To investigate the influence of the shear lag effect on the bending shear stress of single-box multicell box gird-ers(MCBG),the shear lag warping additional deflection is selected as the generalized displacement.The g...To investigate the influence of the shear lag effect on the bending shear stress of single-box multicell box gird-ers(MCBG),the shear lag warping additional deflection is selected as the generalized displacement.The governing dif-ferential equations and boundary conditions for the shear lag of the MCBG are derived using the energy variational method.Based on the shear lag warping deformation state of the MCBG and by employing the microelement equilib-rium differential equation and the coordination conditions for shear lag warping deformation,the calculation method for the bending-warping shear stress of the MCBG is de-rived,and the influence of the width-to-span and height-to span ratios on bending-warping shear stress is analyzed.Ex-ample analysis shows that the bending-warping shear stress of the MCBG calculated by the proposed calculation method coincides with the finite element solution,and the warping shear stress satisfies the self-balancing condition of shear warping,thus verifying the accuracy of the proposed method.The warping shear stress exhibits an antisymmetric distribution about the vertical axis of symmetry and has a weakening effect on the shear stress of the elementary beam(EB).The larger the width-to-span ratio is,the larger the proportion of the warping shear stress of the EB.The larger the height-to-span ratio is,the smaller the proportion of the warping shear stress and the more significant the influence of the width-to-span ratio.The more the number of cells is,the smaller the influence of the warping shear stress on the total bending shear stress.The influence of the shear lag ef-fect can be ignored in the calculation of the bending shear stress of three or more cells in the MCBG.展开更多
This study examines the temperature field distribution characteristics and temperature effects during the prefabrication of composite box girders with corrugated steel webs(CBGCSWs),aiming to provide practical recomme...This study examines the temperature field distribution characteristics and temperature effects during the prefabrication of composite box girders with corrugated steel webs(CBGCSWs),aiming to provide practical recommendations for controlling temperature-induced cracking and technical guidance for concrete mix proportions and placement processes.Based on field measurement data,a three-dimensional finite element model was developed to simulate the temperature effects at critical locations during the prefabrication phase.By varying the concrete mix proportions,initial casting temperature,and ambient temperature,the study elucidates the variation patterns of the temperature field during precast placement.The results show that the temperature rise caused by hydration heat increases with higher cement and fly ash content,whereas reducing cement and using minimal fly ash effectively lower the hydration temperature.However,the influence of fly ash on prestress losses should be carefully evaluated during the design phase.Higher initial casting temperatures accelerate hydration rates,leading to a rapid temperature rise.Significant differences between the initial casting and ambient temperatures result in larger residual temperature stresses.Based on concrete mix proportions,curing conditions,and ambient temperatures,three recommended casting temperature ranges were identified:5℃–10℃,10℃–25℃,and 25℃–30℃.Variations in the average ambient temperature affect the peak temperature of the hydration reaction and indirectly influence the final temperature distribution of the concrete structure.Optimizing the demolding time and applying geotextiles and water curing effectively reduces the peak temperature,maximum internal-to-surface temperature gradients,and surface tensile stresses,thereby mitigating the risk of temperature-induced cracking.展开更多
Streamlined box girders serve as a prevalent choice for the primary structural elements in large-span suspension bridge designs.With the increase in traffic demands,the design of such girders is evolving towards wider...Streamlined box girders serve as a prevalent choice for the primary structural elements in large-span suspension bridge designs.With the increase in traffic demands,the design of such girders is evolving towards wider bridge decks and larger aspect ratios(B/D).To obtain more effective and aerodynamic design shapes for streamlined box girders,it is essential to investigate the impact of B/D on their aerodynamic performance.Accordingly,in this study we investigate the buffeting responses of large-span suspension bridges using girders of varying aspect ratios(B/D of 7.5,9.3,and 12.7).First,the aerodynamic coefficients of these girders are estimated using computational fluid dynamics(CFD)simulations.Subsequently,spatial finite element(FE)models of three long-span suspension bridges with different girders(B/D of 7.5,9.3,and 12.7)are established in Ansys software,and the dynamic characteristics of these bridges are obtained.Then,the time-domain buffeting analysis is performed by simulating the fluctuating wind fields acting on the bridge through the spectral representation method.Ultimately,the buffeting responses are computed using Ansys software,and the impact of B/D on these responses is assessed.The results reveal that the root mean square(RMS)values of the main girder’s buffeting displacement are highest at the midspan position and are lowest at the ends of the bridge.A decrease in B/D of the main girder leads to a more severe buffeting response because both the range and the effective value of the displacement increase with the decreasing B/D.Comparing the buffeting displacements in three directions,B/D plays a significant role in the vertical buffeting displacement,moderately impacts the torsional displacement,and has the least effect on the lateral displacement.The findings of this study may help wind resistance analysis and design optimization for bridges.展开更多
The post buckling strength of web plate of I section plate girders is considered to resist the shear force in many other countries code for design of steel structures,while it has not been considered in the Chinese ...The post buckling strength of web plate of I section plate girders is considered to resist the shear force in many other countries code for design of steel structures,while it has not been considered in the Chinese code GB J17-88.For the code revising,some important conclusions have been drawn through the theoretical analysis and experimental research of the post buckling strength of web plate of I section plate girders.展开更多
A comparative study of two pre-stressed girder bridges, one with AASHTO （American Association of State Highway and Transportation Officials） Type III girders and the other with new FIB （Florida l-beam） girders, is...A comparative study of two pre-stressed girder bridges, one with AASHTO （American Association of State Highway and Transportation Officials） Type III girders and the other with new FIB （Florida l-beam） girders, is presented. FIB girders are expected to provide increased lateral stiffness, higher load carrying capacity, cost-efficiency and better reliability. In this paper, the first bridge that is analyzed is a 3-span bridge designed with six AASHTO Type III girders, and the second bridge has four FIB girders with the same span length, width and girder depth. The bridges are analyzed for Florida state legal loads SU4 and C5. Both bridges are analyzed using a sophisticated finite element method. The deflections, moment envelopes, section capacity and live load rating of the two bridges are obtained and compared. FIB girders have higher vertical stiffness, higher section capacity providing higher load rating than the AASHTO girders.展开更多
The prosperous post buckling load capacity of web plates of box girders can be used.In this article,the post buckling behaviour of web plates of box girders under different loading conditions is theoretically analyz...The prosperous post buckling load capacity of web plates of box girders can be used.In this article,the post buckling behaviour of web plates of box girders under different loading conditions is theoretically analyzed and on the basis of domestic and overseas design codes of steel structures,the corresponding simplified analysis methods are put forward for the engineering design or code revision.It is proved that the simplified methods are safe,efficient and practicable through the comparison between several results.展开更多
In order to analyze the load carrying capacity of prestressed concrete box girders, failure behaviors of in-situ deteriorated continuous prestressed concrete box girders under loading are experimentally observed and a...In order to analyze the load carrying capacity of prestressed concrete box girders, failure behaviors of in-situ deteriorated continuous prestressed concrete box girders under loading are experimentally observed and a finite failure analysis method for predicting behaviors of box girders is developed. A degenerated solid shell element is used to simulate box girders and material nonlinearity is considered. Since pre-stressed concrete box girders usually have a large number of curve prestressed tendons, a type of combined element is presented to simulate the prestressed tendons of box girders, and then the number of elements can be significantly reduced. The analytical results are compared with full-scale failure test results. The comparison shows that the presented method can be effectively applied to the failure analysis of in-situ continuous prestressed concrete box girders, and it also shows that the studied old bridge still has enough load carrying capacity.展开更多
Long-term load and flexural failure experiments are carried out on two prestressed concrete(PC) simply supported box girders. In the long-term load experiment, girder-1(G1) is in an elastic state, while girder-2(G2) i...Long-term load and flexural failure experiments are carried out on two prestressed concrete(PC) simply supported box girders. In the long-term load experiment, girder-1(G1) is in an elastic state, while girder-2(G2) is in a cracking state. To investigate the influence of cracking on the flexural behaviors of PC simply supported box beams, the experiment results are analyzed from many aspects, such as load–deflection, load–strain, and failure mode. Experiment results show the following: 1) the shrinkage and creep of concrete have considerable influences on the long-term deflection and strain of the two girders; 2) in the flexural failure experiment, the cracks and ultimate loads of the two girders are close. The rigidity degeneration of G2 is significantly faster than that of G1, and thus G2 shows nonlinear characteristics earlier; 3) to prove the validity and rationality of the current code, the cracking load and ultimate load of the two girders are calculated according to the current code.展开更多
Considering three longitudinal displacement functions and uniform axial displacement functions for shear lag effect and uniform axial deformation of thin-walled box girder with varying depths,a simple and efficient me...Considering three longitudinal displacement functions and uniform axial displacement functions for shear lag effect and uniform axial deformation of thin-walled box girder with varying depths,a simple and efficient method with high precision to analyze the shear lag effect of thin-walled box girders was proposed.The governing differential equations and boundary conditions of the box girder under lateral loading were derived based on the energy-variational method,and closed-form solutions to stress and deflection corresponding to lateral loading were obtained.Analysis and calculations were carried out with respect to a trapezoidal box girder under concentrated loading or uniform loading and a rectangular box girder under concentrated loading.The analytical results were compared with numerical solutions derived according to the high order finite strip element method and the experimental results.The investigation shows that the closed-form solution is in good agreement with the numerical solutions derived according to the high order finite strip method and the experimental results,and has good stability.Because of the shear lag effect,the stress in cross-section centroid is no longer zero,thus it is not reasonable enough to assume that the strain in cross-section centroid is zero without considering uniform axial deformation.展开更多
Owning to good mechanical properties,steel–concrete composite(SCC)and prestressed concrete(PC)box girders are the types of elevated structures used most in urban rail transit.However,their vibro-acoustic differences ...Owning to good mechanical properties,steel–concrete composite(SCC)and prestressed concrete(PC)box girders are the types of elevated structures used most in urban rail transit.However,their vibro-acoustic differences are yet to be explored in depth,while structure-radiated noise is becoming a main concern in noise-sensitive environments.In this work,numerical simulation is used to investigate the vibration and noise characteristics of both types of box girders induced by running trains,and the numerical procedure is verified with data measured from a PC box girder.The mechanism of vibration transmission and vibro-acoustic comparisons between SCC and PC box girders are investigated in detail,revealing that more vibration and noise arise from SCC box girders.The vibration differences between them are around 7.7 dB(A)at the bottom plate,19.3 dB(A)at the web,and 6.7 dB(A)at the flange,while for structure-radiated noise,the difference is around 5.9 dB(A).Then,potential vibroacoustic control strategies for SCC box girders are discussed.As the vibro-acoustic responses of two types of girders are dominated by the force transmitted to the bridge deck,track isolation is better than structural enhancement.It is shown that using a floating track slab can make the vibration and noise of an SCC box girder lower than those of a PC box girder.However,structural enhancement for the SCC box girder is extremely limited in effects.The six proposed structural enhancement measures reduce vibration by only 1.1–3.6 dB(A) and noise by up to1.5 dB(A).展开更多
Based on heat transfer theory,a two-dimensional complex exponential function was used to compute heat of concrete hydration.A concrete box girder consisting of a single box with two cells used on Harbin Songpu Bridge ...Based on heat transfer theory,a two-dimensional complex exponential function was used to compute heat of concrete hydration.A concrete box girder consisting of a single box with two cells used on Harbin Songpu Bridge was measured on site.The two coefficients in the complex exponential function were determined to best fit the field measured data.ABAQUS program was used to simulate the heat transfer and determine the temperature distribution in the concrete box girders during concrete setting.The calculated temperature distribution in the box girders were compared with the field measured data and good agreement was observed.The temperature distribution and gradient in the entire box section,webs and bottom slab were analyzed using the measured and calculated results during the course of concrete hydration.展开更多
The purpose of the present study is to investigate the influence of different types of shear connectors on mechanical behavior of composite steel and concrete girders under negative bending moment. Two overturned simp...The purpose of the present study is to investigate the influence of different types of shear connectors on mechanical behavior of composite steel and concrete girders under negative bending moment. Two overturned simply supported steel-concrete composite girders with different shear connectors including studs and PBLs （perfo-bond strips） were tested under point load in the mid-span. Based on the experimental observations, a three-dimensional FE （finite element） model capable of analyzing the composite girders subjected to negative bending moment was built. Load and deformation response, concrete initial cracking and composite girder ultimate load bearing capacity, strain development process of reinforcing bars before and after concrete cracking were observed in the test and compared with the numerical values. Results predicted by this modeling method are in good agreement with those obtained from the tests. Furthermore, the %rack closure＂ or ＂through crack＂ load were recorded by π-ganges in the tests and compared with the code-specified ultimate load.展开更多
Based on the Finite Element Analysis and Thin Walled-Box girder Mechanics, two design concepts of adding box girders under main deck in order to increase the hull strength of ship are presented. By comparison and anal...Based on the Finite Element Analysis and Thin Walled-Box girder Mechanics, two design concepts of adding box girders under main deck in order to increase the hull strength of ship are presented. By comparison and analysis on the longitudinal strength, torsion strength and deck buckling between designed concepts and the original concept, it is found that by adding box girders under the main deck, the weight of hull structure is increased by lower than 10%, but the stress on the plate of the main deck is reduced by about 10%, the stress on the plating of the second deck is reduced about 20%. The shear stress on the plating of both of the main deck and second deck is reduced, but the shear stresses in several nodes are increased. Also the capability of resisting damage to ship is obviously increased by adding box girders under the main deck. The deck buckling is also increased by more than 90%. Consequently, the box girders added under the main deck are useful and effective to increase the strength of hull and ship survivability.展开更多
In order to investigate the fatigue performance of orthotropic anisotropic steel bridge decks,this study realizes the simulation of the welding process through elastic-plastic finite element theory,thermal-structural ...In order to investigate the fatigue performance of orthotropic anisotropic steel bridge decks,this study realizes the simulation of the welding process through elastic-plastic finite element theory,thermal-structural sequential coupling,and the birth-death element method.The simulated welding residual stresses are introduced into the multiscale finite element model of the bridge as the initial stress.Furthermore,the study explores the impact of residual stress on crack propagation in the fatigue-vulnerable components of the corroded steel box girder.The results indicate that fatigue cracks at the weld toe of the top deck,the weld root of the top deck,and the opening of the transverse diaphragm will not propagate under the action of a standard vehicle load.However,the inclusion of residual stress leads to the propagation of these cracks.When considering residual stress,the fatigue crack propagation paths at the weld toe of the transverse diaphragm and the U-rib weld toe align with those observed in actual bridges.In the absence of residual stress,the cracks at the toe of the transverse diaphragm with a 15%mass loss rate are categorized as type I cracks.Conversely,when residual stress is considered,these cracks become I-II composite cracks.Residual stress significantly alters the cumulative energy release rate of the three fracturemodes.Therefore,incorporating the influence of residual stress is essential when assessing the fatigue performance of corroded steel box girders in long-span bridges.展开更多
The present paper presents a historical review associated with the research works on hull girder strength of ship and ship-shaped structures.Then,a new program is developed to determine the ultimate vertical bending m...The present paper presents a historical review associated with the research works on hull girder strength of ship and ship-shaped structures.Then,a new program is developed to determine the ultimate vertical bending moment of hull girder by applying direct method,stress distribution method,and progressive collapse analysis method.Six ships and ship-shaped structures used in the benchmark study of International Ship and Offshore Structures Congress(ISSC) in 2012 are adopted as examples.The calculation results by applying the developed program are analyzed and compared with the existing results.Finally,the roles of the developed program and its further development are discussed.展开更多
In order to resolve the safety problem of the existing crane runway gir-ders(CRGs)with defects,the constraint-based R6 criterion is proposed to assess their structural integrity.The ex isting steel CRGs with defects a...In order to resolve the safety problem of the existing crane runway gir-ders(CRGs)with defects,the constraint-based R6 criterion is proposed to assess their structural integrity.The ex isting steel CRGs with defects at the weld joint between the upper flange and web plate,are characterized to three-dimensional finite element models with a semi-ellipse surface crack.The R6 criterion has been modified by considering the constraint effect which is represented by T-stress.The analysis results ilustrate that working condition of the cracked CRGs leads to high constraint level along the crack front.The crack aspect ratio(a/c)and run-way eccentricity(e)have significant influence on the integrity of the cracked CRGs.The integrity assessment results based on modified constraint-based R6 failure criterion enable to more effectively protect the cracked CRGs from brittle fracture failure.展开更多
Full-scale model tests were carried out on a 30 m span prestressed concrete box girder and a 20 m span prestressed concrete hollow slab. Failure models were prestressed reinforcement tensile failure and crashing of ro...Full-scale model tests were carried out on a 30 m span prestressed concrete box girder and a 20 m span prestressed concrete hollow slab. Failure models were prestressed reinforcement tensile failure and crashing of roof concrete, respectively. The ductility indexes of the box girder and hollow slab were 1.99 and 1.23, respectively, according to the energy viewpoint. Based on the horizontal section hypothesis, the nonlinear computation procedure was established using the limited banding law, and it could carry out the entire performance analysis including the unloading, mainly focusing on the ways to achieve the unloading curves computation through stress-strain, moment-curvature and load-displacement curves. Through the procedure, parameters that influence on the bearing capacity, deformation performance and ductility of the structures were analyzed. Those parameters were quantity of prestressed reinforcement and tension coefficients of prestressed reinforcement. From the analysis, some useful conclusions can be obtained.展开更多
Sutong Bridge is a cable-stayed bridge with a main span of 1 088 m. 370 high-precision stress monitoring measured data show that in the process of hoisting the steel box girders,the stress of the main girders is in th...Sutong Bridge is a cable-stayed bridge with a main span of 1 088 m. 370 high-precision stress monitoring measured data show that in the process of hoisting the steel box girders,the stress of the main girders is in the fluctuant and complex state and many meteorological factors,such as sunshine radiation,temperature and wind,have important influence on the change of stress of the steel box girders. According to the real-time weather data,the stress data after the process of wavelet denoising from representative measuring points in different weather conditions is picked to establish the stress response brought by meteorological factors with Layered Separation method,thereby basically eliminating the influence of meteorological factors on the stress of main girders,so that accurate and reliable stress data can be got for steel box girders adjustment and cable-tensioned construction control.展开更多
Stability tests of three plate girders laterally unbraced on both ends, which were scale models of real plate girders in heavy plants for tower-type boilers, are presented and investigated. The applicability of code p...Stability tests of three plate girders laterally unbraced on both ends, which were scale models of real plate girders in heavy plants for tower-type boilers, are presented and investigated. The applicability of code provisions in ANSI/AISC 360-10 about such members is discussed. A nonlinear finite element analysis was carried out, considering the combined effects of plasticity, residual stress and geometrical imperfections, to simulate the stability behavior of the specimens. The reliability of the numerical model was validated by comparisons with experimental results. The results show that stability behavior of plate girders with laterally unbraced ends is widely different from that of typical simply supported thin-walled beams. The structural response is also sensitive to initial geometrical imperfections of this objects. The model is used to improve the mechanical design of transverse stiffeners over the supports. The positive effect and offsetting influence of imperfections of thicker and additional transverse stiffeners on overall stability behavior are highlighted. A few suggestions for design process are also given.展开更多
Normal strength prestressed concrete I-girders are commonly used as the primary superstructure components in highway bridges. However, shear design guidelines for high strength PC girders are not available in the curr...Normal strength prestressed concrete I-girders are commonly used as the primary superstructure components in highway bridges. However, shear design guidelines for high strength PC girders are not available in the current structural codes. Recently, ten 7.62 m （25 feet） long girders made with high strength concrete were designed, cast, and tested at the University of Houston （UH） to study the ultimate shear strength and the shear concrete contribution （Vc） as a function of concrete strength （f＇c）. A simple semi-empirical set of equations was developed based on the test results to predict the ultimate shear strength of prestressed concrete I-girders. The UH-developed set of equations is a function of concrete strength （√f＇c）, web area （bwd）, shear span to effective depth ratio （a/d）, and percentage of transverse steel （Pt）. The proposed UH-Method was found to accurately predict the ultimate shear strength of PC girders with concrete strength up to 117 MPa （17000 psi） ensuring satisfactory ductility. The UH-Method was found to be not as overly conservative as the ACI-318 （2011） code provisions, and also not to overestimate the ultimate shear strength of high strength PC girders as the AASHTO LRFD （2010） code provisions. Moreover, the proposed UH-Method was found fairly accurate and not exceedingly conservative in predicting the concrete contribution to shear for concrete strength up to 117 MPa （17000 psi）.展开更多
基金The National Natural Science Foundation of China (No. 52368020)Gansu Provincial Universities Young Doctor Support Project (No. 2024QB-047)Gansu Province postdoctoral Fund (No. 386824)。
文摘To investigate the influence of the shear lag effect on the bending shear stress of single-box multicell box gird-ers(MCBG),the shear lag warping additional deflection is selected as the generalized displacement.The governing dif-ferential equations and boundary conditions for the shear lag of the MCBG are derived using the energy variational method.Based on the shear lag warping deformation state of the MCBG and by employing the microelement equilib-rium differential equation and the coordination conditions for shear lag warping deformation,the calculation method for the bending-warping shear stress of the MCBG is de-rived,and the influence of the width-to-span and height-to span ratios on bending-warping shear stress is analyzed.Ex-ample analysis shows that the bending-warping shear stress of the MCBG calculated by the proposed calculation method coincides with the finite element solution,and the warping shear stress satisfies the self-balancing condition of shear warping,thus verifying the accuracy of the proposed method.The warping shear stress exhibits an antisymmetric distribution about the vertical axis of symmetry and has a weakening effect on the shear stress of the elementary beam(EB).The larger the width-to-span ratio is,the larger the proportion of the warping shear stress of the EB.The larger the height-to-span ratio is,the smaller the proportion of the warping shear stress and the more significant the influence of the width-to-span ratio.The more the number of cells is,the smaller the influence of the warping shear stress on the total bending shear stress.The influence of the shear lag ef-fect can be ignored in the calculation of the bending shear stress of three or more cells in the MCBG.
基金supported by the National Natural Science Foundation of China(U22A20598,52279113)Key Research and Development Special Program of Henan Province(241111322500)Support Plan for University Science and Technology Innovation Team of Henan Province(24IRTSTHN009).
文摘This study examines the temperature field distribution characteristics and temperature effects during the prefabrication of composite box girders with corrugated steel webs(CBGCSWs),aiming to provide practical recommendations for controlling temperature-induced cracking and technical guidance for concrete mix proportions and placement processes.Based on field measurement data,a three-dimensional finite element model was developed to simulate the temperature effects at critical locations during the prefabrication phase.By varying the concrete mix proportions,initial casting temperature,and ambient temperature,the study elucidates the variation patterns of the temperature field during precast placement.The results show that the temperature rise caused by hydration heat increases with higher cement and fly ash content,whereas reducing cement and using minimal fly ash effectively lower the hydration temperature.However,the influence of fly ash on prestress losses should be carefully evaluated during the design phase.Higher initial casting temperatures accelerate hydration rates,leading to a rapid temperature rise.Significant differences between the initial casting and ambient temperatures result in larger residual temperature stresses.Based on concrete mix proportions,curing conditions,and ambient temperatures,three recommended casting temperature ranges were identified:5℃–10℃,10℃–25℃,and 25℃–30℃.Variations in the average ambient temperature affect the peak temperature of the hydration reaction and indirectly influence the final temperature distribution of the concrete structure.Optimizing the demolding time and applying geotextiles and water curing effectively reduces the peak temperature,maximum internal-to-surface temperature gradients,and surface tensile stresses,thereby mitigating the risk of temperature-induced cracking.
基金funded by the National Natural Science Foundation of China(Grant No.52108435)the Science and Technology Research Program of Chongqing Municipal Education Commission(Grant No.KJQN202404320)+1 种基金Chongqing Jiaotong University Postgraduate Research and Innovation Project(2024S0013)Chongqing Jiaotong University Undergraduate Innovation and Entrepreneurship Project(S202410618019).
文摘Streamlined box girders serve as a prevalent choice for the primary structural elements in large-span suspension bridge designs.With the increase in traffic demands,the design of such girders is evolving towards wider bridge decks and larger aspect ratios(B/D).To obtain more effective and aerodynamic design shapes for streamlined box girders,it is essential to investigate the impact of B/D on their aerodynamic performance.Accordingly,in this study we investigate the buffeting responses of large-span suspension bridges using girders of varying aspect ratios(B/D of 7.5,9.3,and 12.7).First,the aerodynamic coefficients of these girders are estimated using computational fluid dynamics(CFD)simulations.Subsequently,spatial finite element(FE)models of three long-span suspension bridges with different girders(B/D of 7.5,9.3,and 12.7)are established in Ansys software,and the dynamic characteristics of these bridges are obtained.Then,the time-domain buffeting analysis is performed by simulating the fluctuating wind fields acting on the bridge through the spectral representation method.Ultimately,the buffeting responses are computed using Ansys software,and the impact of B/D on these responses is assessed.The results reveal that the root mean square(RMS)values of the main girder’s buffeting displacement are highest at the midspan position and are lowest at the ends of the bridge.A decrease in B/D of the main girder leads to a more severe buffeting response because both the range and the effective value of the displacement increase with the decreasing B/D.Comparing the buffeting displacements in three directions,B/D plays a significant role in the vertical buffeting displacement,moderately impacts the torsional displacement,and has the least effect on the lateral displacement.The findings of this study may help wind resistance analysis and design optimization for bridges.
文摘The post buckling strength of web plate of I section plate girders is considered to resist the shear force in many other countries code for design of steel structures,while it has not been considered in the Chinese code GB J17-88.For the code revising,some important conclusions have been drawn through the theoretical analysis and experimental research of the post buckling strength of web plate of I section plate girders.
文摘A comparative study of two pre-stressed girder bridges, one with AASHTO （American Association of State Highway and Transportation Officials） Type III girders and the other with new FIB （Florida l-beam） girders, is presented. FIB girders are expected to provide increased lateral stiffness, higher load carrying capacity, cost-efficiency and better reliability. In this paper, the first bridge that is analyzed is a 3-span bridge designed with six AASHTO Type III girders, and the second bridge has four FIB girders with the same span length, width and girder depth. The bridges are analyzed for Florida state legal loads SU4 and C5. Both bridges are analyzed using a sophisticated finite element method. The deflections, moment envelopes, section capacity and live load rating of the two bridges are obtained and compared. FIB girders have higher vertical stiffness, higher section capacity providing higher load rating than the AASHTO girders.
基金Supported by Ministry of Metallurgical Industry of China
文摘The prosperous post buckling load capacity of web plates of box girders can be used.In this article,the post buckling behaviour of web plates of box girders under different loading conditions is theoretically analyzed and on the basis of domestic and overseas design codes of steel structures,the corresponding simplified analysis methods are put forward for the engineering design or code revision.It is proved that the simplified methods are safe,efficient and practicable through the comparison between several results.
基金Post-Doctoral Innovative Projects of Shandong Province(No.200703072)the National Natural Science Foundation of China(No.50574053)
文摘In order to analyze the load carrying capacity of prestressed concrete box girders, failure behaviors of in-situ deteriorated continuous prestressed concrete box girders under loading are experimentally observed and a finite failure analysis method for predicting behaviors of box girders is developed. A degenerated solid shell element is used to simulate box girders and material nonlinearity is considered. Since pre-stressed concrete box girders usually have a large number of curve prestressed tendons, a type of combined element is presented to simulate the prestressed tendons of box girders, and then the number of elements can be significantly reduced. The analytical results are compared with full-scale failure test results. The comparison shows that the presented method can be effectively applied to the failure analysis of in-situ continuous prestressed concrete box girders, and it also shows that the studied old bridge still has enough load carrying capacity.
基金Project(51551801)supported by the National Natural Science Foundation of ChinaProject(14JJ4062)supported by Natural Science Foundation of Hunan Province,China
文摘Long-term load and flexural failure experiments are carried out on two prestressed concrete(PC) simply supported box girders. In the long-term load experiment, girder-1(G1) is in an elastic state, while girder-2(G2) is in a cracking state. To investigate the influence of cracking on the flexural behaviors of PC simply supported box beams, the experiment results are analyzed from many aspects, such as load–deflection, load–strain, and failure mode. Experiment results show the following: 1) the shrinkage and creep of concrete have considerable influences on the long-term deflection and strain of the two girders; 2) in the flexural failure experiment, the cracks and ultimate loads of the two girders are close. The rigidity degeneration of G2 is significantly faster than that of G1, and thus G2 shows nonlinear characteristics earlier; 3) to prove the validity and rationality of the current code, the cracking load and ultimate load of the two girders are calculated according to the current code.
基金Projects(51078355,50938008) supported by the National Natural Science Foundation of ChinaProject(CX2011B093) supported by the Doctoral Candidate Research Innovation Program of Hunan Province, ChinaProject(20117Q008) supported by the Basic Scientific Research Funds for Central Universities of China
文摘Considering three longitudinal displacement functions and uniform axial displacement functions for shear lag effect and uniform axial deformation of thin-walled box girder with varying depths,a simple and efficient method with high precision to analyze the shear lag effect of thin-walled box girders was proposed.The governing differential equations and boundary conditions of the box girder under lateral loading were derived based on the energy-variational method,and closed-form solutions to stress and deflection corresponding to lateral loading were obtained.Analysis and calculations were carried out with respect to a trapezoidal box girder under concentrated loading or uniform loading and a rectangular box girder under concentrated loading.The analytical results were compared with numerical solutions derived according to the high order finite strip element method and the experimental results.The investigation shows that the closed-form solution is in good agreement with the numerical solutions derived according to the high order finite strip method and the experimental results,and has good stability.Because of the shear lag effect,the stress in cross-section centroid is no longer zero,thus it is not reasonable enough to assume that the strain in cross-section centroid is zero without considering uniform axial deformation.
基金This study was supported by the National Natural Science Foundation of China(Nos.51778534 and 51978580).
文摘Owning to good mechanical properties,steel–concrete composite(SCC)and prestressed concrete(PC)box girders are the types of elevated structures used most in urban rail transit.However,their vibro-acoustic differences are yet to be explored in depth,while structure-radiated noise is becoming a main concern in noise-sensitive environments.In this work,numerical simulation is used to investigate the vibration and noise characteristics of both types of box girders induced by running trains,and the numerical procedure is verified with data measured from a PC box girder.The mechanism of vibration transmission and vibro-acoustic comparisons between SCC and PC box girders are investigated in detail,revealing that more vibration and noise arise from SCC box girders.The vibration differences between them are around 7.7 dB(A)at the bottom plate,19.3 dB(A)at the web,and 6.7 dB(A)at the flange,while for structure-radiated noise,the difference is around 5.9 dB(A).Then,potential vibroacoustic control strategies for SCC box girders are discussed.As the vibro-acoustic responses of two types of girders are dominated by the force transmitted to the bridge deck,track isolation is better than structural enhancement.It is shown that using a floating track slab can make the vibration and noise of an SCC box girder lower than those of a PC box girder.However,structural enhancement for the SCC box girder is extremely limited in effects.The six proposed structural enhancement measures reduce vibration by only 1.1–3.6 dB(A) and noise by up to1.5 dB(A).
基金Sponsored by Northeast Forestry University (GRAM09) and Traffic Department of Heilongjiang Province
文摘Based on heat transfer theory,a two-dimensional complex exponential function was used to compute heat of concrete hydration.A concrete box girder consisting of a single box with two cells used on Harbin Songpu Bridge was measured on site.The two coefficients in the complex exponential function were determined to best fit the field measured data.ABAQUS program was used to simulate the heat transfer and determine the temperature distribution in the concrete box girders during concrete setting.The calculated temperature distribution in the box girders were compared with the field measured data and good agreement was observed.The temperature distribution and gradient in the entire box section,webs and bottom slab were analyzed using the measured and calculated results during the course of concrete hydration.
文摘The purpose of the present study is to investigate the influence of different types of shear connectors on mechanical behavior of composite steel and concrete girders under negative bending moment. Two overturned simply supported steel-concrete composite girders with different shear connectors including studs and PBLs （perfo-bond strips） were tested under point load in the mid-span. Based on the experimental observations, a three-dimensional FE （finite element） model capable of analyzing the composite girders subjected to negative bending moment was built. Load and deformation response, concrete initial cracking and composite girder ultimate load bearing capacity, strain development process of reinforcing bars before and after concrete cracking were observed in the test and compared with the numerical values. Results predicted by this modeling method are in good agreement with those obtained from the tests. Furthermore, the %rack closure＂ or ＂through crack＂ load were recorded by π-ganges in the tests and compared with the code-specified ultimate load.
文摘Based on the Finite Element Analysis and Thin Walled-Box girder Mechanics, two design concepts of adding box girders under main deck in order to increase the hull strength of ship are presented. By comparison and analysis on the longitudinal strength, torsion strength and deck buckling between designed concepts and the original concept, it is found that by adding box girders under the main deck, the weight of hull structure is increased by lower than 10%, but the stress on the plate of the main deck is reduced by about 10%, the stress on the plating of the second deck is reduced about 20%. The shear stress on the plating of both of the main deck and second deck is reduced, but the shear stresses in several nodes are increased. Also the capability of resisting damage to ship is obviously increased by adding box girders under the main deck. The deck buckling is also increased by more than 90%. Consequently, the box girders added under the main deck are useful and effective to increase the strength of hull and ship survivability.
基金supported by a grant from the Key Technologies Research and Development Program(No.2021YFF0602005)Jiangsu Key Research and Development Plan(Nos.BE2022129,BE2022134)the Fundamental Research Funds for the Central Universities(Nos.2242022k30031,2242022k30033),which are gratefully acknowledged.
文摘In order to investigate the fatigue performance of orthotropic anisotropic steel bridge decks,this study realizes the simulation of the welding process through elastic-plastic finite element theory,thermal-structural sequential coupling,and the birth-death element method.The simulated welding residual stresses are introduced into the multiscale finite element model of the bridge as the initial stress.Furthermore,the study explores the impact of residual stress on crack propagation in the fatigue-vulnerable components of the corroded steel box girder.The results indicate that fatigue cracks at the weld toe of the top deck,the weld root of the top deck,and the opening of the transverse diaphragm will not propagate under the action of a standard vehicle load.However,the inclusion of residual stress leads to the propagation of these cracks.When considering residual stress,the fatigue crack propagation paths at the weld toe of the transverse diaphragm and the U-rib weld toe align with those observed in actual bridges.In the absence of residual stress,the cracks at the toe of the transverse diaphragm with a 15%mass loss rate are categorized as type I cracks.Conversely,when residual stress is considered,these cracks become I-II composite cracks.Residual stress significantly alters the cumulative energy release rate of the three fracturemodes.Therefore,incorporating the influence of residual stress is essential when assessing the fatigue performance of corroded steel box girders in long-span bridges.
文摘The present paper presents a historical review associated with the research works on hull girder strength of ship and ship-shaped structures.Then,a new program is developed to determine the ultimate vertical bending moment of hull girder by applying direct method,stress distribution method,and progressive collapse analysis method.Six ships and ship-shaped structures used in the benchmark study of International Ship and Offshore Structures Congress(ISSC) in 2012 are adopted as examples.The calculation results by applying the developed program are analyzed and compared with the existing results.Finally,the roles of the developed program and its further development are discussed.
基金The works described in this paper are financially supported by the National Program on Key Research Project(2016YFC0701301-02),to which the authors are most grateful.
文摘In order to resolve the safety problem of the existing crane runway gir-ders(CRGs)with defects,the constraint-based R6 criterion is proposed to assess their structural integrity.The ex isting steel CRGs with defects at the weld joint between the upper flange and web plate,are characterized to three-dimensional finite element models with a semi-ellipse surface crack.The R6 criterion has been modified by considering the constraint effect which is represented by T-stress.The analysis results ilustrate that working condition of the cracked CRGs leads to high constraint level along the crack front.The crack aspect ratio(a/c)and run-way eccentricity(e)have significant influence on the integrity of the cracked CRGs.The integrity assessment results based on modified constraint-based R6 failure criterion enable to more effectively protect the cracked CRGs from brittle fracture failure.
基金National Natural Science Foundation of China(No.50678063)
文摘Full-scale model tests were carried out on a 30 m span prestressed concrete box girder and a 20 m span prestressed concrete hollow slab. Failure models were prestressed reinforcement tensile failure and crashing of roof concrete, respectively. The ductility indexes of the box girder and hollow slab were 1.99 and 1.23, respectively, according to the energy viewpoint. Based on the horizontal section hypothesis, the nonlinear computation procedure was established using the limited banding law, and it could carry out the entire performance analysis including the unloading, mainly focusing on the ways to achieve the unloading curves computation through stress-strain, moment-curvature and load-displacement curves. Through the procedure, parameters that influence on the bearing capacity, deformation performance and ductility of the structures were analyzed. Those parameters were quantity of prestressed reinforcement and tension coefficients of prestressed reinforcement. From the analysis, some useful conclusions can be obtained.
基金National "the 11th Five-Year" Science-Technological Support Program(No.2006BAG04B01)"973"Program(No.2002CB412707)
文摘Sutong Bridge is a cable-stayed bridge with a main span of 1 088 m. 370 high-precision stress monitoring measured data show that in the process of hoisting the steel box girders,the stress of the main girders is in the fluctuant and complex state and many meteorological factors,such as sunshine radiation,temperature and wind,have important influence on the change of stress of the steel box girders. According to the real-time weather data,the stress data after the process of wavelet denoising from representative measuring points in different weather conditions is picked to establish the stress response brought by meteorological factors with Layered Separation method,thereby basically eliminating the influence of meteorological factors on the stress of main girders,so that accurate and reliable stress data can be got for steel box girders adjustment and cable-tensioned construction control.
基金The authors gratefully acknowledge sponsors of this research： National Science Foundation of China （No. 51278296）.
文摘Stability tests of three plate girders laterally unbraced on both ends, which were scale models of real plate girders in heavy plants for tower-type boilers, are presented and investigated. The applicability of code provisions in ANSI/AISC 360-10 about such members is discussed. A nonlinear finite element analysis was carried out, considering the combined effects of plasticity, residual stress and geometrical imperfections, to simulate the stability behavior of the specimens. The reliability of the numerical model was validated by comparisons with experimental results. The results show that stability behavior of plate girders with laterally unbraced ends is widely different from that of typical simply supported thin-walled beams. The structural response is also sensitive to initial geometrical imperfections of this objects. The model is used to improve the mechanical design of transverse stiffeners over the supports. The positive effect and offsetting influence of imperfections of thicker and additional transverse stiffeners on overall stability behavior are highlighted. A few suggestions for design process are also given.
文摘Normal strength prestressed concrete I-girders are commonly used as the primary superstructure components in highway bridges. However, shear design guidelines for high strength PC girders are not available in the current structural codes. Recently, ten 7.62 m （25 feet） long girders made with high strength concrete were designed, cast, and tested at the University of Houston （UH） to study the ultimate shear strength and the shear concrete contribution （Vc） as a function of concrete strength （f＇c）. A simple semi-empirical set of equations was developed based on the test results to predict the ultimate shear strength of prestressed concrete I-girders. The UH-developed set of equations is a function of concrete strength （√f＇c）, web area （bwd）, shear span to effective depth ratio （a/d）, and percentage of transverse steel （Pt）. The proposed UH-Method was found to accurately predict the ultimate shear strength of PC girders with concrete strength up to 117 MPa （17000 psi） ensuring satisfactory ductility. The UH-Method was found to be not as overly conservative as the ACI-318 （2011） code provisions, and also not to overestimate the ultimate shear strength of high strength PC girders as the AASHTO LRFD （2010） code provisions. Moreover, the proposed UH-Method was found fairly accurate and not exceedingly conservative in predicting the concrete contribution to shear for concrete strength up to 117 MPa （17000 psi）.
