The tiered geosynthetic-reinforced soil (GRS) walls have been increasingly applied in the high and steep retaining soil structures. However, very little is known about the design method for the tiered GRS wall in prac...The tiered geosynthetic-reinforced soil (GRS) walls have been increasingly applied in the high and steep retaining soil structures. However, very little is known about the design method for the tiered GRS wall in practice. This study is aimed at proposing an upper-bound stability analysis method of a tiered GRS wall. The proposed method was firstly validated by the existing results from the centrifuge test and the numerical method, and then a parametric study was performed to investigate the effects of the cohesionless backfill friction angle φ1 and the wall geometric parameters including the offset distance, the total wall height, the batter angle δ, the number of tiers n, and wall height ratio of adjacent tiers on the dimensionless equivalent earth pressure coefficient KT. The analysis results demonstrated that as the φ1 increases, the shear strength of backfill is enhanced and thus the KT or the total reinforcement tensile force decreases, and the KT decreases with the increase of the offset distance at the initial stage and then becomes stable when it reaches a certain critical value. For a fixed offset distance, the KT or the total reinforcement tensile force decreases with the increase of the δ. For the two-tiered GRS walls having the offset distance less than the critical value, the wall with the smaller wall height ratio has a larger KT. Further, the variation of the location of the critical failure surfaces of tiered GRS walls was presented in this study with the variation of the φ1 and the wall geometry.展开更多
Geosynthetic-encased stone column(GESC)technology for strengthening soft clay offers significant advantages in terms of cost-effectiveness,environmental sustainability,and engineering applicability.It is widely applie...Geosynthetic-encased stone column(GESC)technology for strengthening soft clay offers significant advantages in terms of cost-effectiveness,environmental sustainability,and engineering applicability.It is widely applied in treating soft foundations for railways,bridges,and embankments.This study evaluates the cyclic response of the geosynthetic-encased steel slag column(GESSC)composite foundation employing three-dimensional nonlinear finite element analysis.A numerical study is conducted to assess the cyclic response of floating GESSC considering the influence of key design variables,including cyclic load amplitude,loading frequency,geosynthetic encasement stiffness,and length-to-diameter ratio.Results show that both cyclic load amplitude and frequency affect the cumulative settlement and excess pore pressure within the GESSC foundation.Within specified limits,increasing the encasement stiffness and column length can significantly improve the GESSC load-bearing characteristics.The parametric study suggests an optimal geosynthetic encasement stiffness for the field prototype columns within the range of 4480–5760 kN/m and a critical steel slag column length of 10 times the column diameter.展开更多
To date,few models are available in the literature to consider the creep behavior of geosynthetics when predicting the lateral deformation(d)of geosynthetics-reinforced soil(GRS)retaining walls.In this study,a general...To date,few models are available in the literature to consider the creep behavior of geosynthetics when predicting the lateral deformation(d)of geosynthetics-reinforced soil(GRS)retaining walls.In this study,a general hyperbolic creep model was first introduced to describe the long-term deformation of geosynthetics,which is a function of elapsed time and two empirical parameters a and b.The conventional creep tests with three different tensile loads(Pr)were conducted on two uniaxial geogrids to determine their creep behavior,as well as the a-Pr and b-Pr relationships.The test results show that increasing Pr accelerates the development of creep deformation for both geogrids.Meanwhile,a and b respectively show exponential and negatively linear relationships with Pr,which were confirmed by abundant experimental data available in other studies.Based on the above creep model and relationships,an accurate and reliable analytical model was then proposed for predicting the time-dependent d of GRS walls with modular block facing,which was further validated using a relevant numerical investigation from the previous literature.Performance evaluation and comparison of the proposed model with six available prediction models were performed.Then a parametric study was carried out to evaluate the effects of wall height,vertical spacing of geogrids,unit weight and internal friction angle of backfills,and factor of safety against pullout on d at the end of construction and 5 years afterwards.The findings show that the creep effect not only promotes d but also raises the elevation of the maximum d along the wall height.Finally,the limitations and application prospects of the proposed model were discussed and analyzed.展开更多
A stable surface to move manpower and equipment is a key for the construction operations. To create a stable road surface, the road construction techniques are time-consuming and expensive for a traditional constructi...A stable surface to move manpower and equipment is a key for the construction operations. To create a stable road surface, the road construction techniques are time-consuming and expensive for a traditional construction which requires compaction of soil, aggregate base, sub-base and asphaltic layers. A Geosynthetic Access Mat (GAM) system can serve as an alternative to other traditional construction techniques to accommodate temporary construction. Due to its rigidity, the mat system can provide substantial vertical resistance to the applied load under a large deflection subject to soil conditions. This paper provides details of GAM specifications, soil conditions, applications, installation procedure, comparison with other soil stabilization methods and Aramco experience for deployments of these mats.展开更多
Geosynthetic-reinforced and pile-supported （GRPS） embankment has been increasingly constructed in a large number of regions and for a wide range of projects in the past decades. However, many disadvantages are expos...Geosynthetic-reinforced and pile-supported （GRPS） embankment has been increasingly constructed in a large number of regions and for a wide range of projects in the past decades. However, many disadvantages are exposed through a lot of applications on conventional technique of GRPS embankment （called CT embankment）, i.e., intolerable settlement and lateral displacement, low geosynthetic efficiency, etc. In view of these disadvantages, the fixed geosynthetic technique of GRPS embankment （called FGT embankment） is developed in this work. In this system, the geosynthetic is fixed on the pile head by the steel bar fulcrum and concrete fixed top. The principles and construction techniques involved in the FGT embankment are described firstly. Then, the numerical analysis method and two-stage analysis method are used to study the performance of FGT embankment, respectively. It is shown that the FGT embankment can provide a better improvement technique to construct a high embankment over soft ground.展开更多
The reinforcement effects of geosynthetics in thick soft subsoil case and thin soft subsoil case are studied in this paper,and a Duncan Chang nonlinear numerical model based on the finite element method (FEM) is deve...The reinforcement effects of geosynthetics in thick soft subsoil case and thin soft subsoil case are studied in this paper,and a Duncan Chang nonlinear numerical model based on the finite element method (FEM) is developed.Moreover,an important conclusion that the thickness of soft subsoil affects greatly the geotechnical behavior of geosynthetic reinforced embankments is drawn.A series of embankment built on soft subsoil is calculated using the FEM program.The results of the computer program,such as the lateral displacements,settlements,and stress level and shear stresses in the subsoil,are presented in great detail and the comparison of those results disposes clearly the huge discrepancy of reinforce benefit between the thick subsoil embankment and thin subsoil embankment.Reinforcement mechanism of geosynthetics is also discussed in this paper and several conclusions are reached.This paper also gives recommendations for design.展开更多
Dense pre-hydrated geosynthetic clay liners(DPH GCLs)were manufactured as innovative materials accompanied by the advantage of lower hydraulic conductivity(k).The k of DPH GCLs permeated with de-ionized water(DIW)was ...Dense pre-hydrated geosynthetic clay liners(DPH GCLs)were manufactured as innovative materials accompanied by the advantage of lower hydraulic conductivity(k).The k of DPH GCLs permeated with de-ionized water(DIW)was 9.8×10^(−12) m/s.The effect of Cu^(2+)synthetic solution on DPH GCLs was discussed.Furthermore,the effect mechanism was studied on the basis of test technologies.A significant adverse impact on hydraulic performance of DPH GCLs is found when the concentration of Cu^(2+)is greater than 1 g/L.SEM,XRD,XRF,FTIR,and XPS analyses show that the effect of Cu^(2+)on DPH GCLs includes two steps.Firstly,Cu^(2+)interacts with hydrophobic organic matter(HOM),and the adhesion of bentonite is destroyed,and some holes appear.The Cu^(2+)contacts with bentonite directly,and Cu^(2+)interacts with bentonite through ion exchange.Passivated phenomenon occurs on the surface of the bentonite,and swelling ability of bentonite is reduced,which causes permeable DPH GCLs.展开更多
In this paper,more than 70 large-scale pullout tests were performed to evaluate the performance of an innovative composite geosynthetic strip(CGS)reinforcement in sandy backfill.The CGS reinforcement is composed of a ...In this paper,more than 70 large-scale pullout tests were performed to evaluate the performance of an innovative composite geosynthetic strip(CGS)reinforcement in sandy backfill.The CGS reinforcement is composed of a geosynthetic strip(GS)and parts of a scrap truck tire as transverse members.The experimental pullout results for the CGS reinforcement were compared with the suggested theoretical equations and ordinary reinforcements,including the GS,the steel strip(SS),and the steel strip with rib(SSR).The pullout test results show that adding three transverse members to the GS reinforcement(CGS3)with S/H?6.6(where S and H are the space and height of the transverse members,respectively)increases pullout resistance by more than 120%,170%,and 50%compared to the GS,the SS,and the SSR,respectively.This result shows that the CGS3(CGS with three transverse members)reinforcement needs at least 55.5%,63%,and 33.3%smaller length compared to the GS,the SS,and the SSR,respectively.In general,implementation of mechanically stabilized earth wall(MSEW)with the proposed strip may help geotechnical engineers prevent costly designs and solve the problem of MSEW implementation in cases where there are limitations of space.展开更多
An understanding of how different land covers affect soil erosion caused by rainfall is necessary in mountainous areas.The land cover usually plays an important role in controlling landslide hazards associated with th...An understanding of how different land covers affect soil erosion caused by rainfall is necessary in mountainous areas.The land cover usually plays an important role in controlling landslide hazards associated with these terrains.This paper presents the results of a field experiment where several types of land covers were placed on a full-scale embankment as erosion control.An 8 m wide,21 m long,and 3 m high embankment with a 45°side-slope was built with lateric soil.The soil was compacted under a relative compaction of 70%to simulate a natural soil slope.Two sides of the embankment were divided into six land cover areas,with three different areas of bare soil,and one each of a geosynthetic cementitious composite mat(GCCM),vetiver grass,and a combination of GCCM and vegetation.Soil erosion and moisture levels were monitored for each land cover area during six natural rainfall events encountered over the experimental period.Field results were compared with a numerical simulation and empirical soil loss equation.The results revealed that the GCCM gave the best erosion control immediately after installation,but vetiver grass also exhibited good erosion control six months postconstruction.展开更多
The filling construction of permeable geosynthetic tubes is considered.First,an analytical approach is developed to determine the internal pressure,tension and shape of the cross section of a geosynthetic tube based o...The filling construction of permeable geosynthetic tubes is considered.First,an analytical approach is developed to determine the internal pressure,tension and shape of the cross section of a geosynthetic tube based on its volume.An analytical solution for the drainage rate of the tube is then derived.The course of the filling construction is divided into several time intervals and the volume of the tube after each interval is obtained from the equilibrium of flow calculated from the drainage rate and filling rate.The validity of our analytical approach is tested by comparing our results with previously published experimental result.The results of this comparison indicate that our method is applicable for simulating the filling construction of permeable geosynthetic tubes.展开更多
The effect of geosynthetic reinforcing on bearing capacity of a strip footing resting on georeinforced clayey slopes was investigated.The results of a series of numerical study using finite element analyses on strip f...The effect of geosynthetic reinforcing on bearing capacity of a strip footing resting on georeinforced clayey slopes was investigated.The results of a series of numerical study using finite element analyses on strip footing upon both reinforced and unreinforced clayey slopes were presented.The objectives of this work are to:1) determine the influence of reinforcement on the bearing-capacity of the strip footings adjacent slopes,2) suggest an optimum number of reinforcement and 3) survey the effect of friction angle in clayey soils reinforced by geogrids.The investigations were carried out by varying the edge distance of the footing from slope.Also different numbers of geosynthetic layers were applied to obtaining the maximum bearing capacity and minimum settlement.To achieve the third objective,two different friction angles were used.The results show that the load?settlement behavior and ultimate bearing capacity of footing can be considerably improved by the inclusion of reinforcing layer.But using more than one layer reinforcement,the ultimate bearing capacity does not change considerably.It is also shown that for both reinforced and unreinforced slopes,the bearing capacity increases with an increase in edge distance.In addition,as the soil friction angle is increased,the efficiency of reinforcing reduces.展开更多
Soft clays are problematic soils as they present high compressibility and low shear strength.There are several methods for improving in situ conditions of soft clays.Based on the geotechnical problem’s geometry and c...Soft clays are problematic soils as they present high compressibility and low shear strength.There are several methods for improving in situ conditions of soft clays.Based on the geotechnical problem’s geometry and characteristics,the in situ conditions may require reinforcement to restrain instability and construction settlements.Granular columns reinforced by geosynthetic material are widely used to reduce settlements of embankments on soft clays.They also accelerate the consolidation rate by reducing the drainage path’s length and increasing the foundation soil’s bearing capacity.In this study,the performance of encased and layered granular columns in soft clay is investigated and discussed.The numerical results show the significance of geosynthetic stiffness and the column length on the embankment settlements.Furthermore,the results show that granular columns may play an important role in dissipating the excess pore water pressures and accelerating the consolidation settlements of embankments on soft clays.展开更多
According to relevant new regulations in China,a composite liner system involving geosynthetic materials must be installed at the bottom of an expanded landfill.The deformation and integrity of the composite liner und...According to relevant new regulations in China,a composite liner system involving geosynthetic materials must be installed at the bottom of an expanded landfill.The deformation and integrity of the composite liner under a variety of factors are important issue to be considered in the design of a landfill expansion.In this paper,we investigate the strain distribution in geosynthetic materials within the composite liner system of expanded landfills,including strains in geosynthetic materials resulting from overall settlement and lateral movement of landfills,localized subsidence in landfills,and differential settlement around gas venting wells.The allowable strains of geosynthetic materials are discussed based on the results of tensile tests,and the corresponding design criteria for composite liner systems are proposed.Meanwhile,practical measures allowing strain control in geosynthetic materials used in landfill engineering are proposed.展开更多
A discrete element method(DEM) model was used to simulate the development of compaction-induced stress in a granular base course, with and without geogrid reinforcement. The granular base course was modeled as a mixtu...A discrete element method(DEM) model was used to simulate the development of compaction-induced stress in a granular base course, with and without geogrid reinforcement. The granular base course was modeled as a mixture of uniformly sized triangular particles. The geogrid was modeled as a series of equally spaced balls that interact with each other through long-range interaction contacts. The longrange interaction contact was also used to simulate a deformable subgrade. The compactor was modeled as a solid cylinder rolling at a constant speed. The DEM model shows that the geogridreinforced granular base course gains additional compaction-induced stress due to the residual tensile stress developed in the geogrid. The residual tensile stress in the geogrid increases with the number of compaction passes. Parametric analyses were also conducted to assess the effects of geogrid stiffness and subgrade modulus on the compaction-induced stress.展开更多
A procedure of kinematic analysis is presented in this study to assess the reinforcement force of geosynthetics required under seismic loadings, particularly for steep slopes which are hardly able to maintain its stab...A procedure of kinematic analysis is presented in this study to assess the reinforcement force of geosynthetics required under seismic loadings, particularly for steep slopes which are hardly able to maintain its stability. Note that curved sloping surfaces widely exist in natural slopes, but existing literatures were mainly focusing on a planar surface in theoretical derivation, due to complicated calculations. Moreover, the non-uniform soil properties cannot be accounted for in conventional upper bound analysis. Pseudo-dynamic approach is used to represent horizontal and vertical accelerations which vary with time and space. In an effort to resolve the above problems, the discretization technique is developed to generate a discretized failure mechanism, decomposing the whole failure block into various components. An elementary analysis permits calculations of rates of work done by external and internal forces. Finally, the upper bound solution of the required reinforcement force is formulated based on the work rate-based balance equation. A parametric study is carried out to give insights on the implication of influential factors on the performance of geosynthetic-reinforced steep slopes.展开更多
In the recent past,the potential benefits of wraparound geosynthetic reinforcement technique for constructing the reinforced soil foundations have been reported.This paper presents the experimental study on the behavi...In the recent past,the potential benefits of wraparound geosynthetic reinforcement technique for constructing the reinforced soil foundations have been reported.This paper presents the experimental study on the behaviour of model strip footing resting on sandy soil bed reinforced with geosynthetic in wraparound and planar forms under monotonic and repeated loadings.The geosynthetic layers were laid according to the reinforcement ratio to minimise the scale effect.It is found that for the same amount of reinforcement material,the wraparound reinforced model resulted in less settlement in comparison to planar reinforced models.The efficiency of wraparound reinforced model increased with the increase in load amplitude and the rate of total cumulative settlement substantially decreased with the increase in number of load cycles.The wraparound reinforced model has shown about 45% lower average total settlement in comparison to unreinforced model,while the double-layer reinforced model has about 41% lower average total settlement at the cost of approximately twice the material and 1.5 times the occupied land width ratio.Moreover,wraparound models have shown much greater stability in comparison to their counterpart models when subjected to incremental repeated loading.展开更多
In a landfill, excessive tensile strains or failure of the liner system due to localized subsidence underneath the geosynthetic liner, is a concern in design and operation of the landfill. The localized subsidence can...In a landfill, excessive tensile strains or failure of the liner system due to localized subsidence underneath the geosynthetic liner, is a concern in design and operation of the landfill. The localized subsidence can be commonly withstood by reinforcements such as geogrids. A total of nine model tests were carried out to study the influence of soil arching in overburden sandy soil on the geosynthetics and the interaction between the soil and the geosynthetics. The localized subsidence was modeled by a strip trapdoor under the geosynthetic reinforcements. The reinforcement includes several layers of polyvinylchlorid （PVC） membrane or both PVC membrane and a compacted clay layer. Test results show that the vertical soil pressure acting on the geosynthetics within the subsidence zone is strongly related to the deflection of the geosynthefics. The soil pressure acting on the deflected geosynthetics will decrease to a minimum value with respect to its deflection if the final deflection is large enough, and this minimum value is almost independent of the overburden height. Otherwise, the deflection of geosynthetics cannot result in a full degree of soil arching, and the soil pressure within the subsidence zone increases with the increase of overburden height. Deflections and strains of the geosynthetics obviously decrease with the increase of their tensile stiffness. The presence of a compacted clay layer buffer can therefore reduce both deflections and strains of the geosynthetics. Finally, a composite liner structure is recommended for landfills to withstand the localized subsidences.展开更多
Earth structures, such as roadways, embankments and slopes, and earth retaining walls, have been commonly used in cold regions for transportation and other applications. In addition to typical design considerations fo...Earth structures, such as roadways, embankments and slopes, and earth retaining walls, have been commonly used in cold regions for transportation and other applications. In addition to typical design considerations for earth structures at normal temperature, a design must also consider the unique problems associated with low temperature, such as frost heave, lateral expansion, thaw settlement and weakening, and degradation of material properties. Geosynthetics have been used in cold regions to stabilize earth structures during construction and mitigate potential problems during their service at low tem- perature. This paper provides a state of practice review of the use of geosynthetics for performance enhancement of earth structures in cold regions. This paper starts with basic information on available geosynthetic products and their functions, evaluates properties and behavior of geosynthetics and soil-geosynthetic systems at low temperature, and discusses past studies and their key results on the use of geosynthetics to enhance the performance of roadways, embankments, and earth retaining walls in cold regions. This review reveals that geosynthetics at low temperature have higher tensile strength and stiffness, lower creep rate, and lower elongation at failure. The effect of temperature becomes significant when nonwoven geotextiles are subjected to moistening and soil intrusion at subfreezing temperature. Freeze-thaw cycles may degrade hydraulic and mechanical properties of geosynthetic-soil systems. The inclusion of geosynthetics in soil provides drainage and/or barrier to water flow, retains mechanical properties, and reduces frost heave during and after freeze-thaw cycles. Effectiveness of geosynthetics has been confirmed in the field in bridging over voids, stabilizing roadways over temper- ature-susceptible soils during thaw, and proving drainage and barrier to temperature-susceptible soils before freeze. To avoid frost heave and lateral expansion of backfill in earth retaining walls, granular fill without fines should be used. When backfill with fines is used for earth retaining walls, additional lateral earth pressure induced by soil freeze and thaw set- tlement should be considered in the design.展开更多
A new experimental approach to assess the impact of soil confinement on the long-term behavior of geosynthetics is presented in this paper.The experimental technique described herein includes a novel laboratory appara...A new experimental approach to assess the impact of soil confinement on the long-term behavior of geosynthetics is presented in this paper.The experimental technique described herein includes a novel laboratory apparatus and the use of different types of tests that allow generation of experimental data suitable for evaluation of the time-dependent behavior of geosynthetics under soil confinement.The soil-geosynthetic interaction equipment involves a rigid box capable of accommodating a cubic soil mass under plane strain conditions.A geosynthetic specimen placed horizontally at the mid-height of the soil mass is subjected to sustained vertical pressures that,in turn,induce reinforcement axial loads applied from the soil to the geosynthetic.Unlike previously reported studies on geosynthetic behavior under soil confinement,the equipment was found to be particularly versatile.With minor setup modifications,not only interaction tests but also in-isolation geosynthetic stress relaxation tests and soil-only tests under a constant strain rate can be conducted using the same device.Also,the time histories of the reinforcement loads and corresponding strains are generated throughout the test.Results from typical tests conducted using sand and a polypropylene woven geotextile are presented to illustrate the proposed experimental approach.The testing procedure was found to provide adequate measurements during tests,including good repeatability of test results.The soilegeosynthetic interaction tests were found to lead to increasing geotextile strains with time and decreasing reinforcement tension with time.The test results highlighted the importance of measuring not only the time history of displacements but also that of reinforcement loads during testing.The approach of using different types of tests to analyze the soilegeosynthetic interaction behavior is an innovation that provides relevant insight into the impact of soil confinement on the time-dependent deformations of geosynthetics.展开更多
In piled and geosynthetic-reinforced(PGR) embankment, the arching behavior determines the overburden load on piles and subsoils. Placement of geosynthetic is effective in reducing the relative displacement between pil...In piled and geosynthetic-reinforced(PGR) embankment, the arching behavior determines the overburden load on piles and subsoils. Placement of geosynthetic is effective in reducing the relative displacement between pile and subsoil. When the mobilized shear stress is less than the shear strength, partially developed arching will occur. Consequently, existing analytical methods, adopting the ultimate shear strength failure criterion, need to be improved. This study developed a simplified 2 D analytical method, which is based on the developing arching effect, to evaluate the load redistribution of the PGR embankment. Then, the influences of embankment height and internal friction angle, subsoil depth, ratio of pile cap width to pile clear spacing(RPC) and geosynthetic tensile stiffness on the critical height ratio, stress concentration ratio, soil arching ratio, geosynthetic tension and axial strain were investigated. This study suggests that a RPC of 1:1.0 and a one-way of single-layer geosynthetic tensile stiffness of 2000 kN/m should be considered as the sensitivity thresholds for the PGR embankment.展开更多
基金financially supported by the National Natural Science Foundation of China(Grants Nos.41877255,and 52078182).
文摘The tiered geosynthetic-reinforced soil (GRS) walls have been increasingly applied in the high and steep retaining soil structures. However, very little is known about the design method for the tiered GRS wall in practice. This study is aimed at proposing an upper-bound stability analysis method of a tiered GRS wall. The proposed method was firstly validated by the existing results from the centrifuge test and the numerical method, and then a parametric study was performed to investigate the effects of the cohesionless backfill friction angle φ1 and the wall geometric parameters including the offset distance, the total wall height, the batter angle δ, the number of tiers n, and wall height ratio of adjacent tiers on the dimensionless equivalent earth pressure coefficient KT. The analysis results demonstrated that as the φ1 increases, the shear strength of backfill is enhanced and thus the KT or the total reinforcement tensile force decreases, and the KT decreases with the increase of the offset distance at the initial stage and then becomes stable when it reaches a certain critical value. For a fixed offset distance, the KT or the total reinforcement tensile force decreases with the increase of the δ. For the two-tiered GRS walls having the offset distance less than the critical value, the wall with the smaller wall height ratio has a larger KT. Further, the variation of the location of the critical failure surfaces of tiered GRS walls was presented in this study with the variation of the φ1 and the wall geometry.
基金support from the National Natural Science Foundation of China(Grant Nos.52078427 and 51608461)is greatly acknowledged.
文摘Geosynthetic-encased stone column(GESC)technology for strengthening soft clay offers significant advantages in terms of cost-effectiveness,environmental sustainability,and engineering applicability.It is widely applied in treating soft foundations for railways,bridges,and embankments.This study evaluates the cyclic response of the geosynthetic-encased steel slag column(GESSC)composite foundation employing three-dimensional nonlinear finite element analysis.A numerical study is conducted to assess the cyclic response of floating GESSC considering the influence of key design variables,including cyclic load amplitude,loading frequency,geosynthetic encasement stiffness,and length-to-diameter ratio.Results show that both cyclic load amplitude and frequency affect the cumulative settlement and excess pore pressure within the GESSC foundation.Within specified limits,increasing the encasement stiffness and column length can significantly improve the GESSC load-bearing characteristics.The parametric study suggests an optimal geosynthetic encasement stiffness for the field prototype columns within the range of 4480–5760 kN/m and a critical steel slag column length of 10 times the column diameter.
基金This research work was financially supported by the National Natural Science Foundation of China(Grant Nos.52078182 and 41877255)the Tianjin Municipal Natural Science Foundation(Grant No.20JCYBJC00630).Their financial support is gratefully acknowledged.
文摘To date,few models are available in the literature to consider the creep behavior of geosynthetics when predicting the lateral deformation(d)of geosynthetics-reinforced soil(GRS)retaining walls.In this study,a general hyperbolic creep model was first introduced to describe the long-term deformation of geosynthetics,which is a function of elapsed time and two empirical parameters a and b.The conventional creep tests with three different tensile loads(Pr)were conducted on two uniaxial geogrids to determine their creep behavior,as well as the a-Pr and b-Pr relationships.The test results show that increasing Pr accelerates the development of creep deformation for both geogrids.Meanwhile,a and b respectively show exponential and negatively linear relationships with Pr,which were confirmed by abundant experimental data available in other studies.Based on the above creep model and relationships,an accurate and reliable analytical model was then proposed for predicting the time-dependent d of GRS walls with modular block facing,which was further validated using a relevant numerical investigation from the previous literature.Performance evaluation and comparison of the proposed model with six available prediction models were performed.Then a parametric study was carried out to evaluate the effects of wall height,vertical spacing of geogrids,unit weight and internal friction angle of backfills,and factor of safety against pullout on d at the end of construction and 5 years afterwards.The findings show that the creep effect not only promotes d but also raises the elevation of the maximum d along the wall height.Finally,the limitations and application prospects of the proposed model were discussed and analyzed.
文摘A stable surface to move manpower and equipment is a key for the construction operations. To create a stable road surface, the road construction techniques are time-consuming and expensive for a traditional construction which requires compaction of soil, aggregate base, sub-base and asphaltic layers. A Geosynthetic Access Mat (GAM) system can serve as an alternative to other traditional construction techniques to accommodate temporary construction. Due to its rigidity, the mat system can provide substantial vertical resistance to the applied load under a large deflection subject to soil conditions. This paper provides details of GAM specifications, soil conditions, applications, installation procedure, comparison with other soil stabilization methods and Aramco experience for deployments of these mats.
基金Foundation item： Project（51278216） supported by the National Natural Science Foundation of China Project（11-2-05） supported by the Scientific and Technological Project for Shanxi Communication Construction, China Project（HF-08-01-2011-240） supported by the Graduates＇ Innovation Fund of Huazhong University of Science and Technology, China
文摘Geosynthetic-reinforced and pile-supported （GRPS） embankment has been increasingly constructed in a large number of regions and for a wide range of projects in the past decades. However, many disadvantages are exposed through a lot of applications on conventional technique of GRPS embankment （called CT embankment）, i.e., intolerable settlement and lateral displacement, low geosynthetic efficiency, etc. In view of these disadvantages, the fixed geosynthetic technique of GRPS embankment （called FGT embankment） is developed in this work. In this system, the geosynthetic is fixed on the pile head by the steel bar fulcrum and concrete fixed top. The principles and construction techniques involved in the FGT embankment are described firstly. Then, the numerical analysis method and two-stage analysis method are used to study the performance of FGT embankment, respectively. It is shown that the FGT embankment can provide a better improvement technique to construct a high embankment over soft ground.
文摘The reinforcement effects of geosynthetics in thick soft subsoil case and thin soft subsoil case are studied in this paper,and a Duncan Chang nonlinear numerical model based on the finite element method (FEM) is developed.Moreover,an important conclusion that the thickness of soft subsoil affects greatly the geotechnical behavior of geosynthetic reinforced embankments is drawn.A series of embankment built on soft subsoil is calculated using the FEM program.The results of the computer program,such as the lateral displacements,settlements,and stress level and shear stresses in the subsoil,are presented in great detail and the comparison of those results disposes clearly the huge discrepancy of reinforce benefit between the thick subsoil embankment and thin subsoil embankment.Reinforcement mechanism of geosynthetics is also discussed in this paper and several conclusions are reached.This paper also gives recommendations for design.
基金National Key Research and Development Project of China(No.2017FB0310902)。
文摘Dense pre-hydrated geosynthetic clay liners(DPH GCLs)were manufactured as innovative materials accompanied by the advantage of lower hydraulic conductivity(k).The k of DPH GCLs permeated with de-ionized water(DIW)was 9.8×10^(−12) m/s.The effect of Cu^(2+)synthetic solution on DPH GCLs was discussed.Furthermore,the effect mechanism was studied on the basis of test technologies.A significant adverse impact on hydraulic performance of DPH GCLs is found when the concentration of Cu^(2+)is greater than 1 g/L.SEM,XRD,XRF,FTIR,and XPS analyses show that the effect of Cu^(2+)on DPH GCLs includes two steps.Firstly,Cu^(2+)interacts with hydrophobic organic matter(HOM),and the adhesion of bentonite is destroyed,and some holes appear.The Cu^(2+)contacts with bentonite directly,and Cu^(2+)interacts with bentonite through ion exchange.Passivated phenomenon occurs on the surface of the bentonite,and swelling ability of bentonite is reduced,which causes permeable DPH GCLs.
文摘In this paper,more than 70 large-scale pullout tests were performed to evaluate the performance of an innovative composite geosynthetic strip(CGS)reinforcement in sandy backfill.The CGS reinforcement is composed of a geosynthetic strip(GS)and parts of a scrap truck tire as transverse members.The experimental pullout results for the CGS reinforcement were compared with the suggested theoretical equations and ordinary reinforcements,including the GS,the steel strip(SS),and the steel strip with rib(SSR).The pullout test results show that adding three transverse members to the GS reinforcement(CGS3)with S/H?6.6(where S and H are the space and height of the transverse members,respectively)increases pullout resistance by more than 120%,170%,and 50%compared to the GS,the SS,and the SSR,respectively.This result shows that the CGS3(CGS with three transverse members)reinforcement needs at least 55.5%,63%,and 33.3%smaller length compared to the GS,the SS,and the SSR,respectively.In general,implementation of mechanically stabilized earth wall(MSEW)with the proposed strip may help geotechnical engineers prevent costly designs and solve the problem of MSEW implementation in cases where there are limitations of space.
基金supported by the Thailand Research Fund(Grant No.DBG-6180004)the Ratchadapisek Sompoch Endowment Fund(2020)of Chulalongkorn University(Grant No.763014 Climate Change and Disaster Management Cluster)。
文摘An understanding of how different land covers affect soil erosion caused by rainfall is necessary in mountainous areas.The land cover usually plays an important role in controlling landslide hazards associated with these terrains.This paper presents the results of a field experiment where several types of land covers were placed on a full-scale embankment as erosion control.An 8 m wide,21 m long,and 3 m high embankment with a 45°side-slope was built with lateric soil.The soil was compacted under a relative compaction of 70%to simulate a natural soil slope.Two sides of the embankment were divided into six land cover areas,with three different areas of bare soil,and one each of a geosynthetic cementitious composite mat(GCCM),vetiver grass,and a combination of GCCM and vegetation.Soil erosion and moisture levels were monitored for each land cover area during six natural rainfall events encountered over the experimental period.Field results were compared with a numerical simulation and empirical soil loss equation.The results revealed that the GCCM gave the best erosion control immediately after installation,but vetiver grass also exhibited good erosion control six months postconstruction.
基金Project (No. KYJD09036) supported by the Fundamental Research Funds for the Central Universities,China
文摘The filling construction of permeable geosynthetic tubes is considered.First,an analytical approach is developed to determine the internal pressure,tension and shape of the cross section of a geosynthetic tube based on its volume.An analytical solution for the drainage rate of the tube is then derived.The course of the filling construction is divided into several time intervals and the volume of the tube after each interval is obtained from the equilibrium of flow calculated from the drainage rate and filling rate.The validity of our analytical approach is tested by comparing our results with previously published experimental result.The results of this comparison indicate that our method is applicable for simulating the filling construction of permeable geosynthetic tubes.
文摘The effect of geosynthetic reinforcing on bearing capacity of a strip footing resting on georeinforced clayey slopes was investigated.The results of a series of numerical study using finite element analyses on strip footing upon both reinforced and unreinforced clayey slopes were presented.The objectives of this work are to:1) determine the influence of reinforcement on the bearing-capacity of the strip footings adjacent slopes,2) suggest an optimum number of reinforcement and 3) survey the effect of friction angle in clayey soils reinforced by geogrids.The investigations were carried out by varying the edge distance of the footing from slope.Also different numbers of geosynthetic layers were applied to obtaining the maximum bearing capacity and minimum settlement.To achieve the third objective,two different friction angles were used.The results show that the load?settlement behavior and ultimate bearing capacity of footing can be considerably improved by the inclusion of reinforcing layer.But using more than one layer reinforcement,the ultimate bearing capacity does not change considerably.It is also shown that for both reinforced and unreinforced slopes,the bearing capacity increases with an increase in edge distance.In addition,as the soil friction angle is increased,the efficiency of reinforcing reduces.
文摘Soft clays are problematic soils as they present high compressibility and low shear strength.There are several methods for improving in situ conditions of soft clays.Based on the geotechnical problem’s geometry and characteristics,the in situ conditions may require reinforcement to restrain instability and construction settlements.Granular columns reinforced by geosynthetic material are widely used to reduce settlements of embankments on soft clays.They also accelerate the consolidation rate by reducing the drainage path’s length and increasing the foundation soil’s bearing capacity.In this study,the performance of encased and layered granular columns in soft clay is investigated and discussed.The numerical results show the significance of geosynthetic stiffness and the column length on the embankment settlements.Furthermore,the results show that granular columns may play an important role in dissipating the excess pore water pressures and accelerating the consolidation settlements of embankments on soft clays.
基金Supported by the National Natural Science Foundation of China (50538080)
文摘According to relevant new regulations in China,a composite liner system involving geosynthetic materials must be installed at the bottom of an expanded landfill.The deformation and integrity of the composite liner under a variety of factors are important issue to be considered in the design of a landfill expansion.In this paper,we investigate the strain distribution in geosynthetic materials within the composite liner system of expanded landfills,including strains in geosynthetic materials resulting from overall settlement and lateral movement of landfills,localized subsidence in landfills,and differential settlement around gas venting wells.The allowable strains of geosynthetic materials are discussed based on the results of tensile tests,and the corresponding design criteria for composite liner systems are proposed.Meanwhile,practical measures allowing strain control in geosynthetic materials used in landfill engineering are proposed.
基金supported by the Southern Plain Transportation Center(SPTC)under Award No.SPTC 15.1e06
文摘A discrete element method(DEM) model was used to simulate the development of compaction-induced stress in a granular base course, with and without geogrid reinforcement. The granular base course was modeled as a mixture of uniformly sized triangular particles. The geogrid was modeled as a series of equally spaced balls that interact with each other through long-range interaction contacts. The longrange interaction contact was also used to simulate a deformable subgrade. The compactor was modeled as a solid cylinder rolling at a constant speed. The DEM model shows that the geogridreinforced granular base course gains additional compaction-induced stress due to the residual tensile stress developed in the geogrid. The residual tensile stress in the geogrid increases with the number of compaction passes. Parametric analyses were also conducted to assess the effects of geogrid stiffness and subgrade modulus on the compaction-induced stress.
文摘A procedure of kinematic analysis is presented in this study to assess the reinforcement force of geosynthetics required under seismic loadings, particularly for steep slopes which are hardly able to maintain its stability. Note that curved sloping surfaces widely exist in natural slopes, but existing literatures were mainly focusing on a planar surface in theoretical derivation, due to complicated calculations. Moreover, the non-uniform soil properties cannot be accounted for in conventional upper bound analysis. Pseudo-dynamic approach is used to represent horizontal and vertical accelerations which vary with time and space. In an effort to resolve the above problems, the discretization technique is developed to generate a discretized failure mechanism, decomposing the whole failure block into various components. An elementary analysis permits calculations of rates of work done by external and internal forces. Finally, the upper bound solution of the required reinforcement force is formulated based on the work rate-based balance equation. A parametric study is carried out to give insights on the implication of influential factors on the performance of geosynthetic-reinforced steep slopes.
基金funded by the Higher Education Commission(HEC),Government of the Islamic Republic of Pakistan and Edith Cowan University,Perth,Australia。
文摘In the recent past,the potential benefits of wraparound geosynthetic reinforcement technique for constructing the reinforced soil foundations have been reported.This paper presents the experimental study on the behaviour of model strip footing resting on sandy soil bed reinforced with geosynthetic in wraparound and planar forms under monotonic and repeated loadings.The geosynthetic layers were laid according to the reinforcement ratio to minimise the scale effect.It is found that for the same amount of reinforcement material,the wraparound reinforced model resulted in less settlement in comparison to planar reinforced models.The efficiency of wraparound reinforced model increased with the increase in load amplitude and the rate of total cumulative settlement substantially decreased with the increase in number of load cycles.The wraparound reinforced model has shown about 45% lower average total settlement in comparison to unreinforced model,while the double-layer reinforced model has about 41% lower average total settlement at the cost of approximately twice the material and 1.5 times the occupied land width ratio.Moreover,wraparound models have shown much greater stability in comparison to their counterpart models when subjected to incremental repeated loading.
基金supported by the National Basic Research Program of China(No. 2012CB719800)the National Natural Science Foundation of China (No. 51127005)the Key Innovative Team Program of Zhejiang Province (No. 2009R50050), China
文摘In a landfill, excessive tensile strains or failure of the liner system due to localized subsidence underneath the geosynthetic liner, is a concern in design and operation of the landfill. The localized subsidence can be commonly withstood by reinforcements such as geogrids. A total of nine model tests were carried out to study the influence of soil arching in overburden sandy soil on the geosynthetics and the interaction between the soil and the geosynthetics. The localized subsidence was modeled by a strip trapdoor under the geosynthetic reinforcements. The reinforcement includes several layers of polyvinylchlorid （PVC） membrane or both PVC membrane and a compacted clay layer. Test results show that the vertical soil pressure acting on the geosynthetics within the subsidence zone is strongly related to the deflection of the geosynthefics. The soil pressure acting on the deflected geosynthetics will decrease to a minimum value with respect to its deflection if the final deflection is large enough, and this minimum value is almost independent of the overburden height. Otherwise, the deflection of geosynthetics cannot result in a full degree of soil arching, and the soil pressure within the subsidence zone increases with the increase of overburden height. Deflections and strains of the geosynthetics obviously decrease with the increase of their tensile stiffness. The presence of a compacted clay layer buffer can therefore reduce both deflections and strains of the geosynthetics. Finally, a composite liner structure is recommended for landfills to withstand the localized subsidences.
基金provided by Prof. JianKun Liu at Beijing Jiatong University through the National Basic Research Program of China (973 Program, No. 2012CB026104) for technical exchange at Beijing Jiatong University in May 2013 and research result presentation at the 1st International Symposium on Transportation Soil Engineering in Cold Regions held in Xining, China from Oct. 10 to 11, 2013
文摘Earth structures, such as roadways, embankments and slopes, and earth retaining walls, have been commonly used in cold regions for transportation and other applications. In addition to typical design considerations for earth structures at normal temperature, a design must also consider the unique problems associated with low temperature, such as frost heave, lateral expansion, thaw settlement and weakening, and degradation of material properties. Geosynthetics have been used in cold regions to stabilize earth structures during construction and mitigate potential problems during their service at low tem- perature. This paper provides a state of practice review of the use of geosynthetics for performance enhancement of earth structures in cold regions. This paper starts with basic information on available geosynthetic products and their functions, evaluates properties and behavior of geosynthetics and soil-geosynthetic systems at low temperature, and discusses past studies and their key results on the use of geosynthetics to enhance the performance of roadways, embankments, and earth retaining walls in cold regions. This review reveals that geosynthetics at low temperature have higher tensile strength and stiffness, lower creep rate, and lower elongation at failure. The effect of temperature becomes significant when nonwoven geotextiles are subjected to moistening and soil intrusion at subfreezing temperature. Freeze-thaw cycles may degrade hydraulic and mechanical properties of geosynthetic-soil systems. The inclusion of geosynthetics in soil provides drainage and/or barrier to water flow, retains mechanical properties, and reduces frost heave during and after freeze-thaw cycles. Effectiveness of geosynthetics has been confirmed in the field in bridging over voids, stabilizing roadways over temper- ature-susceptible soils during thaw, and proving drainage and barrier to temperature-susceptible soils before freeze. To avoid frost heave and lateral expansion of backfill in earth retaining walls, granular fill without fines should be used. When backfill with fines is used for earth retaining walls, additional lateral earth pressure induced by soil freeze and thaw set- tlement should be considered in the design.
基金This paper is dedicated to Benedito Bueno(in memoriam),a brilliant researcher and former professor at University of São Paulo,to whom the authors are indebted for his vision and enormous contribution during the development of this work.This study was financed in part by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior(CAPES),Brazil(finance code 001).
文摘A new experimental approach to assess the impact of soil confinement on the long-term behavior of geosynthetics is presented in this paper.The experimental technique described herein includes a novel laboratory apparatus and the use of different types of tests that allow generation of experimental data suitable for evaluation of the time-dependent behavior of geosynthetics under soil confinement.The soil-geosynthetic interaction equipment involves a rigid box capable of accommodating a cubic soil mass under plane strain conditions.A geosynthetic specimen placed horizontally at the mid-height of the soil mass is subjected to sustained vertical pressures that,in turn,induce reinforcement axial loads applied from the soil to the geosynthetic.Unlike previously reported studies on geosynthetic behavior under soil confinement,the equipment was found to be particularly versatile.With minor setup modifications,not only interaction tests but also in-isolation geosynthetic stress relaxation tests and soil-only tests under a constant strain rate can be conducted using the same device.Also,the time histories of the reinforcement loads and corresponding strains are generated throughout the test.Results from typical tests conducted using sand and a polypropylene woven geotextile are presented to illustrate the proposed experimental approach.The testing procedure was found to provide adequate measurements during tests,including good repeatability of test results.The soilegeosynthetic interaction tests were found to lead to increasing geotextile strains with time and decreasing reinforcement tension with time.The test results highlighted the importance of measuring not only the time history of displacements but also that of reinforcement loads during testing.The approach of using different types of tests to analyze the soilegeosynthetic interaction behavior is an innovation that provides relevant insight into the impact of soil confinement on the time-dependent deformations of geosynthetics.
基金Project(51508279) supported by the National Natural Science Foundation of ChinaProject(KFJ170104) supported by the Open Fund of National Engineering Laboratory of Highway Maintenance Technology of Changsha University of Science & Technology, China+1 种基金Project(BK20150885) supported by the Jiangsu Provincial Natural Science Fund, ChinaProject(2019003) supported by the Key Laboratory of Ministry of Education for Geomechanics and Embankment Engineering of Hohai University, China。
文摘In piled and geosynthetic-reinforced(PGR) embankment, the arching behavior determines the overburden load on piles and subsoils. Placement of geosynthetic is effective in reducing the relative displacement between pile and subsoil. When the mobilized shear stress is less than the shear strength, partially developed arching will occur. Consequently, existing analytical methods, adopting the ultimate shear strength failure criterion, need to be improved. This study developed a simplified 2 D analytical method, which is based on the developing arching effect, to evaluate the load redistribution of the PGR embankment. Then, the influences of embankment height and internal friction angle, subsoil depth, ratio of pile cap width to pile clear spacing(RPC) and geosynthetic tensile stiffness on the critical height ratio, stress concentration ratio, soil arching ratio, geosynthetic tension and axial strain were investigated. This study suggests that a RPC of 1:1.0 and a one-way of single-layer geosynthetic tensile stiffness of 2000 kN/m should be considered as the sensitivity thresholds for the PGR embankment.
