A one dimensional model is developed for defective gap mode（DGM）with two types of boundary conditions：conducting mesh and conducting sleeve.For a periodically modulated system without defect,the normalized width of...A one dimensional model is developed for defective gap mode（DGM）with two types of boundary conditions：conducting mesh and conducting sleeve.For a periodically modulated system without defect,the normalized width of spectral gaps equals to the modulation factor,which is consistent with previous studies.For a periodic system with local defects introduced by the boundary conditions,it shows that the conducting-mesh-induced DGM is always well confined by spectral gaps while the conducting-sleeve-induced DGM is not.The defect location can be a useful tool to dynamically control the frequency and spatial periodicity of DGM inside spectral gaps.This controllability can be potentially applied to the interaction between gap eigenmodes and energetic particles in fusion plasmas,and optical microcavities and waveguides in photonic crystals.展开更多
This paper stuides numerically the model equation in a one dimensional defective photonic lattice by modifying the potential function to a periodic function. It is found that defect modes （DMs） can be regarded as Bl...This paper stuides numerically the model equation in a one dimensional defective photonic lattice by modifying the potential function to a periodic function. It is found that defect modes （DMs） can be regarded as Bloch modes which are excited from the extended photonie band-gap structure at Bloch wave-numbers with kx = 0. The DMs for both positive and negative defects are considered in this method.展开更多
With the full-vector plane-wave method （FVPWM） and the full-vector beam propagation method （FVBPM）, the dependences of the band-gap and mode characteristics on material index and cladding structure parameter in an...With the full-vector plane-wave method （FVPWM） and the full-vector beam propagation method （FVBPM）, the dependences of the band-gap and mode characteristics on material index and cladding structure parameter in anti- resonance guiding photonic crystal fibres （ARGPCFs） are sufficiently analysed. An ARGPCF operating in the near- infrared wavelength is shown. The influences of the high index cylinders, glass interstitial apexes and silica structure on the characteristics of band-gaps and modes are deeply investigated. The equivalent planar waveguide theory is used for analysing such an ARGPCF filled by the isotropic materials, and the resonance and the anti-resonance characteristics r：~n h~ w~｜] r^r~dlrtpd展开更多
The influence of an arc current on the discharge development and the arc modes of a single coil type axial magnetic field （AMF） electrode were investigated by a high-speed charge couple device （CCD） video camera i...The influence of an arc current on the discharge development and the arc modes of a single coil type axial magnetic field （AMF） electrode were investigated by a high-speed charge couple device （CCD） video camera in a long gap distance of 40 mm. The distribution of the axial magnetic field of the single coil type AMF electrode was computed. By computational results, the single coil type AMF electrode could generate higher axial magnetic flux density than the slot type AMF electrode. It was found that the single coil type AMF electrode could perform better than the slot type AMF electrode with the same designing parameters. And the development of the arc modes experienced diffuse mode, constricted but unstable mode, and constricted and stable mode with the amplitude of the arc current increasing. The correlation between the vacuum arc and the noise components of arc voltage was investigated too. The interruption capability could be known in a practical commercial vacuum interrupter by the test results in a demountable vacuum interrupter （DVC） with a electrode diameter of 50 mm and a gap distance of 40 mm.The test results could provide reference to design the high voltage vacuum interrupter adopting the single coil type AMF electrode.展开更多
This paper investigates the guided-mode characteristics of hollow-core photonic band-gap fibre （HC-PBGF） with interstitial holes fabricated by an improved twice stack-and-draw technique at visible wavelengths. Based...This paper investigates the guided-mode characteristics of hollow-core photonic band-gap fibre （HC-PBGF） with interstitial holes fabricated by an improved twice stack-and-draw technique at visible wavelengths. Based on the simulation model with interstitial holes, the influence of glass interstitial apexes on photonic band-gaps is discussed. The existing forms of guided-mode in part band gaps are shown by using the full-vector plane-wave method. In the experiment, the observed transmission spectrum corresponds to the part band gaps obtained by simulation. The fundamental and second-order guided-modes with mixture of yellow and green light are observed through choosing appropriate fibre length and adjusting coupling device. The loss mechanism of guided-modes in HC-PBGF is also discussed.展开更多
A theoretical model is developed for calculating the eigenmodes of the multi-gap resonant cavity. The structure of concern is a kind of ladder-type circuit, offering the advantages of easy fabrication, high characteri...A theoretical model is developed for calculating the eigenmodes of the multi-gap resonant cavity. The structure of concern is a kind of ladder-type circuit, offering the advantages of easy fabrication, high characteristic impedance （R/Q）, and thermal capacity in the millimeter wave to THz regime. The eigenfunction expansion method is used to establish the field expressions for the gaps and the coupling region. Then, the match conditions at the interface are employed, which leads to a group of complicate boundary equations in the form of an infinite series. To facilitate the mathematical treatments and perform a highly efficient calculation, these boundary equations are transformed into the algebraic forms through the matrix representations. Finally, the concise dispersion equation is obtained. The roots of the dispersion equation include both the axial modes in the gaps, which include the fundamental and the high-order modes, and the cavity modes in the coupling region. Extensive numerical results are presented and the behaviors of the multi-gap resonant cavity are examined.展开更多
The greenhouse effect of SFe is a great concern today. The development of high voltage vacuum circuit breakers becomes more important. The vacuum circuit breaker has minimum pollution to the environment. The vacuum in...The greenhouse effect of SFe is a great concern today. The development of high voltage vacuum circuit breakers becomes more important. The vacuum circuit breaker has minimum pollution to the environment. The vacuum interrupter is the key part of a vacuum circuit breaker. The interrupting characteristics in vacuum and arc-controlling techniue are the main problems to be solved for a longer gap distance in developing high voltage vacuum interrupters. To understand the vacuum arc characteristics and provide effective technique to control vacuum arc in a long gap distance, the arc mode transition of a cup-type axial magnetic field electrode is observed by a high-speed charge coupled device （CGD） video camera under different gap distances while the arc voltage and arc current are recorded. The controlling ability of the axial magnetic field on vacuum arc obviously decreases when the gap distance is longer than 40 ram. The noise components and mean value of the arc voltage significantly increase. The effective method for controlling the vacuum arc characteristics is provided by long gap distances based on the test results. The test results can be used as a reference to develop high voltage and large capacity vacuum interrupters.展开更多
Optical features of a semiconductor–dielectric photonic crystal are studied theoretically. Alternating layers of micrometer sized SiO2/In Sb slabs are considered as building blocks of the proposed ideal crystal. By i...Optical features of a semiconductor–dielectric photonic crystal are studied theoretically. Alternating layers of micrometer sized SiO2/In Sb slabs are considered as building blocks of the proposed ideal crystal. By inserting additional layers and disrupting the regularity, two more defective crystals are also proposed. Photonic band structure of the ideal crystal and its dependence on the structural parameters are explored at the first step. Transmittance of the defective crystals and its changes with the thicknesses of the layers are studied. After extracting the optimum values for the thicknesses of the unit cells of the crystals, the optical response of the proposed structures at different temperatures and incident angles are investigated. Changes of the defect layers’ induced mode(s) are discussed by taking into consideration of the temperature dependence of the In Sb layer permittivity. The results clearly reflect the high potential of the proposed crystals to be used at high temperature terahertz technology as a promising alternative to their electronic counterparts.展开更多
The mutual interaction of three different defects in photonic crystals is studied theoretically. A theoretical model based on the classical wave analogue of the tight-binding （TB） picture is applied to the structure...The mutual interaction of three different defects in photonic crystals is studied theoretically. A theoretical model based on the classical wave analogue of the tight-binding （TB） picture is applied to the structure. We obtain analytic expressions for the eigenfrequencies and eigenmodes, from which the transmissions at resonance are derived. Based on this, a new type of the photonic quantum-well structure is investigated and its possible application is discussed. The TB predictions are compared with the transfer matrix method simulation results.展开更多
This paper studies the dispersion characteristics of a modified photonic band-gap slow-wave structure with an open boundary by simulation and experiment. A mode launcher with a wheel radiator and a coupling probe is p...This paper studies the dispersion characteristics of a modified photonic band-gap slow-wave structure with an open boundary by simulation and experiment. A mode launcher with a wheel radiator and a coupling probe is presented to excite a pure TM01-like mode. The cold test and simulation results show that the TM01-like mode is effectively excited and no parasitic modes appear. The dispersion characteristics obtained from the cold test are in good agreement with the calculated results.展开更多
In this paper, the author proposed a methodology to reveal expected seismic activation places for coming years by a complex of forecasting parameters of a seismic mode. Areas in Uzbekistan where currently observed ano...In this paper, the author proposed a methodology to reveal expected seismic activation places for coming years by a complex of forecasting parameters of a seismic mode. Areas in Uzbekistan where currently observed anomalies in various parameters of a seismic mode has been revealed. By number of displayed abnormal signs the areas has been ranked based on probability of occurrence of strong earthquakes there. It has prepared schemes of the synoptic forecast of expected seismic activation places in case of occurrence of strong earthquakes in the Central-Asian region.展开更多
We show theoretically that range of reflection bands and defect modes inside the band gap can be tuned by using a one-dimensional tilted photonic crystal (TPC) structure. A TPC structure is similar to the conventional...We show theoretically that range of reflection bands and defect modes inside the band gap can be tuned by using a one-dimensional tilted photonic crystal (TPC) structure. A TPC structure is similar to the conventional PC structure with the only difference that in this case alternate layers are inclined at certain angle in the direction of periodicity of the structure. In order to obtain the reflectance spectra of the proposed structure transfer matrix method (TMM) has been employed. From the analysis of the reflectance curve, it is found that 100% reflectance range can be varied and enhanced by using TPC structure for both (TE- and TM-) polarizations. The enhancement in reflection bands increases as the tilt angle increases for both the polarizations and hence the enlarged omni-reflectance bands are obtained. Further, we study the properties of the defect modes in TPC structure by introducing the tilted defect at the different tilt angle. The results show that defect modes (tunneling modes) can be tuned at different wavelengths by changing the tilt angle of the structure without changing other parameters. Finally, the effect of variation thickness of defect layers on the tunneling mode has been studied for both TPC and conventional PC structure. The proposed model might be used as a tunable broadband omnidirectional reflector as well as tunable tunneling or transmission mode, which has potential applications in the field of photonics and optoelectronics.展开更多
基金supported by National Natural Science Foundation of China(No.11405271)
文摘A one dimensional model is developed for defective gap mode（DGM）with two types of boundary conditions：conducting mesh and conducting sleeve.For a periodically modulated system without defect,the normalized width of spectral gaps equals to the modulation factor,which is consistent with previous studies.For a periodic system with local defects introduced by the boundary conditions,it shows that the conducting-mesh-induced DGM is always well confined by spectral gaps while the conducting-sleeve-induced DGM is not.The defect location can be a useful tool to dynamically control the frequency and spatial periodicity of DGM inside spectral gaps.This controllability can be potentially applied to the interaction between gap eigenmodes and energetic particles in fusion plasmas,and optical microcavities and waveguides in photonic crystals.
基金Project supported by the National Natural Science Foundation of China (Grant Nos. 10674038 and 10604042)the National Basic Research Program of China (Grant No. 2006CB302901)
文摘This paper stuides numerically the model equation in a one dimensional defective photonic lattice by modifying the potential function to a periodic function. It is found that defect modes （DMs） can be regarded as Bloch modes which are excited from the extended photonie band-gap structure at Bloch wave-numbers with kx = 0. The DMs for both positive and negative defects are considered in this method.
基金partly supported by the National Key Basic Research Special Foundation of China (Grant Nos. 2010CB327605 and 2010CB328300)the National High-Technology Research and Development Program of China (Grant No. 2009AA01Z220)+3 种基金the Key Grant of the Chinese Ministry of Education (Grant No. 109015)the Discipline Co-construction Project of Beijing Municipal Commission of Education,China (Grant No. YB20081001301)the Open Fund of Key Laboratory of Information Photonics and Optical Communications (Beijing University of Posts and Telecommunications),Chinese Ministry of Educationthe Specialized Research Fund for the Doctoral Program of Beijing University of Posts and Telecommunications (Grant No. CX201023)
文摘With the full-vector plane-wave method （FVPWM） and the full-vector beam propagation method （FVBPM）, the dependences of the band-gap and mode characteristics on material index and cladding structure parameter in anti- resonance guiding photonic crystal fibres （ARGPCFs） are sufficiently analysed. An ARGPCF operating in the near- infrared wavelength is shown. The influences of the high index cylinders, glass interstitial apexes and silica structure on the characteristics of band-gaps and modes are deeply investigated. The equivalent planar waveguide theory is used for analysing such an ARGPCF filled by the isotropic materials, and the resonance and the anti-resonance characteristics r：~n h~ w~｜] r^r~dlrtpd
基金National Nature Science Foundation of China(No.50477024)
文摘The influence of an arc current on the discharge development and the arc modes of a single coil type axial magnetic field （AMF） electrode were investigated by a high-speed charge couple device （CCD） video camera in a long gap distance of 40 mm. The distribution of the axial magnetic field of the single coil type AMF electrode was computed. By computational results, the single coil type AMF electrode could generate higher axial magnetic flux density than the slot type AMF electrode. It was found that the single coil type AMF electrode could perform better than the slot type AMF electrode with the same designing parameters. And the development of the arc modes experienced diffuse mode, constricted but unstable mode, and constricted and stable mode with the amplitude of the arc current increasing. The correlation between the vacuum arc and the noise components of arc voltage was investigated too. The interruption capability could be known in a practical commercial vacuum interrupter by the test results in a demountable vacuum interrupter （DVC） with a electrode diameter of 50 mm and a gap distance of 40 mm.The test results could provide reference to design the high voltage vacuum interrupter adopting the single coil type AMF electrode.
基金Project supported by the National Key Basic Research Special Foundation (Grant No. 2010CB327605)National High-Technology Research and Development Program of China (Grant No. 2009AA01Z220)+2 种基金the Key Grant of the Chinese Ministry of Education (Grant No.109015)the Discipline Co-construction Project of Beijing Municipal Commission of Education (Grant No. YB20081001301)the Specialized Research Fund for the Doctoral Program of Beijing University of Posts and Telecommunications (Grant No. CX201023)
文摘This paper investigates the guided-mode characteristics of hollow-core photonic band-gap fibre （HC-PBGF） with interstitial holes fabricated by an improved twice stack-and-draw technique at visible wavelengths. Based on the simulation model with interstitial holes, the influence of glass interstitial apexes on photonic band-gaps is discussed. The existing forms of guided-mode in part band gaps are shown by using the full-vector plane-wave method. In the experiment, the observed transmission spectrum corresponds to the part band gaps obtained by simulation. The fundamental and second-order guided-modes with mixture of yellow and green light are observed through choosing appropriate fibre length and adjusting coupling device. The loss mechanism of guided-modes in HC-PBGF is also discussed.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61222110 and 60971073)
文摘A theoretical model is developed for calculating the eigenmodes of the multi-gap resonant cavity. The structure of concern is a kind of ladder-type circuit, offering the advantages of easy fabrication, high characteristic impedance （R/Q）, and thermal capacity in the millimeter wave to THz regime. The eigenfunction expansion method is used to establish the field expressions for the gaps and the coupling region. Then, the match conditions at the interface are employed, which leads to a group of complicate boundary equations in the form of an infinite series. To facilitate the mathematical treatments and perform a highly efficient calculation, these boundary equations are transformed into the algebraic forms through the matrix representations. Finally, the concise dispersion equation is obtained. The roots of the dispersion equation include both the axial modes in the gaps, which include the fundamental and the high-order modes, and the cavity modes in the coupling region. Extensive numerical results are presented and the behaviors of the multi-gap resonant cavity are examined.
基金supported by National Natural Science Foundation of China(No.50477024)
文摘The greenhouse effect of SFe is a great concern today. The development of high voltage vacuum circuit breakers becomes more important. The vacuum circuit breaker has minimum pollution to the environment. The vacuum interrupter is the key part of a vacuum circuit breaker. The interrupting characteristics in vacuum and arc-controlling techniue are the main problems to be solved for a longer gap distance in developing high voltage vacuum interrupters. To understand the vacuum arc characteristics and provide effective technique to control vacuum arc in a long gap distance, the arc mode transition of a cup-type axial magnetic field electrode is observed by a high-speed charge coupled device （CGD） video camera under different gap distances while the arc voltage and arc current are recorded. The controlling ability of the axial magnetic field on vacuum arc obviously decreases when the gap distance is longer than 40 ram. The noise components and mean value of the arc voltage significantly increase. The effective method for controlling the vacuum arc characteristics is provided by long gap distances based on the test results. The test results can be used as a reference to develop high voltage and large capacity vacuum interrupters.
文摘Optical features of a semiconductor–dielectric photonic crystal are studied theoretically. Alternating layers of micrometer sized SiO2/In Sb slabs are considered as building blocks of the proposed ideal crystal. By inserting additional layers and disrupting the regularity, two more defective crystals are also proposed. Photonic band structure of the ideal crystal and its dependence on the structural parameters are explored at the first step. Transmittance of the defective crystals and its changes with the thicknesses of the layers are studied. After extracting the optimum values for the thicknesses of the unit cells of the crystals, the optical response of the proposed structures at different temperatures and incident angles are investigated. Changes of the defect layers’ induced mode(s) are discussed by taking into consideration of the temperature dependence of the In Sb layer permittivity. The results clearly reflect the high potential of the proposed crystals to be used at high temperature terahertz technology as a promising alternative to their electronic counterparts.
文摘The mutual interaction of three different defects in photonic crystals is studied theoretically. A theoretical model based on the classical wave analogue of the tight-binding （TB） picture is applied to the structure. We obtain analytic expressions for the eigenfrequencies and eigenmodes, from which the transmissions at resonance are derived. Based on this, a new type of the photonic quantum-well structure is investigated and its possible application is discussed. The TB predictions are compared with the transfer matrix method simulation results.
基金supported by the National Natural Science Foundation of China (Grant Nos. 10975036 and 61071018)the Guangxi Natural Science Foundation,China (Grant No. 2010GXNSFB013049)
文摘This paper studies the dispersion characteristics of a modified photonic band-gap slow-wave structure with an open boundary by simulation and experiment. A mode launcher with a wheel radiator and a coupling probe is presented to excite a pure TM01-like mode. The cold test and simulation results show that the TM01-like mode is effectively excited and no parasitic modes appear. The dispersion characteristics obtained from the cold test are in good agreement with the calculated results.
文摘In this paper, the author proposed a methodology to reveal expected seismic activation places for coming years by a complex of forecasting parameters of a seismic mode. Areas in Uzbekistan where currently observed anomalies in various parameters of a seismic mode has been revealed. By number of displayed abnormal signs the areas has been ranked based on probability of occurrence of strong earthquakes there. It has prepared schemes of the synoptic forecast of expected seismic activation places in case of occurrence of strong earthquakes in the Central-Asian region.
文摘We show theoretically that range of reflection bands and defect modes inside the band gap can be tuned by using a one-dimensional tilted photonic crystal (TPC) structure. A TPC structure is similar to the conventional PC structure with the only difference that in this case alternate layers are inclined at certain angle in the direction of periodicity of the structure. In order to obtain the reflectance spectra of the proposed structure transfer matrix method (TMM) has been employed. From the analysis of the reflectance curve, it is found that 100% reflectance range can be varied and enhanced by using TPC structure for both (TE- and TM-) polarizations. The enhancement in reflection bands increases as the tilt angle increases for both the polarizations and hence the enlarged omni-reflectance bands are obtained. Further, we study the properties of the defect modes in TPC structure by introducing the tilted defect at the different tilt angle. The results show that defect modes (tunneling modes) can be tuned at different wavelengths by changing the tilt angle of the structure without changing other parameters. Finally, the effect of variation thickness of defect layers on the tunneling mode has been studied for both TPC and conventional PC structure. The proposed model might be used as a tunable broadband omnidirectional reflector as well as tunable tunneling or transmission mode, which has potential applications in the field of photonics and optoelectronics.
