, and downstream dendrite were studied quantitatively in the case of forced lamia flow. The simulation results show that solute field and flow field interact complexly. Compared with melt without flow, in front of upstream dendrite tip, the concentration boundary thickness is the lowest and the concentration maximum value is the smallest for melt with flow. However, in front of downstream dendrite tip, the results are just the opposite. The zone of poor Cu in upstream dendrite where is the most severely microsegregation and shrinkage cavity is wider and the concentration is lower for melt with flow than that without flow.展开更多
Characteristics of the Internet traffic data flow are studied based on the chaos theory. A phase space that is isometric with the network dynamic system is reconstructed by using the single variable time series of a n...Characteristics of the Internet traffic data flow are studied based on the chaos theory. A phase space that is isometric with the network dynamic system is reconstructed by using the single variable time series of a network flow. Some parameters, such as the correlative dimension and the Lyapunov exponent are calculated, and the chaos characteristic is proved to exist in Internet traffic data flows. A neural network model is construct- ed based on radial basis function （RBF） to forecast actual Internet traffic data flow. Simulation results show that, compared with other forecasts of the forward-feedback neural network, the forecast of the RBF neural network based on the chaos theory has faster learning capacity and higher forecasting accuracy.展开更多
Hursts rescaled range (R/S) analysis and Wolfs attractor reconstruction technique have been adopted to estimate the local fractal dimensions and the local largest Lyapunov exponents in terms of the time series pressur...Hursts rescaled range (R/S) analysis and Wolfs attractor reconstruction technique have been adopted to estimate the local fractal dimensions and the local largest Lyapunov exponents in terms of the time series pressure fluctuations obtained from a gas liquid solid three phase self aspirated reversed flow jet loop reactor,respectively.The results indicate that the local fractal dimensions and the local largest Lyapunov exponents in both the jet region and the tubular region inside the draft tube increase with the increase in the jet liquid flowrates and the solid loadings,the local fractal dimension profiles are similar to those of the largest Lyapunov exponent,the local largest lyapunov exponents are positive for all cases,and the flow behavior of such a reactor is chaotic.The local nonlinear characteristic parameters such as the local fractal dimension and the local largest Lyapunov exponent could be applied to further study the flow properties such as the flow regime transitions and flow structures of this three phase jet loop reactor.展开更多
Retrograde condensation frequently occurs during the development of gas condensate reservoirs. The loss of productivity is often observed due to the reduced relative permeability to gas as condensate accumulates ne...Retrograde condensation frequently occurs during the development of gas condensate reservoirs. The loss of productivity is often observed due to the reduced relative permeability to gas as condensate accumulates near the well bore region. How to describe the condensate blockage effect exactly has been a continuous research topic. However, up to now, the present methods usually over-estimate or underestimate the productivity reduction due to an incorrect understanding of the mechanism of flow in porous medium, which inevitably results in an inaccurate prediction of production performance. It has been found in recent numerous theoretical and experimental studies that capillary number and non-Darcy flow have significant influence on relative permeability in regions near the well bore. The two effects impose opposite impacts on production performance, thus leading to gas condensate flow showing characteristics different from general understanding. It is significant for prediction of performance in gas condensate wells to understand the two effects exactly. The aim of the paper is to describe and analyze the flow dynamics in porous media accurately during the production of gas condensate reservoirs. Based on the description of three-zone flow mechanism, capillary number and non-Darcy effect are incorporated in the analysis of relative permeability, making it possible to describe the effect of condensate blockage. The effect of capillary number and inertial flow on gas and condensate relative permeability is analyzed in detail. Novel Inflow Performance Relation (IPR) models considering high velocity effects are formulated and the contrast analysis of different IPR models is conducted. The result shows that the proposed method can help predict the production performance and productivity more accurately than conventional methods.展开更多
It is very important to understand the annular multiphase flow behavior and the effect of hydrate phase transition during deep water drilling. The basic hydrodynamic models, including mass, momentum, and energy conser...It is very important to understand the annular multiphase flow behavior and the effect of hydrate phase transition during deep water drilling. The basic hydrodynamic models, including mass, momentum, and energy conservation equations, were established for annular flow with gas hydrate phase transition during gas kick. The behavior of annular multiphase flow with hydrate phase transition was investigated by analyzing the hydrate-forming region, the gas fraction in the fluid flowing in the annulus, pit gain, bottom hole pressure, and shut-in casing pressure. The simulation shows that it is possible to move the hydrate-forming region away from sea floor by increasing the circulation rate. The decrease in gas volume fraction in the annulus due to hydrate formation reduces pit gain, which can delay the detection of well kick and increase the risk of hydrate plugging in lines. Caution is needed when a well is monitored for gas kick at a relatively low gas production rate, because the possibility of hydrate presence is much greater than that at a relatively high production rate. The shut-in casing pressure cannot reflect the gas kick due to hydrate formation, which increases with time.展开更多
基金supports from the National Natural Science Foundation of China(Grant No.U20A20112)the Research Grants Council of the Hong Kong SAR Government,China(Grant Nos.T22-606/23-R and 16206923).
文摘Glacier landslide cascading hazards pose threats to communities and infrastructure,affected by complex processes including the amplification of mass flow volume through erosion and entrainment,transformation of hazard types,ice-water phase change,and enhanced mobility of the mass flow.Scientifically simulating these physical phenomena proves challenging.This study introduces GMFA(glacier mass flow analysis),an integrated numerical model that advances the field by:(1)proposing depth-averaged fluctuation energy and internal energy equations,(2)incorporating the ice-water phase change and the entrainment-deposition process,and(3)capturing their effects on mass flow runout characteristics.The model employs the finite volume method to solve the multi-physics coupled governing equations,enabling efficient large-scale simulations.The model is verified through three numerical tests covering flow dynamics,temperature evolution,and thermo-hydro-mechanical runout processes.The model is applied to analyze a hazard chain that occurred on 10 September 2020 on the Tibetan Plateau.The multi-scenario simulation results indicate an entrained mass volume of(4.95±0.11)×10^(5)m^(3),and a ratio of entrained mass volume to source material volume of 0.44.The solid concentration decreases from 0.6-0.7 to 0.1-0.15 with increasing runout distance,indicating a transition from avalanche to debris flood.The internal energy rises by(3-4)×10^(3)kJ/m^(3),driving rapid ice melting from 0.1 to 0.2 to near-zero concentration.The model effectively quantifies volume amplification,ice-water phase changes,and multi-hazard transformations.This model pushes the geoscience frontier,extending computational capability from single-to multi-hazard simulations and providing a powerful tool for analyzing glacier cascading hazards.
基金Science and Technology on Electronic Test and Measurement Laboratory(No.9140C12040515X)
文摘The indirect detection method basic principle of rate and concentration,application range and research results on gassolid two phase flow were discussed.The present development situation and the existing problems of rate and concentration detection technology were analyzed and summarized.Emphatically analyzed the existing problems in the industrial application and research status of electrostatic method in measuring phase concentration.Design criterion of electrostatic phase concentration sensor is given,the superiority and wide industrial application prospect of the sensor used for phase concentration measurement are clarified.
基金supported by the Zhejiang Province Key Research and Development Plan(2021C03152)Zhoushan Science and Technology Project(2021C21011)+1 种基金Industrial Project of Public Technology Research of Zhejiang Province Science and Technology Department(LGG18E040001)Scientific Research Project of Zhejiang Province Education Department(Y20173854)
文摘Erosion is one of the most concerning issues in pipeline flow assurance for the Oil&Gas pipeline industries,which can easily lead to wall thinning,perforation leakage,and other crucial safety risks to the steady operation of pipelines.In this research,a novel experimental device is designed to investigate the erosion characteristics of 304 stainless and L245 carbon steel in the gas-solid two-phase flow.Regarding the impacts on erosion rate,the typical factors such as gas velocity,impact angle,erosion time,particle material and target material are individually observed and comprehensive analyzed with the assistance of apparent morphology characterized via Scanning Electron Microscope.Experimental results show that the severest erosion occurs when the angle reaches approximate 30°whether eroded by type I or type II particles,which is observed in both two types of steel.Concretely,304 stainless steel and L245 carbon steel appear to be cut at low angles,and impacted at high angles to form erosion pits.In the steady operational state,the erosion rate is insensitive to the short erosion time and free from the influences caused by the“erosion latent period”.Based on the comparison between experimental data and numerical results generated by existing erosion models,a modified model with low tolerance(<3%),high feasibility and strong consistency is proposed to make an accurate prediction of the erosion in terms of two types of steel under various industrial conditions.
文摘Gas-solid two-phase turbulent flows,mass transfer,heat transfer and catalytic cracking reactions areknown to exert interrelated influences in commercial fluid catalytic cracking(FCC)riser reactors.In the presentpaper,a three-dimensional turbulent gas-solid two-phase flow-reaction model for FCC riser reactors was devel-oped.The model took into account the gas-solid two-phase turbulent flows,inter-phase heat transfer,masstransfer,catalytic cracking reactions and their interrelated influence.The k-V-k_P two-phase turbulence modelwas employed and modified for the two-phase turbulent flow patterns with relatively high particle concentration.Boundary conditions for the flow-reaction model were given.Related numerical algorithm was formed and a nu-merical code was drawn up.Numerical modeling for commercial FCC riser reactors could be carried out with thepresented model.
基金supported by the National High-Tech.R&D Program of China(the National 863 plans projects,Grant No.2007AA03Z352)
文摘Using a gas-solid two-phase model(a discrete phase model),the authors investigated the flow field inside the multi-channel nozzle for surface nanocrystallization(SNC)induced by the ultrasonic particulate peening(USPP).By computation,the velocity fields of both the gas and the solid phases were simulated and the track of the solid phase was analyzed in detail.It can be found that the velocities of the two phases are able to reach an ultrasonic level;meanwhile,the dispersion width of the solid phase at the nozzle exit is less than that of the gas phase.When particle diameters are less than 5μm,there is a decreasing trend in the dispersion width of the solid phase with an increase in particle diameters.The trend becomes stable as the particle diameters are greater than 5μm;in the meantime,the distribution of solid particles is near the axis of the jet flow.The optimal standoff distance between the nozzle and the substrate in the process of USPP is about 120 mm.Simulation results can help improve the design of mass-production-oriented multi-channel nozzles for SNC induced by USPP.
基金National Natural Science Foundation of China(No.51375202)
文摘Pickup mouth is a key component for the service performance of a street sweeper. Computational fluid dynamics( CFD) technology,as an analysis tool in fluid flow simulation,is employed in this work because it can greatly shorten the design period. To obtain higher simulation accuracy,the gas-solid coupling inside the process cannot be neglected during numerical simulation.Our optimization procedure considers the influence of structure and operational parameters. It is recommended that the outlet diameter is less than 0. 42 of the width and the outlet inclination angle is 110°for structure parameters. The dust collection efficiency is improved when the reverse flow rate is 70% of the total volume,the sweepertraveling speed is 10 km / h,and the pressure drop is 2 400 Pa.Simulation results exhibit well consistency with the physical experimental results.
文摘The gas-solid two-phase flous of the precalciner were simulated by different multiphase models,such as mixture model,the Enderium model,including mixture and dispersed,and discrete phase model（DPM）,The results of the different multiphase models were analyzed and compared.showing the rationality of the diffusion and mixture of the cenment raic meals and coal poroder some extent Moreover,the results also shose the rationality of the given inlets parameters of actual process of the precalciner.
基金supported by the National Natural Science Foundation of China(Grant Nos.22275092,52102107 and 52372084)the Fundamental Research Funds for the Central Universities(Grant No.30923010920)。
文摘Energetic Semiconductor bridge(ESCB)based on reactive multilayered films(RMFs)has a promising application in the miniature and intelligence of initiator and pyrotechnics device.Understanding the ignition enhancement mechanism of RMFs on semiconductor bridge(SCB)during the ignition process is crucial for the engineering and practical application of advanced initiator and pyrotechnics devices.In this study,a one-dimensional(1D)gas-solid two-phase flow ignition model was established to study the ignition process of ESCB to charge particles based on the reactivity of Al/MoO_(3) RMFs.In order to fully consider the coupled exothermic between the RMFs and the SCB plasma during the ignition process,the heat release of chemical reaction in RMFs was used as an internal heat source in this model.It is found that the exothermal reaction in RMFs improved the ignition performance of SCB.In the process of plasma rapid condensation with heat release,the product of RMFs enhanced the heat transfer process between the gas phase and the solid charge particle,which accelerated the expansion of hot plasma,and heated the solid charge particle as well as gas phase region with low temperature.In addition,it made up for pressure loss in the gas phase.During the plasma dissipation process,the exothermal chemical reaction in RMFs acted as the main heating source to heat the charge particle,making the surface temperature of the charge particle,gas pressure,and gas temperature rise continuously.This result may yield significant advantages in providing a universal ignition model for miniaturized ignition devices.
基金supported by the National Natural Science Foundation of China(No.52301355)the Natu-ral Science Foundation of Qingdao Municipality(No.23-2-1-108-zyyd-jch)the China University of Petroleum(East China)Independent Innovation Research Project(Science and Engineering)-Leading Talent Cultivation Fund(No.24CX07001A).
文摘Hydrate phase transition may pose risks in pipeline blockage and severe challenges for offshore natural gas hydrate pro-duction.The present work involves the development of a multiphase gas-liquid-solid vertical slug flow hydrodynamic model consi-dering hydrate phase transition kinetics with heat and mass transfer behaviors.The varying gas physical properties due to pressure and temperature variations are also introduced to evaluate vertical slug flow characteristics.The proposed model is used to carry out a series of numerical simulations to examine the interactions between hydrate phase transition and vertical slug flow hydrodynamics.Furthermore,the hydrate volumetric fractions under different pressure and temperature conditions are predicted.The results reveal that hydrate formation and gas expansion cause the mixture superficial velocity,and the gas and liquid fractions,void fraction in liq-uid slug,and unit length tend to decrease.The increase in outlet pressure leads to an increased hydrate formation rate,which not only increases the hydrate volumetric fraction along the pipe but also causes the upward shift of the hydrate phase transition critical point.
基金supported by the National Natural Science Foundation of China(Nos.52474403,52364050 and 52301137)Guizhou Provincial Program on Commercialization of Scientific and Technological Achievements(No.[2023]001)+2 种基金Guizhou Province Science and Technology Project(No.[2022]050)Guiyang city Science and Technology Project(No.[2023]48-16)the Central Government in Guidance of Local Science and Technology Development Funds(No.[2024]032).
文摘The serrated flow behavior,known as the Portevin-Le Chatelier(PLC)effect,is commonly observed during high-temperature deformation.In this study,we report a serrated flow behavior in FeCoCrNiMo0.2 high-entropy alloy(HEA),which is mediated by nano-twinning and phase transformation at cryogenic temperatures.During uniaxial tensile deformation at 77 K,the alloy exhibited the formation of high-density deformation nano-twinning,cross-twinning,stacking faults(SFs)and Lomer-Cottrell locks(L-C locks).Additionally,the lower stacking fault energy(SFE)at low temperatures promotes the formation of the 9R phase.The high-density twin boundaries effectively hinder dislocation movement,leading to the instability of plastic deformation and promoting the serrated flow behavior.Furthermore,the rapid and unstable transformation of the 9R phase contributes to the pronounced serrated flow behavior.Nano-twinning,SFs,cross-twinning,L-C locks and 9R phase collectively induce a dynamic Hall-Petch effect,enhancing the strength-ductility synergy and strain-hardening ability of deformed alloy at 77 K.Our work provides valuable insights into the mechanism of tensile deformation at cryogenic temperatures in single-phase FCC HEA.
文摘A new method for measuring the solid flow rate in gas solid two phase flow is introduced in this paper. An electrically heated probe was put in a gas solid two phase flow. For certain solid particles, the flow media with different velocities and concentrations of particles produced different effects on heat transfer with the probe. The solid flow rate can be measured according to the intensity of heat transfer. Experiments were made on a pilot pneumatic conveying device. Research results prove that the method works effectively and reliably.
文摘Aiming at the characteristics of the long tubular powder,a one-dimensional discrete group gas-solid two-phase flow model was established for the large caliber high speed Davis gun with a tubular modular charge.In this model,the tubular modules were described by the Lagrangian system without being assumed as pseudofluid,whereas the gas field is described by Eulerian system.The new model was used to simulate a 480 mm Davis gun.The simulation results were compared with test results,and the model was verified to be feasibility.This study provides a new method to research the interior ballistic performance of Davis guns.
基金funded by National Natural Science Foundation of China(Mechanisms of proppant-carrying transport by magnetic cross-linked microparticle grids and their degradation patterns in CO_(2) fractured cracks).
文摘This study presents a two-dimensional,transient model to simulate the flow and thermal behavior of CO_(2) within a fracturing wellbore.The model accounts for high-velocity flow within the tubing and radial heat exchange between the wellbore and surrounding formation.It captures the temporal evolution of temperature,pressure,flow velocity,and fluid density,enabling detailed analysis of phase transitions along different tubing sections.The influence of key operational and geological parameters,including wellhead pressure,injection velocity,inlet temperature,and formation temperature gradient,on the wellbore’s thermal and pressure fields is systematically investigated.Results indicate that due to intense convective transport by the high-speed CO_(2) flow,the temperature and velocity within the tubing are primarily governed by the inlet temperature and injection velocity,with relatively minor influence from radial heat transfer with the formation.The pressure,flow velocity,and density of CO_(2) within the tubing are strongly dependent on wellhead conditions.Frictional losses and well depth contribute to pressure variations,particularly in the horizontal section of the wellbore,where a noticeable pressurization effect increases the fluid density.During injection,liquid CO_(2) initially undergoes a rapid transition to a supercritical state,with the depth at which this phase change occurs stabilizing as injection progresses.
基金Project (10964004) supported by the National Natural Science Foundation of ChinaProject (20070731001) supported by Research Fund for the Doctoral Program of ChinaProject (096RJZA104) supported by the Natural Science Foundation of Gansu Province,China
文摘The influence of supercooled melt forced lamina flow on microsegregation was investigated. The concentration distribution at solid-liquid boundary of binary alloy Ni-Cu was simulated using phase field model coupled with flow field. The microsegregation, concentration maximum value, boundary thickness of concentration near upstream dendrite and normal to flow dendrite, and downstream dendrite were studied quantitatively in the case of forced lamia flow. The simulation results show that solute field and flow field interact complexly. Compared with melt without flow, in front of upstream dendrite tip, the concentration boundary thickness is the lowest and the concentration maximum value is the smallest for melt with flow. However, in front of downstream dendrite tip, the results are just the opposite. The zone of poor Cu in upstream dendrite where is the most severely microsegregation and shrinkage cavity is wider and the concentration is lower for melt with flow than that without flow.
文摘Characteristics of the Internet traffic data flow are studied based on the chaos theory. A phase space that is isometric with the network dynamic system is reconstructed by using the single variable time series of a network flow. Some parameters, such as the correlative dimension and the Lyapunov exponent are calculated, and the chaos characteristic is proved to exist in Internet traffic data flows. A neural network model is construct- ed based on radial basis function （RBF） to forecast actual Internet traffic data flow. Simulation results show that, compared with other forecasts of the forward-feedback neural network, the forecast of the RBF neural network based on the chaos theory has faster learning capacity and higher forecasting accuracy.
文摘Hursts rescaled range (R/S) analysis and Wolfs attractor reconstruction technique have been adopted to estimate the local fractal dimensions and the local largest Lyapunov exponents in terms of the time series pressure fluctuations obtained from a gas liquid solid three phase self aspirated reversed flow jet loop reactor,respectively.The results indicate that the local fractal dimensions and the local largest Lyapunov exponents in both the jet region and the tubular region inside the draft tube increase with the increase in the jet liquid flowrates and the solid loadings,the local fractal dimension profiles are similar to those of the largest Lyapunov exponent,the local largest lyapunov exponents are positive for all cases,and the flow behavior of such a reactor is chaotic.The local nonlinear characteristic parameters such as the local fractal dimension and the local largest Lyapunov exponent could be applied to further study the flow properties such as the flow regime transitions and flow structures of this three phase jet loop reactor.
基金Project“973",a national fundamental research development program
文摘Retrograde condensation frequently occurs during the development of gas condensate reservoirs. The loss of productivity is often observed due to the reduced relative permeability to gas as condensate accumulates near the well bore region. How to describe the condensate blockage effect exactly has been a continuous research topic. However, up to now, the present methods usually over-estimate or underestimate the productivity reduction due to an incorrect understanding of the mechanism of flow in porous medium, which inevitably results in an inaccurate prediction of production performance. It has been found in recent numerous theoretical and experimental studies that capillary number and non-Darcy flow have significant influence on relative permeability in regions near the well bore. The two effects impose opposite impacts on production performance, thus leading to gas condensate flow showing characteristics different from general understanding. It is significant for prediction of performance in gas condensate wells to understand the two effects exactly. The aim of the paper is to describe and analyze the flow dynamics in porous media accurately during the production of gas condensate reservoirs. Based on the description of three-zone flow mechanism, capillary number and non-Darcy effect are incorporated in the analysis of relative permeability, making it possible to describe the effect of condensate blockage. The effect of capillary number and inertial flow on gas and condensate relative permeability is analyzed in detail. Novel Inflow Performance Relation (IPR) models considering high velocity effects are formulated and the contrast analysis of different IPR models is conducted. The result shows that the proposed method can help predict the production performance and productivity more accurately than conventional methods.
基金supported by the China National 863 Program (Grant No.2006AA09A106)the Doctoral Program of Higher Education of China (Grant No.20060425502)+1 种基金the National Natural Science Foundation of China (Grant No.50874116)Shandong Province Natural Science Foundation(Grant No.Z2007A01)
文摘It is very important to understand the annular multiphase flow behavior and the effect of hydrate phase transition during deep water drilling. The basic hydrodynamic models, including mass, momentum, and energy conservation equations, were established for annular flow with gas hydrate phase transition during gas kick. The behavior of annular multiphase flow with hydrate phase transition was investigated by analyzing the hydrate-forming region, the gas fraction in the fluid flowing in the annulus, pit gain, bottom hole pressure, and shut-in casing pressure. The simulation shows that it is possible to move the hydrate-forming region away from sea floor by increasing the circulation rate. The decrease in gas volume fraction in the annulus due to hydrate formation reduces pit gain, which can delay the detection of well kick and increase the risk of hydrate plugging in lines. Caution is needed when a well is monitored for gas kick at a relatively low gas production rate, because the possibility of hydrate presence is much greater than that at a relatively high production rate. The shut-in casing pressure cannot reflect the gas kick due to hydrate formation, which increases with time.
