We designed and investigated a passive synchronized mode-locked fiber laser.The device utilizes a dual-cavity structure driven by the nonlinear polarization rotation(NPR)mechanism.Stable mode-locking is attained by sy...We designed and investigated a passive synchronized mode-locked fiber laser.The device utilizes a dual-cavity structure driven by the nonlinear polarization rotation(NPR)mechanism.Stable mode-locking is attained by synergistically controlling gain,polarization state,and optical path length in two symmetric sub-cavities.Experiments proved that repetition rate of the sub-cavities can be adjusted via the time delay line(TDL)to achieve synchronized mode-locking.The system stably generates multi-wavelength pulses at a single repetition frequency,evidenced by multiple spectral peaks and equidistant pulse sequences.These findings facilitate the development of high-performance multi-wavelength ultrashort pulse sources,crucial for optical communications,spectral analysis,and remote sensing.展开更多
Quasi-two-dimensional(quasi-2d)perovskites are promising gain media for micro-nano lasers,yet their uncontrolled crystallization and abundant low-n phases often hinder optical gain and device performance.In this work,...Quasi-two-dimensional(quasi-2d)perovskites are promising gain media for micro-nano lasers,yet their uncontrolled crystallization and abundant low-n phases often hinder optical gain and device performance.In this work,we introduce ethyl acetate(EA)as a green antisolvent to fabricate high-quality quasi-2D PEA_(0.4)MAPbBr_(3)films.The EA-treated films exhibit superior morphology,enhanced crystallinity,and notably inhibited low n-phases.These improvements yield a prolonged photoluminescence lifetime of 26.3 ns and a substantially extended gain lifetime of 129 ps.Consequently,the optimized film exhibits a markedly reduced amplified spontaneous emission(ASE)threshold of 5.6μJ·cm^(-2)and a high net modal gain of 935 cm^(-1).Leveraging these enhanced gain properties,we successfully demonstrate a vertical-cavity surface-emitting laser(VCSEL)based on a dielectric Bragg reflector microcavity,which delivers single-mode lasing at 528.3 nm and a high quality factor of~5886.This work presents a green-solvent-engineering strategy for high-performance perovskite lasers,advancing their prospects for scalable photonic integration.展开更多
The precise excitation of molecular vibrational states is critical for ad-vancing chemical dynamics,preci-sion spectroscopy,and trace gas sensing.This objective,however,is often hindered by the weak oscilla-tor streng...The precise excitation of molecular vibrational states is critical for ad-vancing chemical dynamics,preci-sion spectroscopy,and trace gas sensing.This objective,however,is often hindered by the weak oscilla-tor strengths of ro-vibrational tran-sitions,which render conventional continuous-wave(cw)lasers ineffec-tive due to their limited power.This fundamental challenge is overcome by cavity-enhanced excitation(CEE),a technique that locks a cw laser to a high-finesse optical cavity.This configuration amplifies the intra-cavity light intensity by several orders of magnitude while preserving a narrow spectral linewidth.The resulting synergy enables highly efficient,state-selective population transfer and high-resolution spectroscopy previously considered impractical.This review elucidates the core technique of laser-cavity locking and highlights its applications,notably in the quantitative detection of trace isotopes and the investigation of highly excited vibrational states with kilo-hertz-level accuracy.展开更多
Materials exhibiting broadband nonlinear optical responses are critically important for ultrafast photonics applications,particularly as saturable absorbers(SAs)that facilitate broadband optical pulse generation.In th...Materials exhibiting broadband nonlinear optical responses are critically important for ultrafast photonics applications,particularly as saturable absorbers(SAs)that facilitate broadband optical pulse generation.In this study,tea polyphenolpolyvinyl alcohol(TP-PVA)composite films are synthesized via a polymer embedding method and employed as SAs to initiate ultrafast pulse operation in fiber lasers.The TP-PVA SA film exhibits excellent broadband saturable absorption performance at wavelengths of 1.0μm,1.5μm,and 2.0μm,with modulation depths of 54.21%,41.41%,and 51.16%,respectively.Stable passively mode-locked pulses with pulse widths of 588 fs,419 fs,and 743 fs are generated in Yb-,Er-,and Tm-doped fiber lasers,respectively.This work confirms the effective performance of TP-PVA as a broadband SA,and establishes a foundation for the integration of novel and sustainable materials within ultrafast photonic systems.The approach paves the way for developing compact broadband ultrafast laser systems operating in the near-infrared spectral region.展开更多
Broad area quantum cascade lasers(BA QCLs)have significant applications in many areas,but suffer from demanding pulse operating conditions and poor beam quality due to heat accumulation and generation of high order mo...Broad area quantum cascade lasers(BA QCLs)have significant applications in many areas,but suffer from demanding pulse operating conditions and poor beam quality due to heat accumulation and generation of high order modes.A structure of mini-array is adopted to improve the heat dissipation capacity and beam quality of BA QCLs.The active region is etched to form a multi-emitter and the channels are filled with In P:Fe,which acts as a lateral heat dissipation channel to improve the lateral heat dissipation efficiency.A device withλ~4.8μm,a peak output power of 122 W at 1.2%duty cycle with a pulse of 1.5μs is obtained in room temperature,with far-field single-lobed distribution.This result allows BA QCLs to obtain high peak power at wider pump pulse widths and higher duty cycle conditions,promotes the application of the mid-infrared laser operating in pulsed mode in th e field of standoff photoacoustic chemical detection,space optical communication,and so on.展开更多
Development of on-chip coherent light sources with desired single-mode operation and straightforward spectral tunability has attracted intense interest due to ever-increasing demand for photonic devices and optoelectr...Development of on-chip coherent light sources with desired single-mode operation and straightforward spectral tunability has attracted intense interest due to ever-increasing demand for photonic devices and optoelectronic integration,but still faces serious challenges.Herein,we propose a facile method to synthesize cesium lead halide(CsPbX3)microstructures with well-defined morphologies,sizes,and constituent element gradient.The scheme is conducted using a chemical vapor deposition(CVD),which is subsequently associated with annealing-assisted solid-solid anion exchange.For the plate-shaped structures,the controllability on the cross-sectional dimension enables to precisely modulate the lasing modes,thus achieving single-mode operation;while tuning the stoichiometric of the halogen anion components in the plate-shaped CsPbI_(x)Br_(3−x) alloy samples,the lasing wavelengths are straightforwardly varied to span the entire visible spectrum.By comparison,the experimental scheme on synthesizing alloyed CsPbI_(x)Br_(3−x) perovskites is conducted using an in-situ approach,thereby achieving precise modulation of bandgap-controlled microlasers by controlling the reaction time.Such laser properties like controllable microcavity modes and broad stoichiometry-dependent tunability of light-emitting/lasing colors,associated with the facile synthesizing method of monocrystalline CsPbI_(x)Br_(3−x) structures,make lead halide perovskites ideal materials for the development of wavelength-controlled microlasers toward practical photonic integration.展开更多
Objective The use of lasers has been an important part of urology in the treatment of stone and prostate disease.The thermal effects of lasers in lithotripsy have been a subject of debate over the years.The objective ...Objective The use of lasers has been an important part of urology in the treatment of stone and prostate disease.The thermal effects of lasers in lithotripsy have been a subject of debate over the years.The objective of this review was to assess the current state of knowledge available on the thermal effects of lasers in lithotripsy,as well as explore any new areas where studies are needed.Methods In August 2022,a keyword search on Google Scholar,PubMed,and Scopus for all papers containing the phrases“thermal effects”AND“laser”AND“lithotripsy”AND“urology”was done followed by citation jumping to other studies pertaining to the topic and 35 relevant papers were included in our study.The data from relevant papers were segregated into five groups according to the factor studied and type of study,and tables were created for a comparison of data.Results Temperature above the threshold of 43℃ was reached only when the power was>40 W and when there was adequate irrigation(at least 15–30 mL/min).Shorter lasing time divided by lithotripsy time or operator duty cycles less than 70%also resulted in a smaller temperature rise.Conclusion At least eight factors modify the thermal effects of lasers,and most importantly,the use of chilled irrigation at higher perfusion rates,lower power settings of<40 W,and with a shorter operator duty cycle will help to prevent thermal injuries from occurring.Stones impacted in the ureter or pelvi-ureteric junction further increase the probability of thermal injuries during laser firing.展开更多
As a representative transition metal dichalcogenides(TMD),NiTe_(2)has an ultra-fast optical response,high carrier mobility,and excellent environmental stability.It has a broad application prospect in the fields of ene...As a representative transition metal dichalcogenides(TMD),NiTe_(2)has an ultra-fast optical response,high carrier mobility,and excellent environmental stability.It has a broad application prospect in the fields of ener-gy,biomedicine,optoelectronic devices,and so on.At present,there have been scant reports on the application of NiTe_(2)in the field of ultrafast photonics.In this work,NiTe_(2)was synthesized by chemical vapor deposition(CVD)and integrated with a tapered optical fiber to achieve mode-locking in an erbium-doped fiber laser(EDFL)and a thu-lium-doped fiber laser(TDFL).The mode-locked EDFL exhibited a pulse width of 678 fs and an output power of 3.92 mW.The pulse width of mode-locked TDFL was estimated to have a pulse width of 694 fs with an output power of 21.64 mW.These results demonstrate that NiTe_(2)is an effective saturable absorber material with potential applica-tions in the field of ultrafast optics.展开更多
Introduction:Surgeons typically prefer 270μm and 272μm laser probes in retrograde intrarenal surgery(RIRS)due to the reduced deflection capacity of flexible ureterorenoscopes when using larger probe diameters.This s...Introduction:Surgeons typically prefer 270μm and 272μm laser probes in retrograde intrarenal surgery(RIRS)due to the reduced deflection capacity of flexible ureterorenoscopes when using larger probe diameters.This study aims to investigate the effects of 272 and 365μm holmium laser probes on operative time,clinical efficacy,and complication rates in RIRS.Materials and Methods:A total of 285 patients with proximal ureteral or kidney stones who met the inclusion criteria were enrolled in the study.Patients were divided into two groups based on laser probe thickness:272μm and 365μm.Stone-free rates,operative time,and complication rates were compared between the groups.Factors affecting stone-free rates were analyzed using multivariate logistic regression analysis.Results:Patient and stone characteristics were similar between the two groups.No significant differences were found in stone-free or complication rates.However,operative time was significantly shorter in the 365μm probe group.In univariate analysis,risk factors for postoperative residual stones included multi-calyceal stones,lower pole stones,high Hounsfield unit(HU)values on noncontrast computed tomography,and larger stone size.In multivariate analysis,independent prognostic factors for residual stones were identified as multi-calycal stones,lower pole stones,and high HU values.Conclusion:Compared to 272μm laser probes,operative time was shorter in surgeries performed with 365μm laser probes.The 365μm holmium laser can be effectively and safely used in the treatment of proximal ureteral and renal stones,demonstrating high clinical efficacy and safety.展开更多
Photonic crystal surface emitting lasers(PCSELs)utilize the Bragg diffraction of two-dimensional photonic crystals to achieve a single-mode output with a high power and a small divergence angle,and has recently attrac...Photonic crystal surface emitting lasers(PCSELs)utilize the Bragg diffraction of two-dimensional photonic crystals to achieve a single-mode output with a high power and a small divergence angle,and has recently attracted much attention^([1−3]).In 2023,Kyoto University reported GaAs-based 945 nm PCSELs with a continuous-wave(CW)single-mode output power of exceeding 50 W,and a narrow beam divergence angle of 0.05°,demonstrating a brightness of 1 GW·cm^(−2)·sr^(−1),which rivals those of the existing bulky lasers^([4]).展开更多
Perovskite materials have emerged as promising candidates for various optoelectronic applications owing to their remarkable optoelectronic properties and easy solution processing.Metal halide perovskites,as direct-ban...Perovskite materials have emerged as promising candidates for various optoelectronic applications owing to their remarkable optoelectronic properties and easy solution processing.Metal halide perovskites,as direct-bandgap semiconductors,show an excellent class of optical gain media,which makes them applicable to the development of low-threshold or even thresholdless lasers.This mini review explores recent advances in perovskite-based laser technology,which have led to chiral single-mode microlasers,low-threshold,external-cavity-free lasing devices at room temperature,and other innovative device architectures.Including self-assembled CsPbBr3 microwires that enable edge lasing.Realized continuous-wave(CW)pumped lasing by perovskite material pushes the research of electrically driven perovskite lasers.The capacity to regulate charge transport in halide perovskites further enhances their applicability in optoelectronic systems.The ongoing integration of perovskite materials with advanced photonic structures holds excellent potential for future innovations in laser technology and photovoltaics.We also highlight the transformative potential of perovskite materials in advancing the next generation of efficient and integrated optoelectronic devices.展开更多
Additive and solvent-free direct printing is critical for many applications,including smart electronics,solar cells,healthcare,and electrochemical energy storage.Although a few green techniques for direct patterning o...Additive and solvent-free direct printing is critical for many applications,including smart electronics,solar cells,healthcare,and electrochemical energy storage.Although a few green techniques for direct patterning of inorganic functional materials have been developed,they operate at small scale and require long processing times,restricting their effective translation from laboratory to market.Here we report a fast,liquid-free,cost-effective,and environmentally friendly aerosol-based printing method for fabricating linear or planar structures at microscale dimensions.In situ and on-demand generation of dry aerosol via pulsed laser ablation,coupled with real-time aerodynamical focusing using a co-flowing sheath gas,allows the deposition of a wide variety of materials on various substrates at room temperature and atmospheric pressure.Using silver as a test material,we systematically characterized the laser-generated aerosol deposits in terms of microstructural morphology,sintering activity,mass yield,density,and electrical performance,to show the relationship between process variability and underlying mechanisms.The capacity of high-throughput printing of silver deposits,with thickness up to 160μm,in a single pass was demonstrated.This rapid,efficient,and inkless printing process opens new and exciting opportunities for future applications that require easy-to-integrate components in printed electronic devices.展开更多
A RadioFrequency Quadrupole(RFQ)cooler-buncher system was developed and implemented in a collinear laser spectroscopy setup.This system converts a continuous ion beam into short bunches while enhancing the beam qualit...A RadioFrequency Quadrupole(RFQ)cooler-buncher system was developed and implemented in a collinear laser spectroscopy setup.This system converts a continuous ion beam into short bunches while enhancing the beam quality and reducing the energy spread.The functionality of the RFQ cooler buncher was verified through offline tests with stable rubidium and indium beams delivered from a surface ion source and a laser ablation ion source,respectively.Bunched ion beams with a full width at half maximum of approximately 2μs in the time-of-flight spectrum were successfully achieved with a transmission efficiency exceeding 60%.The implementation of the RFQ cooler-buncher system also significantly improved the overall transmission efficiency of the collinear laser spectroscopy setup.展开更多
Rotational dynamics simulations of neutral O_(2)molecules driven by linearly,elliptically and circularly polarized femtosecond pulsed lasers are carried out using a full quantum time-dependent wave packet evolution me...Rotational dynamics simulations of neutral O_(2)molecules driven by linearly,elliptically and circularly polarized femtosecond pulsed lasers are carried out using a full quantum time-dependent wave packet evolution method.Here,the direction of laser propagation is set along the z axis,and the polarization plane is restricted to the xy plane.The results indicate that the alignment of O_(2)molecules in the z direction is weakly affected by varying the ellipticity when the total laser intensity is held constant.For rotation within the xy plane,the linearly polarized laser significantly excites rotational motion,with the degree of excitation increasing as the ellipticity increases.In contrast,under the influence of a circularly polarized laser,the angular distribution of O_(2)molecules in the xy plane remains isotropic.Additionally,the effects of the initial rotational quantum number,the temperature of the O_(2)molecules and the nuclear spin on laser-induced alignment are discussed.展开更多
Perovskite semiconductors show great promise as gain media for all-solution-processed single-mode microlasers.However,despite the recent efforts to improve their lasing performance,achieving tunable single-mode microl...Perovskite semiconductors show great promise as gain media for all-solution-processed single-mode microlasers.However,despite the recent efforts to improve their lasing performance,achieving tunable single-mode microlasers remains challenging.In this work,we address this challenge by demonstrating a tunable vertical cavity surface emitting laser(VCSEL)employing a tunable gain medium of halide phase-change perovskites-specifically MAPbI_(3) perovskite,sandwiched between two highly reflective mirrors composed of bottom-distributed Bragg reflectors(DBRs).This VCSEL possesses single-mode lasing emission with a low threshold of 23.5μJ cm^(−2) under 160 K,attributed to strong optical confinement in the high-quality(Q)cavity.Upon the phase change of MAPbI_(3) perovskite,both its gain and dielectric constant changes dramatically,enabling a wide(Δλ>9 nm)and temperature-sensitive(0.30 nm K^(−1) rate)spectral tunability of lasing mode in the near-infrared(N-IR)region.The laser displays excellent stability,demonstrating an 80%lifetime of>2.4×107 pulses excitation.Our findings may provide a versatile platform for the next generation of tunable coherent light sources.展开更多
Cladding light strippers(CLSs)are essential components for high-power monolithic fiber laser systems.Because they allow for bending of the fiber,which leads to an excellent stripping efficiency of light with a low ray...Cladding light strippers(CLSs)are essential components for high-power monolithic fiber laser systems.Because they allow for bending of the fiber,which leads to an excellent stripping efficiency of light with a low ray angle,refractive index-based CLSs have an advantage over the commonly used alternative approaches.However,conventional high-index CLSs overheat at relatively low input power as the maximum temperature,located in a hot-spot,increases linearly with the input power.This applies particularly to CLSs in thulium-based fiber systems,where very low power can already lead to extreme heat generation due to the high cladding material absorption around 2μm.Here,we investigate materials with a highly negative thermooptical coefficient combined with a refractive index closely above glass to distribute the stripped power and heat uniformly along an increased fiber length.Analyzing multiple CLS geometries for fiber diameters of 125 and 400μm,we show record-high maximum input powers for single-material CLSs of 21.8 W for the signal(2039 nm)and 675 W for the pump wavelength(793 nm).Transmitting excess light instead of overheating,this wavelength-adaptable self-protecting CLS concept is fast to apply onsite in the lab and reaches stripping efficiencies of>40 dB in the bent version.展开更多
The authors report the development of aλ~4.1μm quantum cascade laser grown by metal-organic chemical vapor deposition using strain-balanced In Ga As/In Al As materials.A device with a 7.5 mm cavity length and 6.5μm...The authors report the development of aλ~4.1μm quantum cascade laser grown by metal-organic chemical vapor deposition using strain-balanced In Ga As/In Al As materials.A device with a 7.5 mm cavity length and 6.5μm ridge width,bonded to an aluminum nitride heatsink,achieves maximum output powers of 3.4 W at 288 K in pulsed mode and 1.6 W at288 K in continuous-wave(CW)operation,with corresponding maximum wall-plug efficiencies of 14.8%and 9.3%.A kink is observed in the power–current curve under CW operation,which is absent in pulsed operation.Near-field results show that in CW operation,the horizontal beam quality factor M2fluctuates with current,indicating mode instability and highorder lateral mode excitation,while in pulsed mode,the horizontal M2remains stable around 1.3 as the current increases from 1.4 A to 1.9 A.展开更多
Ultra-narrow bandwidth mode-locked lasers with tunable pulse duration can be versatile light sources for diverse applications.However,the spectral-temporal control of a narrow bandwidth mode-locked laser is challengin...Ultra-narrow bandwidth mode-locked lasers with tunable pulse duration can be versatile light sources for diverse applications.However,the spectral-temporal control of a narrow bandwidth mode-locked laser is challenging due to limited gain and nonlinearity,hindering practical applications of such lasers.We demonstrate a pulse duration widely tunable mode-locked ultra-narrow bandwidth laser using a composite filtering mechanism and a single-wall carbon nanotube.The laser pulse duration can be adjusted from 481 ps to 1.38 ns,which is the widest tuning range achieved in narrow-bandwidth passively mode-locked lasers.When the pulse duration is 1.38 ns,the corresponding spectral width reaches 4 pm(502 MHz).Numerical simulations support the experimental results and show that the evolution of long pulses in the laser cavity behaves similarly to a quasi-continuous wave with a low breathing ratio.We have not only designed a simple and flexible tunable scheme for the dilemma of spectral-temporal control in narrow-bandwidth mode-locked fiber lasers but also provided a unique and idealized light source for various applications that takes into account robust output.展开更多
The combustion behavior of Ti-Al-Mo-Zr-Sn-W alloy(TC25G)was studied in a high-temperature and high-speed air flow environment using the laser ignition method combined with ultra-high temperature infrared thermometer,s...The combustion behavior of Ti-Al-Mo-Zr-Sn-W alloy(TC25G)was studied in a high-temperature and high-speed air flow environment using the laser ignition method combined with ultra-high temperature infrared thermometer,scanning electron microscope,X-ray diffractometer,and transmission electron microscope.The burn-resistant performance of TC25G and TC11 alloys was compared.Meanwhile,the microstructural characteristics,crystal structure,and formation mechanism of the combustion products of TC25G alloy were analyzed in detail.The results show that the high-temperature and high-speed air flow promotes combustion within the air flow temperature range of 200–400℃and the air flow velocity range of 0–100 m/s.The combustion path advances along the direction of the air flow.The combustion of TC25G alloy mainly relies on the diffusion of the oxygen and the expansion of the combustion area caused by the movement of the melt.Based on the microstructure and composition of combustion product,it can be divided into the combustion zone,the melting zone,and the heat affected zone.During combustion,the formation of microstructures is closely correlated with the behavior of alloying elements and their selective combination with O.The major oxidation products of Ti are TiO and TiO_(2).The oxides formed by Mo and W hinder the movement of the melt during the combustion.Al and Zr tend to undergo internal oxidation.Al_(2)O_(3)precipitates on the surface of ZrO_(2),forming a protective oxide layer that inhibits the inward diffusion of O.Moreover,the element enrichment at the interface between the melting zone and the heat affected zone increases the melting point on the solid side,hindering the migration of the solid-liquid interface.展开更多
文摘We designed and investigated a passive synchronized mode-locked fiber laser.The device utilizes a dual-cavity structure driven by the nonlinear polarization rotation(NPR)mechanism.Stable mode-locking is attained by synergistically controlling gain,polarization state,and optical path length in two symmetric sub-cavities.Experiments proved that repetition rate of the sub-cavities can be adjusted via the time delay line(TDL)to achieve synchronized mode-locking.The system stably generates multi-wavelength pulses at a single repetition frequency,evidenced by multiple spectral peaks and equidistant pulse sequences.These findings facilitate the development of high-performance multi-wavelength ultrashort pulse sources,crucial for optical communications,spectral analysis,and remote sensing.
文摘Quasi-two-dimensional(quasi-2d)perovskites are promising gain media for micro-nano lasers,yet their uncontrolled crystallization and abundant low-n phases often hinder optical gain and device performance.In this work,we introduce ethyl acetate(EA)as a green antisolvent to fabricate high-quality quasi-2D PEA_(0.4)MAPbBr_(3)films.The EA-treated films exhibit superior morphology,enhanced crystallinity,and notably inhibited low n-phases.These improvements yield a prolonged photoluminescence lifetime of 26.3 ns and a substantially extended gain lifetime of 129 ps.Consequently,the optimized film exhibits a markedly reduced amplified spontaneous emission(ASE)threshold of 5.6μJ·cm^(-2)and a high net modal gain of 935 cm^(-1).Leveraging these enhanced gain properties,we successfully demonstrate a vertical-cavity surface-emitting laser(VCSEL)based on a dielectric Bragg reflector microcavity,which delivers single-mode lasing at 528.3 nm and a high quality factor of~5886.This work presents a green-solvent-engineering strategy for high-performance perovskite lasers,advancing their prospects for scalable photonic integration.
基金supported by the Chinese Acade-my of Sciences(Grant Nos.YSBR-055,XDB0970100)the National Natural Science Foundation of China(Nos.22241302,12393825).
文摘The precise excitation of molecular vibrational states is critical for ad-vancing chemical dynamics,preci-sion spectroscopy,and trace gas sensing.This objective,however,is often hindered by the weak oscilla-tor strengths of ro-vibrational tran-sitions,which render conventional continuous-wave(cw)lasers ineffec-tive due to their limited power.This fundamental challenge is overcome by cavity-enhanced excitation(CEE),a technique that locks a cw laser to a high-finesse optical cavity.This configuration amplifies the intra-cavity light intensity by several orders of magnitude while preserving a narrow spectral linewidth.The resulting synergy enables highly efficient,state-selective population transfer and high-resolution spectroscopy previously considered impractical.This review elucidates the core technique of laser-cavity locking and highlights its applications,notably in the quantitative detection of trace isotopes and the investigation of highly excited vibrational states with kilo-hertz-level accuracy.
基金supported by the Opening Foundation of Hubei Key Laboratory for New Textile Materials and Applications Research(Grant No.FZXCL202410)the Key Project of Science and Technology Research Program of Hubei Provincial Department of Education,China(Grant No.D20231704)+1 种基金Wuhan Textile University(Grant No.523058)the Foundation of Wuhan Textile University(Grant No.K24058)。
文摘Materials exhibiting broadband nonlinear optical responses are critically important for ultrafast photonics applications,particularly as saturable absorbers(SAs)that facilitate broadband optical pulse generation.In this study,tea polyphenolpolyvinyl alcohol(TP-PVA)composite films are synthesized via a polymer embedding method and employed as SAs to initiate ultrafast pulse operation in fiber lasers.The TP-PVA SA film exhibits excellent broadband saturable absorption performance at wavelengths of 1.0μm,1.5μm,and 2.0μm,with modulation depths of 54.21%,41.41%,and 51.16%,respectively.Stable passively mode-locked pulses with pulse widths of 588 fs,419 fs,and 743 fs are generated in Yb-,Er-,and Tm-doped fiber lasers,respectively.This work confirms the effective performance of TP-PVA as a broadband SA,and establishes a foundation for the integration of novel and sustainable materials within ultrafast photonic systems.The approach paves the way for developing compact broadband ultrafast laser systems operating in the near-infrared spectral region.
文摘Broad area quantum cascade lasers(BA QCLs)have significant applications in many areas,but suffer from demanding pulse operating conditions and poor beam quality due to heat accumulation and generation of high order modes.A structure of mini-array is adopted to improve the heat dissipation capacity and beam quality of BA QCLs.The active region is etched to form a multi-emitter and the channels are filled with In P:Fe,which acts as a lateral heat dissipation channel to improve the lateral heat dissipation efficiency.A device withλ~4.8μm,a peak output power of 122 W at 1.2%duty cycle with a pulse of 1.5μs is obtained in room temperature,with far-field single-lobed distribution.This result allows BA QCLs to obtain high peak power at wider pump pulse widths and higher duty cycle conditions,promotes the application of the mid-infrared laser operating in pulsed mode in th e field of standoff photoacoustic chemical detection,space optical communication,and so on.
基金supported by the National Natural Science Foundation of China(No.12374257)。
文摘Development of on-chip coherent light sources with desired single-mode operation and straightforward spectral tunability has attracted intense interest due to ever-increasing demand for photonic devices and optoelectronic integration,but still faces serious challenges.Herein,we propose a facile method to synthesize cesium lead halide(CsPbX3)microstructures with well-defined morphologies,sizes,and constituent element gradient.The scheme is conducted using a chemical vapor deposition(CVD),which is subsequently associated with annealing-assisted solid-solid anion exchange.For the plate-shaped structures,the controllability on the cross-sectional dimension enables to precisely modulate the lasing modes,thus achieving single-mode operation;while tuning the stoichiometric of the halogen anion components in the plate-shaped CsPbI_(x)Br_(3−x) alloy samples,the lasing wavelengths are straightforwardly varied to span the entire visible spectrum.By comparison,the experimental scheme on synthesizing alloyed CsPbI_(x)Br_(3−x) perovskites is conducted using an in-situ approach,thereby achieving precise modulation of bandgap-controlled microlasers by controlling the reaction time.Such laser properties like controllable microcavity modes and broad stoichiometry-dependent tunability of light-emitting/lasing colors,associated with the facile synthesizing method of monocrystalline CsPbI_(x)Br_(3−x) structures,make lead halide perovskites ideal materials for the development of wavelength-controlled microlasers toward practical photonic integration.
文摘Objective The use of lasers has been an important part of urology in the treatment of stone and prostate disease.The thermal effects of lasers in lithotripsy have been a subject of debate over the years.The objective of this review was to assess the current state of knowledge available on the thermal effects of lasers in lithotripsy,as well as explore any new areas where studies are needed.Methods In August 2022,a keyword search on Google Scholar,PubMed,and Scopus for all papers containing the phrases“thermal effects”AND“laser”AND“lithotripsy”AND“urology”was done followed by citation jumping to other studies pertaining to the topic and 35 relevant papers were included in our study.The data from relevant papers were segregated into five groups according to the factor studied and type of study,and tables were created for a comparison of data.Results Temperature above the threshold of 43℃ was reached only when the power was>40 W and when there was adequate irrigation(at least 15–30 mL/min).Shorter lasing time divided by lithotripsy time or operator duty cycles less than 70%also resulted in a smaller temperature rise.Conclusion At least eight factors modify the thermal effects of lasers,and most importantly,the use of chilled irrigation at higher perfusion rates,lower power settings of<40 W,and with a shorter operator duty cycle will help to prevent thermal injuries from occurring.Stones impacted in the ureter or pelvi-ureteric junction further increase the probability of thermal injuries during laser firing.
基金Supported by Guangdong Basic and Applied Basic Research Fund,China(2024A1515012429)。
文摘As a representative transition metal dichalcogenides(TMD),NiTe_(2)has an ultra-fast optical response,high carrier mobility,and excellent environmental stability.It has a broad application prospect in the fields of ener-gy,biomedicine,optoelectronic devices,and so on.At present,there have been scant reports on the application of NiTe_(2)in the field of ultrafast photonics.In this work,NiTe_(2)was synthesized by chemical vapor deposition(CVD)and integrated with a tapered optical fiber to achieve mode-locking in an erbium-doped fiber laser(EDFL)and a thu-lium-doped fiber laser(TDFL).The mode-locked EDFL exhibited a pulse width of 678 fs and an output power of 3.92 mW.The pulse width of mode-locked TDFL was estimated to have a pulse width of 694 fs with an output power of 21.64 mW.These results demonstrate that NiTe_(2)is an effective saturable absorber material with potential applica-tions in the field of ultrafast optics.
文摘Introduction:Surgeons typically prefer 270μm and 272μm laser probes in retrograde intrarenal surgery(RIRS)due to the reduced deflection capacity of flexible ureterorenoscopes when using larger probe diameters.This study aims to investigate the effects of 272 and 365μm holmium laser probes on operative time,clinical efficacy,and complication rates in RIRS.Materials and Methods:A total of 285 patients with proximal ureteral or kidney stones who met the inclusion criteria were enrolled in the study.Patients were divided into two groups based on laser probe thickness:272μm and 365μm.Stone-free rates,operative time,and complication rates were compared between the groups.Factors affecting stone-free rates were analyzed using multivariate logistic regression analysis.Results:Patient and stone characteristics were similar between the two groups.No significant differences were found in stone-free or complication rates.However,operative time was significantly shorter in the 365μm probe group.In univariate analysis,risk factors for postoperative residual stones included multi-calyceal stones,lower pole stones,high Hounsfield unit(HU)values on noncontrast computed tomography,and larger stone size.In multivariate analysis,independent prognostic factors for residual stones were identified as multi-calycal stones,lower pole stones,and high HU values.Conclusion:Compared to 272μm laser probes,operative time was shorter in surgeries performed with 365μm laser probes.The 365μm holmium laser can be effectively and safely used in the treatment of proximal ureteral and renal stones,demonstrating high clinical efficacy and safety.
基金funded by National Key R&D Program of China(Grant Nos.2024YFB3612200,2023YFB3609601,2022YFB3604300,2022YFB2802801,2022YFB3604802)Natural Science Foundation of China(Grant Nos.U24A20300,62174174,62274177,62275263,62325406,62374172,62304242,62304240,62404241)+4 种基金Youth Innovation Promotion Association of CAS(Grant Nos.2022323 and 2022324)Key R&D Program of Jiangsu Province(Grant No.BE2023018-2)Basic Research Program of Jiangsu(Grant No.BK20240126)Suzhou Science and Technology Program(Grant Nos.SYC2022089,ZXL2024379,and ZXL2024376)Guangdong Basic and Applied Basic Research Foundation(Grant Nos.2022A1515110482 and 2022A1515110004).
文摘Photonic crystal surface emitting lasers(PCSELs)utilize the Bragg diffraction of two-dimensional photonic crystals to achieve a single-mode output with a high power and a small divergence angle,and has recently attracted much attention^([1−3]).In 2023,Kyoto University reported GaAs-based 945 nm PCSELs with a continuous-wave(CW)single-mode output power of exceeding 50 W,and a narrow beam divergence angle of 0.05°,demonstrating a brightness of 1 GW·cm^(−2)·sr^(−1),which rivals those of the existing bulky lasers^([4]).
文摘Perovskite materials have emerged as promising candidates for various optoelectronic applications owing to their remarkable optoelectronic properties and easy solution processing.Metal halide perovskites,as direct-bandgap semiconductors,show an excellent class of optical gain media,which makes them applicable to the development of low-threshold or even thresholdless lasers.This mini review explores recent advances in perovskite-based laser technology,which have led to chiral single-mode microlasers,low-threshold,external-cavity-free lasing devices at room temperature,and other innovative device architectures.Including self-assembled CsPbBr3 microwires that enable edge lasing.Realized continuous-wave(CW)pumped lasing by perovskite material pushes the research of electrically driven perovskite lasers.The capacity to regulate charge transport in halide perovskites further enhances their applicability in optoelectronic systems.The ongoing integration of perovskite materials with advanced photonic structures holds excellent potential for future innovations in laser technology and photovoltaics.We also highlight the transformative potential of perovskite materials in advancing the next generation of efficient and integrated optoelectronic devices.
基金financial support from the China Scholarship Council(No.202108220036)Advanced Microscopy Laboratory in Trinity College Dublin。
文摘Additive and solvent-free direct printing is critical for many applications,including smart electronics,solar cells,healthcare,and electrochemical energy storage.Although a few green techniques for direct patterning of inorganic functional materials have been developed,they operate at small scale and require long processing times,restricting their effective translation from laboratory to market.Here we report a fast,liquid-free,cost-effective,and environmentally friendly aerosol-based printing method for fabricating linear or planar structures at microscale dimensions.In situ and on-demand generation of dry aerosol via pulsed laser ablation,coupled with real-time aerodynamical focusing using a co-flowing sheath gas,allows the deposition of a wide variety of materials on various substrates at room temperature and atmospheric pressure.Using silver as a test material,we systematically characterized the laser-generated aerosol deposits in terms of microstructural morphology,sintering activity,mass yield,density,and electrical performance,to show the relationship between process variability and underlying mechanisms.The capacity of high-throughput printing of silver deposits,with thickness up to 160μm,in a single pass was demonstrated.This rapid,efficient,and inkless printing process opens new and exciting opportunities for future applications that require easy-to-integrate components in printed electronic devices.
基金supported by the National Natural Science Foundation of China(Nos.12027809,12350007)National Key R&D Program of China(Nos.2022YFA1605100,2023YFA1606403,and 2023YFE0101600)+1 种基金New Cornerstone Science Foundation through the XPLORER PRIZEfunding from the European Research Council(ERC)under the European Union’s Horizon 2020 research and innovation program under grant agreement No.679038.
文摘A RadioFrequency Quadrupole(RFQ)cooler-buncher system was developed and implemented in a collinear laser spectroscopy setup.This system converts a continuous ion beam into short bunches while enhancing the beam quality and reducing the energy spread.The functionality of the RFQ cooler buncher was verified through offline tests with stable rubidium and indium beams delivered from a surface ion source and a laser ablation ion source,respectively.Bunched ion beams with a full width at half maximum of approximately 2μs in the time-of-flight spectrum were successfully achieved with a transmission efficiency exceeding 60%.The implementation of the RFQ cooler-buncher system also significantly improved the overall transmission efficiency of the collinear laser spectroscopy setup.
基金supported by the National Key Research and Development Program of China(Grant No.2022YFA1602502)the National Natural Science Foundation of China(Grant No.12450404).
文摘Rotational dynamics simulations of neutral O_(2)molecules driven by linearly,elliptically and circularly polarized femtosecond pulsed lasers are carried out using a full quantum time-dependent wave packet evolution method.Here,the direction of laser propagation is set along the z axis,and the polarization plane is restricted to the xy plane.The results indicate that the alignment of O_(2)molecules in the z direction is weakly affected by varying the ellipticity when the total laser intensity is held constant.For rotation within the xy plane,the linearly polarized laser significantly excites rotational motion,with the degree of excitation increasing as the ellipticity increases.In contrast,under the influence of a circularly polarized laser,the angular distribution of O_(2)molecules in the xy plane remains isotropic.Additionally,the effects of the initial rotational quantum number,the temperature of the O_(2)molecules and the nuclear spin on laser-induced alignment are discussed.
基金supported by the National Key Research and Development Program of China(2020YFA0714504,2019YFA0709100 to T.C.)the program of the National Natural Science Foundation of China(No.62105054 to T.C.)+1 种基金the New Cornerstone Science Foundation(AoE/P502/20 to S.Z.)the Research Grants Council of Hong Kong(17315522 to S.Z.).
文摘Perovskite semiconductors show great promise as gain media for all-solution-processed single-mode microlasers.However,despite the recent efforts to improve their lasing performance,achieving tunable single-mode microlasers remains challenging.In this work,we address this challenge by demonstrating a tunable vertical cavity surface emitting laser(VCSEL)employing a tunable gain medium of halide phase-change perovskites-specifically MAPbI_(3) perovskite,sandwiched between two highly reflective mirrors composed of bottom-distributed Bragg reflectors(DBRs).This VCSEL possesses single-mode lasing emission with a low threshold of 23.5μJ cm^(−2) under 160 K,attributed to strong optical confinement in the high-quality(Q)cavity.Upon the phase change of MAPbI_(3) perovskite,both its gain and dielectric constant changes dramatically,enabling a wide(Δλ>9 nm)and temperature-sensitive(0.30 nm K^(−1) rate)spectral tunability of lasing mode in the near-infrared(N-IR)region.The laser displays excellent stability,demonstrating an 80%lifetime of>2.4×107 pulses excitation.Our findings may provide a versatile platform for the next generation of tunable coherent light sources.
文摘Cladding light strippers(CLSs)are essential components for high-power monolithic fiber laser systems.Because they allow for bending of the fiber,which leads to an excellent stripping efficiency of light with a low ray angle,refractive index-based CLSs have an advantage over the commonly used alternative approaches.However,conventional high-index CLSs overheat at relatively low input power as the maximum temperature,located in a hot-spot,increases linearly with the input power.This applies particularly to CLSs in thulium-based fiber systems,where very low power can already lead to extreme heat generation due to the high cladding material absorption around 2μm.Here,we investigate materials with a highly negative thermooptical coefficient combined with a refractive index closely above glass to distribute the stripped power and heat uniformly along an increased fiber length.Analyzing multiple CLS geometries for fiber diameters of 125 and 400μm,we show record-high maximum input powers for single-material CLSs of 21.8 W for the signal(2039 nm)and 675 W for the pump wavelength(793 nm).Transmitting excess light instead of overheating,this wavelength-adaptable self-protecting CLS concept is fast to apply onsite in the lab and reaches stripping efficiencies of>40 dB in the bent version.
文摘The authors report the development of aλ~4.1μm quantum cascade laser grown by metal-organic chemical vapor deposition using strain-balanced In Ga As/In Al As materials.A device with a 7.5 mm cavity length and 6.5μm ridge width,bonded to an aluminum nitride heatsink,achieves maximum output powers of 3.4 W at 288 K in pulsed mode and 1.6 W at288 K in continuous-wave(CW)operation,with corresponding maximum wall-plug efficiencies of 14.8%and 9.3%.A kink is observed in the power–current curve under CW operation,which is absent in pulsed operation.Near-field results show that in CW operation,the horizontal beam quality factor M2fluctuates with current,indicating mode instability and highorder lateral mode excitation,while in pulsed mode,the horizontal M2remains stable around 1.3 as the current increases from 1.4 A to 1.9 A.
基金supported by the National Natural Science Foundation of China(Grant No.61975107)the Natural Science Foundation of Shanghai(Grant Nos.24ZR1422000 and 20ZR1471500),and the“111”Project(Grant No.D20031).
文摘Ultra-narrow bandwidth mode-locked lasers with tunable pulse duration can be versatile light sources for diverse applications.However,the spectral-temporal control of a narrow bandwidth mode-locked laser is challenging due to limited gain and nonlinearity,hindering practical applications of such lasers.We demonstrate a pulse duration widely tunable mode-locked ultra-narrow bandwidth laser using a composite filtering mechanism and a single-wall carbon nanotube.The laser pulse duration can be adjusted from 481 ps to 1.38 ns,which is the widest tuning range achieved in narrow-bandwidth passively mode-locked lasers.When the pulse duration is 1.38 ns,the corresponding spectral width reaches 4 pm(502 MHz).Numerical simulations support the experimental results and show that the evolution of long pulses in the laser cavity behaves similarly to a quasi-continuous wave with a low breathing ratio.We have not only designed a simple and flexible tunable scheme for the dilemma of spectral-temporal control in narrow-bandwidth mode-locked fiber lasers but also provided a unique and idealized light source for various applications that takes into account robust output.
基金China“Ye Qisun”Science Foundation Project of National Natural Science Foundation(U2141222)Innovation Fund(8F231527Z)。
文摘The combustion behavior of Ti-Al-Mo-Zr-Sn-W alloy(TC25G)was studied in a high-temperature and high-speed air flow environment using the laser ignition method combined with ultra-high temperature infrared thermometer,scanning electron microscope,X-ray diffractometer,and transmission electron microscope.The burn-resistant performance of TC25G and TC11 alloys was compared.Meanwhile,the microstructural characteristics,crystal structure,and formation mechanism of the combustion products of TC25G alloy were analyzed in detail.The results show that the high-temperature and high-speed air flow promotes combustion within the air flow temperature range of 200–400℃and the air flow velocity range of 0–100 m/s.The combustion path advances along the direction of the air flow.The combustion of TC25G alloy mainly relies on the diffusion of the oxygen and the expansion of the combustion area caused by the movement of the melt.Based on the microstructure and composition of combustion product,it can be divided into the combustion zone,the melting zone,and the heat affected zone.During combustion,the formation of microstructures is closely correlated with the behavior of alloying elements and their selective combination with O.The major oxidation products of Ti are TiO and TiO_(2).The oxides formed by Mo and W hinder the movement of the melt during the combustion.Al and Zr tend to undergo internal oxidation.Al_(2)O_(3)precipitates on the surface of ZrO_(2),forming a protective oxide layer that inhibits the inward diffusion of O.Moreover,the element enrichment at the interface between the melting zone and the heat affected zone increases the melting point on the solid side,hindering the migration of the solid-liquid interface.
