The internal pressure within fission gas bubbles(FGBs)in irradiated nuclear fuels drives mechanical interactions with the surrounding fuel skeleton.To investigate the micromechanical stress fields in irradiated nuclea...The internal pressure within fission gas bubbles(FGBs)in irradiated nuclear fuels drives mechanical interactions with the surrounding fuel skeleton.To investigate the micromechanical stress fields in irradiated nuclear fuels containing pressurized FGBs,a mechanical constitutive model for the equivalent solid of FGBs was developed and validated.This model was based on the modified Van der Waals equation,incorporating the effects of surface tension.Using this model,the micromechanical fields in irradiated U-10Mo fuels with randomly distributed FGBs were calculated during uniaxial tensile testing via the finite element(FE)method.The macroscopic elastic constants of the irradiated U-10Mo fuels were then derived using homogenization theory,and the influences of bubble pressure,bubble size,and porosity on these constants were examined.Results show that adjacent FGBs exhibit mechanical interactions,which leads to distinct stress concentrations in the surrounding fuel skeleton.The macroscopic elastic constants of irradiated U-10Mo fuels decrease with increasing the macroscopic porosity,which can be quantitatively described by the Mori-Tanaka model.In contrast,bubble pressure and size have negligible effects on these constants.展开更多
Sound speed is essential for leakage detection in liquid pipelines when using acoustic methods,which can be significantly influenced by gas bubbles generated from leakage.The propagation characteristics and mechanism ...Sound speed is essential for leakage detection in liquid pipelines when using acoustic methods,which can be significantly influenced by gas bubbles generated from leakage.The propagation characteristics and mechanism of acoustic waves in horizontal liquid pipelines containing gas bubbles are studied in detail in the present paper.The effect of sound wave frequency,bubble size and bubble distribution pattern on sound speed is studied through numerical simulations.The results show that the acoustic wave generated by leakage of liquid pipelines containing gas bubbles is a multi-frequency signal,and the energy of the signal is mainly concentrated within 200 Hz.In the low-frequency range,the propagation of sound waves has almost no dispersion in bubbly liquid.Sound speed at a certain void fraction is not constant,which is related to the bubble size and distribution pattern.The bubble size affects the gasliquid heat transfer equilibrium,during which sound speed is affected.For this reason,a thermodynamic correction factor is proposed,which enables the accuracy of the sound speed calculation to reach98.2%.What's more,sound speed increases non-linearly with the reduction of the bubble distribution space in the pipeline axial direction.This paper establishes a theoretical calculation model of sound speed based on the bubble distribution pattern in the pipeline axial direction,which is in good agreement with the numerical calculation results.The results of this paper provide the basis for applying acoustic leak detection technology in liquid pipelines containing gas bubbles.展开更多
Numerous irradiation-induced gas bubbles are created in the nuclear fuel during irradiation, leading to the change of microstructure and the degradation of mechanical and thermal properties. The grain size of fuel is ...Numerous irradiation-induced gas bubbles are created in the nuclear fuel during irradiation, leading to the change of microstructure and the degradation of mechanical and thermal properties. The grain size of fuel is one of the important factors affecting bubble evolution. In current study, we first predict the thermodynamic behaviors of point defects as well as the interplay between vacancy and gas atom in both UO_(2) and U_(3)Si_(2) according to ab initio approach. Then, we establish the irradiation-induced bubble phase-field model to investigate the formation and evolution of intra-and inter-granular gas bubbles. The effects of fission rate and temperature on the evolutions of bubble morphologies in UO_(2) and U_(3)Si_(2) have been revealed. Especially, a comparison of porosities under different grain sizes is examined and analyzed. To understand the thermal conductivity as functions of grain size and porosity, the heat transfer capability of U_(3)Si_(2) is evaluated.展开更多
A method to investigate the effect of gas bubble on cell voltage oscillations was established. The whole aluminum electrolysis cell was treated as a resistance circuit, and the dynamic simulation of the cell equivalen...A method to investigate the effect of gas bubble on cell voltage oscillations was established. The whole aluminum electrolysis cell was treated as a resistance circuit, and the dynamic simulation of the cell equivalent circuit was modeled with Matlab/Simulink simulation software. The time-series signals of cell voltage and anode current were obtained under different bubble conditions, and analyzed by spectral and statistical analysis methods. The simulation results show that higher bubble release frequency has a significant effect on the cell voltage oscillations. When the bubble coverage of one anode block exceeds 80%, the cell voltage may exceed its normal fluctuation amplitude. The simulation also proves that the anode effect detected by computer in actual production is mainly the whole cell anode effect.展开更多
In order to understand the dominant factors of the physical properties of ice in ice thermodynamics and mechanics, in-situ observations of ice growth and decay processes were carried out. Two samplings were conducted ...In order to understand the dominant factors of the physical properties of ice in ice thermodynamics and mechanics, in-situ observations of ice growth and decay processes were carried out. Two samplings were conducted in the fast and steady ice growth stages. Ice pieces were used to observe ice crystals and gas bubbles in ice, and to measure the ice density. Vertical profiles of the type and size of ice crystals, shape and size of gas bubbles, and gas bubble content, as well as the ice density, were obtained. The results show that the upper layer of the ice pieces is granular ice and the lower layer is columnar ice; the average crystal size increases with the ice depth and remains steady in the fast and steady ice growth stages; the shape of gas bubbles in the upper layer of ice pieces is spherical with higher total content, and the shape in the middle and lower layers is cylinder with lower total content; the gas bubble size and content vary with the ice growth stage; and the ice density decreases with the increase of the gas bubble content.展开更多
The influences of the acoustic impedance and shock strength on the jet formation in shock-heavy gas bubble interaction are numerically studied in this work. The process of a shock interacting with a krypton or a SF6 b...The influences of the acoustic impedance and shock strength on the jet formation in shock-heavy gas bubble interaction are numerically studied in this work. The process of a shock interacting with a krypton or a SF6 bubble is studied by the numerical method VAS2D. As a validation, the experiments of a SF6 bubble accelerated by a planar shock were performed. The results indicate that, due to the mismatch of acoustic impedance, the way of jet formation in heavy gas bubble with different species is diversified under the same initial condition. With respect to the same bubble, the manner of jet formation is also distinctly different under different shock strengths. The disparities of the acoustic impedance result in different effects of shock focusing in the bubble, and different behaviors of shock wave inside and outside the bubble. The analyses of the wave pattern and the pressure variation indicate that the jet formation is closely associated with the pressure perturbation. Moreover, the analy- sis of the vorticity deposition, and comparisons of circulation and baroclinic torque show that the baroclinic vorticity also contributes to the jet formation. It is concluded that the pres- sure perturbation and baroclinic vorticity deposition are the two dominant factors for the jet formation in shock-heavy gas bubble interaction.展开更多
In this study,the effect of rotating gas bubble stirring treatment on the microstructures of semi-solid AZ91-2Ca alloy was investigated.The semi-solid slurry was produced by injecting fine gas bubbles into the melt th...In this study,the effect of rotating gas bubble stirring treatment on the microstructures of semi-solid AZ91-2Ca alloy was investigated.The semi-solid slurry was produced by injecting fine gas bubbles into the melt through a rotating steel diffuser during solidification,and the samples of semi-solid slurry were taken by the rapid quenching method.The results show that fine and sphericalα-Mg particles can be obtained under rotating gas bubble stirring treatment.The process parameters such as gas flow rate,cooling rate and rotation speed have significant influence on the morphology of primary solid particles.After rotating gas bubble stirring treatment,the higher the particle density,the finer and rounder the primaryα-Mg particles.The formation of numerous solid particles is due to the combination mechanisms of copious nucleation and dendrite fragmentation.展开更多
A novel technique of introducing gas bubble stirring during solidification was studied to prepare Al-Si semi-solid slurry. The microstructure evolution of the slurry during slow cooling process after stirring was inve...A novel technique of introducing gas bubble stirring during solidification was studied to prepare Al-Si semi-solid slurry. The microstructure evolution of the slurry during slow cooling process after stirring was investigated. The effects of the solidification rate on the microstructure of the semi-solid slurry were investigated under three different solidification conditions. The results show that fine non-dendritic slurry can be obtained using the gas bubble stirring method. Ripening and coarsening of primary Al grains are observed during the slow cooling process, and at last coarsened eutectic Si appears. Primary Al grains with different sizes and eutectic Si are obtained, corresponding to three different solidification rates.展开更多
AIM:To investigate the incidence and the predisposing factors of anterior chamber(AC)gas bubbles during femtosecond laser(FS)flap creation for laser in situ keratomileusis(LASIK).METHODS:All patients who underwent FS-...AIM:To investigate the incidence and the predisposing factors of anterior chamber(AC)gas bubbles during femtosecond laser(FS)flap creation for laser in situ keratomileusis(LASIK).METHODS:All patients who underwent FS-LASIK surgery at CMU LASIK Center between January 2013 and May 2016 were retrospective reviewed.Preoperative and intraoperative data including keratometry,white-towhite(WTW)corneal diameter,flap parameters(diameter,thickness,hinge position,and tunnel length)and pulse energy were reviewed and compared between incident group and control group.To determine the risk factors,univariate and multivariate conditional logistic regression were used;the eye was unit of analysis.RESULTS:The incidence of AC gas bubbles was 1.6%(22 out of 1378 eyes).The median WTW in the AC bubbles group was 11.5 mm(range 11.1-12.1),which was significantly different from the control group(11.7 mm,range 10.5-12.8,P=0.021).The result of the median WTW minus the flap diameter in the AC bubbles group was 2.5 mm(range 2.1-3.2),which was statistically different to the control group(2.7 mm,range 1.5-3.8,P=0.008).The logistic regression analysis showed that the result of the WTW minus the flap diameter in the AC bubbles group had an adjusted odds ratio of 0.204(95%CI;0.056-0.747,P=0.016).CONCLUSION:Development of AC gas bubbles during FS flap creation is not an uncommon event in Asian eyes which typically have a small WTW.The flap diameter when adjusted relatively to the WTW is a predisposing factor to the possibility of AC gas bubbles occurrence.展开更多
This paper presents an algorithm of automatic bubble image segmentation using the improved ant colony optimization methodology. The ant colony optimization method is a metaheuristic algorithm, and has been applied in ...This paper presents an algorithm of automatic bubble image segmentation using the improved ant colony optimization methodology. The ant colony optimization method is a metaheuristic algorithm, and has been applied in many fields. To reveal the versatility and appropriateness of automatic bubble image segmentation, the fuzzy clustering analysis method is employed in ant colony optimization algorithm. Compared with the well-known image feature extraction operators such as SUSAN and Canny, the proposed method can comparatively suitable to extract the gas bubbles image edge features. The experimental results show that the proposed method is effective and reliable, and can achieve satisfactory image edge extraction effect.展开更多
The gas and water flows during an underwater missile launch are numerically studied. For the gas flow, the explicit difference scheme of Non-oscillation and Non-free-parameter Dissipation (NND) is utilized to solve th...The gas and water flows during an underwater missile launch are numerically studied. For the gas flow, the explicit difference scheme of Non-oscillation and Non-free-parameter Dissipation (NND) is utilized to solve the Euler equations for compressible fluids in the body-fitted coordinates. For the water flow, the Hess-Smith method is employed to solve the Laplace equation for the velocity potential of irrotational water flows based on the potential theory and the boundary element method. The hybrid Eulerian-Lagrangian formulation for the free boundary conditions is used to compute the changes of the free surface of the exhausted gas bubble in time stepping. On the free surface of the exhausted gas bubble, the matched conditions of both the normal velocities and pressures are satisfied. From the numerical simulation, it is found that the exhausted gas bubble grows more rapidly in the axial direction than in the radial direction and the bubble will shrink at its "neck" finally. Numerical results of the movement of the shock wave and the distribution of the Mach number and the gas pressure within the bubble were presented, which reveals that at some time, the gas flow in the Laval nozzle is subsonic and the gas pressure in the nozzle is very high. Influences of various initial missile velocities and chamber total pressures and water depths on both the time interval when the gas flow in the nozzle is subsonic and the peak of the gas pressure at the nozzle end were discussed. It was suggested that a reasonable adjustment of the chamber total pressure can improve the performance of the engine during the underwater launch of missiles.展开更多
Interaction of a strong converging shock wave with an SF6 gas bubble is studied, focusing on the effects of shock intensity and shock shape on interface evolution. Experimentally, the converging shock wave is generate...Interaction of a strong converging shock wave with an SF6 gas bubble is studied, focusing on the effects of shock intensity and shock shape on interface evolution. Experimentally, the converging shock wave is generated by shock dynamics theory and the gas bubble is created by soap film technique. The post-shock flow field is captured by a schlieren photography combined with a high-speed video camera. Besides, a three-dimensional program is adopted to provide more details of flow field. After the strong converging shock wave impact, a wide and pronged outward jet, which differs from that in planar shock or weak converging shock condition, is derived from the downstream interface pole. This specific phenomenon is considered to be closely associated with shock intensity and shock curvature. Disturbed by the gas bubble, the converging shocks approaching the convergence center have polygonal shapes, and the relationship between shock intensity and shock radius verifies the applicability of polygonal converging shock theory. Subsequently, the motion of upstream point is discussed, and a modified nonlinear theory considering rarefaction wave and high amplitude effects is proposed. In addition, the effects of shock shape on interface morphology and interface scales are elucidated. These results indicate that the shape as well as shock strength plays an important role in interface evolution.展开更多
Electrochemical gas evolution reactions are common but essential in many electrochemical processes including water electrolysis.During these processes,gas bubbles are constantly nucleating on reaction interfaces in el...Electrochemical gas evolution reactions are common but essential in many electrochemical processes including water electrolysis.During these processes,gas bubbles are constantly nucleating on reaction interfaces in electrolyte and consequently exert an impact on catalysts and the performance.In the past few decades,extensive studies have been conducted to characterize bubbles with emerging advanced technologies,manage behaviors of bubbles,and apply bubbles to various domains.In this review,we summarize representative discoveries as well as recent advancements in electrochemical gas evolution reactions from the perspective of gas bubbles.Finally,we end up this review with a profound outlook on future research topics from the combination of experiments and theoretical techniques,non-negligible bubble effects,gravity-free situation,and reactions under practical industrial conditions.展开更多
For forced radial oscillations of gas bubbles in liquids, a more rigorous expression of the acoustic damping constant based on Keller＇s equation is developed. Comparison with those in published papers is also made. T...For forced radial oscillations of gas bubbles in liquids, a more rigorous expression of the acoustic damping constant based on Keller＇s equation is developed. Comparison with those in published papers is also made. The expression offered in this paper will improve the predictions of total damping constant in particular for high frequencies and large bubbles, i.e., large ωR0 / c1 （ ω is the frequency of driving sound field, Ro is the equilibrium bubble radius, c1 is the sound speed in the liquid）. Examples in ultrasound imaging and acoustical oceanography are demonstrated.展开更多
Single bubble sonoluminescence is a process of energy transformation from sound to light. Therefore the motion equations of near spherical vibration of a gas bubble in an incompressible and viscous liquid can be deduc...Single bubble sonoluminescence is a process of energy transformation from sound to light. Therefore the motion equations of near spherical vibration of a gas bubble in an incompressible and viscous liquid can be deduced by Lagrangian Equation with dissipation function when the bubble is considered as a vibrator surrounded by liquid. The analytical solutions in the bubble expanding, collapsing and rebounding stages can be obtained by solving these motion equations when some approximations are adopted. And the dynamic behaviors of the bubble in these three stages are discussed.展开更多
In response to the ongoing energy crisis,advancing the field of electrocatalytic water splitting is of utmost significance,necessitating the urgent development of high-performance,cost-effective,and durable hydrogen e...In response to the ongoing energy crisis,advancing the field of electrocatalytic water splitting is of utmost significance,necessitating the urgent development of high-performance,cost-effective,and durable hydrogen evolution reaction catalysts.But the generated gas bubble adherence to the electrode surface and sluggish separation contribute to significant energy loss,primarily due to the insufficient exposure of active sites,thus substantially hindering electrochemical performance.Here,we successfully developed a superaerophobic catalytic electrode by loading phosphorus-doped nickel metal(NiP_(x))onto various conductive substrates via an electrodeposition method.The electrode exhibits a unique surface structure,characterized by prominent surface fissures,which not only exposes additional active sites but also endows the electrode with superaerophobic properties.The NiP_(x)/Ti electrode demonstrates superior electrocatalytic activity for hydrogen evolution reaction,significantly outperforming a platinum plate,displaying an overpotential of mere 216 mV to achieve a current density of-500 mA cm^(-2) in 1 M KOH.Furthermore,the NiP_(x)/Ti electrode manifests outstanding durability and robustness during continuous electrolysis,maintaining stability at a current density of-10 mA cm^(-2) over a duration of 2000 h.Owing to the straightforward and scalable preparation methods,this highly efficient and stable NiP_(x)/Ti electrocatalyst offers a novel strategy for the development of industrial water electrolysis.展开更多
Some recent work on bubble dynamics and bubbly liquids is outlined. The problem of compressibility corrections to the equation of motion of the bubble radius is addressed. A precise method for the calculation of the b...Some recent work on bubble dynamics and bubbly liquids is outlined. The problem of compressibility corrections to the equation of motion of the bubble radius is addressed. A precise method for the calculation of the bubble internal pressure is described and some limit cases considered. Some numerical examples are included to illustrate the theoretical predictions. An experimental indication of the correctness of the theory is given by 'bubble-levitation' experiments. For bubbly liquids at small gas volume fractions results are shown for a 'shock-tube' problem and for the propagation of a sinusoidal pressure pulse through a thin layer of bubbly liquid.展开更多
This paper presents formulae and explanation about the growth of a convective gas bubble in the blood and other tissues of divers who surface too quickly, concentration distribution around the growing bubble is also p...This paper presents formulae and explanation about the growth of a convective gas bubble in the blood and other tissues of divers who surface too quickly, concentration distribution around the growing bubble is also presented. The formulae are valid all over the growth stages, i.e. under variable ambient pressure while the diver is ascending, and under constant ambient pressure at diving stops or at sea level. The mathematical model is solved analytically by using the method of combined variables. The growth process is affected by tissue diffusivity, concentration constant and the initial void fraction, which is the dominant parameter. Results show that, the time of the complete growth, in the convective growth model, is shorter than those earlier presented by Mohammadein and Mohamed [Concentration distribution around a growing gas bubble in tissue, Math. Biosci. 225（1） （2010） 11-17] and Srinivasan et al. [Mathematical models of diffusion- limited gas bubble dynamics in tissue, J. Appl. Physiol. 86 （1999） 732-741] for the growth of a stationary gas bubble, this explains the effect of bubble motion on consuming the oversaturated dissolved gas from the tissue into growing bubble which leads to increment in the growth rate to be more than those presented in the previous stationary models.展开更多
Understanding the evolution of microstructures in nuclear fuels under high-burn-up conditions is critical for extending fuel refueling cycles and enhancing nuclear reactor safety.In this study,a phase-field model is p...Understanding the evolution of microstructures in nuclear fuels under high-burn-up conditions is critical for extending fuel refueling cycles and enhancing nuclear reactor safety.In this study,a phase-field model is proposed to examine the evolution of high-burn-up structures in polycrystalline UO_(2).The formation and growth of recrystallized grains were initially investigated.It was demonstrated that recrystallization kinetics adhere to the Kolmogorov–Johnson–Mehl–Avrami(KJMA)equation,and that recrystallization represents a process of free-energy reduction.Subsequently,the microstructural evolution in UO_(2) was analyzed as the burn up increased.Gas bubbles acted as additional nucleation sites,thereby augmenting the recrystallization kinetics,whereas the presence of recrystallized grains accelerated bubble growth by increasing the number of grain boundaries.The observed variations in the recrystallization kinetics and porosity with burn-up closely align with experimental findings.Furthermore,the influence of grain size on microstructure evolution was investigated.Larger grain sizes were found to decrease porosity and the occurrence of high-burn-up structures.展开更多
The semi-solid slurry of AZ91 D magnesium alloy was prepared by gas bubbling process.The effect of processing parameters,including gas flow rate,cooling rate and stirring end temperature,on microstructure of AZ91 D se...The semi-solid slurry of AZ91 D magnesium alloy was prepared by gas bubbling process.The effect of processing parameters,including gas flow rate,cooling rate and stirring end temperature,on microstructure of AZ91 D semi-solid slurry was investigated.With increasing the gas flow rate from 0 to 5 L/min,the average size of primary α-Mg particles decreases from 119.1 to77.2μm and the average shape factor increases continuously from 0.1 to 0.596.The formation of non-dendritic primary α-Mg particles during gas bubbling is the result of combined effects of dendrite fragmentation and copious nucleation.With increasing the cooling rate from 3.6 to 14.6℃/min,the average particle size of primary α-Mg phase decreases from 105.0 to 68.1μm while the average shape factor peaks at 9.1℃/min.Both high and low cooling rates can induce dendritic growth of primary α-Mg particles.Changing the stirring end temperature from 590 to 595℃ has little effect on the average size and shape factor of primary α-Mg particles in AZ91 D semi-solid slurry.The insensitivity of semi-solid microstructures to the stirring end temperature is attributed to the sufficient quantity of primary particles formed in the melt.展开更多
基金National Natural Science Foundation of China(12135008,12132005)。
文摘The internal pressure within fission gas bubbles(FGBs)in irradiated nuclear fuels drives mechanical interactions with the surrounding fuel skeleton.To investigate the micromechanical stress fields in irradiated nuclear fuels containing pressurized FGBs,a mechanical constitutive model for the equivalent solid of FGBs was developed and validated.This model was based on the modified Van der Waals equation,incorporating the effects of surface tension.Using this model,the micromechanical fields in irradiated U-10Mo fuels with randomly distributed FGBs were calculated during uniaxial tensile testing via the finite element(FE)method.The macroscopic elastic constants of the irradiated U-10Mo fuels were then derived using homogenization theory,and the influences of bubble pressure,bubble size,and porosity on these constants were examined.Results show that adjacent FGBs exhibit mechanical interactions,which leads to distinct stress concentrations in the surrounding fuel skeleton.The macroscopic elastic constants of irradiated U-10Mo fuels decrease with increasing the macroscopic porosity,which can be quantitatively described by the Mori-Tanaka model.In contrast,bubble pressure and size have negligible effects on these constants.
基金supported by the National Natural Science Foundation of China[grant number 52274066]。
文摘Sound speed is essential for leakage detection in liquid pipelines when using acoustic methods,which can be significantly influenced by gas bubbles generated from leakage.The propagation characteristics and mechanism of acoustic waves in horizontal liquid pipelines containing gas bubbles are studied in detail in the present paper.The effect of sound wave frequency,bubble size and bubble distribution pattern on sound speed is studied through numerical simulations.The results show that the acoustic wave generated by leakage of liquid pipelines containing gas bubbles is a multi-frequency signal,and the energy of the signal is mainly concentrated within 200 Hz.In the low-frequency range,the propagation of sound waves has almost no dispersion in bubbly liquid.Sound speed at a certain void fraction is not constant,which is related to the bubble size and distribution pattern.The bubble size affects the gasliquid heat transfer equilibrium,during which sound speed is affected.For this reason,a thermodynamic correction factor is proposed,which enables the accuracy of the sound speed calculation to reach98.2%.What's more,sound speed increases non-linearly with the reduction of the bubble distribution space in the pipeline axial direction.This paper establishes a theoretical calculation model of sound speed based on the bubble distribution pattern in the pipeline axial direction,which is in good agreement with the numerical calculation results.The results of this paper provide the basis for applying acoustic leak detection technology in liquid pipelines containing gas bubbles.
基金Project supported by the National Natural Science Foundation of China (Grant Nos.U2167217,12205286,and 11905025)the National MCF Energy Research and Development Program of China (Grant No.2018YFE0308105)。
文摘Numerous irradiation-induced gas bubbles are created in the nuclear fuel during irradiation, leading to the change of microstructure and the degradation of mechanical and thermal properties. The grain size of fuel is one of the important factors affecting bubble evolution. In current study, we first predict the thermodynamic behaviors of point defects as well as the interplay between vacancy and gas atom in both UO_(2) and U_(3)Si_(2) according to ab initio approach. Then, we establish the irradiation-induced bubble phase-field model to investigate the formation and evolution of intra-and inter-granular gas bubbles. The effects of fission rate and temperature on the evolutions of bubble morphologies in UO_(2) and U_(3)Si_(2) have been revealed. Especially, a comparison of porosities under different grain sizes is examined and analyzed. To understand the thermal conductivity as functions of grain size and porosity, the heat transfer capability of U_(3)Si_(2) is evaluated.
基金Project(2012BAE08B09)supported by the National Key Technology R&D Program of China
文摘A method to investigate the effect of gas bubble on cell voltage oscillations was established. The whole aluminum electrolysis cell was treated as a resistance circuit, and the dynamic simulation of the cell equivalent circuit was modeled with Matlab/Simulink simulation software. The time-series signals of cell voltage and anode current were obtained under different bubble conditions, and analyzed by spectral and statistical analysis methods. The simulation results show that higher bubble release frequency has a significant effect on the cell voltage oscillations. When the bubble coverage of one anode block exceeds 80%, the cell voltage may exceed its normal fluctuation amplitude. The simulation also proves that the anode effect detected by computer in actual production is mainly the whole cell anode effect.
基金supported by the National Natural Science Foundation of China (Grant No.50879008)the Open Fund of State Key Laboratory of Frozen Soil Engineering (Grant No. SKLFSE200904)+1 种基金the Vilho,Yrj and Kalle Visl Fund of the Finnish Academy of Sciences and Lettersthe Norwegian Research Council Project AMORA (Grant No.193592/S30)
文摘In order to understand the dominant factors of the physical properties of ice in ice thermodynamics and mechanics, in-situ observations of ice growth and decay processes were carried out. Two samplings were conducted in the fast and steady ice growth stages. Ice pieces were used to observe ice crystals and gas bubbles in ice, and to measure the ice density. Vertical profiles of the type and size of ice crystals, shape and size of gas bubbles, and gas bubble content, as well as the ice density, were obtained. The results show that the upper layer of the ice pieces is granular ice and the lower layer is columnar ice; the average crystal size increases with the ice depth and remains steady in the fast and steady ice growth stages; the shape of gas bubbles in the upper layer of ice pieces is spherical with higher total content, and the shape in the middle and lower layers is cylinder with lower total content; the gas bubble size and content vary with the ice growth stage; and the ice density decreases with the increase of the gas bubble content.
基金supported by the National Natural Science Foundation of China (10972214 and 11172278)the Fundamental Research Funds for the Central Universities (WK2090050014)
文摘The influences of the acoustic impedance and shock strength on the jet formation in shock-heavy gas bubble interaction are numerically studied in this work. The process of a shock interacting with a krypton or a SF6 bubble is studied by the numerical method VAS2D. As a validation, the experiments of a SF6 bubble accelerated by a planar shock were performed. The results indicate that, due to the mismatch of acoustic impedance, the way of jet formation in heavy gas bubble with different species is diversified under the same initial condition. With respect to the same bubble, the manner of jet formation is also distinctly different under different shock strengths. The disparities of the acoustic impedance result in different effects of shock focusing in the bubble, and different behaviors of shock wave inside and outside the bubble. The analyses of the wave pattern and the pressure variation indicate that the jet formation is closely associated with the pressure perturbation. Moreover, the analy- sis of the vorticity deposition, and comparisons of circulation and baroclinic torque show that the baroclinic vorticity also contributes to the jet formation. It is concluded that the pres- sure perturbation and baroclinic vorticity deposition are the two dominant factors for the jet formation in shock-heavy gas bubble interaction.
基金This project is sponsored by National Natural Science Foundation of China(No.51275295)Funded Projects of SAST-SJTU Joint Research Centre of Advanced Aerospace Technology(No.USCAST2012-15)Research Fund for the Doctoral Program of Higher Education of China(No.20120073120011).
文摘In this study,the effect of rotating gas bubble stirring treatment on the microstructures of semi-solid AZ91-2Ca alloy was investigated.The semi-solid slurry was produced by injecting fine gas bubbles into the melt through a rotating steel diffuser during solidification,and the samples of semi-solid slurry were taken by the rapid quenching method.The results show that fine and sphericalα-Mg particles can be obtained under rotating gas bubble stirring treatment.The process parameters such as gas flow rate,cooling rate and rotation speed have significant influence on the morphology of primary solid particles.After rotating gas bubble stirring treatment,the higher the particle density,the finer and rounder the primaryα-Mg particles.The formation of numerous solid particles is due to the combination mechanisms of copious nucleation and dendrite fragmentation.
基金Project(50775085)supported by the National Natural Science Foundation of ChinaProject(M2009061)supported by Special Fund for Basic Research and Operating Expenses of Central College,ChinaProject(2008A610049)supported by the Natural Science Foundation of Ningbo City,China
文摘A novel technique of introducing gas bubble stirring during solidification was studied to prepare Al-Si semi-solid slurry. The microstructure evolution of the slurry during slow cooling process after stirring was investigated. The effects of the solidification rate on the microstructure of the semi-solid slurry were investigated under three different solidification conditions. The results show that fine non-dendritic slurry can be obtained using the gas bubble stirring method. Ripening and coarsening of primary Al grains are observed during the slow cooling process, and at last coarsened eutectic Si appears. Primary Al grains with different sizes and eutectic Si are obtained, corresponding to three different solidification rates.
文摘AIM:To investigate the incidence and the predisposing factors of anterior chamber(AC)gas bubbles during femtosecond laser(FS)flap creation for laser in situ keratomileusis(LASIK).METHODS:All patients who underwent FS-LASIK surgery at CMU LASIK Center between January 2013 and May 2016 were retrospective reviewed.Preoperative and intraoperative data including keratometry,white-towhite(WTW)corneal diameter,flap parameters(diameter,thickness,hinge position,and tunnel length)and pulse energy were reviewed and compared between incident group and control group.To determine the risk factors,univariate and multivariate conditional logistic regression were used;the eye was unit of analysis.RESULTS:The incidence of AC gas bubbles was 1.6%(22 out of 1378 eyes).The median WTW in the AC bubbles group was 11.5 mm(range 11.1-12.1),which was significantly different from the control group(11.7 mm,range 10.5-12.8,P=0.021).The result of the median WTW minus the flap diameter in the AC bubbles group was 2.5 mm(range 2.1-3.2),which was statistically different to the control group(2.7 mm,range 1.5-3.8,P=0.008).The logistic regression analysis showed that the result of the WTW minus the flap diameter in the AC bubbles group had an adjusted odds ratio of 0.204(95%CI;0.056-0.747,P=0.016).CONCLUSION:Development of AC gas bubbles during FS flap creation is not an uncommon event in Asian eyes which typically have a small WTW.The flap diameter when adjusted relatively to the WTW is a predisposing factor to the possibility of AC gas bubbles occurrence.
基金Sponsored by the"Liaoning Bai Qian Wan"Talents Program (Grant No.2007-186-25)the Program of Scientific Research Project of Liaoning Province Education Commission (Grant No.LS2010046)the National Commonweal Industry Scientific Research Project (Grant No.201003024)
文摘This paper presents an algorithm of automatic bubble image segmentation using the improved ant colony optimization methodology. The ant colony optimization method is a metaheuristic algorithm, and has been applied in many fields. To reveal the versatility and appropriateness of automatic bubble image segmentation, the fuzzy clustering analysis method is employed in ant colony optimization algorithm. Compared with the well-known image feature extraction operators such as SUSAN and Canny, the proposed method can comparatively suitable to extract the gas bubbles image edge features. The experimental results show that the proposed method is effective and reliable, and can achieve satisfactory image edge extraction effect.
文摘The gas and water flows during an underwater missile launch are numerically studied. For the gas flow, the explicit difference scheme of Non-oscillation and Non-free-parameter Dissipation (NND) is utilized to solve the Euler equations for compressible fluids in the body-fitted coordinates. For the water flow, the Hess-Smith method is employed to solve the Laplace equation for the velocity potential of irrotational water flows based on the potential theory and the boundary element method. The hybrid Eulerian-Lagrangian formulation for the free boundary conditions is used to compute the changes of the free surface of the exhausted gas bubble in time stepping. On the free surface of the exhausted gas bubble, the matched conditions of both the normal velocities and pressures are satisfied. From the numerical simulation, it is found that the exhausted gas bubble grows more rapidly in the axial direction than in the radial direction and the bubble will shrink at its "neck" finally. Numerical results of the movement of the shock wave and the distribution of the Mach number and the gas pressure within the bubble were presented, which reveals that at some time, the gas flow in the Laval nozzle is subsonic and the gas pressure in the nozzle is very high. Influences of various initial missile velocities and chamber total pressures and water depths on both the time interval when the gas flow in the nozzle is subsonic and the peak of the gas pressure at the nozzle end were discussed. It was suggested that a reasonable adjustment of the chamber total pressure can improve the performance of the engine during the underwater launch of missiles.
基金supported by the National Natural Science Foundation of China(Grant Nos.U1530103,and 11621202)Science Challenge Project(Grant No.TZ2016001)
文摘Interaction of a strong converging shock wave with an SF6 gas bubble is studied, focusing on the effects of shock intensity and shock shape on interface evolution. Experimentally, the converging shock wave is generated by shock dynamics theory and the gas bubble is created by soap film technique. The post-shock flow field is captured by a schlieren photography combined with a high-speed video camera. Besides, a three-dimensional program is adopted to provide more details of flow field. After the strong converging shock wave impact, a wide and pronged outward jet, which differs from that in planar shock or weak converging shock condition, is derived from the downstream interface pole. This specific phenomenon is considered to be closely associated with shock intensity and shock curvature. Disturbed by the gas bubble, the converging shocks approaching the convergence center have polygonal shapes, and the relationship between shock intensity and shock radius verifies the applicability of polygonal converging shock theory. Subsequently, the motion of upstream point is discussed, and a modified nonlinear theory considering rarefaction wave and high amplitude effects is proposed. In addition, the effects of shock shape on interface morphology and interface scales are elucidated. These results indicate that the shape as well as shock strength plays an important role in interface evolution.
基金supported by the National Natural Science Foundation of China(No.51902101)the Youth Natural Science Foundation of Hunan Province(No.2021JJ40044)+2 种基金Natural Science Foundation of Jiangsu Province(No.BK20201381)Science Foundation of Nanjing University of Posts and Telecommunications(Nos.NY219144 and NY221046)the National College Student Innovation and Entrepreneurship Training Program(No.202210293171K).
文摘Electrochemical gas evolution reactions are common but essential in many electrochemical processes including water electrolysis.During these processes,gas bubbles are constantly nucleating on reaction interfaces in electrolyte and consequently exert an impact on catalysts and the performance.In the past few decades,extensive studies have been conducted to characterize bubbles with emerging advanced technologies,manage behaviors of bubbles,and apply bubbles to various domains.In this review,we summarize representative discoveries as well as recent advancements in electrochemical gas evolution reactions from the perspective of gas bubbles.Finally,we end up this review with a profound outlook on future research topics from the combination of experiments and theoretical techniques,non-negligible bubble effects,gravity-free situation,and reactions under practical industrial conditions.
基金supported by the UK EPSRC WIMRC(Grant No.RESCM 9219)the EPSRC WIMRC Ph.D.studentship(Grant No.RESCM9217)
文摘For forced radial oscillations of gas bubbles in liquids, a more rigorous expression of the acoustic damping constant based on Keller＇s equation is developed. Comparison with those in published papers is also made. The expression offered in this paper will improve the predictions of total damping constant in particular for high frequencies and large bubbles, i.e., large ωR0 / c1 （ ω is the frequency of driving sound field, Ro is the equilibrium bubble radius, c1 is the sound speed in the liquid）. Examples in ultrasound imaging and acoustical oceanography are demonstrated.
基金This project is supported by the Key Program ofthe National Science Foundation ofChina(Grant 19934001 and 59738150)and Doctoral Foundation of Education Ministry of China.
文摘Single bubble sonoluminescence is a process of energy transformation from sound to light. Therefore the motion equations of near spherical vibration of a gas bubble in an incompressible and viscous liquid can be deduced by Lagrangian Equation with dissipation function when the bubble is considered as a vibrator surrounded by liquid. The analytical solutions in the bubble expanding, collapsing and rebounding stages can be obtained by solving these motion equations when some approximations are adopted. And the dynamic behaviors of the bubble in these three stages are discussed.
基金financially supported by the National Natural Science Foundation of China(52375204)the World First Class University and First Class Academic Discipline Construction Funding 2023(0206023GH0202,0206023SH0201)+1 种基金the Shenzhen Science and Technology R&D Funds(20200813100712001)the Fundamental Research Funds for the Central Universities(0604023GH0202079,0604023SH0201079)
文摘In response to the ongoing energy crisis,advancing the field of electrocatalytic water splitting is of utmost significance,necessitating the urgent development of high-performance,cost-effective,and durable hydrogen evolution reaction catalysts.But the generated gas bubble adherence to the electrode surface and sluggish separation contribute to significant energy loss,primarily due to the insufficient exposure of active sites,thus substantially hindering electrochemical performance.Here,we successfully developed a superaerophobic catalytic electrode by loading phosphorus-doped nickel metal(NiP_(x))onto various conductive substrates via an electrodeposition method.The electrode exhibits a unique surface structure,characterized by prominent surface fissures,which not only exposes additional active sites but also endows the electrode with superaerophobic properties.The NiP_(x)/Ti electrode demonstrates superior electrocatalytic activity for hydrogen evolution reaction,significantly outperforming a platinum plate,displaying an overpotential of mere 216 mV to achieve a current density of-500 mA cm^(-2) in 1 M KOH.Furthermore,the NiP_(x)/Ti electrode manifests outstanding durability and robustness during continuous electrolysis,maintaining stability at a current density of-10 mA cm^(-2) over a duration of 2000 h.Owing to the straightforward and scalable preparation methods,this highly efficient and stable NiP_(x)/Ti electrocatalyst offers a novel strategy for the development of industrial water electrolysis.
文摘Some recent work on bubble dynamics and bubbly liquids is outlined. The problem of compressibility corrections to the equation of motion of the bubble radius is addressed. A precise method for the calculation of the bubble internal pressure is described and some limit cases considered. Some numerical examples are included to illustrate the theoretical predictions. An experimental indication of the correctness of the theory is given by 'bubble-levitation' experiments. For bubbly liquids at small gas volume fractions results are shown for a 'shock-tube' problem and for the propagation of a sinusoidal pressure pulse through a thin layer of bubbly liquid.
文摘This paper presents formulae and explanation about the growth of a convective gas bubble in the blood and other tissues of divers who surface too quickly, concentration distribution around the growing bubble is also presented. The formulae are valid all over the growth stages, i.e. under variable ambient pressure while the diver is ascending, and under constant ambient pressure at diving stops or at sea level. The mathematical model is solved analytically by using the method of combined variables. The growth process is affected by tissue diffusivity, concentration constant and the initial void fraction, which is the dominant parameter. Results show that, the time of the complete growth, in the convective growth model, is shorter than those earlier presented by Mohammadein and Mohamed [Concentration distribution around a growing gas bubble in tissue, Math. Biosci. 225（1） （2010） 11-17] and Srinivasan et al. [Mathematical models of diffusion- limited gas bubble dynamics in tissue, J. Appl. Physiol. 86 （1999） 732-741] for the growth of a stationary gas bubble, this explains the effect of bubble motion on consuming the oversaturated dissolved gas from the tissue into growing bubble which leads to increment in the growth rate to be more than those presented in the previous stationary models.
基金supported by the National Natural Science Foundation of China(Grant Nos.U20B2013 and 12205286)the National Key Research and Development Program of China(Grant No.2022YFB1902401)。
文摘Understanding the evolution of microstructures in nuclear fuels under high-burn-up conditions is critical for extending fuel refueling cycles and enhancing nuclear reactor safety.In this study,a phase-field model is proposed to examine the evolution of high-burn-up structures in polycrystalline UO_(2).The formation and growth of recrystallized grains were initially investigated.It was demonstrated that recrystallization kinetics adhere to the Kolmogorov–Johnson–Mehl–Avrami(KJMA)equation,and that recrystallization represents a process of free-energy reduction.Subsequently,the microstructural evolution in UO_(2) was analyzed as the burn up increased.Gas bubbles acted as additional nucleation sites,thereby augmenting the recrystallization kinetics,whereas the presence of recrystallized grains accelerated bubble growth by increasing the number of grain boundaries.The observed variations in the recrystallization kinetics and porosity with burn-up closely align with experimental findings.Furthermore,the influence of grain size on microstructure evolution was investigated.Larger grain sizes were found to decrease porosity and the occurrence of high-burn-up structures.
基金Project(51275295)supported by the National Natural Science Foundation of ChinaProjects(20120073120011,20130073110052)supported by the Research Fund for the Doctoral Program of Higher Education of China
文摘The semi-solid slurry of AZ91 D magnesium alloy was prepared by gas bubbling process.The effect of processing parameters,including gas flow rate,cooling rate and stirring end temperature,on microstructure of AZ91 D semi-solid slurry was investigated.With increasing the gas flow rate from 0 to 5 L/min,the average size of primary α-Mg particles decreases from 119.1 to77.2μm and the average shape factor increases continuously from 0.1 to 0.596.The formation of non-dendritic primary α-Mg particles during gas bubbling is the result of combined effects of dendrite fragmentation and copious nucleation.With increasing the cooling rate from 3.6 to 14.6℃/min,the average particle size of primary α-Mg phase decreases from 105.0 to 68.1μm while the average shape factor peaks at 9.1℃/min.Both high and low cooling rates can induce dendritic growth of primary α-Mg particles.Changing the stirring end temperature from 590 to 595℃ has little effect on the average size and shape factor of primary α-Mg particles in AZ91 D semi-solid slurry.The insensitivity of semi-solid microstructures to the stirring end temperature is attributed to the sufficient quantity of primary particles formed in the melt.
