Nacre exhibits exceptional mechanical properties,which are attributed to its brick-mortar microstructure with an integration of stiff mineral platelets and soft organic interfaces.The rapidly developing 3D printing te...Nacre exhibits exceptional mechanical properties,which are attributed to its brick-mortar microstructure with an integration of stiff mineral platelets and soft organic interfaces.The rapidly developing 3D printing technique has been used to make nacreinspired composites with similar brick-mortar structure.It is known that the strain hardening phenomenon plays an important role in the high strength and toughness of natural nacre.However,the role of strain hardening on the mechanical properties of biomimetic nacreous composites still lacks theoretical evaluation and experimental confirmation.Based on a mesomechanical theoretical model,we derive the stress-strain response and macroscopic strength of the brick-mortar structure under uniaxial tension.The brick-mortar structure shows three typical failure modes,according to the occurrence of strain hardening and platelet fracture.Furthermore,we investigate how the occurrence of strain hardening depends on its geometry and constituent properties.It is found that increasing the aspect ratio of the platelets promotes strain hardening,while increasing the stiffness of the soft phase leads to the disappearance of strain hardening.Furthermore,we utilize bi-material 3D printing technology to prepare biomimetic nacre samples and conduct uniaxial tensile mechanical tests.We observe the occurrence of strain hardening with the increase in the length of the platelets,resulting in a significant increase in the strength and fracture strain of artificial nacre.Our result highlights the significant role of strain hardening in regulating the mechanical properties of nacre-like composite materials.展开更多
The study of BiFeO_(3)-0.3BaTiO_(3) ceramics has gained significant attention due to their high Curie temperature(TC≥450℃)and excellent piezoelectric properties(d33≥200 pC·N^(−1)).These are particularly pronou...The study of BiFeO_(3)-0.3BaTiO_(3) ceramics has gained significant attention due to their high Curie temperature(TC≥450℃)and excellent piezoelectric properties(d33≥200 pC·N^(−1)).These are particularly pronounced near the morphotropic phase boundary(MPB)region where coexisting rhombohedral and pseudocubic(R-PC)phases are observed.In addition,as the BaTiO_(3) content increases,BiFeO_(3)-BaTiO_(3) ceramics gradually become dominated by a single pseudocubic(PC-)phase.This shift results in a decrease in piezoelectric properties but an enhancement in strain performance.However,the underlying mechanism remains unclear.The high strain properties observed in non-MPB compositions provide a motivation for further investigation into these mechanisms.This paper presents a detailed analysis of the electric-field and temperature-induced domain structure evolution in BiFeO_(3)-0.4BaTiO_(3),which is predominately characterized by the PC phase.Piezoresponse force microscope(PFM)observations reveal the presence of nanodomains and stripy domains associated with polar nanoregions(PNRs),as well as relaxor ferroelectrics(RFEs)and/or ferroelectrics(FEs).The RFEs exhibit a significantly better strain response than the FEs,providing direct evidence for the enhanced strain properties of RFEs.Elevated-temperature Raman spectroscopy confirms a decrease in B-O bonding and BO6 deformation,along with an increase in structural symmetry,indicating the formation of RFEs and/or PNRs.The phase diagram shows the Burns temperature(TB),dielectric maxima temperature(Tm)and freezing temperature(Tf)evaluated from the dielectric spectra;the temperature-induced evolution of domain structures;and the sequential quasi-dielectric states:PNRs,RFEs and FEs.The evolution of the domain structure,including the morphology and ratio of FEs,RFEs and PNRs,induced by either electric-fields or temperature strongly affects the strain properties of RFEs.A superior piezoelectric coefficient of d33*=533 pm·V^(−1) at 40 kV·cm^(−1) and a large electric strain of Suni=0.285%are obtained.These results further validate that domain modulation can effectively enhance the strain properties of BiFeO_(3)-BaTiO_(3) ceramics,which makes them promising candidates for actuator applications.展开更多
The study of rock failure mechanisms is fundamental to geotechnical engineering,as it enhances design quality and mitigates disaster risks.This research employed in situ compression tests on 3D-printed rocklike sample...The study of rock failure mechanisms is fundamental to geotechnical engineering,as it enhances design quality and mitigates disaster risks.This research employed in situ compression tests on 3D-printed rocklike samples with a single flaw,combining Micro-CT scans and a specialized loading device to analyze their behavior.Mechanical properties and failure modes of these printed samples were compared to those of natural flawed sandstones,demonstrating the capability of 3D printing to replicate natural rock characteristics.By reconstructing 3D crack evolution from 2D CT images and applying digital volume correlation(DVC),the study visualized internal strain fields and established a relationship between strain patterns and rock failure.The results reveal that crack initiation consistently occurs at the flaw,advancing into tensile and secondary shear or mixed cracks.For flaw angles(α)ranging from 0°to 45°,the 3D-printed samples exhibited a higher number of newly formed cracks and a faster increase in crack volume with strain.In contrast,for flaw angles of 45°≤α≤90°,the opposite trend was observed.The internal strain field exhibited significant strain localization,with this uneven distribution playing a critical role in sample failure.When the flaw angle was in the range of 0°≤α≤30°,failure was primarily driven by tensile cracks,forming distinct tensile bands.Conversely,for 30°<α≤90°,a combination of tensile and shear cracks dominated the failure,producing both shear and tensile bands in the sample.Additionally,the strain field component ε_(yy) showed a strong correlation with the evolution of internal damage,providing valuable insights into the underlying rock failure mechanisms.展开更多
诺如病毒(Noroviruses,NoVs)是引起非菌型胃肠炎暴发流行的主要病原体之一。为了解我国GII.3型NoVs毒株的变异以及受体结合模式,本研究对来自2015年一起中国广州NoVs胃肠炎暴发的GII.3型毒株GZ31597株进行聚合酶区和完整VP1区基因扩增...诺如病毒(Noroviruses,NoVs)是引起非菌型胃肠炎暴发流行的主要病原体之一。为了解我国GII.3型NoVs毒株的变异以及受体结合模式,本研究对来自2015年一起中国广州NoVs胃肠炎暴发的GII.3型毒株GZ31597株进行聚合酶区和完整VP1区基因扩增、序列测定和序列分析,并表达VP1突出区蛋白(P蛋白),通过P蛋白与不同血型唾液样本的酶免疫分析法(EIA)测定实验确定其组织血型抗原(Histo-blood group antigens,HBGAs)结合模式。GZ31597株聚合酶和VP1基因系统进化分析表明,GZ31597株为GII.P12/GII.3-SubD基因型(聚合酶/衣壳区),该毒株较先前的GII.3毒株相比,在既是抗原表位又是HBGAs受体结合位点的氨基酸385残基发生了氨基酸转换。根据Western Blotting结果,证实P蛋白成功表达。唾液结合分析结果显示,该毒株P蛋白与A、B、AB、O型分泌型以及O型非分泌型唾液均可以结合,但结合值相对低。本研究表明该GII.P12/GII.3-SubD亚型的GII.3毒株在长期的流行过程中,通过氨基酸的转换,改变抗原性和受体结合活性,使GII.3型毒株在人群中继续流行。通过探索GII.3型NoVs在人群中长期广泛流行的原因,为GII.3型诺如病毒性胃肠炎的预防和控制提供重要依据。展开更多
Summary： Recently, suppressor of cytokine signaling-3 （SOCS3） has been shown to be an inducible endogenous negative regulator of Janus kinase/signal transducers and activators of transcription （JAK/STAT） pathway ...Summary： Recently, suppressor of cytokine signaling-3 （SOCS3） has been shown to be an inducible endogenous negative regulator of Janus kinase/signal transducers and activators of transcription （JAK/STAT） pathway which is relevant in inflammatory response, while its functions in acute liver failure and HBV-induced acute-on-chronic liver failure （HBV-ACLF） have not been fully elucidated. In this study, we explored the role of SOCS3 in the development of mouse hepatitis virus strain 3 （MHV-3）-induced acute liver failure and its expression in liver and peripheral blood mononuclear cells （PBMCs） of patients with HBV-ACLF. Inflammation-related gene expression was detected by real-time PCR, immtmohistochemistry and Western blotting. The correlation between SOCS3 level and liver injury was studied. Our results showed that the SOCS3 expression was significantly elevated in both the liver tissue and PBMCs from patients with HBV-ACLF compared to mild chronic hepatitis B （CHB）. Moreover, a time course study showed that SOCS3 level was increased remarkably in the liver of BALB/cJ mice at 72 h post-infection. Pro-inflammatory cytokines, interleukin （IL）-1 β, IL-6, and tumor necrosis factor （TNF）-α, were also increased significantly at 72 h post-infection. There was a close correlation between hepatic SOCS3 level and IL-6, and the severity of liver injury defined by alanine aminotransferase （ALT） and aspartate aminotransferase （AST） levels, respectively. These data suggested that SOCS3 may play a pivotal role in the pathogenesis of MHV-3-induced acute liver failure and HBV-ACLF.展开更多
Pseudomonas sp. strain WBC-3 utilized methyl parathion or para-nitrophenol (PNP) as the sole source of carbon, nitrogen, and energy, and methyl parathion hydrolase had been previously characterized. Its chemotactic be...Pseudomonas sp. strain WBC-3 utilized methyl parathion or para-nitrophenol (PNP) as the sole source of carbon, nitrogen, and energy, and methyl parathion hydrolase had been previously characterized. Its chemotactic behaviors to aromatics were investigated. The results indicated that strain WBC-3 was attracted to multiple aromatic compounds, including metabolizable or transformable substrates PNP, 4-nitrocatechol, and hydroquinone. Disruption of PNP catabolic genes had no e?ect on its chemotactic behaviors w...展开更多
This study was conducted to discuss the effect of rolling strain on microstructure and tensile properties of dual-phase Mg-8Li-3Al-2Zn-0.5 Y（wt%） alloy, which was prepared by casting, and then homogenized and rolled...This study was conducted to discuss the effect of rolling strain on microstructure and tensile properties of dual-phase Mg-8Li-3Al-2Zn-0.5 Y（wt%） alloy, which was prepared by casting, and then homogenized and rolled at 200℃. The rolling process was conducted with 10% reduction per pass and five different accumulated strains, varying from 10% to 70%. The results indicate that the as-cast and as-rolled Mg-8Li-3Al-2Zn-0.5Y alloys are composed of α-Mg, β-Li, AlLi and Al;Y phases. After rolling process,anisotropic microstructure was observed. a-Mg phase got elongated in both rolling direction and transverse direction with the addition of rolling strain. Consequently, the strength of the alloy in both directions was notably improved whereas the elongation declined, mainly caused by strain hardening and dispersion strengthening. The tensile properties of the as-rolled alloys in the RD, no matter the YS, UTS or the elongation, are higher than those of the TD due to their larger deformation strain and significant anisotropy in the hcp α-Mg phase. In addition, the fracture and strengthening mechanism of the tested alloys were also investigated systematically.展开更多
Semiconducting piezoelectricα-In_(2)Se_(3) and 3R MoS_(2) have attracted tremendous attention due to their unique electronic properties.Artificial van der Waals(vdWs)hetero-structures constructed withα-In_(2)Se_(3)a...Semiconducting piezoelectricα-In_(2)Se_(3) and 3R MoS_(2) have attracted tremendous attention due to their unique electronic properties.Artificial van der Waals(vdWs)hetero-structures constructed withα-In_(2)Se_(3)and 3R MoS_(2)flakes have shown promising applications in optoelectronics and photocatal-ysis.Here,we present the first flexibleα-In_(2)Se_(3)/3R MoS_(2)vdWs p-n heterojunction devices for photodetection from the visible to near infrared region.These heterojunction devices exhibit an ultrahigh photoresponsivity of 2.9×10^(3)A W^(−1) and a substantial specific detectivity of 6.2×10^(10) Jones under a compressive strain of−0.26%.The photocurrent can be increased by 64%under a tensile strain of+0.35%,due to the heterojunction energy band modulation by piezoelectric polarization charges at the hetero-junction interface.This work demonstrates a feasible approach to enhancement of α-In_(2)Se_(3)/3R MoS_(2) photoelectric response through an appropriate mechanical stimulus.展开更多
A constitutive model incorporating the influence of strain developed based on the Arrhenius equation by considering the variation of material constants as a fifth polynomial function of strain is presented. Materials ...A constitutive model incorporating the influence of strain developed based on the Arrhenius equation by considering the variation of material constants as a fifth polynomial function of strain is presented. Materials con- stants are fit to data from hot compression tests of 70Cr3Mo steel used for back-up roll at the temperatures from 1 173 to 1 473 K and strain rates from 0.01 to 10 s ~ by using a Gleeble-1500D thermo-mechanieal simulator. The de- veloped constitutive model is then used to predict the flow stress under all the tested conditions. The statistical pa- rameters of correlation coefficient and average absolute relative error are used to analyze the predictable efficiency and the values are 0. 997 and 3. 64%, respectively. The results show a good agreement between experimental stress and predicted stress.展开更多
Recently, two dimensional In Se attracts great attentions as potential hydrogen production photocatalysts.Here, comprehensive investigations on the hydrogen evolution reaction activity of In Se monolayer with3 d trans...Recently, two dimensional In Se attracts great attentions as potential hydrogen production photocatalysts.Here, comprehensive investigations on the hydrogen evolution reaction activity of In Se monolayer with3 d transition metal doping and biaxial strain were performed based on the density functional theory.Transition metal dopants significantly increase the bonding strength between H and Se, and then adjust the hydrogen adsorption free energy to 0.02 e V by Zn doping. The enhanced hydrogen evolution reaction activity results from less electron occupying H 1 s-Se 4 pzanti-bonding states, which is well correlated with the pzband center level. Importantly, the universal scalling law was proposed to descript the evolution of hydrogen adsorption free energy including both doping and strain effects. Moreover, with appropriate band alignment, optical absorption, and carriers separation ability, Zn doped In Se monolayer is considered as a promising candidate of visible-light photocatalyst for hydrogen production.展开更多
This manuscript presents the comprehensive study of thickness stretching effects on the free vibration,static stability and bending of multilayer functionally graded(FG)carbon nanotubes reinforced composite(CNTRC)nano...This manuscript presents the comprehensive study of thickness stretching effects on the free vibration,static stability and bending of multilayer functionally graded(FG)carbon nanotubes reinforced composite(CNTRC)nanoplates.The nanoscale and microstructure influences are considered through a modified nonlocal strain gradient continuum model.Based on power-law functions,four different patterns of CNTs distribution are considered in this analysis,a uniform distribution UD,FG-V CNTRC,FG-X CNTRC,and FG-O CNTRC.A 3D kinematic shear deformation theory is proposed to include the stretching influence,which is neglected in classical theories.Hamilton's principle is applied to derive the governing equations of motion and associated boundary conditions.Analytical solutions are developed based on Galerkin method to solve the governing equilibrium equations based on the generalized higher-order shear deformation theory and the nonlocal strain gradient theory and get the static bending,buckling loads,and natural frequencies of nanoplates.Verification with previous works is presented.A detailed parametric analysis is carried out to highlight the impact of thickness stretching,length scale parameter(nonlocal),material scale parameter(gradient),CNTs distribution pattern,geometry of the plate,various boundary conditions and the total number of layers on the stresses,deformation,critical buckling loads and vibration frequencies.Many new results are also reported in the current study,which will serve as a benchmark for future research.展开更多
MALDI-TOF-MS technology was used for identification of lipopeptide antibiotics producedby GEB3 strain, a derivative of Bacillus subtilis 168 which was transformed by lpaB3gene. The result showed GEB3 only produced lip...MALDI-TOF-MS technology was used for identification of lipopeptide antibiotics producedby GEB3 strain, a derivative of Bacillus subtilis 168 which was transformed by lpaB3gene. The result showed GEB3 only produced lipopeptide antibiotic surfactin. The analysisby LC-MS demonstrated that GEB3 produced standard surfactin isoforms with side chainlengths of 13,14 and 15 carbon atoms. The bioactivity detection of surfactin indicatedthat the surfactin produced by GEB3 had inhibition effect on plant pathogens Rhizoctoniasolani and Pyricularia oryzae.展开更多
Summary： The role of hepatic CD69＋ natural killer （NK） cells in virus-induced severe liver injury and subsequent hepatic failure is not well defined. In this study, a mouse model of fulminant liver failure （FHF）...Summary： The role of hepatic CD69＋ natural killer （NK） cells in virus-induced severe liver injury and subsequent hepatic failure is not well defined. In this study, a mouse model of fulminant liver failure （FHF） induced by murine hepatitis virus strain 3 （MHV-3） was used to study the role of hepatic CD69＋NK cells in the development of FHF. The CD69 expression in NK cells in the liver, spleen, bone marrow and peripheral blood was detected by using flow cytometry. The correlation between the CD69 level in hepatic NK cells and liver injury was studied. The functional marker （CD107a）, and activating and inhibitory receptor （NKG2D and NKG2A） expressed on CD69＋NK cells and CD69-NK cells were detected by using flow cytometry. Pro-inflammatory cytokines （IL-9, IFN-y and TNF-a） were also examined by using intracellular staining. After MHV-3 infection, the number of CD69＋NK cells in the liver of BALB/cJ mice was increased markedly and peaked at 72 h post-infection. Similar changes were also observed in the spleen, bone marrow and peripheral blood. Meanwhile, the CD69 expression in hepatic NK cells was highly correlated with the serum level of ALT and AST. The expression of CD107a and NKG2D, as well as the production of TNF-a, IFN-7 and IL-9 in hepatic CD69＋NK cells was all significantly up-regulated during 48-72 h post-infection. In contrast, the NKG2A expression was increased in hepatic CD69-NK cells but not in CD69＋NK cells. These results suggested that hepatic CD69＋NK cells play a pivotal role in the pathogenesis of FHF by enhancing degranulation and cytotoxic ability of NK cells and increasing the production of pro-inflammatory cytokines.展开更多
Idiomarina loihiensis was isolated from the salt works in Sfax (Tunisia), until now, the characterization of the GAPDH phosphorylante was never studied. Here, we report the isolation and the biochemical characterizati...Idiomarina loihiensis was isolated from the salt works in Sfax (Tunisia), until now, the characterization of the GAPDH phosphorylante was never studied. Here, we report the isolation and the biochemical characterization of glyceralehyde-3-phosphate dehydrogenase (GAPDH) fromI. loihiensis saline’s bacteria on the basis of the apparent native and subunit molecular weights, physico-chemical and kinetic characterizations. The purification method consisted of two steps, ammonium sulfate fractionation followed by one chromatographic step, namely dye-affinity on Blue Sepharose CL-6B. Polyclonal antibodies against the purified enzyme were used to recognize theI. loihiensis GAPDH by Western blotting. The optimum pH of the purified enzyme was 8.5. Studies on the effect of temperatures revealed an enzyme increasing activity of about 45?C. The molecular weight of the purified enzyme was 36 kDa determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Non-denaturing polyacrylamide gels yield a molecular weight of 147 kDa. The Michaelis constants for NAD+ and D-glyceraldehyde-3-phosphate estimated was 19 μM and 3.1 μM, respectively. The maximal velocity of the purified enzyme was estimated to be 2.06 U/mg, approximately 6-fold increase in specific activity and a final yield of approximately 32.5%. The physicochemical properties of this GAPDH, being characterized, could be used in further studies.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.12372325).
文摘Nacre exhibits exceptional mechanical properties,which are attributed to its brick-mortar microstructure with an integration of stiff mineral platelets and soft organic interfaces.The rapidly developing 3D printing technique has been used to make nacreinspired composites with similar brick-mortar structure.It is known that the strain hardening phenomenon plays an important role in the high strength and toughness of natural nacre.However,the role of strain hardening on the mechanical properties of biomimetic nacreous composites still lacks theoretical evaluation and experimental confirmation.Based on a mesomechanical theoretical model,we derive the stress-strain response and macroscopic strength of the brick-mortar structure under uniaxial tension.The brick-mortar structure shows three typical failure modes,according to the occurrence of strain hardening and platelet fracture.Furthermore,we investigate how the occurrence of strain hardening depends on its geometry and constituent properties.It is found that increasing the aspect ratio of the platelets promotes strain hardening,while increasing the stiffness of the soft phase leads to the disappearance of strain hardening.Furthermore,we utilize bi-material 3D printing technology to prepare biomimetic nacre samples and conduct uniaxial tensile mechanical tests.We observe the occurrence of strain hardening with the increase in the length of the platelets,resulting in a significant increase in the strength and fracture strain of artificial nacre.Our result highlights the significant role of strain hardening in regulating the mechanical properties of nacre-like composite materials.
基金supported by the National Key Research and Development Program(No.2022YFB3807400)the National Natural Science Foundation of China(Nos.52072028 and 52032007).
文摘The study of BiFeO_(3)-0.3BaTiO_(3) ceramics has gained significant attention due to their high Curie temperature(TC≥450℃)and excellent piezoelectric properties(d33≥200 pC·N^(−1)).These are particularly pronounced near the morphotropic phase boundary(MPB)region where coexisting rhombohedral and pseudocubic(R-PC)phases are observed.In addition,as the BaTiO_(3) content increases,BiFeO_(3)-BaTiO_(3) ceramics gradually become dominated by a single pseudocubic(PC-)phase.This shift results in a decrease in piezoelectric properties but an enhancement in strain performance.However,the underlying mechanism remains unclear.The high strain properties observed in non-MPB compositions provide a motivation for further investigation into these mechanisms.This paper presents a detailed analysis of the electric-field and temperature-induced domain structure evolution in BiFeO_(3)-0.4BaTiO_(3),which is predominately characterized by the PC phase.Piezoresponse force microscope(PFM)observations reveal the presence of nanodomains and stripy domains associated with polar nanoregions(PNRs),as well as relaxor ferroelectrics(RFEs)and/or ferroelectrics(FEs).The RFEs exhibit a significantly better strain response than the FEs,providing direct evidence for the enhanced strain properties of RFEs.Elevated-temperature Raman spectroscopy confirms a decrease in B-O bonding and BO6 deformation,along with an increase in structural symmetry,indicating the formation of RFEs and/or PNRs.The phase diagram shows the Burns temperature(TB),dielectric maxima temperature(Tm)and freezing temperature(Tf)evaluated from the dielectric spectra;the temperature-induced evolution of domain structures;and the sequential quasi-dielectric states:PNRs,RFEs and FEs.The evolution of the domain structure,including the morphology and ratio of FEs,RFEs and PNRs,induced by either electric-fields or temperature strongly affects the strain properties of RFEs.A superior piezoelectric coefficient of d33*=533 pm·V^(−1) at 40 kV·cm^(−1) and a large electric strain of Suni=0.285%are obtained.These results further validate that domain modulation can effectively enhance the strain properties of BiFeO_(3)-BaTiO_(3) ceramics,which makes them promising candidates for actuator applications.
基金supported by the Korea Institute of Energy Technology Evaluation and Planning(KETEP)grant funded by the Korea Government(MOTIE)(Grant No.20214000000500,Training program of CCUS for the green growth)by the National Research Foundation of Korea(NRF)grant funded by the Korea Government(MSIT)(Grant No.2022R1F1A1076409)the support from the Chinese Scholarship Council for awarding a scholarship(CSC No.202106820011).
文摘The study of rock failure mechanisms is fundamental to geotechnical engineering,as it enhances design quality and mitigates disaster risks.This research employed in situ compression tests on 3D-printed rocklike samples with a single flaw,combining Micro-CT scans and a specialized loading device to analyze their behavior.Mechanical properties and failure modes of these printed samples were compared to those of natural flawed sandstones,demonstrating the capability of 3D printing to replicate natural rock characteristics.By reconstructing 3D crack evolution from 2D CT images and applying digital volume correlation(DVC),the study visualized internal strain fields and established a relationship between strain patterns and rock failure.The results reveal that crack initiation consistently occurs at the flaw,advancing into tensile and secondary shear or mixed cracks.For flaw angles(α)ranging from 0°to 45°,the 3D-printed samples exhibited a higher number of newly formed cracks and a faster increase in crack volume with strain.In contrast,for flaw angles of 45°≤α≤90°,the opposite trend was observed.The internal strain field exhibited significant strain localization,with this uneven distribution playing a critical role in sample failure.When the flaw angle was in the range of 0°≤α≤30°,failure was primarily driven by tensile cracks,forming distinct tensile bands.Conversely,for 30°<α≤90°,a combination of tensile and shear cracks dominated the failure,producing both shear and tensile bands in the sample.Additionally,the strain field component ε_(yy) showed a strong correlation with the evolution of internal damage,providing valuable insights into the underlying rock failure mechanisms.
文摘诺如病毒(Noroviruses,NoVs)是引起非菌型胃肠炎暴发流行的主要病原体之一。为了解我国GII.3型NoVs毒株的变异以及受体结合模式,本研究对来自2015年一起中国广州NoVs胃肠炎暴发的GII.3型毒株GZ31597株进行聚合酶区和完整VP1区基因扩增、序列测定和序列分析,并表达VP1突出区蛋白(P蛋白),通过P蛋白与不同血型唾液样本的酶免疫分析法(EIA)测定实验确定其组织血型抗原(Histo-blood group antigens,HBGAs)结合模式。GZ31597株聚合酶和VP1基因系统进化分析表明,GZ31597株为GII.P12/GII.3-SubD基因型(聚合酶/衣壳区),该毒株较先前的GII.3毒株相比,在既是抗原表位又是HBGAs受体结合位点的氨基酸385残基发生了氨基酸转换。根据Western Blotting结果,证实P蛋白成功表达。唾液结合分析结果显示,该毒株P蛋白与A、B、AB、O型分泌型以及O型非分泌型唾液均可以结合,但结合值相对低。本研究表明该GII.P12/GII.3-SubD亚型的GII.3毒株在长期的流行过程中,通过氨基酸的转换,改变抗原性和受体结合活性,使GII.3型毒株在人群中继续流行。通过探索GII.3型NoVs在人群中长期广泛流行的原因,为GII.3型诺如病毒性胃肠炎的预防和控制提供重要依据。
基金supported by the grants from the National Science Foundation of China Advanced Program(No.NSFC81171558,NSFC81271808 and NSFC81030007)Innovation Team Development Plan of the Ministry of Education of China[No.IRT1131(2011)]National Twelfth-Five Years Project in Science and Technology of China(No.2013ZX10002-003)
文摘Summary： Recently, suppressor of cytokine signaling-3 （SOCS3） has been shown to be an inducible endogenous negative regulator of Janus kinase/signal transducers and activators of transcription （JAK/STAT） pathway which is relevant in inflammatory response, while its functions in acute liver failure and HBV-induced acute-on-chronic liver failure （HBV-ACLF） have not been fully elucidated. In this study, we explored the role of SOCS3 in the development of mouse hepatitis virus strain 3 （MHV-3）-induced acute liver failure and its expression in liver and peripheral blood mononuclear cells （PBMCs） of patients with HBV-ACLF. Inflammation-related gene expression was detected by real-time PCR, immtmohistochemistry and Western blotting. The correlation between SOCS3 level and liver injury was studied. Our results showed that the SOCS3 expression was significantly elevated in both the liver tissue and PBMCs from patients with HBV-ACLF compared to mild chronic hepatitis B （CHB）. Moreover, a time course study showed that SOCS3 level was increased remarkably in the liver of BALB/cJ mice at 72 h post-infection. Pro-inflammatory cytokines, interleukin （IL）-1 β, IL-6, and tumor necrosis factor （TNF）-α, were also increased significantly at 72 h post-infection. There was a close correlation between hepatic SOCS3 level and IL-6, and the severity of liver injury defined by alanine aminotransferase （ALT） and aspartate aminotransferase （AST） levels, respectively. These data suggested that SOCS3 may play a pivotal role in the pathogenesis of MHV-3-induced acute liver failure and HBV-ACLF.
基金the Hi-Tech Research and Development Program (863) of China (No.2006AA10Z403)the Knowledge Innovation Program ofthe Chinese Academy of Sciences (No. KSCX2-YW-G-009)the National Natural Science Foundation ofChina (No. 30570021)
文摘Pseudomonas sp. strain WBC-3 utilized methyl parathion or para-nitrophenol (PNP) as the sole source of carbon, nitrogen, and energy, and methyl parathion hydrolase had been previously characterized. Its chemotactic behaviors to aromatics were investigated. The results indicated that strain WBC-3 was attracted to multiple aromatic compounds, including metabolizable or transformable substrates PNP, 4-nitrocatechol, and hydroquinone. Disruption of PNP catabolic genes had no e?ect on its chemotactic behaviors w...
基金supported by the National Key Research and Development Program of China(No.2016YFB0301004)the National Natural Science Foundation of China(No.51771115)+1 种基金the Science and Technology Innovation Project(No.009-031-001)Research Program of Joint Research Center of Advanced Spaceflight Technologies(Nos.USCAST2015-25 and USCAST2016-18)
文摘This study was conducted to discuss the effect of rolling strain on microstructure and tensile properties of dual-phase Mg-8Li-3Al-2Zn-0.5 Y（wt%） alloy, which was prepared by casting, and then homogenized and rolled at 200℃. The rolling process was conducted with 10% reduction per pass and five different accumulated strains, varying from 10% to 70%. The results indicate that the as-cast and as-rolled Mg-8Li-3Al-2Zn-0.5Y alloys are composed of α-Mg, β-Li, AlLi and Al;Y phases. After rolling process,anisotropic microstructure was observed. a-Mg phase got elongated in both rolling direction and transverse direction with the addition of rolling strain. Consequently, the strength of the alloy in both directions was notably improved whereas the elongation declined, mainly caused by strain hardening and dispersion strengthening. The tensile properties of the as-rolled alloys in the RD, no matter the YS, UTS or the elongation, are higher than those of the TD due to their larger deformation strain and significant anisotropy in the hcp α-Mg phase. In addition, the fracture and strengthening mechanism of the tested alloys were also investigated systematically.
基金MOE AcRF Tier2(2018-T2-2-005),MOE AcRF Tier1(2018-T1-005-001)A^(*)STAR AME IRG Grant SERC A1983c0027,Singapore.
文摘Semiconducting piezoelectricα-In_(2)Se_(3) and 3R MoS_(2) have attracted tremendous attention due to their unique electronic properties.Artificial van der Waals(vdWs)hetero-structures constructed withα-In_(2)Se_(3)and 3R MoS_(2)flakes have shown promising applications in optoelectronics and photocatal-ysis.Here,we present the first flexibleα-In_(2)Se_(3)/3R MoS_(2)vdWs p-n heterojunction devices for photodetection from the visible to near infrared region.These heterojunction devices exhibit an ultrahigh photoresponsivity of 2.9×10^(3)A W^(−1) and a substantial specific detectivity of 6.2×10^(10) Jones under a compressive strain of−0.26%.The photocurrent can be increased by 64%under a tensile strain of+0.35%,due to the heterojunction energy band modulation by piezoelectric polarization charges at the hetero-junction interface.This work demonstrates a feasible approach to enhancement of α-In_(2)Se_(3)/3R MoS_(2) photoelectric response through an appropriate mechanical stimulus.
文摘A constitutive model incorporating the influence of strain developed based on the Arrhenius equation by considering the variation of material constants as a fifth polynomial function of strain is presented. Materials con- stants are fit to data from hot compression tests of 70Cr3Mo steel used for back-up roll at the temperatures from 1 173 to 1 473 K and strain rates from 0.01 to 10 s ~ by using a Gleeble-1500D thermo-mechanieal simulator. The de- veloped constitutive model is then used to predict the flow stress under all the tested conditions. The statistical pa- rameters of correlation coefficient and average absolute relative error are used to analyze the predictable efficiency and the values are 0. 997 and 3. 64%, respectively. The results show a good agreement between experimental stress and predicted stress.
基金supported by the National Natural Science Foundation of China(11804023)the Natural Science Foundation of Tianjin(18JCQNJC02700)。
文摘Recently, two dimensional In Se attracts great attentions as potential hydrogen production photocatalysts.Here, comprehensive investigations on the hydrogen evolution reaction activity of In Se monolayer with3 d transition metal doping and biaxial strain were performed based on the density functional theory.Transition metal dopants significantly increase the bonding strength between H and Se, and then adjust the hydrogen adsorption free energy to 0.02 e V by Zn doping. The enhanced hydrogen evolution reaction activity results from less electron occupying H 1 s-Se 4 pzanti-bonding states, which is well correlated with the pzband center level. Importantly, the universal scalling law was proposed to descript the evolution of hydrogen adsorption free energy including both doping and strain effects. Moreover, with appropriate band alignment, optical absorption, and carriers separation ability, Zn doped In Se monolayer is considered as a promising candidate of visible-light photocatalyst for hydrogen production.
基金supported by The Algerian General Directorate of Scientific Research and Technological Development(DGRSDT)University of Mustapha Stambouli of Mascara(UMS Mascara)in Algeria。
文摘This manuscript presents the comprehensive study of thickness stretching effects on the free vibration,static stability and bending of multilayer functionally graded(FG)carbon nanotubes reinforced composite(CNTRC)nanoplates.The nanoscale and microstructure influences are considered through a modified nonlocal strain gradient continuum model.Based on power-law functions,four different patterns of CNTs distribution are considered in this analysis,a uniform distribution UD,FG-V CNTRC,FG-X CNTRC,and FG-O CNTRC.A 3D kinematic shear deformation theory is proposed to include the stretching influence,which is neglected in classical theories.Hamilton's principle is applied to derive the governing equations of motion and associated boundary conditions.Analytical solutions are developed based on Galerkin method to solve the governing equilibrium equations based on the generalized higher-order shear deformation theory and the nonlocal strain gradient theory and get the static bending,buckling loads,and natural frequencies of nanoplates.Verification with previous works is presented.A detailed parametric analysis is carried out to highlight the impact of thickness stretching,length scale parameter(nonlocal),material scale parameter(gradient),CNTs distribution pattern,geometry of the plate,various boundary conditions and the total number of layers on the stresses,deformation,critical buckling loads and vibration frequencies.Many new results are also reported in the current study,which will serve as a benchmark for future research.
基金supported by the National Nature1 Science Foundation of China(30170623)the National 863 Program of China(2001AA246013).
文摘MALDI-TOF-MS technology was used for identification of lipopeptide antibiotics producedby GEB3 strain, a derivative of Bacillus subtilis 168 which was transformed by lpaB3gene. The result showed GEB3 only produced lipopeptide antibiotic surfactin. The analysisby LC-MS demonstrated that GEB3 produced standard surfactin isoforms with side chainlengths of 13,14 and 15 carbon atoms. The bioactivity detection of surfactin indicatedthat the surfactin produced by GEB3 had inhibition effect on plant pathogens Rhizoctoniasolani and Pyricularia oryzae.
基金supported by the grants from the National Natural Science Funds for Young Scholar(No.81100308)the National Science Foundation of China Advanced Program(No.NSFC 81030007,and No.NSFC81171558)
文摘Summary： The role of hepatic CD69＋ natural killer （NK） cells in virus-induced severe liver injury and subsequent hepatic failure is not well defined. In this study, a mouse model of fulminant liver failure （FHF） induced by murine hepatitis virus strain 3 （MHV-3） was used to study the role of hepatic CD69＋NK cells in the development of FHF. The CD69 expression in NK cells in the liver, spleen, bone marrow and peripheral blood was detected by using flow cytometry. The correlation between the CD69 level in hepatic NK cells and liver injury was studied. The functional marker （CD107a）, and activating and inhibitory receptor （NKG2D and NKG2A） expressed on CD69＋NK cells and CD69-NK cells were detected by using flow cytometry. Pro-inflammatory cytokines （IL-9, IFN-y and TNF-a） were also examined by using intracellular staining. After MHV-3 infection, the number of CD69＋NK cells in the liver of BALB/cJ mice was increased markedly and peaked at 72 h post-infection. Similar changes were also observed in the spleen, bone marrow and peripheral blood. Meanwhile, the CD69 expression in hepatic NK cells was highly correlated with the serum level of ALT and AST. The expression of CD107a and NKG2D, as well as the production of TNF-a, IFN-7 and IL-9 in hepatic CD69＋NK cells was all significantly up-regulated during 48-72 h post-infection. In contrast, the NKG2A expression was increased in hepatic CD69-NK cells but not in CD69＋NK cells. These results suggested that hepatic CD69＋NK cells play a pivotal role in the pathogenesis of FHF by enhancing degranulation and cytotoxic ability of NK cells and increasing the production of pro-inflammatory cytokines.
文摘Idiomarina loihiensis was isolated from the salt works in Sfax (Tunisia), until now, the characterization of the GAPDH phosphorylante was never studied. Here, we report the isolation and the biochemical characterization of glyceralehyde-3-phosphate dehydrogenase (GAPDH) fromI. loihiensis saline’s bacteria on the basis of the apparent native and subunit molecular weights, physico-chemical and kinetic characterizations. The purification method consisted of two steps, ammonium sulfate fractionation followed by one chromatographic step, namely dye-affinity on Blue Sepharose CL-6B. Polyclonal antibodies against the purified enzyme were used to recognize theI. loihiensis GAPDH by Western blotting. The optimum pH of the purified enzyme was 8.5. Studies on the effect of temperatures revealed an enzyme increasing activity of about 45?C. The molecular weight of the purified enzyme was 36 kDa determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Non-denaturing polyacrylamide gels yield a molecular weight of 147 kDa. The Michaelis constants for NAD+ and D-glyceraldehyde-3-phosphate estimated was 19 μM and 3.1 μM, respectively. The maximal velocity of the purified enzyme was estimated to be 2.06 U/mg, approximately 6-fold increase in specific activity and a final yield of approximately 32.5%. The physicochemical properties of this GAPDH, being characterized, could be used in further studies.
